The manufacturer’s record · Page 3 of 6
Original record summaries, dates and identifiers for this model-year. Records 201–300 of 515, ordered newest first. Dated records on this page: Nov 5, 2015–Mar 2, 2017.
Back to 2014 Ram 2500 problems & recallsThis archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
NHTSA communication ID: 10217549
NHTSA source summary · Original PDF not reviewed by Recallfolio
Diesel Exhaust Fluid This bulletin provides information regarding the Diesel Exhaust Fluid (DEF) vehicle delivery fill guidelines.
Source components: FUEL SYSTEM, DIESEL · FUEL SYSTEM, GASOLINE.
Source record 10217549 at NHTSANHTSA communication ID: 10140017
NHTSA source summary · Original PDF not reviewed by Recallfolio
Diesel Exhaust Fluid This bulletin provides information regarding the Diesel Exhaust Fluid (DEF) vehicle delivery fill guidelines.
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL · FUEL SYSTEM, DIESEL.
Source record 10140017 at NHTSANHTSA communication ID: 10140011
NHTSA source summary · Original PDF not reviewed by Recallfolio
DAPAP Requirements - Addition of Exterior Mirrors (Rev. A)
Source components: VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR.
Source record 10140011 at NHTSANHTSA communication ID: 10139985
NHTSA source summary · Original PDF not reviewed by Recallfolio
Restraints Information Sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
Source components: SEAT BELTS.
Source record 10139985 at NHTSANHTSA communication ID: 10121863
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Air Suspension Control Module (ASCM) System Enhancements This Bulletin involves updating the (ASCM) software. A customer may describe the following: Cluster stays awake after ignition is turned off for 10 minutes or more. False message ?Battery Voltage Low - Start Engine to Change Ride Height? which appears in the Electronic Vehicle Information Center (EVIC). This condition may occur when the vehicle is first started and the suspension is switched from alternate trailer ride height to normal ride height.
Source components: ELECTRICAL SYSTEM · ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC).
Source record 10121863 at NHTSANHTSA communication ID: 10223866
NHTSA source summary · Original PDF not reviewed by Recallfolio
USB Charging Port Before replacing this part - this is a charge only USB port intended to charge smart phones and other low power USB devices. To verify proper functionality, turn on the ignition with no cables or devices plugged into the port. Connect a charging cable to the port, then connect the device. If the device receives power, the port is functioning to design. There are some minor compatibility issues with some charging cables including Apple Lightning cables. For questions regarding the charging port functionality, please call Dave Diovardi at Cell (248) 941-8704 or Rick Gordon at Cell (248) 630-6281.~
Source components: ELECTRICAL SYSTEM:WIRING:CONNECTORS/PLUGS:ACCESORY POWER OUTLET/JACK/PORT/USB/SAE/CIGARETTE LIGHTER.
Source record 10223866 at NHTSANHTSA communication ID: 10223828
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Radio Frequency Hub Module (RFHM) Enhancement This bulletin involves reprogramming the RFHM module with the latest available software. Customers may describe the instrument cluster is illuminating by itself after the ignition has been off for an extended period of time (10 minutes or more).
Source components: ELECTRICAL SYSTEM · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10223828 at NHTSANHTSA communication ID: 10223855
NHTSA source summary · Original PDF not reviewed by Recallfolio
Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform the this inspection. Inspect the sensor for a fluid coating on the sensor pins. Orange colored rain repellant can cause this fluid build-up. Clean the pins, drain the reservoir, and fill with Mopar approved washer fluid. Check to determine if the issue has been resolved. Continue with repair if necessary. Also, please inform the customer not to use Rain-X in the system to avoid this issue. Please contact Chuck Hood at cell (248) 613-7591 if you have questions or need additional information. Thank you.
Source components: VISIBILITY/WIPER.
Source record 10223855 at NHTSANHTSA communication ID: 10223854
NHTSA source summary · Original PDF not reviewed by Recallfolio
Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar® Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 N·m [21 ft. lbs.].
Source components: ENGINE AND ENGINE COOLING.
Source record 10223854 at NHTSANHTSA communication ID: 10121737
NHTSA source summary · Original PDF not reviewed by Recallfolio
Intake Grid Heater Grid Heater Relay 2012 - 2016 6.7L Cummins engines with Intake Heater issues or DTC P2609 and P0542, please replace the Intake Heater Grid and Relay as a set. 68210071A$ (relay) and 05187880A$ (grid). Inspect electrical cable between the heater grid and relay for signs of possible overheating. Replace cable as necessary.
Source components: ELECTRICAL SYSTEM · ENGINE.
Source record 10121737 at NHTSANHTSA communication ID: 10226283
NHTSA source summary · Original PDF not reviewed by Recallfolio
Center Console.
Source components: EQUIPMENT · STRUCTURE.
Source record 10226283 at NHTSANHTSA communication ID: 10130082
NHTSA source summary · Original PDF not reviewed by Recallfolio
Center Console If vehicle comes in for squeaking, clicking, or binding of the center console lid, verify the complaint by cycling the upper console lid. Check for a green dot sticker on the back of the console behind the rear panel by the hinge. ~ If the above complaint is verified and the console DOES NOT have a green dot sticker near the hinge (behind the back panel), order kit PN 68315574AA and install per the included instructions. Otherwise continue with the repair. Please reference TSB 23-001-16 Rev. E (or later version).
Source components: STRUCTURE.
Source record 10130082 at NHTSANHTSA communication ID: 10217742
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 6.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. NOTE: **This bulletin contains optional software update that should only be used in situations where the customer is specifically complaining of a Drone Noise, Shudder, Pulsation, or Vibration under light throttle applications while vehicle is operating in MDS/ECO mode. There will be two separate software options displayed on the wiTECH flash tab. The software file released for this condition contains the verbiage ?OPTIONAL?. The other file is the standard software that does not contain improvements for the Drone/Shudder concern. If for some reason the customer finds this shudder improvement objectionable, the PCM software may be returned/reflashed to the standard version. Both software versions will address the remaining conditions noted in the bulletin. A small number of customers may experience a surge, shudder or pulsation type sensation when driving on smooth road surfaces at highway speeds of 64-129 km/h (40-80 mph).** During normal diagnostics a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) present: · **P0335 - Crankshaft Position Sensor Circuit.** · P0300 - Multiple Cylinder Misfire, cold Idle misfire (DJ,D2 or DD vehicles only). · P030X - Cylinder Misfire (any cylinder). · P04D1 - Cooled EGR Temperature Sensor Circuit High. · P04D0 - Cooled EGR Temperature Sensor Circuit Low. · P2504 - Charging System Output High. · P0441 - Evap Purge System Performance. · P2066 - Fuel Level Sensor 2 Performance. · P0401 - EGR System Performance (DJ/D2 vehicles only). · P2096 - Downstream Fuel Trim System 1 Lean (DD/DP vehicles only). · P2098 - Downstream Fuel Trim System 2 Lean (DD/DP vehicles only). ·
Source components: ELECTRICAL SYSTEM:SOFTWARE · ENGINE AND ENGINE COOLING · EQUIPMENT · POWER TRAIN.
Source record 10217742 at NHTSANHTSA communication ID: 10135118
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 6.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. NOTE: **This bulletin contains optional software update that should only be used in situations where the customer is specifically complaining of a Drone Noise, Shudder, Pulsation, or Vibration under light throttle applications while vehicle is operating in MDS/ECO mode. There will be two separate software options displayed on the wiTECH flash tab. The software file released for this condition contains the verbiage ?OPTIONAL?. The other file is the standard software that does not contain improvements for the Drone/Shudder concern. If for some reason the customer finds this shudder improvement objectionable, the PCM software may be returned/reflashed to the standard version. Both software versions will address the remaining conditions noted in the bulletin. A small number of customers may experience a surge, shudder or pulsation type sensation when driving on smooth road surfaces at highway speeds of 64-129 km/h (40-80 mph).** During normal diagnostics a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) present: · **P0335 - Crankshaft Position Sensor Circuit.** · P0300 - Multiple Cylinder Misfire, cold Idle misfire (DJ,D2 or DD vehicles only). · P030X - Cylinder Misfire (any cylinder). · P04D1 - Cooled EGR Temperature Sensor Circuit High. · P04D0 - Cooled EGR Temperature Sensor Circuit Low. · P2504 - Charging System Output High. · P0441 - Evap Purge System Performance. · P2066 - Fuel Level Sensor 2 Performance. · P0401 - EGR System Performance (DJ/D2 vehicles only). · P2096 - Downstream Fuel Trim System 1 Lean (DD/DP vehicles only). · P2098 - Downstream Fuel Trim System 2 Lean (DD/DP vehicles only). ·
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN.
Source record 10135118 at NHTSANHTSA communication ID: 10129033
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 6.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. NOTE: **This bulletin contains optional software update that should only be used in situations where the customer is specifically complaining of a Drone Noise, Shudder, Pulsation, or Vibration under light throttle applications while vehicle is operating in MDS/ECO mode. There will be two separate software options displayed on the wiTECH flash tab. The software file released for this condition contains the verbiage ?OPTIONAL?. The other file is the standard software that does not contain improvements for the Drone/Shudder concern. If for some reason the customer finds this shudder improvement objectionable, the PCM software may be returned/reflashed to the standard version. Both software versions will address the remaining conditions noted in the bulletin. A small number of customers may experience a surge, shudder or pulsation type sensation when driving on smooth road surfaces at highway speeds of 64-129 km/h (40-80 mph).** During normal diagnostics a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) present: · **P0335 - Crankshaft Position Sensor Circuit.** · P0300 - Multiple Cylinder Misfire, cold Idle misfire (DJ,D2 or DD vehicles only). · P030X - Cylinder Misfire (any cylinder). · P04D1 - Cooled EGR Temperature Sensor Circuit High. · P04D0 - Cooled EGR Temperature Sensor Circuit Low. · P2504 - Charging System Output High. · P0441 - Evap Purge System Performance. · P2066 - Fuel Level Sensor 2 Performance. · P0401 - EGR System Performance (DJ/D2 vehicles only). · P2096 - Downstream Fuel Trim System 1 Lean (DD/DP vehicles only). · P2098 - Downstream Fuel Trim System 2 Lean (DD/DP vehicles only). ·
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10129033 at NHTSANHTSA communication ID: 10140210
NHTSA source summary · Original PDF not reviewed by Recallfolio
P/N 68111384AB: Inspect &Return: Switch - Speed Control You have been identified as either having stock, or have stock in transit to your dealership. Please return parts which have a pacakging date code of July 20th 2016. Reference pictures attached for suspect part identification. Please return parts backto your facing depot using Return Code 02, before 31 August, 2016.
Source components: VEHICLE SPEED CONTROL.
Source record 10140210 at NHTSANHTSA communication ID: 10140209
NHTSA source summary · Original PDF not reviewed by Recallfolio
05187880AC - Inspect and Return: Relay Assy - Heater Intake Air You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 05187880AC. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 31st August, 2016.
Source components: ENGINE · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE.
Source record 10140209 at NHTSANHTSA communication ID: 10140207
NHTSA source summary · Original PDF not reviewed by Recallfolio
Inspect and Return: Lamp Assy - Tail Light Rt/L You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of following part numbers: 68110016AC, 68110016AD, 68110016AE, 68110017AD, 68236104AC, 68236105AB. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 31 August, 2016.
Source components: EXTERIOR LIGHTING · EXTERIOR LIGHTING:TAIL LIGHTS.
Source record 10140207 at NHTSANHTSA communication ID: 10140206
NHTSA source summary · Original PDF not reviewed by Recallfolio
P/N 04573460 - Inspect &Return: Rocker Assy - Intake Valve RT You have been identified as either having stock, or have stock in transit to your dealership. Please return part number 04573460 which have a packaging date of 2016-06-13. Reference attached picture for reference. Please return suspect parts back to your facing depot using Return Code 02, before 29 August, 2016.
Source components: ENGINE AND ENGINE COOLING.
Source record 10140206 at NHTSANHTSA communication ID: 10140205
NHTSA source summary · Original PDF not reviewed by Recallfolio
68103256AGReturn: Line Assy - A/C Suction and Liquid You have been identified as either having stock, or have stock in transit to your dealership. Please return stock of part number 68103256AG packaged before 2016/08/01. Please return suspect parts back to your facing depot using Return Code 02, before 29 August, 2016.
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10140205 at NHTSANHTSA communication ID: 10140203
NHTSA source summary · Original PDF not reviewed by Recallfolio
68160775AB: Inspect and Return: Switch - Outside Door Handle You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 68160775AB. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 26 August, 2016.
Source components: LATCHES/LOCKS/LINKAGES:DOORS:LATCH · STRUCTURE · STRUCTURE:BODY:DOOR.
Source record 10140203 at NHTSANHTSA communication ID: 10084059
NHTSA source summary · Original PDF not reviewed by Recallfolio
"FLASH: POWERTRAIN DIAGNOSTIC AND SYSTEM ENHANCEMENTS THIS BULLETIN INVOLVES REPROGRAMMING THE POWERTRAIN CONTROL MODULE (PCM) WITH THE LATEST AVAILABLE SOFTWARE. THE FOLLOWING POWERTRAIN SYSTEM IMPROVEMENTS/ENHANCEMENTS ARE INCLUDED IN THIS SOFTWARE RELEASE. THESE ENHANCEMENTS ARE LISTED BY VEHICLE APPLICATION.
Source components: POWER TRAIN.
Source record 10084059 at NHTSANHTSA communication ID: 10221559
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tailgate controller If the vehicle is in for tailgate issue on all RAMs 2014, 2015, 2016 MY, FCA is looking to gather information prior to repairing the vehicle. Please contact Jim Smith via Cell Phone (248) 765-8972 If the dealership is within the Metro Detroit Area, Jim would like to analyze the vehicle in person prior to repair.
Source components: STRUCTURE:BODY:TAILGATE.
Source record 10221559 at NHTSANHTSA communication ID: 10136541
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tailgate controller If the vehicle is in for tailgate issue on all RAMs 2014, 2015, 2016 MY, FCA is looking to gather information prior to repairing the vehicle. Please contact Jim Smith via Cell Phone (248) 765-8972 If the dealership is within the Metro Detroit Area, Jim would like to analyze the vehicle in person prior to repair.
Source components: STRUCTURE:BODY:TAILGATE.
Source record 10136541 at NHTSANHTSA communication ID: 10121668
NHTSA source summary · Original PDF not reviewed by Recallfolio
Housing: Oil Filter Adapter Cummins equipped trucks ONLY; If you are replacing the oil filter adapter as a result of thread damage to the oil filter connector (Spud), DO NOT replace the entire adapter assembly. The oil filter connector is available separately (Part Number 04429355).~ If ordering an adapter due to some other issue, you must also order an oil bypass valve Mopar Part # 04797726AB, as these are not reusable. Please refer to all applicable published service information for oil bypass valve installation
Source components: ENGINE AND ENGINE COOLING.
Source record 10121668 at NHTSANHTSA communication ID: 10218270
NHTSA source summary · Original PDF not reviewed by Recallfolio
Fan Support Assembly, Fan Support Bearing, Fan Pulley If you are replacing this part due to fan hub bearing failure, please also replace the fan clutch assembly using current Mopar stock (part number 52014729A$).~ Once installed, contact Christine Donegan at (866) 799-1692 ext 1257 to initiate a fast track request for the return of the parts for analysis.
Source components: POWER TRAIN.
Source record 10218270 at NHTSANHTSA communication ID: 10140137
NHTSA source summary · Original PDF not reviewed by Recallfolio
Fan Support Assembly, Fan Support Bearing, Fan Pulley If you are replacing this part due to fan hub bearing failure, please also replace the fan clutch assembly using current Mopar stock (part number 52014729A$).~ Once installed, contact Christine Donegan at (866) 799-1692 ext 1257 to initiate a fast track request for the return of the parts for analysis.
Source components: POWER TRAIN.
Source record 10140137 at NHTSANHTSA communication ID: 10080240
NHTSA source summary · Original PDF not reviewed by Recallfolio
"FAN SUPPORT ASSEMBLY, FAN SUPPORT BEARING, FAN PULLEY IF YOU ARE REPLACING THIS PART DUE TO FAN HUB BEARING FAILURE, PLEASE ALSO REPLACE THE FAN CLUTCH ASSEMBLY USING CURRENT MOPAR STOCK (PART NUMBER 52014729A$).~ ONCE INSTALLED, CONTACT CHRISTINE DONEGAN AT (866) 799-1692 EXT 1257 TO INITIATE A FAST TRACK REQUEST FOR THE RETURN OF THE PARTS FOR ANALYSIS."
Source components: POWER TRAIN:DRIVELINE:CENTER SUPPORT BEARING.
Source record 10080240 at NHTSANHTSA communication ID: 10218261
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. The following powertrain system improvements/enhancements are included in this software release. These enhancements are listed by vehicle application. DS vehicles equipped with a 3.6L engine (Sales Code ERB). · **U0140 - Lost Communication With Body Control Module (attempting to clear this DTC will be unsuccessful). · ASD Relay Enhancements To Improve Fuel Pump Relay Initialization At Key On - (Auto Shutdown).** · Enhanced Automatic Oil Change Indicator (EAOCI) system improvements to switch to a severe duty cycle algorithm anytime the PCM is replaced to ensure the customer receives a timely oil change required message. · Corrected a generic scan tool display issue regarding Mode 6 data accuracy. DS vehicles equipped with a 5.7L engine (Sales Code EZH). · **U0140 - Lost Communication With Body Control Module (attempting to clear this · ASD Relay Enhancements To Improve Fuel Pump Relay Initialization At Key On - (Auto Shutdown).** · System improvements to prevent Malfunction Indicator Lamp (MIL) illumination with a Diagnostic Trouble Code (DTC) P0300 - Multiple Cylinder Misfire when using a block heater in ambient temperatures greater than -29°C (-20°F). · Enhanced Automatic Oil Change Indicator (EAOCI) system improvements to switch to a severe duty cycle algorithm anytime the PCM is replaced to ensure the customer receives a timely oil change required message. · Corrected a generic scan tool display issue regarding Mode 6 data accuracy. DJ, DD, and D2 vehicles equipped with a 5.7L engine (Sales Codes EZC or EZF). · U0140 - Lost Communication With Body Control Module (attempting to clear this · Transmission torque management enhancement when shifting from drive to reverse. · Software to correct Malfunction Indicator Lamp (MIL) illumination wi
Source components: ELECTRICAL SYSTEM · EXTERIOR LIGHTING · FUEL SYSTEM, GASOLINE · POWER TRAIN · STRUCTURE.
Source record 10218261 at NHTSANHTSA communication ID: 10140128
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. The following powertrain system improvements/enhancements are included in this software release. These enhancements are listed by vehicle application. DS vehicles equipped with a 3.6L engine (Sales Code ERB). U0140 - Lost Communication With Body Control Module (attempting to clear this DTC will be unsuccessful). ASD Relay Enhancements To Improve Fuel Pump Relay Initialization At Key On - (Auto Shutdown). Enhanced Automatic Oil Change Indicator (EAOCI) system improvements to switch to a severe duty cycle algorithm anytime the PCM is replaced to ensure the customer receives a timely oil change required message. Corrected a generic scan tool display issue regarding Mode 6 data accuracy. DS vehicles equipped with a 5.7L engine (Sales Code EZH). U0140 - Lost Communication With Body Control Module (attempting to clear this DTC will be unsuccessful. ASD Relay Enhancements To Improve Fuel Pump Relay Initialization At Key On - (Auto Shutdown). System improvements to prevent Malfunction Indicator Lamp (MIL) illumination with a Diagnostic Trouble Code (DTC) P0300 - Multiple Cylinder Misfire when using a block heater in ambient temperatures greater than -29°C (-20°F). Enhanced Automatic Oil Change Indicator (EAOCI) system improvements to switch to a severe duty cycle algorithm anytime the PCM is replaced to ensure the customer receives a timely oil change required message. Corrected a generic scan tool display issue regarding Mode 6 data accuracy. DJ, DD, and D2 vehicles equipped with a 5.7L engine (Sales Codes EZC or EZF). U0140 - Lost Communication With Body Control Module (attempting to clear this DTC will be unsuccessful). Transmission torque management enhancement when shifting from drive to reverse. Software to correct Malfunction Indicator Lamp (MIL) illumination wi
Source components: ELECTRICAL SYSTEM · EXTERIOR LIGHTING · FUEL SYSTEM, GASOLINE · POWER TRAIN · STRUCTURE.
Source record 10140128 at NHTSANHTSA communication ID: 10080307
NHTSA source summary · Original PDF not reviewed by Recallfolio
"FLASH: POWERTRAIN DIAGNOSTIC AND SYSTEM ENHANCEMENTS THIS BULLETIN INVOLVES REPROGRAMMING THE POWERTRAIN CONTROL MODULE (PCM) WITH THE LATEST AVAILABLE SOFTWARE. THE FOLLOWING POWERTRAIN SYSTEM IMPROVEMENTS/ENHANCEMENTS ARE INCLUDED IN THIS SOFTWARE RELEASE. THESE ENHANCEMENTS ARE LISTED BY VEHICLE APPLICATION. DS VEHICLES EQUIPPED WITH A 3.6L ENGINE (SALES CODE ERB). · **U0140 - LOST COMMUNICATION WITH BODY CONTROL MODULE (ATTEMPTING TO CLEAR THIS DTC WILL BE UNSUCCESSFUL). · ASD RELAY ENHANCEMENTS TO IMPROVE FUEL PUMP RELAY INITIALIZATION AT KEY ON - (AUTO SHUTDOWN).** · ENHANCED AUTOMATIC OIL CHANGE INDICATOR (EAOCI) SYSTEM IMPROVEMENTS TO SWITCH TO A SEVERE DUTY CYCLE ALGORITHM ANYTIME THE PCM IS REPLACED TO ENSURE THE CUSTOMER RECEIVES A TIMELY OIL CHANGE REQUIRED MESSAGE. · CORRECTED A GENERIC SCAN TOOL DISPLAY ISSUE REGARDING MODE 6 DATA ACCURACY. DS VEHICLES EQUIPPED WITH A 5.7L ENGINE (SALES CODE EZH). · **U0140 - LOST COMMUNICATION WITH BODY CONTROL MODULE (ATTEMPTING TO CLEAR THIS DTC WILL BE UNSUCCESSFUL). · ASD RELAY ENHANCEMENTS TO IMPROVE FUEL PUMP RELAY INITIALIZATION AT KEY ON - (AUTO SHUTDOWN).** · SYSTEM IMPROVEMENTS TO PREVENT MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATION WITH A DIAGNOSTIC TROUBLE CODE (DTC) P0300 - MULTIPLE CYLINDER MISFIRE WHEN USING A BLOCK HEATER IN AMBIENT TEMPERATURES GREATER THAN -29°C (-20°F). · ENHANCED AUTOMATIC OIL CHANGE INDICATOR (EAOCI) SYSTEM IMPROVEMENTS TO SWITCH TO A SEVERE DUTY CYCLE ALGORITHM ANYTIME THE PCM IS REPLACED TO ENSURE THE CUSTOMER RECEIVES A TIMELY OIL CHANGE REQUIRED MESSAGE. · CORRECTED A GENERIC SCAN TOOL DISPLAY ISSUE REGARDING MODE 6 DATA ACCURACY. DJ, DD, AND D2 VEHICLES EQUIPPED WITH A 5.7L ENGINE (SALES CODES EZC OR EZF). · U0140 - LOST COMMUNICATION WITH BODY CONTROL MODULE (ATTEMPTING TO CLEAR THIS DTC WILL BE UNSUCCESSFUL). · TRANSMISSION TORQUE MANAGEMENT ENHANCEMENT WHEN SHIFTING FROM DRIVE TO REVERSE.
Source components: ELECTRICAL SYSTEM:SOFTWARE · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
Source record 10080307 at NHTSANHTSA communication ID: 10140103
NHTSA source summary · Original PDF not reviewed by Recallfolio
You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 68143886AA. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 11 July, 2016. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
Source components: EQUIPMENT.
Source record 10140103 at NHTSANHTSA communication ID: 10140102
NHTSA source summary · Original PDF not reviewed by Recallfolio
You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 68174065AE. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 11 July, 2016. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
Source components: EQUIPMENT · EXTERIOR LIGHTING:HEADLIGHTS.
Source record 10140102 at NHTSANHTSA communication ID: 10140101
NHTSA source summary · Original PDF not reviewed by Recallfolio
You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 04685719AI. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 11 July, 2016. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
Source components: ELECTRICAL SYSTEM:IGNITION · ELECTRICAL SYSTEM:IGNITION:SWITCH · EQUIPMENT.
Source record 10140101 at NHTSANHTSA communication ID: 10140100
NHTSA source summary · Original PDF not reviewed by Recallfolio
You have been identified as either having stock, or have stock in transit to your dealership. Please return all stock of following part numbers: 68141880AH, 68141881AH, 68145625AI, 68145626AI, 68189480AF and replacement part numbers are 68141880AI, 68141881AI, 68145625AJ, 68145626AJ & 68189480AG respectively,which arein stockand available. Please return suspect parts back to your facing depot using Return Code 02, before 05 July, 2016. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
Source components: EQUIPMENT.
Source record 10140100 at NHTSANHTSA communication ID: 10140099
NHTSA source summary · Original PDF not reviewed by Recallfolio
You have been identified as either having stock, or have stock in transit to your dealership. Please return all stock of following part number: 05278632AF and replacement part number is 52030379AA which isin stockand available. Please return suspect parts back to your facing depot using Return Code 02, before 05 July, 2016. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
Source components: EQUIPMENT.
Source record 10140099 at NHTSANHTSA communication ID: 10140098
NHTSA source summary · Original PDF not reviewed by Recallfolio
You have been identified as either having stock, or have stock in transit to your dealership. Please return all stock of following part numbers: 1YG06JSCAC, 1YG06KEPAC, 1YG 06KFSAC, 1YG 06KGZAC, 1YG 06KBUAC and replacement part numbers are 1YG 1YG06KFSAD, 1YG 06KG ZAD, 1YG 06KBUAE respectively,which arein stockand available. Please return suspect parts back to your facing depot using Return Code 02, before 05 July, 2016. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
Source components: EQUIPMENT.
Source record 10140098 at NHTSANHTSA communication ID: 10140097
NHTSA source summary · Original PDF not reviewed by Recallfolio
You have been identified as either having stock, or have stock in transit to your dealership. Please return all stock of following part number: 68188889AE and replacement part number is 68188889AF which isin stockand available. Please return suspect parts back to your facing depot using Return Code 02, before 05 July, 2016. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
Source components: EQUIPMENT.
Source record 10140097 at NHTSANHTSA communication ID: 10140094
NHTSA source summary · Original PDF not reviewed by Recallfolio
Return: ALTERNATOR - ENGINE You have been identified as either having stock, or have stock in transit to your dealership. Please return all stock of following part numbers: R4801313AC replacement part number are 04801313AD respectively which are in stock and available. Please return suspect parts back to your facing depot using Return Code 02, before 8 July, 2016. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com
Source components: ENGINE · ENGINE AND ENGINE COOLING.
Source record 10140094 at NHTSANHTSA communication ID: 10140096
NHTSA source summary · Original PDF not reviewed by Recallfolio
You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of following part numbers: 68036213AA, 68036230AF, 68158196AC, 68158197AD, & 68158454AD. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 30 June, 2016. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
Source components: EQUIPMENT.
Source record 10140096 at NHTSANHTSA communication ID: 10140095
NHTSA source summary · Original PDF not reviewed by Recallfolio
68085119AE,Inspect and Return: Exhaust Pipe Assy - Frt W/Catalytic Converter You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 68085119AE. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 30 June, 2016. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR.
Source record 10140095 at NHTSANHTSA communication ID: 10137047
NHTSA source summary · Original PDF not reviewed by Recallfolio
Integrated Center Stack If vehicle is found within 50 mile radius of the Detroit Metro area please hold vehicle and contact:~ Contact one of the following:~ Daniel Acciacca CELL (586) 709-1537~ Michael Savich CELL (248) 214-7270~ Ayed Hadaad CELL (248) 941-8707~ Issue: On a 2015 & 2016MY LA (Challenger), LD(Charger) and LX (300), the Integrated Center Stack (ICS) may experience a lock-up/Inop condition (complete loss of functionality) during any vehicle diagnostic session (reading fault codes, clearing fault codes, reflashing of any module, etc.). If this occurs, do not replace the ICS. The module functionality can be restored if it is reset by disconnecting power to it (by removing fuse, battery disconnect or module connector disconnect).~
Source components: ELECTRICAL SYSTEM.
Source record 10137047 at NHTSANHTSA communication ID: 10137046
NHTSA source summary · Original PDF not reviewed by Recallfolio
A/C Compressor This applies to 2015 and 2016 UF and PF. Before replacing the AC compressor for noise, leaks , or in-op:~ After these questions have been answered please call one of the individuals below.~ Stev at cell (248) 867-0061~ Mark Briolat at cell (248) 345-0127~ If no response in 15 minutes, please continue with repair.~ 1) Check all AC plumbing connection for leaks with UV light. Any leaks found?~ 2) Does compressor pulley and clutch hub turn freely, or are they seized?~ 3) What was the amount of the recovered refrigerant?~ After these questions have been answered please call one of the individuals below.~ Stev at cell (248) 867-0061~ Mark Briolat at cell (248) 345-0127~ If no response in 15 minutes, please continue with repair.~ If the compressor is replaced, then:~ 4) Drain oil from compressor. What was quantity of oil recovered?
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10137046 at NHTSANHTSA communication ID: 10137045
NHTSA source summary · Original PDF not reviewed by Recallfolio
Hands Free Module - CTM ? Peiker For RT, JK and MK bodies only; Before replacing the Hands Free Module (HFM), please contact Gaurav Saxena at cell (248) 260-0583~ IMPORTANT - do not reset the HFM, clear codes or perform a battery reset before calling. Engineering is currently root causing this issue and your assistance is greatly appreciated. Seeking vehicles with HFM in a locked state, inoperative, or offline. If unable to reach this person within 15 minutes, then proceed with the necessary repair.
Source components: ELECTRICAL SYSTEM.
Source record 10137045 at NHTSANHTSA communication ID: 10137044
NHTSA source summary · Original PDF not reviewed by Recallfolio
Battery - Transmitter For vehicles within 12 Months in Service which have a "FOB Battery Low" message within Cluster or DTC B1A10 or B1A11 Active or Stored. Engineering is requesting complete FOB returned unopened (ie, battery not removed or FOB housing opened!). ~ All others, follow normal procedures.~ Please ensure Dealer Technicians are aware of this request to allow for gain in FOB Battery depletion understanding.
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY.
Source record 10137044 at NHTSANHTSA communication ID: 10226281
NHTSA source summary · Original PDF not reviewed by Recallfolio
Diagnosing A Urea Module That Is Exposed To Diesel Fuel This bulletin involves discussing what will happen to the rubber material used in the urea pump when exposed to diesel fuel. This unit is sometimes referred to as the Selective Catalyst Reductant (SCR) module or the Adblue Delivery Module (ADM). Units exposed to hydrocarbons have a particular failure mode, the rubber heater unit is crinkled and in some cases the metal heater protrudes through the rubber membrane. The rubber material used in this unit is designed to withstand Diesel Exhaust Fluid (DEF) only. Exposure to fluids that contain hydrocarbons (i.e. diesel fuel) will damage the unit beyond repair. Units returned that exhibit this failure mode will have warranty claims that are rejected. Units that exhibit this failure mode should be considered customer abuse and should not be covered under warranty. Use the Hydroscopic test paper (P/N 223-44-863) available through MoparEssentialTools.com to confirm exposure.
Source components: ENGINE AND ENGINE COOLING · FUEL SYSTEM, DIESEL.
Source record 10226281 at NHTSANHTSA communication ID: 10137067
NHTSA source summary · Original PDF not reviewed by Recallfolio
Diagnosing A Urea Module That Is Exposed To Diesel Fuel This bulletin involves discussing what will happen to the rubber material used in the urea pump when exposed to diesel fuel. This unit is sometimes referred to as the Selective Catalyst Reductant (SCR) module or the Adblue Delivery Module (ADM). Units exposed to hydrocarbons have a particular failure mode, the rubber heater unit is crinkled and in some cases the metal heater protrudes through the rubber membrane. The rubber material used in this unit is designed to withstand Diesel Exhaust Fluid (DEF) only. Exposure to fluids that contain hydrocarbons (i.e. diesel fuel) will damage the unit beyond repair. Units returned that exhibit this failure mode will have warranty claims that are rejected. Units that exhibit this failure mode should be considered customer abuse and should not be covered under warranty. Use the Hydroscopic test paper (P/N 223-44-863) available through MoparEssentialTools.com to confirm exposure.
Source components: FUEL SYSTEM, DIESEL.
Source record 10137067 at NHTSANHTSA communication ID: 10219808
NHTSA source summary · Original PDF not reviewed by Recallfolio
Power Fold Rearview Mirror Prior to replacing this part for a loose mirror, please first follow this procedure to reset the pivot mechanism. Move the mirror to its full forward position and then to full retract position using the power fold mirror button located on drivers side door panel. Perform this procedure three times. If this doesn't resolve the issue, then repair as necessary.~ Note: 1- The looseness of power fold mirror does not necessary indicate a defective mirror, it may be caused by folding it manually rather than using the power fold feature. If the mirror is adjusted manually out of the proper detent, always use the button to adjust it back into sync.~ 2- The intended use of the power fold mirrors is by pushing the button to fold and unfold the mirror. Only manually fold the mirrors when absolutely necessary.~ 3- In the circumstance where the left hand mirror and right hand mirror are in different positions, it may take up to three cycles (bottom pushes) to re-sync the mirrors together.
Source components: VISIBILITY.
Source record 10219808 at NHTSANHTSA communication ID: 10218248
NHTSA source summary · Original PDF not reviewed by Recallfolio
Pentastar Oil Filter Adapter: Before replacing this part, please call any one of the following people. Engineering is seeking information regarding this part.~ Dye must be used to determine where the leak is coming from before replacing. Also please check the recently updated Service Bulletin Number 09-008-15. ~ First: Nick Morand Cell (248) 410-8078 - Nick.morand@fcagroup.com Second: Bob Jackson Cell (248) 944-0466 - bob.jackson@fcagroup.com Third: Joe Lovell Cell (734 309-6467 - joe.lovell@fcagroup.com If a response is not received within 15 mins, then proceed with the necessary repair.~
Source components: ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:FILTER/SCREEN.
Source record 10218248 at NHTSANHTSA communication ID: 10218244
NHTSA source summary · Original PDF not reviewed by Recallfolio
Power Fold Rearview Mirror Prior to replacing this part for a loose mirror, please first follow this procedure to reset the pivot mechanism. Move the mirror to its full forward position and then to full retract position using the power fold mirror button located on drivers side door panel. Perform this procedure three times. If this doesn't resolve the issue, then repair as necessary.~ Note: 1- The looseness of power fold mirror does not necessary indicate a defective mirror, it may be caused by folding it manually rather than using the power fold feature. If the mirror is adjusted manually out of the proper detent, always use the button to adjust it back into sync.~ 2- The intended use of the power fold mirrors is by pushing the button to fold and unfold the mirror. Only manually fold the mirrors when absolutely necessary.~ 3- In the circumstance where the left hand mirror and right hand mirror are in different positions, it may take up to three cycles (bottom pushes) to re-sync the mirrors together.
Source components: PARKING BRAKE · POWER TRAIN · VISIBILITY.
Source record 10218244 at NHTSANHTSA communication ID: 10139934
NHTSA source summary · Original PDF not reviewed by Recallfolio
Pentastar Oil Filter Adapter: Before replacing this part, please call any one of the following people. Engineering is seeking information regarding this part.~ Dye must be used to determine where the leak is coming from before replacing. Also please check the recently updated Service Bulletin Number 09-008-15. ~ First: Nick Morand Cell (248) 410-8078 - Nick.morand@fcagroup.com Second: Bob Jackson Cell (248) 944-0466 - bob.jackson@fcagroup.com Third: Joe Lovell Cell (734 309-6467 - joe.lovell@fcagroup.com If a response is not received within 15 mins, then proceed with the necessary repair.~
Source components: ENGINE AND ENGINE COOLING.
Source record 10139934 at NHTSANHTSA communication ID: 10139930
NHTSA source summary · Original PDF not reviewed by Recallfolio
Power Fold Rearview Mirror Prior to replacing this part for a loose mirror, please first follow this procedure to reset the pivot mechanism. Move the mirror to its full forward position and then to full retract position using the power fold mirror button located on drivers side door panel. Perform this procedure three times. If this doesn't resolve the issue, then repair as necessary.~ Note: 1- The looseness of power fold mirror does not necessary indicate a defective mirror, it may be caused by folding it manually rather than using the power fold feature. If the mirror is adjusted manually out of the proper detent, always use the button to adjust it back into sync.~ 2- The intended use of the power fold mirrors is by pushing the button to fold and unfold the mirror. Only manually fold the mirrors when absolutely necessary.~ 3- In the circumstance where the left hand mirror and right hand mirror are in different positions, it may take up to three cycles (bottom pushes) to re-sync the mirrors together.
Source components: VISIBILITY:REARVIEW MIRRORS/DEVICES.
Source record 10139930 at NHTSANHTSA communication ID: 10228098
NHTSA source summary · Original PDF not reviewed by Recallfolio
3.2L - 3.6L Cylinder Head Assy Multiple cylinder head replacement. If cylinder head is replaced on a vehicle more than 1 time for any reason, please call any of the following people.~ First: Ron Dallison ? Cell (248) 292-9510 Ron.dallison@fcagroup.com ~ Second: Joe Lovell - Cell (734) 309-6467 joe.lovell@fcagroup.com~ If a response is not received within 15 mins, then proceed with the necessary repair.~
Source components: ENGINE AND ENGINE COOLING.
Source record 10228098 at NHTSANHTSA communication ID: 10228142
NHTSA source summary · Original PDF not reviewed by Recallfolio
Pentastar Oil Filter Adapter
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.
Source record 10228142 at NHTSANHTSA communication ID: 10228112
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 6.7L Diagnostic And System Improvements This bulletin involves reprogramming the Engine Control Module/Powertrain Control Module (ECM/PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) Illumination. Upon further investigation, a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: · **P218F - Reductant No Flow Detected. · P242F - Diesel Particulate Filter Restriction - Ash Accumulation. · P2281 - Air Leak Between MAF And Throttle Body.** · P205E - (Diesel Exhaust Fluid) Reductant Tank Temperature Sensor Circuit Intermittent (setting when the block heater is plugged in). · U110E - Lost Ambient Temperature Message. · P20E8 - (Diesel Exhaust Fluid) Reductant Pressure Too Low. · P1477 - Intake Air Diverter Valve Position Sensor Circuit Shorted To Ground. · U3017 - Control Module Timer/Clock Performance. · P0087 - Fuel Rail Pressure Too Low. · P0544 - Exhaust Gas Temperature Sensor Circuit - Sensor 1/1. · P0128 - Thermostat Rationality. In cold ambient temperatures. · P214D - SCR NOx Catalyst Outlet Temperature Too High During Particulate Filter Regeneration. · P24A5 - Exhaust Gas Recirculation (EGR) Cooler Bypass Bank 1 Control Stuck. · P040B - Exhaust Gas Recirculation Temperature Sensor ?A? Circuit Performance. · U1421 - Implausible Ignition Key Off Time Received. · P0420 - Catalyst Efficiency Below Threshold. · P026B - Injection Timing Performance. · P04DB - Crankcase Ventilation System Disconnected. · P1C55 - NOx Sensor Intermittent - Bank 1 Sensor 1. · P202E - Diesel Exhaust Fluid (DEF) Reductant Injector Performance. · P20EE - SCR NOx Catalyst Efficiency Below Threshold - Bank 1. · P2002 - Diesel Particulate Filter Efficiency Below Threshold. · P0604 - Internal Control Module RAM. · P1451 - Diesel Particulate Filter System Performance.
Source components: BACK OVER PREVENTION · ELECTRICAL SYSTEM · ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC) · EXTERIOR LIGHTING · FUEL SYSTEM, DIESEL · FUEL SYSTEM, GASOLINE · POWER TRAIN · SERVICE BRAKES, HYDRAULIC.
Source record 10228112 at NHTSANHTSA communication ID: 10140226
NHTSA source summary · Original PDF not reviewed by Recallfolio
You have been identified as either having stock, or have stock in transit to your dealership. As per regulatory compliance: Please return follow ing stock of part numbers: 82214711, 82214712, 82214713, 82214714, 82214715, 82214716, 82214717, 82214718, 82214720, 82214721, 82214722, 82214723, 82214724, 82214725, 82214726, 82214727, 82214728, 82214729, 82214730, 82214731, 82214732. Please return parts back to your facing depot using Return Code 02, before 31May, 2016.
Source components: EQUIPMENT.
Source record 10140226 at NHTSANHTSA communication ID: 10218303
NHTSA source summary · Original PDF not reviewed by Recallfolio
RES / RHA / REB radio that supports Bluetooth and Hands-Free For issues with Bluetooth, Hands-Free Calling, and/or Voice Commands, DO NOT replace the radio. Diagnose the Hands-Free Module system (also called the Telematics Module). The Telematics Module (and associated components) is the system responsible for these features. A power cycle may be required for the hands-free module for proper diagnosis.~ Please reference; 8T - Navigation/Telecommunication Diagnosis and Testing (DIAGNOSIS AND TESTING - HANDS FREE PHONE)
Source components: ELECTRICAL SYSTEM · EQUIPMENT · EQUIPMENT:ELECTRICAL.
Source record 10218303 at NHTSANHTSA communication ID: 10140254
NHTSA source summary · Original PDF not reviewed by Recallfolio
RES / RHA / REB radio that supports Bluetooth and Hands-Free For issues with Bluetooth, Hands-Free Calling, and/or Voice Commands, DO NOT replace the radio. Diagnose the Hands-Free Module system (also called the Telematics Module). The Telematics Module (and associated components) is the system responsible for these features. A power cycle may be required for the hands-free module for proper diagnosis.~ Please reference; 8T - Navigation/Telecommunication Diagnosis and Testing (DIAGNOSIS AND TESTING - HANDS FREE PHONE)
Source components: ELECTRICAL SYSTEM · EQUIPMENT · EQUIPMENT:ELECTRICAL · EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM) · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10140254 at NHTSANHTSA communication ID: 10140249
NHTSA source summary · Original PDF not reviewed by Recallfolio
You have been identified as either having stock, or have stock in transit to your dealership. Please return all stock of part number 68288760AA. Replacement part number is 68288760AB. Replacement parts w ill be available w eek ending 5/6/16. Please return suspect parts back to your facing depot using Return Code 02, before 26 May, 2016. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
Source components: EQUIPMENT.
Source record 10140249 at NHTSANHTSA communication ID: 10140248
NHTSA source summary · Original PDF not reviewed by Recallfolio
You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part numbers: 68003062AB, 68003083AB, 68003085AB. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 24 May, 2016. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
Source components: EQUIPMENT.
Source record 10140248 at NHTSANHTSA communication ID: 10140227
NHTSA source summary · Original PDF not reviewed by Recallfolio
You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part numbers: 1PE001W 7AB, 1PE011W 7AB. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 24 May, 2016. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
Source components: EQUIPMENT.
Source record 10140227 at NHTSANHTSA communication ID: 10219794
NHTSA source summary · Original PDF not reviewed by Recallfolio
RA3 RA4 Radio Enhancements This bulletin involves inspecting and updating the radio software, if required. **Improvements: · Ability to communicate with Siri via UConnect. · Ability to press Voice Recognition (VR) button for more than one second.** A customer may experience one or more of the following conditions: · **Poor or no connection to cellular network (U.S. market only). · HVAC temperature out of sync with radio display (KL vehicles).** · Track names may be displayed twice in USB or SD media modes. · SD, USB or BTSA modes may become non-functional for a given ignition cycle. · Duplicate song titles may be displayed in USB mode. · Last track is displayed but next track is being played. · Navigation function may resets itself after using One-Shot VR. · Intermittently the Global Positioning System (GPS) may lose its location for a short time and causes routing and positioning concerns. · GPS and Internal cellular device may become inoperative and causes a loss of GPS and cellular functions. · A false Pop-up message may appear ?Vehicle Phone Requires Service? even though the vehicle?s phone works properly. · Back-up camera image may be unclear or jittery/stutters at times. · Enables Via Mobile software features when released to consumers (U.S. market only). · Able to adjust audio balance / fade settings during a VR session. · Correct condition where user could not exit screen off mode. · Mute button status was not being displayed correctly. · Presets where not shown correctly or were deleted. · Enhancements to POI. · ParkSense tone continuously on. · Radio display may shows ?Please insert USB Stick?. · Enhancement made when video is display in radio when using PAL format video disks. · Corrected the temperature slider bar not updating on Manual Temperature Control vehicles. · Navigation may not start or may lose position. · Rear camera may show a black screen for 3 seconds upon going to rev
Source components: ELECTRICAL SYSTEM · EQUIPMENT · EQUIPMENT:ELECTRICAL:INFOTAINMENT.
Source record 10219794 at NHTSANHTSA communication ID: 10138978
NHTSA source summary · Original PDF not reviewed by Recallfolio
RA3 RA4 Radio Enhancements This bulletin involves inspecting and updating the radio software, if required. Improvements: · Ability to communicate with Siri via UConnect. · Ability to press Voice Recognition (VR) button for more than one second.** A customer may experience one or more of the following conditions: · Poor or no connection to cellular network (U.S. market only). HVAC temperature out of sync with radio display (KL vehicles). Track names may be displayed twice in USB or SD media modes. · SD, USB or BTSA modes may become non-functional for a given ignition cycle. Duplicate song titles may be displayed in USB mode. Last track is displayed but next track is being played. · Navigation function may resets itself after using One-Shot VR. Intermittently the Global Positioning System (GPS) may lose its location for a short time and causes routing and positioning concerns. · GPS and Internal cellular device may become inoperative and causes a loss of GPS and cellular functions. · A false Pop-up message may appear Vehicle Phone Requires Service even though the vehicle?s phone works properly. · Back-up camera image may be unclear or jittery/stutters at times. · Enables Via Mobile software features when released to consumers (U.S. market only). · Able to adjust audio balance / fade settings during a VR session. · Correct condition where user could not exit screen off mode. · Mute button status was not being displayed correctly. · Presets where not shown correctly or were deleted. · Enhancements to POI. · ParkSense tone continuously on. · Enhancement to navigation routing. · Radio display may shows ?Please insert USB Stick?. · Enhancement made when video is display in radio when using PAL format video disks. · Corrected the temperature slider bar not updating on Manual Temperature Control vehicles. · Navigation may not start or may lose position. · Rear camera may show a black screen for 3 seconds upon going to rev
Source components: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA · ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10138978 at NHTSANHTSA communication ID: 10076511
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUBJECT: RA3 RA4 Radio Enhancements OVERVIEW: This bulletin involves inspecting and updating the radio software, if required. SYMPTOM/CONDITION: **Improvements: · Ability to communicate with Siri via UConnect. · Ability to press Voice Recognition (VR) button for more than one second.**
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10076511 at NHTSANHTSA communication ID: 10224659
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Bulletin involves updating the (ASCM) software.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10224659 at NHTSANHTSA communication ID: 10139959
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Air Suspension Control Module (ASCM) System Enhancements This Bulletin involves updating the (ASCM) software. A customer may describe the following: · **Cluster stays awake after ignition is turned off for 10 minutes or more.** · False message Battery Voltage Low - Start Engine to Change Ride Height which appears in the Electronic Vehicle Information Center (EVIC). This condition may happen when the vehicle is first started and trying to move the suspension from trailer ride height to normal ride height.
Source components: SUSPENSION.
Source record 10139959 at NHTSANHTSA communication ID: 10076503
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUBJECT: Flash: Air Suspension Control Module (ASCM) System Enhancements SYMPTOM/CONDITION: A customer may describe the following: · **Cluster stays awake after ignition is turned off for 10 minutes or more.** · False message Battery Voltage Low - Start Engine to Change Ride Height which appears in the Electronic Vehicle Information Center (EVIC). This condition may happen when the vehicle is first started and trying to move the suspension from trailer ride height to normal ride height.
Source components: ELECTRICAL SYSTEM:SOFTWARE · SUSPENSION:REAR:SPRINGS:AIR SUSPENSION SYSTEM.
Source record 10076503 at NHTSANHTSA communication ID: 10076282
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUBJECT: Flash: Air Suspension Control Module (ASCM) System Enhancements OVERVIEW: This Bulletin involves updating the (ASCM) software. SYMPTOM/CONDITION: A customer may describe the following: **Cluster stays awake after ignition is turned off for 10 minutes or more.** False message Battery Voltage Low - Start Engine to Change Ride Height which appears in the Electronic Vehicle Information Center (EVIC). This condition may happen when the vehicle is first started and trying to move the suspension from trailer ride height to normal ride height.
Source components: ELECTRICAL SYSTEM:SOFTWARE · SUSPENSION:FRONT:SPRINGS:AIR SUSPENSION SYSTEM.
Source record 10076282 at NHTSANHTSA communication ID: 10139956
NHTSA source summary · Original PDF not reviewed by Recallfolio
Adaptive Cruise Control Sensor 1) If you are replacing this part due to the cluster displaying Clean Radar Sensor in Front of Vehicle or DTC C1266 ACC Sensor Blinded, please verify that there is no blockage in front of the sensor. Blockage can occur from mud, ice, snow, front end damage, bracket damage, the sensor not attached to the bracket properly or an aftermarket fascia installed. This fault can occur intermittently in muddy or icy/snowy conditions and is considered normal operation. Under some circumstances, a misaligned sensor can also cause the C1266 DTC, please complete an alignment procedure. No replacement is required.~ 2) If you are replacing this part due to the cluster displaying ?ACC/FCW Unavailable Service Required?, please check the DTC fault codes. This will indicate which module needs to be serviced (TCM, PCM, ESP/ABS, etc). This fault is not due to the ACC Sensor. No sensor replacement is required.~ 3) If you have fault code DTC C125E ACC Sensor Adjustment Required, please verify that the radar sensor is fully seated in the clips and there is no damage (if clips are damaged on a 2013 or earlier vehicle, order P/N 68085813A$, otherwise please replace the module), please verify there is no blockage to the sensor due to mud, ice, snow, front end damage, bracket damage or the sensor not attached to the bracket properly. Perform the Vertical Alignment and the Electronic Horizontal Alignments procedure as stated in the service manual. Please note, if the horizontal alignment procedure will not complete, check the vertical alignment and confirm that the sensor is seated properly. Rerun the horizontal alignment procedure. No sensor replacement is required. **Hints for running Horizontal Alignment procedure: A) Verify speed is between 45 and 75 mph, B) verify the road is relatively straight with signs, poles, guard rails, etc C) Do not tail a vehicle too closely this inhibits the learning procedure
Source components: VEHICLE SPEED CONTROL:CRUISE CONTROL.
Source record 10139956 at NHTSANHTSA communication ID: 10218068
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin involves replacing the engine assembly.
Source components: ENGINE AND ENGINE COOLING.
Source record 10218068 at NHTSANHTSA communication ID: 10215102
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin involves replacing the engine assembly.
Source components: ENGINE AND ENGINE COOLING:ENGINE.
Source record 10215102 at NHTSANHTSA communication ID: 10138953
NHTSA source summary · Original PDF not reviewed by Recallfolio
Cummins Service Engine Replacement This bulletin involves replacing the engine assembly. Remanufactured long block or short block was installed during a prior repair. A new replacement engine will be installed.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.
Source record 10138953 at NHTSANHTSA communication ID: 10140211
NHTSA source summary · Original PDF not reviewed by Recallfolio
Inspect and Return: Latch Seat, and Latch Seat Back You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of following part numbers: 68050625AA, 68050626AA, 68050627AA, 68050628AA, 68050743AA, 68050744AA, 68050839AA, 68050841AA, 68257133AA, 68257134AA, 68264578AA, 68264579AA, 68264580AA, 68264581AA. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 12 April, 2016. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
Source components: LATCHES/LOCKS/LINKAGES · SEATS.
Source record 10140211 at NHTSANHTSA communication ID: 10142203
NHTSA source summary · Original PDF not reviewed by Recallfolio
RE2 RE6 RB5 RB6 Radio Software Enhancements This bulletin involves updating the radio software and navigation if equipped. A customer may experience one or more of the following conditions: · Radio display screen will lock up and reset intermittently. · Incorrect routing directions to fuel stations when using Travel Link. · Unable to turn on heated seats; icon is greyed out. · Navigation screen goes blank. · Navigation system freezes/locks up. · Vehicles with Mopar special edition radio will update radio?s splash screen. · Navigation icon shows the vehicle going backward when it?s moving forward.
Source components: ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT · EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM) · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10142203 at NHTSANHTSA communication ID: 10140234
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 2.4L Powertrain Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination or one or more of the following conditions. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory:
Source components: ELECTRICAL SYSTEM · EXTERIOR LIGHTING.
Source record 10140234 at NHTSANHTSA communication ID: 10140228
NHTSA source summary · Original PDF not reviewed by Recallfolio
Turn Signal, Outside Rearview Mirror The Turn Signal in the outside rearview mirror has been revised. Ensure it visually matches the Turn Signal on the opposite mirror. If not, both sides will need to be replaced.
Source components: VISIBILITY.
Source record 10140228 at NHTSANHTSA communication ID: 10139827
NHTSA source summary · Original PDF not reviewed by Recallfolio
Auxiliary Lamp, Outside Mirror The Auxiliary Lamp (Puddle Lamp) in the outside rearview mirror has been revised. Ensure it visually matches the Puddle Light on the opposite mirror. If not, both sides will need to be replaced
Source components: VISIBILITY:REARVIEW MIRRORS/DEVICES.
Source record 10139827 at NHTSANHTSA communication ID: 10139826
NHTSA source summary · Original PDF not reviewed by Recallfolio
Mirror, Outside Rearview Replacement outside rearview mirror assembly comes equipped with Turn Signal and Auxiliary (Puddle) Light. If Turn Signal/Puddle Lamp is visually different from OE, you will need to swap the original lamp to the new mirror unit.
Source components: EXTERIOR LIGHTING:TURN SIGNAL.
Source record 10139826 at NHTSANHTSA communication ID: 10141316
NHTSA source summary · Original PDF not reviewed by Recallfolio
Cummins Service Engine Replacement This bulletin involves replacing the engine assembly. Remanufactured long block or short block was installed during a prior repair. A new replacement engine will be installed.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10141316 at NHTSANHTSA communication ID: 10141310
NHTSA source summary · Original PDF not reviewed by Recallfolio
Bumper Kit If you are ordering a Center Console bumper kit to repair a vehicle for TSB 23-001- 16 or RRT 16-011 and you receive kit PN 68315574AA, discard the instruction sheet shipped with the kit and reference TSB 23-001-16 REV. B for correct bumper installation instructions. ~ Note: This only applies to the AA level of the kit
Source components: EQUIPMENT.
Source record 10141310 at NHTSANHTSA communication ID: 10121927
NHTSA source summary · Original PDF not reviewed by Recallfolio
NAG1 (5A580) Valve Body As per Warranty Bulletin D-13-22, please use R2108213A$ valve body for all Warranty (W), Mopar (M) and Mopar Vehicle Protection (F) claims.~ Assembly also includes Filter (52108325AA) and Gasket (52108332AA).~
Source components: ENGINE AND ENGINE COOLING.
Source record 10121927 at NHTSANHTSA communication ID: 10119646
NHTSA source summary · Original PDF not reviewed by Recallfolio
FLOOR CONSOLE ASSEMBLY Please call Mike Wicker on cell (248) 821-9350 regarding Center Floor Console Armrest Lid not latching properly. If you don't receive a response within 20 minutes, then continue with normal repair procedure.~ Please follow this procedure to resolve Center Floor Console noise (e.g. ticking, buzz, squeak, rattle):~ 1) Remove tape/film from the Center Floor Console latching surfaces within the Armrest Lid {upper compartment} & bezel and Storage Bin {lower compartment} latch & bezel surfaces).~ 2) Apply interior cleaner onto cloth to remove the tape/film adhesive from the plastic latch & bezel and Storage Bin & Armrest Lid contact surfaces.~ Verify problem is resolved.
Source components: EQUIPMENT.
Source record 10119646 at NHTSANHTSA communication ID: 10119653
NHTSA source summary · Original PDF not reviewed by Recallfolio
Engine Mounts Replacement This bulletin involves replacing the right and left engine mounts. The customer may describe a drone/noise or excessive vibration condition when the engine is operating in ECO mode.
Source components: ENGINE.
Source record 10119653 at NHTSANHTSA communication ID: 10160075
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Powertrain System Improvements/Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. The following powertrain system improvements/enhancements are included in this software release. These enhancements are listed by vehicle application. DS vehicles equipped with a 3.6L engine (sales code ERB). * Enhanced Automatic Oil Change Indicator (EAOCI) system improvements to switch to a severe duty cycle algorithm anytime the PCM is replaced to ensure the customer receives a timely oil change required message. * Corrected a generic scan tool display issue regarding Mode 6 data accuracy. DS vehicles equipped with a 5.7L engine (sales code EZH). * System improvements to prevent Malfunction Indicator Lamp (MIL) illumination with a Diagnostic Trouble Code (DTC) P0300 - Multiple Cylinder Misfire when using a block heater in ambient temperatures greater than -20°F (-29°C). * Enhanced Automatic Oil Change Indicator (EAOCI) system improvements to switch to a severe duty cycle algorithm anytime the PCM is replaced to ensure the customer receives a timely oil change required message. * Corrected a generic scan tool display issue regarding Mode 6 data accuracy. DJ, DD, and D2 vehicles equipped with a 5.7L engine (sales code EZC or EZF). * U0140 - Lost Communication With Body Control Module (attempting to clear this DTC will be unsuccessful). * Transmission torque management enhancement when shifting from drive to reverse. * Software to correct Malfunction Indicator Lamp (MIL) illumination with Diagnostic Trouble Code (DTC) P0481 - Cooling Fan 2 Control Circuit/Open setting in the PCM memory. * Enhanced Automatic Oil Change Indicator (EAOCI) system improvements to switch to a severe duty cycle algorithm anytime the PCM is replaced to ensure the customer receives a timely oil change required message. * Corrected a generic scan tool display issue regarding Mode 6 data accuracy. * Improved tran
Source components: POWER TRAIN.
Source record 10160075 at NHTSANHTSA communication ID: 10160059
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Incorrect Language Displayed In The Cluster And Odometer Line Disappears This bulletin involves reprogramming the Instrument Panel Cluster (IPC) with updated software. ? Customer may report that the odometer line disappears sometimes and comes back with an ignition cycle or changing cluster screens. ? The customer may notice when trying to switch the language from English to Spanish/French, only the radio will display the correct language. The cluster will still display English.
Source components: ELECTRICAL SYSTEM.
Source record 10160059 at NHTSANHTSA communication ID: 10160041
NHTSA source summary · Original PDF not reviewed by Recallfolio
Air Suspension Compressor Inoperative This bulletin involves replacing the Air Suspension Compressor Assembly. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find the following Diagnostic Trouble Code may have been set: ? C1556-14-Ride Height Air Pressure Sensor - Circuit Short To Ground Or Open In addition to the DTC listed above, customers may also experience one or more of the following conditions: ? Auto Level Rear Air Suspension does not operate.
Source components: SUSPENSION.
Source record 10160041 at NHTSANHTSA communication ID: 10218012
NHTSA source summary · Original PDF not reviewed by Recallfolio
Anti Lock Brake (ABS) Module System Enhancements.
Source components: ELECTRICAL SYSTEM · PARKING BRAKE:ELECTRICAL:CONTROL MODULE:SOFTWARE · SEAT BELTS.
Source record 10218012 at NHTSANHTSA communication ID: 10215046
NHTSA source summary · Original PDF not reviewed by Recallfolio
Anti Lock Brake (ABS) Module System Enhancements.
Source components: SERVICE BRAKES, AIR:ANTILOCK:CONTROL UNIT/MODULE.
Source record 10215046 at NHTSANHTSA communication ID: 10160034
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Anti Lock Brake (ABS) Module System Enhancements This bulletin involves updating the Anit-Lock Brake System (ABS) module software. The customer may describe the Electronic Stability Control (ESC) Warning lamp is illuminated on the instrument cluster. Upon further inspection, the technician may find the following Diagnostic Trouble Code (DTC): C006A-49 - Multi-Axis Acceleration Sensor - Internal Electronic Failure.
Source components: ELECTRICAL SYSTEM · ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC) · SERVICE BRAKES.
Source record 10160034 at NHTSANHTSA communication ID: 10160026
NHTSA source summary · Original PDF not reviewed by Recallfolio
Vibration During Quick Launch While Towing This bulletin involves replacing the rear prop shaft, if required. The customer may describe a vibration feeling during a fast launch from 0 mph (0 kph) to 11 mph (18 kph) and the vehicle hauling a heavy load. This vibration is most noticeable at a launch from a stop, at Wide Open Throttle (WOT) while towing a heavy trailer.
Source components: POWER TRAIN.
Source record 10160026 at NHTSANHTSA communication ID: 10218070
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin involves replacing the Air Suspension Compressor Assembly.
Source components: ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC) · SUSPENSION.
Source record 10218070 at NHTSANHTSA communication ID: 10215104
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin involves replacing the Air Suspension Compressor Assembly.
Source components: ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC) · EQUIPMENT ADAPTIVE/MOBILITY · SUSPENSION.
Source record 10215104 at NHTSANHTSA communication ID: 10159962
NHTSA source summary · Original PDF not reviewed by Recallfolio
P20EE SCR NOX Catalyst Efficiency Below Threshold Bank 1 This bulletin involves verifying the proper operation of the Diesel Exhaust Fluid (DEF) system and, if necessary, replacing the Selective Catalyst Reduction (SCR) Catalyst assembly. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find Diagnostic Trouble Code (DTC) P20EE SCR NOX Catalyst Efficiency Below Threshold Bank 1 set in the Powertrain Control Module (PCM) memory.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.
Source record 10159962 at NHTSANHTSA communication ID: 10159935
NHTSA source summary · Original PDF not reviewed by Recallfolio
RA1 Radio Enhancements This bulletin involves updating the software on the RA1 Radio. A customer may experience, one or more of the following conditions: ? Radio may reset, turn itself off and then back on again. All Symptom Listed Below Are For 2013 Vehicles Only: ? Radio may be muted. Any of DTCs B1400-92-Front Left Audio Speaker Output - Performance Incorrect Operation and/or B1404-92- Front Right Audio Speaker Output - Performance Incorrect Operation and/or B1408-92-Rear Left Audio Speaker Output - Performance Incorrect Operation and/or B140C-92-Rear Right Audio Speaker Output - Performance Incorrect Operation, maybe active or stored. ? Radio display screen may turn off. ? Radio will stay on after the vehicle is turned off with remote. (Applies to vehicle with Mopar remote start add on package only). ? Radio will stay on for 20 minutes after ignition is turned off and the only way to turn off the radio is by pressing the power button on the radio. Software was updated to have the radio shut off based on the cluster accessory delay setting.
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10159935 at NHTSANHTSA communication ID: 10218060
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin involves configuring the Body Control Module (BCM).
Source components: ELECTRICAL SYSTEM.
Source record 10218060 at NHTSANHTSA communication ID: 10215094
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin involves configuring the Body Control Module (BCM).
Source components: ELECTRICAL SYSTEM · EQUIPMENT · STRUCTURE.
Source record 10215094 at NHTSANHTSA communication ID: 10159925
NHTSA source summary · Original PDF not reviewed by Recallfolio
LED Lamp Configuration Update This bulletin involves configuring the Body Control Module (BCM). The customer may describe LED Turn Signals do not properly display.
Source components: ELECTRICAL SYSTEM.
Source record 10159925 at NHTSANHTSA communication ID: 10159918
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 6.7L Diagnostic And System Improvements This bulletin involves reprogramming the Engine Control Module/Powertrain Control Module (ECM/PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) Illumination. Upon further investigation, a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: ? P205E - (Diesel Exhaust Fluid) Reductant Tank Temperature Sensor Circuit Intermittent (setting when the block heater is plugged in). ? U110E - Lost Ambient Temperature Message. ? P20E8 - (Diesel Exhaust Fluid) Reductant Pressure Too Low. ? P2281 - Air Leak Between MAF And Throttle Body. ? P1477 - Intake Air Diverter Valve Position Sensor Circuit Shorted To Ground. ? U3017 - Control Module Timer/Clock Performance. ? P0087 - Fuel Rail Pressure Too Low. ? P0544 - Exhaust Gas Temperature Sensor Circuit - Sensor 1/1. ? P0128 - Thermostat Rationality. In cold ambient temperatures. ? P214D - SCR NOx Catalyst Outlet Temperature Too High During Particulate Filter Regeneration. ? P24A5 - EGR Cooler Bypass Bank 1 Control Stuck. ? P040B - Exhaust Gas Recirculation Temperature Sensor ?A? Circuit Performance. ? U1421 - Implausible Ignition Key Off Time Received. ? P0420 - Catalyst Efficiency Below Threshold. ? P026B - Injection Timing Performance. ? P04DB - Crankcase Ventilation System Disconnected. ? P1C55 - NOx Sensor Intermittent - Bank 1 Sensor 1. ? P202E - Diesel Exhaust Fluid (DEF) Reductant Injector Performance. ? P20EE - SCR NOx Catalyst Efficiency Below Threshold - Bank 1. ? P2002 - Diesel Particulate Filter Efficiency Below Threshold. ? P0604 - Internal Control Module RAM. ? P1451 - Diesel Particulate Filter System Performance. In addition to the above symptoms, the following software improvements are also included in this update: The Following DTCs Have Been Changed From A One Trip Fault To A Two Trip Fault: ? P0201 - P0206 - Fuel injector
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING:ENGINE:DIESEL · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
Source record 10159918 at NHTSANHTSA communication ID: 10218058
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin involves reprogramming the Vehicle System Interface Module (VSIM) with the
Source components: ELECTRICAL SYSTEM.
Source record 10218058 at NHTSANHTSA communication ID: 10215092
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin involves reprogramming the Vehicle System Interface Module (VSIM) with the
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10215092 at NHTSA