2022 Ford F-250 SD Manufacturer communications & TSBs.Page 3
Original record summaries, dates and identifiers for this model-year. Records 201–242 of 242, ordered newest first. Dated records on this page: Jul 28, 2021–Apr 6, 2022.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Apr 6, 2022Service Bulletin/Repair Instructions
SSM 50657
NHTSA communication ID: 10210238
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 F-Super Duty vehicles that are not equipped with a telematics control unit (TCU) module and built on or before 03-Mar-2022 may exhibit a no crank/no start condition due to a discharged battery. If no parasitic draw is found during normal diagnostics, run the GWM - Gateway Module A (GWM) Configuration application using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool to correct the condition. For claiming, use causal part 14F642 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
In various 2017-2022 Ford and Lincoln vehicles, customers may receive a message in the FordPass or LincolnWay App stating "Feature Unavailable. Since this is a fleet vehicle, it cannot access the (SYNC Connect) FordPass or LincolnWay app through the TCU Embedded Modem. If this message appears, the vehicle may be equipped with a fleet telematics module. Replacement of the TCU or TCU related repairs will not prevent this message from appearing. Please refer the customer to in app FordPass Guides or LincolnWay Concierge Teams to aid with fleet telematics removal. Open app, select Account > Help > CHAT or CALL option
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2022 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated malfunction indicator lamp (MIL) with cylinder injection pulse offset diagnostic trouble codes (DTC) P2B11, P2B13, P2B15, P2B17, P2B19, P2B1B, P2B1D, and/or P2B1F stored in the powertrain control module (PCM) after various fuel system repairs. This may be due to incorrect learned values in the PCM. To correct the condition, allow the engine to idle for at least 6 minutes with the engine at normal operating temperature. Clear DTCs and retest. PCM replacement is not necessary for this condition.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 F-Super Duty vehicles equipped with a 6.7L diesel engine and a 10R140 automatic transmission may exhibit harsh 3-2 and/or 2-1 downshifts when coming to a stop in tow/haul mode or when using engine brake mode. Because this is related to a software issue, replacement of the transmission or other components will not resolve this condition and engineering is currently working on a software update which is expected to be available by the end of June 2022. In the interim Perform TSB 22-2015, steps 10-15 only, and evaluate if the concern is resolved. If the concern is still present, let the customer know they can continue to drive the vehicle and schedule a follow-up appointment for June 2022. Monitor OASIS for updates and confirm that the service appointment is going forward once the repair becomes available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2011-2022 F-Super Duty and 2016-2023 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit an elevated idle condition. During prolonged idle time, vehicles may experience this elevated idle to reduce unburned hydrocarbons from the SCR. The powertrain control module estimates hydrocarbon levels in the SCR and may increase idle speed to remove them. Idle speed will be increased to 1000 RPM for ambient temperatures near 26°C (80°F) and may increase to 1200 RPM at -40 °C (-40°F). Vehicles may exhibit exhaust smoke and diesel exhaust fluid smell during elevated idle condition. Exhaust smoke and smell condition will not affect reliability or durability of the engine. Power take-off (PTO) use and idle set point control will disable elevated speed. It is required that the operator monitor the vehicle and adhere to any Exhaust Filter warning messages.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2022 F-Super Duty pickup vehicles equipped with a 6.7L engine and built on or before 23-Sep-2021 may exhibit a thump/whine/knock noise from the fuel tank at idle or during key on, engine off (KOEO) after performing TSB 21-2057. The noise may be more pronounced at fuel levels at or below 1/4 tank. This may be due to the fuel pump. To correct the condition, replace the fuel pump and sender assembly with service part HC3Z-9H307-AR for vehicles with 160/164 inch wheelbase and a midship fuel tank, HC3Z-9H307-AQ for vehicles with 142/148 inch wheelbase and a midship fuel tank, and HC3Z-9H307-AS for vehicles with an aft of axle fuel tank. For claiming, use causal part 9H307 and applicable labor operations in Section 08 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 21-2236 to update the models and year affected. Some 2013-2018 C-Max, 2013-2020 Fusion/MKZ, 2013-2022 Escape, 2015-2018 Focus, 2015-2019 MKC, 2015-2022 Edge/F150/Mustang, 2016-2018 MKX, 2016-2019 Explorer, 2017-2022 F-Super Duty, 2018-2022 EcoSport/Expedition, 2019-2022 Ranger/Nautilus, 2021-2022 Bronco/Bronco Sport/Mustang Mach-E, 2022 Maverick vehicles may experience seat pan looseness, lateral movement, or a clunk/thump noise on turns. This may be due to the seat pan track. To correct the condition, follow the Service Procedure steps to install a reinforcement.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 F-Super Duty vehicles equipped with a trailer brake controller and a 12.3 inch center display screen, built on or before 16-Feb-2022, may exhibit a trailer brake module fault message, trailer lighting module fault message and/or trailer right turn lamps fault/trailer left turn lamps fault message, diagnostic trouble codes (DTC) B1D08 and/or B1D09 stored in the integrated trailer module (TRM) and/or U0137 stored in the instrument panel cluster (IPC) or body control module (BCM). This may be due to the software in the TRM. To correct the condition, follow the Service Procedure to reprogram the TRM.
Source components: ELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL · ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM · EXTERIOR LIGHTING:TURN SIGNAL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2022 F-150 and F-Super Duty vehicles equipped with tailgate step assemblies may exhibit a step assembly that binds/will not open or opens/pops up while driving. This could be due to an incorrect adjustment of the step assembly. Before replacing any components for this concern, follow the Tailgate Step Adjustment procedure in Workshop Manual, Section 501-04, General Procedures.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2022 F-Super Duty vehicles equipped with a 10R140 automatic transmission may exhibit harsh reverse to drive engagements without diagnostic trouble codes (DTCs). This may be due to sticking valves in the main control valve body or suspect input shaft seals (F9) and the output shaft seals (F10). To correct the condition, follow the Service Procedure steps to perform the transmission accelerated main control break-in routine for the E and F clutches and/or replace the input shaft seals (F9) and the output shaft seals (F10).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2022 F-150, 2017-2022 F-Super Duty and 2018-2022 Expedition/Navigator vehicles may exhibit poor air conditioning (A/C) performance, loss of airflow and/or engine cooling fans running continuously from high A/C pressures. This concern may be from the evaporator freezing up due to the evaporator temperature sensor being biased. To correct the condition, follow the Service Procedure steps to replace the evaporator temperature sensor.
Source components: ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 Ford and Lincoln vehicles may need to perform A/C leak detection diagnostics. The 2022 Workshop Manual (WSM), Section 412-00 for A/C leak detection diagnosis is incomplete and is in the process of being updated. At this time, Pinpoint Test AN of Section 412-00 in the 2022 F-150 WSM can be used temporarily for the service procedure and specifications. Use the correct vehicle specific removal and replacement sections as needed. A new labor operation 19700A45 has also been released to align with the new procedure.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2022 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated malfunction indicator lamp (MIL), lack of power, and/or excessive turbo noise during operation, with diagnostic trouble codes (DTC) P003A, P0045, P0046, P0047, P0048, P0234, P0237, P0238, P132A, P2564, P2565, P2598, P259E, and/or P259F stored in the powertrain control module. If Workshop Manual (WSM) diagnostics lead to turbocharger variable vane actuator replacement, service part LC3Z-9G488-A has been released for service. Replacement of the turbocharger assembly is no longer required.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2020 F-150, 2017-2022 F-Super Duty and 2016-2022 F-650/F-750 vehicles equipped with a diesel engine may exhibit diagnostic trouble code (DTC) P0000 stored in the powertrain control module (PCM) after an on-demand self test. This DTC is due to a processing error in the PCM as a result of on-demand self testing. P0000 is an invalid DTC that will not illuminate the malfunction indicator lamp (MIL) and no repairs should be performed.
Source components: EQUIPMENT · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 F-Super Duty vehicles equipped with XL or XLT trim and built on or before 07-Feb-2022 may exhibit a Trailer Tire Status Monitor Capability Not Detected message in the Trailer Tire Info section of the instrument panel cluster (IPC) while a configured trailer is attached. If the vehicle is equipped with a Dealer Installed Accessory or Genuine Ford Accessory trailer tire pressure monitoring system (TPMS), part numbers LC3Z-1A189-A/B/D/E, this may be due to the gateway module (GWM) configuration. To correct the condition, download and run the GWM - Gateway Module A (GWM) Configuration application using the Ford Diagnosis and Repair System (FDRS). For claiming, use causal part 14F642 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2018 Focus/MKX/C-MAX, 2017-2019 MKC/Taurus/Flex/MKT, 2017-2020 Fusion/MKZ/Continental, 2017-2022 Mustang/Edge/Explorer/Police Interceptor Utility/Escape/F-150/F-Super Duty, 2018-2022 Expedition/Navigator, 2019-2022 Ranger/Nautilus, 2020-2022 Corsair/Aviator, and 2021-2022 Mustang Mach-E vehicles may exhibit a noisy, incorrectly operating, and/or inoperative seat motor. This may be due to a damaged or inoperative seat track motor. A lower level service part has been released to correct noisy, incorrect operation/inoperative seat track motors.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2022 F-Super Duty vehicles may exhibit a condition where the engine will not turn off and/or have various electrical symptoms including a dead battery, horn stays on and no crank/no start. The vehicle may also have an illuminated anti-lock braking system (ABS) indicator with diagnostic trouble codes (DTCs) C0020 and U3003 in the ABS module. The vehicle may not shift out of park (P) and/or have continuously illuminated brake lamps with DTCs P0504 and/or C0040. This may be a result of water/moisture intrusion into the battery junction box (BJB). The BJB is located under the hood of the vehicle. This water/moisture intrusion may be related to the BJB cover not installed completely or broken cover tabs/locking fingers allowing water/moisture into the BJB. To correct the condition, follow the Service Procedure steps to inspect for water/moisture intrusion into the BJB and replace the BJB if water/moisture intrusion is found.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 F-Super Duty vehicles built on 01-Dec-2021 and through 15-Dec-2021 equipped with a 10R140 transmission may leak from the bellhousing of the transmission. This may be caused by an oversized bore in the front support cover. If a leak is found to be coming from the torque converter hub seal in the bell housing please replace the torque converter hub seal and the front support cover to correct the condition.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2021-2022 various Ford and Lincoln vehicles may exhibit an erroneous diagnostic trouble code (DTC) U1A01:93 stored in the telematics control unit (TCU). This may be due to various software parameters within the TCU. If this DTC is identified during normal diagnostics, but the vehicle does not exhibit any customer concerns around the TCU operation, clear this DTC and no further repairs are recommended. If the DTC returns after being cleared or if the vehicle exhibits connectivity concerns with the TCU, continue with normal Workshop Manual (WSM) diagnostics. If set erroneously, this DTC does not cause any observable concerns or warning messages and does not affect vehicle performance or durability. Ford is developing a software update which will be delivered to the vehicle via an over-the-air (OTA) TCU update in July 2022 to prevent this DTC from setting erroneously.
Source components: ELECTRICAL SYSTEM:SOFTWARE · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2022 F-Super-Duty vehicles equipped with a 6.7L diesel engine may exhibit a hard start, lack of power and/or runs rough concern with an illuminated malfunction indicator light (MIL) and diagnostic trouble codes (DTCs) P0087 and/or P008A. This may be due to low fuel level or fuel gelling in cold ambient temperatures. If no root cause is determined after normal Powertrain Control/Emissions Diagnosis (PC/ED) pinpoint test MA, recommend that the customer use a different brand of fuel and use Motorcraftî PM-23-A Diesel Fuel Anti-Gel and Performance Improver. Inform the customer that bio-diesel blended fuels have a higher occurrence of fuel gelling. Fuel gelling and or low fuel conditions causing a P0087 and/or P008A is not covered under warranty.
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL · FUEL SYSTEM, DIESEL · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 F-Super Duty vehicles equipped with a 10R140 automatic transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift. It is possible the vehicle may also have an illuminated malfunction indicator lamp (MIL) and diagnostic trouble codes (DTC) P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F7, P2700, P2701, P2702, P2703, P2704 and/or P2705 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to sticking valves in the main control valve body. To correct the condition, follow the Service Procedure to submit a report a vehicle concern with the collected transmission early alert monitor keep-alive memory (TEAM KAM) data file, then perform the transmission accelerated main control break-in routine for the appropriate clutches and/or overhaul main control valve body.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 F-250 Super Duty 4x4 vehicles equipped with a 6.7L diesel engine, 10R140 transmission, and 160 inch wheelbase may exhibit a momentary, slight grinding-type noise immediately following a 4-3 downshift while coasting without the brakes applied. This condition does not affect vehicle durability. Replacement of the transmission or other components will not resolve this condition and engineering is currently working on a solution which is expected to be available by July 2022. Let the customer know they can continue to drive the vehicle and schedule a follow-up appointment for July 2022. Monitor OASIS for updates and confirm that the service appointment is going forward once the repair becomes available.
Source components: EQUIPMENT · POWER TRAIN:AUTOMATIC TRANSMISSION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customer Satisfaction Program 21B72 Certain 2022 Model Year Super Duty Vehicles Equipped with a 10R140 Transmission Transmission Front Support Cover Replacement
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2022 F-Super Duty/Explorer/Aviator and 2021-2022 F-150 vehicles may exhibit a Front Camera Fault, Lane Keeping Fault, and/or Collison Warning Not Available message with various diagnostic trouble codes (DTC) stored in the image processing module A (IPMA). If programming fails or Ford Diagnosis and Repair System (FDRS) states a file failed to flash after replacing the IPMA or reprogramming IPMA software, test the battery using any approved Rotunda tool including the GR-190, GRX-3590, and DCA-8000. Fully recharge or replace the battery according to results of the tool. Set the battery charger to maintain battery voltage between 12.6 and 13.6 volts during the entire programming procedure. The IPMA programming procedure may take several hours to complete due to the size of the software files required.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2022 F-Super Duty vehicles may exhibit a condition where the engine will not turn off and/or have various electrical symptoms including a dead battery, horn stays on and no crank/no start. The vehicle may also have an illuminated anti-lock braking system (ABS) Indicator with DTCs C0020 and U3003 in the ABS module. This may be a result of water/moisture intrusion into the battery junction box (BJB). The BJB is located under the hood of the vehicle. This water/moisture intrusion may be related to the BJB cover not installed completely or broken cover tabs/locking fingers allowing water/moisture into the BJB. To correct the condition, follow the Service Procedure steps to inspect for water/moisture intrusion into the BJB and replace the BJB if water/moisture intrusion is found.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2022 F-Super Duty vehicles equipped with a 6.2L or 7.3L gas engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0339 stored in the powertrain control module (PCM) or the vehicle may exhibit a runs rough concern with no DTCs. This may be due to a concern with contamination on the crankshaft position (CKP) sensor. If pinpoint test JD in the Powertrain Control/Emissions Diagnosis (PC/ED) Manual leads to CKP sensor replacement, inspect the sensor for contamination and document the results in the warranty claim. Use causal part 6C315 and utilize labor operation 12650D57D in the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2022 F-Super Duty pickup vehicles equipped with a 6.7L engine, 175 inch wheelbase, and built on or before 23-Sep-2021 may exhibit a thump/whine/knock noise from the midship fuel tank at idle or during key on, engine off (KOEO) after performing TSB 21-2057. The noise may be more pronounced at fuel levels at or below 1/4 tank. This may be due to the fuel pump. To correct the condition, replace the fuel pump and sender assembly with service part HC3Z-9H307-AP. For claiming, use causal part 9H307 and applicable labor operations in Section 08 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 F-Super Duty vehicles built on or after 20-Dec-2021 and equipped with remote tailgate release may exhibit a perceived inoperative tailgate latch release function. This may be due to a design change to the tailgate release strategy. When using the power tailgate release switch in the instrument panel, release switch on the tailgate, or the remote keyless entry (RKE) fob, the switch must be pressed twice within 3 seconds with the transmission in Park for the tailgate to release. If the remote tailgate release is still inoperative, refer to Workshop Manual (WSM), Section 501-14 for normal diagnostics.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2022 F-Super Duty vehicles may exhibit an illuminated anti-lock brake system (ABS) warning lamp due to various diagnostic trouble codes or faults. If the ABS module does not respond to the Ford Diagnosis and Repair System (FDRS) scan tool during normal diagnostics, make sure all related connectors are fully seated. If no connector concerns are found, remove the FDRS scan tool from the vehicle and disconnect the vehicle battery cables for 10 minutes. Reconnect the battery cables and attempt to re-establish communication with the ABS module using the FDRS scan tool.
Source components: ELECTRICAL SYSTEM · SERVICE BRAKES, HYDRAULIC.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2022 F-Super Duty vehicles equipped with a 6.7L engine may experience a lack of power due to snow packing of the engine air cleaner when operating in extremely snowy conditions. Diagnostic trouble code (DTC) P1548 may be present in the powertrain control module (PCM). A heavy snow environment pre-filter service kit (service part LC3Z-9K635-AA) is now available for use but is not a warrantable item. It is recommended that the service kit be removed at temperatures greater than 50ðF (10ðC) and reinstall in subsequent winter seasons in order to maintain optimal vehicle performance.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2022 F-Super Duty and 2016-2022 F-650/F-750 with 6.7L diesel engines, 2015-2019 Transit with 3.2L diesel engines and 2018-2021 F-150 with 3.0L diesel engines may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P206C in the powertrain control module (PCM). Review of repair data supports that P206C is often the result of incorrect diesel exhaust fluid (DEF) concentration. Per Powertrain Control/Emissions Diagnosis (PC/ED) Pinpoint Test (PPT) RJ, a DEF concentration reading below 28% will set P206C and cause vehicle derate. If low concentration is suspected, drain fluid and replace with known good DEF before replacing any parts. Low concentration of DEF is not a warrantable condition.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2021 EcoSport, Expedition, Navigator; 2019-2021 Ranger; 2020-2021 Escape, Corsair, Explorer, Transit; 2021 Bronco, Bronco Sport, Edge, Nautilus, F-150, Mustang; 2019-2022 Transit Connect; 2020-2022 Aviator, F-Super Duty; and 2022 Maverick vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0496, P0456, P0455, P04F0, and/or P0451. Ford has tested returned EVAP canister purge valves and found them to be fully functional. Prior to replacing the canister purge valve or other EVAP components, perform the following tests using the Ford Diagnosis and Repair System (FDRS) Scan Tool: Full System EVAP Leak Test - FDRS Location: TOOLBOX > PCM > PCM - Evap Emissions System Test and the EVAP Purge Valve Leak Test - FDRS Location: TOOLBOX > PCM > Evap Emission System Toolbox > CPV Check.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2022 F-Super Duty vehicles equipped with a 10R140 automatic transmission may exhibit a delayed engagement into drive and/or reverse on initial start-up. The condition may occur at times after sitting over night or for a couple of days. This may be due to the transmission fluid draining back from the torque converter. This is a normal characteristic of the 10R140 transmission and has no effect on durability, do not attempt to repair. Advise the customer to allow more time after first engine start-up and before shifting into gear allowing time for the torque converter to refill.
Source components: POWER TRAIN · POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER · POWER TRAIN:MANUAL TRANSMISSION:LUBRICANT.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2020-2022 F-Super Duty vehicles equipped with a 10R140 automatic transmission at times may exhibit a normal skip shift upshifting and downshifting strategy. Typical examples are 1-3 or 3-5 upshift or a 6-4 coasting downshift. This is a normal characteristic and no repairs should be attempted for this condition. For more detailed information about the 10R140 skip gear shift strategy refer to the Workshop Manual (WSM), Section 307-01 > Diagnosis and Testing.
Source components: POWER TRAIN · POWER TRAIN:AUTOMATIC TRANSMISSION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 F-Super Duty vehicles equipped with a 6.7L engine and built on or before 05-Oct-2021 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P054E, P054F, P02ED, P2A00 And/Or P2A01 stored in the powertrain control module (PCM). This may be due to the software in the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2022 F-250 vehicles equipped with a 6R100 transmission, four-wheel drive (4WD), 3.73 rear axle ratio, and built on or after 01-Feb-2021 may exhibit a metallic grinding noise from the rear of the vehicle under light acceleration between 23-33 mph (37-53 Km/h). The noise is most prevalent in 3rd and 4th gear when the vehicle is warm. This may be due to normal driveline noise transmitting through the driveshaft. To correct the condition, replace the rear axle drive pinion flange using service part number HC3Z-4851-A. Also, replace the rear pinion seal. Refer to Workshop Manual (WSM), Section 205-02. For claiming, use causal part 4001 and applicable labor operations in Section 04 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2022 F-250 vehicles equipped with a 6.7L engine, 10.5 inch Sterling rear axle with a 3.55 gear ratio (tag S403N), and four-wheel drive (4WD) built on 01-Jun-2021 and through 01-Oct-2021 may exhibit a driveline vibration and/or growl/roar noise between 1700-2100 RPM. Before performing normal diagnostics in the Workshop Manual (WSM), inspect the rear axle to verify if a damper is installed on the pinion flange. If a damper is present, refer to WSM, Section 100-04 for normal diagnostics. If no damper is present, replace the rear axle drive pinion flange using service part number HC3Z-4851-A. Also, replace the rear pinion seal. Refer to WSM, Section 205-02. For claiming, use causal part 4001 and applicable labor operations in Section 04 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2022 F-Super Duty vehicles equipped with a 6.2L or 7.3L engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0106 stored in the powertrain control module (PCM) after key-off transportation of the vehicle to higher altitudes. To correct the condition, clear the DTCs, cycle the ignition to OFF, cycle the ignition to ON, wait ten seconds, cycle the ignition to OFF, wait ten seconds, then start the engine. If the condition remains, refer to the Powertrain Control/Emissions Diagnosis (PC/ED) Manual for diagnostics.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2022 F-250 vehicles equipped with a 6R100 transmission, four-wheel drive (4WD), 3.73 rear axle ratio, and built on or after 01-Feb-2021 may exhibit a metallic grinding noise from the rear of the vehicle under light acceleration between 23-33 mph (37-53 Km/h). The noise is most prevalent in 3rd and 4th gear when the vehicle is warm. This may be due to normal driveline noise transmitting through the driveshaft. To correct the condition, replace the rear axle drive pinion flange using service part number HC3Z-4851-A. Also, replace the rear pinion seal. Refer to Workshop Manual (WSM), Section 205-02. For claiming, use causal part 4851 and applicable labor operations in Section 04 of the Service Labor Time Standards (SLTS) Manual.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021 F-Super Duty vehicles may exhibit harsh or delayed engagement/shift concerns. Most concerns may be addressed with the PCM/TCM Transmission Accelerated Main Control Break In Routine. Refer to Workshop Manual (WSM), Section 307-01, DTC Chart and/or Diagnosis By Symptom to identify the clutch(s) to be cycled. This routine cycles the shift solenoids and clutch control valves to remove contamination that may be sticking the valves and must be performed along with an adaptive learning drive cycle before attempting internal service. Although this routine was originally developed for low mileage vehicles, it has proven effective for resolving many shift and engagement symptoms across the life of the vehicle. For claiming, use causal part 7A100 and applicable labor operations in Section 7 of the Service Labor Time Standards Manual.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2022 F-Super Duty/F-650/F-750 vehicles equipped with a 6.7L engine and built on or after 15-Apr-2021, with less than 300 miles (483 km), may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P20E8 and/or P208B stored in the powertrain control module (PCM). This may be due the reductant pump and heater assembly losing prime during extended vehicle storage. To correct the condition, follow the Service Procedure to prime the reductant pump and heater assembly.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2022 F-Super Duty vehicles equipped with four-wheel drive (4WD) may exhibit steering bind or front driveline noise because the hublocks do not automatically disengage immediately following a shift from 4WD to two-wheel drive (2WD). This may be due to driveline tension between the axle and hub keeping them engaged. To correct the condition, shift the vehicle from DRIVE to REVERSE to release the driveline tension. This is a normal operating characteristic of the vehicle and replacement of the hublocks is not recommended. If the concern remains after shifting into REVERSE and allowing the vehicle to move approximately 5 feet (1.5 meters), remove and inspect the hublocks for any damage. Refer to Workshop Manual (WSM), Section 308-07A. Repair as necessary.