The manufacturer’s record · Page 17 of 26
Original record summaries, dates and identifiers for this model-year. Records 1,601–1,700 of 2,541, ordered newest first. Dated records on this page: Jul 28, 2015–Nov 9, 2015.
Back to 2015 Chevrolet SUBURBAN problems & recallsThis archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
NHTSA communication ID: 10115108
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician with tips on the Text Messaging feature that is available on some newer General Motors infotainment systems.
Source components: EQUIPMENT ADAPTIVE/MOBILITY · EQUIPMENT:ELECTRICAL.
Source record 10115108 at NHTSANHTSA communication ID: 10115107
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have a service engine soon malfunction indicator lamp, antilock braking system malfunction indicator lamp, service suspension system message, misfire, hesitation, no crank, heater-vent-air conditioning inoperative. Technician may find F11UA, F104UA, F35UA, and or F60UA blown. Technician should inspect the engine harness near the vacuum pump pulley to be chafing. Technician will need to reroute the wire harness and repair and damaged wires.
Source components: ELECTRICAL SYSTEM:WIRING.
Source record 10115107 at NHTSANHTSA communication ID: 10115105
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have any of these concerns remote keyless entry, passive Entry and Start Inoperative, No Fob detect message on driver information center, service tire pressure system, no audio, touch screen Inoperative, Steering Wheel Controls Inoperative, Service Stabilitrak, rear power windows inoperative, rear wiper inoperative, and or a dead battery. Technician may find Diagnostic Trouble Codes B3101, B144C, C0710, C0544, U1548, U1549, U154A, U0151, U0126, U0415, U0077, U0028 and/or U0029. Technician should inspect the left instrument panel for the wire harness being pinched. Technician will need to repair the wire harness and reroute the wire harness.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10115105 at NHTSANHTSA communication ID: 10137226
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin adds the 2016 model year to diagnostic tips and repair information to correct a customer concern of reduced acceleration at low speed and/or transmission slipping from a launch, DTC P0751 set.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10137226 at NHTSANHTSA communication ID: 10137225
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides radio programming information to correct customer concerns about no XM audio or time shift, radio lock-up, slow response, vertical line between clock and temperature, poor FM reception (Truck Only).
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10137225 at NHTSANHTSA communication ID: 10115102
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have a content theft alarm sounding for no apparent reason. Technician may use all published Service Information diagnostics and has not found the cause of the unwanted content theft alarm sounding. Technician should use Global Diagnostic System 2 to review the Body Control Module parameters for "Content Theft Deterrent Trigger History". This is a list of triggers that can cause a content theft alarm sounding. Driver door Passenger door, Left rear door, Right rear door, Rear closure, Tonneau Cover, Hood, Ignition Voltage, Intrusion, Inclination, Telematics enhanced service alarm, Battery reconnect detected, Unauthorized Pulse Width Modulated change, Security Indicates Tamper, and Glass Breakage. If the trigger is an Intrusion inspect for items hanging from the rear view mirror, solar powered dancing characters. When the trigger is a Glass breakage inspect the two rear quarter-panel windows and also in the liftgate glass. The quarter panel windows are attached to the body harness with a connector that looks similar to a 9 volt battery connector inspect them to be fully seated in on the glass. When the trigger is Ignition Voltage/Battery reconnect detected during a cold ambient temperature remote vehicle start event technician should call GM General Motors Technical Assistance Center for further assistance.
Source components: EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES.
Source record 10115102 at NHTSANHTSA communication ID: 10075716
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may comment that the vehicle has reduced acceleration at low speed and/or transmission is slipping from a launch. Technicians may find DTC P0751 set or stored in history. This condition may be caused by the Clutch Select Solenoid Valve 2 (359), located in the lower valve body, sticking in its bore resulting in a 4th gear start. Note: This condition can be very intermittent and difficult to duplicate.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10075716 at NHTSANHTSA communication ID: 10137219
NHTSA source summary · Original PDF not reviewed by Recallfolio
This engineering information bulletin announces the end of need for information from the field regarding A/C inoperative or poor performance on recent built vehicles.
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10137219 at NHTSANHTSA communication ID: 10115094
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have a squeak, clunk, or knock type noise from the front suspension when hitting bumps. Technician should use published Service Information diagnostics. If the source of the noise has been pinpointed to either the left or right front strut, and if the strut has not been previously disassembled technician will need to contact the General Motors Technical Assistance Center for more information.
Source components: SUSPENSION.
Source record 10115094 at NHTSANHTSA communication ID: 10190533
NHTSA source summary · Original PDF not reviewed by Recallfolio
Grease or sealant visible on steering gear - should not be interpreted as leak. Some customers or technicians may comment on seeing grease or sealant on certain locations of the steering gear. The illustrations below include arrows showing the areas on the steering gear that the supplier intentionally applies sealing grease. Any of these locations have the potential of showing visible grease under normal operation.
Source components: STEERING:GEAR BOX (OTHER THAN RACK AND PINION).
Source record 10190533 at NHTSANHTSA communication ID: 10072092
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ENGINE.
Source record 10072092 at NHTSANHTSA communication ID: 10126401
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on the PQC assembly replacement process - for dealers required to contact PQC prior to replacing an assembly (U.S. and Canada only).
Source components: STRUCTURE.
Source record 10126401 at NHTSANHTSA communication ID: 10114937
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician when Service Information diagnostics indicates a fuel injector may need to be removed for a repair or replaced the injector will need a new seal. This Preliminary Information contains all the O-ring seal and the injector kit part numbers.
Source components: FUEL SYSTEM, OTHER:FUEL INJECTION SYSTEM.
Source record 10114937 at NHTSANHTSA communication ID: 10114934
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about being to achieve pre-load when setting up the pinion bearing pre-loads during reassembly of the 9.5/9.76 inch rear axles. Technician will need to use pinion gear install washer part number 11609638 onto the pinion shaft between the flange and nut. Tighten the pinion nut until you achieve 10 pound inch or 1.0 newton rotating torque. After the torque has been achieved back the nut off and remove the washer. Tighten the nut back down until you achieve 15 pound inch or 1.7 newton meters for used bearings or 20 pound inch 2.25 newton meters for new bearings.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10114934 at NHTSANHTSA communication ID: 10075412
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: EQUIPMENT.
Source record 10075412 at NHTSANHTSA communication ID: 10114932
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that when shutting the vehicle off when the radio is turned off prior, the radio will turn back on in the muted condition on the next key cycle. No action should be taken at this time as this is considered a normal operating characteristic.
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10114932 at NHTSANHTSA communication ID: 10126395
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
Source components: ENGINE AND ENGINE COOLING.
Source record 10126395 at NHTSANHTSA communication ID: 10135182
NHTSA source summary · Original PDF not reviewed by Recallfolio
15038 - Dealer Message Only - Not a Field Action. Select 2015 model year vehicles will receive a software download via OnStar® to update the software for the Electronic Climate Control (ECC) system. This over-the-air update is being piloted on a few hundred customer vehicles in the mid-October thru mid-December timeframe. Pending the successful completion of the pilot, rollout to the general vehicle population will begin in January 2016.
Source components: ELECTRICAL SYSTEM.
Source record 10135182 at NHTSANHTSA communication ID: 10126417
NHTSA source summary · Original PDF not reviewed by Recallfolio
15038 - Dealer Message Only - Not a Field Action. Select 2015 model year vehicles will receive a software download via OnStar® to update the software for the Electronic Climate Control (ECC) system. This over-the-air update is being piloted on a few hundred customer vehicles in the mid-October thru mid-December timeframe. Pending the successful completion of the pilot, rollout to the general vehicle population will begin in January 2016.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10126417 at NHTSANHTSA communication ID: 10126393
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provides policy information on an updated warranty and policy exchange program for electronic products through GM authorized Electronic Service Centers (ESCs) (U.S. and Canada).
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10126393 at NHTSANHTSA communication ID: 10114926
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have extended or long crank time during cold ambient air temperatures. Direct Injection systems run at higher pressures, and the mechanical pump on the engine must build up the required pressure before the first injection event occurs. Direct Injection engines may have slightly longer cold crank times than that of port fuel engines.
Source components: ENGINE · EQUIPMENT:MECHANICAL · FUEL SYSTEM, OTHER:FUEL INJECTION SYSTEM.
Source record 10114926 at NHTSANHTSA communication ID: 10126390
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin adds the 2016 model year and provides technicians with repair information to correct a customer concern of rough, uneven or irregular horizontal seam on liftgate.
Source components: STRUCTURE:BODY:HATCHBACK/LIFTGATE.
Source record 10126390 at NHTSANHTSA communication ID: 10126386
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin adds the 2016 model year to repair information to correct a customer concern of the hood fluttering, vibrating or displaying visible motion at highway speeds or over rough road surfaces.
Source components: STRUCTURE:BODY:HOOD.
Source record 10126386 at NHTSANHTSA communication ID: 10126385
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin adds the 2014 - 2016 model years to cleaning information to correct a customer concern of seeing a white film/residue on the IP pad and/or door trim panels.
Source components: ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT:ELECTRICAL.
Source record 10126385 at NHTSANHTSA communication ID: 10126384
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin adds the 2015 Chevrolet Colorado and GMC Canyon to diagnosis and repair information to correct a customer concern of alleged no park, vehicle rolls in park or park will not hold.
Source components: PARKING BRAKE.
Source record 10126384 at NHTSANHTSA communication ID: 10114912
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician for vehicles that exhibit a driver?s power memory seat and power adjustable pedals inoperative. Look for poor terminal tension at the left instrument panel fuse block connector X1 terminals 27 and 28. If poor retention is found in these terminals replace them with terminated lead part number 19301761.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:MECHANICAL · SEATS:FRONT ASSEMBLY:POWER ADJUST.
Source record 10114912 at NHTSANHTSA communication ID: 10114903
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have an issue when using Bluetooth voice recognition with an iPhone. Technician should work with the customer to insure the phone contacts to not have any Emojis loaded to any contact.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10114903 at NHTSANHTSA communication ID: 10114900
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles with tire sidewall irregularities. This is a visual condition that will not affect durability, reliability or performance of the tires. Dealer should communicate to the customer that slight sidewall indentations are a common characteristic of radial tire construction.
Source components: TIRES:SIDEWALL.
Source record 10114900 at NHTSANHTSA communication ID: 10126375
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information to dealership personnel on the use of non-GM approved battery chargers and booster packs.
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10126375 at NHTSANHTSA communication ID: 10114895
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have a pop, click, tick, snap, or itch type noise in the steering column when turning left or right during low speeds or parking maneuvers. Technician will need to replace the column upper bearing inner race, spring, and seat.
Source components: STEERING.
Source record 10114895 at NHTSANHTSA communication ID: 10114894
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vibration complaints that are one of the most challenging complaints to accurately diagnose and repair. Technician will need to use Pico Oscilloscope Diagnostic Kit to effectively diagnosis vehicles. Technician should drive the vehicle will using the Pico Oscilloscope to record data. After the data is recorded it should be reviewed to determine the root cause of the concern. If a repair attempt made the concern better but not eliminated or had no affect at all, and are requesting assistance from General Motors Technical Assistance Center record another Pico file and save it to the computer. After the new Pico Oscilloscope data has been saved email the data to General Motors Technical Assistance Center in the subject line include ?Vibration? ?Business Associate Code? and the last 8 of the Vehicle Identification Number.
Source components: STRUCTURE:FRAME AND MEMBERS · SUSPENSION.
Source record 10114894 at NHTSANHTSA communication ID: 10126371
NHTSA source summary · Original PDF not reviewed by Recallfolio
This engineering information bulletin announces the end of need for information from the field regarding a customer concern that one or more key transmitter(s) inoperative/not detected or passive entry inoperative while transmitter functions operate as intended.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10126371 at NHTSANHTSA communication ID: 10126370
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information to dealership personnel on proper engine and automatic transmission/transaxle identification.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · POWER TRAIN.
Source record 10126370 at NHTSANHTSA communication ID: 10126369
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information that may be useful in diagnosing/testing batteries that have set for a long period of time and/or set in cold weather climates to correct a customer concern of symptoms that include, but not limited to, a slow or no crank condition that may be caused by a discharged battery.
Source components: ELECTRICAL SYSTEM.
Source record 10126369 at NHTSANHTSA communication ID: 10114893
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician that the part restriction on the 8L45/8L90 8 speed and the LCT1000 6 Speed Allison automatic transmission has ended.
Source components: POWER TRAIN.
Source record 10114893 at NHTSANHTSA communication ID: 10114892
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that have a click, rattle or a squeak nose coming from the dash. Technician will use Service Information to locate the Accessory AC and DC Power Control Module located to the right of the steering column. Remove the power inverter module and apply two sided tape to the module bracket to insulate it from the mount. The instrument panel accessory bezel will also need to be removed. Apply flocking tape to the instrument panel accessory bezel retainers. Also the instrument panel extension will need to be removed. Apply foam tape around connectors located under grill to prevent them from rattling on grill. Apply flocking tape to the instrument panel extension retainers and apply a strip of foam tape along the edge of the grill to isolate the grill from the dash.
Source components: ELECTRICAL SYSTEM.
Source record 10114892 at NHTSANHTSA communication ID: 10114889
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles with a crankshaft balancer appears to be out of balance or wobbling while watching it with the engine running. Technician will need to check crankshaft balancer run out. If the balancer run out is greater than 0.25mm the crankshaft balancer will need to be replaced.
Source components: ENGINE · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10114889 at NHTSANHTSA communication ID: 10114887
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on. Technician will find Diagnostic Trouble Codes P0340 and P0341 setting at times. Technician should use normal published Service Information diagnostics. If normal Service Information diagnostics does not isolate the concern, inspect for corrosion in connector X154 located on the front cover next to the vacuum pump.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10114887 at NHTSANHTSA communication ID: 10114884
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that are equipped with Hands Free Power Lift-gate Regular Production Option Code (TC2). Some customers may experience problems with the activation of the lift-gate hands free operation. Dealer will communicate to the customer some tips on the Hands free Lift-gate. The remote keyless entry FOB must be within 3 feet or 1 meter from the bumper. The foot kick is conducted at the direct center of the length of kick zone.
Source components: STRUCTURE:BODY:HATCHBACK/LIFTGATE.
Source record 10114884 at NHTSANHTSA communication ID: 10114883
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that are equipped with 6L80 Regular Production Option Code (MYC), 6L90 Regular Production Option Code (MYD) or 8L90 Regular Production Option Code (M5U) Automatic Transmission. Starting with the 2013 model year, Full Size Trucks and Utilities now have Powertrain Grade Braking. Powertrain grade braking assists when driving on a downhill grade to help maintain desired vehicle speed by using the engine and transmission to slow the vehicle.
Source components: ENGINE · POWER TRAIN · SERVICE BRAKES, HYDRAULIC:POWER ASSIST.
Source record 10114883 at NHTSANHTSA communication ID: 10114875
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have an inoperative radio. Technician may find Diagnostic Trouble Code U0184 stored in multiple modules. If the concern is present at the dealership technician will need to contact General Motors Technical Assistance Center for further assistance if within 4 hours from Warren, Michigan. Technician should remove power from the radio. If the radio starts working with a power cycle advise the customer that we apologize for this inconvenience and that General Motors is working on a permanent solution for this concern. After the power cycle and the radio is still inoperative record the radio power and ground readings and the voltage on the low speed data line.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10114875 at NHTSANHTSA communication ID: 10114874
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that the lift-gate actuator or strut that is going to be removed or replaced. If the actuator or strut comes loose off a ball stud after it has been reinstalled. Technician will need to replace the ball stud or ball stud w/bracket, the actuator or strut, and ensure the ball socket clips are properly orientated and seated to prevent it from reoccurring.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · STRUCTURE:BODY:HATCHBACK/LIFTGATE · STRUCTURE:BODY:HATCHBACK/LIFTGATE:SUPPORT DEVICE/STRUT.
Source record 10114874 at NHTSANHTSA communication ID: 10126355
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provides policy information on Causal Part requirements for transactions submitted to GM for payment.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10126355 at NHTSANHTSA communication ID: 10126350
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provides policy information on an updated warranty and policy exchange program for electronic products through GM authorized Electronic Service Centers (ESCs) (U.S. and Canada).
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10126350 at NHTSANHTSA communication ID: 10126349
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provides retail, wholesale and fleet personnel with General Motors recommendations for customer concerns related to wheel alignment.
Source components: WHEELS.
Source record 10126349 at NHTSANHTSA communication ID: 10126347
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides repair information to correct a customer concern of a Service Stabilitrak message displayed on the Driver Information Center (DIC). During diagnosis, a technician may find DTC C0196-5A set in the Electronic Brake Control Module (EBCM).
Source components: SERVICE BRAKES.
Source record 10126347 at NHTSANHTSA communication ID: 10075408
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ELECTRICAL SYSTEM.
Source record 10075408 at NHTSANHTSA communication ID: 10127246
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about a connectivity concern with Bluetooth after phone software is updated or after any vehicle updates for the radio or Human Machine Interface has taken place. Technician should delete all Bluetooth pairings and then reboot the Bluetooth device and the vehicle. After the vehicle and radio is booted back up repair the Bluetooth device.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10127246 at NHTSANHTSA communication ID: 10127243
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician with tips on the Text Messaging feature that is available on some newer General Motors infotainment systems.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10127243 at NHTSANHTSA communication ID: 10127241
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that are unable to access XM Weather. If the system responds by highlighting the XM Weather Icon but it does not enter the application technician should replace the Human Machine Interface module for this concern.
Source components: ELECTRICAL SYSTEM.
Source record 10127241 at NHTSANHTSA communication ID: 10127240
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that the Turn By Turn directions may no longer be displayed after the Canada OnStar upgrade. Dealer should communicate to the customer that we apologize for this inconvenience and that General Motors is working on a solution for this concern.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10127240 at NHTSANHTSA communication ID: 10127238
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that the incoming caller ID may no longer be available or displayed after the Canada OnStar upgrade. Dealer should communicate to the customer that we apologize for this inconvenience and that General Motors is working on a solution for this concern.
Source components: ELECTRICAL SYSTEM.
Source record 10127238 at NHTSANHTSA communication ID: 10127234
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a coolant loss and/or coolant odor after driving the vehicle. Technician will need to test the cooling system looking for leaks at the outer head bolts. If coolant is found replace the head the concern is present on.
Source components: ENGINE AND ENGINE COOLING.
Source record 10127234 at NHTSANHTSA communication ID: 10127231
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician on the steps to help diagnose and repair vehicles with a rattle, squeak, clunk, thump, or bump. If published Service Information diagnostics do not lead to a repair for the concern. Technician should inspect the opposite side shock/strut for the cause of the concern.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10127231 at NHTSANHTSA communication ID: 10127230
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician to help determine if the vehicle is equipped with factory or aftermarket Compressed Natural Gas, Liquefied Petroleum Gas, or Bi-Fuel Systems. Technician will check for the Vehicle Emission Control Information Label. By using the engine Regular Production Option Code as well as the Vehicle Emission Control Information Label, technician can confirm the vehicle has a factory installed alternative fuel system or who the manufacturer is of the aftermarket fuel system.
Source components: FUEL SYSTEM, GASOLINE.
Source record 10127230 at NHTSANHTSA communication ID: 10127227
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have various Heater-Vent-Air Conditioning issues. Technician should use Tis2Web to reprogram the Heater-Vent-Air Conditioning control module.
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10127227 at NHTSANHTSA communication ID: 10127225
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have intermittent and hard to duplicate Rear Camera blank, distorted, or fuzzy. Also no radio, OnStar, or speech audio and the volume is unable to be adjusted from the integrated center stack or the steering wheel controls. The driver information center will show ?No Audio? in Audio mode. Technician will need to inspect X275 and X225 for bent terminals, terminals backing out of the connector, or terminals contacting another terminal behind each side of the connector and repair as necessary.
Source components: BACK OVER PREVENTION: CAMERA SYSTEM · ELECTRICAL SYSTEM:SOFTWARE.
Source record 10127225 at NHTSANHTSA communication ID: 10127203
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician with a tip when the vehicle stops running after it has been idling for 2.5 hours. This is normal operation of the vehicle built with regular production code BTM and without Regular Production Option Code AVF. If the vehicle was built with regular production code BTM and AVF only has a 1 hour idle time.
Source components: ENGINE.
Source record 10127203 at NHTSANHTSA communication ID: 10127202
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have a Service 4WD message on the Driver Information Center when operated below 10 degrees Fahrenheit (-12 Celsius). Technician may find C0398 or C0326 stored in the Transfer Case Control Module. For vehicles with Regular Production Option Code NPO, NQH and NQ6 and only setting Diagnostic Trouble Codes C0398 or C0398 and C0326 reprogram the transfer case control module with the latest calibration from TIS2WEB and perform the setup procedure.
Source components: ELECTRICAL SYSTEM.
Source record 10127202 at NHTSANHTSA communication ID: 10127199
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician of a complaint of a sag or hesitation when accelerating. The concern is present when coasting at low speeds of less than 15 miles per hour and then aggressively applying the throttle, or after making a hard stop followed by an aggressive throttle. This is considered normal operation of the vehicle the throttle is delayed and opened slowly up to .7 seconds to help minimize driveline lash and clunking or will have approximately .5 seconds of zero torque to allow the transmission to shift to first gear.
Source components: ELECTRICAL SYSTEM:STARTER ASSEMBLY.
Source record 10127199 at NHTSANHTSA communication ID: 10123492
NHTSA source summary · Original PDF not reviewed by Recallfolio
15304 - Service Update. This bulletin provides a service procedure to reprogram the transfer case control module on the vehicles listed above. In low ambient temperatures, below 5°F (-15°C) a transfer case brake motor assembly malfunction may occur. Diagnostic Trouble Code (C0398 - Range Position Correlation Fault) will be set, locking the transfer case in ?4HI? until the vehicle is serviced. This software update also addresses other transfer case control issues for overall improved drivability.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10123492 at NHTSANHTSA communication ID: 10127192
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles with a water leak and/or hiss type wind noise from the sunroof or headliner area. Technician should replace the sunroof seal to repair the concern.
Source components: VISIBILITY:SUN/MOON ROOF ASSEMBLY.
Source record 10127192 at NHTSANHTSA communication ID: 10127186
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicle with Service ABS and/or Traction control lights/message on, Service Power Steering System, Service Suspension System, and or Loss of communication with EBCM, SWPS, PSCM, and/or SCM. Technician may find Diagnostic Trouble Codes U0077, U0121, U0126, U0131, U0139, U0401, U0415, and/or U0428. Technician should remove the driver and passenger sill plate to gain access to the wire harness. If any open, damaged, or corroded wires should be repaired.
Source components: ELECTRICAL SYSTEM.
Source record 10127186 at NHTSANHTSA communication ID: 10248494
NHTSA source summary · Original PDF not reviewed by Recallfolio
Navigation Voice Prompts Choppy Distorted or Garbled.
Source components: EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).
Source record 10248494 at NHTSANHTSA communication ID: 10127175
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles with misfires or roughness on cold start up. Technician may find a Diagnostic Trouble Code P0300 stored. Technician will add coolant dye to the system, run engine through warm up, pressurize the cooling system on a cold soak engine and inspect the suspect cylinder with a bore scope for coolant dye evidence. If coolant is found in the cylinder do not replace the cylinder head because that will not repair this concern. Dealer will need to contact General Motors Product Quality Center for engine replacement.
Source components: ENGINE AND ENGINE COOLING.
Source record 10127175 at NHTSANHTSA communication ID: 10075423
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: SUSPENSION.
Source record 10075423 at NHTSANHTSA communication ID: 10113817
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides frame coating repair information to correct a customer concern of wax coating on frame peeling, metal shows corrosion/rusting (U.S. and Canada Only).
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10113817 at NHTSANHTSA communication ID: 10059097
NHTSA source summary · Original PDF not reviewed by Recallfolio
GENERAL MOTORS: PARTS FOR MOST VEHICLES, CLUTCH, MASTER CYLINDER ASSEMBLY ARE, REQUIRED AND REQUESTED, TO BE RETURNED AND NEED TO REORDER REPLACEMENT PARTS USING SAME PART NUMBERS. *PE
Source components: POWER TRAIN:CLUTCH ASSEMBLY · SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER.
Source record 10059097 at NHTSANHTSA communication ID: 10114672
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about the Media Oriented Systems Transport Bus Diagnostic Tool Kit (EL-51578) has been released to help diagnose any of the Media Oriented Systems Transport bus concerns. The kit contains header connectors that are installed to bypass Media Oriented Systems Transport bus modules. The bypass connector also contains a terminal for verifying Media Oriented Systems Transport control circuit voltages. Technician should review Media Oriented Systems Transport bus description and operation and Diagnostic Trouble Code U0028 diagnostic procedures.
Source components: EQUIPMENT:ELECTRICAL · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10114672 at NHTSANHTSA communication ID: 10113810
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provides dealership personnel with policy and procedure requirements for essential tools that include consumable parts (U.S. Only).
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10113810 at NHTSANHTSA communication ID: 10114661
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician with a tip when the vehicle stops running after it has been idling for 2.5 hours. This is normal operation of the vehicle built with regular production code BTM.
Source components: ENGINE.
Source record 10114661 at NHTSANHTSA communication ID: 10114658
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician vehicles that have a wind noise from a side door, tick or rattle noise from a side door, B and/or C pillar area, or door applique trim has come loose. Technician should replace the door applique trim.
Source components: STRUCTURE:BODY:DOOR.
Source record 10114658 at NHTSANHTSA communication ID: 10114656
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician before replacing the crankshaft to review the following. Dealer should complete the Service Information diagnostics and the Cost Comparison Worksheet for Assembly Repair vs. Replacement. Technician will use the latest version of 09-06-04-026G to verify the Engine Control Module calibration is not an aftermarket calibration. If the customer prefers to keep the original numbers matching engine please call General Motors Technical Assistance Center for repair direction.
Source components: ENGINE · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10114656 at NHTSANHTSA communication ID: 10089829
NHTSA source summary · Original PDF not reviewed by Recallfolio
15155 - CUSTOMER SATISFACTION PROGRAM. CERTAIN 2015 MODEL YEAR CADILLAC ESCALADE, CADILLAC ESCALADE ESV, CHEVROLET SILVERADO CREW CAB, CHEVROLET SUBURBAN, CHEVROLET TAHOE, GMC SIERRA CREW CAB, GMC YUKON, AND GMC YUKON XL VEHICLES MAY HAVE A CONDITION THAT CAN ALLOW WATER TO LEAK INTO THE VEHICLES ROOF-MOUNTED ANTENNA. THIS CONDITION COULD PREVENT THE VEHICLES ONSTAR SYSTEM FROM ACCURATELY DETERMINING THE VEHICLES LOCATION; DISABLE THE VEHICLES COMPASS, NAVIGATION, AND XM RADIO SYSTEMS; ILLUMINATE THE VEHICLES RED ONSTAR LED INDICATOR; AND ALLOW WATER INTO THE INTERIOR PASSENGER COMPARTMENT. DEALERS ARE TO REPLACE THE ONSTAR® ANTENNA.
Source components: EQUIPMENT · EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).
Source record 10089829 at NHTSANHTSA communication ID: 10114650
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician that the Human Machine Interface, Radio or Tuner, radio controls, Integrated Center Stack, display, and Media Disc Players are placed on restriction through the General Motors Technical Assistance Center. Dealer will need to contact General Motors Technical Assistance Center for further assistance.
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10114650 at NHTSANHTSA communication ID: 10113796
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on the proper use of GM floor mats.
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10113796 at NHTSANHTSA communication ID: 10114647
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have extended or long crank time during cold ambient air temperatures. Direct Injection systems run at higher pressures, and the mechanical pump on the engine must build up the required pressure before the first injection event occurs. Direct Injection engines may have slightly longer cold crank times than that of port fuel engines.
Source components: ENGINE · FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM.
Source record 10114647 at NHTSANHTSA communication ID: 10114645
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Codes P0089, P127C, P127D, P0192, P0193, P228C, P228D, and P006C. Technician should follow published Service Information diagnostics for the Diagnostic Trouble Codes that are stored. If Service Information does not lead to a repair for the concern, the fuel rail pressure sensor should be replaced.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:FUEL RAIL.
Source record 10114645 at NHTSANHTSA communication ID: 10114643
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have low oil pressure after an oil change. Technician will inspect the oil filter part number PF63E. Part number PF48 oil filter will fit but will cause a low oil pressure concern.
Source components: ENGINE.
Source record 10114643 at NHTSANHTSA communication ID: 10113792
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information to technicians regarding intake manifold inspection/replacement after severe internal engine damage.
Source components: ENGINE AND ENGINE COOLING.
Source record 10113792 at NHTSANHTSA communication ID: 10114642
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D stored in Telematics Communication Interface Control Module. Technician will check Global Warranty Management system for customer satisfaction program 15086 status. If the status of the customer satisfaction program 15086 was not completed follow the steps to get the Telematics Communication Interface Control Module replaced. If the status of customer satisfaction program 15086 is found completed contact General Motors Technical Assistance Center OnStar group for further assistance.
Source components: ELECTRICAL SYSTEM.
Source record 10114642 at NHTSANHTSA communication ID: 10113788
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provides policy information on courtesy transportation and roadside assistance programs.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10113788 at NHTSANHTSA communication ID: 10113787
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information to advise dealers about seat belt buckles not operating and/or seat belt warning light illumination, as well as difficulty latching and unlatching the buckle or the buckle release button sticking.
Source components: SEAT BELTS · SEAT BELTS:FRONT:BUCKLE ASSEMBLY.
Source record 10113787 at NHTSANHTSA communication ID: 10059095
NHTSA source summary · Original PDF not reviewed by Recallfolio
GENERAL MOTORS: IN SOME VEHICLES AND TRUCKS, WHEN TRANSFERRING INTAKE MANIFOLD TO REPLACE AN ENGINE LONG SERVICE BLOCK, DUE TO INTERNAL DAMAGE, EXTREME CAUTION MUST BE TAKEN FOR COMPONENT DEBRIS VIA BROKEN, BENT OR MISSING INTAKE VALVES. *PE
Source components: ENGINE · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE.
Source record 10059095 at NHTSANHTSA communication ID: 10059069
NHTSA source summary · Original PDF not reviewed by Recallfolio
CADILLAC/GMC/CHEVROLET: ON SOME SUVS, WHEN SHIFTER IN PARK POSITION AND HAVE BEEN IDLING FOR 2 HOURS OR MORE, THE ENGINE WOULD STOP RUNNING. MODEL 2015 ESCALADE (ALL), TAHOE, SUBURBAN, YUKON (ALL). *PE
Source components: ENGINE.
Source record 10059069 at NHTSANHTSA communication ID: 10059068
NHTSA source summary · Original PDF not reviewed by Recallfolio
CHEVROLET/GMC: ON TRUCKS/SUVS AFTER HAVING AN OIL AND FILTER CHANGE, THE PRESSURE FOR OIL IS LOW AND SES LIGHT HAD DIAGNOSTIC TROUBLE CODE (DTC) P0521 APPEAR. MODEL 2014-15 SILVERADO, SUBURBAN, TAHOE, SIERRA, YUKON, YUKON XL. *PE
Source components: ENGINE.
Source record 10059068 at NHTSANHTSA communication ID: 10059065
NHTSA source summary · Original PDF not reviewed by Recallfolio
GMC/CHEVROLET/CADILLAC: INFORMATION PROVIDED ON SOME VEHICLES AND SUV, FOR REPLACEMENT OF CRANKSHAFT, FOR ENGINE REPAIR AND OIL TANK AND LINES WOULD BE REPLACED ON DRY SUMP ENGINES WHEN REPAIRING AND/OR REPLACING. MODEL 2014-16 CORVETTE, SILVERADO, SIERRA, 2016 CTS-V, 2015-16 ESCALADE, SUBURBAN, TAHOE, YUKON, YUKON XL. *PE
Source components: ENGINE.
Source record 10059065 at NHTSANHTSA communication ID: 10059036
NHTSA source summary · Original PDF not reviewed by Recallfolio
CADILLAC/CHEVROLET/GMC: SOME VEHICLES EXPERIENCING FUEL RAIL PRESSURE SENSOR CODES WITH SES LAMP. MODEL 2015 ESCALADE, 2014-15 SILVERADO 1500, SUBURBAN, TAHOE, SIERRA 1500, YUKON, YUKON XL. *PE UPDATED 2/1/16. *PE
Source components: FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:FUEL RAIL.
Source record 10059036 at NHTSANHTSA communication ID: 10058785
NHTSA source summary · Original PDF not reviewed by Recallfolio
CHEVROLET/GMC/CADILLAC: TSB HAS AN OWNER'S NOTIFICATION LETTER. SELECT DOCUMENT SEARCH BUTTON BELOW. WATER IS LEAKING ON TO ROOF MOUNTED ANTENNA AND IS PREVENTING ONSTAR SYSTEM TO DETERMINE LOCATION OF VEHICLE BY DISABLING COMPASS, XM RADIO SYSTEM, NAVIGATION. MODEL 2015 ESCALADE, ESCALADE ESV, SILVERADO CREW CAB, SUBURBAN, TAHOE, SIERRA CREW CAB, YUKON, YUKON XL. *PE
Source components: EQUIPMENT · EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).
Source record 10058785 at NHTSANHTSA communication ID: 10114640
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have a grind, pop, shudder or bind feeling/noise in the steering column when turning left or right. Technician will inspect for the lower column bearing to be out of position and the upper intermediate steering shaft to lower column shaft bolt and nut may be contacting the inhibitor/shiftier cable bracket. Technician will remove the steering column from the vehicle and replace the lower bearing adapter assembly.
Source components: STEERING.
Source record 10114640 at NHTSANHTSA communication ID: 10138154
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information to dealership personnel on properly maintaining vehicles in dealer inventory.
Source components: ELECTRICAL SYSTEM · ENGINE · EQUIPMENT.
Source record 10138154 at NHTSANHTSA communication ID: 10114639
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D stored in Telematics Communication Interface Control Module. Technician will use Global Diagnostic System 2 to review the Firmware Over-the-Air version. If the Firmware Over-the-Air version on the scan tool equals 6708 the technician will need to contact General Motors Technical Assistance Center for further assistance. If the Firmware Over-the-Air version on the scan tool is lower than 6708 Dealer can order the part thought the Instrument Sales and Service website process.
Source components: ELECTRICAL SYSTEM.
Source record 10114639 at NHTSANHTSA communication ID: 10114638
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about customers that may complain of various concerns when using Bluetooth components. Technician should use the Preliminary Information to gather information from the customer on their Bluetooth device and the concern they are having before calling General Motors Technical Assistance Center.
Source components: ELECTRICAL SYSTEM.
Source record 10114638 at NHTSANHTSA communication ID: 10114637
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician on a concern of body pressure booming. This concern may be more noticeable when the active fuel management is engages and the engine is in 4 cylinder mode. The roof sheet metal may not be attached to the roof bows any longer. If equipped with a sunroof it may leak or be misaligned with the roof. Technician is to follow the steps to apply vibration control material between the roof bow and the roof sheet metal. Any roof bow that is no longer bonded to the sheet metal must be repaired. Remove the old material with an appropriate tool. Once the old material is removed install the appropriate thickness foam shim to fill the gap between the roof sheet metal and the roof bow. The foam should be placed in 5 inch lengths and placed in 5 locations along the bow using vibration control material to fill the distance between the foam shim. If the space between the bow is 6 millimeters or less just use the vibration control material.
Source components: STRUCTURE · STRUCTURE:BODY · STRUCTURE:BODY:ROOF AND PILLARS · VISIBILITY:SUN/MOON ROOF ASSEMBLY.
Source record 10114637 at NHTSANHTSA communication ID: 10114635
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that stop running after it has been idling for 2.5 hours. This is normal operation of the vehicle built with regular production code BTM.
Source components: ENGINE.
Source record 10114635 at NHTSANHTSA communication ID: 10114634
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician on the steps needed to diagnose and repair vehicles that may have a rattle noise from the dash. Technician will need to inspect for the rear heater pipes contacting the passenger side exhaust manifold. If the rear heater pipe is found to be contacting the exhaust manifold, reposition the heater pipe so it no longer makes contact.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE.
Source record 10114634 at NHTSANHTSA communication ID: 10114632
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have One or more tire pressures display dashes, Service Tire Monitor System Message, Remote Keyless Entry poor range or inoperative or ?No Fob Detected? message or Passive entry system inoperative (if equipped). The technician may find any of the following Diagnostic Trouble Codes set in the Body Control Module associated with the vehicle tire pressure sensors: C0750, C0755, C0760, and/or C0765. Technician will inspect the Remote Control Door Lock Receiver antenna system. Before replacing any parts check three locations for the system being unplugged. The locations were the system could be unplugged are Antenna Amplifier Module disconnected from Antenna at right rear quarter glass, Coax cable disconnected at the Antenna Amplifier Module, and Coax cable disconnected at the Remote Control Door Lock Receiver.
Source components: ELECTRICAL SYSTEM · TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS.
Source record 10114632 at NHTSANHTSA communication ID: 10114631
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician of addition information when diagnosing a service driver assist message with a diagnostic trouble code B172E and or a B172F. The haptic seat motor has a pigtail lead coming off of it. In many cases the wiring pigtail near the haptic seat motor has broken and will require replacement.
Source components: ELECTRICAL SYSTEM · SEATS:FRONT ASSEMBLY:POWER ADJUST.
Source record 10114631 at NHTSANHTSA communication ID: 10114630
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician that the LCT1000 6 Speed Allison, 8L90 and 8L45 8 speed automatic transmission as well as the transmission control module is on restriction through General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
Source components: POWER TRAIN.
Source record 10114630 at NHTSANHTSA communication ID: 10138146
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin supplies infomation for identifying non-GM (Aftermarket) engine calibrations for gasoline engines using Tech 2® or GDS 2 (U.S. and Canada).
Source components: ENGINE AND ENGINE COOLING:ENGINE:GASOLINE.
Source record 10138146 at NHTSA