Original record summaries, dates and identifiers for this model-year. Records 201–300 of 415, ordered newest first. Dated records on this page: Nov 10, 2022–Jan 10, 2024.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Jan 10, 2024Service Bulletin/Repair Instructions
S1408000384
NHTSA communication ID: 10251783
NHTSA source summary · Original PDF not reviewed by Recallfolio
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
NHTSA source summary · Original PDF not reviewed by Recallfolio
Engine Misfire From Intake Manifold Crack Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC) has been set: ? P0301 - Cylinder 1 Misfire. Customers may also experience one or more of the following: ? Rough engine idle. ? Shakes while driving. This bulletin involves inspecting and if needed replacing the intake manifold for a crack.
NHTSA source summary · Original PDF not reviewed by Recallfolio
COOLER Engine Oil Please be aware that the oil cooler seal is serviceable as a standalone part and should be considered for replacement as a remedy for fluid leak.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Pitch and Roll are not Displayed on SRT Performance Pages Customers may experience: Pitch and Roll are not displayed in the SRT Performance Pages Fig. 1. This bulletin involves using wiTECH to perform a Restore Vehicle Configuration.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Hydraulic tensioner Before replacing any Front End Accessory Drive components, please check Accessory Drive belt routing as per engine sales code. Customer complaints may include a noise coming from under de hood described as a squeal, screech, squeak, chirp or "belt related" noise and/or noisy tensioner/pulley. Please check Service Library for any STAR Online publications that may apply. Note: If it is found that the pulleys and/or tensioners are to blame for the noise please use an stethoscope or similar tool to determine the origin of the noise and include it in the narrative.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Body Control Module For concern related to DTC U0140 - Lost Communication with Body Control Module, please follow published diagnostic information for this DTC to ensure all module connections are secure. Please check all the connections at BCM from other modules that could potentially report a loss of communication with the BCM and ensure that they are fully seated as per diagnostic information. Some affected modules may include : HVAC;LBSS;RBSS;IPC;OCM;ICS;TBM;TCM;MSM;CSWM;ITBM;PCM;PTS/PAM;ESM;RFHUB;DSM;DTCM;IBS;AHLM;ABS;ORC;PLGM;DDM,DMFL;PDM;DMFR;EPS;ACC;FFCM;HVAC_R *Ensure to check all the wiring harness connected to BCM with Other Modules are proper. *Please disconnect the Battery Negative Cable for 15 minutes and then reconnect. *Clear the codes and check to see if any active DTC's return for U0140 *If still DTCs U0140 presents then contact Engineering Expert : FCA REDACTED CONTENT.
Source components: ELECTRICAL SYSTEM · ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Body Control Module For concern related to DTC U0140 - Lost Communication with Body Control Module, please follow published diagnostic information for this DTC to ensure all module connections are secure. Please check all the connections at BCM from other modules that could potentially report a loss of communication with the BCM and ensure that they are fully seated as per diagnostic information. Some affected modules may include: HVAC; LBSS; RBSS; IPC; OCM; ICS; TBM; TCM; MSM; CSWM; ITBM; PCM; PTS/PAM; ESM; RFHUB; DSM; DTCM; IBS; AHLM; ABS; ORC; PLGM; DDM, DMFL; PDM; DMFR; EPS; ACC; FFCM; HVAC_R *Ensure to check all the wiring harness connected to BCM with Other Modules are proper. *Please disconnect the Battery Negative Cable for 15 minutes and then reconnect. *Clear the codes and check to see if any active DTC's return for U0140*If still DTCs U0140 presents then contact Engineering Expert : FCA Redacted Content
NHTSA source summary · Original PDF not reviewed by Recallfolio
Cold Engine Ticking Noise From Exhaust Manifold Area The customer may describe an ticking noise from the exhaust manifold location(s) when cold. This bulletin involves replacing the exhaust manifolds.
NHTSA source summary · Original PDF not reviewed by Recallfolio
LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
NHTSA source summary · Original PDF not reviewed by Recallfolio
PUMP Water For 2016-2024MY 3.6L Pentastar Upgrade with suspected coolant leak. PRIOR TO PERFORMING ANY WATER PUMP REPLACEMENT, PROCEED WITH INSPECTION INSTRUCTIONS FROM THE LATEST VERSION OF STAR ONLINE PUBLICATION S2307000002. Please submit pictures of the leak area thru the DIDI process outlined in the STAR Online document. NOTE: Some coolant residue may be found at the water pump weep hole plug area which may be normal, but coolant should not be dripping from this location. If unsure about, use the Pressurized Coolant System Inspection process as found in the Dealer Connect Cooling Diagnosis and Testing Procedures.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING.
NHTSA source summary · Original PDF not reviewed by Recallfolio
PUMP Water For 2016-2024MY 3.6L Pentastar Upgrade with suspected coolant leak. PRIOR TO PERFORMING ANY WATER PUMP REPLACEMENT, PROCEED WITH INSPECTION INSTRUCTIONS FROM THE LATEST VERSION OF STAR ONLINE PUBLICATION S2307000002. Please submit pictures of the leak area thru the DIDI process outlined in the STAR Online document. NOTE: Some coolant residue may be found at the water pump weep hole plug area which may be normal, but coolant should not be dripping from this location. If unsure about, use the Pressurized Coolant System Inspection process as found in the Dealer Connect Cooling Diagnosis and Testing Procedures.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING · ENGINE AND ENGINE COOLING:COOLING SYSTEM:PUMP.
NHTSA source summary · Original PDF not reviewed by Recallfolio
STARTER Engine Due to starter No Trouble Found claims, please contact FCA Redacted Content prior to repair. If no response in 15 minutes, proceed with repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Radio Firmware Over The Air (FOTA) Update from R16.28 or R17.98 to R17.99 Software Version Customers may experience one or more of the following: ? Radio resets at times. ? Wireless disconnects. ? Intermittent display screen blank. ? Radio slow to respond and lockup. ? Radio inoperative intermittently. ? Apps not able to update. Additional enhancement included with this software update: ? CarPlayT and Android AutoT improvements and robustness added. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from R16.28 and R17.98 (RU) and from R17.98 (WD) to R17.99. NOTE: The National campaign for this FOTA update launched September 8, 2023.
NHTSA source summary · Original PDF not reviewed by Recallfolio
POWER DRIVE UNIT LIFTGATE OPEN For concern of Power Liftgate Inoperative (not opening/closing), please contact FCA Redacted Content before performing repairs. If no response in 15 minutes, proceed with repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
NHTSA source summary · Original PDF not reviewed by Recallfolio
Fuel Nozzle Premature Shut Off The customer may experience the following: ? Hard to fill fuel tank, premature fuel nozzle shut off. This bulletin involves inspecting and replacing the fuel filler tube
NHTSA source summary · Original PDF not reviewed by Recallfolio
PUMP, Vacuum For DTC Code P258B - ELECTRONIC VACUUM PUMP PERFORMANCE. Due to brake vacuum pumps returned with trouble not found, please follow the proper diagnostics outline in the service library this also includes checking all electrical and vacuum hose connections prior to replacement of the vacuum pump. This will avoid unnecessary repair and potential charge back on the vacuum pump.
Source components: ELECTRICAL SYSTEM · SERVICE BRAKES · SERVICE BRAKES, HYDRAULIC:POWER ASSIST:VACUUM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Telematics Box Module (TBM) wiTECH update to 4.36 Customers may experience one or more of the following: ? Uconnect box requires service message (Fig. 1) . ? Uconnect box backup ?battery low? message on the radio. ? WiFi hotspot streaming lost. ? Rear mirror LED blinking after ignition cycle. ? Uconnect App charge schedule / climate schedule setup issue. ? Customer not seeing profile or other vehicle information on the mobile app. This bulletin involves updating the TBM software from 4.27i to 4.36.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Chirp Noise From Third Row Seat Headrest Chirp noise from third row seat headrest. This bulletin involves inspecting and possibly adding grease to the third row seats headrests.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Engine Ticking Noise Engine makes an abnormal ticking noise. There may be Diagnostic Trouble Codes (DTC)s present. This bulletin involves inspecting and if needed, replacing the intake HLAs. NOTE: **ALL VEHICLES ON THE RSU VIN LIST REQUIRE ALL 12 INTAKE HYDRAULIC LASH ADJUSTERS TO BE REPLACED**.
NHTSA source summary · Original PDF not reviewed by Recallfolio
License Plate LED Light Inoperative - Moisture Visible Within the Lens The customer may experience the following: ? There is a potential for water intrusion which over time could lead to an inoperable license plate lamp. Customers may comment on one or more of the following: ? License plate LED light is inoperable. ? Moisture in the license plate lamp housing. This bulletin involves inspecting the license plate LED lamp for being inoperative or visible signs of moisture within the LED lamp housing and if necessary replacing the LED and installing a additional O-ring and foam gasket to the license plate applique
NHTSA source summary · Original PDF not reviewed by Recallfolio
PSU right intake camshaft Case 1) If you are to flash the PSU (Pentastar Upgrade Engine) PCM due to P0300 code presence, only AB or previous LEVEL PSU right intake camshaft PN 05047913AA or AB (old version) should be replaced. If the engine is equipped with the AC/AD LEVEL PSU right intake camshaft PN 05047913AC or AD (new version), camshaft should NOT be replaced. Case 2) If the intake camshaft or intake rocker arm has excessive wear on the high lift profile (Rocker arm: slider, Camshaft: central lobe), replace the intake camshaft (1) in that cylinder head and all intake rocker arms (6).
Source components: ENGINE AND ENGINE COOLING:ENGINE:CRANK/CAMSHAFT POSITION SENSOR.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Engine Ticking Noise Engine makes an abnormal ticking noise. There may be Diagnostic Trouble Codes (DTC)s present. This bulletin involves inspecting and if needed, replacing the intake HLAs.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Incorrect Instrument Panel Cluster (IPC) IPC is missing graphics and/or the speedometer, digital tire pressure and temperature units are incorrectly displayed for market (Metric/Imperial) (Fig. 1) . NOTE: Speed unit of measure can still be viewed in MPH from the center display (when analog speedometer is displaying KPH) and toggled to the correct units required for the market. Low tire pressure warning still functions properly. This bulletin involves replacing the IPC.
Source components: ELECTRICAL SYSTEM · ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Telematics Box Module (TBM) Over The Air Software Update to 4.36 Customers may experience one or more of the following: ? Uconnect pop up box error or requires service message. ? Losing WiFi Hotspot streaming connection: internet data is not reliable. ? LED blinking on overhead console after ignition cycle. ? User is unable to setup the Charge schedule/Climate schedule events in Uconnect App (TBM is sending failure message). This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The TBM software will be updated from (WD - 4.27i.) and (RU - 4.29d) to 4.36.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Incorrect Gear Shift Indicator Console And Armrest Console Stitching Color Gear shift indicator console, bezel and armrest console is wrong color. This bulletin involves replacing the gear shift indicator console, bezel and armrest console.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Radio Frequency Hub Module (RFHM) Updates The customer may describe that they heard about these vehicles that can be unlawfully driven away by thieves when they are able to program new key fobs through the RFHM. Software enhancement include: ? Update to the RFHM software to prevent hackers from programming their own key fob to the vehicle. ? This is intended to deter an unwanted drive off of the vehicle without the customers knowledge.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Headlamp Condensation Clearing Procedure Some customers may report that on occasion, vehicle exterior head lamp assemblies are fogged with a light layer of condensation on the inside of the lenses (Fig. 1) . This bulletin is to communicate the procedure for head lamp condensation clearing.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Headlamp Condensation Clearing Procedure Some customers may report that on occasion, vehicle exterior head lamp assemblies are fogged with a light layer of condensation on the inside of the lenses (Fig. 1) . This bulletin is to communicate the procedure for head lamp condensation clearing.
NHTSA source summary · Original PDF not reviewed by Recallfolio
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
NHTSA source summary · Original PDF not reviewed by Recallfolio
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
NHTSA source summary · Original PDF not reviewed by Recallfolio
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
NHTSA source summary · Original PDF not reviewed by Recallfolio
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Loose Air Duct Connection at Throttle Body Customer may experience the following: ? Poor engine performance. ? Drone noise from the engine area. This bulletin involves inspecting and if necessary tightening the clamp on the air duct assembly to the throttle Body
NHTSA source summary · Original PDF not reviewed by Recallfolio
ENGINE ASSY - 3.6L AUTO TRANS Before replacing the engine due to an abnormal ticking noise, please check that the INTAKE Hydraulic Lash Adjusters are not "collapsed". If a collapsed INTAKE HLA is found, replace all INTAKE HLAs on the suspect cylinder head. The noise can occur at low or high RPMs, and at low or high temperatures. There are no Diagnostic Trouble Codes (DTC)s present. CAUSE: INTAKE Hydraulic Lash Adjuster may have a manufacturing issue that can cause the plunger to stick, generating valvetrain noise.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Loose Air Duct Connection at Throttle Body Customer may experience the following: ? Poor engine performance. ? Drone noise from the engine area. This bulletin involves inspecting and if necessary tightening the clamp on the air duct assembly to the throttle Body
NHTSA source summary · Original PDF not reviewed by Recallfolio
ENGINE ASSY - 3.6L AUTO TRANS Before replacing the engine due to an abnormal ticking noise, please check that the INTAKE Hydraulic Lash Adjusters are not "collapsed". If a collapsed INTAKE HLA is found, replace all INTAKE HLAs on the suspect cylinder head. The noise can occur at low or high RPMs, and at low or high temperatures. There are no Diagnostic Trouble Codes (DTC)s present. CAUSE: INTAKE Hydraulic Lash Adjuster may have a manufacturing issue that can cause the plunger to stick, generating valvetrain noise.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Bright SRT Brake and Accelerator Pedals not Installed The SRT Bright Brake and Accelerator Pedal Pads are not installed. This bulletin involves inspecting and possibly installing SRT bright brake and accelerator pedal pads.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Bright SRT Brake and Accelerator Pedals not Installed The SRT Bright Brake and Accelerator Pedal Pads are not installed. This bulletin involves inspecting and possibly installing SRT bright brake and accelerator pedal pads.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Loud Noise from Front Wheel Area The technician of customer may notice one or more of the following: ? A loud noise from the front wheel area (worse on turns). ? A humming or clunk noise, brake pulsation, or vibration in the steering wheel. This bulletin involves tightening both front wheel bearing to knuckle joint bolts to spec.
Source components: BACK OVER PREVENTION · POWER TRAIN · STEERING · STEERING:LINKAGES:KNUCKLE:SPINDLE:ARM · SUSPENSION · WHEELS · WHEELS:LUGS/NUTS/BOLTS/STUDS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Loud Noise from Front Wheel Area The technician of customer may notice one or more of the following: ? A loud noise from the front wheel area (worse on turns). ? A humming or clunk noise, brake pulsation, or vibration in the steering wheel. This bulletin involves tightening both front wheel bearing to knuckle joint bolts to spec.
Source components: BACK OVER PREVENTION · POWER TRAIN · STEERING · SUSPENSION · WHEELS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
A-Pillar Trim is Warped Customers may comment on one or more of the following: One or both A-Pillar trim is warped and/or not seated. A-Pillar trim squeaks or rattles. This bulletin involves inspecting and possibly replacing one or both A-Pillar trims.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
NHTSA source summary · Original PDF not reviewed by Recallfolio
6.4L Rubbed Through Coolant Hose This bulletin involves inspecting the oil cooler coolant hose and possibly replacing it. Customers may experience the following: An engine coolant leak under the hood. This coolant leak is caused from the oil coolercoolant hose contacting the engine serpentine belt resulting in a rub through condition on the oil cooler hose.
Source components: ENGINE AND ENGINE COOLING · FUEL SYSTEM, GASOLINE.