2024 Jeep GRAND CHEROKEE Manufacturer communications & TSBs.Page 2
Original record summaries, dates and identifiers for this model-year. Records 101–200 of 545, ordered newest first. Dated records on this page: Oct 3, 2025–Apr 3, 2026.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Apr 3, 2026Service Bulletin/Repair Instructions
08-143-26
NHTSA communication ID: 11031224
NHTSA source summary · Original PDF not reviewed by Recallfolio
Traffic Sign Assist Unavailable – Service Required The customer may experience one or more of the following: SYMPTOM: ● “Traffic Sign Assist Unavailable – Service Required” message and icon displays on the Instrument Panel Cluster (IPC). This occurs after a remote start and typically at the first start of the day. ● The Odometer flashes when the traffic alert message is active. . No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC.
NHTSA source summary · Original PDF not reviewed by Recallfolio
TBM2.0H Setting U0080-00. Do not replace TBM ECU or SGW. Under certain conditions, SGW Module may take longer to establish Ethernet communication after boot up. If it takes longer than 30 seconds, The TBM2.0H module will set DTC U0080 - Ethernet Bus 1. As soon as SGW responds, the TBM2.0H will demature the DTC and move it to STORED. This issue should not cause any customer related symptoms. Do not replace the following TBM Part Numbers: WL: 68639445AF,68637489AE,68663479AE. WS: 68734941AA,68729188AC. EJ: 68592344AI. KM: 68592343AL,68735975AD. DT: 68634362AJ,68624784AF,68624784AE,68735493AB,68735493AA. DJ (HDCC): 68608721AJ. If the TBM2.0H module has set the DTC U0080 and it is STORED or ACTIVE, please clear the fault and do nothing. No further diagnostics is required. ---------------------------------------------------------------------------------------------------- TBM2.0H Setting DTC B1E21 Do Not Replace the TBM ECU. Is triggered when the TBM Backup Battery is discharged, inactive, or drained. This can happen during the lifetime of the vehicle. TBM should NOT be replace for B1E21, since there is no fault on TBM. TBM battery is replaceable. Part number of the back-up battery inside TBM is 68597650AA. Do not replace the following TBM Part Numbers: WL: 68639445A$, 68663479A$. ---------------------------------------------------------------------------------------------------------- TBM Setting DTC U0499-00 Please refer to SOL S268A000004 if you are attempting to replace or repair the telematics box due to DTC U0499-00. This DTC does not cause direct customer impact and cannot be cleared. Engineering is working on TBM software enhancements, tentative Q2 2026. Do not replace the following TBM Part Numbers: KM: 68592343A$
NHTSA source summary · Original PDF not reviewed by Recallfolio
Universal Garage Door Opener (UGDO) Inoperable Technicians may or may not find the following Diagnostic Trouble Code (DTC) present: SYMPTOM: ● B251D1-00 - Universal Garage Door Opener Control. Customers may comment on the following: ● Operational questions regarding the usage of the HomeLink® UGDO. . No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0111-00 - Intake Air Temperature Sensor 1 Circuit Range Performance Bank 1. (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance. (In Active or Stored status) ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low. (In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. (In Active or Stored status) ● P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or. (In Active or Stored status) ● P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1. (In Active or Stored status) ● P05BD-00 - Stop-Start Mode Switch Range/Performance. (In Active or Stored status) ● P0116-00 - Engine Coolant Temperature Sensor 1 Performance. (In Active or Stored status) ● P062B-00 - Internal Control Module Fuel Injector Control Performance. (In Active or Stored status) ● P0604-00 - Internal Control Module Random Access Memory Ram Error. (In Active or Stored status) ● P060C-00 - Internal Control Module Main Processor Performance. (In Active or Stored status)** ● P018B-00 - Fuel Pressure Sensor "B" Circuit Range/performance. **(In Active or Stored status)** ● P1CEA-00 - Boost Side EVAP Purge System Performance. **(In Active or Stored status)** ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off. **(In Active or Stored status)** ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. **(In Active or Stored status)** ● P0300-00 - Multiple Cylinder Misfire. **(In Active or Stored status)** Customers may also experience one or more of the following: ● **Oil Level High Warning in the Instrument Panel Cluster (IPC).** ● Fully Autonomous Parking Assist (FAPA) is not deactivated when accelerator pedal is pressed. ● Vehicle is not heating up fast enough at freezi
NHTSA source summary · Original PDF not reviewed by Recallfolio
Memory Seat Does Not Work There Is No Response from The Seat While Pressing the Memory Seat Profiles from the Switch Diagnostic Trouble Code (DTC) B1D9B-54- Seat Horizontal Front Stop Not Learned-Missing Calibration
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Global Telematics Box Module (TBM) Updates **Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● B22A9-96 - ECU Internal Performance-Component Internal Failure. ● B1560-11 - Cellular Antenna 1-Circuit Short To Ground. ● B1560-13 - Cellular Antenna 1-Circuit Open. ● B1561-11 - Cellular Antenna 2-Circuit Short To Ground. ● B1561-13 - Cellular Antenna 2-Circuit Open. ● B1562-14 - GPS Antenna-Circuit Short To Ground Or Open.** The customer may experience the following: ● Uconnect Box requires service message at start up on the display screen. This bulletin involves reprogramming the TBM with the latest available software.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Global Telematics Box Module (TBM) Updates **Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● B22A9-96 - ECU Internal Performance-Component Internal Failure. ● B1560-11 - Cellular Antenna 1-Circuit Short To Ground. ● B1560-13 - Cellular Antenna 1-Circuit Open. ● B1561-11 - Cellular Antenna 2-Circuit Short To Ground. ● B1561-13 - Cellular Antenna 2-Circuit Open. ● B1562-14 - GPS Antenna-Circuit Short To Ground Or Open.** The customer may experience the following: ● Uconnect Box requires service message at start up on the display screen. This bulletin involves reprogramming the TBM with the latest available software.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Prior to windshield replacement for cracks (circular shape towards center of glass), please mark the area of concern, tape windshield over crack area, replace and ship original part to Stellantis per the retention policy. Please make sure your 3rd party glass replacement follows this request.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Issue: complaint of rattle from exhaust Before replacement: Check for loose exhaust Aluminum isolator brackets (check if the bracket is movable by hand/bolts not fully fastened to the vehicle). If loose, tighten and check to see if the rattle is still present. Check clearances between exhaust components and Aluminum isolator brackets, as well as other parts of the vehicle. If physical metal-to-metal contact is identified, loosen the clamps joining the catalytic-side and muffler-side systems and slide the muffler side exhaust back until the 4 small M&M sized bulges can be seen on the driver-side cat-side pipes. Take care not to damage the system, do not use a hammer to break the muffler side free. The muffler side exhaust should be pushed towards the front of the vehicle until the rim of the muffler side inlet pipe meets the edge of the bulges. Re-tighten and check for rattles again. If the rattle is still present, replace the system.
NHTSA source summary · Original PDF not reviewed by Recallfolio
The vehicle will exhibit a service transmission/check engine warning indicator for the following transmission models: 845RE, 8HP45, 850RE, 8HP50, 8HP70, 8HP75, 8HP75-PHEV, 8HP75-LCV, 8HP90, 8HP95. Transmissions may exhibit the following diagnostic codes: P07E4, P1DB2, P0716, P1B14, P0733, P1D90, P1DB7, P1B13.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Active Diagnostic Trouble Code (DTC) B1A10-00, B1A11-00, B1A12- 00, B1A13-00-, B1A14-00, B1A15-00, B1A16-00, and B1A17-00 in The Radio Frequency Hub (RFH)
NHTSA source summary · Original PDF not reviewed by Recallfolio
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
NHTSA source summary · Original PDF not reviewed by Recallfolio
Windshield Wiper Blade Maintenance Customers may experience one or more of the following: SYMPTOM: ● Wiper blades that chatter/streak/jump/skip/smear or make noise while traveling across the windshield. . No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Service transmission/check engine warning indicator for the 850RE, 8HP50, 8HP70, 8HP75, 8HP75-PHEV transmissions that have fault codes P07E4, P1DB2, P0716, P1B14, P0733, P1D90, P1DB7, P1B13.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Rear Taillamp Condensation Clearing Procedure On occasion, vehicle exterior taillamp assemblies get fogged with a light layer of condensation on the SYMPTOM: inside of the lenses Fig. 1. This may be reported after the lamps have been turned on and brought up to operating temperature, turned off and then rapidly cooled by cold water (such as rain, or the water from a vehicle wash). Lens fogging can also occur under certain atmospheric conditions after a vehicle has been parked outside overnight (i.e. a warm humid day followed by clear cool night). This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor. Turning the taillamps on will usually accelerate this process. This bulletin is to communicate the procedure for rear taillamp condensation clearing.
Source components: ELECTRICAL SYSTEM · STRUCTURE:BODY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Universal Garage Door Opener Prior to replacing the UGDO or sun visor, call HomeLink® Customer Care at 1-800-355-3515 for a proper evaluation of the issue. If this does not correct the issue, please follow the steps in SOL: S2508000039
Source components: ELECTRICAL SYSTEM · STRUCTURE:BODY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS Related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
NHTSA source summary · Original PDF not reviewed by Recallfolio
Drivetrain Control Module (DTCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● C14A1-74 - Unintended Actuator Shaft Movement Detected-actuator Slipping. Customers may comment on the following: ● The service 4WD light is on in the Instrument Panel Cluster (IPC). This bulletin involves inspecting and possibly reprogramming the DTCM with the latest available software.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Body Control Module (BCM) Updates Customers may experience one or more of the following: ● Battery drained. ● Ignition off draw. ● Instrument Panel Cluster (IPC) goes off and on when the vehicle goes into sleep mode. ● Door lock indicator lamps stay illuminated. This bulletin involves inspecting and possibly updating the BCM with the latest available software. Z08 FSAR-TSB-6737 -2-
NHTSA source summary · Original PDF not reviewed by Recallfolio
Not applicable to vehicles built for US market. R1H Radio U40.20 USB Software Update - Korea Customers may experience one or more of the following: ● T-maps navigation feature is intermittently not available due to map loading. ● When the navigation speed alarm margin is set and the while driving the vehicle between the speed limit and the set margin, the navigation speed alarm will sound off continuously and the user is unable to control the volume. ● After setting a navigation destination and then the customer is following the navigation route, the navigation system will stop operating. ● Navigation touch screen menu is inoperable after setting a navigation destination. The home screen widget will be black and the navigation display map will no longer show the navigation route. ● WI-FI software update pop up is being triggered in non connected vehicles. ● Vehicle Forward Collision Warning must have two options: OFF / Warning + Active Braking. ● Temperature shows at upper left and right of center display highlights opposite side of what temperature hard switch is pressed. Affects Right Hand Drive RHD only. ● With ignition on and radio on, the radio display freezes then restarts (Rearview Camera (RVC) functions normally). ● Radio is taking more than one minute to start after starting the engine (RVC functions normally). ● System displays a blank screen in E-Hybrid tab when user switches into dark-theme mode (RVC functions normally). This bulletin involves inspecting and if required, updating the radio software level to U40.20. Depending on the radio's current software level the radio may need a one or two USB update. M08 FSAR-RSU-6722 -2-
NHTSA source summary · Original PDF not reviewed by Recallfolio
Note: actual release date was 12/22/2025 The customer is experiencing a clicking or pop noise from the steering knuckle and bearing area during turns while driving.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Part Number is more precise than "Up to and Including" and "After" dates in the item description. Please ensure to order the correct CADM and Long Range Camera Part Number(s) the vehicle was built with. The Root of the Original and Replacement part should be identical, the difference will be in the NIK level. Technician Removal of the Long Range Camera and CADM for Testing Purposes: Please ensure the root of the Original and Replacement part are identical.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Telematics Box Module (TBM) Backup Battery Replacement When DTC B1E21 Is Present Technicians may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● B1E21-96 - Backup Battery Component Internal Failure.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Body Control Module (BCM) Updates Customers may experience one or more of the following: ● Battery drained. ● Ignition off draw. ● Instrument Panel Cluster (IPC) goes off and on when the vehicle goes into sleep mode. ● Door lock indicator lamps stay illuminated. This bulletin involves inspecting and possibly updating the BCM with the latest available software
NHTSA source summary · Original PDF not reviewed by Recallfolio
BSR from the front suspension. Investigate the disconnecting stabilizer bar for a broken or cacked weld on the upper mount (anti rotation bracket). Instead of the replacing the whole stabilizer bar use Kit #PN#68730602AB. Refer to SOL #S22502000002 for additional information
NHTSA source summary · Original PDF not reviewed by Recallfolio
If the DTC B1E21-96: Backup Battery-Component Internal Failure is active and customer states Popup message will show at the radio: "Battery of Uconnect Box requires service. SOS call and related functions may be unavailable. Please visit an authorized dealer." PLEASE do not Replace the TBM module, only replace TBM Internal Battery (inside Telematics Box Module) and order PN68493347
NHTSA source summary · Original PDF not reviewed by Recallfolio
If the power liftgate exhibits operating noise during opening or closing but functions normally, follow these instructions: 1. Do NOT replace the Power liftgate if: -The liftgate opens and closes properly, and -The customer concern is only operating noise. 2. Replacement is ONLY recommended if: -There is an abnormal sound (e.g., grinding, scraping, knocking), -A functional issue exists (binding, stall, failure to open/close), -There is visible damage, or -Relevant DTCs are present. 3.If you hear grinding, scraping, or any abnormal sound, parts can be replaced. -Describe the issue clearly in the narrative. -If possible, record the sound and attach it to the narrative.
Source components: ELECTRICAL SYSTEM · STRUCTURE:BODY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Telematics Box Module (TBM) Backup Battery Replacement When DTC B1E21 Is Present echnicians may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● B1E21-96 - Backup Battery Component Internal Failure
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Body Control Module (BCM) Updates Customers may experience one or more of the following: ● Battery drained. ● Ignition off draw. ● Instrument Panel Cluster (IPC) goes off and on when the vehicle goes into sleep mode. ● Door lock indicator lamps stay illuminated. This bulletin involves **inspecting and possibly** updating the BCM with the latest available software.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Radio Frequency Hub Module (RFHM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● B1A10-00 - RKE FOB 1 Battery Low. ● B1A11-00 - RKE FOB 2 Battery Low. ● B23D7-14 - Gated Park Control - Circuit Short To Ground Or Open. Customers have experienced: ● **Intermittent key fob detection. ● Possible dead batteries in key fobs. ● Proximity Wake-Up (welcome feature) does not activate at times.** ● Uconnect app requests not functioning (none of the app functions work, lock/unlock, remote start). ● Vehicle won’t start unless the key fob is pressed to Keyless Ignition Node (KIN). ● Key fob not detected when inside vehicle. ● Passive Entry (PE) intermittently inoperative. ● KIN unresponsive This bulletin involves inspecting and possibly updating the RFHM module with the latest available software.
NHTSA source summary · Original PDF not reviewed by Recallfolio
1.Identify Customer Concern Check for small traces of coolant near the water pump, especially around the weeper chamber. Confirm if coolant is visibly dripping from the weeper chamber. 2.Root Cause identification The weeper chamber is designed to collect small amounts of coolant (< 3 ml/h) that pass through the dynamic seal. Red traces or shadows around the chamber may appear during initial operation due to seal adaptation or vapor condensation. These traces are not necessarily signs of a leak. Continuous dripping of coolant, however, indicates a malfunction. 3.Service Repair Procedure Lift the vehicle using an elevator. Verify if coolant is actively dripping from the weeper chamber. Run the engine at idle, alternating speed between 2000 4000 rpm for 15 minutes. Observe the weeper chamber during this test: If coolant continues to drip: Replace the water pump (possible permanent damage to the dynamic seal). If dripping stops: No further action is needed; the vehicle can be returned to the customer. 4.Clarify Leak Sources Do not confuse leaks from: The Press-In-Place rubber gasket (between water pump and engine block), or The inlet pipe nipples with leaks from the weeper chamber.
NHTSA source summary · Original PDF not reviewed by Recallfolio
WIRELESS CHARGING PAD OVERHEATING & INOP Do not replace wireless chargers before verifying these, 1. Does the customers Device have QI charging compatibility (supports Wireless charging)? (there are some phones not supporting wireless charging function) 2. Is the Device properly aligned for charging to initiate (also make sure that the Device does not slide/move easily while charging, causing the charging connection to break) 3. Check the backside of the phone if there is a metal plate/ring or accessory. It may block charging 4. Verify with the phone with no case if charging works well (case too thick, not QI certified case, case with accessories like a pop socket may cause not charging).
NHTSA source summary · Original PDF not reviewed by Recallfolio
The service shifter message comes on in the cluster and the lever gets stuck in park "P" and it can be present the follwoing DTC: - U11E3 - TCM Lost communication with ESM on D-PT CAN - U0103 - Lost communication with Electric Gear Shift Module - U0101- Lost communication with DTCM - U0418 - Implausible Data Received From Brake System Control Module - U0402 - Implausible data received from TCM **NOTE: Prior any shifter replacement Refer to TSB-21-016-25 2024-2025 WS - Valve Body Replacement. Recommended Diagnosis procedure: 1. Confirm if U0101 -Lost Communication with TCM or U0418 -Implausible Data Received From Brake System Control Module are present, if so check the Valve Body CAN Terminals any corrosion. 2. Check the wiring connectors between the ESM and the TCM and check voltage. 3. Check the pin header for the ESM for any bent pins. 4. If wiring and voltage are good and the DTCs (U11E3 - TCM Lost communication with ESM on D-PT CAN & U0103 - Lost communication with Electric Gear Shift Module) are still present, erase them with the scan tool. Reset ECU. 5. if DTCs for loss communication are still active at the ESM and you are still unable to shift then replace the Shifter module.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Security Gateway Module (SGW) Software Update *The following software enhancements are available: ● Update for Diagnostic Trouble Code (DTC) U3033-00 - Control Module Security Certificate Missing/Invalid. NOTE: This DTC will not turn on the Malfunction Indicator Light (MIL) but is active or stored and cannot clear. ● If a FOTA message appears specifically directing the customer to service OR repeated FOTA events are not being completed, then a manual flash is required for the SGW update. ● SGW is not responding to diagnostics and showing offline.* This bulletin involves flashing the SGW to the latest software level in the case that the FOTA did not function.
NHTSA source summary · Original PDF not reviewed by Recallfolio
R1H Radio U33.43 USB Software Update Customers may experience one or more of the following: ● Unable to select the Turn by Turn Navigation. ● Blank Performance Pages (Rearview Camera (RVC) Functions Normally). ● Android Auto® Voice Recognition (VR) inoperative. ● Media tuner delayed. ● Charge Schedule not accepting updates via phone (RVC Functions Normally). ● Ambient light inoperative. ● Map in Instrument Panel Cluster (IPC) inoperative. ● Media Widget blank. ● Navigation map black. ● Off-Road Pages inoperative (RVC Functions Normally). ● VR inoperative. ● Incorrect song title displayed (Carplay® only). ● Radio display switches from Media Page to Home Page (RVC Functions Normally). ● Ghost touch on Navigation screen (RVC Functions Normally). ● Widgets missing. ● New User Profile does not load. ● Returns to wrong page after View Camera Event selected by customer in the Camera View Pages (RVC Functions Normally) This bulletin involves inspecting and if required, updating the radio software level to U33.43. Depending on the radio's current software level the radio may need a one or two USB update