990851007F
NHTSA communication ID: 10246571
NHTSA source summary · Original PDF not reviewed by Recallfolio
Refinishing Aluminum Wheels
Source components: WHEELS.
Source record 10246571 at NHTSAThe manufacturer’s record · Page 23 of 23
2015 GMC SIERRA 2500
Manufacturer communications & TSBs.Page 23
Original record summaries, dates and identifiers for this model-year. Records 2,201–2,215 of 2,215, ordered newest first. Dated records on this page: Dec 1, 2013–Feb 1, 2014.
Back to 2015 GMC SIERRA 2500 problems & recallsRead the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
140604003
NHTSA communication ID: 10246495
NHTSA source summary · Original PDF not reviewed by Recallfolio
Identifying Non-GM ECM Calibration Use and Power-Up Hardware Detection in Duramax® Diesel Engines Using GDS 2
Source components: BACK OVER PREVENTION · FUEL SYSTEM, DIESEL · FUEL SYSTEM, GASOLINE.
Source record 10246495 at NHTSA120310002A
NHTSA communication ID: 10245771
NHTSA source summary · Original PDF not reviewed by Recallfolio
Proper Wheel Installation and Wheel Torque Techniques
Source components: TIRES · UNKNOWN OR OTHER · WHEELS · WHEELS:LUGS/NUTS/BOLTS/STUDS.
Source record 10245771 at NHTSA120310001A
NHTSA communication ID: 10245768
NHTSA source summary · Original PDF not reviewed by Recallfolio
Vibration Shortly After Tires are Mounted/Preventing Vibration from Wheel Slip
Source components: SUSPENSION · SUSPENSION: ADJUSTMENT:MANUAL · TIRES:BEAD · WHEELS.
Source record 10245768 at NHTSA99-08-51-007F
NHTSA communication ID: 10190932
NHTSA source summary · Original PDF not reviewed by Recallfolio
Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · WHEELS.
Source record 10190932 at NHTSA99-08-51-007F
NHTSA communication ID: 10190931
NHTSA source summary · Original PDF not reviewed by Recallfolio
Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · WHEELS.
Source record 10190931 at NHTSAPI1180
NHTSA communication ID: 10070192
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: EQUIPMENT.
Source record 10070192 at NHTSA04-00-89-053F
NHTSA communication ID: 10137784
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information for the dealer technician to gather as much information to help aid Engineers by completely filling out requested reports.
Source components: EQUIPMENT.
Source record 10137784 at NHTSA11-00-89-002B
NHTSA communication ID: 10137781
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin was created to inform that any accessories that are install from the GM factory will be covered under the standard vehicle warranty and dealer installed accessories will be cover for a full year (12months).
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10137781 at NHTSAPIP5092A
NHTSA communication ID: 10112006
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that a driveline noise or vibration at various speeds and operating conditions. Technician should be advised that the vehicle should always be restored to a factory configuration when diagnosing noise and vibration concerns.
Source components: PARKING BRAKE:DRIVELINE.
Source record 10112006 at NHTSAPIP5089A
NHTSA communication ID: 10112005
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code C0569 that will not clear. Technician should be advised if there are any issues with the rotational position sensor, incremental position sensor, encoder motor, motor A or B circuits, rotational position sensor or incremental position sensor circuits when the transfer case control module attempts to determine location the location cannot be determined correctly.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING.
Source record 10112005 at NHTSAPI0369D
NHTSA communication ID: 10190935
NHTSA source summary · Original PDF not reviewed by Recallfolio
Frame Labels Visible from Outside of Vehicle Some customers may comment on disliking the appearance of the white labels that are visible on the frame The frame labels are only required during the manufacturing process and can be removed during pre-delivery inspection (PDI). There are two labels on the frame: the left front label (1) visible underneath the driver's door and the right front label (2) visible through the wheelhouse. Use care when removing the labels to prevent damage to the wax coating on the frame. Use a plastic trim tool to lift up on the edge and then pull the label off. The time required to perform this action is included in the PDI base time.
Source components: EQUIPMENT:OTHER:LABELS.
Source record 10190935 at NHTSAPI0281D
NHTSA communication ID: 10190934
NHTSA source summary · Original PDF not reviewed by Recallfolio
Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
Source components: EQUIPMENT ADAPTIVE/MOBILITY · STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS.
Source record 10190934 at NHTSAPI0281D
NHTSA communication ID: 10190933
NHTSA source summary · Original PDF not reviewed by Recallfolio
Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
Source components: EQUIPMENT ADAPTIVE/MOBILITY · STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS.
Source record 10190933 at NHTSAPIP4793H
NHTSA communication ID: 10253138
NHTSA source summary · Original PDF not reviewed by Recallfolio
Transmission Valve Body.
Source components: POWER TRAIN.
Source record 10253138 at NHTSA