2014 Chevrolet VOLT Manufacturer communications & TSBs.Page 16
Original record summaries, dates and identifiers for this model-year. Records 1,501–1,600 of 1,655, ordered newest first. Dated records on this page: May 23, 2013–Nov 11, 2013.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Nov 11, 2013Service Bulletin/Repair Instructions
00-06-01-026E
NHTSA communication ID: 10118866
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational Bulletin provides a revision for 00-06-01-026D to add the 2014 model year.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician that the Battery Charger part numbers 22799689 and 24265980 is being placed on restriction through the General Motors Technical Assistance Center. Dealer will need to contact General Motors Technical Assistance Center for further assistance.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary bulletin provides a procedure to inspect and connect the coax cable on the back of the navigation radio to correct the customers concern of the multiple navigation issues.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary Informational bulletin provides information on Battery Test Cold Cranking Amperage (CCA) for Original Equipment Batteries and Testing Tips.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician that the Human Machine Interface, Radio or Tuner, radio controls, Integrated Center Stack, display, and Media Disc Players are placed on restriction through the General Motors Technical Assistance Center. Dealer will need to contact General Motors Technical Assistance Center for further assistance.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about customers that may complain of various concerns when using Bluetooth components. Technician should use the Preliminary Information to gather information from the customer on their Bluetooth device and the concern they are having before calling General Motors Technical Assistance Center.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have Service Vehicle Soon Lamp or Check Engine Lamp is on. Technician may find Diagnostic Trouble Code P0534. Technician will use a scan tool to check for all Diagnostic Trouble Codes that are set, but should not delete any Diagnostic Trouble Codes found. Technician should also capture any Freeze Frame data in a Global Diagnostic System 2 Session Log. Technician will need to inspect the Rechargeable Energy Storage System and replace if it has three notches. On Volt and Ampera models check the Hybrid Processor Control Module 2 for having the latest software. Technician should update the Hybrid Processor Control Module 2 with the latest calibrations if need. If the module is up to date use Global Diagnostic System 2 to monitor the High and Low Side Refrigerant Pressures with the Air Conditioner Compress or Speed with the Heater-Vent-Air Conditioning temperature to maximum cold, high blower speed. Technician should follow published Service Information diagnostics if Diagnostic Trouble Code P0534 sets. If the technician finds both the High and Low Side Refrigerant Pressures are found to be low then connect the Refrigerant Recovery/Recharge Air Condition machine and check the Refrigerant level. Technician should follow "Refrigerant Loss" in Service Information Diagnostics if the refrigerant level is less than 800 grams. When working on Spark Electric Vehicle technician should follow all published Service Information diagnostics before and other diagnostics or repairs. Technician should use the GE-50300 Refrigerant Recovery/Recharge Air Condition machine and check the R1234yf Refrigerant level. If the Refrigerant level is low technician should follow published Service Information diagnostics. If the Refrigerant level is over 500 grams technician will use Global Diagnostic System 2 to verify if the Remote Heater and Air Conditioning Module is up to date and update if
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that are unable to charge the hybrid battery and the malfunction Indicator lamp is illuminated on the Instrument Panel Cluster. Technician may find a current or history code P16C1 or P16C2 set in the Battery Charging Control Module. Technician should update the Battery Charging Control Module with the latest software in Tis 2 Web. If the technician experiences any issues while programming the Battery Charging Control Module, please contact Techline customer support center for further assistance.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that will not charge and Service Engine Soon Malfunction Indicator Lamp on. Technician may find Diagnostic Trouble Codes P0AA6 and/ or a P1F0E set on 2011-2013 Volt or a P0DAA on 2014 Volt or Cadillac ELR in the Hybrid Powertrain Control Module 2. Technician will need to inspect the coolant level in the Hybrid/EV Battery Pack. If the coolant is found low follow published Service Information diagnostics. Technician will need to inspect the Hybrid/EV Battery Pack drain plug, located on the battery tray, regardless of fluid level at the Hybrid/EV Battery Pack coolant reservoir. If any moisture is found during the drain plug inspection, contact the General Motors Technical Assistance Center for further assistance. If the coolant level in cooling system is at the proper level and there is no moisture in the battery during the drain plug inspection, and the coolant freeze protection is between -10 and -40 degrees Fahrenheit, technician will need to gather all measurements recorded while evaluating Diagnostic Trouble Code P0AA6 and contact the GM Technical Assistance Center for further assistance.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have an OnStar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down, remove power to the OnStar module for five minutes. After the power has been removed for five minutes, if the OnStar system is working release the vehicle. If the OnStar system is still inoperative continue with published Service Information diagnostics. Technician may need to contact General Motors Technical Assistance Center depending on the STID, Station ID, or OnStar Customer Identifier.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D-37 history in the Vehicle Communication Interface Module or telematics communication interface control module. Engineering has determined that this code will only display in history on the scan tool and will not cause issues with OnStar system operation.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D stored in Telematics Communication Interface Control Module. Technician will need to call General Motors Technical Assistance Center for further assistance. If the Diagnostic Trouble Code B101D has a sym 37 set please refer to the latest version of PIC5492.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about the percentage of UV protection or tint offered by the windshield or side glass. Technician should be advised Windshield reduces UV rays down to 4% or less. Front side door glass reduces UV rays down to 35% or less. Windshields are SOLAR glass with a light transmittance of >/=70%. Front door glass are Solar glass with a light transmission of >/=70%. Rear door glass, quarter windows and back windows can use either Solar glass (>/=70%) or Privacy glass, which has a light transmittance of 20%.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have Service Vehicle Soon Lamp or Check Engine Lamp is on after charging using a 240V charging station. Technician may find a Diagnostic Trouble Code P1EE6 stored current or history. Technician should follow the latest version of Bulletin 12-08-45-001 Diagnostic Information for Intermittent 110/220V AC Plug-In Charging. Technician should also follow published Service Information diagnostic for the Diagnostic Trouble Code that is set.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have a engine noise is sometimes louder than expected. Also will explain the known normal and abnormal reasons why the engine may be louder. When the vehicle speed is between 25-50 miles per hour the road noise does not mask the engine noise this is considered normal. When the vehicle is first started for the day the system will perform a catalyst preconditioning for about a minute. At this time the engine will seem louder than normal, this is normal. At times the engine often runs at wide open throttle, but at a reduced speed. This sound is uncharacteristic of a four-cylinder engine in a traditional sedan, but is a characteristic of an extended range electric vehicle such as the Chevrolet Volt. Technician will be able to inspect for abnormal induction ground-out conditions. These locations should be checked lower rubber isolator on air box not installed correctly or missing, upper induction resonator cover not installed properly, refrigerant line not bolted to engine support bracket, and throttle body contacting coolant pipes behind it. Abnormal exhaust ground-out conditions should also be inspected. These locations are at the exhaust clamp rearward of the second catalytic converter is contacting the battery heat shield, exhaust resonator underbody is contacting the heat shield. Repair any abnormal issue found.
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY · ENGINE AND ENGINE COOLING:ENGINE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician with the steps to diagnose and repair vehicles with a Malfunction Indicator Lamp on. Technician may find a Diagnostic Trouble Code P0335 and or P0336 stored in the Power inverter module. Technician will need to inspect G113 if the ground eyelet is not tight replacing the bolt with a shorter bolt. If either of the Diagnostic Trouble Codes P0335 or P0336 are stored in both the Engine Control Module and the Power inverter module or the codes are current, please follow published Service Information diagnostics. If the vehicle is a model year 2014, update the Power Inverter Module with the latest software in TIS2Web.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician what affects electric range and provides driving tips for better energy efficiency. Vehicles may have an electric range is less than customer expectations or what is being displayed on the in-vehicle display for EV range. The distance you can go in an electric vehicle varies with the outside temperature. All electric vehicles are less efficient in cold or hot conditions. This is a function of battery storage capability and increased use of cabin heat and/or air conditioning in these conditions. The vehicle must also maintain a consistent battery temperature in order to maintain desired long term performance. Tire pressure can have an impact on the electric range also. Additionally tire pressures can change with temperature changes. In order to maximize your electric range, ensure that your tires are properly inflated. For proper tire pressure, review the Owner?s manual and the vehicle tire and loading information label. Using the heat and air conditioning systems decreases the energy available for electric driving. Optimal energy efficiency is achieved with the heat, air conditioning, and fan turned off. Driving uphill requires more energy and can reduce electric range.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician on the steps to vacuum fill to ensure the cooling system is properly filled. Technician will need to use special tool GE-47716 Vac-N-Fill Coolant Refill Tool. Technician will also perform Hybrid/EV Battery Pack Coolant Pump Bleed Procedure in the GDS2 tool. After performing the GDS2 coolant bleed procedure drive vehicle for approximately 5 miles in a slalom type of situation to purge any remaining air from battery pack cooling plates.
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY · ENGINE AND ENGINE COOLING.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have an OnStar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down, remove power to the OnStar module for five minutes. After the power has been removed for five minutes, if the OnStar system is working release the vehicle. If the OnStar system is still inoperative continue with published Service Information diagnostics. Technician may need to contact General Motors Technical Assistance Center depending on the STID, Station ID, or OnStar Customer Identifier.
Source components: ELECTRICAL SYSTEM · EQUIPMENT ADAPTIVE/MOBILITY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a check engine light on. Technician will find Diagnostic Trouble Codes P0700 set in the Engine Control Module and P0797 set in the Transmission Control Module. Technician should use published Service Information diagnostics for the Diagnostic Trouble Codes.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that display a ?Propulsion Power is Reduced? in the Driver Information Center when driving in the mountains. Dealer should advise the customer the vehicle should be placed in Mountain Mode on the vehicle when the vehicle has a full charge if their travel plans involve mountainous driving before the next charge event.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician that the Human Machine Interface, Radio or Tuner, radio controls, Integrated Center Stack, display, and Media Disc Players are placed on restriction through the General Motors Technical Assistance Center. Dealer will need to contact General Motors Technical Assistance Center for further assistance.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about installing General Motors Accessory pats. Technician can check Service Information for some accessories. Technician can also contact Partech for assistance.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on Part Restriction and Ordering Process Information for OnStar Vehicle Communication Interface Modules (VCIM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provide policy information on GM of Canada New Vehicle Limited Warranty Tire Program and Global Warranty Management (GWM) Submission Information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provide policy information on a revised customer concern not duplicated/verified labor operation numbers and how to submit CCND.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM · EQUIPMENT ADAPTIVE/MOBILITY · EQUIPMENT:APPLIANCE:AIR CONDITIONER · EQUIPMENT:ELECTRICAL · POWER TRAIN:AXLE ASSEMBLY · SERVICE BRAKES.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician with a diagnostic tip service steering message or service stability message. Technician may find a Diagnostic Trouble Code C056E Sym 42 and a Diagnostic Trouble Code C0569 Sym 3A setting after a new steering gear assembly was installed. If Diagnostic Trouble Code C0710 Sym 71 is set it must be addressed first before performing a steering gear ?set-up? in Service Programming System. Steering Angle Sensor module Diagnostic Trouble Code C056D Sym 00 and it must be address first. Technician should be advised that Diagnostic Trouble Codes DTC C056E Sym 42 or C0569 Sym 3A will set when a steering gear assembly when is was replaced without Service Programming System programming.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that the OnStar system will not connect. Technician should record module info per the latest version of PIC4310 and contact General Motors Technical Assistance Center.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about the Samsung Galaxy S III will lose connection to the vehicle or does not connect to the vehicle. Customer can update the phone with the latest Android system software which begins with Android 4.4 version.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about servicing any of the cooling systems on the these vehicles, which includes the High Voltage Battery Assembly, pumps, reservoirs, hoses, air separators, radiators, PIM, engine or heater system it is important to use the proper coolant and water mixture. The Power Electronics / Charging and Battery Cooling systems require a 50/50 mix of GM DEX-COOL® and de-ionized water.
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY · ENGINE AND ENGINE COOLING.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary information bulletin provides information on poor or no transmitter range when using the remote keyless entry (RKE) and/or remote vehicle start (RVS).
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that the vehicle did not fully complete a charge or that charging was interrupted. Technicians may find Diagnostic Trouble Codes P1E00 set in the Engine Control Module and P0D3E or P0D3F set in the Hybrid Powertrain Control Module. Technician will need to update the Battery Charger Control Module to address this concern.
Source components: ELECTRICAL SYSTEM · ELECTRICAL SYSTEM:12V/24V/48V BATTERY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides a revision for 12-02-32-002 to add the 2013-2014 model years, add noise as a possible condition and add a Note in the Instructions section.
Source components: STEERING · STEERING:HYDRAULIC POWER ASSIST:POWER STEERING FLUID.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Passenger Presence System (PPS) May Command Seat Belt Reminder Chime and Passenger Airbag Indicator On When Electronic Devices or Conductive Objects are Placed on Front Passenger Seat
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides a revision for PI0574A to include the 2013-2014 model year vehicles, update the covered models and the Recommendation/Instructions section.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information for Transport Mode On Message Displayed in Driver Information Center (DIC) and/or Battery Light is Flashing (Follow Procedure as Outlined Below) Condition.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides a revision for 11-00-89-005D to add additional Mandatory Minimum Tables and additional information concerning Policy decision making.