2019 Jeep GRAND CHEROKEE Manufacturer communications & TSBs.Page 6
Original record summaries, dates and identifiers for this model-year. Records 501–514 of 514, ordered newest first. Dated records on this page: May 8, 2019–Oct 3, 2019.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Oct 3, 2019Service Bulletin/Repair Instructions
08-093-19
NHTSA communication ID: 10168436
NHTSA source summary · Original PDF not reviewed by Recallfolio
UKV Radio Enhancements This bulletin involves inspecting and if required, updating the radio software level to 28.3. Customers may experience one or more of the following:Display screen turns yellow. Warning chime will not turn off. In addition, the following software enhancements are available:Bluetooth improvements. Voice Recognition (VR) improvements. Radio stability improvements.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Radio and Back-up Camera Enhancements This bulletin involves updating the radio software level to 1848.24. Customers may experience one or more of the following: Green horizontal lines on back up display, in reverse (If this is the customer concern use camera LOP 18-60-02-W2, on DT and JL vehicles only). Ghost Touch, features, modes and App?s changing without drivers input. Speaker pop noise when using Bluetooth device. When vehicle is first start the radio will reset and the time display shows 12:00. Audio distortion and volume fluctuation. Blank rear camera image in reverse (If this is the customer concern use camera LOP 18-60-02-W2, on DT and JL vehicles only). Audio distortion (KL vehicles). Audio cutting in and out during memory recall. Ring tone too loud. AM/FM volume fluctuates. While in CarPlay® or Android Auto Google® maps showing wrong location. Phone disconnected after first call. Black screen or White screen with vertical lines. Personal Identification Number (PIN) clears and volume locked while KeySense is used. Audio static while in SXM/SAT modes. Echo heard during Bluetooth phone calls. The radio is locked up. The radio remains on after ignition has been turned off. The radio resets. The radio screen turns black. Intermittently requires an anti-theft code to be entered. Software update also includes software enhancement. SXM sound and behavior improvements.
Source components: BACK OVER PREVENTION · ELECTRICAL SYSTEM · EQUIPMENT.
NHTSA source summary · Original PDF not reviewed by Recallfolio
RETAINER, Crankshaft Rear Oil Seal Oil leak from rear engine seal retainer or windage tray/gasket Check for other sources of leaks using dye such as gallery plugs, camshaft cup plug at rear of engine, rear of engine valley for possible MDS solenoid, VVT solenoid, block porosity or transmission leaks. If another source of the leak was identified, proceed with the appropriate repairs. Engineering is looking for assistance in determining root cause and a corrective action on crankshaft rear oil seals and windage tray/gaskets. For concerns related to rear crankshaft seal oil leaks and windage tray gaskets, please send an email to brenton.swank@fcagroup.com. Include the VIN, mileage, and any photos identifying where the leak is coming from using dye, such as: 1. Leak between rear seal and crankshaft (seal rolled during installation) 2. Leak between outer diameter of rear seal and retainer 3. Leak between rear seal retainer and engine block (Please record the 5 retainer bolts residual torque in tightening direction) 4. Leak between rear seal retainer and windage tray/gasket (Please record the oil pan bolts residual torque in tightening direction) If the source of the leak cannot be identified, please contact Brenton Swank at (248) 804-9386 or Brenton.Swank@FCAGroup.com If no response in 15 minutes, proceed with repair.
Source components: ENGINE · ENGINE AND ENGINE COOLING.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Pentastar Upgrade Oil Fill Level after an Oil Change This bulletin involves rechecking the oil fill level after filling the engine to the correct specifications. The customer may describe that after an oil change they check their oil fill level and it is showing overfilled on the oil dipstick.
NHTSA source summary · Original PDF not reviewed by Recallfolio
LATCH, Liftgate For Liftgate latch not locking and/or unlocking intermittently, please verify there is no glass in the latch from the rear window breaking. Carefully inspect the part for small shards of glass.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Powertrain Control Module (PCM) Updates - AN-K8-18-20190515 Refer to China Joint Venture (JV) released document AN-K8-18-20190515, for details on this service action.
Source components: ELECTRICAL SYSTEM · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Radio and Back-up Camera Enhancements This bulletin involves updating the radio software level to 1848.24. Customers may experience one or more of the following:Green horizontal lines on back up display, in reverse (If this is the customer concern use camera LOP 18-60-02-W2, on DT and JL vehicles only). Ghost Touch, features, modes and App?s changing without drivers input. Speaker pop noise when using Bluetooth device. When vehicle is first start the radio will reset and the time display shows 12:00. Audio distortion and volume fluctuation. Blank rear camera image in reverse (If this is the customer concern use camera LOP 18-60-02-W2, on DT and JL vehicles only). Audio distortion (KL vehicles). Audio cutting in and out during memory recall. Ring tone too loud. AM/FM volume fluctuates. While in CarPlay® or Android Auto Google® maps showing wrong location. Phone disconnected after first call. Black screen or White screen with vertical lines. Personal Identification Number (PIN) clears and volume locked while KeySense is used. Audio static while in SXM/SAT modes. Echo heard during Bluetooth phone calls. The radio is locked up. The radio remains on after ignition has been turned off. The radio resets. The radio screen turns black. Intermittently requires an anti-theft code to be entered. Software update also includes software enhancement.SXM sound and behavior improvements.
Source components: BACK OVER PREVENTION · ELECTRICAL SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
UAV and UCV Radio Enhancements This bulletin involves inspecting and if required, updating the radio software level to 28.3 Customers may experience one or more of the following: Display screen turns yellow. Warning chime will not turn off. Software updated includes the following enhancements: Bluetooth® improvements. Voice Recognition (VR) improvements. Radio stability improvements.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Heating, Ventilation and Air Conditioning (HVAC) Module Updates This bulletin involves reprogramming the HVAC control module with the latest availablesoftware. The customer may experience the following: During start up, in cold ambient temperatures, the HVAC automatic temperaturecontroller will over heat the cabin temperature around 10-15 minutes into the drive. Customers will feel their upper body warmer than their lower body.
Source components: ELECTRICAL SYSTEM · VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
RADIO [RES] - New and/or Service Exchange For RES radio concerns. Use the wiTECH 2.0 and inspect the radio part number and serial number under the Radio/ECU Details tab. Please verify that the radio part number and/or serial number is not "FFFF". If either field shows "FFFF", please contact Mike Wielgat at 248-576-6696 or Rohan Negandhi at 248-421-9608 If no response in 15 minutes, proceed with repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SEAL, Crankshaft Oil, Front Front crankshaft oil seal leak: For concern of front crankshaft seal leak please send an email to brenton.swank@fcagroup.com with VIN, Mileage, Photos and indicate where the leak is identified using dye such as: 1. Leak between the outer diameter of the seal to front cover? 2. Leak between the seal and damper 3. Leak through the damper bolt This will help in determining root cause and corrective action. For additional questions, please contact: Brenton Swank: Cell (248) 804-9386 or brenton.swank@fcagroup.com If no response in 15 minutes, proceed with repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one of the following Diagnostic Trouble Codes (DTCs) have been set:P06EF - Engine Restart Performance.After an Engine Stop/Start (ESS) event, the vehicle may exhibit a delay in cranking with an active P06EF. P0111 - Intake Air Temperature Sensor 1 Performance.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
ACTUATOR, A/C and Heater Before replacing HVAC actuator, please contact either Thomas Conway (248) 635-7090 or Paul Aquino (248) 854-4819. Engineering is looking to gather infomation on fail mode and customer concern. If no response in 15 minutes, proceed with repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
MASTER CYLINDER, Brake Prior to replacing master cylinder, please call Paul Kuehl at (248) 535 -7013 and/or Tim Parks at (248) 202-0919. If no response in 15 minutes, proceed with repair.
Source components: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER.