2015 Ford TRANSIT Manufacturer communications & TSBs.Page 2
Original record summaries, dates and identifiers for this model-year. Records 101–200 of 203, ordered newest first. Dated records on this page: Mar 1, 2015–Oct 23, 2018.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Oct 23, 2018Service Bulletin/Repair Instructions
TSB 18-2321
NHTSA communication ID: 10148711
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2018 Transit vehicles built on or before 24-Jul-2018 may exhibit various drivability concerns including difficulty starting, misfires and/or an illuminated MIL with diagnostic trouble codes (DTCs) P00BD, P1247, P1548, P061B, P2195, P2198, P2196, P2197, P0171, P0172, P0174, P0175, P0131 and/or P162F stored in the powertrain control module (PCM). This may be due to undesired water entry into the engine compartment directly over powertrain components. Follow the Service Procedure steps to correct the condition.
Source components: ELECTRICAL SYSTEM · ENGINE · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2018 Transit vehicles equipped with a 3.5L or 3.7L engine may exhibit a lack of heat or uneven heat from side to side. This condition may be due to deposits from the engine coolant trapped in the heater core. Follow the Service Procedure steps to correct the condition.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2015-2019 Transit vehicles equipped with dual rear wheels (DRWs) have a high mount rear marker lamp that does not illuminate with the stop lamps. This lamp assembly may appear to be a stop lamp but is intended to illuminate with the parking lamps only. This information is available in Workshop Manual Section 417-01.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2019 Transit vehicles may have unique accessory drive noise characteristics. Engineering review of warranty returned belt tensioners has not identified an out of specification part, nor have abnormal sounds been recreated during on-vehicle evaluations with warranty returned tensioners. Before attempting a repair for an accessory drive system noise, compare the sound to a like Transit vehicle in similar RPM and temperature conditions. If the sound is not characteristic, use chassis ears to help isolate the source of the noise. If tensioner replacement is deemed necessary, use the Report a Vehicle Concern link at the bottom of the vehicle's OASIS screen and submit a detailed Global Concern Report highlighting the specific conditions when the noise was observed.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2018 Transit may exhibit a front wheel bearing type noise or DTCs C0031 and/or C034 in the anti-lock brake system (ABS) module. If the vehicle exhibits a wheel bearing noise and/or DTCs C0031 and/or C0034, remove the front wheel speed sensor (WSS). Refer to Workshop Manual (WSM), Section 206-09. Using a shop rag, clean any debris from the sensor body as well as the back side of the bearing. If the noise is gone, use the Report a Vehicle Concern link at the bottom of the OASIS report and fill out the form. Monitor OASIS for updates. If the noise or DTCs C0031 and/or C0034 is still present, continue with normal diagnostics. To assist with investigation use the Report a Vehicle Concern link at the bottom of the OASIS report and fill out the form. Monitor OASIS for updates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2018 Transit vehicles equipped with a 3.2L diesel engine may exhibit "Drive To Clean" maintenance messages and/or an illuminated malfunction indicator lamp (MIL) on with DTC P2459, P2463, and/or P246C. Vehicles may also exhibit frequent automatic exhaust regeneration attempts. This may be due to vehicles being used in a stationary or off-highway, low speed applications. If automatic regeneration attempts are unsuccessful, these symptoms may be a result of soot accumulation in the diesel particulate filter (DPF). These vehicles may benefit from operator commanded regeneration (OCR) capability so complete regeneration cycles may be performed in a stationary setting. Information only, follow the Service Procedure steps to correct the condition.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE) · FUEL SYSTEM, DIESEL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Replacement engines may have a fuel injection pump sprocket that does not include a keyway slot. It is acceptable to utilize the original fuel injection pump if it has a keyway slot. Timing the injection pump is not necessary. Refer to Workshop Manual (WSM), Section 303-04C removal and installation fuel injection pump and disregard align the sprocket key wording.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2018 Transit vehicles equipped with the Auxiliary Heater / A/C Prep Package 62C are built specifically for A/C system modification. This can be identified on the Professional Technician Society (PTS) website by using vehicle identification number (VIN) > OASIS tab > Vehicle Information > Additional information will be shown as: GZBAC - heater/A/C prep pack. The upfitter who adds their rear A/C components is responsible for filling their system and specifying the new refrigerant charge level. Do not submit warranty claims for insufficient refrigerant charge unless a defective Ford part or component is identified as the causal part. Consult the upfitter who performed the modification if refrigerant charge level is in question or a defect is present within the add-on system.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2018 Transit vehicles equipped with a 3.2L diesel engine may exhibit "Drive To Clean" maintenance messages and/or an illuminated malfunction indicator lamp (MIL) on with DTC P2459, P2463, and/or P246C. Vehicles may also exhibit frequent automatic exhaust regeneration attempts. This may be due to vehicles being used in a stationary or off-highway, low speed applications. If automatic regeneration attempts are unsuccessful, these symptoms may be a result of soot accumulation in the diesel particulate filter (DPF). These vehicles may benefit from operator commanded regeneration (OCR) capability so complete regeneration cycles may be performed in a stationary setting. Follow the Service Procedure steps to correct the condition.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2013-2018 F-150, 2015-2018 Transit/Expedition, and 2015-2017 Navigator vehicles equipped with a 3.5L EcoBoost engine with greater than 20,000 miles may exhibit a tick type noise from the cylinder block area. This noise may be caused by a cracked piston skirt. The noise can be isolated to a cylinder using a stethoscope or other suitable listening device. Canceling the affected cylinder will reduce or eliminate the noise. If the noise is isolated to a specific cylinder, it is recommended to replace the short block. If the noise cannot be isolated using the methods described, refer to the Workshop Manual (WSM) for diagnosis. A cracked piston skirt does not result in metal contamination of the engine or any related cylinder head damage. Prior approval for short block replacement is not required under new vehicle limited warranty coverage.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2013-2018 F-150, 2015-2018 Transit/Expedition, and 2015-2017 Navigator vehicles equipped with a 3.5L EcoBoost engine with greater than 20,000 miles may exhibit a tick type noise from the cylinder block area. This noise may be caused by a cracked piston skirt. The noise can be isolated to a cylinder using a stethoscope or other suitable listening device. Canceling the affected cylinder will reduce or eliminate the noise. If the noise is isolated to a specific cylinder, it is recommended to replace the short block. If the noise cannot be isolated using the methods described, refer to the Workshop Manual (WSM) for diagnosis. A cracked piston skirt does not result in metal contamination of the engine or any related cylinder head damage. Short block replacement does not require prior approval.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2018 Transit vehicles equipped with a 3.5L or 3.7L engine may exhibit a lack of heat or uneven heat from side to side. This condition may be due to deposits from the engine coolant trapped in the heater core. Follow the Service Procedure steps to correct the condition.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
As noted in FSA 17S34, loss of instrument cluster display can result from wiring corrosion and damage to the Trailer Relay Module on affected Transit vehicles. Complete the 17S34 service action as described prior to addressing any other customer reported symptoms. Vehicles that exhibit related wire harness damage must have the wire harness repaired or replaced prior to performing any additional diagnostic testing to avoid improperly condemning instrument clusters or other electronic modules.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2017 Transit vehicles may fail to program the BCM following replacement. To repair, follow BCM installation procedures in Workshop Manual (WSM), Section 419-10 using Integrated Diagnostic System (IDS) or Ford J2534 Diagnostic Software (FJDS) release 109.02 or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained at www.motorcraftservice.com. For claiming this programming procedure, use causal part 15604 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Replacing the original equipment SYNC/Navigation system with either an aftermarket SYNC/Navigation kit or modifying original SYNC/Navigation parts to provide additional features is not recommended nor supported on any Ford, Mercury or Lincoln vehicle. Only approved Genuine Ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems. If you suspect a system has been modified, the following resources can be used to verify original equipment: Monroney Label (Window Sticker), Professional Technician Society (PTS) OASIS tab select SYNC or HVBOM. For Genuine Ford accessories use: PTS Workshop Tab select Dealer Installed Accessory or Accessory Installation.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2011-2018 Super Duty and 2015-2018 Transit vehicles equipped with diesel engines may exhibit diagnostic trouble code (DTC) U0100 stored in various modules after running a continuous memory diagnostic trouble code (CMDTC) test or network test using Integrated Diagnostic System (IDS). If there are no observable symptoms related to a loss of communication with the PCM and the DTC is not set when running individual on-demand self-tests of the modules, do not attempt any repairs at this time.
NHTSA source summary · Original PDF not reviewed by Recallfolio
The procedure to program keys on 2015-2018 Transit vehicles depends on if the vehicle is equipped with the Passive Anti-Theft System (PATS). Keys for PATS and non-PATS vehicles look the same, there is no visual difference. Vehicles with PATS have a plastic ring around the ignition lock cylinder and transponder. On the OASIS page, PATS vehicles can be identified by clicking on the Additional Information link and using the search function (Ctrl + F) to find IMMOBILIZER. Vehicles with LESS ENG IMMOBILIZER THEFT SYS do not have PATS. Refer to Work Shop Manual (WSM), Section 501-14 for programming keys on non PATS vehicles and Section 419-01B for programming keys on PATS vehicles. When performing the PATS key procedure, both PATS and Remote Keyless Entry codes are programmed simultaneously.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2017 Transit vehicles may fail to program the BCM following replacement. To repair, follow BCM installation procedures in Workshop Manual (WSM), Section 419-10 using Integrated Diagnostic System (IDS) or Ford J2534 Diagnostic Software (FJDS) release 108.06 or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained at www.motorcraftservice.com. Disregard DTC U0264 in the BCM and DTC U0010 in the Image Processing Module B (IPMB) if no observable rear parking aid camera concerns are present. For claiming this programming procedure, use causal part 15604 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2018 F-Super Duty/2016-2018 F650-750 with 6.7L diesel engines and 2015-2018 Transit with 3.2L diesel engines may exhibit a MIL on with diagnostic trouble code (DTC) P206C in the powertrain control module (PCM). This may be due to incorrect diesel exhaust fluid (DEF) concentration. Prior to performing Powertrain Control/Emissions Diagnosis (PC/ED) pinpoint test RJ, confirm DEF concentration using IDS to monitor REDUCT_CONC_MES. This PID reading may fluctuate between 31% and 34% indicating DEF concentration is correct. A concentration reading below 28% will set P206C and cause vehicle derate. This reading may also be checked using Central Tools Refractometer (CEN3R201) which should indicate a similar percentage as the PID. Low concentration of DEF is not a warrantable condition. If low concentration is suspected, drain fluid and replace with known good DEF before replacing any parts.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2017 Transit vehicles may fail BCM installation programming when attempting to install a new BCM. The Technical Assistance Center and engineering teams are currently working to resolve this concern. If module programming is unsuccessful, do not attempt further repairs. Do not perform repeated key cycles or starting attempts. 30 key cycles on a blank module may result in a non-recoverable BCM when the programming concern is resolved. Monitor OASIS for updates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2010-2018 various vehicles equipped with SYNC or SYNC 3 may not function when attempting to find or use the Spotify app via AppLink. As of an update released on 1/15/2018 Spotify will no longer be supporting their AppLink integration. No repair attempts should be attempted to correct this concern.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017 F-Super Duty, 2016-2017 F650-750 equipped with 6.7L diesel engines and 2015-2017 Transit equipped with 3.2L diesel engines may exhibit a MIL on with diagnostic trouble code (DTC) P206C stored in powertrain control module(PCM). This may be due to incorrect diesel exhaust fluid (DEF) concentration. Prior to performing Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test RJ, ensure DEF concentration is checked using Central Tools Refractometer tool number CEN3R201 and if DEF contamination is suspected use the Rotunda Hydrocarbon Test Kit tool number 328-480508.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017 F-Super Duty, 2016-2017 F650-750 equipped with 6.7L diesel engines and 2015-2017 Transit equipped with 3.2L diesel engines may exhibit a MIL on with diagnostic trouble code (DTC) P206C stored in powertrain control module(PCM). This may be due to incorrect diesel exhaust fluid (DEF) concentration. Prior to performing Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test RJ, ensure DEF concentration is checked using Central Tools Refractometer tool number CEN3R201 and if DEF contamination is suspected use the Rotunda Hydrocarbon Test Kit tool number 328-480508.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2018 Transit vehicles equipped with a 3.2L Duratorq-TDCi may exhibit an engine oil leak from the rear crankshaft seal. The Workshop Manual (WSM), Section 303-01 has been updated to include the correct location to apply sealant to the rear crankshaft seal. When repairing a rear crankshaft oil leak condition, a 3 mm (0.120 in) bead of Motorcraftù Silicone Gasket and Sealant TA-30 (WSE-M4G323-A4) or equivalent must be applied to the joints where the ladder frame meets the engine block. Failure to follow the updated procedure in WSM, Section 303-01 may result in a repeat oil leak at the rear of the engine.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2018 Transit vehicles equipped with a 3.2L Duratorq-TDCi may exhibit an engine oil leak from the rear crankshaft seal. The Workshop Manual (WSM), Section 303-01 has been updated to include the correct location to apply sealant to the rear crankshaft seal. When repairing a rear crankshaft oil leak condition, a 3 mm (0.120 in) bead of Motorcraftù Silicone Gasket and Sealant TA-30 (WSE-M4G323-A4) or equivalent must be applied to the joints where the ladder frame meets the engine block. Failure to follow the updated procedure in WSM, Section 303-01 may result in a repeat oil leak at the rear of the engine.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2018 F-150, Mustang and Transit vehicles built on or before 01-Dec-2017 may have a concern of no airflow from the climate control vents. This may be caused by a seized or sticking A/C clutch. This can be repaired by replacing only the A/C clutch (19D786/19D784). The compressor assembly (19703) may not be required. Refer to Workshop Manual, Section 412-00 for A/C clutch removal. It may be necessary to lightly tap around the stuck area of the clutch with a rubber mallet to free it from the pulley for removal. Refer to applicable labor operations from Section 11 of the SLTS maunual when replacing the A/C clutch.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2018 F-150, Mustang and Transit vehicles built on or before 01-Dec-2017 may have a concern of no airflow from the climate control vents. This may be caused by a seized or sticking A/C clutch. This can be repaired by replacing only the A/C clutch (19D786/19D784). The compressor assembly (19703) may not be required. Refer to Workshop Manual, Section 412-00 for A/C clutch removal. It may be necessary to lightly tap around the stuck area of the clutch with a rubber mallet to free it from the pulley for removal. Refer to applicable labor operations from Section 11 of the SLTS maunual when replacing the A/C clutch.
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2015-2018 Transit vehicles ordered with a keyless entry keypad arrive with the Ford Accessory keypad installed and programmed. Vehicles built prior to late January 2017 will have a cardboard box containing a master keycode card and personal entry code programming instructions stowed in the vehicles driver door pocket. Vehicles built after late January 2017 will have the cardboard box containing the card and instructions already stowed in the glove box. The master keycode card and programming instructions must be placed along with the other owner literature in the glovebox, for future reference by the vehicle owner. Certain U.S. dealer employees can retrieve lost keypad codes via FMCDealer.com - Parts and Service tab - Parts Product Line Information - Accessories - Keys/Entry Devices.
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2015-2018 Transit vehicles ordered with a keyless entry keypad arrive with the Ford Accessory keypad installed and programmed. Vehicles built prior to late January 2017 will have a cardboard box containing a master keycode card and personal entry code programming instructions stowed in the vehicles driver door pocket. Vehicles built after late January 2017 will have the cardboard box containing the card and instructions already stowed in the glove box. The master keycode card and programming instructions must be placed along with the other owner literature in the glovebox, for future reference by the vehicle owner. Certain U.S. dealer employees can retrieve lost keypad codes via FMCDealer.com - Parts and Service tab - Parts Product Line Information - Accessories - Keys/Entry Devices.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2018 Transit vehicles may exhibit front seat safety belts that do not extend or retract properly or may exhibit an abnormal noise. Verify if the vehicle has been modified, in particular if a bulkhead partition between the front seats and cargo area has been added to the vehicle. Fasteners or holes in the lower b-pillar are indicators that the seat belt retractor mechanism could have been compromised. If diagnostics lead to retractor replacement, inspect for drill or screw holes in the retractor housing. Damage to the seat belt retractor caused by a vehicle modifier is not warrantable.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2018 Transit vehicles may exhibit front seat safety belts that do not extend or retract properly or may exhibit an abnormal noise. Verify if the vehicle has been modified, in particular if a bulkhead partition between the front seats and cargo area has been added to the vehicle. Fasteners or holes in the lower b-pillar are indicators that the seat belt retractor mechanism could have been compromised. If diagnostics lead to retractor replacement, inspect for drill or screw holes in the retractor housing. Damage to the seat belt retractor caused by a vehicle modifier is not warrantable.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2017 Transit vehicles equipped with a 3.5L or 3.7l gasoline engine may exhibit an engine overheat condition or poor A/C cooling due to one or more of the 3 cooling fan fuses being open. If any one of the Battery Junction Box (BJB) fuses F30, F31, or F8 are open, replace F8 from a 20 amp to a 30 amp fuse (6E5Z-14526-BA), and service the F30 and F31 40 amp fuses (6E5Z-14526-CA) as needed. The wiring diagram has been updated. Failure to replace an open F8 with a 30amp fuse will cause F30 and F31 to open over time. Claim using causal part 9K499 if no other root cause is identified. Use applicable labor ops from section 10 of the SLTS manual for fuse replacement.
NHTSA source summary · Original PDF not reviewed by Recallfolio
When replacing a 2015-2018 Transit 3.2L Duratorq-TDCi engine assembly or block, two new transmission locator dowel pins (W703519 or W718670) must be installed. This information is available in Workshop Manual, Section 303-01C. The parts catalog also specifies to order the dowels when ordering an engine. Failure to install dowels pins will prevent proper engine to transmission alignment resulting in a cracked flexplate and/or crankshaft position sensor damage. Per Warranty and Policy, damage resulting from an incomplete or improper repair is not warrantable.
Source components: ENGINE · EQUIPMENT · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles may exhibit a no start condition with an illuminated malfunction indicator lamp (MIL) and a DTC P161A after PCM replacement. This may be due to the parameter reset procedure not being properly completed. To clear this DTC, use the Ford Integrated Diagnostic System (IDS) service tool or Ford J2534 Diagnostic Software, select - Toolbox - Body - Security - PATS Functions - Parameter Reset. Follow the on-screen instructions to complete the procedure. This procedure will transfer the existing Key ID information between the modules without the need of having 2 programmed PATS keys present. There is no need to program keys when the PCM is going to be replaced. Additional information can be found in the Workshop Manual (WSM), Section 419-01. Missing or lost keys are not warrantable.
Source components: ELECTRICAL SYSTEM · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017 F-Super Duty/2016-2017 F650-750 equipped with 6.7L diesel engines and 2015-2017 Transit equipped with 3.2L diesel engines may exhibit a MIL on with diagnostic trouble code (DTC) P206C stored in powertrain control module(PCM). This may be due to incorrect diesel exhaust fluid (DEF) concentration. Prior to performing Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test RJ, ensure DEF concentration is checked using Central Tools Refractometer tool number CEN3R201 and if DEF contamination is suspected use the Rotunda Hydrocarbon Test Kit tool number 328-480508.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2018 Transit vehicles may have unique accessory drive noise characteristics. Engineering review of warranty returned belt tensioners has not identified an out of specification part, nor have abnormal sounds been recreated during on-vehicle evaluations with warranty returned tensioners. Before attempting a repair for an accessory drive system noise, compare the sound to a like Transit vehicle in similar RPM and temperature conditions. If the sound is not characteristic, use chassis ears to help isolate the source of the noise. If tensioner replacement is deemed necessary, use the Report a Vehicle Concern link at the bottom of the vehicle's OASIS screen and submit a detailed Global Concern Report highlighting the specific conditions when the noise was observed.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2013-2017 F-Super Duty/2015-2017 Transit/2016-2017 F650-750 vehicles equipped with a diesel engine may exhibit DTC P207F and/or P20EE (Reductant Quality Performance) in the powertrain control module (PCM). When repairing DTC P207F or P20EE, refer to the online version of the powertrain control/emission diagnostic (PC/ED) manual for the latest diagnostics. The pinpoint test RD and diagnostic trouble code chart have been updated in section 4 and 5 for DTC P207F and P20EE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2015-2018 Transit vehicles equipped with dual rear wheels (DRWs) have a high mount rear marker lamp that does not illuminate with the stop lamps. This lamp assembly may appear to be a stop lamp but is intended to illuminate with the parking lamps only. This information is available in Workshop Manual Section 417-01.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2018 Transits may exhibit a lack of airflow from the front climate control system cabin vents in fresh air mode. This concern can be due to improper installation of the hood vent air duct plug. The correct location for the plug is on the left side hood opening per the Workshop Manual (WSM), Section 501-02.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2017 Transit vehicles may exhibit front seat safety belts that do not extend or retract properly or may exhibit an abnormal noise. Verify if the vehicle has been modified, in particular if a bulkhead partition between the front seats and cargo area has been added to the vehicle. Fasteners or holes in the lower b-pillar are indicators that the seat belt retractor mechanism could have been compromised. If diagnostics lead to retractor replacement, inspect for drill or screw holes in the retractor housing. Damage to the seat belt retractor caused by a vehicle modifier is not warrantable.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2013-2016 F-Super Duty/2015-2017 Transit/2016-2017 F650-750 vehicles equipped with a diesel engine may exhibit DTC P207F and/or P20EE (Reductant Quality Performance) in the powertrain control module (PCM). When repairing DTC P207F or P20EE, refer to the online version of the powertrain control/emission diagnostic (PC/ED) manual for the latest diagnostics. The pinpoint test RD and diagnostic trouble code chart have been updated in section 4 and 5 for DTC P207F.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2015-2017 TRANSIT VEHICLES EQUIPPED WITH DUAL REAR WHEELS (DRWS) HAVE A HIGH MOUNT REAR MARKER LAMP THAT DOES NOT ILLUMINATE WITH THE STOP LAMPS. THIS LAMP ASSEMBLY MAY APPEAR TO BE A STOP LAMP BUT IS INTENDED TO ILLUMINATE WITH THE PARKING LAMPS ONLY. THIS INFORMATION IS AVAILABLE IN WORKSHOP MANUAL SECTION 417-01.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME 2015-2017 TRANSIT VEHICLES BUILT ON OR BEFORE 17-OCT-2016, EQUIPPED WITH A 3.2L ENGINE, AND WITH LOW TIME IN SERVICE (LESS THAN 8,000 KM (5,000 MILES)) MAY EXHIBIT AN OIL LEAK FROM AREAS SUCH AS THE CRANKSHAFT FRONT SEAL, CRANKSHAFT REAR SEAL, OR FUEL INJECTION PUMP DRIVE ACCESS COVER. THESE EARLY OIL LEAKS MAY BE CAUSED BY HIGH CRANKCASE PRESSURE DUE TO AN IMPROPERLY MOLDED OIL SEPARATOR IN THE VALVE COVER. IN ADDITION TO REPAIRING THE OIL LEAK, INSTALL A NEW VALVE COVER. FOR CLAIMING, USE CAUSAL PART 6K271 AND APPLICABLE LABOR OPERATIONS IN SECTION 06 OF THE SERVICE LABOR TIME STANDARDS (SLTS) MANUAL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME 2015-2017 TRANSIT VEHICLES MAY HAVE UNIQUE ACCESSORY DRIVE NOISE CHARACTERISTICS. ENGINEERING REVIEW OF WARRANTY RETURNED BELT TENSIONERS HAS NOT IDENTIFIED AN OUT OF SPECIFICATION PART, NOR HAVE ABNORMAL SOUNDS BEEN RECREATED DURING ON-VEHICLE EVALUATIONS WITH WARRANTY RETURNED TENSIONERS. BEFORE ATTEMPTING A REPAIR FOR AN ACCESSORY DRIVE SYSTEM NOISE, COMPARE THE SOUND TO A LIKE TRANSIT VEHICLE IN SIMILAR RPM AND TEMPERATURE CONDITIONS. IF THE SOUND IS NOT CHARACTERISTIC, USE CHASSIS EARS TO HELP ISOLATE THE SOURCE OF THE NOISE. IF TENSIONER REPLACEMENT IS DEEMED NECESSARY, USE THE REPORT A VEHICLE CONCERN LINK AT THE BOTTOM OF THE VEHICLE'S OASIS SCREEN AND SUBMIT A DETAILED GLOBAL CONCERN REPORT HIGHLIGHTING THE SPECIFIC CONDITIONS WHEN THE NOISE WAS OBSERVED.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME 2015 TRANSIT VEHICLES BUILT ON OR BEFORE 30-MAR-2015 MAY EXHIBIT VARIOUS DRIVABILITY CONCERNS INCLUDING DIFFICULTY STARTING, MISFIRES AND/OR AN ILLUMINATED MALFUNCTION INDICATOR LAMP (MIL) WITH DIAGNOSTIC TROUBLE CODE (DTC) P00BD, P1247, P1548, P061B, P2195, P2198, P2196, P2197, P0171, P0172, P0174, P0175, P0131 AND/OR P162F STORED IN THE POWERTRAIN CONTROL MODULE (PCM) MEMORY. THIS MAY BE DUE TO UNDESIRED WATER ENTRY INTO THE ENGINE COMPARTMENT DIRECTLY OVER POWERTRAIN COMPONENTS. FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME 2015-2017 TRANSIT VEHICLES MAY EXHIBIT TRIM ISSUES THAT ARE NOT WARRANTABLE BY FORD. TRANSIT VEHICLES ARE EQUIPPED WITH INTERIOR AND EXTERIOR TRIM WHICH ARE NOT PAINTED AND HAVE A GRAINED APPEARANCE. CONCERNS RELATED TO TRIM PAINT PEELING, OVERSPRAY, FADING, OR DISCOLORING, ARE LIKELY THE RESULT OF MODIFICATION. MODIFIED VEHICLES MAY BE IDENTIFIED BY AFTERMARKET BADGING, LABELS NEAR THE SAFETY DECAL IN THE DOOR JAMB, AND/OR NAMES IN THE SHIP TO FIELD ON THE WINDOW STICKER. OTHER INDICATORS OF MODIFICATION MAY INCLUDE CUSTOM OR TWO TONE EXTERIOR PAINT, SMOOTH AND/OR BODY COLORED EXTERIOR TRIM SUCH AS MIRRORS, BUMPERS OR BODY SIDE MOLDINGS, CUSTOM WHEELS, UNIQUE SEAT COVER STITCHING, OR CUSTOM TRIM/MOLDINGS. MODIFIERS TYPICALLY PROVIDE PRODUCT CARE AND WARRANTY LITERATURE WITH THE COMPLETED VEHICLE OR ON THEIR WEBSITE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME 2015 TRANSIT VEHICLES EQUIPPED WITH A 3.5L OR 3.7L ENGINE MAY EXHIBIT AN ILLUMINATED MALFUNCTION INDICATOR LAMP (MIL) WITH DIAGNOSTIC TROUBLE CODE (DTC) P0627 (FUEL PUMP A CONTROL CIRCUIT/OPEN) STORED IN POWERTRAIN CONTROL MODULE (PCM) MEMORY. FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
REPLACING THE ORIGINAL EQUIPMENT SYNC/NAVIGATION SYSTEM WITH EITHER AN AFTERMARKET SYNC/NAVIGATION KIT OR MODIFYING ORIGINAL SYNC/NAVIGATION PARTS TO PROVIDE ADDITIONAL FEATURES IS NOT RECOMMENDED NOR SUPPORTED ON ANY FORD, MERCURY OR LINCOLN VEHICLE. ONLY APPROVED GENUINE FORD ACCESSORIES OR ORIGINALLY INSTALLED SYSTEMS ARE SUPPORTED AND CERTIFIED TO FUNCTION CORRECTLY WITH OTHER VEHICLE SYSTEMS. IF YOU SUSPECT A SYSTEM HAS BEEN MODIFIED, THE FOLLOWING RESOURCES CAN BE USED TO VERIFY ORIGINAL EQUIPMENT: MONRONEY LABEL (WINDOW STICKER), PROFESSIONAL TECHNICIAN SOCIETY (PTS) OASIS TAB SELECT SYNC OR HVBOM. FOR GENUINE FORD ACCESSORIES USE: PTS WORKSHOP TAB SELECT DEALER INSTALLED ACCESSORY OR ACCESSORY INSTALLATION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
TO HELP DIFFERENTIATE ENGINE OIL LEAKS FROM OTHER POSSIBLE SOURCES, A NEW WHITE-COLORED FLUORESCENT ENGINE OIL DYE IS AVAILABLE. WORKSHOP MANUAL (WSM), SECTION 303-00 HAS BEEN REVISED TO REFERENCE THE NEW WHITE-COLORED DYE. THE NEW WHITE FLUORESCENT DYE PROVIDES A DISTINCT WHITE GLOW TO IDENTIFY ENGINE OIL LEAKS. THE NEW WHITE FLUORESCENT DYE REQUIRES A PURE UV DIAGNOSTIC INSPECTION LAMP. THE WHITE-COLORED FLUORESCENT DYE AND PURE UV LAMP ARE NOW IN THE ROTUNDA CATALOG. DYE AND LAMP PART NUMBERS. GASOLINE ONLY DYE: 1 OUNCE BOTTLE 164-TP-33200601. DIESEL ONLY DYE: 8 OUNCE BOTTLE: 164-TP-3320-0008. PURE UV DIAGNOSTIC INSPECTION LAMP 164-TP8695 OR 164-R3748.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2015-2017 TRANSIT VEHICLES ORDERED WITH A KEYLESS ENTRY KEYPAD WILL HAVE THE FORD ACCESSORY KEYPAD INSTALLED ON THE VEHICLE AND PROGRAMMED AT THE ASSEMBLY PLANT. THE MASTER KEYCODE CARD WILL BE STOWED IN A CARDBOARD BOX LOCATED IN THE VEHICLES DRIVER DOOR POCKET. BEFORE DELIVERY OF THE VEHICLE TO THE CUSTOMER, THE KEYCODE CARD MUST BE TRANSFERRED TO THE VEHICLES OWNER MANUAL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME 2015-2017 LOW ROOF TRANSIT VEHICLES BUILT ON OR BEFORE 30-SEP-2016 AND UPFITTED WITH A ROOF RACK MAY EXHIBIT INTERIOR ROOF BOW BRACKET TO SIDE PANEL SEPARATION. DURING REPAIR, IN ADDITION TO RENEWING THE ORIGINAL SPOT WELDS WITH METAL INERT GAS (MIG) PLUG WELDS, MIG SKIP WELD THE ENTIRE PERIMETER OF THE HORIZONTAL BRACKET TABS TO THE SIDE PANEL. MIG SKIP WELDING IS REQUIRED TO AVOID EXCESSIVE HEAT DURING THE WELDING PROCESS. AFTER FINISHING OPERATIONS AND PAINTING, RESTORE CORROSION PROTECTION FOLLOWING THE APPLICABLE WORKSHOP MANUAL (WSM) GUIDELINES IN SECTION 501-25. THE ROOF RACK SHOULD BE MOUNTED ACCORDING TO TRANSIT ROOF RACK MOUNTING GUIDELINES FOUND IN QUALITY VEHICLE MODIFIER BULLETIN (QVMB) Q-249 PUBLISHED 1-AUG-16. REFER TO WWW.FLEET.FORD.COM/TRUCKBBAS/TOPICS/QVMP.HTML.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME 2010-2016 EPAS EQUIPPED VEHICLES MAY EXHIBIT STEERING RELATED NOISES. THE WORKSHOP MANUAL (WSM) DIAGNOSTIC PROCEDURES HAVE BEEN UPDATED IN SECTION 211-02. WHEN DIAGNOSING AND REPAIRING EPAS STEERING NOISES USE THE UPDATED PROCEDURES.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SETTING THE CORRECT TIRE INFLATION PRESSURE IS AN IMPORTANT STEP IN THE PRE-DELIVERY PROCESS AND DURING ROUTINE MAINTENANCE INTERVALS. RECENT CUSTOMER CLINICS REVEALED THAT MOST EVERY VEHICLE IN THE CLINICS HAD THE TIRE PRESSURES SET INCORRECTLY. TIRE PRESSURES FROM THE FACTORY ARE NOT SET TO THE CORRECT SPECIFICATION. MAINTAINING THE CORRECT TIRE PRESSURE IS KEY TO THE RIDE CHARACTERISTICS OF THE VEHICLE AND AFFECTS RIDE QUALITY, HANDLING, LOAD CAPACITY AND TIRE WEAR. THE RECOMMENDED PRESSURE SETTINGS CAN BE FOUND ON THE TIRE INFORMATION LABEL IN THE DRIVER'S SIDE FRONT DOOR JAM. DO NOT USE THE TIRE PRESSURES LISTED ON THE SIDEWALL OF THE TIRES. MAINTAINING THE TIRE PRESSURE IS PART OF NORMAL MAINTENANCE. IT SHOULD BE RECHECKED MONTHLY, PER THE OWNER GUIDE AND DURING THE RECOMMENDED TIRE ROTATION INTERVALS.
Source components: TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME 2015-2017 TRANSIT HIGH ROOF WAGON VEHICLES BUILT ON OR AFTER 2-JUN-2015 MAY HAVE BEEN SHIPPED WITH A HEADLINER PANEL THAT WAS NOT PROPERLY SEATED, CAUSING A GAP AT THE C AND/OR C 1/2 PILLAR(S). IN MOST CASES THE CONDITION CAN BE RESOLVED BY REMOVING THE ASSOCIATED PILLAR TRIM PANEL, CAREFULLY SEATING THE HEADLINER PILLAR TAB TO THE PILLAR BLOCK, AND WHILE HOLDING THE HEADLINER IN PLACE, REINSTALLING THE PILLAR TRIM PANEL. HEADLINER PILLAR TAB DAMAGE SHOULD BE REPAIRED WITH SERVICE KIT EK4Z-6151916-A. VISUAL INSPECTION IS ADEQUATE FOR THIS CONDITION, WHILE PHYSICAL TUGGING OR PRYING MAY DAMAGE AN OTHERWISE ACCEPTABLE CONNECTION. HEADLINER RETENTION IN THESE AREAS IS INTENTIONALLY DELICATE TO ALLOW FOR PROPER AIR CURTAIN DEPLOYMENT. DO NOT FABRICATE ALTERNATIVE HEADLINER ATTACHMENT METHODS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME 2008-2017 FORD/MERCURY/LINCOLN VEHICLES EQUIPPED WITH SYNC MAY GENERATE A VHR THAT IDENTIFIES A CONCERN WITH THE BRAKES AND SUSPENSION CATEGORY INDICATING SERVICE IS REQUIRED DUE TO A BRAKE SYSTEM WARNING LAMP BEING ILLUMINATED. IF THE PARK BRAKE WAS APPLIED WHEN THE VHR WAS GATHERING DATA FROM THE MAJOR VEHICLE SYSTEMS, THE BRAKES AND SUSPENSION MESSAGE WILL BE REPORTED AS THE VHR LOOKS FOR ANY WARNING LAMPS ILLUMINATED IN THE INSTRUMENT CLUSTER. RERUN THE VHR WITH THE ENGINE ON AND VEHICLE IN PARK, AND ENSURE THE PARK BRAKE IS DISENGAGED. IF THE SYNC VHR IS STILL REPORTING A CONCERN TO THE CUSTOMERS SYNC OWNERS ACCOUNT, REFER TO THE APPROPRIATE WORKSHOP MANUAL SECTION FOR DIAGNOSIS BY DTC OR SYMPTOM. STARTING IN 2015 NOT ALL SYNC EQUIPPED VEHICLES SUPPORT VHR, REFER TO THE OWNERS MANUAL FOR VHR OPERATION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME 2008-2017 FORD/MERCURY/LINCOLN VEHICLES EQUIPPED WITH SYNC MAY GENERATE A VHR THAT IDENTIFIES A CONCERN WITH THE BRAKES AND SUSPENSION CATEGORY INDICATING SERVICE IS REQUIRED DUE TO A BRAKE SYSTEM WARNING LAMP BEING ILLUMINATED. IF THE PARK BRAKE WAS APPLIED WHEN THE VHR WAS GATHERING DATA FROM THE MAJOR VEHICLE SYSTEMS, THE BRAKES AND SUSPENSION MESSAGE WILL BE REPORTED AS THE VHR LOOKS FOR ANY WARNING LAMPS ILLUMINATED IN THE INSTRUMENT CLUSTER. RERUN THE VHR WITH THE ENGINE ON AND VEHICLE IN PARK, AND ENSURE THE PARK BRAKE IS DISENGAGED. IF THE SYNC VHR IS STILL REPORTING A CONCERN TO THE CUSTOMERS SYNC OWNERS ACCOUNT, REFER TO THE APPROPRIATE WORKSHOP MANUAL SECTION FOR DIAGNOSIS BY DTC OR SYMPTOM. STARTING IN 2015 NOT ALL SYNC EQUIPPED VEHICLES SUPPORT VHR, REFER TO THE OWNERS MANUAL FOR VHR OPERATION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME 2015-2017 TRANSIT VEHICLES EQUIPPED WITH A 3.2L DIESEL ENGINE AND BUILT ON OR BEFORE 12-SEP-2016 MAY EXHIBIT AN ILLUMINATED MIL WITH DTC P040D - EXHAUST GAS RECIRCULATION TEMPERATURE EGRT SENSOR A CIRCUIT HIGH. THIS MAY BE CAUSED BY A FAILED EXHAUST GAS RECIRCULATION TEMPERATURE BANK 1, SENSOR 1 (EGRT11) SENSOR. FOLLOW THE SERVICE PROCEDURES STEPS TO CORRECT THE CONDITION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME 2015-2017 TRANSIT VEHICLES EQUIPPED WITH A 3.2L PUMA DIESEL ENGINE MAY EXHIBIT AN OVERHEAT CONDITION DUE TO COOLANT LOSS WITHOUT ANY EXTERNAL COOLANT LEAKS. THIS MAY BE DUE TO AN INTERNALLY LEAKING EXHAUST GAS RECIRCULATION (EGR) COOLER. TO CORRECT THIS CONDITION, INSTALL REVISED EGR COOLER CK4Z-9U433-B. REFER TO WORKSHOP MANUAL (WSM), SECTION 303-08. USE CAUSAL PART 9U433 AND APPLICABLE LABOR OPERATIONS FROM SECTION 09 OF THE SERVICE LABOR TIME STANDARDS (SLTS) MANUAL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME 2015-2016 F-150, C-MAX, EDGE, MKS, TAURUS, AND FLEX AND 2016 EXPEDITION, EXPLORER, ESCAPE, FUSION, MUSTANG, MKZ, MKX, NAVIGATOR, TRANSIT AND TRANSIT CONNECT VEHICLES EQUIPPED WITH A 2.0L, 2.5L, 3.5L OR 3.7L GASOLINE ENGINE AND BUILT ON OR BEFORE 31-MAY-2016 MAY EXHIBIT AN INTERMITTENT LOSS OF POWER AND/OR AN ILLUMINATED POWERTRAIN MALFUNCTION (WRENCH) LAMP WITH DIAGNOSTIC TROUBLE CODES (DTCS) P2111, P2112 AND/OR P2119 STORED IN POWERTRAIN CONTROL MODULE (PCM) MEMORY. FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles may have a concern where the safety belt retractor webbing does not extract from the stowed position or exhibits excessive pressure on the occupant during use. This may be due to a normal condition which happens when the seatbelt retracts at a high rate of speed. The Workshop Manual, Section 501-20A General Procedures has been updated with a locked seatbelt retractor releasing procedure.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Diesel customers may inquire about a Distance to Empty (DTE) warning message for the DEF system. It may be necessary to add up to 2.5 gallons of DEF for the system to detect a refill event and clear the DTE warning messages, however it is recommended to fill the tank to capacity, which may take up to 5 gallons. Driving conditions that increase fuel consumption will increase DEF consumption and will require additional fills between oil change intervals. If the DTE message is displayed and no Diagnostic Trouble Codes (DTCs) are present, read the Reduct_TNK_LV PID with the Integrated Diagnostic System (IDS). If it reads less than 100%, DEF must be added. If the message doesnt clear after the PID reads 100%, run the IDS SCR System Refill Activation routine.
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Powertrain Control/Emissions Diagnosis (PC/ED) manual has been revised for diagnosing electronic throttle bodies (ETBs). The ETC_ACT and ETC_DSD PIDs should not used to diagnose possible ETB concerns. The IDS has a limited refresh rate when reading these PIDs and cannot display quickly enough to validate a concern. The PCM automatically monitors these inputs more accurately and will set diagnostic trouble codes (DTCs) when appropriate. Using these PIDs for diagnostics will lead to inaccurate results and improper ETB replacements. If a concern is intermittent and no DTCs are present, refer to historical DTCs and the PC/ED, Section 3 No DTCs Present Index chart for further information.
Source components: ENGINE · ENGINE AND ENGINE COOLING · ENGINE AND ENGINE COOLING:COOLING SYSTEM · ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN · ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS · ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY · ENGINE AND ENGINE COOLING:ENGINE · ENGINE AND ENGINE COOLING:ENGINE:DIESEL · ENGINE AND ENGINE COOLING:ENGINE:GASOLINE · ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:BELTS AND ASSOCIATED PULLEYS · ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER · ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV) · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE) · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2013-2017 F-Super Duty, 2015-2017 Transit and 2016-2017 F650-F750 vehicles equipped with a diesel engine may exhibit diagnostic trouble code (DTC) P2201 (NOX Sensor Circuit Range/Performance Bank 1 Sensor 1) in the powertrain control module (PCM). When repairing DTC P2201, refer to the online version of the powertrain control/emission diagnostic (PC/ED) manual for the latest diagnostics. The pinpoint test RD and diagnostic trouble code chart have been updated in section 4 and 5 for DTC P2201.
Source components: ELECTRICAL SYSTEM · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
2015-2017 - F-SUPER DUTY, F-650/750 WITH 6.7L DIESEL AND 2015-2017 TRANSIT - 3.2L DIESEL EQUIPPED VEHICLES USE A SELECTIVE CATALYTIC REDUCTION (SCR) SYSTEM DESIGNED TO REDUCE THE VEHICLES EXHAUST EMISSIONS. THE DIESEL EXHAUST FLUID (DEF) TANK IS FILLED TO SPECIFICATION AT THE ASSEMBLY PLANT. DEALERS ARE NOT INSTRUCTED TO CHECK OR TOP OFF THE DEF FLUID ON THE PRE-DELIVERY INSPECTION (PDI) SERVICE RECORD (CHECK SHEET) AND ARE THEREFORE NOT AUTHORIZED TO TOP-OFF THE TANKS DURING PDI. THE VEHICLE INSTRUMENT CLUSTER MESSAGE CENTER IS DESIGNED TO INDICATE WHEN THE DEF IS LOW (EXHAUST FLUID LOW OR EXHAUST FLUID EMPTY). THE SCR SYSTEM SHOULD BE INVESTIGATED FOR REPAIR AT PDI ONLY IF THE INSTRUMENT CLUSTER MESSAGE CENTER INDICATES THAT THERE IS DEF SYSTEM FAULT OR LOW FLUID LEVEL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME 2015-2016 TRANSIT VEHICLES EQUIPPED WITH A 3.2L DIESEL ENGINE WITH LESS THAN 10,500 KM (6,500 MILES) AND BUILT ON 5/11/2015 AND THROUGH 2/8/2016 MAY EXHIBIT A CRANK NO START CONDITION AND/OR MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATION WITH DIAGNOSTIC TROUBLE CODES (DTCS) P2291 AND/OR P0087. THIS MAY BE DUE TO A FUEL INJECTION PUMP. FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME 2015-2016 TRANSIT VEHICLES BUILT ON 8/1/2015 AND THROUGH 2/1/2016 MAY EXHIBIT A FRONT DOOR THAT DOES NOT OPEN WHEN USING THE OUTSIDE HANDLE AND REQUIRES A SECOND ATTEMPT.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME 2015-2016 TRANSIT VEHICLES BUILT ON OR BEFORE 2/15/2016 MAY EXHIBIT CONTACT BETWEEN THE FRONT DOOR AND FENDER. THIS MAY BE DUE TO THE FRONT DOOR CHECK ARM ALLOWING THE DOOR TO OPEN FAR ENOUGH TO BEN THE DOOR HINGES AFTER REPEATED FULL DOOR OPENINGS.
Source components: STRUCTURE:BODY:BUMPERS · STRUCTURE:BODY:DOOR · STRUCTURE:FRAME AND MEMBERS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2012-2016 vehicles equipped with a touchscreen navigation system and the language set to Arabic may exhibit a blank screen. This may be the result of the ribbon cables not being fully seated inside the front display interface module (FDIM) or an improper software configuration of the FDIM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
In some of the affected vehicles, the front control/display interface module (FCDIM) may have been unintentionally programmed for the European market instead of the North American market
NHTSA source summary · Original PDF not reviewed by Recallfolio
Online automotive service information system for April 2016-AM/FM/CD or sync with a 4.2 inch screen may exhibit a blank screen and no a;udio after a crank event.
NHTSA source summary · Original PDF not reviewed by Recallfolio
BROKEN INTERIOR SLIDING DOOR HANDLE - BUILT ON OR BEFORE 1/4/2016 ISSUE Some 2015-2016 Transit vehicles built on or before 1/4/2016 may experience a broken interior sliding door handle due to the sliding door lower roller assembly. SERVICE PROCEDURE 1. Does the vehicle have a broken interior sliding door handle? a. Yes - proceed to Step 2. b. No - this article does not apply. 2. Replace the interior sliding door handle. Refer to Workshop Manual (WSM), Section 501-14. 3. Replace the sliding door lower roller assembly. Refer to WSM, Section 501-03. BROKEN INTERIOR SLIDING DOOR HANDLE - BUILT ON OR BEFORE 1/4/2016 TSB 16-0051 a. To help maintain original door adjustment, do not remove the angle bracket from the sliding door. (Figures 1 and 2) b. Tighten the sliding door lower roller assembly to angle bracket nuts to 30 Nm (24 lb-ft). 4. With the sliding door latched in the fully open position, check the latch in the lower roller for binding on the striker; the latch should have some free play. Adjust the striker as required.
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: 2015 TRANSIT BUS/WAGON WITH A HIGH ROOF, WILL EXPERIENCE A GAP OR LOOSE HEADLINER BETWEEN 3-5 MM BETWEEN SIDE TRIM PANEL AT C AND/OR C 1/2 PILLARS AND HEADLINER *CN
NHTSA source summary · Original PDF not reviewed by Recallfolio
2015 TRANSIT: VEHICLES EQUIPPED WITH DIESEL MAY SHOW THE MALFUNCTION INDICATOR LIGHT ILLUMINATED WITH DTC P204F PRESENT IN REDUCTANT DOSING CONTROL MODULE *CN
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD 2015 TRANSIT: BULLETIN INFORMATION INVOLVING TRANSIT VEHICLES BUILT BEFORE 3/30/2015 MAY HAVE DRIVING AND/OR CHECK ENGINE ILLUMINATED LIGHT CONCERNS. *LJ
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: NO SERVICE ACTION IS RECOMMENDED FOR THIS CONDITION. PLEASE USE AT YOUR DISCRETION. VARIOUS 2010-2015 VEHICLES MAY EXPERIENCE A TURBULENCE NOISE, SIMILAR TO AN HELICOPTER NOISE, AT HIGHWAY SPEEDS WHEN THE REAR DOOR WINDOW(S) OR SUNROOF ARE OPEN. *TA
Source components: VISIBILITY:POWER WINDOW DEVICES AND CONTROLS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2016 F-Super Duty Pickkup vehicles equipped with 6.7L engine and built on or before 9/9/2015 may exhibit MIL on with DTCs P259F, P0234 and/or P0236 stored in powertrain control module (PCM) memory. 3.7L Dur actec - Illuminated MIL with various DTCS and /or underhood BJB Fuse F36 Open - Built on or before 06/11/2015
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD 2015 TRANSIT: BULLETIN INFORMATION INVOLVING CERTAIN TRANSIT VEHICLES BUILT BEFORE 3/30/2015 MAY HAVE VARIOUS DRIVEABILITY AND CHECK ENGINE LAMP CONCERNS WITH TROUBLE CODES STORED IN THE POWER CONTROL MODULE. *LJ
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: SOME VEHICLES FRONT SEAT BELTS ARE MAKING NOISE AND FAILS TO RETRACT OR EXTEND PROPERLY DUE TO A POSSIBLE MODIFICATION OF VEHICLE AND BULKHEAD PARTITION. MODEL 2015 TRANSIT. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: WHEN THEY SHOULD BE OFF, SOME VEHICLES, WITH HIGH LED INTERIOR INTENSITY, ARE EXPERIENCING LED CARGO LAMPS, WITH A LOW GLOW AND NEED NOT BE REPLACED. MODEL 2015 TRANSIT. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD 2015 POLICE INTERCEPTOR SEDAN VEHICLES: CUSTOMER SATISFACTION PROGRAM REGARDING ENABLE POLICE MODE TRUNK RELEASE. THE PROGRAM WILL BE IN EFFECT THROUGH MAY 31, 2016. *LJ
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD 2015 TRANSIT 3.2L: BULLETIN INFORMATION INVOLVING ENGINE LIGHT FOR REDUCTANT PUMP AND REDUCTANT LINE HEATER, AND INCONSISTENT WIRE INSULATION. *LJ
Source components: ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS.