The manufacturer’s record · Page 1 of 2
Original record summaries, dates and identifiers for this model-year. Records 1–100 of 140, ordered newest first. Dated records on this page: Mar 4, 2024–Aug 20, 2026.
Back to 2023 Toyota SIENNA HYBRID problems & recallsThis archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
NHTSA communication ID: 11037202
NHTSA source summary · Original PDF not reviewed by Recallfolio
OBSOLETE NOTICE August 20, 2026: This bulletin is now obsolete. Please see T-SB-0051-26.
Campaign / software reference: T-SB-0110-20 Obsolete
Source components: ENGINE.
Source record 11037202 at NHTSANHTSA communication ID: 11037201
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin includes basic procedures for performing a rescue charge at battery on high voltage (HV) Ni-MH and Li-ion batteries.
Campaign / software reference: T-SB-0051-26
Source components: ENGINE.
Source record 11037201 at NHTSANHTSA communication ID: 11033412
NHTSA source summary · Original PDF not reviewed by Recallfolio
Although the HV Floor Under Wire Harness and Rear Traction Motor Cable is covered by Toyota’s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers’ ownership experience. Toyota is providing extended coverage under this Customer Support Program for repairs related to excessive corrosion to the wire harness connections at the Rear Motor Generator. Excessive corrosion can cause AM Radio Static during certain drive cycles, or the vehicle may not start.
Campaign / software reference: 22TE09
Source components: ELECTRICAL SYSTEM.
Source record 11033412 at NHTSANHTSA communication ID: 11029896
NHTSA source summary · Original PDF not reviewed by Recallfolio
OBSOLETE NOTICE February 27, 2026: This bulletin is no longer applicable and is now obsolete.
Campaign / software reference: T-SB-0104-21 Obsolete
Source components: ENGINE.
Source record 11029896 at NHTSANHTSA communication ID: 11028726
NHTSA source summary · Original PDF not reviewed by Recallfolio
OBSOLETE NOTICE January 30, 2026: This bulletin is now obsolete. Please see T-SB-0001-26.
Campaign / software reference: T-SB-0106-22 Obsolete
Source components: ELECTRICAL SYSTEM.
Source record 11028726 at NHTSANHTSA communication ID: 11028722
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018 – 2024 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software.
Campaign / software reference: T-SB-0001-26
Source components: ELECTRICAL SYSTEM.
Source record 11028722 at NHTSANHTSA communication ID: 11028712
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2005 – 2026 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
Campaign / software reference: T-SB-0055-24 Rev2
Source components: UNKNOWN OR OTHER.
Source record 11028712 at NHTSANHTSA communication ID: 11028711
NHTSA source summary · Original PDF not reviewed by Recallfolio
Although the HV Floor Under Wire Harness and Rear Traction Motor Cable is covered by Toyota’s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers’ ownership experience. Toyota is providing extended coverage under this Customer Support Program for repairs related to excessive corrosion to the wire harness connections at the Rear Motor Generator. Excessive corrosion can cause AM Radio Static during certain drive cycles, or the vehicle may not start.
Campaign / software reference: 22TE09
Source components: ELECTRICAL SYSTEM.
Source record 11028711 at NHTSANHTSA communication ID: 11027555
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may experience a condition in which the 2021-2025 Sienna HV 2nd row FRAME SUB-ASSY, No.1 does not function even when the stow lever is pulled. Because the cable has come off from the bracket that holds it inside.
Campaign / software reference: T-TT-0795-25
Source components: STRUCTURE:BODY.
Source record 11027555 at NHTSANHTSA communication ID: 11026304
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021 – 2025 model year Sienna Hybrid vehicles may exhibit a sloshing or splashing noise from inside one or more door panels when driving, opening and/or closing a door, and/or braking. This condition may be caused by cavity wax, debris, or other materials that may block door drain holes and restrict water from draining properly.
Campaign / software reference: T-SB-0082-25
Source components: STRUCTURE:BODY.
Source record 11026304 at NHTSANHTSA communication ID: 11024081
NHTSA source summary · Original PDF not reviewed by Recallfolio
TECHNICAL INSTRUCTIONS FOR CUSTOMER SUPPORT PROGRAM 22TE09 HV FLOOR UNDER WIRE HARNESS AND REAR TRACTION MOTOR CABLE CORROSION CERTAIN 2021 – 2024 MODEL YEAR SIENNA HYBRID
Campaign / software reference: 22TE09
Source components: ELECTRICAL SYSTEM.
Source record 11024081 at NHTSANHTSA communication ID: 11024080
NHTSA source summary · Original PDF not reviewed by Recallfolio
Although the HV Floor Under Wire Harness and Rear Traction Motor Cable is covered by Toyota’s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers’ ownership experience. Toyota is providing extended coverage under this Customer Support Program for repairs related to excessive corrosion to the wire harness connections at the Rear Motor Generator. Excessive corrosion can cause AM Radio Static during certain drive cycles, or the vehicle may not start.
Campaign / software reference: 22TE09
Source components: ELECTRICAL SYSTEM.
Source record 11024080 at NHTSANHTSA communication ID: 11020657
NHTSA source summary · Original PDF not reviewed by Recallfolio
The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks.
Campaign / software reference: T-SB-0058-23 Rev1
Source components: ELECTRICAL SYSTEM.
Source record 11020657 at NHTSANHTSA communication ID: 11019357
NHTSA source summary · Original PDF not reviewed by Recallfolio
Frequently Asked Questions SPECIAL SERVICE CAMPAIGN 25TC03 Certain 2023 Model Year Corolla Cross Certain 2023 Model Year Corolla Cross HV Certain 2023 Model Year bZ4x Certain 2021-2023 Model Year Sienna HV TSS 3.0 Forward Recognition Camera Software Update
Campaign / software reference: 25TC03
Source components: FORWARD COLLISION AVOIDANCE: WARNINGS.
Source record 11019357 at NHTSANHTSA communication ID: 11019356
NHTSA source summary · Original PDF not reviewed by Recallfolio
Included vehicles are equipped with Toyota Safety Sense (TSS) 3.0, which includes the Pre-Collision System (PCS), which uses the forward recognition camera. In rare cases, a software programming issue can damage the forward recognition camera. This will result in the Pre-Collision System not working the next time the car is started.
Campaign / software reference: 25TC03
Source components: FORWARD COLLISION AVOIDANCE: WARNINGS.
Source record 11019356 at NHTSANHTSA communication ID: 11018354
NHTSA source summary · Original PDF not reviewed by Recallfolio
Frequently Asked Questions SPECIAL SERVICE CAMPAIGN 25TC03 Certain 2023 Model Year Corolla Cross Certain 2023 Model Year Corolla Cross HV Certain 2023 Model Year bZ4x Certain 2021-2023 Model Year Sienna HV TSS 3.0 Forward Recognition Camera Software Update
Campaign / software reference: 25TC03
Source components: FORWARD COLLISION AVOIDANCE: WARNINGS.
Source record 11018354 at NHTSANHTSA communication ID: 11018353
NHTSA source summary · Original PDF not reviewed by Recallfolio
Included vehicles are equipped with Toyota Safety Sense (TSS) 3.0, which includes the Pre-Collision System (PCS), which uses the forward recognition camera. In rare cases, a software programming issue can damage the forward recognition camera. This will result in the Pre-Collision System not working the next time the car is started.
Campaign / software reference: 25TC03
Source components: FORWARD COLLISION AVOIDANCE: WARNINGS.
Source record 11018353 at NHTSANHTSA communication ID: 11019349
NHTSA source summary · Original PDF not reviewed by Recallfolio
TECHNICAL INSTRUCTIONS FOR 25TC03 REPROGRAMMING FOR FORWARD RECOGNITION CAMERA CERTAIN 2023 COROLLA CROSS 2023 COROLLA CROSS HV 2023 BZ4X
Campaign / software reference: 25TC03
Source components: FORWARD COLLISION AVOIDANCE: WARNINGS.
Source record 11019349 at NHTSANHTSA communication ID: 11019348
NHTSA source summary · Original PDF not reviewed by Recallfolio
Frequently Asked Questions SPECIAL SERVICE CAMPAIGN 25TC03 Certain 2023 Model Year Corolla Cross Certain 2023 Model Year Corolla Cross HV Certain 2023 Model Year bZ4x Certain 2021-2023 Model Year Sienna HV TSS 3.0 Forward Recognition Camera Software Update
Campaign / software reference: 25TC03
Source components: FORWARD COLLISION AVOIDANCE: WARNINGS.
Source record 11019348 at NHTSANHTSA communication ID: 11019347
NHTSA source summary · Original PDF not reviewed by Recallfolio
Included vehicles are equipped with Toyota Safety Sense (TSS) 3.0, which includes the Pre-Collision System (PCS), which uses the forward recognition camera. In rare cases, a software programming issue can damage the forward recognition camera. This will result in the Pre-Collision System not working the next time the car is started.
Campaign / software reference: 25TC03
Source components: FORWARD COLLISION AVOIDANCE: WARNINGS.
Source record 11019347 at NHTSANHTSA communication ID: 11018346
NHTSA source summary · Original PDF not reviewed by Recallfolio
TECHNICAL INSTRUCTIONS FOR 25TC03 REPROGRAMMING FOR FORWARD RECOGNITION CAMERA CERTAIN 2023 COROLLA CROSS 2023 COROLLA CROSS HV 2023 BZ4X
Campaign / software reference: 25TC03
Source components: FORWARD COLLISION AVOIDANCE: WARNINGS.
Source record 11018346 at NHTSANHTSA communication ID: 11018345
NHTSA source summary · Original PDF not reviewed by Recallfolio
Frequently Asked Questions SPECIAL SERVICE CAMPAIGN 25TC03 Certain 2023 Model Year Corolla Cross Certain 2023 Model Year Corolla Cross HV Certain 2023 Model Year bZ4x Certain 2021-2023 Model Year Sienna HV TSS 3.0 Forward Recognition Camera Software Update
Campaign / software reference: 25TC03
Source components: FORWARD COLLISION AVOIDANCE: WARNINGS.
Source record 11018345 at NHTSANHTSA communication ID: 11018344
NHTSA source summary · Original PDF not reviewed by Recallfolio
Included vehicles are equipped with Toyota Safety Sense (TSS) 3.0, which includes the Pre-Collision System (PCS), which uses the forward recognition camera. In rare cases, a software programming issue can damage the forward recognition camera. This will result in the Pre-Collision System not working the next time the car is started.
Campaign / software reference: 25TC03
Source components: FORWARD COLLISION AVOIDANCE: WARNINGS.
Source record 11018344 at NHTSANHTSA communication ID: 11019332
NHTSA source summary · Original PDF not reviewed by Recallfolio
To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.
Campaign / software reference: T-TT-0780-25
Source components: ELECTRICAL SYSTEM.
Source record 11019332 at NHTSANHTSA communication ID: 11018329
NHTSA source summary · Original PDF not reviewed by Recallfolio
To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.
Campaign / software reference: T-TT-0780-25
Source components: ELECTRICAL SYSTEM.
Source record 11018329 at NHTSANHTSA communication ID: 11015882
NHTSA source summary · Original PDF not reviewed by Recallfolio
OBSOLETE NOTICE February 11, 2025: This bulletin is now obsolete. Please see T-SB-0021-25.
Campaign / software reference: T-SB-0107-20 Rev2
Source components: ENGINE.
Source record 11015882 at NHTSANHTSA communication ID: 11016786
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018 – 2024 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations.
Campaign / software reference: T-SB-0106-22 Rev2
Source components: ELECTRICAL SYSTEM.
Source record 11016786 at NHTSANHTSA communication ID: 11015500
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018 – 2024 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations.
Campaign / software reference: T-SB-0106-22 Rev2
Source components: ELECTRICAL SYSTEM.
Source record 11015500 at NHTSANHTSA communication ID: 11016782
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+) ECU flash reprogramming procedures and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard+ (CUW+). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the GTS+ ECU flash reprogramming process.
Campaign / software reference: T-SB-0021-25
Source components: ENGINE.
Source record 11016782 at NHTSANHTSA communication ID: 11016781
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.
Campaign / software reference: T-SB-0013-24 Rev1
Source components: ELECTRICAL SYSTEM.
Source record 11016781 at NHTSANHTSA communication ID: 11015496
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+) ECU flash reprogramming procedures and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard+ (CUW+). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the GTS+ ECU flash reprogramming process.
Campaign / software reference: T-SB-0021-25
Source components: ENGINE.
Source record 11015496 at NHTSANHTSA communication ID: 11015495
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.
Campaign / software reference: T-SB-0013-24 Rev1
Source components: ELECTRICAL SYSTEM.
Source record 11015495 at NHTSANHTSA communication ID: 11014205
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2025 MY Highlander HV, Sienna HV, RAV4, and RAV4 HV, may exhibit an oil leak from the area where the camshaft cover, camshaft housing, and the timing chain covers meet. This is typically seen on the exhaust side of the engine.
Campaign / software reference: T-TT-0771-25
Source components: ENGINE.
Source record 11014205 at NHTSANHTSA communication ID: 11014193
NHTSA source summary · Original PDF not reviewed by Recallfolio
OBSOLETE NOTICE January 23, 2025: This bulletin is now obsolete. Please see T-SB-0011-25.
Campaign / software reference: T-SB-0111-20 Rev2
Source components: ELECTRICAL SYSTEM.
Source record 11014193 at NHTSANHTSA communication ID: 11014190
NHTSA source summary · Original PDF not reviewed by Recallfolio
When certain vehicle ECUs are replaced, the ECU Security Key must be written in order for that ECU to communicate on the vehicle network. The GTS+ Software Health Check Results screen has been enhanced to help identify if a replacement ECU requires an ECU Security Key.
Campaign / software reference: T-SB-0011-25
Source components: ELECTRICAL SYSTEM.
Source record 11014190 at NHTSANHTSA communication ID: 11014177
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021 – 2024 model year Sienna Hybrid vehicles may exhibit a condition in which the front passenger carpet is untucked and torn at the center console, as shown in Figure 1. To address this concern, a carpet patch has been developed to reduce the likelihood of this condition from occurring.
Campaign / software reference: T-SB-0001-25
Source components: STRUCTURE:BODY.
Source record 11014177 at NHTSANHTSA communication ID: 10248823
NHTSA source summary · Original PDF not reviewed by Recallfolio
TI: TECHNICAL INSTRUCTIONS FOR 23TJ01 Second Key Delivery Program Multiple Models and Model Years
Source components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER.
Source record 10248823 at NHTSANHTSA communication ID: 10248822
NHTSA source summary · Original PDF not reviewed by Recallfolio
RL: The supply of Smart Keys available for Toyota vehicles has been temporarily limited to one (1) on select models since October 2022 due to global semiconductor shortages impacting certain microchips. Affected vehicles have been delivered with only one Smart Key and a second mechanical key.
Source components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER.
Source record 10248822 at NHTSANHTSA communication ID: 10248821
NHTSA source summary · Original PDF not reviewed by Recallfolio
DP: The subject vehicles were delivered with only one (1) Smart Key on select models since October 2022 due to a global semiconductor shortage impacting certain microchips. The affected vehicles were delivered with one (1) Smart Key and a second mechanical key.
Source components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER.
Source record 10248821 at NHTSANHTSA communication ID: 11012753
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin includes basic procedures for performing a rescue charge at battery on high voltage (HV) Ni-MH and Li-ion batteries. This bulletin should be used in conjunction with the applicable model and model year Repair Manual while performing the battery rescue charge. The GRX-5100 should be used wherever the Repair Manual references the Toyota Hybrid System (THS) charger.
Campaign / software reference: T-SB-0110-20 Rev2
Source components: ENGINE.
Source record 11012753 at NHTSANHTSA communication ID: 11012744
NHTSA source summary · Original PDF not reviewed by Recallfolio
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
Campaign / software reference: T-SB-0039-24 Rev2
Source components: STRUCTURE:BODY.
Source record 11012744 at NHTSANHTSA communication ID: 11012743
NHTSA source summary · Original PDF not reviewed by Recallfolio
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
Campaign / software reference: T-SB-0038-24 Rev2
Source components: STRUCTURE:BODY.
Source record 11012743 at NHTSANHTSA communication ID: 11012742
NHTSA source summary · Original PDF not reviewed by Recallfolio
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Campaign / software reference: T-SB-0035-24 Rev2
Source components: STRUCTURE:BODY.
Source record 11012742 at NHTSANHTSA communication ID: 11012735
NHTSA source summary · Original PDF not reviewed by Recallfolio
Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application.
Campaign / software reference: T-SB-0061-23 Rev2
Source components: STRUCTURE:BODY.
Source record 11012735 at NHTSANHTSA communication ID: 11012727
NHTSA source summary · Original PDF not reviewed by Recallfolio
Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
Campaign / software reference: T-SB-0062-23 Rev2
Source components: STRUCTURE:BODY.
Source record 11012727 at NHTSANHTSA communication ID: 11010361
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table below describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010361 at NHTSANHTSA communication ID: 11010360
NHTSA source summary · Original PDF not reviewed by Recallfolio
SECOND KEY DELIVERY PROGRAM 23TJ01 Multiple Models and Model Years Second Key Delivery Program Frequently Asked Questions
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010360 at NHTSANHTSA communication ID: 11010359
NHTSA source summary · Original PDF not reviewed by Recallfolio
The supply of Smart Keys available for Toyota vehicles has been temporarily limited to one (1) on select models since October 2022 due to global semiconductor shortages impacting certain microchips. Affected vehicles have been delivered with only one Smart Key and a second mechanical key.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010359 at NHTSANHTSA communication ID: 11010358
NHTSA source summary · Original PDF not reviewed by Recallfolio
The subject vehicles were delivered with only one (1) Smart Key on select models since October 2022 due to a global semiconductor shortage impacting certain microchips. The affected vehicles were delivered with one (1) Smart Key and a second mechanical key.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010358 at NHTSANHTSA communication ID: 11010105
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table below describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010105 at NHTSANHTSA communication ID: 11010104
NHTSA source summary · Original PDF not reviewed by Recallfolio
SECOND KEY DELIVERY PROGRAM Frequently Asked Questions
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010104 at NHTSANHTSA communication ID: 11010103
NHTSA source summary · Original PDF not reviewed by Recallfolio
The subject vehicles were delivered with only one (1) Smart Key on select models since October 2022 due to a global semiconductor shortage impacting certain microchips. The affected vehicles were delivered with one (1) Smart Key and a second mechanical key.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010103 at NHTSANHTSA communication ID: 11010068
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010068 at NHTSANHTSA communication ID: 11010067
NHTSA source summary · Original PDF not reviewed by Recallfolio
The subject vehicles were delivered with only one (1) Smart Key on select models since October 2022 due to a global semiconductor shortage impacting certain microchips. The affected vehicles were delivered with one (1) Smart Key and a second mechanical key.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010067 at NHTSANHTSA communication ID: 11010059
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers have expressed concern that the wireless functions of their Key Fob stop working. Key Fob LEDs will not turn ON, but engine starts with key held up against start button. Key battery voltage is confirmed OK and no DTC/RoB is found. This condition may occur if customer places Key Fob near wireless charger while phone is charging. When the key battery is removed and reinstalled, the Key Fob begins to operate normally.
Campaign / software reference: T-TT-0751-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11010059 at NHTSANHTSA communication ID: 11007455
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
Campaign / software reference: T-SB-0055-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11007455 at NHTSANHTSA communication ID: 11006161
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
Campaign / software reference: T-SB-0055-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11006161 at NHTSANHTSA communication ID: 11007445
NHTSA source summary · Original PDF not reviewed by Recallfolio
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
Campaign / software reference: T-SB-0039-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11007445 at NHTSANHTSA communication ID: 11007444
NHTSA source summary · Original PDF not reviewed by Recallfolio
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
Campaign / software reference: T-SB-0038-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11007444 at NHTSANHTSA communication ID: 11007443
NHTSA source summary · Original PDF not reviewed by Recallfolio
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Campaign / software reference: T-SB-0035-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11007443 at NHTSANHTSA communication ID: 11006151
NHTSA source summary · Original PDF not reviewed by Recallfolio
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
Campaign / software reference: T-SB-0039-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11006151 at NHTSANHTSA communication ID: 11006150
NHTSA source summary · Original PDF not reviewed by Recallfolio
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
Campaign / software reference: T-SB-0038-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11006150 at NHTSANHTSA communication ID: 11006149
NHTSA source summary · Original PDF not reviewed by Recallfolio
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Campaign / software reference: T-SB-0035-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11006149 at NHTSANHTSA communication ID: 11005122
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
Campaign / software reference: T-SB-0055-24
Source components: STRUCTURE:BODY.
Source record 11005122 at NHTSANHTSA communication ID: 11005064
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
Campaign / software reference: T-SB-0055-24
Source components: STRUCTURE:BODY.
Source record 11005064 at NHTSANHTSA communication ID: 11005119
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 – 2025 model year Toyota vehicles.
Campaign / software reference: T-SB-0103-20 Rev1
Source components: ENGINE.
Source record 11005119 at NHTSANHTSA communication ID: 11005061
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 – 2025 model year Toyota vehicles.
Campaign / software reference: T-SB-0103-20 Rev1
Source components: ENGINE.
Source record 11005061 at NHTSANHTSA communication ID: 11005098
NHTSA source summary · Original PDF not reviewed by Recallfolio
Second Key Delivery Program Frequently Asked Questions
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005098 at NHTSANHTSA communication ID: 11005097
NHTSA source summary · Original PDF not reviewed by Recallfolio
The supply of Smart Keys available for Toyota vehicles has been temporarily limited to one (1) on select models since October 2022 due to global semiconductor shortages impacting certain microchips. Affected vehicles have been delivered with only one Smart Key and a second mechanical key.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005097 at NHTSANHTSA communication ID: 11005094
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005094 at NHTSANHTSA communication ID: 11005040
NHTSA source summary · Original PDF not reviewed by Recallfolio
Second Key Delivery Program Frequently Asked Questions
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005040 at NHTSANHTSA communication ID: 11005039
NHTSA source summary · Original PDF not reviewed by Recallfolio
The supply of Smart Keys available for Toyota vehicles has been temporarily limited to one (1) on select models since October 2022 due to global semiconductor shortages impacting certain microchips. Affected vehicles have been delivered with only one Smart Key and a second mechanical key.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005039 at NHTSANHTSA communication ID: 11005036
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005036 at NHTSANHTSA communication ID: 11005084
NHTSA source summary · Original PDF not reviewed by Recallfolio
After jump-starting, the vehicle may experience a no-start condition and multiple DTCs including U010087. Upon investigation, it is found that the engine ECU has been damaged and needs to be replaced. In several cases, it was found that the cause of the ECU damage was improper jump starting. Further investigation found that ECU damage may occur if the negative (ground) cable clamps are attached on or around the engine ECU or ECU mounting bracket.
Campaign / software reference: T-TT-0694-22 Rev2
Source components: ENGINE.
Source record 11005084 at NHTSANHTSA communication ID: 11005083
NHTSA source summary · Original PDF not reviewed by Recallfolio
Second Key Delivery Program
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005083 at NHTSANHTSA communication ID: 11005082
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005082 at NHTSANHTSA communication ID: 11005026
NHTSA source summary · Original PDF not reviewed by Recallfolio
After jump-starting, the vehicle may experience a no-start condition and multiple DTCs including U010087. Upon investigation, it is found that the engine ECU has been damaged and needs to be replaced. In several cases, it was found that the cause of the ECU damage was improper jump starting. Further investigation found that ECU damage may occur if the negative (ground) cable clamps are attached on or around the engine ECU or ECU mounting bracket.
Campaign / software reference: T-TT-0694-22 Rev2
Source components: ENGINE.
Source record 11005026 at NHTSANHTSA communication ID: 11005025
NHTSA source summary · Original PDF not reviewed by Recallfolio
Second Key Delivery Program
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005025 at NHTSANHTSA communication ID: 11005024
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005024 at NHTSANHTSA communication ID: 11005181
NHTSA source summary · Original PDF not reviewed by Recallfolio
Second Key Delivery Program Frequently Asked Questions
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005181 at NHTSANHTSA communication ID: 11005180
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005180 at NHTSANHTSA communication ID: 11005153
NHTSA source summary · Original PDF not reviewed by Recallfolio
Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
Campaign / software reference: T-SB-0061-23 Rev1
Source components: STRUCTURE:BODY.
Source record 11005153 at NHTSANHTSA communication ID: 11005150
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021 – 2024 model year Sienna Hybrid vehicles equipped with a Blind Spot Monitor may exhibit a MIL ON condition with Diagnostic Trouble Code (DTC) C1AC200 (Rear Side Radar Sensor Beam Axis Misalignment) present and Blind Spot Monitor inoperative system warnings displayed.
Campaign / software reference: T-SB-0048-24
Source components: ELECTRICAL SYSTEM.
Source record 11005150 at NHTSANHTSA communication ID: 11005149
NHTSA source summary · Original PDF not reviewed by Recallfolio
Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
Campaign / software reference: T-SB-0062-23 Rev1
Source components: STRUCTURE:BODY.
Source record 11005149 at NHTSANHTSA communication ID: 11005148
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some drivers of 2021 – 2024 model year Sienna Hybrid vehicles may be sensitive to the momentary transition from regenerative braking to hydraulic braking under certain driving conditions, such as while driving downhill, or turning with light brake pedal application. The brake actuator control module can be updated to improve brake feeling for this condition.
Campaign / software reference: T-SB-0047-24
Source components: SERVICE BRAKES.
Source record 11005148 at NHTSANHTSA communication ID: 11003649
NHTSA source summary · Original PDF not reviewed by Recallfolio
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
Campaign / software reference: T-SB-0039-24
Source components: STRUCTURE:BODY.
Source record 11003649 at NHTSANHTSA communication ID: 11003647
NHTSA source summary · Original PDF not reviewed by Recallfolio
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. •The entire bulletin has been updated.
Campaign / software reference: T-SB-0038-24
Source components: STRUCTURE:BODY.
Source record 11003647 at NHTSANHTSA communication ID: 11003644
NHTSA source summary · Original PDF not reviewed by Recallfolio
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Campaign / software reference: T-SB-0035-24
Source components: STRUCTURE:BODY.
Source record 11003644 at NHTSANHTSA communication ID: 11003594
NHTSA source summary · Original PDF not reviewed by Recallfolio
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
Campaign / software reference: T-SB-0039-24
Source components: STRUCTURE:BODY.
Source record 11003594 at NHTSANHTSA communication ID: 11003592
NHTSA source summary · Original PDF not reviewed by Recallfolio
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. •The entire bulletin has been updated.
Campaign / software reference: T-SB-0038-24
Source components: STRUCTURE:BODY.
Source record 11003592 at NHTSANHTSA communication ID: 11003589
NHTSA source summary · Original PDF not reviewed by Recallfolio
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Campaign / software reference: T-SB-0035-24
Source components: STRUCTURE:BODY.
Source record 11003589 at NHTSANHTSA communication ID: 11003628
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11003628 at NHTSANHTSA communication ID: 11003573
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11003573 at NHTSANHTSA communication ID: 11003621
NHTSA source summary · Original PDF not reviewed by Recallfolio
When certain vehicle ECUs are replaced, the ECU Security Key must be written in order for that ECU to communicate on the vehicle network. The GTS+ Software Health Check Results screen has been enhanced to help identify if a replacement ECU requires an ECU Security Key. REVISION NOTICE April 11, 2024 Rev2: •Applicability has been updated to include 2023 – 2024 model year 86, Corolla, Corolla Cross, Corolla Cross Hybrid, Crown, GR Corolla, Mirai, Prius, Prius Prime, RAV4 Prime, Sequoia Hybrid, Sienna Hybrid, Tundra, Tundra Hybrid, Venza Hybrid, and Yaris and 2024 model year bZ4X, Highlander, Highlander Hybrid, Grand Highlander, and Grand Highlander Hybrid vehicles. •The entire bulletin has been updated to represent GTS+ Software. July 08, 2022 Rev1: •Applicability has been updated to include 2022 model year 86, Corolla Cross, Mirai, Tundra, and Tundra Hybrid vehicles and 2023 model year bZ4X vehicles. Any previous printed versions of this bulletin should be discarded.
Campaign / software reference: T-SB-0111-20
Source components: ELECTRICAL SYSTEM.
Source record 11003621 at NHTSANHTSA communication ID: 11003619
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.
Campaign / software reference: T-TT-0754-24
Source components: ELECTRICAL SYSTEM.
Source record 11003619 at NHTSANHTSA communication ID: 11003566
NHTSA source summary · Original PDF not reviewed by Recallfolio
When certain vehicle ECUs are replaced, the ECU Security Key must be written in order for that ECU to communicate on the vehicle network. The GTS+ Software Health Check Results screen has been enhanced to help identify if a replacement ECU requires an ECU Security Key. REVISION NOTICE April 11, 2024 Rev2: •Applicability has been updated to include 2023 – 2024 model year 86, Corolla, Corolla Cross, Corolla Cross Hybrid, Crown, GR Corolla, Mirai, Prius, Prius Prime, RAV4 Prime, Sequoia Hybrid, Sienna Hybrid, Tundra, Tundra Hybrid, Venza Hybrid, and Yaris and 2024 model year bZ4X, Highlander, Highlander Hybrid, Grand Highlander, and Grand Highlander Hybrid vehicles. •The entire bulletin has been updated to represent GTS+ Software. July 08, 2022 Rev1: •Applicability has been updated to include 2022 model year 86, Corolla Cross, Mirai, Tundra, and Tundra Hybrid vehicles and 2023 model year bZ4X vehicles. Any previous printed versions of this bulletin should be discarded.
Campaign / software reference: T-SB-0111-20
Source components: ELECTRICAL SYSTEM.
Source record 11003566 at NHTSANHTSA communication ID: 11003564
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.
Campaign / software reference: T-TT-0754-24
Source components: ELECTRICAL SYSTEM.
Source record 11003564 at NHTSANHTSA communication ID: 11003607
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers have complained that the wireless functions of their Key Fob stop working. Key Fob LEDs will not turn ON, but engine starts with key held up against start button. Key battery voltage is confirmed OK and no DTC/RoB is found. This condition may occur if customer places Key Fob near wireless charger while phone is charging. When the key battery is removed and reinstalled, the Key Fob begins to operate normally.
Campaign / software reference: T-TT-0751-24
Source components: ELECTRICAL SYSTEM.
Source record 11003607 at NHTSANHTSA communication ID: 11003552
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers have complained that the wireless functions of their Key Fob stop working. Key Fob LEDs will not turn ON, but engine starts with key held up against start button. Key battery voltage is confirmed OK and no DTC/RoB is found. This condition may occur if customer places Key Fob near wireless charger while phone is charging. When the key battery is removed and reinstalled, the Key Fob begins to operate normally.
Campaign / software reference: T-TT-0751-24
Source components: ELECTRICAL SYSTEM.
Source record 11003552 at NHTSANHTSA communication ID: 10253225
NHTSA source summary · Original PDF not reviewed by Recallfolio
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.
Source components: ELECTRICAL SYSTEM.
Source record 10253225 at NHTSA