Original record summaries, dates and identifiers for this model-year. Records 2,001–2,100 of 2,405, ordered newest first. Dated records on this page: Oct 1, 2014–Nov 25, 2014.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Nov 25, 2014Service Bulletin/Repair Instructions
PIC6049A
NHTSA communication ID: 10114752
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about the wireless charging module has been placed on restriction through the General Motors Technical Assistance Center. Dealer will need to call General Motors Technical Assistance Center for further assistance. Customer may state that the phone does not charge, charges slow, moves out of charging spot, or charges intermittently. Technician will need to gather information from the customer. The information needed make, model, and wireless charging back cover model. Does customer currently uses wireless charging at home and /or office, if so what brand. Is the phone Bluetooth paired to the vehicle? Does customer run applications from the phone? If it is a ATS or CTS customer are they aware of the vehicle?s Heater-Vent-Air Conditioning cooling the phone when it is ON it extends time phone will charge. Also is the cover being used from the phone provider? When the technician calls General Motors Technical Assistance Center select the Electrical prompt.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provide policy information of the JOB CARD, for a repair on vehicles and what is acceptable - customer authorization; Service manager approvals and transaction authorization; Details of concern, cause and correction; Labor Time; Technician ID and acoutablity of labor time; Proper documentation and retension of warranty parts; Accurate sublet charges and receipts; Add on concerns after the Job Card has been written.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about what XM offerings are available for vehicles. A dealer or customer can access the website listed below for vehicle specific XM offerings and availability.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles with wireless fidelity inoperative after the OnStar module was replaced. Technician will need to perform a WIFI Activation using Service Programming System.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician how determine if the vehicle is equipped with wireless fidelity. Technician should check the Regular Production Option Code list for (VV4).
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D-37 history in the Vehicle Communication Interface Module or telematics communication interface control module. Engineering has determined that this code will only display in history on the scan tool and will not cause issues with OnStar system operation.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have the power tilt and telescoping steering column does not recall with the memory functions. Technician will need to reprogram the Seat Memory Control Module using Service Programming System to address this concern.
Source components: ELECTRICAL SYSTEM · SEATS:FRONT ASSEMBLY:POWER ADJUST · STEERING.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a Malfunction Indicator Lamp on or engine misfire, rough idle, extended crank, or crank no start in some cases. Technician will need to perform published Service Information diagnostics. If technician finds carbon an upper engine and valve cleaning should be performed.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have an itch or squeak type noise from the top left side of the dash while driving. Technician will need to add 1 millimeter of thick felt tape to full perimeter of the Heads Up Display shroud.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary bulletin provides a procedure to remove and inspect the clutch select solenoid valve for damage, located in the valve body to correct the customers concern of reduced acceleration at low speeds and trans slip at lauch.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician on a concern of body pressure booming. This concern may be more noticeable when the active fuel management is engages and the engine is in 4 cylinder mode. The roof sheet metal may not be attached to the roof bows any longer. If equipped with a sunroof it may leak or be misaligned with the roof. Technician is to follow the steps to apply vibration control material between the roof bow and the roof sheet metal. Any roof bow that is no longer bonded to the sheet metal must be repaired. Remove the old material with an appropriate tool. Once the old material is removed install the appropriate thickness foam shim to fill the gap between the roof sheet metal and the roof bow. The foam should be placed in 5 inch lengths and placed in 5 locations along the bow using vibration control material to fill the distance between the foam shim. If the space between the bow is 6 millimeters or less just use the vibration control material.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about the wireless charging module has been placed on restriction through the General Motors Technical Assistance Center. Dealer will need to call General Motors Technical Assistance Center for further assistance. Customer may state that the phone does not charge, charges slow, moves out of charging spot, or charges intermittently. Technician will need to gather information from the customer. The information needed make, model, and wireless charging back cover model. Does customer currently uses wireless charging at home and /or office, if so what brand. Is the phone Bluetooth paired to the vehicle? Does customer run applications from the phone? If it is a ATS or CTS customer are they aware of the vehicle?s Heater-Vent-Air Conditioning cooling the phone when it is ON it extends time phone will charge. Also is the cover being used from the phone provider? When the technician calls General Motors Technical Assistance Center select the Electrical prompt.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary bulletin provides a procedure to perform a transmission inspection and adjustment before having to replace the parking pawl actuator if the inspection found no problem.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician that there have been some reports that the current engine hours are not correct and display 0.0. Technician will need to program the Instrument Panel Cluster using Service Programming System.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have an unwanted Stability Activation and/or a Service Stability message on the Driver Information Center. Technician may find a Diagnostic Trouble Code C0710. Technician should inspect for vehicles modifications before any in-depth diagnostics are performed.
Source components: ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC) · TRACTION CONTROL SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
14395 - CUSTOMER SATISFACTION. ON SOME VEHICLES, A PERFORMANCE ISSUE WITH THE ONSTAR® MODULE MIGHT IMPACT THE VEHICLE'S BATTERY LIFE. THIS CAN CAUSE A DEAD BATTERY IF THE VEHICLE IS NOT STARTED FOR APPROXIMATELY 4 DAYS. THIS CONDITION CAN OCCUR EVEN IF THE ONSTAR® SYSTEM IS NOT ACTIVE. DEALERS ARE TO REPLACE THE ONSTAR® MODULE. IF THE CUSTOMER DOES NOT HAVE AN ACTIVE ONSTAR® SUBSCRIPTION, THE ONSTAR® MODULE IS TO BE DEACTIVATED AFTER REPLACEMENT.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a change to the front license plate bracket color. The bracket is now black on all vehicles.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that when driving at highway speeds and closing the sunroof, it will reverse when it reaches the air deflector. Dealer will need to replace the sunroof motor for this concern.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin was created to help technician identify non GM calibrations for the gasoline engines and the damages that may be caused by aftermarket calibrations
NHTSA source summary · Original PDF not reviewed by Recallfolio
14616 - SERVICE UPDATE. THIS BULLETIN PROVIDES A SERVICE PROCEDURE TO REPROGRAM THE TRANSFER CASE CONTROL MODULE ON CERTAIN VEHICLES EQUIPPED WITH RPO NQH TRANSFER CASE. THESE VEHICLES MAY EXHIBIT A SERVICE 4WD MESSAGE WHEN STARTING THE VEHICLE AFTER IT HAS BEEN TURNED OFF WITH THE TRANSFER CASE CONTROL KNOB SET IN AUTO 4WD.
Source components: POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE).
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician that before calling General Motors Technical Assistance Center for assistance, there is some basic diagnostic information that must be obtained in order for General Motors Technical Assistance Center to provide proper direction in repairing the vehicle. Technician should use published Service Information vibration diagnostics, Pico scope, and Vibration Analysis Worksheet found in the Latest Version of Bulletin 03-00-91-001.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles with an inoperative CD player. Technician will need to contact General Motors Technical Assistance Center for further assistance.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin was created to help technician identify non GM calibrations for the gasoline engines and the damages that may be caused by aftermarket calibrations
NHTSA source summary · Original PDF not reviewed by Recallfolio
14450A - SERVICE UPDATE (REVISED TO INCLUDE NON-EXPORT VEHICLES). THIS BULLETIN PROVIDES A SERVICE PROCEDURE TO INSPECT THE AIR CONDITIONING REFRIGERANT WARNING LABEL ON CERTAIN VEHICLES. IF THE LABEL IS INCORRECT, THIS BULLETIN PROVIDES A SERVICE PROCEDURE TO REPLACE THE LABEL, INSPECT THE AIR CONDITIONING REFRIGERANT CHARGE, AND ADJUST THE AIR CONDITIONING REFRIGERANT CHARGE. IN EXTREMELY HIGH AMBIENT TEMPERATURES, POOR AIR CONDITIONING PERFORMANCE MAY BE EXPERIENCED IF THE AIR CONDITIONING SYSTEM WAS OVERCHARGED AT THE ASSEMBLY PLANT AS A RESULT OF THE INCORRECT LABEL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles with OnStar WIFI is inoperative after a VCIM replacement. Technician will need to contact General Motors Technical Assistance Center with module information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that are travelling from Canada to the United States. While in the United States they are unable to receive Turn-by-Turn directions. Due to the existing cellular provider not having roaming agreements in areas outside of Canada to support transmitting of the packet data required for Turn-By-Turn feature to operate. The customer has 3 options while traveling through the United Sates. First if the vehicle is equipped with a navigation radio they can request a "Destination Download" to the vehicle. Second if the customer uses the OnStar RemoteLink app they can send the directions to the vehicle. The third option would be to have the vehicle loaded with a ?500 phone number? The customer will no longer be able to use their Hands Free Calling minutes when the new 500 phone number is loaded. If a customer chooses to restore Hands Free Calling in the future a new phone number will be assigned to the vehicle; previous phone numbers are not available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that when the dome lamps are off, if the brake pedal is applied or turn signal is operated, the dome lamp will flash on and off. Technician will need to replace both front overhead console lamps with part number 23104411.
Source components: ELECTRICAL SYSTEM · EQUIPMENT · SERVICE BRAKES.
NHTSA source summary · Original PDF not reviewed by Recallfolio
CADILLAC: DUE TO FACTORY INTRODUCING OFFSET IN ALIGNMENT PARAMETERS AT ASSEMBLY PROCESS, LANE DEPARTURE WARNING, SERVICE DRIVER'S ASSIST MESSAGE AND INTELLBEAM HEADLAMP FUNCTION FAILS TO WORK PROPERLY. MODEL 2015 ESCALADES. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This information for Warranty administration - Changes the Service Policy and Procedures Section 1.6.2.11 and now is refered to Article 3.2.9 of the 1st addition manual for details of Technician Identification and Accounting of Labor Time
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that the navigation voice feedback is choppy, distorted, or garbled. Technician will need to press Settings, Voice, Audio Feedback Speed, and verify speed is set to Medium.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This prelimenary bulletin provides a procedure to calibrate or replace the camera to correct the customers concern of the Service Driver?s Assist message being displayed or the Lane Departure Warning and Intellibeam Headlamp function being inoperative
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary bulletin provides a procedure to remove and inspect the clutch select solenoid valve for damage, located in the valve body to correct the customers concern of reduced acceleration at low speeds and trans slip at lauch.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician that the Human Machine Interface, Radio or Tuner, radio controls, Integrated Center Stack, display, and Media Disc Players are placed on restriction through the General Motors Technical Assistance Center. Dealer will need to contact General Motors Technical Assistance Center for further assistance.
NHTSA source summary · Original PDF not reviewed by Recallfolio
14541 - CUSTOMER SATISFACTION. IF CERTAIN VEHICLES ARE DINGHY TOWED, THEIR TRANSFER CASE MAY BECOME LOCKED IN NEUTRAL WHEN PREPARING TO DISCONNECT THE VEHICLE ACCORDING TO THE PROCEDURES IN THE OWNER MANUAL. SPECIFICALLY, WHEN THE CUSTOMER CONNECTS THE BATTERY AND STARTS THE VEHICLE AS PART OF THE DISCONNECTING THE TOWED VEHICLE PROCEDURE (SEE OWNER MANUAL AT STEPS 3, 4, AND 5 OF THE DINGHY TOWING), A CODE IS SET THAT LOCKS THE VEHICLES TRANSFER CASE IN NEUTRAL. WHEN THIS OCCURS, THE DRIVERS INFORMATION CENTER PANEL WILL DISPLAY A SERVICE 4WD MESSAGE AND THE VEHICLE WILL NEED TO BE TOWED TO A DEALERSHIP TO HAVE THE CODE CLEARED. DEALERS ARE TO PLACE A COPY OF AN UPDATED DINGHY TOWING SUPPLEMENT IN THE OWNER MANUAL. THIS INFORMATION REPLACES THE INFORMATION LOCATED UNDER RECREATIONAL VEHICLE TOWING FOUND IN SECTION 10 OF THE OWNER MANUAL. GM WILL MAIL THE SUPPLEMENT TO CUSTOMERS OF RECORD.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary bulletin provides a procedure to install foam at the front doors to redirect the water away from the door hinges during cold conditions and to correct the customers concern of the front doors are hard to open when cold.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about owners that want the auto door lock disabled. There is no avalible setting or Body Control Module calibration to turn off the auto door locks.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the grounds ring terminal at the engine block for the bank with the concern and repair the wire.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have a repeat service 4 wheel drive message. Technician may find Diagnostic Trouble Codes C0398, C038D or C0397. Technician will need to reprogram the Transfer case control module with latest software available through tis2web. If the vehicle has Regular Production Option Code (NQH) and has a Diagnostic Trouble Code C0398 setting after being Dinghy towed please see the latest version of PIP5217. If the vehicle has a Diagnostic Trouble Code C0398, inspect circuits 7477, 7478, 7479 for any terminal or connection issues between the B2227 Gear Position Sensor and the Transfer Case Control Module and repair as needed.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicle that may have a Service Power Steering or Service Hybrid System message displayed on the Driver Information Center, Charging System indicator lamp on, Loss of power steering assist, and or Loss of 12 volt battery power. Technician will need to replace the Accessory DC Power Control Module.
Source components: ELECTRICAL SYSTEM · STEERING · STEERING:ELECTRIC POWER ASSIST SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that are travelling from Canada to the United States. While in the United States they are unable to receive Turn-by-Turn directions. Due to the existing cellular provider not having roaming agreements in areas outside of Canada to support transmitting of the packet data required for Turn-By-Turn feature to operate. The customer has 3 options while traveling through the United Sates. First if the vehicle is equipped with a navigation radio they can request a "Destination Download" to the vehicle. Second if the customer uses the OnStar RemoteLink app they can send the directions to the vehicle. The third option would be to have the vehicle loaded with a ?500 phone number? The customer will no longer be able to use their Hands Free Calling minutes when the new 500 phone number is loaded. If a customer chooses to restore Hands Free Calling in the future a new phone number will be assigned to the vehicle; previous phone numbers are not available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provide policy information of the JOB CARD, for a repair on vehicles and what is acceptable - customer authorization; Service manager approvals and transaction authorization; Details of concern, cause and correction; Labor Time; Technician ID and acoutablity of labor time; Proper documentation and retension of warranty parts; Accurate sublet charges and receipts; Add on concerns after the Job Card has been written.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that when the dome lamps are off, if the brake pedal is applied or turn signal is operated, the dome lamp will flash on and off. Dealer will need to replace both front overhead console lamps with GM Part Number 23104411.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician that when the vehicle is shut off while the radio is off and the analog clock is displayed, the radio will turn back on with muted audio if the customer restarts the vehicle. Dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have that the USB port is inoperative or they receive a message of ?No other media available? when pressing the Media button. Dealer should advise the customer engineering is aware of the concern and is currently working towards a resolution.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician about vehicles that the HD turns on unwanted when tuning to radio stations using voice commands. General Motors Engineering is aware of concern and currently evaluating.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the grounds ring terminal at the engine block for the bank with the concern and repair the wire.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that show an error message when a media disc is installed. Technician will need to check the Regular Production Option Code list to verify if the disc is compatible.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that engine oil dipstick indicates engine is over filled when performing a Pre-Delivery Inspection or after an oil and filter change. When it is time for the oil change, fill with the recommended amount of engine oil as specified in Service Information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This information bulletin provides a procedure for the technicians to perform a transmission re-learn to correct a customer concern of low milage harsh shifting.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blow warm. Technician will need to replace the compressor to condenser line and install the line bracket.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that engine oil dipstick indicates engine is over filled when performing a Pre-Delivery Inspection or after an oil and filter change. Technician will drain half a quart of oil.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that when starting the vehicle intermittently they have no audio except chime. Technician will need to disconnect the amplifier, turn on ignition, and verify approximately 12 volts on circuit 3999 connector X4 terminal 14. If no voltage is present, check circuit 3999 for an open and repair as needed.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician that If it is determined the crankshaft needs to be replaced complete the Service Information diagnostics to determine if the crankshaft requires replacement. If determined the engine has bearing and crankshaft damage, the engine should be replaced along with the oil cooler. Also ensure latest version of 09-06-04-026G to verify the Engine Control Module calibration is not an Aftermarket calibration.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician that the 8L90 8 Speed Automatic Transmission is on exchange through General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.