2011 Ford F-250 SD Manufacturer communications & TSBs.Page 1
Original record summaries, dates and identifiers for this model-year. Records 1–100 of 163, ordered newest first. Dated records on this page: Feb 1, 2014–Feb 24, 2026.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Feb 24, 2026Service Bulletin/Repair Instructions
SSM 54601
NHTSA communication ID: 11029052
NHTSA source summary · Original PDF not reviewed by Recallfolio
Ford and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory wireless keyless entry keypad systems may or may not come with a wallet card containing the master code. Unlike the integrated wired keypad, the accessory wireless keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool or from the label printed on the body control module (BCM). The Factory Keyless Entry Code application within the diagnostic scan tool will not provide an applicable master code for the accessory wireless keypad. If the wallet card for an accessory keypad is not available, the "Wireless RF Keypad Diagnosis Guide" can be referenced and provides direction on how to retrieve the master code. This guide is located under the Workshop Manual tab > Accessories > Installation > Wireless RF Keypad Diagnosis Guide > PPT C > Step C2.<br /><br /> Note: The only available keypad for some vehicles from the assembly plant is the accessory wireless keyless entry keypad. The integrated wired keypad cannot be installed on vehicles not equipped from the factory with a wired keyless entry k
Source components: ELECTRICAL SYSTEM · STRUCTURE:BODY · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2011-2012 Model Year F-Series Super Duty Vehicles Equipped with a 6.7L Diesel Engine State Inspection and Maintenance Test Failure Due to DTCs P2073 and/or P2074 Adding owner letter and corrected dealer bulletin. First Part submitted 11/01/23
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2011-2012 Model Year F-Series Super Duty Vehicles Equipped with 6.7L Diesel Engine State Inspection and Maintenance Testing Failure Due to DTCs P2073 and/or P2074
Source components: BACK OVER PREVENTION · POWER TRAIN:MANUAL TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customer Satisfaction Program 22N14 â Supplement #1 Certain 2011-2012 Model Year F-Series Super Duty Vehicles Equipped with a 6.7L Diesel Engine - State Inspection and Maintenance Test Failure Due to DTCs P2073 and/or P2074
Source components: BACK OVER PREVENTION:SOFTWARE · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2011-2023 F-Super Duty and 2016-2024 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit an elevated idle condition. During prolonged idle time, vehicles may experience this elevated idle to reduce unburned hydrocarbons from the SCR. The powertrain control module estimates hydrocarbon levels in the SCR and may increase idle speed to remove them. Idle speed will be increased to 1000 RPM for ambient temperatures near 26°C (80°F) and may increase to 1200 RPM at -40 °C (-40°F). Vehicles may exhibit exhaust smoke and diesel exhaust fluid smell during elevated idle condition. Exhaust smoke and smell condition will not affect reliability or durability of the engine. Power take-off (PTO) use and idle set point control will disable elevated speed. It is required that the operator monitor the vehicle and adhere to any Exhaust Filter warning messages.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2011-2022 F-Super Duty vehicles equipped with a 6.7L diesel engine may exhibit a ticking noise at idle after an engine oil change. It is often referred to as Typewriter Noise because of its similarity to the sound of a mechanical typewriter. When engine temperatures reach 150 ðF (65 ðC) or higher, (from engine idle up to approximately 1700 RPM's), this noise can typically be heard at the front wheel well and is often isolated to the transmission bell housing or oil pan area. Typewriter Noise is not detrimental to engine function or durability and has no short or long term effects on the engine. Do not attempt repairs to eliminate this noise. This noise is characteristic of the 6.7L diesel engine and will typically cease or diminish significantly within the oil change maintenance interval.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2011-2012 Model Year F-Series Super Duty Vehicles Equipped with a 6.7L Diesel Engine Powertrain Control Module Reprograming for Inspection and Maintenance Testing
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2011-2014 Model Year Super Duty Vehicles Equipped with a 6.7L Diesel Engine Exhaust Gas Recirculation Cooler with Diagnostic Trouble Codes P0401 and/or P2457 - In some of the affected vehicles, customers may experience an illuminated malfunction indicator light due to the EGR cooler becoming plugged with hydrocarbon or soot at high mileage. Diagnostic trouble codes (DTCâÂÂs) for EGR cooler efficiency below threshold (DTC P0401) and/or insufficient EGR flow at idle (DTC P2457) are stored when the malfunction indicator light is illuminated.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2011-2022 F-Super Duty and 2016-2023 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit an elevated idle condition. During prolonged idle time, vehicles may experience this elevated idle to reduce unburned hydrocarbons from the SCR. The powertrain control module estimates hydrocarbon levels in the SCR and may increase idle speed to remove them. Idle speed will be increased to 1000 RPM for ambient temperatures near 26°C (80°F) and may increase to 1200 RPM at -40 °C (-40°F). Vehicles may exhibit exhaust smoke and diesel exhaust fluid smell during elevated idle condition. Exhaust smoke and smell condition will not affect reliability or durability of the engine. Power take-off (PTO) use and idle set point control will disable elevated speed. It is required that the operator monitor the vehicle and adhere to any Exhaust Filter warning messages.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2011-2012 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P2073 and/or P2074 stored in the powertrain control module (PCM). This may be due to the software in the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM.
Source components: ELECTRICAL SYSTEM · EQUIPMENT · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customer Satisfaction Program 21M04 Certain 2011-2014 Model Year Super Duty Vehicles Equipped with a 6.7L Diesel Engine Exhaust Gas Recirculation Cooler with Diagnostic Trouble Codes P0401 and/or P2457
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 20112014 F-Super Duty vehicles equipped with 6.7L diesel engine may experience an exhaust leak due to broken exhaust manifold studs. New parts have been released to service this condition. Replace the exhaust manifold on the side with a broken stud. On cylinders 1,2,3,5,6 and 7 use stud part number W715713-S431. If replacing the studs on cylinders 4 and/or 8 use stud part number W717172-S900 and replace both studs and install new spacers and heat shields on the affected side(s). Refer to Workshop Manual, Section 303-01. Part numbers: heat shield left side, FC3Z-9Y427-A and DC3Z-9A462-B for the right side. Spacer part number FC3Z-00810-A. Exhaust manifold part numbers: DC3Z-9430-A (right) and DC3Z-9431-A (left). Exhaust Manifold Gasket FC3Z-9448-A. Exhaust Manifold Nut W701706-S430.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2011-2021 vehicles equipped with a diesel engine may have engine oil in the exhaust after turbocharger replacement for various reasons. To correct the condition, remove the exhaust and stand the exhaust up with the turbocharger inlet side facing down using a suitable drain pan. Allow the exhaust to drain for at least 24 hours and reinstall. Do not perform a manual exhaust regeneration.
Source components: ENGINE AND ENGINE COOLING · ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2005-2021 F-Super Duty 4x4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4x4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit is now available for customer purchase. The kit is designed for severe duty and is non warrantable. The knuckle seal shield kit GC3Z-54024A38-A includes an installation instruction sheet
NHTSA source summary · Original PDF not reviewed by Recallfolio
2011-2021 F-Super Duty and 2016-2021 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit a high/elevated idle condition. During prolonged idle time, vehicles may experience this high/elevated idle to reduce buildup of unburned hydrocarbons from the SCR system. The powertrain control module (PCM) estimates hydrocarbon levels in the SCR and may increase idle speed to remove them. Idle speed will be increased to 1000 revolutions per minute (rpms) for ambient temperatures near 26C (80F) and may increase to as high as 1200 rpms at -40 C (-40F). These elevated idle periods can last from 20-40 minutes, depending on ambient temperatures. During power take off (PTO) use and already using idle set point control, the elevated speed is disabled. It is required that the operator monitor the vehicle and adhere to the Exhaust Filter warning messages.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2011-2020 F-Super Duty, 2015-2019 Transit, 2016-2021 F-650/F-750 and 2018-2020 F-150 vehicles equipped with a 6.7L, 3.2L or 3.0L engine may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P207F, P20EE, P229F, P2201 and/or P24AE. This may be a result of using aftermarket cleaning liquids or tools for the exhaust gas recirculation (EGR) cooler or intake. Ford does not recommend the cleaning of diesel intakes or EGR coolers using any aftermarket tool that injects a cleaning foam or liquid substance into the EGR cooler or intake. Using these types of fluids can result in sodium poisoning of the NOx and particulate matter (PM) sensors resulting in degraded operation and permanent damage to the after treatment system. Use of these cleaning tools may void the emissions warranty of the hot end after treatment exhaust system and the attached emissions sensors.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING · FUEL SYSTEM, DIESEL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2005-2020 F-Super Duty 4x4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4x4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit is now available for customer purchase. The kit is designed for severe duty and is non warrantable. The knuckle seal shield kit GC3Z-54024A38-A includes an installation instruction sheet
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some remanufactured 6.7L diesel engines recently installed in 2011-2014 F-Super Duty vehicles may exhibit a lack of power with engine oil temperature (EOT) exceeding 125Ã âC (257Ã âF) under loads. This may also be accompanied by REDUCED ENGINE POWER being displayed in the message center and the coolant temperature gauge indicating H. This symptom may be due to a missing metering cup plug in the upper oil pan causing reduced oil flow through the oil cooler. Remanufactured engines built on 1-Mar-2019 and through 13-May-2019 may be affected. If a vehicle exhibits this concern, use the Report a Vehicle Concern link at the bottom of the OASIS tab and submit a report. Include the engine serial number and engine build date in the report. The dealership may be contacted for further details and possible repair direction.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2010-2020 vehicles may exhibit distorted glass with a subtle orange peel pattern or streaking etched into the surface. This is caused by hydrofluoric acid which is used in some car wash solutions as a cleaning agent. Hydrofluoric acid can attack the glass and cause visual distortion and/or discoloration on the outer surface which cannot be removed by further cleaning. If this type of distortion is found, inspect the area of the glass that is covered by the cowl and/or molding. The portion of glass that is covered by the cowl or molding will not be affected by the acid. Hydrofluoric acid damage is not a defect in material or workmanship and is not a warrantable condition.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2011-2019 F-Super Duty vehicles equipped with a 6.7L engine may come in for scheduled maintenance on the engine mounted fuel filter. When reconnecting a fuel line quick connect fitting back onto the engine mounted fuel filter housing, push the connector all the way onto the fuel filter connection port. For some vehicles, you may need to depress a retainer clip to lock the quick connect port into place. Once the fitting is latched fully onto the connection port, pull straight backward on the fuel line to verify it is fully latched onto the connection port. Do not bend the fuel line connection when pulling to verify it is connected. Refer to Workshop Manual sections 310-00 for details on quick connect fittings.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2005-2019 F-Super Duty 4x4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4x4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit is now available for customer purchase. The kit is designed for severe duty and is non warrantable. The knuckle seal shield kit GC3Z-54024A38-A includes an installation instruction sheet
NHTSA source summary · Original PDF not reviewed by Recallfolio
On vehicles equipped with an automatic transmission it is imperative that the converter pilot hub be greased with Motorcraft Multi-Purpose Grease Spray XL-5-A even if grease was not applied from the factory. Also verify that the engine/transmission alignment dowel pins are present as well as the engine crankshaft dowel pin, if equipped, when installing the transmission. Failure to adequately lubricate the converter hub greatly increases the likelihood of the flexplate cracking in the future. Missing dowels may cause a misalignment issue also resulting in a premature failure. Refer to Workshop Manual (WSM), Section 307-01.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2011-2016 F-Super Duty vehicles equipped with a 6.7L diesel engine may exhibit a lack of power and/or illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0299 in the powertrain control module (PCM). This may be due to the charge air cooler (CAC) outlet tube assembly becoming disconnected at the throttle body or a separation at the CAC tube crimp clamp. To resolve this concern, follow the Service Procedure steps to replace the CAC outlet tube assembly.Follow the service procedure steps to correct the condition.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SSM 47948 - 2010-2019 Various Vehicles - Turbocharged Engines - Oil Supply Filter Replacement When Replacing The Turbocharger Or The Turbocharger Oil Supply Tube For 2010-2019 vehicles equipped with turbocharged engines, when diagnosing and/or replacing turbo related concerns, all steps within the Workshop Manual (WSM) procedure must be followed including replacement of all mandatory discarded parts. When specified in the WSM, the turbocharger oil supply filter must be replaced whenever the turbocharger or the turbocharger oil supply tube are replaced. Turbocharger bearing failure may occur if oil starvation occurs due to a restricted filter.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2011-2019 F-Super Duty, 2015-2019 Transit, 2016-2019 F-650/F-750 and 2018 F-150 vehicles equipped with a 6.7L, 3.2L or 3.0L engine may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P207F, P20EE, P229F, P2201 and/or P24AE. This may be a result of using aftermarket cleaning liquids or tools for the exhaust gas recirculation (EGR) cooler or intake. Ford does not recommend the cleaning of diesel intakes or EGR coolers using any aftermarket tool that injects a cleaning foam or liquid substance into the EGR cooler or intake. Using these types of fluids can result in sodium poisoning of the NOx and particulate matter (PM) sensors resulting in degraded operation and permanent damage to the aftertreatment system. Use of these cleaning tools may void the emissions warranty of the hot end aftertreatment exhaust system and the attached emissions sensors.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE) · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This SKU is a front upper ball joint. The Customer communication requested return of unsold inventory to inspect for ball studs with excessive rotational friction in the ball joint assembly. Excessive friction in the ball joint assembly may cause a perceptible increase in steering effort.
NHTSA source summary · Original PDF not reviewed by Recallfolio
When performing diagnostics for DTCs P2201, P2452, P2459, P246C and/or P2463, a manual regeneration and diesel particulate filter (DPF) parameter reset using the appropriate scan tool may need to be performed. To perform the manual regeneration, go to the Toolbox tab > Powertrain > Service Functions > Diesel Particulate Regeneration System > DPF Manual Regeneration. The scan tool may indicate that a regeneration of the DPF is not recommended at this time, selecting YES on this screen will allow the regeneration process to complete. To perform the DPF parameter reset, go to the Toolbox tab > Powertrain > Service Functions > Diesel Particulate Regeneration System > DPF Parameter Reset.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2010-2018 various vehicles equipped with SYNC or SYNC 3 may not function when attempting to find or use the Spotify app via AppLink. As of an update released on 1/15/2018 Spotify will no longer be supporting their AppLink integration. No repair attempts should be attempted to correct this concern.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2011-2018 F-Super Duty 6.7L diesel equipped vehicles may exhibit a ticking noise at idle after an engine oil change. It is often referred to as Typewriter Noise because of its similarity to the sound of a mechanical typewriter. When engine temperatures reach 150 Å?F (65 Å?C) or higher, (from engine idle up to approximately 1700 RPM's), this noise can typically be heard at the front wheel well and is often isolated to the transmission bell housing or oil pan area. Typewriter Noise is not detrimental to engine function or durability and has no short or long term effects on the engine. Do not attempt repairs to eliminate this noise. This noise is characteristic of the 6.7L diesel engine and will typically cease or diminish significantly within the oil change maintenance interval.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2011-2018 F-Super Duty 6.7L diesel equipped vehicles may exhibit a ticking noise at idle after an engine oil change. It is often referred to as Typewriter Noise because of its similarity to the sound of a mechanical typewriter. When engine temperatures reach 150 Å?F (65 Å?C) or higher, (from engine idle up to approximately 1700 RPM's), this noise can typically be heard at the front wheel well and is often isolated to the transmission bell housing or oil pan area. Typewriter Noise is not detrimental to engine function or durability and has no short or long term effects on the engine. Do not attempt repairs to eliminate this noise. This noise is characteristic of the 6.7L diesel engine and will typically cease or diminish significantly within the oil change maintenance interval.
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles may exhibit a no start condition with an illuminated malfunction indicator lamp (MIL) and a DTC P161A after PCM replacement. This may be due to the parameter reset procedure not being properly completed. To clear this DTC, use the Ford Integrated Diagnostic System (IDS) service tool or Ford J2534 Diagnostic Software, select - Toolbox - Body - Security - PATS Functions - Parameter Reset. Follow the on-screen instructions to complete the procedure. This procedure will transfer the existing Key ID information between the modules without the need of having 2 programmed PATS keys present. There is no need to program keys when the PCM is going to be replaced. Additional information can be found in the Workshop Manual (WSM), Section 419-01. Missing or lost keys are not warrantable.
Source components: ELECTRICAL SYSTEM · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2011 2014 SuperDuty vehicles equipped with 6.7L Diesel engine may experience an exhaust leak due to broken exhaust manifold studs. New parts have been released to service this condition. Replace the exhaust manifold on the side with a broken stud. On cylinders 1,2,3,5,6 and 7 use stud part number W715713-S431. If replacing the studs on cylinders 4 and/or 8 use stud part number W717172-S900 and replace both studs and install new spacers and heat shields on the affected side(s). Refer to Workshop Manual Section 303-01. Part numbers: Heat shield left side, FC3Z-9Y427-A and DC3Z-9A462-B for the right side. Spacer part numbers: FC3Z- 00810-A. Exhaust manifold part numbers: DC3Z-9430-A (RH) and DC3Z-9431-A (LH). Exhaust Manifold Gaskets: FC3Z-9448-A. Exhaust Manifold Nut: W701706-S430
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2009-2017 VEHICLES EQUIPPED WITH A 6R80, 6R100, 6R140 AUTOMATIC TRANSMISSION HAVE AN UPDATED MAIN CONTROL VALVE BODY OVERHAUL PROCEDURE. REFER TO WORKSHOP MANUAL (WSM), SECTION 307-01 FOR MAIN CONTROL VALVE BODY (7A100) OVERHAUL PROCEDURES. NOT ALL VALVE BODIES REQUIRE REPLACEMENT. INSPECT THE VALVE BODY BORES, SPRINGS AND VALVES AS DIRECTED DURING DIAGNOSIS AND REPAIR. REFER TO GENERAL SERVICE BULLETIN (GSB) G0000093 AUTOMATIC TRANSMISSION MAIN CONTROL INSPECTION FOR A VIDEO CLIP TO AID IN THE DIAGNOSIS OF THESE REPAIRS.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME 2011-2017 F-SUPER DUTY 6.7L DIESEL EQUIPPED VEHICLES MAY EXHIBIT A TICKING NOISE AT IDLE AFTER AN ENGINE OIL CHANGE. IT IS OFTEN REFERRED TO AS TYPEWRITER NOISE BECAUSE OF ITS SIMILARITY TO THE SOUND OF A MECHANICAL TYPEWRITER. WHEN ENGINE TEMPERATURES REACH 150 ÅF (65 ÅC) OR HIGHER, (FROM ENGINE IDLE UP TO APPROXIMATELY 1700 RPM'S), THIS NOISE CAN TYPICALLY BE HEARD AT THE FRONT WHEEL WELL AND IS OFTEN ISOLATED TO THE TRANSMISSION BELL HOUSING OR OIL PAN AREA. TYPEWRITER NOISE IS NOT DETRIMENTAL TO ENGINE FUNCTION OR DURABILITY AND HAS NO SHORT OR LONG TERM EFFECTS ON THE ENGINE. DO NOT ATTEMPT REPAIRS TO ELIMINATE THIS NOISE. THIS NOISE IS CHARACTERISTIC OF THE 6.7L DIESEL ENGINE AND WILL TYPICALLY CEASE OR DIMINISH SIGNIFICANTLY WITHIN THE OIL CHANGE MAINTENANCE INTERVAL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME 2005-2017 F-SUPER DUTY 4X4 VEHICLES OPERATED IN EXTREME DUST, MUD OR TAR SAND CONDITIONS MAY EXHIBIT ACCELERATED 4X4 VACUUM HUB SEAL AND OR WHEEL BEARING WEAR AS A RESULT OF HARSH OPERATING CONDITIONS. A KNUCKLE SEAL SHIELD KIT IS NOW AVAILABLE FOR CUSTOMER PURCHASE. THE KIT IS DESIGNED FOR SEVERE DUTY AND IS NON WARRANTABLE. THE KNUCKLE SEAL SHIELD KIT GC3Z-54024A38-A INCLUDES AN INSTRUCTION SHEET.
NHTSA source summary · Original PDF not reviewed by Recallfolio
REPLACING THE ORIGINAL EQUIPMENT SYNC/NAVIGATION SYSTEM WITH EITHER AN AFTERMARKET SYNC/NAVIGATION KIT OR MODIFYING ORIGINAL SYNC/NAVIGATION PARTS TO PROVIDE ADDITIONAL FEATURES IS NOT RECOMMENDED NOR SUPPORTED ON ANY FORD, MERCURY OR LINCOLN VEHICLE. ONLY APPROVED GENUINE FORD ACCESSORIES OR ORIGINALLY INSTALLED SYSTEMS ARE SUPPORTED AND CERTIFIED TO FUNCTION CORRECTLY WITH OTHER VEHICLE SYSTEMS. IF YOU SUSPECT A SYSTEM HAS BEEN MODIFIED, THE FOLLOWING RESOURCES CAN BE USED TO VERIFY ORIGINAL EQUIPMENT: MONRONEY LABEL (WINDOW STICKER), PROFESSIONAL TECHNICIAN SOCIETY (PTS) OASIS TAB SELECT SYNC OR HVBOM. FOR GENUINE FORD ACCESSORIES USE: PTS WORKSHOP TAB SELECT DEALER INSTALLED ACCESSORY OR ACCESSORY INSTALLATION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This SKU is a filter cap kit. Based on feedback from our Customers, additional o-rings would need to be purchased separately by them to replace worn or aged seals. This Customer communication requested return of unsold inventory to add the three o-rings to the kits to improve Cusotmer satisfaction.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME 2011-2016 F-SUPER DUTY VEHICLES EQUIPPED WITH A 6.7L DIESEL ENGINE, MAY EXHIBIT AN ILLUMINATED MIL WITH DTCS P208E AND/OR P218F STORED IN THE POWERTRAIN CONTROL MODULE (PCM) MEMORY DUE TO UREA CRYSTALS FORMING ON THE REDUCTANT INJECTOR NOZZLE. FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME 2011-2016 F-SUPER DUTY PICKUP VEHICLES BUILT ON OR BEFORE 23-FEB-2016 AND EQUIPPED WITH A 6.7L DIESEL ENGINE MAY EXHIBIT A RUNS ROUGH/MISFIRE CONDITION ONLY DURING THE EXHAUST REGENERATION PROCESS. THIS CONDITION TYPICALLY OCCURS ON LIGHT THROTTLE TIP IN BETWEEN 64-113 KM/H (40-70 MPH) AND WILL NOT SET DIAGNOSTIC TROUBLE CODES (DTCS). THE CONCERN MAY BE INTERMITTENT AND A KNOCKING NOISE MAY BE PRESENT DURING THE CONCERN. FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Diesel customers may inquire about a Distance to Empty (DTE) warning message for the DEF system. It may be necessary to add up to 2.5 gallons of DEF for the system to detect a refill event and clear the DTE warning messages, however it is recommended to fill the tank to capacity, which may take up to 5 gallons. Driving conditions that increase fuel consumption will increase DEF consumption and will require additional fills between oil change intervals. If the DTE message is displayed and no Diagnostic Trouble Codes (DTCs) are present, read the Reduct_TNK_LV PID with the Integrated Diagnostic System (IDS). If it reads less than 100%, DEF must be added. If the message doesnt clear after the PID reads 100%, run the IDS SCR System Refill Activation routine.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOME 2011-2016 F-SUPER DUTY VEHICLES EQUIPPED WITH A 6.7L DIESEL ENGINE THAT ARE PRIMARILY IN A STATIONARY OR OFF-HIGHWAY LOW SPEED USE MAY EXHIBIT FREQUENT EXHAUST REGENERATION ATTEMPTS, DRIVE TO CLEAN MAINTENANCE MESSAGES, THE WRENCH LIGHT ON AND/OR DIAGNOSTIC TROUBLE CODE (DTC) P2459 FOR FREQUENT REGENERATION. IF REGENERATION ATTEMPTS ARE UNSUCCESSFUL, DTC P2463 MAY SET AS A RESULT OF SOOT ACCUMULATION IN THE DIESEL PARTICULATE FILTER (DPF). VEHICLES OPERATED IN THIS MANNER MAY NOT EASILY ALLOW FOR NORMAL EXHAUST REGENERATION AND MAY BENEFIT FROM OCR CAPABILITY SO THE UNIT CAN PERFORM COMPLETE REGENERATION CYCLES IN A STATIONARY SETTING. FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
6.7L DIESEL - FUEL KNOCK AT IDLE WITH MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATED WITH MULTIPLE DIAGNOSTIC TROUBLE CODES (DTCS) ISSUE Some 2011-2016 F-Super Duty vehicles equipped with a 6.7L diesel engine may exhibit a fuel knock type noise at idle, illuminated MIL with one or more of the following DTCs: P0263, P0266, P0269, P0272, P0275, P0278, P0281, P0284, P02DA, P02D0, P02D1, P02D2, P02D3, P02D4, P02D5, P02D6, P02D7, P02D8, P02D9, P02CC, P02CD, P02CE and/or P02CF stored in powertrain control module (PCM) memory.
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: SOME TRUCKS WILL OR MAY EXPERIENCE A LEANING TO ONE SIDE OF THE PICK UP BED OR BODY CAB AND MAYBE AFFECTED BY LOADING VEHICLE. MODEL 2011-16 F-SUPER DUTY. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: ON SOME DIESEL TRUCKS, VARIOUS COMBINATION OF DIAGNOSTIC TROUBLE CODES (DTC) FOR LOOSE, MODIFIED, DAMAGED OR MISSING GROUND G400 WHICH WAS RELOCATED BY BODY BUILDERS OUTFITTERS ON VEHICLE MODIFICATION. MODEL 2011-16 F SUPER DUTY. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: WHEN SOME DIESEL TRUCKS ARE IDLING, WOULD EXPERIENCE A TYPE OF FUEL KNOCKING NOISE WITH ONE OR MORE CYLINDER CONTRIBUTION BALANCE. MODEL 2011-16 F-SUPER DUTY. *PE
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL · FUEL SYSTEM, DIESEL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: NO SERVICE ACTION IS RECOMMENDED FOR THIS CONDITION. PLEASE USE AT YOUR DISCRETION. VARIOUS 2010-2015 VEHICLES MAY EXPERIENCE A TURBULENCE NOISE, SIMILAR TO AN HELICOPTER NOISE, AT HIGHWAY SPEEDS WHEN THE REAR DOOR WINDOW(S) OR SUNROOF ARE OPEN. *TA
Source components: VISIBILITY:POWER WINDOW DEVICES AND CONTROLS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: WHEN IDLING FOR LONG PERIODS OF TIME OR DRIVING SHORT DISTANCES, DURING EXHAUST REGENERATION PROCESS, SOME VEHICLES WILL EXPERIENCE A ROUGH RUN CONDITION AND DRIVE CYCLE INSUFFICIENT. MODEL 2011-15 F SUPER DUTY. *PE
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD 2011-2015 F-SUPER DUTY: BULLETIN INFORMATION INVOLVING PICKUP TRUCKS EQUIPPED WITH 6.7L DIESEL ENGINES RUNS ROUGH CONDITION ONLY DURING THE EXHAUST REGENERATION PROCESS.*LJ
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: ON SOME TRUCKS WITH ELECTRONIC 4WD SHIFT, AXLE SEAL (3254) NEEDS REPLACEMENT DUE TO VACUUM LEAKS AND IF REQUIRES REPAIR OR SERVICE, AXLE SEAL KIT IS AVAILABLE. MODEL 2011-15 F SUPER DUTY. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS TSB CONTAINS AN OWNER LETTER NOTIFICATION. SEE DOCUMENT SEARCH BUTTON BELOW. ON CERTAIN MODEL TRUCKS, WITH 6.7L DIESEL ENGINE EXHAUST GAS SENSORS, HAS EXTENDED COVERAGE APPLIED DUE TO ILLUMINATION OF SERVICE ENGINE SOON INDICATOR MALFUNCTIONING WITH EGT SENSORS. MODEL 2011-12 F-SUPER DUTY. *LJ UPDATED 9/10/15. *PE
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD 2011-2015 F-SUPER DUTY: CERTAIN VEHICLES WITH 6.7L DIESEL ENGINE BUILT BEFORE JAN. 30, 2015 MAY EXPERIENCE MIL WITH MULTIPLE TROUBLE CODES IN THE POWERTRAIN CONTROL MODULE MEMORY. *LJ
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: DELAYED REVERSE ENGAGEMENT, A 2-3 SHIFT FLARE AND/OR MALFUNCTION INDICATOR LIGHT (MIL) MAY BE EXHIBIT AFTER AN EXTENDED SOAK. MODEL 2011 F-SUPER DUTY. *PE
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: THERE IS A DELAYED TRANSMISSION ENGAGEMENT, INTERMITTENTLY, IN EITHER DRIVE OR REVERSE DUE TO ENGINE BEING OFF FOR 2-3 HOURS OR PUMP IS LOSING PRIME. MODEL 2011-12 F SUPER DUTY. *PE
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION · POWER TRAIN:MANUAL TRANSMISSION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: WITH MULTIPLE DIAGNOSTIC TROUBLE CODES (DTC) STORED IN POWERTRAIN CONTROL MODULE, THE MALFUNCTION INDICATOR LAMP (MIL) WILL ILLUMINATE. MODEL 2011-12 F-SUPER DUTY. *PE
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: SOME TRUCKS EXPERIENCING AN EXHAUST REGENERATION ATTEMPTS, DRIVE TO CLEAN MESSAGES, WRENCH LIGHT ON, WHEN PRIMARILY IN STATIONARY OR OFF HIGHWAY LOW SPEED USE. MODEL 2011-15 F-SUPER DUTY. *PE
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: PROCEDURE INFORMATION REGARDING THE CHANGE IN VEHICLE ATTITUDE APPEARANCE BY RAISING REAR OF TRUCK AND MODIFICATION STEPS ACCORDING TO SPECIFICATIONS OF ENGINEERING. MODEL 2011-15 F-250 SD. *PE
Source components: EQUIPMENT ADAPTIVE/MOBILITY · SUSPENSION:REAR:SPRINGS:LEAF SPRING ASSEMBLY:U-BOLT, LEAF SPRING TO AXLE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: SOME TRUCKS EXPERIENCING VARIOUS DIAGNOSTIC TROUBLE CODES (DTCS) STORED IN POWERTRAIN CONTROL MODULE (PCM) MEMORY AND DTCS CAN NOT BE DIAGNOSE UNTIL PCM MEMORY IS CLEARED OF DTCS. MODEL 2011-2015 F SUPER DUTY. *PE
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD/LINCOLN: THERE IS AN EXTENDED WARRANTY COVERAGE FOR THE LOSS OF ABS SPEED SIGNAL RELATED COMMUNICATION THAT DISABLE OBDII SYSTEM MONITORS FOR PCM REPROGRAMMING. MODEL 2011-14 F-SUPER DUTY, ESCAPE, TAURUS, FUSION, MKT, MKZ. *PE
Source components: ELECTRICAL SYSTEM:SOFTWARE · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: FUSE 33 NEED INSPECTING IN BATTERY JUNCTION BOX (BJB) FOR OPEN CONDITION IF TRUCKS EXHIBITING MALFUNCTION INDICATOR LAMP ILLUMINATION AND VARIOUS DTC WITH CRANK NO START OR ROUGH IDLE CONDITION. MODEL 2011-15 F SUPER DUTY. *PE
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD/LINCOLN: THERE WILL BE 2 NEW PIECE RECEIVER DRYER DESICCANT BAG THAT WILL REPLACE 1 PIECE RECEIVER DRY CARTRIDGE, WHICH ARE INTERCHANGABLE, FULLY, DO NOT AFFECT FORM, FIT, OR FUNCTION. MODEL 2011-14 F-SUPER DUTY, 2009-14 F150, 2007-14 EXPEDITION/NAVIGATOR. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: DUE TO A BROKEN EXHAUST VALVE, ON SOME TRUCKS, IT WOULD HAVE A NO CRANK OR RUNS ROUGH AND MULTIPLE DTC MAY BE STORE IN POWERTRAIN CONTROL MODULE (PCM) DUE TO DAMAGED GLOW PLUG. MODEL 2011 F-SUPER DUTY. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
LINCOLN/FORD: IN POWERTRAIN CONTROL MODULE (PCM), THAT ALLOWS ANTI LOCK BRAKE SYSTEM (ABS) AND OUTPUT SHAFT SPEED SENSOR (OSS) SIGNAL FAULTS, A SOFTWARE ERROR HAS OCCUR AND DISABLED ON BOARD DIAGNOSTIC (OBD) MONITORS WITH NO ILLUMINATION OF MALFUNCTION INDICATOR LAMP (MIL). MODEL 2011-2014 F-SUPER DUTY, ESCAPE, TAURUS,FUSION, MKT, MKZ. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: AFTER COLD START IN AMBIENT TEMPERATURES, THE ENGINE MAY EXPERIENCE A GROWLING, HISSING, METALLIC KIND OF NOISE. MODEL 2011-2015 F-SUPER DUTY. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: DURING MODIFICATIONS OF VEHICLE, MISSING, MODIFIED, DAMAGED, OR LOOSE GROUND G400, CAUSED MALFUNCTION INDICATOR LIGHT (MIL) ON AND MAY RELOCATE, FROM ORIGINAL LOCATION, BY BODY BUILDERS/UPFITTERS. MODEL 2011-2015 F-SUPER DUTY. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: WHEN SHIFTING BETWEEN PARK, REVERSE AND/OR DURING 2-3 SHIFT, AN INTERMITTENT CLUNK OCCURS WITH A TORQSHIFT TRANSMISSION. MODEL 2003-2014 F-SUPER DUTY, E SERIES, EXCURSION, F-53 MOTORHOME CHASSIS, LOW CAB FORWARD. *PE
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
LINCOLN/FORD: ON SOME VEHICLES AND TRUCKS, THERE IS A POPPING, SQUEALING, BINDING OR GRINDING NOISE COME FROM POWER SEATS WHEN MOVING BACKWARDS OR FORWARD. MODEL 2009-2015 F-150, TAURUS, FLEX, MKT, MKS, F-SUPER DUTY, EXPLORER. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: DUE TO POSSIBLE CONTAMINATION OF METAL, DIESEL EXHAUST FLUID (DEF), GASOLINE, A HIGH PRESSURE FUEL SYSTEM KIT IS NOW AVAILABLE, WHEN REPLACEMENT IS REQUIRED FOR DIESEL ENGINE. MODEL 2011-2014 F-SUPER DUTY. *PE
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: DUE TO POWERTRAIN CONTROL MODULE (PCM), ON SOME TRUCKS, EXHIBITS MALFUNCTION INDICATOR LAMP (MIL) AND DIAGNOSTIC TROUBLE CODE (DTC) P054F OF UNEXPECTED HIGHER QUANTITY OF FUEL AND IDLE CONTROL SYSTEM. MODEL 2011-2012 F-SUPER DUTY. *PE
Source components: ELECTRICAL SYSTEM:SOFTWARE · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: THE POWERTRAIN CONTROL MODULE (PCM) SOFTWARE MAY CAUSE DIESEL ENGINE TO HESITATE AT LOW SPEED OR HAVE AN INTERMITTENT SURGE TIP IN ACCELERATION. MODEL 2011-2012 F-SUPER DUTY. *PE
Source components: ELECTRICAL SYSTEM:SOFTWARE · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: THE EXHAUST REGENERATION MAY HAVE FREQUENT WARNING MESSAGES AND/OR WRENCH LIGHT ICON, IN INSTRUMENT PANEL, DUE TO DIESEL CHASSIS CAB BEING USED AS STATIONARY OR OFF-HIGHWAY. MODEL 2011-2012 F-SUPER DUTY. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: THE INSTRUMENT PANEL CLUSTER (IPC) IS ILLUMINATED WITH WARNING MESSAGE DISPLAYING EXHAUST FLUID SYSTEM FAULT AND POWERTRAIN CONTROL MODULE (PCM) SOFTWARE HAS IMPROVED MONITORS WITH AVAILABLE CALIBRATION. MODEL 2011-2012 F-SUPER DUTY. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD/LINCOLN: SOME TRUCKS ARE EXPERIENCING DIAGNOSTIC TROUBLE CODES (DTC) P2270 OR P2272, MALFUNCTION INDICATOR LAMP (MIL) COMES ON. MODEL 2010-2011 RANGER, 2010-2012 E SERIES, EXPEDITION, F-150, F-SUPER DUTY, NAVIGATOR. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: ON SOME TRUCKS, DUE TO A MISSING, LOOSE GROUND G400, THAT IS MODIFIED OR DAMAGED, THE MALFUNCTION INDICATOR LAMP (MIL) IS ON AND NEED TO BE CHECK FOR CLEANLINESS, PROPERLY SECURED, AND PRESENT, AND NOT HAVE BOLT HEAD BROKEN OFF. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: DUE TO CONTAMINATION OF FUEL, IN SOME TRUCKS, THERE IS EXHAUST SMOKE, LOW POWER, EXTENDED CRANK HARD START, NO START CRANK, RUNS ROUGH, SLOW TO BUILD OR LOW FUEL RAIL PRESSURE (FRP), ENGINE KNOCKING. MODEL 2011-2014 F-SUPER DUTY. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: THE DISTANCE TO EMPTY (DTE) MESSAGE WOULD BE CLEARED ONCE PROPER QUANTITY OF DIESEL EXHAUST FLUID (DEF) IS ADDED TO DEF TANK AND SHOULD BE FILLED AT OIL CHANGE INTERVAL. MODEL 2011-2015 F-SUPER DUTY. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: DIESEL EXHAUST FLUID (DEF) SYSTEM FAILURES ARE DUE TO PETROLEUM CONTAMINATION AND CAUSES THE MALFUNCTION INDICATOR LAMP (MIL) TO COME ON, AND WOULD REQUIRE REPLACEMENT OF PUMP, HEATER ASSEMBLY, AND TANK INJECTOR NOT COVERED BY WARRANTY. MODEL 2011-2014 F-SUPER DUTY. *PE
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: THE ARCHITECTURE OF TRUCK, OPTICAL DIFFERENCE, MAY CAUSE FRONT BODY CAB TO LEAN TO SIDE AND IS AFFECTED BY TRUCK LOADING. MODEL 2011-2014 F SUPER DUTY. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: LONGITUDINAL ACCELERATION SENSOR IS STORED IN ANTI-LOCK BRAKE SYSTEM (ABS) MODULE, CAUSING TRACTION CONTROL INDICATOR TO BE FLASHING OR ILLUMINATE. MODEL 2011-2014 F SUPER DUTY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: UREA CRYSTALS ARE FORMING IN DIESEL EXHAUST FLUID (DEF) INJECTOR NOZZLE DUE TO SELECTIVE CRYSTAL REDUCTION (SCR) DOSING OF RK7 MEASUREMENT TEST AND MAY NEED TO REINSTALL IF ZERO OR BELOW SPECIFIED 45-55ML. MODEL 2011-2014 F-SUPER DUTY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
FORD: SOME TRUCKS MAY EXPERIENCE AN OPTICAL DIFFERENCE WHERE IT APPEARS FRONT BODY CAB IS LEANING TO ONE SIDE DUE TO POSSIBLE VEHICLE LOADING. MODEL 2011-2014 F SUPER DUTY. *PE