Original record summaries, dates and identifiers for this model-year. Records 701–800 of 1,533, ordered newest first. Dated records on this page: Aug 22, 2014–Dec 16, 2014.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Dec 16, 2014Service Bulletin/Repair Instructions
24BG ECM
NHTSA communication ID: 10057309
NHTSA source summary · Original PDF not reviewed by Recallfolio
VOLKSWAGEN JETTA HYBRID 2013-2014: INFORMATION ON UPDATED SOFTWARE TO PREVENT ENGINE CONTROL MODULE FROM INCORRECTLY STORING SCAN TOOL MODE. *LJ
NHTSA source summary · Original PDF not reviewed by Recallfolio
When performing SVM updates, the scan tool should be hardwired to the vehicle and the Bluetooth physically turned off. A hard wired internet connection is also recommended.
Source components: ELECTRICAL SYSTEM · EQUIPMENT · EQUIPMENT:ELECTRICAL:INFOTAINMENT:BLUETOOTH/WIFI.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (SVM Update Instructions): This document informs when performing SVM updates, the scan tool should be hardwired to the vehicle and the Bluetooth physically turned off. A hard wired internet connection is also recommended.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Fuel Additive to Help Prevent Sporadic Misfire Faults): Fuel quality impacts the operating performance, efficiency and service life of the engine. The use of poor quality fuels may result in deposit build up on the fuel injectors and intake valves. This may result in a rough running condition, sporadic misfires, or cold start misfire faults storing in the ECM fault memory. This document informs a Volkswagen approved fuel additive is available to help remove and prevent deposits on fuel injectors and intake valves.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Manifold Absolute Pressure Range / Performance issues): This document informs that the monitoring strategy for the manifold absolute pressure sensor being too sensitive, causing P0106 to incorrectly set in the engine control module. The product solution for this issue was improved software.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (Electro ? Steering - DTC 01309 008 ?No Communication with -J500-? is Stored in the ABS/ESP Module Only): This document informs If, after replacement of the steering rack, fault code 01309 008 is set in the ABS/ESP module only, follow the test plan in GFF for Driver Steering Recommendation (DSR) or channel 3 activation. If the test plan fails to clear the fault, follow the directions in this document using Vehicle Self Diagnosis in Address Word 44 - Steering Assistance:
NHTSA source summary · Original PDF not reviewed by Recallfolio
Disconnect both O2 sensors (front and rear), start engine and let idle. Check MVB's 41/4 and 136/4 and verify have both changed from a 1 to a 0 (you may have to drive the car 4 miles to get them to reset to 0). Also a key cycle may be required for values to reset. This forces the ECM to re-learn the O2 sensor adaptation. Once MVB 41/4 and 136/4 read 0, re-connect the O2 sensors, road test and recheck for faults.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING · ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (Oxygen Sensor Reset Procedures): This document informs of the procedure to rest oxygen sensors -For 2009-2014 vehicles with engine codes CJAA or CBEA: -For 2012-2015 vehicles with engine codes CKRA, CVCA or CRUA:
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Front Door Locks Hard to Release): This document informs of Customers who comment that the front door is hard to open with exterior handle. For concerns of front door lock hard to release from the outside door handle, or the outside handle binds. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Electric Coolant Fans Continue to Run after Ignition is Switched OFF): This documentation informs it is considered normal operation for the electric coolant fans to continue to run for up to 15 minutes after the ignition is switched off in gasoline engine applications, and up to 16 minutes in diesel engine applications. The production solution to service this issue is that no production change is required.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Rear Disc Brakes, Replacing Rear Brake Pads and Rotors for Squeal): Rear brake pad composition may result in a squeal from the rear braking system. Condition as described DOES NOT affect brake performance. The production solution determined lead to improved rear brake pads.
NHTSA source summary · Original PDF not reviewed by Recallfolio
VOLKSWAGEN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. MALFUNCTION INDICATOR LIGHT (MIL) WOULD COME ON DUE TO AN INCORRECT READING FROM GLOW PLUG CONTROL MODULE OF THE ENGINE CONTROL MODULE (ECM). MODEL 2012-13 JETTA SPORTWAGEN. *PE
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Tech Tip was established to explain the influence the adjustable steering column tilt position has on the steering wheel being off center and to provide information on checking for steering wheel off center. Please reference VWIQ video: http://tech.vw-iq.com/video.php?id=324
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (2.0L CCTA/CBFA Coolant Leak or Repeat Coolant Leak from the Water Pump Area): Inspect the water pump for signs of contact with engine oil. Engine oil may cause the water pump gasket to swell, which may lead to a coolant leak. This document informs of the precaustions necessary if a water pump replacement is necessary.
Source components: ENGINE AND ENGINE COOLING:COOLING SYSTEM · ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (Steering Wheel Off Center): This Tech Tip was established to explain the influence the adjustable steering column tilt position has on the steering wheel being off center and to provide information on checking for steering wheel off center.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Removing Paint Contaminants from Exterior Paint): This document informs how to remove paint contaminants such as rail dust and industrial fallout from exterior paint.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Camshaft Adjustment Valve 1 -N205- Diagnosis): Completing the GFF function test and performing basic settings on the camshaft adjustment valve are essential to diagnose proper operation and to avoid unnecessary replacements. The production solution to this issue was to optimized engine cleaning procedure in production.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (ECM Fault P1250 "Fuel Level Too Low" Will Not Clear): This document informs to clear static ECM fault P1250 "Fuel Level Too Low", add fuel to vehicle and complete a road test of at least 10 miles. Simply adding fuel without completing a road test may not allow fault to clear.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (Common Rail TDI ? Fuel Filter Replacement and Prime/Bleed Procedure): This document informs when replacing fuel system components on the Common Rail TDI engine (including the fuel filter), the fuel system must be primed. The procedure should be available on most models through Guided Functions. If not shown, then access through Control Module OBD. Run ?Basic Settings block 35? three times in a row. This activates the electric fuel pumps and bleeds the fuel system. Once the system has been bled, it will be necessary to start the engine and idle for a minimum of 5 minutes before depressing the gas pedal.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Cylinder Contribution/Balance Faults): This document informs that the diagnostic strategy for zero fuel calibration too sensitive. The production solution for this issue was new Software implemented. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Update Programming RCD-510 Radio (Premium 8)): This document informs Programming contained in software level(s) 0007, 0008, 0009, 0010, 0011, 0012, 0013, 0014, 0015, 0016 for certain RCD-510 Radio (Premium 8) radios may cause Bluetooth audio quality complaints for model year 2012 (SVM 383F). Programming contained in software level 0006, 0007, 0008 for certain RCD-510 Radio (Premium 8) radios may cause Bluetooth audio quality complaints for model year 2013 (SVM 37DC). The production soluton for this issue was software updates for the 2012 and 2013 model years. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Install a vacuum gauge on the dipstick tube and check crankcase vacuum at idle. Compare to a known good vehicle. If the vacuum reading is lower than the comparison vehicle, visually inspect for oil leaks between the engine and the transmission. Smoke test the crankcase by connecting the EVAP smoke machine to the dipstick tube and inspect for leaks at the rear main seal (this will limit pressure to 2 PSI). DO NOT apply shop air to the dipstick tube or the crankcase. If a rear main seal leak is identified, replace the seal. Once replaced, recheck crankcase vacuum at idle. If low, check for additional oil leaks and verify crankcase breather operation (repairing as necessary). Erase the faults and road test 10 miles to recheck operation.
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (Window Switch Replacement): Be advised that when replacing a window switch on the listed models, make certain that the switch is not damaged during the removal process. It is preferred to use a bone tool to remove the switch from the housing as opposed to a screwdriver. This document provides examples to prevent the risk of damage
Source components: ELECTRICAL SYSTEM · VISIBILITY:POWER WINDOW DEVICES AND CONTROLS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (RNS 510? Replacement Radio/Navigation Unit has no Sound): Replacement RNS 510 radio/navigation units may be shipped in transportation safeguard mode and therefore will have no sound output. This document informs how to deactivate the safeguard mode.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some Golf, GTI, Jetta, and Passat vehicles equipped with electromechanical power steering have the G85 steering angle sensor located in the steering rack. These vehicles do not have a G85 in the steering column. To determine G85 location, check the J500 Power steering control module part number in the GFF printout. Do not use the part number on the steering rack for this check.
Source components: BACK OVER PREVENTION · ELECTRICAL SYSTEM · ELECTRICAL SYSTEM:ADAS:PARKING ASSIST:SENSORS · POWER TRAIN · STEERING · STEERING:RACK AND PINION:RACK · STEERING:STEERING CONTROL MODULE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (2009-2015 Jetta, Eos, Rabbit, Golf, GTI, Passat, CC, and Tiguan Equipped with Electromechanical Power Steering ? G85 Location Identification Tip): Ths document informs of the location of the G85 steering sensor. The sensors expected settings, and which vehicles do not have this sensor for electromechanical power steering.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Engine will not start after standing in cold weather below 0°C (32°F), MIL may be illuminated with various induction and/or boost system faults stored in ECM.
Source components: ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Glow Plug Pressure Sensor Faults): When diagnosing MIL ON with glow plug pressure sensor DTC?s it is important to perform a diagnosis prior to replacing the glow plug. This document contains the fault code interperatation after such a diagnosis. the production solution is that the codes were implementated into production. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Air Conditioning, Cleaning of the Refrigerant Circuit): In cases where an air conditioning system component (such as a compressor or other system component) has failed and debris from the compressor or component is circulated throughout the refrigerant circuit, the refrigerant circuit must be cleaned of any and all debris or damage to the replacement components will result. Debris can be dispersed throughout the refrigerant circuit after a/c component damage. In order to maintain A/C operating efficiency, it is important to flush the refrigerant circuit after A/C component repairs.
NHTSA source summary · Original PDF not reviewed by Recallfolio
When replacing the Air Conditioning compressor it is necessary to flush the entire system to remove all the PAG oil. Replacement AC compressors come with a full charge of oil. Any time another compressor is installed with a different vendor (Sanden to Denso) it is necessary to replace all the oil in the system to the new vendor type PAG oil.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Rear Disc Brakes, Replacing Rear Brake Pads and Rotors for Squeal issues): This document informs that the rear brake pad composition may result in a squeal from the rear braking system. Condition as described DOES NOT affect brake performance. The production solution for this issue was Improved rear brake pads. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Front Door Locks Hard to Release): The front door lock operation is affected by various climate or temperature conditions and as a result may require increased effort to release. Due to this the customer Customer may comment that the front door is hard to open with the exterior handle. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (Comfort Module (J393) or BCM (J519) Replacement): This document informs if a comfort or body control module is replaced during normal diagnosis, make sure the factory mode has been switched OFF. This can be accomplished by selecting guided function of either the J393 or J519 or control module OBD of J393 or J519 then selecting adaptation channel 99. Failure to deactivate factory mode will create a concern where the door locks will not lock and/or unlock with the switch and/or the remotes.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (Window Switch Replacement): This document informs that Be advised that when replacing a window switch on the listed models, that the switch is not damaged during the removal process. It is preferred to use a bone tool to remove the switch from the housing as opposed to a screwdriver, to prevent the risk of the repair being debited. The document also contains visual examples which show the part in question, and the damage that could occur.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (AC Compressor Replacement, Refrigerant Circuit Flushing Requirement): This document informs when replacing the Air Conditioning compressor it is necessary to flush the entire system to remove all the PAG oil. Replacement AC compressors come with a full charge of oil. Any time another compressor is installed with a different vendor (such as Sanden to Denso) it is necessary to replace all the oil in the system to the new vendor type PAG oil. This document also informs When installing the new AC compressor immediately transfer the AC compressor caps to the original compressor. There is also a photo to show the necessary part placement.
NHTSA source summary · Original PDF not reviewed by Recallfolio
VOLKSWAGEN: THE EXTERIOR HANDLE ON FRONT DOOR IS VERY HARD TO OPEN DUE TO VARIOUS CLIMATE OR TEMPERATURE CONDITIONS AFFECTING THE LOCK OPERATION AND MAY REQUIRE MORE OF AN EFFORT TO RELEASE. MODEL 2011-2015 JETTA (A6), GOLF/GTI (A7), BEETLE, BEETLE CONVERTIBLE, PASSAT NMS. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Exhaust Gas Recirculation Flow Insufficient, and Soot Accumulation issues): This document informs of high soot loads prior to regeneration which can cause possible restrictions in the EGR filter. The production solution to this issue was new software being implemented in current production. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Front Door Locks Hard to Release): This document informs the customer may comment that the front door is hard to open with exterior handle. This is due to the front door lock operation being affected by various climate or temperature conditions, and as a result may require increased effort to release. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Cylinder Contribution/Balance Faults): This document informs that the Diagnostic strategy for zero fuel calibration was too sensitive. The production solution for this issue was Software implemented into production. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
The DLC is intended for use with diagnostic scan tools and by emissions testing stations. However, aftermarket devices (i.e., drive data recorders) that connect to the DLC have now become available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Front Door Latches Hard to Release): This document informs the front door latch operation is affected by various climate or temperature conditions and as a result may require increased effort to release. Therefore Customers may comment that the front door is hard to open with exterior handle. This document is for informing only and informs how to service this issue.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Engine Oils Which Meet Volkswagen Oil Quality Standard): This document informs of a sample list of products generally available in the North American market that meet the Volkswagen Oil Quality Standard
NHTSA source summary · Original PDF not reviewed by Recallfolio
Use the diagram below to test the N75 Solenoid Valve in the event of a turbocharger fault code such as P0299 or P0234. This applies to Mechanical Injection Style Diesel Engines, Pumpe Duse Style Diesel Engines and the new Common Rail Style Diesel Engines.
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL · ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER · FUEL SYSTEM, DIESEL · FUEL SYSTEM, GASOLINE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
When diagnosis on the above engine leads to the testing of the N75, please refer to the picture below. The diagram shows which vacuum ports on the N75 valve should hold vacuum and which ones should not.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (TDI Engine - N75 Solenoid Valve Diagnosis): This document informs with graphical aid the testing of the N75 Solenoid Valve in the event of a turbocharger fault code such as P0299 or P0234. This applies to Mechanical Injection Style Diesel Engines, Pumpe Duse Style Diesel Engines and the new Common Rail Style Diesel Engines.
Source components: ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER · FUEL SYSTEM, DIESEL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips 92006-2014 Vehicles with 2.0T Gasoline Engine - N75 Solenoid Valve Diagnosis): When diagnosis on the above engine leads to the testing of the N75, please refer this document with graphical aid. The diagram shows which vacuum ports on the N75 valve should hold vacuum and which ones should not. Turbocharger fault codes P0299 and P0234 can be diagnosed using this test.
Source components: ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Quick Reference Update Guide: This document informs of the corresponding software/hardware and disc availability to the customer concerns about a vehicle
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (Electro - Steering issues): If, after replacement of the steering rack, fault code 01309 008 is set in the ABS/ESP module only, follow the test plan in GFF for Driver Steering Recommendation (DSR) or channel 3 activation. If the test plan fails to clear the fault, follow the directions in this document