The manufacturer’s record · Page 2 of 8
Original record summaries, dates and identifiers for this model-year. Records 101–200 of 743, ordered newest first. Dated records on this page: Mar 4, 2020–Aug 9, 2022.
Back to 2015 Mazda MAZDA3 problems & recallsThis archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
NHTSA communication ID: 10218720
NHTSA source summary · Original PDF not reviewed by Recallfolio
Use the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns.
Source components: ELECTRICAL SYSTEM.
Source record 10218720 at NHTSANHTSA communication ID: 10218719
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may complain that their liftgate does not open. This can mean a range of things, from the liftgate not unlatching to the power liftgate (PLG) not opening automatically. If you confirm that the customer's concern is that the liftgate does not unlatch correctly, follow the repair information below
Source components: LATCHES/LOCKS/LINKAGES.
Source record 10218719 at NHTSANHTSA communication ID: 10217209
NHTSA source summary · Original PDF not reviewed by Recallfolio
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer.
Source components: ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER.
Source record 10217209 at NHTSANHTSA communication ID: 10215274
NHTSA source summary · Original PDF not reviewed by Recallfolio
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.
Source components: ELECTRICAL SYSTEM.
Source record 10215274 at NHTSANHTSA communication ID: 10215250
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may complain about infotainment center display: Ghost touch, surface peeling, spider cracks. Repair kits are available to replace just the screen. There is no need to replace the entire infotainment display unit.
Source components: EQUIPMENT · EQUIPMENT:ELECTRICAL:INFOTAINMENT.
Source record 10215250 at NHTSANHTSA communication ID: 10215244
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may complain about scratches on the instrument cluster lens.
Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL · EQUIPMENT · UNKNOWN OR OTHER.
Source record 10215244 at NHTSANHTSA communication ID: 10215238
NHTSA source summary · Original PDF not reviewed by Recallfolio
Service part Automatic Transaxles (ATX) manufactured on or after July, 2018 are shipped with a blank TCM that requires configuration.
Source components: POWER TRAIN · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM) · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE.
Source record 10215238 at NHTSANHTSA communication ID: 10213201
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 74.00.311 or later).
Source components: ELECTRICAL SYSTEM.
Source record 10213201 at NHTSANHTSA communication ID: 10213185
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
Source components: SUSPENSION.
Source record 10213185 at NHTSANHTSA communication ID: 10213121
NHTSA source summary · Original PDF not reviewed by Recallfolio
Use the symptom troubleshooting tables to diagnose MAZDA CONNECT concerns.
Source components: COMMUNICATION:MANUFACTURER TELEMATICS · ELECTRICAL SYSTEM · EQUIPMENT:ELECTRICAL:INFOTAINMENT · UNKNOWN OR OTHER.
Source record 10213121 at NHTSANHTSA communication ID: 10213128
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may experience a continuous infotainment reboot in or near Seattle Washington and troubleshooting is not possible due to continuous reboot.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:ELECTRICAL:INFOTAINMENT.
Source record 10213128 at NHTSANHTSA communication ID: 10210887
NHTSA source summary · Original PDF not reviewed by Recallfolio
Apple CarPlay / Android Auto Frequently Asked Questions (FAQs)
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10210887 at NHTSANHTSA communication ID: 10210902
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may complain that the steering wheel is off center more than 3ð even when driving straight on a flat road.
Source components: STEERING.
Source record 10210902 at NHTSANHTSA communication ID: 10210847
NHTSA source summary · Original PDF not reviewed by Recallfolio
There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method B. Auxiliary Key Code Cut Method
Source components: EQUIPMENT.
Source record 10210847 at NHTSANHTSA communication ID: 10210842
NHTSA source summary · Original PDF not reviewed by Recallfolio
Use the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns.
Source components: ELECTRICAL SYSTEM.
Source record 10210842 at NHTSANHTSA communication ID: 10209761
NHTSA source summary · Original PDF not reviewed by Recallfolio
Accessory instructions can be found on OneMazda under Dealer Resources - Parts & Accessories.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10209761 at NHTSANHTSA communication ID: 10209778
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Mazda DCA-8000 is required for all warranty battery testing. If the Mazda DCA-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10209778 at NHTSANHTSA communication ID: 10209746
NHTSA source summary · Original PDF not reviewed by Recallfolio
Use the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10209746 at NHTSANHTSA communication ID: 10209752
NHTSA source summary · Original PDF not reviewed by Recallfolio
There have been warranty claims submitted for growling or bearing whine noise in differentials, transfer units and transmissions where the source of the noise was a wheel bearing. This misdiagnosis can lead to multiple repair attempts, warranty debits, and additional inconvenience and/or cost to the customer. To reduce the chance of this occurring, please follow the steps outlined in the repair procedure.
Source components: EQUIPMENT:MECHANICAL · POWER TRAIN · WHEELS.
Source record 10209752 at NHTSANHTSA communication ID: 10208564
NHTSA source summary · Original PDF not reviewed by Recallfolio
There have been warranty claims submitted for growling or bearing whine noise in differentials, transfer units and transmissions where the source of the noise was a wheel bearing. This misdiagnosis can lead to multiple repair attempts, warranty debits, and additional inconvenience and/or cost to the customer. To reduce the chance of this occurring, please follow the steps outlined in the repair procedure.
Source components: POWER TRAIN · SUSPENSION:FRONT:WHEEL BEARING.
Source record 10208564 at NHTSANHTSA communication ID: 10208556
NHTSA source summary · Original PDF not reviewed by Recallfolio
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN · SERVICE BRAKES, HYDRAULIC · STEERING.
Source record 10208556 at NHTSANHTSA communication ID: 10208558
NHTSA source summary · Original PDF not reviewed by Recallfolio
Use the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns.
Source components: ELECTRICAL SYSTEM.
Source record 10208558 at NHTSANHTSA communication ID: 10208567
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
Source components: STRUCTURE.
Source record 10208567 at NHTSANHTSA communication ID: 10208563
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may experience a continuous infotainment reboot in or near Seattle Washington. Mazda is aware of the issue and is working on a resolution. This Service Alert will be updated with the newest repair information as it becomes available.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:ELECTRICAL:INFOTAINMENT.
Source record 10208563 at NHTSANHTSA communication ID: 10208554
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may report concerns with interior upholstery surface stains particularly on high contact areas (e.g.: steering wheel, door panels, shifter...etc.). This may be caused by skin oils or chemicals such as hand lotions. Use a clean towel damped in leather/vinyl cleaner or mild soap to clean the steering wheel. NOTE: Upholstery maintenance and care information can also be found in the Owner's Manual.
Source components: STRUCTURE · UNKNOWN OR OTHER.
Source record 10208554 at NHTSANHTSA communication ID: 10206938
NHTSA source summary · Original PDF not reviewed by Recallfolio
Symptom troubleshooting tables to diagnose MAZDA CONNECT concerns. No. 1 Blank Screen No. 2. Rear View Camera is not displayed No. 3 Rebooting No. 4 Infotainment System Has No Sound No. 5 Commander Switch Does Not Work No. 6 Bluetooth device will not pair No. 7 Incorrect GPS position No. 8 Voice Recognition Does Not Work No. 9 Cannot Make a Hands-Free Call No. 10 Cannot Play Bluetooth Audio No. 11 Other Symptoms No. 12 How to update the Navigation SD Card Map No. 13 How to Check Navi SD Card VIN Lock
Source components: BACK OVER PREVENTION · ELECTRICAL SYSTEM · ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT.
Source record 10206938 at NHTSANHTSA communication ID: 10205997
NHTSA source summary · Original PDF not reviewed by Recallfolio
i-ELOOP Battery Service Information: This service information provides basic Q-85/T-110 battery handling procedures. Complete service information can be found in MGSS online or Workshop Manual (section 13-17).
Source components: ELECTRICAL SYSTEM.
Source record 10205997 at NHTSANHTSA communication ID: 10205994
NHTSA source summary · Original PDF not reviewed by Recallfolio
Battery Maintenance: This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.
Source components: ELECTRICAL SYSTEM.
Source record 10205994 at NHTSANHTSA communication ID: 10203768
NHTSA source summary · Original PDF not reviewed by Recallfolio
MAZDA CONNECT SYMPTOM TROUBLESHOOTING [6TH GENERATION VEHICLES]. Use the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10203768 at NHTSANHTSA communication ID: 10203728
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may complain that the rear door seaming welt (1) comes off when stepping in and/or out of the vehicle. This is caused by the gripping force of the seaming welt being insufficient for frequent usage of the rear seat (vehicle used for ride sharing). No mass production change is planned.
Source components: STRUCTURE.
Source record 10203728 at NHTSANHTSA communication ID: 10203759
NHTSA source summary · Original PDF not reviewed by Recallfolio
For improvement of electrical diagnosis, the SKYACTIVî Wiring Terminal Test Kits has been delivered all the dealers. The terminal test kit enables you: To check pin fit drag of all PCM terminals used in SKYACTIVî vehicles and compare suspect terminal drag with a good know terminal.To measure the voltage/resistance avoiding any terminal damage.
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10203759 at NHTSANHTSA communication ID: 10202695
NHTSA source summary · Original PDF not reviewed by Recallfolio
Ethanol is becoming a common additive in gasoline. Gasoline containing ethanol is likely available at your local gasoline station. Typical blends of ethanol include E10 and E85. E10: A blend of 10% ethanol and 90% gasoline. E85: A blend of 85% ethanol and 15% gasoline All Mazda vehicles can run on gasoline containing up to 10% ethanol (E10) but only some 1999-2001 B3000 trucks can run on gasoline with more than 10% ethanol blended. E10 compatible vehicles: All Mazda vehicles. E85 compatible vehicles: 1999-2001 B3000 Mazda trucks with the 8th VIN digit is V.
Source components: FUEL SYSTEM, GASOLINE · FUEL SYSTEM, OTHER.
Source record 10202695 at NHTSANHTSA communication ID: 10201864
NHTSA source summary · Original PDF not reviewed by Recallfolio
MAZDA CONNECT SYMPTOM TROUBLESHOOTING [6TH GENERATION VEHICLES]. Use the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns.
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10201864 at NHTSANHTSA communication ID: 10201777
NHTSA source summary · Original PDF not reviewed by Recallfolio
Ethanol is becoming a common additive in gasoline. Gasoline containing ethanol is likely available at your local gasoline station. Typical blends of ethanol include E10 and E85. E10: A blend of 10% ethanol and 90% gasoline, E85: A blend of 85% ethanol and 15% gasoline, All Mazda vehicles can run on gasoline containing up to 10% ethanol (E10) but only some 1999-2001 B3000 trucks can run on gasoline with more than 10% ethanol blended. E10 compatible vehicles: All Mazda vehicles. E85 compatible vehicles: 1999-2001 B3000 Mazda trucks with the 8th VIN digit is V. What if a customer puts E85 in there Mazda vehicle? Symptoms include: Rough Running, Lean Codes, Misfires and/or misfire codes, Lack of power, Poor fuel economy, Spark knock, Mechanical engine damage.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.
Source record 10201777 at NHTSANHTSA communication ID: 10201772
NHTSA source summary · Original PDF not reviewed by Recallfolio
All Mazda Connect vehicles in new car inventory must be updated to the software version listed below in this TSB as part of the New Car Ready Step 3 process. Make sure the new vehicle specialist receives a copy of this bulletin. Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 74.00.230 or later). NOTE: For 2016 CX-9 with version earlier than 59.00.441, the tachometer function will be removed from the Active Driving Display as part of MazdaâÂÂs continuing efforts to improve safety and reduce driver distraction. Please explain this to the customer before updating the software. If the customer agrees, turn off the tachometer display on the AD-Display tab in MAZDA CONNECT Settings before performing the update. NOTE: If the customer has customized MAZDA CONNECT with something like a different background using unauthorized software, make sure they know the following information before updating MAZDA CONNECT to avoid any issues later on. Updating MAZDA CONNECT to the latest version will erase any customization created by unauthorized software. Unauthorized customization software will not work on the latest version of MAZDA CONNECT software. The latest version of MAZDA CONNECT software cannot be rolled back to an earlier version. Mazda does not recommend unauthorized customization of MAZDA CONNECT due to the possibility of unexpected problems. Any issues related to this will not be covered under Mazda warranty policy.
Source components: ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10201772 at NHTSANHTSA communication ID: 10201768
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles may experience the check engine light and automatic transaxle warning light ON with one or more of these DTCs stored in the TCM memory (P0842, P0847, P0872, P0877, P0780, P1738). P0842:00 - Oil pressure switch No. 1 (oil pressure switch B) stuck on, P0847:00 - Oil pressure switch No. 2 (oil pressure switch A) stuck on, P0872:00 - Oil pressure switch No. 3 (oil pressure switch A) stuck on, P0780:00 - Gear shifting malfunction, P1738:00 Automatic transaxle internal malfunction. This is caused by the oil pressure switch A and/or B at the control valve body temporarily or permanently getting stuck due to contamination entering the passage. To correct the problem, some mass production changes have been implemented to reduce contamination and improve the DTC diagnostic logic. NOTE: If the vehicle also has a delayed engagement concern, this TSB is not applicable. Refer to the instructions on MGSS (SLOW ENGAGING AFTER OPERATING SELECTOR LEVER FROM N TO D POSITION [FW6A-EL/FW6AX-EL]) or (SLOW ENGAGING AFTER OPERATING SELECTOR LEVER FROM N TO D POSITION [EW6A-EL/EW6AX-EL]) for proper diagnosis and repair procedure.
Source components: POWER TRAIN.
Source record 10201768 at NHTSANHTSA communication ID: 10201863
NHTSA source summary · Original PDF not reviewed by Recallfolio
MAZDA CONNECT SYMPTOM TROUBLESHOOTING [6TH GENERATION VEHICLES]. Use the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns.
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10201863 at NHTSANHTSA communication ID: 10200933
NHTSA source summary · Original PDF not reviewed by Recallfolio
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY · ENGINE AND ENGINE COOLING.
Source record 10200933 at NHTSANHTSA communication ID: 10200527
NHTSA source summary · Original PDF not reviewed by Recallfolio
This service bulletin provides information regarding the proper use of the driverâÂÂs floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with proper usage.
Source components: EQUIPMENT.
Source record 10200527 at NHTSANHTSA communication ID: 10200940
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may complain about incorrect MAZDA CONNECT clock time. This may be caused by an incorrect clock GPS Sync setting.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).
Source record 10200940 at NHTSANHTSA communication ID: 10200528
NHTSA source summary · Original PDF not reviewed by Recallfolio
AUDIO, NAVIGATION AND PHONE CONCERNS WITH MAZDA CONNECT INFOTAINMENT SYSTEM (6TH GENERATION). All Mazda Connect vehicles in new car inventory must be updated to the software version listed below in this TSB as part of the New Car Ready Step 3 process. Make sure the new vehicle specialist receives a copy of this bulletin. Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 70.00.367 or later). NOTE: For 2016 CX-9 with version earlier than 59.00.441, the tachometer function will be removed from the Active Driving Display as part of Mazdas continuing efforts to improve safety and reduce driver distraction.
Source components: EQUIPMENT:ELECTRICAL:INFOTAINMENT.
Source record 10200528 at NHTSANHTSA communication ID: 10199714
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains or discoloration.
Source components: WHEELS.
Source record 10199714 at NHTSANHTSA communication ID: 10198679
NHTSA source summary · Original PDF not reviewed by Recallfolio
MAZDA CONNECT SYMPTOM TROUBLESHOOTING [6TH GENERATION VEHICLES]. Use the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns.
Source components: ELECTRICAL SYSTEM · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10198679 at NHTSANHTSA communication ID: 10198673
NHTSA source summary · Original PDF not reviewed by Recallfolio
There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method B. Auxiliary Key Code Cut Method A. Auxiliary Key Trace Cut Method If only one auxiliary key is lost/missing, some key cutting machines can trace cut a new key blank. 1. Trace cut the new auxiliary key blank(s). B. Auxiliary Key Code Cut Method If both auxiliary keys are lost/missing, use this method for cutting new auxiliary key blank(s). 1. Confirm you have access to a Mazda approved key cutting machine. See âÂÂMazda Approved Key Cutting Machineâ table.
Source components: EQUIPMENT.
Source record 10198673 at NHTSANHTSA communication ID: 10198689
NHTSA source summary · Original PDF not reviewed by Recallfolio
Accessory instructions can be found on OneMazda under Dealer Resources - Parts & Accessories. The links provided below can be used for quick access: For 2016 models and newer: NOTE: Instructions are found under the "Attachments" section once a part is selected. Accessories E-catalog For models prior to 2016: Accessory Parts and Installation Instructions
Source components: EQUIPMENT.
Source record 10198689 at NHTSANHTSA communication ID: 10198691
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
Source components: VISIBILITY:POWER WINDOW DEVICES AND CONTROLS.
Source record 10198691 at NHTSANHTSA communication ID: 10198677
NHTSA source summary · Original PDF not reviewed by Recallfolio
APPLE CARPLAY / ANDRID AURO FREQUENTLY ASKED QUESTIONS (FAQ) The following vehicles are not equipped with Apple CarPlay / Android Auto, but it can be activated using MDARS. See Activation instructions on MGSS -> Infotainment -> MAZDA CONNECT Updates -> Apple Carplay / Android Auto MDARS Activation Instructions
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10198677 at NHTSANHTSA communication ID: 10198571
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may experience the MAZDA CONNECT rebooting or the screen turning black under any temperature. When the concern occurs, MAZDA CONNECT reboots repeatedly, and if the SD card is removed during this reboot cycle, the rebooting cycle ends. This is caused by some SD cards for the MAZDA CONNECT navigation system being manufactured with improper hardware, resulting in a data reading error. To correct the concern, the SD card hardware has been changed.
Source components: ELECTRICAL SYSTEM · EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10198571 at NHTSANHTSA communication ID: 10198574
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles may experience exterior trim heat damage when parked near a glass building. This may be caused by the suns reflection. If a building creates enough of a curve with a series of flat windows, which act like mirrors, the reflections all converge at one point, focusing and concentrating the light onto the street below.
Source components: VISIBILITY:POWER WINDOW DEVICES AND CONTROLS.
Source record 10198574 at NHTSANHTSA communication ID: 10194887
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles may have one of the following DTCs stored in memory along with a system status notice on the Multi-information display OR display a system status notice with no DTC: C1001:92 - Forward sensing camera (FSC) poor field of view [Gen 6 vehicles], B14F0:92 - General temporary failure in forward sensing camera (FSC) [Gen 7 vehicles build on or before March 2, 2019], No DTC - Gen 7 vehicles built after March 2, 2019, DTC C1001:92 or B14F0:92 set as a past record for low visibility of the Forward Sensing Camera (FSC). It does not mean there is an actual FSC defect. In some cases the customer may have a concern with the Lane Departure Warning System (LDWS) and/or High Beam Control system (HBC). In other cases this DTC might be found without a related customer concern.
Source components: EQUIPMENT ADAPTIVE/MOBILITY · EXTERIOR LIGHTING · FORWARD COLLISION AVOIDANCE · LANE DEPARTURE.
Source record 10194887 at NHTSANHTSA communication ID: 10194891
NHTSA source summary · Original PDF not reviewed by Recallfolio
When performing vehicle services such as control unit software update, control unit registration/activation, CMU log data retrieval, etc., always use the DCA8000 OR GR8 battery charger SST to maintain battery voltage.
Source components: EQUIPMENT.
Source record 10194891 at NHTSANHTSA communication ID: 10194714
NHTSA source summary · Original PDF not reviewed by Recallfolio
There have been warranty claims submitted for growling or bearing whine noise in differentials, transfer units and transmissions where the source of the noise was a wheel bearing. This misdiagnosis can lead to multiple repair attempts, warranty debits, and additional inconvenience and/or cost to the customer. To reduce the chance of this occurring, please follow the steps outlined in the repair procedure.
Source components: POWER TRAIN.
Source record 10194714 at NHTSANHTSA communication ID: 10194659
NHTSA source summary · Original PDF not reviewed by Recallfolio
When programming a key or installing a Genuine Mazda Accessory Remote Engine Start system, you may encounter programming difficulty. This may be caused by a customer installed aftermarket decorative trim and/or cover on the START/STOP ENGINE button. The aftermarket accessory may create electrical interference, which may interfere with programming.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING · EQUIPMENT.
Source record 10194659 at NHTSANHTSA communication ID: 10194657
NHTSA source summary · Original PDF not reviewed by Recallfolio
If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal Workshop Manual diagnosis. Aftermarket devices may be the cause of the electrical concern. Ask the customer if any aftermarket devices have been installed.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING · EQUIPMENT.
Source record 10194657 at NHTSANHTSA communication ID: 10194762
NHTSA source summary · Original PDF not reviewed by Recallfolio
Auxiliary key blank cutting procedure: There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method, B. Auxiliary Key Code Cut Method
Source components: EQUIPMENT.
Source record 10194762 at NHTSANHTSA communication ID: 10191538
NHTSA source summary · Original PDF not reviewed by Recallfolio
APPLE CARPLAY / ANDRID AURO FREQUENTLY ASKED QUESTIONS (FAQ) The following vehicles are not equipped with Apple CarPlay⢠/ Android Autoâ¢, but it can be activated using MDARS. See Activation instructions on MGSS -> Infotainment -> MAZDA CONNECT Updates -> Apple Carplay / Android Auto MDARS Activation Instructions
Source components: EQUIPMENT.
Source record 10191538 at NHTSANHTSA communication ID: 10190954
NHTSA source summary · Original PDF not reviewed by Recallfolio
This service information provides basic Q-85/T-110 battery handling procedures. Complete service information can be found in MGSS online or Workshop Manual (section 13-17).
Source components: ELECTRICAL SYSTEM · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10190954 at NHTSANHTSA communication ID: 10190971
NHTSA source summary · Original PDF not reviewed by Recallfolio
MAZDA CONNECT Symptom Troubleshooting (6th Generation Vehicles). Use the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns.
Source components: EQUIPMENT.
Source record 10190971 at NHTSANHTSA communication ID: 10213453
NHTSA source summary · Original PDF not reviewed by Recallfolio
Mazda connect "no signal" message in reverse
Source components: VISIBILITY:REARVIEW MIRRORS/DEVICES.
Source record 10213453 at NHTSANHTSA communication ID: 10213447
NHTSA source summary · Original PDF not reviewed by Recallfolio
MIL ON WITH DTC PO451 AND/OR PO12A Some customer s may complain about a MIL ON with DTC P0451 (Fuel tank pressure sensorL sensor characteristic malfunction) and/or P013A (HO2S: Slow response (during transition from rich to lean)) Recall 8615J repair procedure may correct this concern
Source components: BACK OVER PREVENTION · FUEL SYSTEM, GASOLINE · SERVICE BRAKES.
Source record 10213447 at NHTSANHTSA communication ID: 10189797
NHTSA source summary · Original PDF not reviewed by Recallfolio
If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal Workshop Manual diagnosis. Aftermarket devices may be the cause of the electrical concern. Ask the customer if any aftermarket devices have been installed.
Source components: ELECTRICAL SYSTEM.
Source record 10189797 at NHTSANHTSA communication ID: 10189816
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles may exhibit wear/peel-off of the leather steering wheel surface causing a poor appearance. This concern may be caused by an insufficient wear resistance of the steering wheel surface.
Source components: STEERING.
Source record 10189816 at NHTSANHTSA communication ID: 10189952
NHTSA source summary · Original PDF not reviewed by Recallfolio
SERVICE REACTIVATION AND OWNER LOYALTY PROGRAM (CSP10) - EXPIRES APRIL 30, 2021
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10189952 at NHTSANHTSA communication ID: 10188086
NHTSA source summary · Original PDF not reviewed by Recallfolio
SERVICE REACTIVATION AND OWNER LOYALTY PROGRAM (CSP10) - EXPIRES APRIL 30, 2021
Source components: ENGINE AND ENGINE COOLING · WHEELS.
Source record 10188086 at NHTSANHTSA communication ID: 10188016
NHTSA source summary · Original PDF not reviewed by Recallfolio
This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.
Source components: ELECTRICAL SYSTEM.
Source record 10188016 at NHTSANHTSA communication ID: 10188015
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Mazda DCA-8000PM is required for all warranty battery testing. If the Mazda DCA-8000PM is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code.
Source components: ELECTRICAL SYSTEM.
Source record 10188015 at NHTSANHTSA communication ID: 10186701
NHTSA source summary · Original PDF not reviewed by Recallfolio
A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is caused by condensation, dust, and pollen within the cooling unit. This condition is usually worse during high humidity conditions. âÂÂMazda Air Cooling Coil Coatingâ is available to encapsulate the mold to reduce odors. If the product is properly applied, it can effectively reduce the musty/mildew odor for up to three years.
Source components: EQUIPMENT.
Source record 10186701 at NHTSANHTSA communication ID: 10186699
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may complain that the steering wheel is off center more than 3ð even when driving straight on a flat road.
Source components: STEERING.
Source record 10186699 at NHTSANHTSA communication ID: 10186696
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles may experience the CHECK ENGINE LIGHT ON with DTC P2610 and P2507 stored in memory after engine start and room fuse 15A (A) removed. P2610:00: Instrument cluster internal engine off timer performance problem. P2507:00: PCM battery voltage low input
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING · EQUIPMENT.
Source record 10186696 at NHTSANHTSA communication ID: 10186703
NHTSA source summary · Original PDF not reviewed by Recallfolio
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer
Source components: ELECTRICAL SYSTEM · EQUIPMENT · VEHICLE SPEED CONTROL.
Source record 10186703 at NHTSANHTSA communication ID: 10186698
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains.
Source components: WHEELS.
Source record 10186698 at NHTSANHTSA communication ID: 10186693
NHTSA source summary · Original PDF not reviewed by Recallfolio
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN · STEERING · WHEELS.
Source record 10186693 at NHTSANHTSA communication ID: 10185181
NHTSA source summary · Original PDF not reviewed by Recallfolio
In order to ensure key code security, MNAO has restricted key code access for the new auxiliary key. This Service Alert provides information on how to obtain the 10-digit key code needed for cutting a new auxiliary key blank if all auxiliary keys are lost.
Source components: EQUIPMENT.
Source record 10185181 at NHTSANHTSA communication ID: 10185049
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles may exhibit wear/peel-off of the leather steering wheel surface causing a poor appearance. This concern may be caused by an insufficient wear resistance of the steering wheel surface.
Source components: EQUIPMENT · STEERING.
Source record 10185049 at NHTSANHTSA communication ID: 10183607
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may complain about the following MAZDA CONNECT⢠Temperature Warning message: ï· Display is too Hot. Screen performance may be decreased until it cools. The warning message displays when the MAZDA CONNECT⢠screen temperature is above 176 degrees Fahrenheit (80 degrees Celsius).
Source components: ELECTRICAL SYSTEM · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10183607 at NHTSANHTSA communication ID: 10183601
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles may exhibit a Connectivity Master Unit (CMU), a BLUETOOTHî hands-free unit or text messaging related concerns. To improve the handling of BLUETOOTHî hands-free and/or text messaging customer concerns, Mazda created a special service and parts exchange program as of February 2010.
Source components: ELECTRICAL SYSTEM · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10183601 at NHTSANHTSA communication ID: 10183604
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may complain about high engine oil consumption. Before attempting any repairs, verify the complaint by using the guideline below to determine if an engine repair is necessary: Engine Oil Consumption Inspection Guideline 1. Record the vehicle mileage. 2. Engine at normal operating temperature, top off engine oil level to the full mark on the dipstick. 3. Ask the customer to return to the dealer after 1200 miles to recheck the engine oil level. 4. After 1200 miles, engine at normal operating temperature, check the engine oil level on the dipstick. 5. Is the engine oil level above the low mark on the dipstick? ïÃÂ÷ Yes - No repair is necessary. ïÃÂ÷ No - Proceed to MGSS online or Workshop Manual (section 01-03 NO. 16 HIGH OIL CONSUMPTION/LEAKAGE).
Source components: ENGINE AND ENGINE COOLING.
Source record 10183604 at NHTSANHTSA communication ID: 10183592
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may complain of a whining noise from the automatic transaxle when driving at 10 mph and above. The noise: ï· Depends on the vehicleâÂÂs speed only (the more speed, the more noise) ï· Occurs with all types of driving (acceleration, deceleration, steady speed) ï· Does not depend on rpm, gear, or ATF temperature
Source components: POWER TRAIN.
Source record 10183592 at NHTSANHTSA communication ID: 10182123
NHTSA source summary · Original PDF not reviewed by Recallfolio
Currently, the instructions on MGSS recommend the use of Loctite 962T or equivalent when installing a SKYACTIV cylinder head, but it is no longer available. The following 3 adhesives are alternatives available as an equivalent to Loctite 962T: Loctite 272, Loctite 518 Threebond TB-1386H
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.
Source record 10182123 at NHTSANHTSA communication ID: 10182130
NHTSA source summary · Original PDF not reviewed by Recallfolio
MAZDA CONNECT TOUCH SCREEN CONCERN WARRANTY EXTENSION SPECIAL SERVICE PROGRAM: Mazda Motor Corporation is extending the warranty coverage for a specific concern regarding the Mazda Connect Center Display on certain 2014-2016 Mazda3 vehicles produced from June 11, 2013 through September 3, 2016. Please refer to the Parts and Warranty page for specific production date ranges for MC and MMVO produced vehicles as they are different. Concern Outline: On certain 2014-2016 Mazda3 vehicles, the Mazda Connect touch screen in the center display may not accept touch commands properly or may operate by itself (ghost touch). The ITO (Indium Tin Oxide) film of the touch screen may be corroded due to moisture, which may adhere on the lens of the touch screen during the cleaning process at the plant. The corrosion may allow the electrostatic capacity to vary without any input, causing the malfunction of the touch screen. This warranty extension program applies only to the repair of the center display with this concern.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10182130 at NHTSANHTSA communication ID: 10182122
NHTSA source summary · Original PDF not reviewed by Recallfolio
APPLE CARPLAY / ANDROID AUTO FREQUENTLY ASKED QUESTIONS (FAQ): NOTE: The following vehicles are not equipped with Apple CarPlay / Android Auto, but it can be activated using MDARS. See Activation instructions on MGSS - Infotainment - MAZDA CONNECT Updates - Apple Carplay / Android Auto MDARS Activation Instructions
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10182122 at NHTSANHTSA communication ID: 10180668
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles may exhibit a distorted image or no image from the rear mount camera when shifted into reverse. Due to friction, the coating of camera socket terminals may wear out, creating high electrical resistance. NOTE: The icons and the messages are displayed normally.
Source components: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA · EQUIPMENT ADAPTIVE/MOBILITY · VISIBILITY.
Source record 10180668 at NHTSANHTSA communication ID: 10180667
NHTSA source summary · Original PDF not reviewed by Recallfolio
All Mazda Connect vehicles in new car inventory must be updated to the software version listed below in this TSB as part of the New Car Ready Step 3 process. Make sure the new vehicle specialist receives a copy of this bulletin. Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 70.00.367 or later). NOTE: For 2016 CX-9 with version earlier than 59.00.441, the tachometer function will be removed from the Active Driving Display as part of MazdaâÂÂs continuing efforts to improve safety and reduce driver distraction. Please explain this to the customer before updating the software. If the customer agrees, turn off the tachometer display on the AD-Display tab in MAZDA CONNECT Settings before performing the update.
Source components: ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10180667 at NHTSANHTSA communication ID: 10179079
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may complain about an unusual noise coming from the engine compartment for about 20 seconds after a cold engine start. This noise is a normal engine operation for improved exhaust gas emissions. The noise does not indicate a malfunction. ACCELERATED WARM-UP SYSTEM (AWS): All SKYACTIV-G engines adopt AWS to reduce exhaust gas emissions immediately after a cold engine start. AWS increases the engine idling speed and retards the ignition timing for about 20 seconds after the cold engine start to quickly warm up the catalytic converter. The customer may identify the engine sound during the AWS operation as a unusual noise.
Source components: ENGINE AND ENGINE COOLING.
Source record 10179079 at NHTSANHTSA communication ID: 10179315
NHTSA source summary · Original PDF not reviewed by Recallfolio
When performing vehicle services such as control unit software update, control unit registration/activation, CMU log data retrieval, etc., always use the GR8 battery charger SST to maintain battery voltage.
Source components: ELECTRICAL SYSTEM.
Source record 10179315 at NHTSANHTSA communication ID: 10179228
NHTSA source summary · Original PDF not reviewed by Recallfolio
New CARB regulation regarding mandatory checking and documenting of tire pressure whenever a vehicle is in for service work. This applies to all service shops (including Mazda dealerships) in California effective September 1, 2010.
Source components: TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS · WHEELS.
Source record 10179228 at NHTSANHTSA communication ID: 10177850
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customer's may complain that the front power window(s) do not operate after the vehicle has been parked outside during freezing temperatures. This may be caused by water that infiltrates into the power window regulator and freezes in the drum groove for the cable. Then when the power window is operated, the cable slips out from the ice-filled groove and tangles, blocking further window operations.
Source components: ELECTRICAL SYSTEM · VISIBILITY.
Source record 10177850 at NHTSANHTSA communication ID: 10177847
NHTSA source summary · Original PDF not reviewed by Recallfolio
When encountering a vehicle with paint damage, refer to the "Mazda Paint Warranty Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
Source components: EQUIPMENT.
Source record 10177847 at NHTSANHTSA communication ID: 10177844
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles may exhibit one of the following concerns: ï· Sometimes the shifter may jump out of 3rd gear over a road bump when accelerating after deceleration at 25-40 mph (40-65 km/h) ï· Hard to shift into 3rd, 4th, 5th, and/or 6th gear ï· Shift lever vibrates when driving in 3rd or 4th gear. This is caused by inappropriate transmission internal parts.
Source components: POWER TRAIN.
Source record 10177844 at NHTSANHTSA communication ID: 10177853
NHTSA source summary · Original PDF not reviewed by Recallfolio
If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal Workshop Manual diagnosis. Aftermarket devices may be the cause of the electrical concern. Ask the customer if any aftermarket devices have been installed. Below are a couple of examples of unusual electrical concerns caused by aftermarket devices.
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10177853 at NHTSANHTSA communication ID: 10177843
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles may experience the check engine light and automatic transaxle warning light ON with one or more of these DTCs stored in the TCM memory (P0842, P0847, P0872, P0877, P0780, P1738). This is caused by the oil pressure switch A and/or B at the control valve body temporarily or permanently getting stuck due to contamination entering the passage. To correct the problem, some mass production changes have been implemented to reduce contamination and improve the DTC diagnostic logic.
Source components: ENGINE · EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · POWER TRAIN.
Source record 10177843 at NHTSANHTSA communication ID: 10177005
NHTSA source summary · Original PDF not reviewed by Recallfolio
Use the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10177005 at NHTSANHTSA communication ID: 10177012
NHTSA source summary · Original PDF not reviewed by Recallfolio
When replacing manual or automatic transmission, make sure to remove the plug from the old transmission (as shown below) and then re-install it to the new transmission with a new washer. The new transmissions (including remanufactured A/T) have a shipping plug, as shown in the figures (M/T: black, rubber made; A/T: pink and black, with breather). This plug is for shipping use only and needs to be removed in order to re-install the original plug from the old transmission.
Source components: POWER TRAIN.
Source record 10177012 at NHTSANHTSA communication ID: 10176977
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may experience the MAZDA CONNECT rebooting or the screen turning black during cold temperatures. The concern occurs when the interior of the vehicle is cold and disappears when the interior warms up. This is caused by some SD cards for the MAZDA CONNECT navigation system being manufactured with improper hardware, resulting in a data reading error during cold temperatures. To correct the concern, the SD card hardware has been changed.
Source components: ELECTRICAL SYSTEM · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10176977 at NHTSANHTSA communication ID: 10174583
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may experience the MAZDA CONNECT rebooting or the screen turning black during cold temperatures. The concern occurs when the interior of the vehicle is cold and disappears when the interior warms up. This is caused by some SD cards for the MAZDA CONNECT navigation system being manufactured with improper hardware, resulting in a data reading error during cold temperatures. To correct the concern, the SD card hardware has been changed.
Source components: ELECTRICAL SYSTEM · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10174583 at NHTSANHTSA communication ID: 10174650
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may complain about a rear view monitor display that is: ï· Blank (or may have backup camera warning message)ï· Distortedï· Blurryï· Fuzzy ï· Split screen (see attached video)ï· Grainy. The icons and text are normally displayed.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10174650 at NHTSANHTSA communication ID: 10174570
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles may exhibit an unusual noise (clacking) from under the front of the vehicle. This noise only occurs when starting to move the vehicle while the steering wheel is fully turned to the driver-side (left side for LHD vehicle and right side for RHD vehicle). NOTE: The noise will not occur if the steering wheel is in the center or to the full passenger-side position. The noise is caused when the edge (A) of the inner ball joint (B) gets stuck with the steering gear housing (C).
Source components: STEERING.
Source record 10174570 at NHTSANHTSA communication ID: 10173097
NHTSA source summary · Original PDF not reviewed by Recallfolio
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · POWER TRAIN · SERVICE BRAKES, HYDRAULIC.
Source record 10173097 at NHTSANHTSA communication ID: 10173253
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may complain about incorrect MAZDA CONNECT clock time. This may be caused by an incorrect clock GPS Sync setting.
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10173253 at NHTSANHTSA communication ID: 10173250
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may complain about a rear view monitor display that is: ï· Blank (or may have backup camera warning message) ï· Distorted ï· Blurry ï· Fuzzy ï· Split screen (see attached video) ï· Grainy. The icons and text are normally displayed.
Source components: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA · EQUIPMENT ADAPTIVE/MOBILITY · VISIBILITY.
Source record 10173250 at NHTSA