The manufacturer’s record · Page 16 of 31
Original record summaries, dates and identifiers for this model-year. Records 1,501–1,600 of 3,022, ordered newest first. Dated records on this page: Oct 30, 2015–Feb 12, 2016.
Back to 2014 GMC SIERRA 1500 problems & recallsThis archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
NHTSA communication ID: 10116891
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on Clarification of Use - Dealer Empowerment Labor Operations and Customer Enthusiasm (U.S. Only)
Source components: EQUIPMENT ADAPTIVE/MOBILITY · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10116891 at NHTSANHTSA communication ID: 10116890
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides an out line on Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage and what should be considered warranty replacement and not
Source components: EXTERIOR LIGHTING:BACK UP LIGHTS · EXTERIOR LIGHTING:BRAKE LIGHTS · EXTERIOR LIGHTING:HEADLIGHTS.
Source record 10116890 at NHTSANHTSA communication ID: 10096033
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN BEFORE REPLACING THE CRANKSHAFT TO REVIEW THE FOLLOWING. DEALER SHOULD COMPLETE THE SERVICE INFORMATION DIAGNOSTICS AND THE COST COMPARISON WORKSHEET FOR ASSEMBLY REPAIR VS REPLACEMENT. TECHNICIAN WILL USE THE LATEST VERSION OF 09-06-04-026G TO VERIFY THE ECM CALIBRATION IS NOT AN AFTERMARKET CALIBRATION. IF THE CUSTOMER PREFERS TO KEEP THE ORIGINAL NUMBERS MATCHING ENGINE PLEASE CALL TAC FOR REPAIR DIRECTION.
Source components: ENGINE.
Source record 10096033 at NHTSANHTSA communication ID: 10116888
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on Unscheduled Supplemental Services (Including Flushing Services and Additives) and Proper Use of GM Simplified Maintenance Schedules (U.S. Only)
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10116888 at NHTSANHTSA communication ID: 10096213
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN THAT SOME VEHICLES MAY HAVE INSTRUMENT PANEL CLUSTER, RADIO, AND HEATER-VENT-AIR CONDITIONING DISPLAYS BLANKING OUT. ALSO BLUETOOTH DEVICES MAY DROP CONNECTION OR THE RADIO VOLUME CHANGES WHEN OPERATING THE SNOW PLOW. TECHNICIAN WILL REPLACE THE SNOW PLOW JUMPER HARNESS.
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER · EQUIPMENT:ELECTRICAL.
Source record 10096213 at NHTSANHTSA communication ID: 10096208
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ON THE STEPS TO DIAGNOSE AND REPAIR VEHICLES THAT MAY HAVE ISSUES WERE THE CUSTOMER WILL NEED INCREASED EFFORT TO DEPRESS THE BRAKE PEDAL. TECHNICIAN MAY FIND FLUID IN THE BRAKE BOOSTER AND/OR THE BOOSTER VACUUM LINE. TECHNICIAN WILL NEED TO REPLACE VACUUM PUMP, BRAKE BOOSTER, MASTER CYLINDER, VACUUM PUMP BELT AND THE VACUUM LINE BETWEEN THE BOOSTER AND THE PUMP.
Source components: SERVICE BRAKES.
Source record 10096208 at NHTSANHTSA communication ID: 10116878
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides Information on Inappropriate Warranty Claims Submitted for Damaged Radios and Instrument Panel Clusters (IPCs)
Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10116878 at NHTSANHTSA communication ID: 10095901
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES THAT MAY HAVE A COLD ENGINE TICK NOISE FOR 50 SECONDS AT START UP. TECHNICIAN DETERMINES IF THE TICK NOISE IS POSSIBLY COMING FROM THE EXHAUST MANIFOLD, AS THIS NOISE COULD EASILY BE MISTAKEN FOR AN ENGINE TICK NOISE. IF YOUR SI DIAGNOSIS DOES NOT ISOLATE THE CAUSE OF THIS CONCERN, THIS CONCERN SHOULD BE CONSIDERED A VEHICLE DESIGN CHARACTERISTIC OF THE ECM CALIBRATION AND NO ADDITIONAL REPAIRS SHOULD BE PERFORMED.
Source components: ENGINE.
Source record 10095901 at NHTSANHTSA communication ID: 10116874
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on exterior lamp condinsation and replacement guidelines
Source components: EXTERIOR LIGHTING:HEADLIGHTS.
Source record 10116874 at NHTSANHTSA communication ID: 10096054
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN THAT SOME VEHICLES MAY HAVE A HIGH PITCHED WHINE NOISE FROM THE VEHICLE NOTICED WHEN DRIVING IN AUTO 4WD. WHEN THE TRANSFER CASE CONTROL MODULE HAS TO MOVE THE TRANSFER CASE ACTUATOR MOTOR THE HIGHER CURRENT PASSING THROUGH THE MODULE CAUSES AN "ELECTRONIC BUZZ OR WHINE" WITHIN SOME OF THE CAPACITORS IN THE MODULE THAT CAN BE HEARD BY SOME OF OUR CUSTOMERS. THIS CAN ONLY BE HEARD WITH ALL ACCESSORIES AND HVAC OFF AND ONLY WHEN ACTUATOR MOVEMENT IS REQUIRED. THIS DOES NOT INDICATE A CONCERN WITH THE MODULE AND SHOULD NOT BE REPLACED TO ADDRESS THIS CONCERN.
Source components: EQUIPMENT · POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE).
Source record 10096054 at NHTSANHTSA communication ID: 10116872
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides a procedure on how to remove door trim panles and replace chime speaker pigtail connectors for vehicles with the condition of intermittent loss of chime from speaker
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10116872 at NHTSANHTSA communication ID: 10116871
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on how to properly repair rust on the hem flange on doors for vehicles that have the condition of rust showing at hem flange
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10116871 at NHTSANHTSA communication ID: 10096079
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN THAT SOME VEHICLE MAY HAVE AN EXHAUST FLUID QUALITY POOR ON THE DRIVER INFORMATION CENTER OR A DIESEL EXHAUST FLUID WARNING LAMP ON OR OTHER EXHAUST FLUID QUALITY RELATED CONCERNS. TECHNICIAN WILL INSPECT THE DIESEL EXHAUST FLUID FOR CONTAMINATION. TECHNICIAN SHOULD USE SERVICE INFORMATION FOR CONTAMINANTS IN DIESEL EXHAUST FLUID DIAGNOSIS AND USE SPECIAL TOOL J26568 OR EN50422 DIESEL EXHAUST FLUID REFRACTOMETER FOR FLUID TESTING.
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
Source record 10096079 at NHTSANHTSA communication ID: 10095683
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ON VEHICLES THAT MAY HAVE AN INTERMITTENT HIGH IDLE. IF A TECHNICIAN HAS DUPLICATED, OR THE CUSTOMER DESCRIPTION ALIGNS WITH THE SPEEDS MENTIONED IN THE IDLE SPEED DESCRIPTION TABLES, THE IDLE SPEED SHOULD BE CONSIDERED A NORMAL CHARACTERISTIC OF CURRENT VEHICLE DESIGN.
Source components: ENGINE · EQUIPMENT.
Source record 10095683 at NHTSANHTSA communication ID: 10116863
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on Behavior of Non-Upgraded OnStar Equipped Vehicles Operating in Canada after Decommissioning of 2G CDMA Cellular Networks
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10116863 at NHTSANHTSA communication ID: 10114376
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have a grind, pop, shudder or bind feeling/noise in the steering column when turning left or right. Technician will inspect for the lower column bearing to be out of position and the upper intermediate steering shaft to lower column shaft bolt and nut may be contacting the inhibitor/shiftier cable bracket. Technician will replace the steering column for this concern.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10114376 at NHTSANHTSA communication ID: 10095352
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ON HOW TO DIAGNOSE AND REPAIR VEHICLES THAT MAY HAVE A GRIND, POP, SHUDDER OR BIND FEELING/NOISE IN THE STEERING COLUMN WHEN TURNING LEFT OR RIGHT. TECHNICIAN WILL INSPECT FOR THE LOWER COLUMN BEARING TO BE OUT OF POSITION AND THE UPPER INTERMEDIATE STEERING SHAFT TO LOWER COLUMN SHAFT BOLT AND NUT MAY BE CONTACTING THE INHIBITOR/SHIFTIER CABLE BRACKET. TECHNICIAN WILL REPLACE THE STEERING COLUMN FOR THIS CONCERN.
Source components: STEERING:COLUMN.
Source record 10095352 at NHTSANHTSA communication ID: 10112304
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides a procedure to replace a body plug to correct a body plugs vivible on vehicles equipped with 6 inch oval accessory chrome assist steps condition
Source components: EQUIPMENT · STRUCTURE.
Source record 10112304 at NHTSANHTSA communication ID: 10112302
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides Information on Passenger Presence Sensing System (PPS or PSS) Concerns with Custom Upholstery, Accessory Seat Heaters or Other Comfort Enhancing Devices
Source components: AIR BAGS:SENSOR:OCCUPANT CLASSIFICATION · SEATS · SEATS:FRONT ASSEMBLY:SEAT HEATER/COOLER.
Source record 10112302 at NHTSANHTSA communication ID: 10112299
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on Part Restriction and Ordering Process Information for OnStar Vehicle Communication Interface Modules (VCIM) (GMNA Only)
Source components: EQUIPMENT:ELECTRICAL · EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).
Source record 10112299 at NHTSANHTSA communication ID: 10112287
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides a procedure to apply dielectric grease and a piece of adhesive shim stock to the steering angle sensor connector to correct a condition of service stabilitak message displayed in DIC and DTC C0455 or C0710
Source components: STEERING · STEERING:ELECTRIC POWER ASSIST SYSTEM.
Source record 10112287 at NHTSANHTSA communication ID: 10252174
NHTSA source summary · Original PDF not reviewed by Recallfolio
Radio Inoperative with No Communication and DTC U0184
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10252174 at NHTSANHTSA communication ID: 10075739
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may comment about a rough idle and/or vibration at idle in Drive. This condition may be most noticeable following extended driving, while idling at a stop in Drive. May feel like a lopey or lumpy idle, or may be described as a low idle. This condition will not be present in Park, Reverse, or Neutral. There will not be any DTCs with this concern. When measuring using the vibration analyzer, CH-51450-A (Pico Oscilloscope), With the pico accelerometer positioned on forward end of the seat track; the concern will show in the lateral / cross-car direction as E1.5 (1.5 engine order), in the range of 2-7 mg.
Source components: ENGINE.
Source record 10075739 at NHTSANHTSA communication ID: 10114675
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a lifter that has collapsed and is stuck in the lifter bore when completing 15-06-01-002A. Technician will use vice grips with a slide hammer to remove the lifter. Or the technician can use vice grip and a pry bar. If the lifter will not come out the engine will need to be replaced.
Source components: EQUIPMENT ADAPTIVE/MOBILITY · EQUIPMENT:MECHANICAL.
Source record 10114675 at NHTSANHTSA communication ID: 10112278
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides a procedure to flush and bleed the power steering system to correct a condition of power steering noise or fluid leak from power steering pump, gear or high pressure hose during extreme low temperature conditions.
Source components: STEERING:HYDRAULIC POWER ASSIST SYSTEM.
Source record 10112278 at NHTSANHTSA communication ID: 10112277
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides a procedure to update your apple product to the latest software version to correct a condition of infotainment system will not return to media after bluetooth call ends
Source components: ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT:ELECTRICAL.
Source record 10112277 at NHTSANHTSA communication ID: 10075754
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL.
Source record 10075754 at NHTSANHTSA communication ID: 10245974
NHTSA source summary · Original PDF not reviewed by Recallfolio
Installation Of An Aftermarket Trailer Brake Controller In Lieu Of Factory Trailer Brake Controller.
Source components: TRAILER HITCHES.
Source record 10245974 at NHTSANHTSA communication ID: 10075750
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL.
Source record 10075750 at NHTSANHTSA communication ID: 10112272
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on close coupled converters and there affect on newly installed engines or engines during there break in period.
Source components: ENGINE.
Source record 10112272 at NHTSANHTSA communication ID: 10246963
NHTSA source summary · Original PDF not reviewed by Recallfolio
Changing Turn-By-Turn Voice Response To Metric Or English Units
Source components: EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).
Source record 10246963 at NHTSANHTSA communication ID: 10075745
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER.
Source record 10075745 at NHTSANHTSA communication ID: 10112264
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on removing paint stains on the under side of protective shipping film
Source components: STRUCTURE:BODY.
Source record 10112264 at NHTSANHTSA communication ID: 10250067
NHTSA source summary · Original PDF not reviewed by Recallfolio
Infotainment System Will Not Return to Media After Bluetooth Call Ends
Source components: EQUIPMENT:ELECTRICAL:INFOTAINMENT.
Source record 10250067 at NHTSANHTSA communication ID: 10246639
NHTSA source summary · Original PDF not reviewed by Recallfolio
Power Steering Noise or Fluid Leak from Power Steering Pump, Gear or High Pressure Hose During Extreme Low Temperature Conditions
Source components: STEERING.
Source record 10246639 at NHTSANHTSA communication ID: 10115002
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles with engine oil consumption. If published Service Information for oil consumption with no fix. Remove the vacuum line from the back of the vacuum pump and inspect for oil. If oil is found then reference the latest version of PIT5361.
Source components: ENGINE · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10115002 at NHTSANHTSA communication ID: 10115000
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a vibration that is felt between 1200 ? 1400 engine revolutions per minute when in active fuel management V4 mode. Technician will need to use J?38792-A Electronic Vibration Analyzer 2 or CH?51450-NVH Pico Oscilloscope Diagnostic Kit to measure the frequency of the vibration. Technician will need to remove and replace the exhaust muffler clamp that joins the three-way catalytic converter assembly to the pipe of the muffler assembly. After the exhaust is reinstalled remove and reinstall each cab mounts and retest.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR.
Source record 10115000 at NHTSANHTSA communication ID: 10114998
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles with Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0101. Technician should follow published Service Information diagnostics for any Diagnostic Trouble Codes that are set. If during diagnosis the tech has found that the Airflow Leak Equivalency Ratio or Induction System Leak Indication is above or below the specification the tech will have to carefully check for leaks in the air intake.
Source components: ENGINE · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10114998 at NHTSANHTSA communication ID: 10114989
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician how to diagnose vehicles with the CD player inoperative. If this concern is encountered, cycle the CD player fuse and re-evaluate the concern. If the concern is no longer present, replace the CD player. When the CD player is still found to be inoperative after cycling the fuse follow Service Information diagnostics.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10114989 at NHTSANHTSA communication ID: 10114978
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about the compass on the radio display always shows North. Technician should update the radio with the latest calibrations.
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10114978 at NHTSANHTSA communication ID: 10114977
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about what XM offerings are available for vehicles. A dealer or customer can access the website listed below for vehicle specific XM offerings and availability.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · EQUIPMENT:ELECTRICAL.
Source record 10114977 at NHTSANHTSA communication ID: 10114969
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides additional information to the technician when replacing the Duramax Diesel head gasket. This is a supplement to procedure found in Service Information. The left and right cylinder head gaskets are not interchangeable and will block oil and coolant passages if installed incorrectly resulting in severe damage to the engine. Technician is not use any power sanding devices, wire brush or wheel as well as any chemical cleaning agents to clean the gasket surface. Leave the gaskets in the package until the surfaces are ready to install them. Do not set the gaskets on workbenches or tool boxes to avoid introduction of foreign debris. The cylinder head surface is not to be machined measure the head for warpage with a straight edge and feeler gauge replacing the head with warpage in excess of .1 millimeter. All M12 head bolts must be replaced however the M8 bolts can be reused. Install 2 head bolts secured at minimal torque to minimize the chance of introducing foreign material. Use a paint pen on the M12 bolts marking the head of each bolt indicating which of the 4 torque steps have been completed to prevent missing a step or doing a step twice.
Source components: ENGINE AND ENGINE COOLING · ENGINE AND ENGINE COOLING:ENGINE:DIESEL · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10114969 at NHTSANHTSA communication ID: 10114968
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have "Exhaust Fluid Low", "Exhaust Fluid Empty - Refill Now", "Exhaust Fluid Range: XXX" or "Service Exhaust Fluid - See Owners Now" on the Driver Information Center. If the technician is working on 2010 and 2011 model years campaign 11001 has now been released. Other vehicles technician will need to check the Body Control Module and the scan tool to insure the latest calibration are installed in both. Then use the scan tool to check Reductant System Data in the Engine Control Module. Ensure that all three diesel exhaust fluid level sensors are active with the diesel exhaust fluid tank level showing 100%. If the tank level is below 100% add up to 2 gallons of diesel exhaust fluid. After adding the fluid, use a scan tool to reset the reductant fluid tank level. When the reductant level warning shows "none" the diesel exhaust fluid system reset and reprogram is complete.
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
Source record 10114968 at NHTSANHTSA communication ID: 10114958
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician on the step needed to diagnose and repair vehicles that may have uneven brake pad wear. Technician will need to inspect and measure the brake pads thickness. Also determine the customer?s driving style. The disc brake pads should only be replaced if the friction surface is worn to within?2.0?mm (0.079?in) of the mounting plates. The rotors and pads should be replaced with the updated part number If the pads are out of specification, perform normal Service Information diagnostics to determine the cause of the concern.
Source components: SERVICE BRAKES, HYDRAULIC.
Source record 10114958 at NHTSANHTSA communication ID: 10114954
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0442. Technician will need to review Techlink article from May 2013 titled "Using the Evaporative Emissions System Tester" Technician will need to follow these steps to help diagnose the issue. First after the P0442 has been verified do not disturb any of the fuel system components. The technician now can use the scan tool to close the Evaporative Emissions System. If possible change the tank pressure sensor units from inch_H2O to milimeter_Hg for better resolution. Now the vehicle can be stared to monitor the tank pressure sensor output value for approximately two minutes. If the tank pressure sensor value does change, pressurize the fuel tank side of the purge solenoid with the GE 41413-A / J 41413-A and the necessary adaptors. Now add smoke and allow pressure to stabilize for 2 minutes. If smoke is allowed to pass through the purge solenoid, replace the purge solenoid. If the tank pressure sensor value does not change, then install CH-48096 adaptor between the purge line from the canister and the purge solenoid. With the Evaporative Emissions System closed, pressurize the system through the CH-48096 adaptor and allow the system to completely stabilize, by observing the Press / Vac Gauge for a minimum of 5 minutes. Now add smoke to the system with GE 41413-A / J 41413-A after system stabilization. Now inspect the purge solenoid, engine side, fuel cap, canister vent solenoid filter and any line quick connects. When the leak is unable to be located, test under a vacuum condition. his type of leak may be detected by using the scan tool Purge/Seal function to create a vacuum in the Evaporative Emissions System and then observe the FTP sensor parameter for vacuum decay.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL · FUEL SYSTEM, GASOLINE · FUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY.
Source record 10114954 at NHTSANHTSA communication ID: 10250048
NHTSA source summary · Original PDF not reviewed by Recallfolio
Clunking Noise from Front of Vehicle During Turns and/or Bumps
Source components: BACK OVER PREVENTION.
Source record 10250048 at NHTSANHTSA communication ID: 10250047
NHTSA source summary · Original PDF not reviewed by Recallfolio
Clunking Noise from Front of Vehicle During Turns and/or Bumps
Source components: BACK OVER PREVENTION.
Source record 10250047 at NHTSANHTSA communication ID: 10246600
NHTSA source summary · Original PDF not reviewed by Recallfolio
Information on Exhaust Fluid Range, Exhaust Fluid Quality Poor, Service Exhaust Fluid System or Service Emission System Driver Information Center Messages
Source components: AIR BAGS.
Source record 10246600 at NHTSANHTSA communication ID: 10246535
NHTSA source summary · Original PDF not reviewed by Recallfolio
Clunking Noise from Front of Vehicle During Turns and/or Bumps
Source components: SUSPENSION.
Source record 10246535 at NHTSANHTSA communication ID: 10246534
NHTSA source summary · Original PDF not reviewed by Recallfolio
Clunking Noise from Front of Vehicle During Turns and/or Bumps
Source components: SUSPENSION.
Source record 10246534 at NHTSANHTSA communication ID: 10201125
NHTSA source summary · Original PDF not reviewed by Recallfolio
Information on Inside Rear view Mirror and Camera Loose
Source components: BACK OVER PREVENTION · FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA · VISIBILITY:REARVIEW MIRRORS/DEVICES:INTERIOR.
Source record 10201125 at NHTSANHTSA communication ID: 10201122
NHTSA source summary · Original PDF not reviewed by Recallfolio
Greese or Sealant Visible on Steering Gear - Should not be interpreted as Leak
Source components: EQUIPMENT · STEERING.
Source record 10201122 at NHTSANHTSA communication ID: 10201117
NHTSA source summary · Original PDF not reviewed by Recallfolio
Clunking Noise from Front of Vehicle During Turns and/or Bumps
Source components: EQUIPMENT · STRUCTURE:FRAME AND MEMBERS.
Source record 10201117 at NHTSANHTSA communication ID: 10201115
NHTSA source summary · Original PDF not reviewed by Recallfolio
OnStar Voice Fallback Number Update
Source components: COMMUNICATION:MANUFACTURER TELEMATICS · EQUIPMENT:ELECTRICAL.
Source record 10201115 at NHTSANHTSA communication ID: 10201107
NHTSA source summary · Original PDF not reviewed by Recallfolio
Fuel Odor During Fuel Filling or During Idle, Possible P0442 or P0455 DTC SET
Source components: FUEL/PROPULSION SYSTEM.
Source record 10201107 at NHTSANHTSA communication ID: 10201104
NHTSA source summary · Original PDF not reviewed by Recallfolio
Information on Exhaust fluid range, exhaust fluid quality poor, service exhaust fluid system or service emission system driver information Center Messages
Source components: ENGINE.
Source record 10201104 at NHTSANHTSA communication ID: 10201103
NHTSA source summary · Original PDF not reviewed by Recallfolio
Clean Exhaust Filter see owners manual now or cleaning exhaust filter keep driving until message is cleared displayed on DIC, DTC P2463 May be set
Source components: ENGINE · EQUIPMENT.
Source record 10201103 at NHTSANHTSA communication ID: 10201101
NHTSA source summary · Original PDF not reviewed by Recallfolio
Information on Mounting Points for Pickup Box Accessories
Source components: EQUIPMENT.
Source record 10201101 at NHTSANHTSA communication ID: 10201100
NHTSA source summary · Original PDF not reviewed by Recallfolio
New Tool Availability - EN-48974-EGR Cooler Pressure Tester Adapter Set to Diagnose Duramax Diesel Engine EGR Cooler Engine Coolant Leaks into Combustion Chamber
Source components: ENGINE · ENGINE AND ENGINE COOLING · ENGINE AND ENGINE COOLING:ENGINE:DIESEL.
Source record 10201100 at NHTSANHTSA communication ID: 10201098
NHTSA source summary · Original PDF not reviewed by Recallfolio
OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
Source components: ENGINE · POWER TRAIN · POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10201098 at NHTSANHTSA communication ID: 10201097
NHTSA source summary · Original PDF not reviewed by Recallfolio
Information on Diesel Engine Ticking Noise
Source components: ENGINE · ENGINE AND ENGINE COOLING:ENGINE:DIESEL.
Source record 10201097 at NHTSANHTSA communication ID: 10190535
NHTSA source summary · Original PDF not reviewed by Recallfolio
Information on Inside Rear View Mirror and Camera Loose Some customers may comment that the inside rear view mirror or front camera is loose or that the mirror/camera mounting bracket is loose or has fallen off. If a vehicle is encountered with the above condition, do not attempt to reinstall the bracket onto the windshield. The above listed vehicles have a revised bracket design that is not serviceable. It is necessary to replace the windshield glass assembly. The bracket comes installed on the new glass assembly. Refer to Windshield Replacement in SI.
Source components: ELECTRICAL SYSTEM:ADAS:DRIVER MONITORING:CAMERA/SENSOR · VISIBILITY:REARVIEW MIRRORS/DEVICES.
Source record 10190535 at NHTSANHTSA communication ID: 10190521
NHTSA source summary · Original PDF not reviewed by Recallfolio
Clunking Noise from Front of Vehicle During Turns and/or Bumps Some customers may comment on a clunking noise originating from the front of the vehicle that is more predominant during turns or traveling over bumps. This may be caused by a damaged stabilizer shaft frame bracket. There have been some cases in which the bracket is cracked, as shown. This condition has been found to be the result of insufficient welds between the bracket and frame rail. There have been some cases on older vehicles of corrosion affecting the bracket
Source components: SUSPENSION:FRONT.
Source record 10190521 at NHTSANHTSA communication ID: 10190506
NHTSA source summary · Original PDF not reviewed by Recallfolio
Information on Exhaust Fluid Range, Exhaust Fluid Quality Poor, Service Exhaust Fluid System or Service Emission System Driver Information Center Messages
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL.
Source record 10190506 at NHTSANHTSA communication ID: 10190503
NHTSA source summary · Original PDF not reviewed by Recallfolio
OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
Source components: ENGINE · POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10190503 at NHTSANHTSA communication ID: 10190502
NHTSA source summary · Original PDF not reviewed by Recallfolio
Information on Diesel Engine Ticking Noise
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL.
Source record 10190502 at NHTSANHTSA communication ID: 10190383
NHTSA source summary · Original PDF not reviewed by Recallfolio
Fuel Odor During Fuel Filling or During Idle, Possible P0442 or P0455 DTCs Set Some customers may comment on a strong fuel odor during fuel filling or during vehicle idle. Cause This may be caused by the fracture or breaking of the gasoline filler neck recirculation line connector Correction If you encounter a vehicle with the above concern, complete the following procedure: 1. Raise the vehicle and visually inspect the fuel tank filler vent hose connector for damage. Refer to Lifting and Jacking the Vehicle in SI. If connector is damaged, replace the fuel tank filler vent hose. Refer to Fuel Tank Filler Vent Hose Replacement in SI. If there is no damage to the connector, continue diagnosis referring to SI.
Source components: FUEL SYSTEM, OTHER.
Source record 10190383 at NHTSANHTSA communication ID: 10190381
NHTSA source summary · Original PDF not reviewed by Recallfolio
CLEAN EXHAUST FILTER SEE OWNERS MANUAL NOW or CLEANING EXHAUST FILTER KEEP DRIVING UNTIL MESSAGE IS CLEARED Displayed on DIC, DTC P2463 May Be Set
Source components: ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:FILTER/SCREEN · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
Source record 10190381 at NHTSANHTSA communication ID: 10190379
NHTSA source summary · Original PDF not reviewed by Recallfolio
New Tool Availability EN-48974 EGR Cooler Pressure Tester Adapter Set to Diagnose Duramax® Diesel Engine EGR Cooler Engine Coolant Leaks into Combustion Chamber
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE) · EQUIPMENT.
Source record 10190379 at NHTSANHTSA communication ID: 10137258
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information for technicians on the reuse of fasteners and the proper reading of torque specifications.
Source components: EQUIPMENT.
Source record 10137258 at NHTSANHTSA communication ID: 10115143
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the grounds ring terminal at the engine block for the bank with the concern and repair the wire.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR.
Source record 10115143 at NHTSANHTSA communication ID: 10115142
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have the oil pressure gauge jumps from approximately 40 lb. to 60 lb. The 4.3L (L83), 5.3L (L86), 6.2L (LV3) engines are equipped with a two stage oil pump. Dealer should advise the customer this is normal operation for these engines.
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10115142 at NHTSANHTSA communication ID: 10137255
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides additional information to the technician on how to check for Tire Radial Force Variations and the difference between balancing a flange and flangeless rim.
Source components: TIRES · TIRES:BEAD · TIRES:TREAD/BELT · WHEELS:RIM.
Source record 10137255 at NHTSANHTSA communication ID: 10115139
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician that steps to diagnose and repair vehicles that have a vibration in the 30-40 MPH range. Technician will need to visually inspect the propeller shaft if Pico readings indicate a propeller shaft 1 disturbance. Technician will need to inspect for obvious signs of damage to the propeller shaft, dents, scrapes, and under coating. If the propeller shaft is damaged replace the propeller shaft. If propeller shaft inspection does not indicate any concerns, then record Pico readings with the sensor placed inside the vehicle where the vibration is felt the most. Technician should rotate the propeller shaft 180 degrees at the rear flange and re-evaluate. If propeller shaft re-indexing does not correct concern, see the appropriate section of the latest version of PI1354 and if further assistance is needed see the latest version of PIP5338 prior to contacting General Motors Technical Assistance Center at the number you have been provided for further assistance.
Source components: EQUIPMENT ADAPTIVE/MOBILITY · STEERING:GEAR BOX:SHAFT SECTOR.
Source record 10115139 at NHTSANHTSA communication ID: 10115138
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have had multiple repair attempts are being performed on customer?s vehicles that exhibit vibration conditions without utilizing the support of General Motors Technical Assistance Center. If valid vibration frequency or Road Force Variation data has been collected and a repair attempt does not correct the customer complaint, contact General Motors Technical Assistance Center for further support. For any vehicles that remains unrepaired after being at the dealer for three days or more and a related bulletin or PI is not found, contact General Motors Technical Assistance Center for further support.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · SUSPENSION.
Source record 10115138 at NHTSANHTSA communication ID: 10115137
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have a bump feel or clunk noise at a stop or on launch. Dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle. The bump clunk issue may be due to fuel movement in the fuel tank when not completely full. The condition is eliminated after completely filling the fuel tank.
Source components: FUEL SYSTEM, GASOLINE · FUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY.
Source record 10115137 at NHTSANHTSA communication ID: 10115135
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have the rear vision camera system displaying "Rear Park Assist Symbols Unavailable" and the steering grid lines displayed do not show. If the vehicle is in reverse, the rear vision camera will display "Rear Park Assist Symbols Unavailable" and does not have Regular Production Option Code UD5 or UD7 the radio must be updated using Service Programming System to correct this concern. Some vehicles may not show steering guide/grid lines displayed in the Rear Vision Camera display. Dealer should communicate to the customer that steering guide/grid lines are not available with this base radio Regular Production Option Code (IO3). Some vehicles while in reverse and the rear park assist system detects an object, the warning triangle symbol is displayed on the wrong side of the radio display. Engineering is aware of the issue and updated radio/tuner calibrations will be released shortly.
Source components: ELECTRICAL SYSTEM · LANE DEPARTURE · STEERING.
Source record 10115135 at NHTSANHTSA communication ID: 10137253
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides repair information to correct a customer concern of engine misfire/tick noise, Malfunction Indicator Lamp (MIL) On, DTC P0300 set.
Source components: ENGINE.
Source record 10137253 at NHTSANHTSA communication ID: 10115132
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a loud chime. Technician will need to Service Programming System program the radio with the latest calibrations.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10115132 at NHTSANHTSA communication ID: 10115128
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicle's odometer appears to be inaccurate relative to a known distance traveled. Technician should obtain a hand-held GPS unit to test the odometer. If a hand held GPS unit is not available, the only other option is to verify the miles traveled using a surveyor's wheel or a dynamometer.
Source components: EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).
Source record 10115128 at NHTSANHTSA communication ID: 10137249
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on a GM of Canada OnStar cellular communication upgrade.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10137249 at NHTSANHTSA communication ID: 10137248
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides windshield replacement information to correct a customer concern that the inside rear view mirror is loose or that the mirror mounting bracket is loose or has fallen off.
Source components: VISIBILITY:REARVIEW MIRRORS/DEVICES · VISIBILITY:WINDSHIELD.
Source record 10137248 at NHTSANHTSA communication ID: 10137246
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on a GM of Canada OnStar cellular communication upgrade.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10137246 at NHTSANHTSA communication ID: 10137245
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information to dealership personnel regarding original equipment battery part numbers and AC Delco replacement battery approved warranty part numbers.
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY · EQUIPMENT:ELECTRICAL.
Source record 10137245 at NHTSANHTSA communication ID: 10115121
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician about vehicles that will not save a navigation address as a radio favorite. Technician will need to update the Human Machine Interface to repair the concern.
Source components: EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).
Source record 10115121 at NHTSANHTSA communication ID: 10137237
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin adds the 2016 model year to a communication which provides dealership personnel revised wiring repair labor operations and required additional information.
Source components: ELECTRICAL SYSTEM:WIRING.
Source record 10137237 at NHTSANHTSA communication ID: 10137232
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides repair information to correct customer concerns about blank screen after startup and reverse, rear view camera message on, touch screen inoperable, Bluetooth and navigation concerns.
Source components: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA · EQUIPMENT:ELECTRICAL.
Source record 10137232 at NHTSANHTSA communication ID: 10115119
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician for a reduced power message, steering assist, engine stall or the instrument panel, radio, and or Heater-Vent-Air Conditioning go blank with multiple diagnostic trouble codes. If any of the following diagnostic trouble codes U0073, U0078, U0029, U0028, U0415, U0140, U0126, U0121, U0101, U0100, C0544, U1510, U0073, B127B, B2605, B3600,C0800, U0428, and U0452 set in the vehicle. Check the body control module ground at the G218 location. The front dash insulator mat may be trapped between the ground eyelet and the body stud. Remove the round nut and eyelet and cut the front dash insulator mat away from the ground stud so it no longer interferes with the ground stud and reinstall the eyelet and ground nut.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:APPLIANCE:AIR CONDITIONER · POWER TRAIN · STEERING.
Source record 10115119 at NHTSANHTSA communication ID: 10245943
NHTSA source summary · Original PDF not reviewed by Recallfolio
Adding Integrated Trailer Brake Controller RPO JL1.
Source components: TRAILER HITCHES.
Source record 10245943 at NHTSANHTSA communication ID: 10115114
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about customers that may request the factory Integrated Trailer Brake Controller Regular Production Option Code (JL1) be installed on their Full-Size Pickup or SUV when the vehicle was not ordered with the option. Dealer should advise the customer it cannot be added to the vehicle.
Source components: ELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL.
Source record 10115114 at NHTSANHTSA communication ID: 10075749
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: SERVICE BRAKES.
Source record 10075749 at NHTSANHTSA communication ID: 10115107
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have a service engine soon malfunction indicator lamp, antilock braking system malfunction indicator lamp, service suspension system message, misfire, hesitation, no crank, heater-vent-air conditioning inoperative. Technician may find F11UA, F104UA, F35UA, and or F60UA blown. Technician should inspect the engine harness near the vacuum pump pulley to be chafing. Technician will need to reroute the wire harness and repair and damaged wires.
Source components: ELECTRICAL SYSTEM:WIRING.
Source record 10115107 at NHTSANHTSA communication ID: 10115105
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have any of these concerns remote keyless entry, passive Entry and Start Inoperative, No Fob detect message on driver information center, service tire pressure system, no audio, touch screen Inoperative, Steering Wheel Controls Inoperative, Service Stabilitrak, rear power windows inoperative, rear wiper inoperative, and or a dead battery. Technician may find Diagnostic Trouble Codes B3101, B144C, C0710, C0544, U1548, U1549, U154A, U0151, U0126, U0415, U0077, U0028 and/or U0029. Technician should inspect the left instrument panel for the wire harness being pinched. Technician will need to repair the wire harness and reroute the wire harness.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10115105 at NHTSANHTSA communication ID: 10115104
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician how to repair vehicles that Instrument Panel Cluster, Radio, and Heater-Vent-Air Conditioning display blanks out, Bluetooth phone or Pandora connection dropped, the radio station or volume changes when operating the snow plow. Please advise the customer that engineering is aware of this concern and working on this issue.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10115104 at NHTSANHTSA communication ID: 10137226
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin adds the 2016 model year to diagnostic tips and repair information to correct a customer concern of reduced acceleration at low speed and/or transmission slipping from a launch, DTC P0751 set.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10137226 at NHTSANHTSA communication ID: 10115093
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about a customer?s request to remove or disable the Bi-Fuel Compressed Natural Gas system. General Motors does not condone the removal of the original equipped Compressed Natural Gas systems.
Source components: FUEL SYSTEM, OTHER.
Source record 10115093 at NHTSANHTSA communication ID: 10190533
NHTSA source summary · Original PDF not reviewed by Recallfolio
Grease or sealant visible on steering gear - should not be interpreted as leak. Some customers or technicians may comment on seeing grease or sealant on certain locations of the steering gear. The illustrations below include arrows showing the areas on the steering gear that the supplier intentionally applies sealing grease. Any of these locations have the potential of showing visible grease under normal operation.
Source components: STEERING:GEAR BOX (OTHER THAN RACK AND PINION).
Source record 10190533 at NHTSANHTSA communication ID: 10072092
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ENGINE.
Source record 10072092 at NHTSANHTSA communication ID: 10126401
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on the PQC assembly replacement process - for dealers required to contact PQC prior to replacing an assembly (U.S. and Canada only).
Source components: STRUCTURE.
Source record 10126401 at NHTSANHTSA communication ID: 10114937
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician when Service Information diagnostics indicates a fuel injector may need to be removed for a repair or replaced the injector will need a new seal. This Preliminary Information contains all the O-ring seal and the injector kit part numbers.
Source components: FUEL SYSTEM, OTHER:FUEL INJECTION SYSTEM.
Source record 10114937 at NHTSA