The manufacturer’s record · Page 10 of 13
Original record summaries, dates and identifiers for this model-year. Records 901–1,000 of 1,212, ordered newest first. Dated records on this page: Jun 7, 2016–Feb 13, 2017.
Back to 2016 GMC SIERRA 1500 problems & recallsThis archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
NHTSA communication ID: 10113419
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a squeak or chirp type noise from the rear of the vehicle. Technician should use the latest version of PI1201. If the noise is gone replace the muffler and tail pipe assembly.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
Source record 10113419 at NHTSANHTSA communication ID: 10113415
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician on the steps to help diagnose and repair vehicles with a rattle, squeak, clunk, thump, or bump. If published Service Information diagnostics do not lead to a repair for the concern. Technician should inspect the opposite side shock/strut for the cause of the concern.
Source components: SUSPENSION:FRONT.
Source record 10113415 at NHTSANHTSA communication ID: 10113397
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary information communicates that water leaking into the headlamp assembly or headlamp assembly connections can cause an electrical short which will keep modules from shutting down causing a dead battery and a no crank condition, a crank no start,or unable to program the engine control module. Engine control module will set a diagnostic trouble code of P1682, or the engine will continue to run with the ignition off.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10113397 at NHTSANHTSA communication ID: 10113393
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary information communicatesContent Theft Deterrent RPO UTJ is included and only available with Remote Vehicle Start RPO BTV. If the vehicle is not equipped with Remote Vehicle Start RPO BTV the vehicle will not have Content Theft Deterrent.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10113393 at NHTSANHTSA communication ID: 10130553
NHTSA source summary · Original PDF not reviewed by Recallfolio
44180 01 - Customer Satisfaction - Certain vehicles may have key codes which were inappropriately handled by a third party which could increase the risk of vehicle theft. Dealers are to replace all applicable keys and lock cylinders with new key configurations.
Source components: EQUIPMENT.
Source record 10130553 at NHTSANHTSA communication ID: 10130547
NHTSA source summary · Original PDF not reviewed by Recallfolio
28770 - SUB A ?Service 4WD? message may be displayed on the Driver Information Center and DTC C0398 may be set. Concurrently, the vehicle is permanently locked in 4HI and cannot be shifted shift out of it while the code is present. If the code is cleared, this scenario may repeat if the transfer case is in ?Auto? mode and driven for approx. 2 or more hours. Customers will likely notice that the steering wheel is harder to turn, the engine will feel like it has lost power and the tires may squeal when turning in a parking lot. Dealers are to reprogram the transfer case.
Source components: ELECTRICAL SYSTEM.
Source record 10130547 at NHTSANHTSA communication ID: 10138009
NHTSA source summary · Original PDF not reviewed by Recallfolio
This engineering information bulletin ends the need for information from the field on vehicles that have the condition of the Air bag light illuminated and SIR codes set within the SIR module.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10138009 at NHTSANHTSA communication ID: 10137996
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides a procedure to reprogram the FVCM if the battery has issues that are related to the front camera module.
Source components: ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT · FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA.
Source record 10137996 at NHTSANHTSA communication ID: 10138006
NHTSA source summary · Original PDF not reviewed by Recallfolio
This engineering information bulletin is ending the need for information on vehicles with the condition of Vehicle Crank with No Start or Stalling with DTC P0011 and/or P00C6 Set.
Source components: EQUIPMENT.
Source record 10138006 at NHTSANHTSA communication ID: 10138001
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin adds the 2016 model year to repair information to correct a customer concern of the hood fluttering, vibrating or displaying visible motion at highway speeds or over rough road surfaces.
Source components: STRUCTURE:BODY:HOOD.
Source record 10138001 at NHTSANHTSA communication ID: 10137990
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information to dealership personnel regarding formulation of a lighter variant paint being made available in order to match the paint on trucks exhibiting a lighter color due to mis-application at the plant.
Source components: EQUIPMENT · STRUCTURE:BODY.
Source record 10137990 at NHTSANHTSA communication ID: 10138013
NHTSA source summary · Original PDF not reviewed by Recallfolio
This engineering informational bulletin is requesting information from the field on vehicles that have the condition of a MIL or a engine misfire due to a loose spark plug wire.
Source components: ENGINE AND ENGINE COOLING.
Source record 10138013 at NHTSANHTSA communication ID: 10137622
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Informational bulletin describes warranty part reviews where door glass had chips or scratches.
Source components: STRUCTURE:BODY:DOOR · VISIBILITY:GLASS, SIDE/REAR.
Source record 10137622 at NHTSANHTSA communication ID: 10099878
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES THAT MAY HAVE A SERVICE ENGINE SOON MALFUNCTION INDICATOR LAMP ON. TECHNICIAN MAY FIND DIAGNOSTIC TROUBLE CODES P0106 AND P0506. TECHNICIAN WILL INSPECT FOR A BROKEN VALVE SPRING AND REPLACE AS NEEDED.
Source components: ENGINE.
Source record 10099878 at NHTSANHTSA communication ID: 10099236
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLE THAT WILL HAVE NO XM AUDIO OR NO SIGNAL. DEALER SHOULD COMMUNICATE TO THE CUSTOMER THAT WE APOLOGIZE FOR THIS INCONVENIENCE AND THAT GENERAL MOTORS IS WORKING ON A SOLUTION FOR THIS CONCERN.
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10099236 at NHTSANHTSA communication ID: 10099961
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLE THAT MAY HAVE A SERVICE ENGINE SOON MALFUNCTION INDICATOR LAMP ON. TECHNICIAN MAY FIND DIAGNOSTIC TROUBLE CODES P2635, U0074 AND OR U18A2. TECHNICIAN WILL NEED TO FOLLOW PUBLISHED DIAGNOSTICS FOR DIAGNOSTIC TROUBLE CODES U0074 WOULD TAKE PRIORITY OVER U18A2 IF BOTH SET BEFORE ADDRESSING DTC P2635.
Source components: ELECTRICAL SYSTEM · ENGINE.
Source record 10099961 at NHTSANHTSA communication ID: 10099150
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES WITH AN INTERMITTENT LOSS OF GRIDLINES IN THE REAR CAMERA DISPLAY SCREEN AND A "SERVICE REAR VISION SYSTEM" MESSAGE THAT BOTH HAPPEN AT THE SAME TIME. TECHNICIAN SHOULD CHECK FOR DIAGNOSTIC TROUBLE CODES AND FOLLOW PUBLISHED SERVICE INFORMATION DIAGNOSTICS FOR THE DIAGNOSTIC TROUBLE CODES. IF NOT DIAGNOSTIC TROUBLE CODES STORED AND THE CONCERN WAS DUPLICATED OR THE CUSTOMER DESCRIBED THE CONCERN, DEALER SHOULD COMMUNICATE TO THE CUSTOMER THAT WE APOLOGIZE FOR THIS INCONVENIENCE AND THAT GENERAL MOTORS IS CURRENTLY EVALUATING THIS CONCERN.
Source components: BACK OVER PREVENTION: CAMERA SYSTEM.
Source record 10099150 at NHTSANHTSA communication ID: 10099468
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN THE STEPS NEEDED TO DIAGNOSE AND REPAIR VEHICLES WITH A ROUGH IDLE AND/OR VIBRATION AT IDLE IN DRIVE. THIS CONDITION WILL NOT BE PRESENT IN PARK, OR NEUTRAL. THIS CONCERN MAY BE CAUSED BY GROUND OUT WITHIN THE ONE OR BOTH ENGINE MOUNTS. TECHNICIAN WILL USE CH-51450-A (PICO OSCILLOSCOPE) TO MEASURE THE VIBRATION DISTURBANCE. IF THE VIBRATION CONCERN IS E1.5 IN THE HORIZONTAL / LATERAL DIRECTION WITH PICO SENSOR MOUNTED IN SEAT TRACK AS INDICATED CONTINUE WITH STEPS TO REDUCE THE AMPLITUDE OF THE VIBRATION BY ADDING SPACERS IN KEY LOCATIONS TO REDUCE GROUND OUT WITHIN THE ENGINE MOUNTS. THE 6.2L ENGINE HAS A CHARACTERISTIC E1 WHICH CAN BE FELT, AND MAY BE DESCRIBED AS A LOPEY IDLE. DO NOT CONFUSE 6.2L E1 CHARACTERISTIC (NOT CAUSED BY MOUNT GROUND-OUT), WITH E1.5 NORMAL IDLE CHARACTERISTICS BEING TRANSMITTED INTO THE TRUCK VIA GROUND-OUT THRU THE ENGINE MOUNTS.
Source components: ENGINE.
Source record 10099468 at NHTSANHTSA communication ID: 10099460
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN THAT THE 6.6L DURAMAX, REGULAR PRODUCTION OPTION CODE LML/LGH, ENGINE PART NUMBER 12638505 PARTS RESTRICTION HAS ENDED. DEALER CAN ORDER PARTS THROUGH THE REGULAR CUSTOMER CARE AND AFTERSALES PARTS PROCESS.
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL.
Source record 10099460 at NHTSANHTSA communication ID: 10100535
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES THAT HAVE A POOR HEATER-VENT-AIR CONDITIONING AIR FLOW FROM THE PASSENGER SIDE FAR RIGHT DASH VENT WHEN COMPARED TO THE OTHER DASH VENTS. TECHNICIAN WILL NEED TO REMOVE THE HEATER-VENT-AIR CONDITIONING AIR DISTRIBUTOR DUCT. TECHNICIAN CAN NOW CUT OUT THE PORTION OF THE DEFLECTOR TO INCREASE AIR FLOW.
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10100535 at NHTSANHTSA communication ID: 10100046
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN WITH THE STEPS ON DIAGNOSING AND REPAIRING VEHICLES THAT MAY HAVE UNWANTED GRADE BRAKING, REDUCED ENGINE POWER WITH NO DRIVER INFORMATION CENTER MESSAGES BRAKE PEDAL OVERRIDE FEATURE , TRANSMISSION BUSY OR FREQUENT SHIFTING UP OR DOWN, AND DIAGNOSTIC TROUBLE CODES P057B, P057C, AND/OR P057D MAY OR MAY NOT BE SET. TECHNICIAN WILL USE THIS PRELIMINARY INFORMATION TO FIND THE BRAKE PEDAL POSITION DATA PARAMETERS IN THE SCAN TOOL, AND ALSO TO PROVIDE SOME ADDITIONAL DIAGNOSTIC HELP. THESE ISSUES MAY BE CAUSED BY AN INCORRECT BRAKE PEDAL POSITION SENSOR INPUT TO THE ENGINE CONTROL MODULE. TECHNICIAN WILL VERIFY WITH THE SCAN TOOL IF THE ENGINE CONTROL MODULE HAS THE CORRECT PARAMETERS FOR THE BRAKE PEDAL POSITION SENSOR. IF AN ENGINE CONTROL MODULE BRAKE PEDAL POSITION SENSOR RELEARN IS PERFORMED, THE TRUCK MAY BE TEMPORARILY REPAIRED UNTIL THE INTERMITTENT WIRING ISSUE BETWEEN THE ENGINE CONTROL MODULE AND BRAKE PEDAL POSITION SENSOR OCCURS AGAIN. ON 2014 AND NEWER TRUCKS INSPECT AND REPAIR ANY DAMAGE TO X115 AND X119. ON THE 2014 AND PREVIOUS TRUCKS INSPECT AND REPAIR ANY DAMAGE TO X205.
Source components: ELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL · ENGINE · PARKING BRAKE · POWER TRAIN:AUTOMATIC TRANSMISSION · SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES.
Source record 10100046 at NHTSANHTSA communication ID: 10099875
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES THAT HAVE SPEEDOMETER INACCURATE READS 5 MPH WHEN TRAVELING 50 MPH. ENGINEERING IS WORKING TO DEVELOP A SOLUTION.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · VEHICLE SPEED CONTROL.
Source record 10099875 at NHTSANHTSA communication ID: 10098467
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES THAT THE RADIO WILL NOT SAVE XM FAVORITES. TECHNICIAN WILL NEED TO REPLACE THE RADIO TO ADDRESS THE CONCERN.
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10098467 at NHTSANHTSA communication ID: 10098466
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES THE TECHNICIAN WITH INFORMATION ON VEHICLES WITH NAVIGATION RADIO REGULAR PRODUCTION OPTION CODE IO6 OR UY4 THAT DEFAULTS TO WEST VIRGINIA INSTEAD OF VIRGINIA ON A MANUAL ENTRY. GENERAL MOTORS ENGINEERING IS CURRENTLY WORKING ON A SOLUTION FOR THIS CONCERN.
Source components: EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).
Source record 10098466 at NHTSANHTSA communication ID: 10100442
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES THAT MAY HAVE THE ONSTAR WIRELESS FIDELITY INOPERATIVE. TECHNICIAN WILL NEED TO CONTACT GENERAL MOTORS TECHNICAL ASSISTANCE CENTER WITH A SCAN TOOL CONNECT TO THE VEHICLE FOR FURTHER ASSISTANCE.
Source components: ELECTRICAL SYSTEM · ELECTRICAL SYSTEM:SOFTWARE.
Source record 10100442 at NHTSANHTSA communication ID: 10097132
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES THAT HAVE AN ONSTAR SYSTEM THAT WILL NOT POWER UP. TECHNICIAN SHOULD TURN OFF THE IGNITION AND CANCEL RETAINED ACCESSORY POWER. AFTER THE VEHICLE HAS POWERED DOWN REMOVE POWER TO THE ONSTAR MODULE FOR FIVE MINUTES. AFTER THE POWER HAS BEEN REMOVED FOR FIVE MINUTES, IF THE ONSTAR SYSTEM IS WORKING RELEASE THE VEHICLE. IF THE ONSTAR SYSTEM IS STILL INOPERATIVE CONTINUE WITH PUBLISHED SERVICE INFORMATION DIAGNOSTICS.
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10097132 at NHTSANHTSA communication ID: 10119001
NHTSA source summary · Original PDF not reviewed by Recallfolio
16016 - Service Update. The connector position assurance (CPA) on the brake apply sensor (BAS) electrical connector may not be engaged, or the connector may not be fully seated. Dealers are to ensure that brake apply sensor connector and CPA are seated and engaged. Additionally, verify that the adjustable pedal motor control connector (if equipped) and accelerator pedal position sensor harness connectors are fully seated.
Source components: ELECTRICAL SYSTEM.
Source record 10119001 at NHTSANHTSA communication ID: 10100305
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT CUSTOMERS THAT MAY REQUEST THE FACTORY INTEGRATED TRAILER BRAKE CONTROLLER REGULAR PRODUCTION OPTION CODE (JL1) BE INSTALLED ON THEIR FULL-SIZE PICKUP OR SUV WHEN THE VEHICLE WAS NOT ORDERED WITH THE OPTION. DEALER SHOULD ADVISE THE CUSTOMER IT CANNOT BE ADDED TO THE VEHICLE.
Source components: ELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL.
Source record 10100305 at NHTSANHTSA communication ID: 10099127
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES VOICE RECOGNITION INOPERATIVE FOR CALLING BLUETOOTH PHONE CONTACTS. TECHNICIAN WILL NEED TO CLEAR ALL PRIVATE DATA AND REPAIR ANY PHONES THAT WERE DELETED.
Source components: ELECTRICAL SYSTEM.
Source record 10099127 at NHTSANHTSA communication ID: 10099981
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES THAT HAVE RAISED DENTS OR RIPPLE APPEARANCE IN THE SIDE OUTER PANEL OF THE CARGO BOX AROUND THE PERIMETER OF THE WHEEL HOUSE OPENING. TECHNICIAN SHOULD FIRST ACCESS THE REAR OF THE INNER WHEELHOUSE AREA THROUGH THE TAIL LAMP CAVITY AND THE FRONT OF THE WHEELHOUSE FROM UNDER THE VEHICLE, AND COAT THE INNER HEM OF THE WHEEL HOUSE TO SIDE OUTER PANEL WITH 3M RUST FIGHTER I. AFTER ALLOWING THE 3M RUST FIGHTER I TO DRY THEN APPLY SEVERAL COATS OF NOX RUST X-121B UNDERCOATING PART NUMBER 12346501.
Source components: STRUCTURE:BODY.
Source record 10099981 at NHTSANHTSA communication ID: 10099769
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN THAT GENERATION 5 ENGINES WITH REGULAR PRODUCTION OPTION CODE L83, L86, OR LV3 MAY HAVE AN OIL CONSUMPTION CONCERN WERE ONE QUART IN 2000 MILES IS BEING USED. DEALER WILL CONFIRM OIL LEVEL WAS PROPERLY CHECKED PER OWNERS MANUAL, AND CHECK THE BOLT TORQUE ON THE VALVE LIFTER OIL MANIFOLD ASSEMBLY, BEFORE YOU CONTACTING GENERAL MOTORS PRODUCT QUALITY CENTER.
Source components: ENGINE · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10099769 at NHTSANHTSA communication ID: 10083162
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION HAS THE STEPS ON DIAGNOSING THE CONCERN OF EXCESSIVE OIL CONSUMPTION FOR THE GENERATION 5 ENGINE AND TO CALL GENERAL MOTORS TECHNICAL ASSISTANCE CENTER FOR FURTHER ASSISTANCE. CUSTOMER'S ENGINE IS USING EXCESSIVE OIL.
Source components: ENGINE.
Source record 10083162 at NHTSANHTSA communication ID: 10082412
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO CHECK THE CYLINDERS FOR DAMAGED PISTONS AND DETERMINE IF THE USE OF AFTERMARKET CALIBRATIONS OR PERFORMANCE PARTS MAY BE THE CAUSE.
Source components: ELECTRICAL SYSTEM.
Source record 10082412 at NHTSANHTSA communication ID: 10083369
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT WHEN PROGRAMING THE IMMOBILIZER THEFT LEARN IT MAY NOT COMPLETE AND/OR SHOW "CONTROLLER ID NOT SUPPORTED" AFTER THE FIRST FEW MINUTES INTO THE LEARN EVENT. TECHNICIAN WILL NEED TO REMOVE POWER FROM THE ONSTAR MODULE BEFORE PERFORMING A IMMOBILIZER THEFT LEARN.
Source components: ELECTRICAL SYSTEM.
Source record 10083369 at NHTSANHTSA communication ID: 10083360
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN OF ADDITION INFORMATION WHEN DIAGNOSING A SERVICE DRIVER ASSIST MESSAGE WITH A DIAGNOSTIC TROUBLE CODE B172E AND OR A B172F. THE HAPTIC SEAT MOTOR HAS A PIGTAIL LEAD COMING OFF OF IT. IN MANY CASES THE WIRING PIGTAIL NEAR THE HAPTIC SEAT MOTOR HAS BROKEN AND WILL REQUIRE REPLACEMENT.
Source components: ELECTRICAL SYSTEM.
Source record 10083360 at NHTSANHTSA communication ID: 10083261
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES THAT MAY HAVE A RADIO BACKLIGHTING WILL STAY ON EVEN AFTER THE IGNITION HAS BEEN TURNED OFF AND THE KEY HAS BEEN REMOVED FOR SEVERAL MINUTES, EVENTUALLY THE BATTERY WILL DRAIN. TECHNICIAN MAY FIND FOLLOWING FUSES F23DL F22DL F30DL F31DL F32DL WITH THE IGNITION KEY IN THE OFF POSITION TO HAVE VOLTAGE. TECHNICIAN SHOULD NOT REPLACE THE TRANSFER CASE CONTROL MODULE. TECHNICIAN WILL NEED TO INSTALL A DIODE, PART NUMBER 12112422, ACROSS THE COIL OF THE SOLENOID. IT IS IMPORTANT THAT THE STRIPED END OF THE DIODE BE CONNECTED TO THE POSITIVE TERMINAL OF THE COIL AND THE OTHER END OF THE DIODE BE CONNECTED TO GROUND.
Source components: ELECTRICAL SYSTEM.
Source record 10083261 at NHTSANHTSA communication ID: 10083241
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT THE USE OF J-35616-64B TERMINAL TEST PROBE, REPLACEMENT TERMINALS, AND TERMINATED LEADS. THE J-35616-64B IS THE LATEST TEST PROBE RELEASED FOR CHECKING TENSION OR PROBING THE .64 SERIES TERMINALS. THE TEST PROBE TERMINAL HAS BEEN RELEASED IN THE TERMINAL REPAIR KIT (J-38125-620H) LOCATED IN LEAR TRAY 7 PART NUMBER 963716-2. THERE ARE 5 TERMINATED LEADS IN A PACKAGE PART NUMBER IS 13505346, WHICH CAN BE ORDERED THROUGH YOUR NORMAL GENERAL MOTORS CUSTOMER CARE AND AFTERSALES PARTS CHANNEL
Source components: ELECTRICAL SYSTEM.
Source record 10083241 at NHTSANHTSA communication ID: 10082277
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS INFORMATIONAL BULLETIN PROVIDES THE CORRECT INFORMATION THAT IS NEEDED TO CORRECTLY KNOW WHAT TPM SENSOR IS NEEDED TO BE INSTALLED ON VEHICLES IF THERE IS ACCESSORY WHEELS INSTALLED AND WHO TO CONTACT WHEN THE ACCESSORY WHEELS WILL NOT LEARN THE TPM'S TO THE VEHICLES.
Source components: EQUIPMENT · TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS.
Source record 10082277 at NHTSANHTSA communication ID: 10083325
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN THAT THE HUMAN MACHINE INTERFACE, RADIO OR TUNER, RADIO CONTROLS, INTEGRATED CENTER STACK, DISPLAY, AND MEDIA DISC PLAYERS ARE PLACED ON RESTRICTION THROUGH THE GENERAL MOTORS TECHNICAL ASSISTANCE CENTER. DEALER WILL NEED TO CONTACT GENERAL MOTORS TECHNICAL ASSISTANCE CENTER FOR FURTHER ASSISTANCE.
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10083325 at NHTSANHTSA communication ID: 10083125
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES THAT HAVE A SERVICE 4WD MESSAGE DISPLAYED IN THE DRIVER INFORMATION CENTER. TECHNICIAN MAY FIND DIAGNOSTIC TROUBLE CODES C0392 OR C0396. TECHNICIAN SHOULD CHECK THE TERMINAL TENSION ON THE TRANSFER CASE CONTROL MODULE X1 CONNECTOR. TECHNICIAN SHOULD REPAIR ANY TERMINAL THAT HAVE POOR TERMINAL TENSION.
Source components: POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE).
Source record 10083125 at NHTSANHTSA communication ID: 10082869
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS INFORMATIONAL BULLETIN PROVIDES ADDITIONAL INFORMATION ON HOW TO INSTALL PISTONS AND SUGGEST WHAT TOOLS TO USE.
Source components: ENGINE.
Source record 10082869 at NHTSANHTSA communication ID: 10082411
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO ENABLE THE 4G LTE WIFI ON NEWLY DELIVERED VEHICLES FOR SOME VEHICLES THAT WERE NOT SHIPPED WITH THE FEATURE NOT ENABLED.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10082411 at NHTSANHTSA communication ID: 10082876
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS ENGINEERING INFORMATION BULLETIN ANNOUNCES THE END FOR THE NEED OF INFORMATION ON REAR BUMPER STEP PAD MELTED OR WARPED.
Source components: EQUIPMENT · STRUCTURE:BODY:BUMPERS.
Source record 10082876 at NHTSANHTSA communication ID: 10083249
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES THAT MAY HAVE A SERVICE ENGINE SOON MALFUNCTION INDICATOR LAMP, ANTILOCK BRAKING SYSTEM MALFUNCTION INDICATOR LAMP, SERVICE SUSPENSION SYSTEM MESSAGE, MISFIRE, HESITATION, NO CRANK, HEATER-VENT-AIR CONDITIONING INOPERATIVE. TECHNICIAN MAY FIND F11UA, F104UA, F35UA, AND OR F60UA BLOWN. TECHNICIAN SHOULD INSPECT THE ENGINE HARNESS NEAR THE VACUUM PUMP PULLEY TO BE CHAFING. TECHNICIAN WILL NEED TO REROUTE THE WIRE HARNESS AND REPAIR AND DAMAGED WIRES.
Source components: ELECTRICAL SYSTEM · ENGINE · SUSPENSION.
Source record 10083249 at NHTSANHTSA communication ID: 10083251
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ON THE STEPS TO DIAGNOSE AND REPAIR VEHICLES THAT HAVE REMOTE START IS INOPERATIVE, POWER LIFT-GATE REGULAR PRODUCTION OPTION CODE (TB5) IS INOPERATIVE WITH THE IGNITION OFF, AND VEHICLES EQUIPPED WITH THE DIESEL ENGINE, THE BLOWER MOTOR MAY STAY ON AFTER THE ENGINE IS TURNED OFF. TECHNICIAN MAY FIND DIAGNOSTIC TROUBLE CODE P2537 SET. TECHNICIAN WILL NEED TO USE A VOLTMETER AND CHECK CIRCUIT 5985 AT THE ENGINE CONTROL MODULE AND TRANSMISSION CONTROL MODULE. IF NO OR LOW VOLTAGE IS FOUND, USE THE WIRING DIAGRAM IN SERVICE INFORMATION AND PERFORM NORMAL CIRCUIT DIAGNOSIS. TECHNICIAN WILL NEED TO INSPECT FOR HIGH RESISTANCE OR OPEN IN CIRCUIT 5985 IS UNDER THE DRIVERS SILL PLATE AND REPAIR AS NEEDED.
Source components: ELECTRICAL SYSTEM.
Source record 10083251 at NHTSANHTSA communication ID: 10081880
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS TECHNICAL BULLETIN PROVIDES THE PROCEDURES TO COMPLETE A TRANSSMISSION ADAPTIVE LEARN ON ALL THE DIFFERENT TYPES OF VEHICLES AND TRANSMISSIONS BASED ON RPO OPTIONS TO CORRECT A CONDITION OF HARSH SHIFTS ON HARD ACCELLERATIONS.
Source components: POWER TRAIN.
Source record 10081880 at NHTSANHTSA communication ID: 10083324
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN FOR A REDUCED POWER MESSAGE, STEERING ASSIST, ENGINE STALL OR THE INSTRUMENT PANEL, RADIO, AND OR HEATER-VENT-AIR CONDITIONING GO BLANK WITH MULTIPLE DIAGNOSTIC TROUBLE CODES. IF ANY OF THE FOLLOWING DIAGNOSTIC TROUBLE CODES U0073, U0078, U0029, U0028, U0415, U0140, U0126, U0121, U0101, U0100, C0544, U1510, U0073, B127B, B2605, B3600,C0800, U0428, AND U0452 SET IN THE VEHICLE. CHECK THE BODY CONTROL MODULE GROUND AT THE G218 LOCATION. THE FRONT DASH INSULATOR MAT MAY BE TRAPPED BETWEEN THE GROUND EYELET AND THE BODY STUD. REMOVE THE ROUND NUT AND EYELET AND CUT THE FRONT DASH INSULATOR MAT AWAY FROM THE GROUND STUD SO IT NO LONGER INTERFERES WITH THE GROUND STUD AND REINSTALL THE EYELET AND GROUND NUT. TECHNICIAN SHOULD ALSO INSPECT CONNECTOR X183 AND X133FOR ANY BROKEN, LOOSE, BACKED OUT TERMINALS AND REPAIR AS NECESSARY.
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC. · STEERING:ELECTRIC POWER ASSIST SYSTEM · STEERING:HYDRAULIC POWER ASSIST SYSTEM.
Source record 10083324 at NHTSANHTSA communication ID: 10083280
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ON HOW TO DIAGNOSE AND REPAIR VEHICLES THAT HAVE A NO CRANK OR A START AND THEN IMMEDIATE STALL, SERVICE ENGINE SOON MALFUNCTION INDICATOR LAMP MAY NOT BE ON WHEN THE IGNITION IS IN THE RUN POSITION. TECHNICIAN MAY FIND DIAGNOSTIC TROUBLE CODES P0513 AND OR P262B MAY ALSO BE SET. TECHNICIAN WILL PULLED THE DRIVER SILL PLATE AND INSPECT THE WIRING FOR DAMAGED OR CORRODED CIRCUITS. TECHNICIAN WILL REPAIR ANY DAMAGED OR CORRODED CIRCUITS.
Source components: ELECTRICAL SYSTEM.
Source record 10083280 at NHTSANHTSA communication ID: 10083321
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN WITH THE STEPS TO DIAGNOSIS AND REPAIR VEHICLES WITH VARIOUS HANDLING, VEHICLE DYNAMICS CONCERNS, NOISES FROM THE SUSPENSION OR UNDERBODY, OR ISSUES RELATED TO DAMAGED SUSPENSION COMPONENTS. BEFORE ANY IN-DEPTH DIAGNOSTICS ARE PERFORMED, BE AWARE THAT VARIOUS ISSUES COULD OCCUR IF THE VEHICLE HAS BEEN MODIFIED AND INFORM THE CUSTOMER THE CONDITIONS NOTED MAY NOT BE COVERED UNDER WARRANTY. TECHNICIAN WILL INSPECT FOR INSTALLED AFTERMARKET SUSPENSION COMPONENTS. ALSO INSPECT FOR IMPROPERLY ADJUSTED TORSION BARS.
Source components: SUSPENSION.
Source record 10083321 at NHTSANHTSA communication ID: 10083126
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ON THE STEPS TO DIAGNOSE AND REPAIR THE VEHICLES THAT MAY HAVE A SHAKE OR SHUDDER DURING LIGHT THROTTLE ACCELERATION, BETWEEN 30 AND 65 MPH STEADY STATE DRIVING. ALSO SHUDDER FEELING THAT MAY BE DESCRIBED AS DRIVING OVER RUMBLE STRIPS OR ROUGH PAVEMENT. TECHNICIAN WILL DRIVE THE VEHICLE AND MONITOR THE TORQUE CONVERTER CLUTCH SLIP. THE TORQUE CONVERTER CLUTCH SLIP SPEED SHOULD BE 10 RPM OR LESS ALSO NOTE IF THE SHUDDER TAKES PLACE DURING TORQUE CONVERTER CLUTCH APPLY. IF THE TORQUE CONVERTER CLUTCH SLIP SPEED IS IN THE RANGE OF 10 RPM OR LESS THE CONDITION IS POSSIBLY RELATED TO ENGINE PERFORMANCE. IF THE SHUDDER IS ONLY PRESENT IN 4 CYLINDER MODE AND TORQUE CONVERTER CLUTCH SLIP IS 10 RPM OR LESS DEEM THE SHUDDER CONCERN NORMAL CHARACTERISTIC OF ACTIVE FUEL MANAGEMENT. IF THE SLIP SPEED IS BEYOND 10 RPM OR THERE IS SHUDDER DURING TORQUE CONVERTER CLUTCH APPLY THE TORQUE CONVERTER WILL NEED TO BE REPLACED.
Source components: ENGINE.
Source record 10083126 at NHTSANHTSA communication ID: 10083080
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES THAT MAY HAVE LOW OIL PRESSURE MESSAGE. TECHNICIAN MAY ALSO FIND A DIAGNOSTIC TROUBLE CODE P0521 IN THE ENGINE CONTROL MODULE. TECHNICIAN SHOULD FOLLOW ALL PUBLISHED SERVICE INFORMATION DIAGNOSIS. WHEN USING A SCAN TOOL IF THE OIL PRESSURE IS LOW BUT THE OIL PRESSURE AT THE OIL FILTER HOUSING IS CORRECT, TECHNICIAN SHOULD INSPECT THE VALVE LIFTER OIL FILTER FOR DEBRIS/SLUDGE THAT COULD BE RESTRICTING OIL FLOW TO THE OIL PRESSURE SENSOR. TECHNICIAN SHOULD REMOVE THE VALVE LIFTER OIL FILTER AND CLEAN IT. IF THE VALVE LIFTER OIL FILTER CANNOT BE CLEANED REPLACE IT.
Source components: ENGINE AND ENGINE COOLING.
Source record 10083080 at NHTSANHTSA communication ID: 10082865
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATIONAL BULLETIN PROVIDES A PROCEDURE TO REPOSITION THE FRONT SEAT BELT LATCH PLATE FOR CONCERNS REGARDING THE SEAT BELT WEBBING OR LATCH PLATE COMING TWISTED.
Source components: SEAT BELTS.
Source record 10082865 at NHTSANHTSA communication ID: 10082822
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS INFORMATIONAL BULLETIN PROVIDES INFORMATION ON HOW TO TEST A BATTERY AND WHAT IS NEEDED TO WARRANTY A BATTERY.
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY · ENGINE.
Source record 10082822 at NHTSANHTSA communication ID: 10083265
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES THAT ARE FOUND TO HAVE A BACK-UP ALARM INOPERATIVE DURING THE PRE-DELIVERY INSPECTION. ON TRUCKS EQUIPPED WITH THE BACK UP ALARM REGULAR PRODUCTION OPTION CODE (8S3), THE ALARM WILL BE INTENTIONALLY LEFT DISCONNECTED FROM THE ASSEMBLY PLANT. TECHNICIAN WILL REROUTE THE HARNESS AND PLUG IT IN.
Source components: BACK OVER PREVENTION: BACK-UP ALARM · EQUIPMENT:ELECTRICAL.
Source record 10083265 at NHTSANHTSA communication ID: 10082406
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO REPROGRAM THE REAR ENTERTAINMENT MEDIA DISC PLAYER USING A PROVIDED DVD TO CORRECT THE CONDITION OF THE REAR ENTERTAINMENT PLAYER FREEZES ON START UP MENU DUE TO A CALIBRATION CONCERN.
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10082406 at NHTSANHTSA communication ID: 10082863
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS INFORMATIONAL BULLETIN PROVIDES INFORMATION FOR IGNITION KEY, FOB, KEY TAGS AND KEY RINGS CONFIGURATION FOR VARIOUS VEHICLES AND APPLYING A QR CODE STICKER OR BARCODE STICKER TO THE FOB.
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10082863 at NHTSANHTSA communication ID: 10082447
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS INFORMATIONAL BULLETIN EXPLAINS A POSSIBLE NORMAL WHINING NOISE FROM THE BALANCE SHAFT CHAIN IF THE VEHICLE HAS LESS THAN 10,000 MILES ON IT.
Source components: ENGINE AND ENGINE COOLING.
Source record 10082447 at NHTSANHTSA communication ID: 10083200
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES THAT HAVE A MALFUNCTION INDICATOR LAMP WHEN SWITCHING TO COMPRESSED NATURAL GAS. TECHNICIAN WILL FIND A DIAGNOSTIC TROUBLE CODE P2199 SET. TECHNICIAN SHOULD USE PUBLISHED SERVICE INFORMATION DIAGNOSTIC PROCEDURES FOR DIAGNOSTIC TROUBLE CODE P2199. IF THE CONCERN IS NOT RESOLVED USING SERVICE INFORMATION, ENGINEERING IS AWARE OF THE CONCERN AND DON'T ATTEMPT TO REPAIR THIS CONCERN AT THIS TIME.
Source components: ELECTRICAL SYSTEM.
Source record 10083200 at NHTSANHTSA communication ID: 10083140
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN THAT GENERATION 5 ENGINES WITH REGULAR PRODUCTION OPTION CODE L83, L86, OR LV3 MAY HAVE AN OIL CONSUMPTION CONCERN WERE ONE QUART IN 2000 MILES IS BEING USED. DEALER WILL CONFIRM OIL LEVEL WAS PROPERLY CHECKED PER OWNERS MANUAL, AND CHECK THE BOLT TORQUE ON THE VALVE LIFTER OIL MANIFOLD ASSEMBLY, BEFORE YOU CONTACTING GENERAL MOTORS PRODUCT QUALITY CENTER.
Source components: ENGINE.
Source record 10083140 at NHTSANHTSA communication ID: 10083131
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES THE TECHNICIAN WITH STEPS ON HOW TO PROGRAM AN ENGINE CONTROL MODULE WHEN GETTING A SERVICE PROGRAMMING SYSTEM ERROR CODE E4491 OR E4423. IN SOME CASES TECHLINE CUSTOMER SUPPORT CENTER MAY NEED TO BE CONTACTED TO RESOLVE THE ISSUE.
Source components: ELECTRICAL SYSTEM.
Source record 10083131 at NHTSANHTSA communication ID: 10082860
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS INFORMATIONAL BULLETIN PROVIDES INFORMATION ON GM DOES NOT APPROVE THE USE OF CLIPPING TO REPAIR COLLISION DAMAGE TO VEHICLES. GM HAS NOT TESTED OR VALIDATED A CLIPPED VEHICLE REPAIR; THEREFORE, GM CANNOT ENDORSE THIS TYPE OF REPAIR OR CONFIRM THE CRASH PERFORMANCE DURING A SUBSEQUENT COLLISION.
Source components: EQUIPMENT.
Source record 10082860 at NHTSANHTSA communication ID: 10082437
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS INFORMATIONAL BULLETIN PROVIDES INFORMATION ON LOCATING AND RECONNECTING AIRBAG CONNECTORS THAT ARE NOT FULLY SEATED TO CORRECT A CUSTOMER CONCERN OF AN AIRBAG WARNING LAMP ILLUMINATED, OR ONE, OR MORE, AIRBAG DTC(S) SET.
Source components: AIR BAGS.
Source record 10082437 at NHTSANHTSA communication ID: 10083365
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATES NEW MODEL FEATURES OF THE 2016 AND 2017 SILVERADO AND SIERRA EASSIST.
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10083365 at NHTSANHTSA communication ID: 10082861
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO REMOVE THE TRANSPORT MODE ON MESSAGE DISPLAYED IN THE DIC DUE TO VEHICLES SHIPPED OVER LONG DISTANCES OUTSIDE THE U.S. AND CANADA.
Source components: ELECTRICAL SYSTEM.
Source record 10082861 at NHTSANHTSA communication ID: 10082823
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS INFORMATIONAL BULLETIN EXPLAINS THE USE OF DIESEL FUEL ADDITIVES IN AN ENGINE, ARE NOT REQUIRED UNLESS THE CUSTOMER DESIRES ADDITIVES TO PREVENT FUEL CONCERNS DEPENDING ON FUEL OR TEMPERATURE RELATED CONDITIONS.
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL.
Source record 10082823 at NHTSANHTSA communication ID: 10082814
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS INFORMATIONAL BULLETIN PROVIDES INFORMATION TO GM DEALERS ON THE CORRECT CLEANING METHODS WHEN CLEANING ENGINE GASKET SEALING SURFACES.
Source components: ENGINE.
Source record 10082814 at NHTSANHTSA communication ID: 10082422
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS TECHNICAL BULLETIN PROVIDES DIAGNOSTIC TIPS TO HELP CORRECT MULTIPLE CONCERNS REGARDING THE USB PORT BEING INOPERATIVE OR UNABLE TO PLAY MUSIC THROUGH THE USB PORT.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10082422 at NHTSANHTSA communication ID: 10083941
NHTSA source summary · Original PDF not reviewed by Recallfolio
THE BRAKE PEDAL PIVOT NUT ON THESE VEHICLES MAY BECOME LOOSE, CAUSING THE BRAKE PEDAL TO BE LOOSE OR INOPERATIVE. IF THE BRAKE PEDAL BECOMES LOOSE OR INOPERATIVE, THE DRIVER MAY BE UNABLE TO SAFELY STOP THE VEHICLE THROUGH APPLICATION OF THE BRAKE PEDAL, INCREASING THE RISK OF A CRASH. A LOOSE PEDAL MAY ALSO INTERFERE WITH THE ACCELERATOR PEDAL, INCREASING THE RISK OF A CRASH
Source components: SERVICE BRAKES.
Source record 10083941 at NHTSANHTSA communication ID: 10082820
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS INFORMATIONAL BULLETINS PROVIDES INFORMATION ON THE INTAKE MANIFOLD INSPECTION/REPLACEMENT AFTER SERVERE INTERNAL ENGINE DAMAGE.
Source components: ENGINE.
Source record 10082820 at NHTSANHTSA communication ID: 10135433
NHTSA source summary · Original PDF not reviewed by Recallfolio
44120 - Customer Satisfaction Program - Certain vehicles, equipped with an 8-speed automatic transmission, may have a condition in which the 2-3-4-6-8 Clutch Piston is out of specification. Parts as installed exhibited a crack condition as cast after machining. As a result the vehicle could exhibit 1-2 upshift slipping or a flaring condition.
Source components: ENGINE AND ENGINE COOLING.
Source record 10135433 at NHTSANHTSA communication ID: 10135429
NHTSA source summary · Original PDF not reviewed by Recallfolio
52990 - Service Update. Certain vehicles may have a condition where the body seam sealer in the plenum/cowl area is short, allowing a water leak path that runs into the driver side foot well of the vehicle. Reseal plenum with Kent Automotive High Tech Seam Sealer P10200.
Source components: ENGINE AND ENGINE COOLING · STRUCTURE.
Source record 10135429 at NHTSANHTSA communication ID: 10100806
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO REPLACE THE VALVE LIFTER OIL MANIFOLD AND THE LIFTERS TO CORRECT THE CUSTOMERS CONCERN OF ENGINE MISFIRE, TICK NOISE AND MIL ON.
Source components: ENGINE AND ENGINE COOLING.
Source record 10100806 at NHTSANHTSA communication ID: 10100805
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS ENGINEERING INFORMATIONAL BULLETIN IS REQUESTING INFORMATION FROM THE FIELD WITH THE CONDITONS OF A RATTLE NOISE ORIGINATING FROM THE SECOND ROW SEAT.
Source components: SEATS.
Source record 10100805 at NHTSANHTSA communication ID: 10094786
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS ENGINEERING INFORMATIONAL BULLETIN IS ENDING THE NEED FOR INFORMATION FROM THE FIELD OF VEHICLES WITH THE CONDITION OF INTERMITTENT HVAC COOLING ISSUES WHILE DRIVING.
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10094786 at NHTSANHTSA communication ID: 10089108
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO REPROGRAM THE HMI MODULE TO CORRECT A CONDITION OF GPS INOPERATIVE, RED LINE ACROSS GPS INDICATOR OR THE LOCATION IS STUCK IN WARREN MICHIGAN.
Source components: EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).
Source record 10089108 at NHTSANHTSA communication ID: 10089121
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS INFORMATIONAL BULLETIN PROVIDES GUIDANCE TO GM DEALERS WHEN USING GM APPROVED TIRE FORCE VARIATION MEASUREMENT EQUIPMENT.
Source components: EQUIPMENT · TIRES.
Source record 10089121 at NHTSANHTSA communication ID: 10080981
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATES THE PROCEDURE TO THE TECHNICIAN HOW TO REGAIN BLU-RAY/CD/DVD PLAYER FUNCTION ON ALL NEW GENERATION INFOTAINMENT SYSTEMS WITH REGULAR PRODUCTION OPTION CODE U42 OR UWG BLU-RAY PLAYERS. IF THIS CONCERN IS ENCOUNTERED, CYCLE THE CD PLAYER/MEDIA DISC PLAYER FUSE AND RE-EVALUATE THE CONCERN.
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10080981 at NHTSANHTSA communication ID: 10097193
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO REPLACE THE STATOR SHAFT SUPPORT TO CORRECT CUSTOMER CONCERN ON A DELAYED ENGAGEMENT WHEN THE TRANSMISSION IS SHIFTED FROM PARK TO REVERSE OR PARK TO DRIVE AFTER THE VEHICLE HAS BEEN SITTING WITH THE ENGINE OFF DUE TO THE TORQUE CONVERTER DRAINING THE TRANSMISSION FLUID BACK INTO THE TRANSMISSION PAN.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10097193 at NHTSANHTSA communication ID: 10089044
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS INFORMATIONAL BULLETIN PROVIDES INFORMATION ON TRANSMISSIONS WITH HARSH SHIFTS AFTER MILEAGE ACCUMULATION WITHOUT PREVIOUS REPAIRS AND/OR CALIBRATION UPDATES.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10089044 at NHTSANHTSA communication ID: 10074343
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO REPLACE THE STATOR SHAFT SUPPORT TO CORRECT CUSTOMER CONCERN ON A DELAYED ENGAGEMENT WHEN THE TRANSMISSION IS SHIFTED FROM PARK TO REVERSE OR PARK TO DRIVE AFTER THE VEHICLE HAS BEEN SITTING WITH THE ENGINE OFF DUE TO THE TORQUE CONVERTER DRAINING THE TRANSMISSION FLUID BACK INTO THE TRANSMISSION PAN.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10074343 at NHTSANHTSA communication ID: 10081053
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ON THE STEPS TO DIAGNOSE AND REPAIR VEHICLES THAT MAY HAVE ISSUES WERE THE CUSTOMER WILL NEED INCREASED EFFORT TO DEPRESS THE BRAKE PEDAL. TECHNICIAN MAY FIND FLUID IN THE BRAKE BOOSTER AND/OR THE BOOSTER VACUUM LINE. TECHNICIAN WILL NEED TO REPLACE VACUUM PUMP, BRAKE BOOSTER, MASTER CYLINDER, VACUUM PUMP BELT AND THE VACUUM LINE BETWEEN THE BOOSTER AND THE PUMP.
Source components: SERVICE BRAKES · SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES.
Source record 10081053 at NHTSANHTSA communication ID: 10094768
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATIONAL BULLETIN PROVIDES INFORMATION ON A PROCEDURE FOR DIAGNOSING AND REPAIRING VIBRATIONS CAUSED BY THE WHEEL AND TIRE, AXLE COMPONENTS AND/OR PROPELLER SHAFTS.
Source components: ELECTRICAL SYSTEM · STEERING:HYDRAULIC POWER ASSIST:POWER STEERING FLUID · SUSPENSION.
Source record 10094768 at NHTSANHTSA communication ID: 10088863
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS INFORMATIONAL BULLETIN IS A SUPPLEMENT TO THE DURAMAX DIESEL COOLANT SYSTEM FILL AND HEAD GASKET REPLACEMENT PROCEDURE FOUND IN THE SERVICE INFORMATION.
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10088863 at NHTSANHTSA communication ID: 10081323
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN THAT SOME VEHICLES MAY HAVE A DIM DRIVER INFORMATION CENTER WHEN THE INTERIOR OF THE VEHICLE IS HOT FROM A SUN LOAD OR EXTENDED HEATER OPERATION. THE DRIVER INFORMATION CENTER IS DESIGNED TO DIM WITH HIGH TEMPERATURE EXPOSURE. THIS IS DONE TO PROTECT THE DRIVER INFORMATION CENTER FROM DAMAGE.
Source components: ELECTRICAL SYSTEM · EQUIPMENT · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10081323 at NHTSANHTSA communication ID: 10081833
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE ON THE CHECK VALVE INTERNAL TO THE FUEL TANK DUE TO GAS TANK IS HARD TO FILL.
Source components: FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY.
Source record 10081833 at NHTSANHTSA communication ID: 10081200
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN THAT SOME VEHICLES THE HAPTIC SEAT MOTORS CAN BE FELT IN THE SEAT. TECHNICIAN WILL ACCESS BOTH HAPTIC SEAT MOTORS AND ROTATE THE MOTORS FLAT, AND THEN REINSTALL THEM BACK INTO THE SEAT CUSHION. THIS WILL HELP IMPROVE THE COMFORT OF THE SEAT CUSHION.
Source components: SEATS.
Source record 10081200 at NHTSANHTSA communication ID: 10082009
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS TECHNICAL BULLETIN PROVIDES REPAIR INFORMATION ON CORRECTING A WATER LEAK INTO THE VEHICLE CABIN, CAUSED BY WATER OVERRUNNING THE POWER REAR SLIDER WINDOW CHANNEL.
Source components: STRUCTURE:FRAME AND MEMBERS · VISIBILITY:POWER WINDOW DEVICES AND CONTROLS.
Source record 10082009 at NHTSANHTSA communication ID: 10081241
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ON HOW TO DIAGNOSE AND REPAIR VEHICLE THAT MAY HAVE A "CHECK TRAILER WIRING" OR "SERVICE TRAILER BRAKE SYSTEM MESSAGE ON THE DRIVER INFORMATION CENTER WHEN A TRAILER IS CONNECTED TO THE VEHICLE. DIAGNOSTIC TROUBLE CODE C1114 SET IN THE CHASSIS CONTROL MODULE. CHASSIS CONTROL MODULE HAS TO DETERMINE THE TYPE OF TRAILER BRAKE SYSTEM THAT IS BEING USED. THE CHASSIS CONTROL MODULE CAN BE SENSITIVE TO A VARIETY OF TRAILER WIRING ISSUES. THE TECHNICIAN WILL NEED TO MAKE A TRAILER TESTER USING ELECTRIC TRAILER BRAKE MAGNETS AND 7-WAY TRAILER CONNECTOR TO DETERMINE IF IT IS A VEHICLE OR TRAILER ISSUE. IF THE CONCERN IS NOT DUPLICATED WITH THE TESTER INSTALLED, THE VEHICLE IS OPERATING CORRECTLY AND THE FOCUS SHOULD BE ON THE TRAILER WIRING OR 7 WAY CONNECTOR.
Source components: ELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL.
Source record 10081241 at NHTSANHTSA communication ID: 10081043
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ON HOW TO DIAGNOSE AND REPAIR VEHICLES THAT MAY HAVE RATTLE OR TICKING NOISE THAT IS LOUDER INSIDE THE VEHICLE THAN OUTSIDE. THE NOISE MAY ALSO SOUND LIKE A LIFTER TICK. IF THE NOISE IS HEARD BEST AT THE FUEL LINE AND THE SOUND WILL BE REAL LOUD WITH A STETHOSCOPE. THE FUEL LINE WILL NEED TO BE REPLACED.
Source components: ENGINE · FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP · FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS.
Source record 10081043 at NHTSANHTSA communication ID: 10081022
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN THAT ,WHEN TESTING ANY CIRCUIT FOR OPEN OR RESISTANCE, IT IS IMPERATIVE THAT ALL RELATED TERMINAL PIN FIT AND TENSION BE CHECKED WHEN THE TEST STEPS REQUIRE DISCONNECTION OF THE CONNECTOR OR COMPONENT, PRIOR TO ANY COMPONENT REPLACEMENT. ALWAYS USE THE RECOMMENDED TERMINAL TEST TOOL DURING THESE TESTS.
Source components: ELECTRICAL SYSTEM.
Source record 10081022 at NHTSANHTSA communication ID: 10094784
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS ENGINEERING INFORMATIONAL BULLETIN IS ENDING THE NEED FOR INFORMATION FROM THE FIELD OF VEHICLES WITH THE CONDITION OF BANG OR LOUD NOISE WITH NO FORWARD (DRIVE) OR REVERSE RANGES.
Source components: POWER TRAIN:MANUAL TRANSMISSION.
Source record 10094784 at NHTSANHTSA communication ID: 10080702
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ON HOW TO DIAGNOSE AND REPAIR VEHICLES THAT MAY HAVE DIAGNOSTIC TROUBLE CODE P06DD OR NO OR LOW OIL PRESSURE. TECHNICIAN WILL REPLACE TIMING CHAIN TENSIONER GUIDE. IF OIL PUMP FACE IS DAMAGED AND OR WORN THRU REPLACE OIL PUMP. INSPECT BEARINGS FOR DAMAGE WEAR DUE TO DEBRIS FROM OIL PUMP.
Source components: ENGINE.
Source record 10080702 at NHTSANHTSA communication ID: 10089247
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS INFORMATIONAL BULLETIN PROVIDES INFORMATION ON THE PROPER USE OF FLOOR MATS.
Source components: EQUIPMENT.
Source record 10089247 at NHTSANHTSA communication ID: 10080700
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN THAT THE ALLISON 6 SPEED AUTOMATIC TRANSMISSION ASSEMBLY REGULAR PRODUCTION OPTION CODE MW7 BEEN PLACED ON RESTRICTION THROUGH GENERAL MOTORS PRODUCT QUALITY CENTER. DEALER WILL NEED TO CALL GENERAL MOTORS PRODUCT QUALITY CENTER FOR FURTHER ASSISTANCE.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10080700 at NHTSANHTSA communication ID: 10097195
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO INSPECT THE AIR BOX AND AIR FILTER SEAL AND REPLACE IF NECESSARY TO CORRECT A CUSTOMER CONCERN THAT THE MALFUNCTION INDICATOR LIGHT (MIL) IS ILLUMINATED DUE TO EXCESSIVE SAND AND/OR DEBRIS ENTERING THE AIR FILTER BOX AND BYPASSING THE SEAL OF THE AIR FILTER CAUSING DAMAGE TO THE HO2 SENSOR AND THE CATALYTIC CONVERTER TO BECOME BLOCKED WITH SAND AND DEBRIS PARTICLES.
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10097195 at NHTSANHTSA communication ID: 10081866
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS INFORMATIONAL BULLETIN INFORMS THE TECHNICIANS ON VEHICLES BUILT WITH DIFFERENT HMI MODULES FOR PROPPER REPLACEMENT.
Source components: ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10081866 at NHTSANHTSA communication ID: 10080686
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ON THE STEPS TO DIAGNOSE AND REPAIR VEHICLES THAT MAY HAVE AN INTERMITTENT "CHECK TRAILER WIRING" OR "SERVICE TRAILER BRAKE" MESSAGE ON THE DRIVER INFORMATION CENTER. TECHNICIAN WILL INSPECT AND CLEAN THE GROUND WIRE (NORMALLY WHITE WIRE) CONNECTION ON THE TRAILER SIDE OF THE 7-PIN CONNECTOR. INSPECT THAT THE WIRES INSIDE THE TRAILER SIDE CONNECTOR ARE CLEAN AND SECURELY FASTENED. IF THE VEHICLES 7-WAY CONNECTOR SOCKET TERMINALS ARE DEFORMED OR HAVE EXCESSIVE WEAR, IT WILL BE NECESSARY TO REPLACE THE TRUCK SIDE CONNECTOR FROM GENERAL MOTORS CUSTOMER CARE AND AFTERSALES ALONG WITH THE TRAILER'S 7-WAY CONNECTOR PLUG.
Source components: ELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL · ELECTRICAL SYSTEM:WIRING.
Source record 10080686 at NHTSANHTSA communication ID: 10080684
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN THE STEPS NEEDED TO DIAGNOSE AND REPAIR VEHICLES WITH A ROUGH IDLE AND/OR VIBRATION AT IDLE IN DRIVE. THIS CONDITION WILL NOT BE PRESENT IN PARK, OR NEUTRAL. THIS CONCERN MAY BE CAUSED BY GROUND OUT WITHIN THE ONE OR BOTH ENGINE MOUNTS. TECHNICIAN WILL USE CH-51450-A (PICO OSCILLOSCOPE) TO MEASURE THE VIBRATION DISTURBANCE. IF THE VIBRATION CONCERN IS E1.5 IN THE HORIZONTAL / LATERAL DIRECTION WITH PICO SENSOR MOUNTED IN SEAT TRACK AS INDICATED CONTINUE WITH STEPS TO REDUCE THE AMPLITUDE OF THE VIBRATION BY ADDING SPACERS IN KEY LOCATIONS TO REDUCE GROUND OUT WITHIN THE ENGINE MOUNTS. THE 6.2L ENGINE HAS A CHARACTERISTIC E1 WHICH CAN BE FELT, AND MAY BE DESCRIBED AS A LOPEY IDLE. DO NOT CONFUSE 6.2L E1 CHARACTERISTIC (NOT CAUSED BY MOUNT GROUND-OUT), WITH E1.5 NORMAL IDLE CHARACTERISTICS BEING TRANSMITTED INTO THE TRUCK VIA GROUND-OUT THRU THE ENGINE MOUNTS. IF MEASURING HIGH AT THE SEAT TRACK 12 MG OR GREATER; REPLACEMENT OF THE ENGINE MOUNTS SHOULD HELP REDUCE THE AMPLITUDE OF THE VIBRATION. IF THE DISTURBANCE MEASURES AT THE SEAT TRACK AS E1.5 LATERAL IN THE RANGE OF APPROXIMATELY 2.5 - 8 MG USING A TRI-AXIS SENSOR. THEN PLACE TRI-AXIS PICO SENSOR ON THE INBOARD SEAT TRACK FORWARD-MOST LOCATION TO RECORD MEASUREMENT OF THE ROUGH IDLE VIBRATION CONCERN. WITH THE HEATER-VENT-AIR CONDITIONING ON PERFORM SEVERAL SHORT HEAVY LAUNCH EVENTS FROM STOP TO STOP TO BRING THE TEMPERATURES BACK UP WHILE ATTEMPTING TO RE-CREATE THE ROUGH IDLE VIBRATION IN DRIVE WITH PICO SENSOR PLACED ON INBOARD SEAT TRACK; WHILE THE VIBRATION IS ACTIVE RECORD PICO READING. THIS METHOD SEEMS TO PROVIDE BETTER RESULTS THAN EXTENDED TEST DRIVES. IF THE PICO READING FOR E1.5, WITH VIBRATION ACTIVE, AT SPECIFIED SEAT TRACK LOCATION MEASURES CLOSE TO 2MG OR LESS USE SERVICE INFORMATION TO DIAGNOSE ROUGH IDLE / VIBRATION.
Source components: ENGINE.
Source record 10080684 at NHTSANHTSA communication ID: 10078432
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO INSPECT THE AIR BOX AND AIR FILTER SEAL AND REPLACE IF NECESSARY TO CORRECT A CUSTOMER CONCERN THAT THE MALFUNCTION INDICATOR LIGHT (MIL) IS ILLUMINATED DUE TO EXCESSIVE SAND AND/OR DEBRIS ENTERING THE AIR FILTER BOX AND BYPASSING THE SEAL OF THE AIR FILTER CAUSING DAMAGE TO THE HO2 SENSOR AND THE CATALYTIC CONVERTER TO BECOME BLOCKED WITH SAND AND DEBRIS PARTICLES.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10078432 at NHTSANHTSA communication ID: 10097194
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO REPROGRAM THE RADIO TO CORRECT A CUSTOMER CONCERN REGARDING A BUZZ OR STATIC NOISE CAUSED BY INTERNAL SOFTWARE.
Source components: ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10097194 at NHTSA