2013 Chevrolet VOLT Manufacturer communications & TSBs.Page 10
Original record summaries, dates and identifiers for this model-year. Records 901–1,000 of 1,952, ordered newest first. Dated records on this page: Mar 19, 2015–Aug 18, 2015.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Aug 18, 2015Service Bulletin/Repair Instructions
15-00-89-005
NHTSA communication ID: 10113810
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provides dealership personnel with policy and procedure requirements for essential tools that include consumable parts (U.S. Only).
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that will not charge and Service Engine Soon Malfunction Indicator Lamp on. Technician may find Diagnostic Trouble Codes P0AA6 and/ or a P1F0E set on 2011-2013 Volt or a P0DAA on 2014 Volt or Cadillac ELR in the Hybrid Powertrain Control Module 2. Technician will need to inspect the Hybrid/EV Battery Pack drain plug, located on the battery tray, regardless of fluid level at the Hybrid/EV Battery Pack coolant reservoir. If any moisture is found during the drain plug inspection, contact the General Motors Technical Assistance Center for further assistance. If the coolant level in cooling system is at the proper level and there is no moisture in the battery during the drain plug inspection, and the coolant freeze protection is between -10 and -40 degrees Fahrenheit, then update the Hybrid Powertrain Control Module2 and Battery Energy Control Module with the latest Calibrations in TIS-2-Web. Technician will need to gather all measurements recorded while evaluating Diagnostic Trouble Code P0AA6 and contact the GM Technical Assistance Center for further assistance.
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY · ENGINE AND ENGINE COOLING · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about iPhones will not always autoconnect through Bluetooth to the vehicle. If the vehicle has more than one device listed in the Bluetooth device list, and the last device used was an Apple product, the Apple products will not autoconnect. The system will connect to one of the other devices instead. This concern is usually noticed after Retained Accessory Power has cancelled and the vehicle has gone to sleep. Advise the customer that they will need to update their Apple device to the latest operating system.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides repair information to correct a customer concern of loss of power steering assist, hard to steer, and/or "Service Power Steering" message on in DIC.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · POWER TRAIN · STEERING.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about some vehicles that may have a concern of Bluetooth music skipping. This condition is a normal operating characteristic of the vehicle. Streaming music through Bluetooth uses a lot of the radio's processing resources. If the radio is also dedicating a large amount of resources to other applications such as navigation, booting, or XM Weather the Bluetooth audio may hesitate/skip as the system is being heavily loaded.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D stored in Telematics Communication Interface Control Module. Technician will check Global Warranty Management system for customer satisfaction program 15086 status. If the status of the customer satisfaction program 15086 was not completed follow the steps to get the Telematics Communication Interface Control Module replaced. If the status of customer satisfaction program 15086 is found completed contact General Motors Technical Assistance Center OnStar group for further assistance.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information to advise dealers about seat belt buckles not operating and/or seat belt warning light illumination, as well as difficulty latching and unlatching the buckle or the buckle release button sticking.
NHTSA source summary · Original PDF not reviewed by Recallfolio
BUICK/CADILLAC/CHEVROLET/GMC: DUE TO AN IMPROPER JUMP START, THE POWER STEERING FUSE WAS EITHER BLOWN OR FAILED, CAUSING A HARD STEERING. OR LOSS OF POWER STEERING ASSIST. MODEL 2013-16 LACROSSE, REGAL, MALIBU, 2010-13 EQUINOX, TERRAIN, 2014-15 ELR, 2014-16 IMPALA, 2012-15 VERANO, 2011-15 CRUZE, VOLT. *PE
Source components: STEERING · STEERING:ELECTRIC POWER ASSIST SYSTEM · STEERING:HYDRAULIC POWER ASSIST SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
GM: SOME VEHICLES WILL NOT CHARGE. THE CHECK ENGINE LAMP WILL BE ILLUMINATED. CURRENT CODE P0AA6 AND/OR P1F0E MAYBE SET IN THE HPCM2.ALSO INCLUDED MAKE/MODEL CHEVROLET/VOLT, CADILLAC/ELR, AND OPEL/AMPERA. MODEL YEAR 2011- 2014 *JS UPDATED 1/16/2014 *JS UPDATED 12/12/14. *PE UPDATED 2/12/16. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D stored in Telematics Communication Interface Control Module. Technician will use Global Diagnostic System 2 to review the Firmware Over-the-Air version. If the Firmware Over-the-Air version on the scan tool equals 6708 the technician will need to contact General Motors Technical Assistance Center for further assistance. If the Firmware Over-the-Air version on the scan tool is lower than 6708 Dealer can order the part thought the Instrument Sales and Service website process.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about customers that may complain of various concerns when using Bluetooth components. Technician should use the Preliminary Information to gather information from the customer on their Bluetooth device and the concern they are having before calling General Motors Technical Assistance Center.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides repair information for the correction of a customer concern of short duration musty odors emitted from the HVAC system at vehicle start-up in hot, humid conditions.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:APPLIANCE:AIR CONDITIONER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician of diagnostic instructions to take when the key will not fold into the fob or will not stay in the folded position. The technician may comment that the key in the fob will not fold close or stay latched closed. Damage to the folding mechanism could result from storing the key in the door lock cylinder and accidently bumping or making contact with the key fob. Please advise all dealer personnel to refrain from storing the key in the door lock even for brief periods.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides technicians with information to assist in identifying operating characteristics of manual transmissions that repair attempts will not change.
Source components: POWER TRAIN:MANUAL TRANSMISSION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician of a concern where the Onstar® menu is missing from the radio display. Pressing the white Onstar® push to talk button and say hide Onstar® menu will hide the menu and saying unhide menu will make the menu come back again.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides dealership personnel with information on new vehicle Pre-Delivery Inspection (PDI) process and to encourage delivering quality vehicles and generating higher CSi scores.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides dealership personnel with information on interior cleaning of Instrument Panel (IP), hard or plastic surfaces, seats, carpet, leather, vinyl, fabric cleaner, stain remover, restorer and product availability.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have an OnStar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down remove power to the OnStar module for five minutes. After the power has been removed for five minutes, if the OnStar system is working release the vehicle. If the OnStar system is still inoperative continue with published Service Information diagnostics.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides customer instructions on resetting all values associated with the Energy Usage center stack display, to correct a customer concern of Energy Info screen shows mileage accumulation using fuel when using battery power.
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY · ENGINE AND ENGINE COOLING.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician of an engine power reduced message on the driver information center after performing the Canada Onstar® 4G upgrade. If the concern is present park the vehicle outside and call General Motors Technical Assistance Center.
Source components: EQUIPMENT:ELECTRICAL · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information to dealership personnel regarding warranty codes generated by EL-50313 Midtronics GR8 Battery Tester/Charger required for claim processing on labor operations 4041510, 4041520 and 250 mile/400 km labor operation restriction (North America ONLY).
Source components: ELECTRICAL SYSTEM · EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have a Battery Saver Message or red Battery Indicator displayed in the Driver Information Center. Technician may find Diagnostic Trouble Code P0AF8 set in history. Technician will need to the 12 volt battery using the GR8 Battery tester. The technician will need to perform the Direct current Power Conversion Test published in Global Service Information to check for maximum current and voltage output. This test requires the use of a Carbon Pyle load tester. In addition, the technician can select the 14 Volt Power Module Control Function in the Engine Control Module and Accessory Power Module Setpoint in the Body Control Module by using the Scan Tool in order to check that the system is able to respond to current loads. If the test fails, if there were low voltage Diagnostic Trouble Codes or P0AF8 was set, the technician should confirm that the 200 amp fuse located in the X50D Fuse Block is torqued to correct specification. Technician should check the voltage on both sides of the 200 amp Fuse while there is a load applied and comparing the voltage readings. Voltage drop can be checked from the positive battery post to the Accessory Power Module side of the 200 amp fuse as well. If the Accessory Power Module will output current under a load but the voltage is low on both sides of the fuse when compared to the voltage output at the Accessory Power Module, check the following Service Information for any other Diagnostic Trouble Codes that may have led to the low voltage condition, Accessory Power Module output terminal is clean and torqued to specification, The Accessory Power Module output cable ring terminal is properly seated to the Accessory Power Module output terminal post and its condition, and test the voltage drop on the ground cables to the engine block, transmission, body and chassis to ensure they are within specification.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides diagnostic tips and repair information to correct a customer concern for intermittent engine no crank, intermittent exhaust Camshaft Position (CMP) sensor signal.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information to dealership personnel regarding original equipment battery part numbers and AC Delco replacement battery approved warranty part numbers.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides repair information for repairing the IP to body harness connector to correct a customer concern for intermittent Malfunction Indicator Lamp (MIL) illuminated with Reduced Engine Power displayed and DTC P2138 set.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about being unable to receive OnStar ?Over The Air? updates. Technician will need to press the OnStar button and verify they have an active account and that the call connects with data and location.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician that First Responder Guides for General Motors vehicles can be accessed via the web at http://www.gmstc.com.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that the vehicle did not fully complete a charge or that charging was interrupted. Technicians may find Diagnostic Trouble Codes P1E00 set in the Engine Control Module and P0D3E or P0D3F set in the Hybrid Powertrain Control Module. Technician will need to update the Battery Charger Control Module to address this concern.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have a Service Engine Soon Malfunction Indicator Lamp on. Technician may find a Diagnostic Trouble Codes P0C57, P0C58 and/or P0C62. When the technician has duplicated and is unable to find a repair after checking wiring and following normal diagnosis, please replace the Motor B Position Sensor to resolve the concern. Also insure that the Drive Motor Generator Control Module has the latest calibration.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have a Battery Saver Message or red Battery Indicator displayed in the Driver Information Center. Technician may find Diagnostic Trouble Code P0AF8 set in history. Technician will need to the 12 volt battery using the GR8 Battery tester. The technician will need to perform the Direct current Power Conversion Test published in Global Service Information to check for maximum current and voltage output. This test requires the use of a Carbon Pyle load tester. In addition, the technician can select the 14V Power Module Control Function in the Engine Control Module and Accessory Power Module Setpoint in the Body Control Module by using the Scan Tool in order to check that the system is able to respond to current loads. If the test fails, if there were low voltage Diagnostic Trouble Codes or P0AF8 was set, the technician should confirm that the 200 amp fuse located in the X50D Fuse Block is torqued to correct specification. Technician should check the voltage on both sides of the 200 amp Fuse while there is a load applied and comparing the voltage readings. Voltage drop can be checked from the positive battery post to the Accessory Power Module side of the 200 amp fuse as well. If the Accessory Power Module will output current under a load but the voltage is low on both sides of the fuse when compared to the voltage output at the Accessory Power Module, check the following Service Information for any other Diagnostic Trouble Codes that may have led to the low voltage condition, Accessory Power Module output terminal is clean and torqued to specification, The Accessory Power Module output cable ring terminal is properly seated to the Accessory Power Module output terminal post and its condition, and test the voltage drop on the ground cables to the engine block, transmission, body and chassis to ensure they are within specification.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have had multiple repair attempts are being performed on customer?s vehicles that exhibit vibration conditions without utilizing the support of General Motors Technical Assistance Center. If valid vibration frequency or Road Force Variation data has been collected and a repair attempt does not correct the customer complaint, contact General Motors Technical Assistance Center for further support. For any vehicles that remains unrepaired after being at the dealer for three days or more and a related bulletin or PI is not found, contact General Motors Technical Assistance Center for further support.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides dealership personnel with Global Warranty Management (GWM), Warranty Parts Center (WPC), and Parts Return Program information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have the OnStar wireless fidelity inoperative. Technician will need to contact General Motors Technical Assistance Center with a scan tool connect to the vehicle for further assistance.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have Service Stability Lamp on. Technician may find a current or history Diagnostic Trouble Code C012E and C12FE. Technician should follow Service Information diagnostics for Diagnostic Trouble Code C012E symptom code 00 in the Electronic Brake Control Module or C12FE in the Engine Control Module. If the vehicle has a current or history Diagnostic Trouble Code C012E symptom code 12 without a C012E symptom code 00 in the Electronic Brake Control Module and a C12FE in the Engine Control Module, the code sets due to a powertrain code or a power down issue with the vehicle, this is not related to the brakes. The technician should diagnose other Diagnostic Trouble Codes or issues with the vehicle first.
Source components: ELECTRICAL SYSTEM · ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC) · SERVICE BRAKES, ELECTRIC.
NHTSA source summary · Original PDF not reviewed by Recallfolio
14232A - SPECIAL COVERAGE (WARRANTY TRANSACTION INFORMATION REVISED). SOME 2012-2014 MODEL YEAR (MY) BUICK VERANO, 2011-2014 MY CHEVROLET CRUZE AND VOLT, 2010-2014 MY CHEVROLET EQUINOX AND GMC TERRAIN, AND 2013-2014 MY CHEVROLET MALIBU VEHICLES, EQUIPPED WITH ELECTRONIC POWER STEERING (NJ0/NJ1), MAY HAVE INCREASED FRICTION IN THE STEERING SYSTEM. THIS COULD CAUSE THE STEERING WHEEL TO STICK IN THE STRAIGHT-AHEAD POSITION AFTER DRIVING LONG DISTANCES ON A STRAIGHT HIGHWAY. THE STEERING WHEEL CAN BE TURNED BUT IT MAY REQUIRE INCREASED EFFORT. DEALERS ARE TO 1) REPLACE THE STEERING GEAR ON 2010-2012 MODEL YEAR VEHICLES; OR 2) REPROGRAM THE POWER STEERING CONTROL MODULE ON 2013-2014 MODEL YEAR VEHICLES.
Source components: STEERING:ELECTRIC POWER ASSIST SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D stored in Telematics Communication Interface Control Module. Technician will use Global Diagnostic System 2 to review the Firmware Over-the-Air version. If the Firmware Over-the-Air version on the scan tool equals 6708 the technician will need to contact General Motors Technical Assistance Center for further assistance. If the Firmware Over-the-Air version on the scan tool is lower than 6708 Dealer can order the part thought the Instrument Sales and Service website process.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about the rear view camera options on the vehicles equipped with rear view camera. The rear view camera brightness can be adjusted on some models while the transmission is in reverse and using the Menu or Select button. To turn off or on the guidelines in the rear view camera, use the radio display Config icon then Display, then the guidelines option.
Source components: BACK OVER PREVENTION: CAMERA SYSTEM · EQUIPMENT ADAPTIVE/MOBILITY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have Diagnostic Trouble Code P1A56 stored in history. Engineering as found that Diagnostic Trouble Code P1A56 will set falsely with no effect.
NHTSA source summary · Original PDF not reviewed by Recallfolio
GENERAL MOTORS: INFORMATION REGARDING SERVICE STABILITY LAMP BEING ON AND HISTORY OR CURRENT DIAGNOSTIC TROUBLE CODES (DTCS) C012E, C12FE. MODEL 2011-15 VOLT, 2014-15 SPARK EV, 2014-16 ELR. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
GEMS/CHEVROLET/BUICK: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. ON SOME VEHICLES, THE STEERING WHEEL WOULD STICK IN STRAIGHT AHEAD POSITION AFTER LONG DISTANCE DRIVING ON STRAIGHT HIGHWAY DUE TO STEERING SYSTEM HAVING AN INCREASED FRICTION AND TURNING WOULD BE AN INCREASED EFFORT. MODEL 2011-2014 CRUZE, VOLT, 2010-14 EQUINOX, TERRAIN, 2012-14 VERANO, 2013-14 MALIBU. *PE UPDATED 11/6/15. *PE
Source components: STEERING:HYDRAULIC POWER ASSIST SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
CHEVROLET: MALFUNCTION INDICATOR LIGHT ON WITH DTC'S P0D3E, OR P1E00. RELATES TO INCOMPLETE CHARGE OR THE CHARGE BEING INTERRUPTED. MODELS INCLUDE CHEVROLET VOLT MY 2011-2014 AND CADILLAC ELR MY 2014. *KB UPDATED 08/1/2013 *JS UPDATED 2/12/16. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician of a customer concern where the heated seat indicator light is not functioning or the heated seats are not up to operating temperature during a remote vehicle start event. This is normal operation of the heated seat during a remote vehicle start event. The electronic climate control module is not in a complete wake up state during a remote vehicle start mode and will not enable the light emitting diode. After a cold soak below 32 degrees Fahrenheit the seat will not get hot in the 10 minutes or less of the remote vehicle start mode. This is due to the fact that the heat element is not in direct contract with the seat surface while the seat is unoccupied and the foam below the heater is full cold insulating air which takes time to heat up. Technician is to communicate to the customer this condition is a normal operating characteristic of their vehicle. It will not impact the designed performance or reliability of the vehicle. Please share this information with the customer, including a copy of this message.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered seepage.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician for balancing a hybrid battery pack after replacing a battery section. Certain unlisted codes may be experienced when using the battery service tool EL50332. If the codes are experienced check the following before calling Midtronic. Please make sure the USB memory stick is fully inserted into the machine. Make sure to follow the on screen instructions do not hook the machine to the battery section until instructed to do so. The balance machine should be on the latest software version available by following the latest version of preliminary information number PI1125.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician to aid in diagnosing a concern of one or all of the following concerns. The customer may state that the reverse lamps are inoperative, the review back up camera is inoperative, and the dome lights are inoperative. Technician may find diagnostic trouble code B2615 set in the Body Control Module. Upon inspection it might be found that the F7DR 7.5 amp fuse is open in the right instrument panel fuse box. After initial inspection a concern can?t be found inspect circuit 6815 going to the drivers and passengers sun visor. It might be required to lower the front part of the headliner to perform the inspection. If a wiring concern is not found move each sun visor up and down and front to back to see if the fuse opens. If the fuse opens replace the sun visor that was being moved when the fuse opened.
Source components: BACK OVER PREVENTION: CAMERA SYSTEM · ELECTRICAL SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician to insure that global diagnostic service 2 diagnostic packages are up to date prior to learning the steering angle sensor for a diagnostic trouble code C710 symptom code 71 set in the electronic brake control module or the power steering control module. When rechecking for diagnostic trouble codes a U0074 U0077, U0180D, U01293, U0126, U0125, C0186, C0196, or C0287 are set and will not clear diagnose the Chassis bus. If no fault is found in the chassis bus check for an multiple diagnostic interface to data link connector issue. Technician is to try a different multiple diagnostic interface cable and attempt the steering angle sensor learn again following service information instruction then try to clear the codes again.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides repair information to correct a customer concern of a noise, vibration, moaning sound and/or rattle heard at idle or while driving.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician to not replace any parts for the XM weather, fuel, or movies tabs not working or no information coming up on the display. Apologize to the customer for the inconvenience and let them know that General Motors is working on a solution for this concern.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides information that a customer concern of a vehicle fuels slowly, cannot refuel or fuel pump shuts off before tank is full, is operator related and no repairs should be attempted to correct this condition.
NHTSA source summary · Original PDF not reviewed by Recallfolio
14522B - SERVICE UPDATE (REVISED PARTS INFORMATION SECTION, SERVICE PROCEDURE AND WARRANTY TRANSACTION INFORMATION). THIS BULLETIN PROVIDES A SERVICE PROCEDURE TO INSTALL AN EVAPORATIVE EMISSIONS CANISTER AND ONBOARD REFUELING VAPOR RECOVERY (ORVR) VENT LINE ON CERTAIN 2014-2015 MODEL YEAR CADILLAC ELR AND 2011-2015 CHEVROLET VOLT VEHICLES.
NHTSA source summary · Original PDF not reviewed by Recallfolio
14522A - SERVICE UPDATE (REVISED PARTS INFORMATION SECTION). THIS BULLETIN PROVIDES A SERVICE PROCEDURE TO INSTALL AN EVAPORATIVE EMISSIONS CANISTER AND ONBOARD REFUELING VAPOR RECOVERY (ORVR) VENT LINE ON CERTAIN 2014-2015 MODEL YEAR CADILLAC ELR AND 2011-2015 CHEVROLET VOLT VEHICLES.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have whistle, scrape or whine type noise while driving that may be more noticeable during regenerative braking. Technician may find this noise emanating from the left side of the drive unit. The tech may also state that the vehicle has a current or history diagnostic trouble code P0A46. The noise may be caused by the drive motor rotor bearing cage separated. Technician should replace the bearing with the new updated part number.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about the removal of the high voltage battery pack. Technician will need to disable high voltage and fully drain battery coolant before removing the electrical connections. After following the published high voltage disable procedure and properly draining the coolant from the battery cooling system, it may be helpful to use electrical tape to help seal the connections on the battery relay junction block. If coolant does enter these connectors, clean completely with electrical contact cleaner and low pressure compressed air, then apply a light coating of dielectric grease.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have a high-pitched whine noise during braking or accelerating. Technician will need to inspect the load floor, in the rear of the vehicle, for being properly secured. If the load floor is not fully seated check the cargo tray under the floor and insure everything is stowed in its own spot. An improperly stowed 120v charge cord set, cargo in the lower tray that can pop the load floor up, and damage to the load floor that causes the floor not to clip into place.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides repair information to correct a customer concern of Iitermittently key will not rotate in door or ignition lock cylinder.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information to dealership personnel regarding the use of stop leak additives in the coolant systems of particular GM models.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about Apple devices is inoperative or freezing when using the device via USB cable after an IOS8.x.x update. Technician will need to delete the radio from the phone and the phone from the radio. Also close out all apps on the device if it is an iPhone.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides repair procedure information to correct a customer concern of Transport Mode On message displayed in Driver Information Center (DIC) and/or battery light is flashing.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information to assist dealership personnel with the identification of vehicle headlamp, tail lamp, license lamp or fog/driving lamp damage that are not considered warrantable.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides technicians with information to help identify the differences between what is considered a fluid leak, and what is considered seepage.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about connectivity concerns when connecting an Apple device via USB cord. Technician should insure the customer is using an original equipment manufacturer Apple USB cable.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have whistle, scrape or whine type noise while driving that may be more noticeable during regenerative braking. Technician may find this noise emanating from the left side of the drive unit. The tech may also state that the vehicle has a current or history diagnostic trouble code P0A46. The noise may be caused by the drive motor rotor bearing cage separated. Technician should replace the bearing with the new updated part number.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · SERVICE BRAKES.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about the main power feed going to the following fuse blocks may be damaged or have poor terminal retention. Technician may comment that they cannot locate the terminals for the following fuse blocks to perform service repair. Technician will need to replace the body harness for this concern.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician about the calculation and operation of the engine oil life monitor. The monitor calculates the percent of oil life remaining, based on 3 pathways. The first pathway for oil life calculation is engine revolutions. The second pathway for oil life calculation is the mileage form the last rest for all General Motors powertrains except the Volt. The third pathway for oil life calculation is the amount of time the oil is in the engine. The Volt uses a 2 year timer instead of 1 year. It also uses the engine revolution counter. It does not use the mileage pathway to count down.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides repair information for a customer concern of a clunk noise when shifting into Drive or Reverse, or during heavy acceleration.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:LEVER AND LINKAGE:COLUMN SHIFT.
NHTSA source summary · Original PDF not reviewed by Recallfolio
14522 - SERVICE UPDATE. THIS BULLETIN PROVIDES A SERVICE PROCEDURE TO INSTALL AN EVAPORATIVE EMISSIONS CANISTER AND ONBOARD REFUELING VAPOR RECOVERY (ORVR) VENT LINE ON CERTAIN 2014-2015 MODEL YEAR CADILLAC ELR AND 2011-2015 CHEVROLET VOLT VEHICLES.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that the radio can be turned on after turning the ignition off and opening the driver?s door. The radio can then be turned back on after the vehicle's Retained Accessory Power has been canceled by simply pressing the power button on the radio. This is a normal characteristic of the key off operation.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin adds 2014 and 2015 model years to repair information for dealers for a customer who may inquire as to the availability of a passenger compartment (cabin) air filter for their vehicle.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on the Product Quality Center (PQC) assembly replacement process for Service Agents not required to contact PQC prior to assembly replacement.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on the Product Quality Center (PQC) assembly replacement process for Service Agents not required to contact PQC prior to assembly replacement.
NHTSA source summary · Original PDF not reviewed by Recallfolio
The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that are unable to charge the hybrid battery and the malfunction Indicator lamp is illuminated on the Instrument Panel Cluster. Technician may find a current or history code P16C1 or P16C2 set in the Battery Charging Control Module. Technician should update the Battery Charging Control Module with the latest software in Tis 2 Web. If the technician experiences any issues while programming the Battery Charging Control Module, please contact Techline for further assistance.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have an audio cue volume is too high or too low when starting or powering down the vehicle. Technician can adjust the volume of the cue audio by pushing config button on the center stack and then select radio settings and then audio cue options. Dealer should advise the customer that adjusting the radio volume knob while the audio cue is playing will also turn the volume up and down.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicle that may OnStar inoperative and Navigation/GPS/Compass issues. Technician may find Diagnostic Trouble Codes B101D sym 3C and or F0. Technician will gather data using a scan tool and contact General Motors Technical Assistance Center for further assistance. After approval technician will replace the OnStar module.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have Reverse lamps Inoperative, Rearview Back-Up Camera Inoperative ?If Equipped?, and Dome Lamps Inoperative. Technician may find Diagnostic Trouble Code B2615 in the Body Control Module. Technician may also find fuse F7DR to be open. Technician should inspect circuit 6815 going to the drivers and passenger's sun visor. Replace the affected sun visor that blows the fuse.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have a Service Engine Soon Malfunction Indicator Lamp and a reduce propulsion message on the Driver Information Center. Technician may find multiple battery voltage performance codes. Technician should record all the Diagnostic Trouble Codes in a session log. Technician should determine if the Diagnostic Trouble Codes are related to one battery interface module. If the Diagnostic Trouble Codes are across the pack in multiple sections technician will need to update the Battery Energy Control Module and Hybrid Powertrain Control Module 2 using Service Programming System. If the Diagnostic Trouble Codes return after updating, the technician will need to contact General Motors Technical Assistance Center for further assistance.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have whistle, scrape or whine type noise while driving that may be more noticeable during regenerative braking. Technician may find this noise emanating from the left side of the drive unit. The tech may also state that the vehicle has a current or history diagnostic trouble code P0A46. The noise may be caused by the drive motor rotor bearing cage separated. Technician should replace the bearing with the new updated part number.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides repair information for repositioning an A/C drain hose for a customer concern of water present on front passenger floor.
Source components: ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides repair information for repositioning an A/C drain hose for a customer concern of water present on front passenger floor.