Original record summaries, dates and identifiers for this model-year. Records 1–100 of 1,174, ordered newest first. Dated records on this page: Apr 3, 2025–Sep 8, 2026.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Sep 8, 2026Service Bulletin/Repair Instructions
9100898
NHTSA communication ID: 11037347
NHTSA source summary · Original PDF not reviewed by Recallfolio
Engine PNs: MY 24-26 WD/DT (5.7L) Code P00B is being misdiagnosed and incorrect parts are being installed causing over repair. Refer to SOL S2609000006 The IAFM Foam Engine Valley Cover (PN 53013735AB) does not provide sufficient clearance for proper routing of the MDS solenoid jumper harness (PN 05148163AE). As a result, the harness may become compressed by the foam cover. To prevent unnecessary part replacement, the MDS solenoid jumper harness (PN 05148163AE) should be inspected for damage or pinch conditions prior to replacing the following part numbers: Engine PNs: 68409343AA 68409357AA 68450915AA OCV PNs: 53022338AB Phaser PNs: 53022298AA 53022298AB
NHTSA source summary · Original PDF not reviewed by Recallfolio
For concerns of an inoperative A/C system (no relay activation, no compressor engagement, or no response to commands), technicians need to utilize Star Online Publication S2624000007 prior to component replacement. Failure to follow this star online publication may result in repeat repairs or misdiagnosis.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Instrument Panel Delamination Customers may comment on the following: ● Wrinkles or bubbles in the instrument panel cover Fig. 1. This bulletin involves inspecting and possibly replacing the instrument panel cover.
NHTSA source summary · Original PDF not reviewed by Recallfolio
3-way valves are available in STAR Parts as two distinct components and must be selected correctly based on application. The High Temp 3-way valve (68309834AC) is located between the engine and the bulkhead at the rear of the engine compartment. The Low Temp 3-way valve (68448241AA) is located between the engine and the radiator at the front of the engine. When ordering or servicing, ensure the correct valve is identified and installed in the proper location, as incorrect part selection may lead to improper thermal system operation and repeat repairs.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Radio Message "Power Surge On USB Detected" Customers may comment on the following: ● The radio displays the message: “Power surge on USB hub detected” Fig. 1. NOTE: After the message appears, no USB devices function in the hub (no charging, no data). NOTE: Hub operation does not return until the vehicle undergoes a full key cycle.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Radio Message "Power Surge On USB Detected" Customers may comment on the following: ● The radio displays the message: “Power surge on USB hub detected” Fig. 1. NOTE: After the message appears, no USB devices function in the hub (no charging, no data). NOTE: Hub operation does not return until the vehicle undergoes a full key cycle
NHTSA source summary · Original PDF not reviewed by Recallfolio
Radio Message "Power Surge On USB Detected" Customers may comment on the following: ● The radio displays the message: “Power surge on USB hub detected” Fig. 1. NOTE: After the message appears, no USB devices function in the hub (no charging, no data). NOTE: Hub operation does not return until the vehicle undergoes a full key cycle
NHTSA source summary · Original PDF not reviewed by Recallfolio
Squeak Or Squawk Noise Coming From Either Side Door Of The Vehicle, It Could Be Just One Door Or More. The Noise Can Be Present In Either The Upper Or The Lower Hinge.
NHTSA source summary · Original PDF not reviewed by Recallfolio
WARNING: Shorting the 48V output stud to the 12V output stud can cause immediate and irreversible damage to the power pack unit. Always use insulated tools and protective stud covers when performing service operations. NOTE: A loose or high resistance ground connection may result in abnormal voltage behavior and can increase the risk of electrical component damage. Always verify ground integrity before system power up. For P0AFA repair: Please follow the Service library steps 1 through 7 without fail. Only replace PPU or MGU after verifying the final step of the procedure.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0111-00 - Intake Air Temperature Sensor 1 Circuit Range Performance Bank 1. (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance. (In Active or Stored status) ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low. (In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. (In Active or Stored status) ● P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or. (In Active or Stored status) ● P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1. (In Active or Stored status) ● P05BD-00 - Stop-Start Mode Switch Range/Performance. (In Active or Stored status) ● P0116-00 - Engine Coolant Temperature Sensor 1 Performance. (In Active or Stored status) ● P062B-00 - Internal Control Module Fuel Injector Control Performance. (In Active or Stored status) ● P0604-00 - Internal Control Module Random Access Memory Ram Error. (In Active or Stored status) ● P060C-00 - Internal Control Module Main Processor Performance. (In Active or Stored status)** ● P018B-00 - Fuel Pressure Sensor "B" Circuit Range/performance. **(In Active or Stored status)** ● P1CEA-00 - Boost Side EVAP Purge System Performance. **(In Active or Stored status)** ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off. **(In Active or Stored status)** ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. **(In Active or Stored status)** ● P0300-00 - Multiple Cylinder Misfire. **(In Active or Stored status)** Customers may also experience one or more of the following: ● **Oil Level High Warning in the Instrument Panel Cluster (IPC).** ● Fully Autonomous Parking Assist (FAPA) is not deactivated when accelerator pedal is pressed. ● Vehicle is not heating up fast enough at freezi
NHTSA source summary · Original PDF not reviewed by Recallfolio
Instrument Panel Delamination Customers may comment on the following: SYMPTOM: ● Wrinkles or bubbles in the instrument panel cover Fig. 1. This bulletin replacing the instrument panel cover. NOTE: Only vehicles still under the basic warranty are covered in this TSB.
NHTSA source summary · Original PDF not reviewed by Recallfolio
The vehicle will exhibit a service transmission/check engine warning indicator for the following transmission models: 845RE, 8HP45, 850RE, 8HP50, 8HP70, 8HP75, 8HP75-PHEV, 8HP75-LCV, 8HP90, 8HP95. Transmissions may exhibit the following diagnostic codes: P07E4, P1DB2, P0716, P1B14, P0733, P1D90, P1DB7, P1B13.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Active Diagnostic Trouble Code (DTC) B1A10-00, B1A11-00, B1A12- 00, B1A13-00-, B1A14-00, B1A15-00, B1A16-00, and B1A17-00 in The Radio Frequency Hub (RFH)
NHTSA source summary · Original PDF not reviewed by Recallfolio
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
NHTSA source summary · Original PDF not reviewed by Recallfolio
Service transmission/check engine warning indicator for the 850RE, 8HP50, 8HP70, 8HP75, 8HP75-PHEV transmissions that have fault codes P07E4, P1DB2, P0716, P1B14, P0733, P1D90, P1DB7, P1B13.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS Related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
NHTSA source summary · Original PDF not reviewed by Recallfolio
Verify "Z" part number availability. Order a "Z" part number for all Exchange Orders: Warranty, Mopar, Customer pay and Service contract. Order"68" part number for New unsold units only
NHTSA source summary · Original PDF not reviewed by Recallfolio
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates
NHTSA source summary · Original PDF not reviewed by Recallfolio
Verify Reman part number availability. Order the "R" part number for all orders: Warranty, Mopar, customer pay and service contract. Order "68" part number for New unsold units only.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Park Assist Module (PAM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● B128E-25 - PTS Sensor 1-Signal Shape/Waveform Failure. ● B128F-25 - PTS Sensor 2-Signal Shape/Waveform Failure. ● B1290-25 - PTS Sensor 3-Signal Shape/Waveform Failure. ● B1291-25 - PTS Sensor 4-Signal Shape/Waveform Failure. ● B1292-25 - PTS Sensor 5-Signal Shape/Waveform Failure. ● B1293-25 - PTS Sensor 6-Signal Shape/Waveform Failure. ● B1295-25 - PTS Sensor 8-Signal Shape/Waveform Failure. ● B1296-25 - PTS Sensor 9-Signal Shape/Waveform Failure. ● B1297-25 - PTS Sensor 10-Signal Shape/Waveform Failure. ● B1298-25 - PTS Sensor 11-Signal Shape/Waveform Failure. ● B1299-25 - PTS Sensor 12-Signal Shape/Waveform Failure. **Customers must also experience one or more of the following:** ● **Park Assist is inoperative.** ● False braking alerts while backing up when there’s nothing behind the vehicle. ● When backing up, the park assist feature will apply the brakes when no object is behind the vehicle. This bulletin involves updating the PAM module with the latest available software.
NHTSA source summary · Original PDF not reviewed by Recallfolio
115V Power Outlet LED Always On The amber LED remains continuously illuminated, regardless of whether the switch button is activated. This bulletin involves replacing the inverter switch.
NHTSA source summary · Original PDF not reviewed by Recallfolio
To inform dealers about the 850RE valve body PN: R8348504A connector: the original 16-pin connector included six pins that were not used in this application. To simplify the design, the connector has been optimized and updated to a 10-pin configuration.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Hard To Fill With Fuel Customers may experience one or more of the following: ● Hard, difficult, or unable to fill the fuel tank. ● Fuel nozzle shuts off prematurely before the fuel tank is full. This bulletin involves replacing the fuel tank.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0420 - Catalyst System Efficiency Below Threshold Bank 1. ● P0430 - Catalyst System Efficiency Below Threshold Bank 2. ● P0456 - EVAP System Small Leak. ● P06EF - Engine Restart Performance. ● P0175 - Fuel System 2/1 Rich. ● P258B - Electronic Vacuum Pump Performance. ● P0128 - Thermostat Rationality. ● C0062 - Longitudinal Acceleration Sensor. In addition, the customer may experience one or more of the following: ● Vehicle fails emissions inspection testing due to OBD catalyst monitor readiness. ● Engine RPM erratic and or bucking, when accelerating after slowing down. ● Occasional engine shut off while shifting from 4WD low to 2WD. ● Improvements to the vacuum pump cycle time. ● Rough idle after cold start. This bulletin involves reprogramming the PCM with the latest available software.
NHTSA source summary · Original PDF not reviewed by Recallfolio
When replacing a camshaft and parts kit (P/N 68661146xx and/or 68661147xx), it is NOT necessary to order the roller-finger followers (rocker arms) separately, as these are included in the camshaft parts kit.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Powertrain Control Module (PCM) Updates *Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0420 - Catalyst System Efficiency Below Threshold Bank 1. ● P0430 - Catalyst System Efficiency Below Threshold Bank 2.** ● P0456 - EVAP System Small Leak. ● P06EF - Engine Restart Performance. ● P0175 - Fuel System 2/1 Rich. ● P258B - Electronic Vacuum Pump Performance. ● P0128 - Thermostat Rationality. ● C0062 - Longitudinal Acceleration Sensor. In addition, the customer may experience one or more of the following: ● **Vehicle fails emissions inspection testing due to OBD catalyst monitor readiness.** ● Engine RPM erratic and or bucking, when accelerating after slowing down. ● Occasional engine shut off while shifting from 4WD low to 2WD. ● Improvements to the vacuum pump cycle time. ● Rough idle after cold start. This bulletin involves reprogramming the PCM with the latest available software.
NHTSA source summary · Original PDF not reviewed by Recallfolio
ADJUSTER Valve Lash Customer's complaint may include a ticking noise coming from the engine. Technician's observations can refer to spongy or stuck hydraulic lash adjusters. Exhaust lash adjusters found with a "spongy" condition (compressible plunger) leading to the assumption of being defective/malfunctioning. EXHAUST lash adjusters are designed to be COMPRESSIBLE by hand. Intake lash adjusters found with a stiff or stuck condition (non-compressible plunger) leading to the assumption of being defective/malfunctioning. INTAKE lash adjusters are designed to be NON COMPRESSIBLE by hand. Do Not Replace EXHAUST lash adjusters when the following condition is present: should be compressible, but they will exert a reactionary spring force during compression and return to full expansion without a compression force. Do Not Replace INTAKE lash adjusters when the following condition is present: should feel very firm and difficult to compress. Once the correct functioning of the intake and exhaust lash adjusters is validated with the procedure above, refer to the Service Manual "HYDRAULIC LIFTER(S) NOISE DIAGNOSIS" procedure. After the corresponding service procedures from the Service Manual involving the Lash Adjusters have been conducted, refer to the detailed instructions in the Service Manual to diagnose and/or service any other component.
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Hard To Fill With Fuel Customers may experience one or more of the following: ● Hard, difficult, or unable to fill the fuel tank. ● Fuel nozzle shuts off prematurely before the fuel tank is full. This bulletin involves replacing the fuel tank."
NHTSA source summary · Original PDF not reviewed by Recallfolio
LAMP Courtesy/Ambient Courtesy / Ambient Lamp: Light guide not fully seated into the retainer during IP sub-assembly due to inconsistent operator installation effort, leading to latent BSR issue that manifests under customer usage conditions. Solution: remove and reinstall light guide to be fully seated in the bracket retainer.
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Misfire Diagnostic Trouble Codes (DTCs), Rough Idle, Valvetrain Noise Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0301 - Cylinder 1 Misfire. ● P0302 - Cylinder 2 Misfire. ● P0303 - Cylinder 3 Misfire. ● P0304 - Cylinder 4 Misfire. ● P0305 - Cylinder 5 Misfire. ● P0306 - Cylinder 6 Misfire. Customers may comment on one or more of the following: ● Rough idle. ● Valvetrain noise. "
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Front Drive Unit Vibrates Customers may experience the following: ● Vibration in the front of the vehicle from the front drive unit This bulletin involves replacing the right front output shaft."
NHTSA source summary · Original PDF not reviewed by Recallfolio
Transmission "Transmission For transmission concerns related to DTCs P0733-00, P1DA8-00, and/or P1D92-00, a repair is available, and transmission replacement is NOT required. Please reference TSB 21-009-25 Rev. A, for details on D-clutch replacement. Please also note, visible ""glitter"" or debris in the pan and fluid color/condition/odor is NOT an indicator of transmission health and should not be used as the reason for unit replacement. Complete unit replacements instead of repairs for these DTCs may be subject to chargeback."
NHTSA source summary · Original PDF not reviewed by Recallfolio
3.6L PSU Long Block Misfire DTC codes and/or rough idle and/or valvetrain noise. Refer to SOL # S2509000004. It is also important to confirm that the vehicle being repaired has the latest calibration/software update for oil pump operation mode (high pressure mode) during engine start up. RU, VF, WL & WD vehicles already include the latest oil pump mode in all 25MY and beyond. 24MY service releases are also available. JL & JT were updated as a running change in 24MY and beyond (08/15/24 & 08/19/24 respectively). 24MY service releases available. DT was updated starting 25MY and beyond. If the vehicle to be repaired is a 24MY vehicle with a service release available, please follow the released service procedures to update to the corresponding calibration/software.