Original record summaries, dates and identifiers for this model-year. Records 401–500 of 751, ordered newest first. Dated records on this page: Aug 22, 2014–Jul 28, 2015.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Jul 28, 2015Service Bulletin/Repair Instructions
V241505 2038161
NHTSA communication ID: 10123028
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Intake manifold runner position sensor issues): This document informs what repairs are needed to fix the issue. This document contains the fault codes necessary to check the warranty coverage for servicing this issue.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Windshield Wipers Streak or Smear): Windshield or rear window is streaked, has a snakeskin appearance, or the surface feels rough. To avoid unnecessary replacement of wiper blades, the condition and cleanliness of the windshield, rear window and wiper blades, should be checked first. This document contains information on how to diagnose, and service this issue.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Corrosion on Rear Door in Trim Strip Area): Because of incomplete bonding of the trim strip water can get between trim strip and door. Because of water ingress, corrosion is possible in the area of the guide holes. This document contains information on how to diagnose, and service this issue. This document also gives examples on filling out a claim form for the service.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Corrosion on the Front Door in Trim Strip Area): Because of incomplete bonding of the trim strip water can get between trim strip and door. This document contains information on how to diagnose, and service this issue. This document also gives examples on filling out a claim form for the service.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (Instrument Cluster Production Mode): This document informs the procedure to remove the production mode setting when it is displayed in the instrument cluster.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Air Conditioning, Cleaning of the Refrigerant Circuit (U.S.Only)): In cases where an air conditioning system component (such as a compressor or other system component) has failed and debris from the compressor or component is circulated throughout the refrigerant circuit, the refrigerant circuit must be cleaned of any and all debris or damage to the replacement components will result. This document contains information on how to diagnose, and service this issue.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT:APPLIANCE:AIR CONDITIONER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (HVAC, Unpleasant Odor): Unpleasant odor is coming from Heating and Ventilation system. Odor mainly occurs after vehicle has been sitting (unused) at least 5 hours and within 20 to 60 seconds after vehicle is first started. This document contains information on how to diagnose, and service this issue.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This document contains the VW Elsa Newsletter that contains a general overview of wiring diagrams updates, technical bulletins, pending service solutions, tech tips, campaigns, updates, and suggestions.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Warranty Information (Policies and Procedures Bulletin): Volkswagen has extended the warranty for the high-pressure fuel pump (HPFP) under specific conditions to 10 years or 120,000 miles, whichever occurs first, from the vehicle's original in-service date, for certain 2009 - 2012 Model Year (MY) Volkswagen TDI® Clean Diesel Engine vehicles
NHTSA source summary · Original PDF not reviewed by Recallfolio
This document contains the VW Elsa Newsletter that contains a general overview of wiring diagrams updates, ElsaPro infomedia icons grayed out, workshop equipment tool storage application, technical bulletins, pending service solutions, tech tips, campaigns, updates, and suggestions.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (Coolant Leak or Repeat Coolant Leak from the Water Pump Area): The document informs to inspect for issues, and why issues may happen. It also notes how to fix the issue, and other issues that could happen while repairing the issue
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (Radiator Identification Sensor): On TSI (2.0l CCTA, CBFA) equipped vehicles with fault code P2568 Direct Ozone Reduction Catalyst Temperature Sensor, this fault refers to - G611- as Radiator Identification Sensor. If the radiator requires replacement on any above listed vehicle, the -G611- will be packaged separately within the radiator packaging. The new sensor will need to be bonded to the radiator.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Sunroof or Power Sunshade, Does Not Open/Close or Automatic Operation Does Not Function). This document contains Warranty information for coverage, and informs of methods to to service the issue
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (Heated Rear Window, One or More Lines Inoperative): To detect which line(s) is inoperative, utilize a volt meter to check for 0 V, which will be present after the open in the grid line. The check must be performed with the engine running and heated rear window switched on. Switch OFF the ignition and visually locate the damage.
Source components: ELECTRICAL SYSTEM · VISIBILITY:GLASS, SIDE/REAR · VISIBILITY:POWER WINDOW DEVICES AND CONTROLS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Rear Door Glass Inoperative): The rear glass cannot be opened / closed, the rear glass may slide down into the door, or the rear glass motor operates but the glass does not move. This document contains the fault codes, and procedure to service these issues
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (High Pressure Fuel Pump Diagnosis): Completing the GFF high pressure pump function test is essential to diagnose proper pump operation and to avoid unnecessary replacements
Source components: ELECTRICAL SYSTEM · ENGINE · FUEL SYSTEM, GASOLINE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
VOLKSWAGEN DEALERSHIP COMMUNICATION: Volkswagen announced a warranty extension program to cover the High Pressure Fuel Pump on 2009-2012 model year TDI Clean Diesel Engine vehicles
NHTSA source summary · Original PDF not reviewed by Recallfolio
VOLKSWAGEN DEALERSHIP COMMUNICATION: This document announced a warranty Volkswagen extension program to cover the High Pressure Fuel Pump on 2009-2012 model year TDI Clean Diesel Engine vehicles.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (High Pressure Fuel Pump Diagnosis): Completing the GFF high pressure pump function test is essential to diagnose proper pump operation and to avoid unnecessary replacements.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Rear Door Glass Inoperative issue diagnosis): The rear glass cannot be opened / closed, the rear glass may slide down into the door, or the rear glass motor operates but the glass does not move
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (P2014 or P2015 Intake Manifold Faults Stored in ECM Fault Memory ): Document discusses diagnosis Codes necessary to diagnosis, and potential remedy of issue. The diagnosis codes for checking warranty coverage for servicing the vehicle are also available
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (Rear View Camera Inoperative issues): The rear view camera operates in conjunction with the rear parking aid system. If there are no faults in the radio or rear view camera, be sure to check the parking aid system for faults. Buzzer or sensor faults must be corrected for proper rear view camera operation.
Source components: BACK OVER PREVENTION: CAMERA SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
VOLKSWAGEN: BEFORE REAR VIEW CAMERA IS PROPERLY OPERATIONAL, SHOULD BE CONNECTED TO BUZZER OR SENSOR FAULTS AND WORKING IN CONJUNCTION WITH REAR PARKING AID SYSTEM. MODELS 2009-15 TIGUAN, CC, PASSAT, TOUAREG. *PE
Source components: BACK OVER PREVENTION: CAMERA SYSTEM · EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
When performing SVM updates, the scan tool should be hardwired to the vehicle and the Bluetooth physically turned off. A hard wired internet connection is also recommended.
Source components: ELECTRICAL SYSTEM · EQUIPMENT · EQUIPMENT:ELECTRICAL:INFOTAINMENT:BLUETOOTH/WIFI.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (SVM Update Instructions): This document informs when performing SVM updates, the scan tool should be hardwired to the vehicle and the Bluetooth physically turned off. A hard wired internet connection is also recommended.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Front Fender - Corrosion on Wheel Arch): The wheel liner touches the arch area of the fender and rubs off the paint in the contact area. The corrosion is caused by dirt accumulations and movements of the wheel liner. The document informs how to identify affected parts. It then gives direction on servicing the issue
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Fuel Additive to Help Prevent Sporadic Misfire Faults): Fuel quality impacts the operating performance, efficiency and service life of the engine. The use of poor quality fuels may result in deposit build up on the fuel injectors and intake valves. This may result in a rough running condition, sporadic misfires, or cold start misfire faults storing in the ECM fault memory. This document informs a Volkswagen approved fuel additive is available to help remove and prevent deposits on fuel injectors and intake valves.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (Electro ? Steering - DTC 01309 008 ?No Communication with -J500-? is Stored in the ABS/ESP Module Only): This document informs If, after replacement of the steering rack, fault code 01309 008 is set in the ABS/ESP module only, follow the test plan in GFF for Driver Steering Recommendation (DSR) or channel 3 activation. If the test plan fails to clear the fault, follow the directions in this document using Vehicle Self Diagnosis in Address Word 44 - Steering Assistance:
NHTSA source summary · Original PDF not reviewed by Recallfolio
Disconnect both O2 sensors (front and rear), start engine and let idle. Check MVB's 41/4 and 136/4 and verify have both changed from a 1 to a 0 (you may have to drive the car 4 miles to get them to reset to 0). Also a key cycle may be required for values to reset. This forces the ECM to re-learn the O2 sensor adaptation. Once MVB 41/4 and 136/4 read 0, re-connect the O2 sensors, road test and recheck for faults.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING · ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (Oxygen Sensor Reset Procedures): This document informs of the procedure to rest oxygen sensors -For 2009-2014 vehicles with engine codes CJAA or CBEA: -For 2012-2015 vehicles with engine codes CKRA, CVCA or CRUA:
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Electric Coolant Fans Continue to Run after Ignition is Switched OFF): This documentation informs it is considered normal operation for the electric coolant fans to continue to run for up to 15 minutes after the ignition is switched off in gasoline engine applications, and up to 16 minutes in diesel engine applications. The production solution to service this issue is that no production change is required.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (2.0L CCTA/CBFA Coolant Leak or Repeat Coolant Leak from the Water Pump Area): Inspect the water pump for signs of contact with engine oil. Engine oil may cause the water pump gasket to swell, which may lead to a coolant leak. This document informs of the precaustions necessary if a water pump replacement is necessary.
Source components: ENGINE AND ENGINE COOLING:COOLING SYSTEM · ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (ECM Fault P1250 "Fuel Level Too Low" Will Not Clear): This document informs to clear static ECM fault P1250 "Fuel Level Too Low", add fuel to vehicle and complete a road test of at least 10 miles. Simply adding fuel without completing a road test may not allow fault to clear.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (Common Rail TDI ? Fuel Filter Replacement and Prime/Bleed Procedure): This document informs when replacing fuel system components on the Common Rail TDI engine (including the fuel filter), the fuel system must be primed. The procedure should be available on most models through Guided Functions. If not shown, then access through Control Module OBD. Run ?Basic Settings block 35? three times in a row. This activates the electric fuel pumps and bleeds the fuel system. Once the system has been bled, it will be necessary to start the engine and idle for a minimum of 5 minutes before depressing the gas pedal.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Install a vacuum gauge on the dipstick tube and check crankcase vacuum at idle. Compare to a known good vehicle. If the vacuum reading is lower than the comparison vehicle, visually inspect for oil leaks between the engine and the transmission. Smoke test the crankcase by connecting the EVAP smoke machine to the dipstick tube and inspect for leaks at the rear main seal (this will limit pressure to 2 PSI). DO NOT apply shop air to the dipstick tube or the crankcase. If a rear main seal leak is identified, replace the seal. Once replaced, recheck crankcase vacuum at idle. If low, check for additional oil leaks and verify crankcase breather operation (repairing as necessary). Erase the faults and road test 10 miles to recheck operation.
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (RNS 510? Replacement Radio/Navigation Unit has no Sound): Replacement RNS 510 radio/navigation units may be shipped in transportation safeguard mode and therefore will have no sound output. This document informs how to deactivate the safeguard mode.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some Golf, GTI, Jetta, and Passat vehicles equipped with electromechanical power steering have the G85 steering angle sensor located in the steering rack. These vehicles do not have a G85 in the steering column. To determine G85 location, check the J500 Power steering control module part number in the GFF printout. Do not use the part number on the steering rack for this check.
Source components: BACK OVER PREVENTION · ELECTRICAL SYSTEM · ELECTRICAL SYSTEM:ADAS:PARKING ASSIST:SENSORS · POWER TRAIN · STEERING · STEERING:RACK AND PINION:RACK · STEERING:STEERING CONTROL MODULE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (2009-2015 Jetta, Eos, Rabbit, Golf, GTI, Passat, CC, and Tiguan Equipped with Electromechanical Power Steering ? G85 Location Identification Tip): Ths document informs of the location of the G85 steering sensor. The sensors expected settings, and which vehicles do not have this sensor for electromechanical power steering.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Air Conditioning, Cleaning of the Refrigerant Circuit): In cases where an air conditioning system component (such as a compressor or other system component) has failed and debris from the compressor or component is circulated throughout the refrigerant circuit, the refrigerant circuit must be cleaned of any and all debris or damage to the replacement components will result. Debris can be dispersed throughout the refrigerant circuit after a/c component damage. In order to maintain A/C operating efficiency, it is important to flush the refrigerant circuit after A/C component repairs.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Intake Manifold Faults Stored in ECM Fault Memory issues): This document informs of a failure of Intake manifold causing fault codes to be stored in the ECM. The production solution improved intake manifold design. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
VOLKSWAGEN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. AN EXTENSION WARRANTY, WITH SPECIFIC CONDITIONS, 10 YRS OR 120,000 MILES,WHICHEVER IS FIRST, HAS BEEN ISSUED FOR EMISSIONS CONTROL SYSTEMS WARRANTY FOR INTAKE MANIFOLD AND FUEL INJECTORS. MODEL 2008-2011. *PE
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (Comfort Module (J393) or BCM (J519) Replacement): This document informs if a comfort or body control module is replaced during normal diagnosis, make sure the factory mode has been switched OFF. This can be accomplished by selecting guided function of either the J393 or J519 or control module OBD of J393 or J519 then selecting adaptation channel 99. Failure to deactivate factory mode will create a concern where the door locks will not lock and/or unlock with the switch and/or the remotes.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Intake Manifold Fault issues): This document informs of Intake Manifold issues that are recognized in the ECM fault memory. The Production Solution to this issue was an improved intake manifold design. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
The DLC is intended for use with diagnostic scan tools and by emissions testing stations. However, aftermarket devices (i.e., drive data recorders) that connect to the DLC have now become available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Intake Manifold issues): This document informs of a failure of Intake manifold causing fault codes to be stored in the ECM. The fault codes are written in the document. The product solution for this issue an Improved intake manifold design. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Engine Oils Which Meet Volkswagen Oil Quality Standard): This document informs of a sample list of products generally available in the North American market that meet the Volkswagen Oil Quality Standard
NHTSA source summary · Original PDF not reviewed by Recallfolio
Use the diagram below to test the N75 Solenoid Valve in the event of a turbocharger fault code such as P0299 or P0234. This applies to Mechanical Injection Style Diesel Engines, Pumpe Duse Style Diesel Engines and the new Common Rail Style Diesel Engines.
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL · ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER · FUEL SYSTEM, DIESEL · FUEL SYSTEM, GASOLINE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
When diagnosis on the above engine leads to the testing of the N75, please refer to the picture below. The diagram shows which vacuum ports on the N75 valve should hold vacuum and which ones should not.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips 92006-2014 Vehicles with 2.0T Gasoline Engine - N75 Solenoid Valve Diagnosis): When diagnosis on the above engine leads to the testing of the N75, please refer this document with graphical aid. The diagram shows which vacuum ports on the N75 valve should hold vacuum and which ones should not. Turbocharger fault codes P0299 and P0234 can be diagnosed using this test.
Source components: ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Quick Reference Update Guide: This document informs of the corresponding software/hardware and disc availability to the customer concerns about a vehicle
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (Electro - Steering issues): If, after replacement of the steering rack, fault code 01309 008 is set in the ABS/ESP module only, follow the test plan in GFF for Driver Steering Recommendation (DSR) or channel 3 activation. If the test plan fails to clear the fault, follow the directions in this document
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (Comfort Module (J393) or BCM (J519) Replacement): This document informs If a comfort or body control module is replaced during normal diagnosis, make sure the factory mode has been switched OFF. This can be accomplished by selecting the test plan through GFF or through Vehicle Self Diagnosis in adaptation channel 99. Failure to deactivate factory mode will create a concern where the door locks will not lock and/or unlock with the switch and/or the remotes.