Original record summaries, dates and identifiers for this model-year. Records 1,001–1,100 of 1,336, ordered newest first. Dated records on this page: Apr 2, 2013–Jul 17, 2013.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Jul 17, 2013Service Bulletin/Repair Instructions
PDI - BEETLE TEC
NHTSA communication ID: 10125768
NHTSA source summary · Original PDF not reviewed by Recallfolio
Beetle Perfect Delivery Inspection (PDI) - Technician and Detailer Inspections: A checklist to insure a customer receives a wonderful delivery of a vehicle that looks, feels, and meets the expectations of a new vehicle that he/she has purchased
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Damage on External Chrome or Aluminum Surfaces) The surfaces of chrome parts can get damaged in the production process or by external influences. This document discusses options for repairs covered under warranty, and methods to prevent damage.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Poor Power Steering Assistance): This document informs of Voltage drop in power steering control unit (J500) at start up or during steering operation leading to Poor Power Steering Assistance. The production solution to this issue is improved software. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
If the radio is switching to the Bluetooth audio selection whenever a paired phone makes any sound, such as typing or an incoming email or text message, check the BT-Audio Autoplay setting in the Media Setup menu as shown below. If BT-Audio Autoplay is on (checked), switch selection off and retest for concern. If radio software is 0016 or 0007, radio may require software update as per TB 91-13-05 (2031136) to allow BT-Audio Autoplay to switch off.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (Equipped with RCD-510 Premium 8 Radio - Radio Switches to Bluetooth Audio without Input): If the radio is switching to the Bluetooth audio selection whenever a paired phone makes any sound, such as typing or an incoming email or text message, check the BT-Audio Autoplay setting in the Media Setup menu as shown below. If BT-Audio Autoplay is on (checked), switch selection off and retest for concern. If radio software is 0016 or 0007, radio may require software update as per TB 91-13-05 (2031136) to allow BT-Audio Autoplay to switch off.
NHTSA source summary · Original PDF not reviewed by Recallfolio
In SAGA, the time units for the Volkswagen DoubleCheck labor operation were reduced in error from 50 time units to 30 time units during the system update posted on July 4th.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (Brake Electronics (ABS) Fault Code 02757 Diagnosis Tip): This document informs if the battery has a low state of charge or is disconnected, fault code 02757 "adapting tire pressures" may set in address 03 - Brake Electronics. The GFF test plan for this fault may prove inconclusive and the fault may not clear, even after performing TPMS reset using the button in glove box or through the MFI. To resolve fault, use ODIS control module OBD or VAS PC Vehicle self-diagnosis to run basic settings 42 under address 03 - Brake Electronics. After selecting basic settings 42, an activate button may be present, but should not be used. The display will change to "reset" once the procedure is complete. After completing basic settings, back out of Brake Electronics and remove the scan tool. Reset TPMS by pressing the "set" button in the glove box or making appropriate selection through MFI, and then road test vehicle to ensure fault does not return.
Source components: TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Oil Consumption Measurement): Customer states oil consumption is higher than the Volkswagen oil consumption standard of up to 0.5 quarts per 600 miles, or 0.5 liters per 1000 km. In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine. Typically, engines with specified break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in period. This document informs of oil consumption tests to check a vehicles performance.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tech Tips (Equipped with Turbocharged Engine Turbocharger Replacement Tip): If mechanical damage is found to the turbocharger (e.g. damaged compression wheel, loose or broken shaft), it is not enough to just replace the turbocharger. This document informs the procedure of checks for damage.
Source components: ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Four Wheel Alignment Overview, Steering Wheel off Center, Vehicle Drift/Pull): This Technical Bulletin provides an overview for performing vehicle four Wheel Alignment, and information on improving vehicle drift/pull using selective tire placement. This Technical Service Bulletin is divided into four (4) Sections: Section I: Alignment overview & Steering Wheel Off Center (SWOC). Section 2: Drift/pull concerns at Pre-Delivery Inspection (PDI). Section 3: Customer concerns for vehicle drift/pull Section 4: Volkswagen approved diagnostic balancers to address vehicle drift/pull
NHTSA source summary · Original PDF not reviewed by Recallfolio
If mechanical damage is found to the turbocharger (e.g. damaged compression wheel, loose or broken shaft), it is not enough to just replace the turbocharger.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (High Pressure Fuel Pump Diagnosis): Completing the GFF high pressure pump function test is essential to diagnose proper pump operation and to avoid unnecessary replacements. This document informs how to perform the diagnostic. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
VOLKSWAGEN: ON SOME VEHICLES, LOW FUEL STORED IN ECM PRESSURE, ENGINE WOULD CRANK BUT NOT START LONG PERIODS WITHOUT DRIVING, MAY RUN ROUGH AND/OR MIL ON. ALL MODELS 2008-2013. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
Beetle Perfect Delivery Inspection (PDI) - Technician and Detailer Inspections: A checklist to insure a customer receives a wonderful delivery of a vehicle that looks, feels, and meets the expectations of a new vehicle that he/she has purchased
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Generator Replacement): This document informs of Charging System inoperative/malfunctions, noise from engine compartment, accessory drive belt damaged or missing. From this condition one or more of the following symptoms are possible * Discharged Battery * No Start * Battery Indicator illuminated in Instrument Cluster * "Low Voltage" DTCs in various control modules * Engine noise * Accessory Drive Belt damaged or missing If a generator is replaced, there must be a confirmed failed GFF Test Plan available, or in the event of a mechanical failure of the component, complete and detailed documentation of the reason for the replacement, which must be submitted into the warranty claim comments.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING.
NHTSA source summary · Original PDF not reviewed by Recallfolio
VOLKSWAGEN: DUE TO ACCESSORY DRIVE BELT BEING DAMAGED OR MISSING, THE CHARGING SYSTEM IS INOPERATIVE OR MALFUNCTION, AND NOISE IS COMING FROM ENGINE COMPARTMENT. MODEL 2012-2014 ALL VEHICLES EXCEPT ROUTAN, TOUAREG HYBRID, JETTA HYBRID. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Manifold Absolute Pressure Range / Performance Stored in ECM Fault Memory): Monitoring strategy for the manifold absolute pressure sensor is too sensitive, causing fault code P0106 to incorrectly set in the engine control module. The production solution to this issue was improved software. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
Source components: ELECTRICAL SYSTEM:SOFTWARE · ENGINE AND ENGINE COOLING.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Automatic Transmission Fluid Requirements): At this time, Volkswagen Group of America, Volkswagen Canada do not support or warranty any use of aftermarket universal automatic transmission fluids or the machines used to flush the transmissions. This applies to all standard automatic and DSG transmissions.
Source components: POWER TRAIN · POWER TRAIN:AUTOMATIC TRANSMISSION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Update Programming of ECM for Concerns of a Bump Sensation after Coming to a Stop): Current ECM programming may cause a bump after coming to a stop, which may be felt through the chassis of the vehicle. This concern is caused by the engine torque being slightly high when the transmission goes into Neutral Control. Neutral Control is designed to reduce load on the engine during idle, in order to decrease emissions. The production solution to this issue was improved software for smoother stopping.
Source components: ELECTRICAL SYSTEM:SOFTWARE · ENGINE AND ENGINE COOLING.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Wiper Blade Inspection for Proper Warranty Coding): Wiper blade inspection guidelines for wear and tear, outside influence or a factory issue. This document informs what is under coverage for wiper blade issues.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical Bulletin (Sunroof / Sunshade, Will Not Open): The sunroof's "Basic Setting" has been unintentionally initiated by the customer. When the sunroof is closed and the rotary switch is pressed down in the closed direction for longer than 10 seconds, the basic setting program of the sunroof motor is initiated, and previous sunroof travel limits are lost. If the basic setting is not fully restored (by continuing to hold the rotary switch in the down position until the sunroof has completed its full open/closed travel), fault codes (panoramic sunroof only) will set and the sunroof can no longer be opened. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
After A/C control module J301 is replaced, fault 00898-005 ?Activation A/C Compressor No or Incorrect Basic Settings? may be stored. GFF test plan does not perform Activation A/C Compressor Basic Setting. To perform basic setting and resolve this fault, follow steps below
NHTSA source summary · Original PDF not reviewed by Recallfolio
When diagnosing a vehicle concern, and fault P130A ?Hide Cylinder? is found in the Engine Control Module (ECM), be aware that Engine Control Module (ECM) fault P130A ?Hide Cylinder? indicates a cylinder shut down and does not require diagnosis.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Be aware that fuel lines are color coded on vehicles with return fuel pressure lines. The black line is for fuel pressure supply and the blue line is for fuel pressure return. To verify correct line installation, remove the metal cover exposing the fuel pump flange assembly (generally under the rear seat). Refer to the ELSA Repair Manual for specific location. Check for raised arrows on the flange housing. The black line (Fuel Pressure Supply) attaches to the connection with the arrow pointing away from it. The blue line (fuel return) attaches to the connection with arrow pointing to it.
NHTSA source summary · Original PDF not reviewed by Recallfolio
When diagnosing a generator charging concern, it is recommended to verify operation of the one way clutch located in the generator pulley (if equipped) before replacing generator assembly. To check the one way clutch, remove the belt from the generator pulley and use a trim removal tool to hold fan blades inside generator, as shown below. When attempting to turn pulley by hand with fan blades held, pulley should spin freely in only one direction. If pulley spins freely in both directions, the one way clutch has failed and should be replaced before continuing diagnosis.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Technical Bulletin provides an overview for performing vehicle four Wheel Alignment, and information on improving vehicle drift/pull using selective tire placement. The information provided is based on the Hunter alignment equipment, Hunter GSP9700 with StraighTrak (VAS 6230x ) and John Bean RFV2000 with OptiLine (VAS 6311A) diagnostic balancer. The alignment information provided in this bulletin is not limited to the Hunter alignment equipment, and still applies with the use of other Volkswagen approved alignment equipment. The diagnostic procedure for selective tire placement, to improve vehicle drift/pull, will require the use of one of the diagnostic balancers previously mentioned.
NHTSA source summary · Original PDF not reviewed by Recallfolio
If a CV boot is found to be leaking grease on PDI and a clamp is found to be loose or not aligned properly, only the clamp should be replaced. If concern is found after the vehicle is sold, replace the complete CV joint.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION · POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:CVT.
NHTSA source summary · Original PDF not reviewed by Recallfolio
After a cold start, the engine coolant temperature gauge will slowly rise to approximately 190° F. When the F265 mapped thermostat opens, the gauge may drop by approximately 60° F before again rising to 190° F. No repairs should be attempted for this normal concern. F265 is pictured below.
NHTSA source summary · Original PDF not reviewed by Recallfolio
For concerns of Fault Code P117A ?Bank 1, correction Lambda middle reached adjustment limit? stored in the ECM, check that the O2 sensors have not been installed or connected improperly.
Source components: ENGINE AND ENGINE COOLING · ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
VOLKSWAGEN: HIGH PRESSURE FUEL PUMP DIAGNOSIS. ENGINE CRANK, NO START AFTER LONG PERIODS WITHOUT DRIVING. ENGINE MAY RUN ROUGH, AND OR MIL-ON WITH DTC P0087-LOW FUEL PRESSURE STORED IN ECM FAULT MEMORY. ALSO INCLUDED MODEL EOS YEAR 2013, MODEL GIT YEAR 2013, MODEL BEETLE COVERTIBLE YEAR 2009-2013. *JS UPDATED 7/10/13. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
To clear static ECM fault P1250 ?Fuel Level Too Low?, add fuel to vehicle and complete a road test of at least 10 miles. Simply adding fuel without completing a road test may not allow fault to clear.
Source components: ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM) · FUEL SYSTEM, OTHER · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
To clear static ECM fault P1250 ?Fuel Level Too Low?, add fuel to vehicle and complete a road test of at least 10 miles. Simply adding fuel without completing a road test may not allow fault to clear.
Source components: ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM) · FUEL SYSTEM, OTHER · UNKNOWN OR OTHER.