The manufacturer’s record · Page 1 of 2
Original record summaries, dates and identifiers for this model-year. Records 1–100 of 130, ordered newest first. Dated records on this page: Nov 15, 2023–Jun 25, 2026.
Back to 2023 Toyota HIGHLANDER problems & recallsThis archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
NHTSA communication ID: 11034823
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 – 2026 model year Highlander and Highlander Hybrid vehicles may exhibit a water leak from the roof rack attachment clips. This may be caused by the sealant in the roof channel obstructing the proper seating position for the clip gasket.
Campaign / software reference: T-SB-0040-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11034823 at NHTSANHTSA communication ID: 11031158
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 – 2024 model year Highlander and Highlander Hybrid vehicles may exhibit a condition in which the air conditioner does not cool due to a leak and/or corrosion in the rear underbody air conditioner tube and accessory assembly. The anti-corrosion material has been updated to reduce the possibility of this condition.
Campaign / software reference: T-SB-0021-26
Source components: ELECTRICAL SYSTEM.
Source record 11031158 at NHTSANHTSA communication ID: 11028712
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2005 – 2026 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
Campaign / software reference: T-SB-0055-24 Rev2
Source components: UNKNOWN OR OTHER.
Source record 11028712 at NHTSANHTSA communication ID: 11026318
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 – 2023 model year Highlander and Highlander Hybrid vehicles may exhibit a condition in which the Power Back Door (PBD) will not open or close and/or stops moving while opening or closing. A modified PBD unit assembly is available to address these conditions.
Campaign / software reference: T-SB-0086-25
Source components: STRUCTURE:BODY.
Source record 11026318 at NHTSANHTSA communication ID: 11026306
NHTSA source summary · Original PDF not reviewed by Recallfolio
A new head unit software update is available for 2022 – 2025 model year Tundra, and Tundra Hybrid; 2023 – 2025 model year Corolla Cross, Corolla Cross Hybrid, Highlander, Highlander Hybrid, Mirai, and Sequoia Hybrid vehicles equipped with Toyota Multimedia versions earlier than version 2230.
Campaign / software reference: T-SB-0083-25
Source components: ELECTRICAL SYSTEM.
Source record 11026306 at NHTSANHTSA communication ID: 11024080
NHTSA source summary · Original PDF not reviewed by Recallfolio
Although the HV Floor Under Wire Harness and Rear Traction Motor Cable is covered by Toyota’s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers’ ownership experience. Toyota is providing extended coverage under this Customer Support Program for repairs related to excessive corrosion to the wire harness connections at the Rear Motor Generator. Excessive corrosion can cause AM Radio Static during certain drive cycles, or the vehicle may not start.
Campaign / software reference: 22TE09
Source components: ELECTRICAL SYSTEM.
Source record 11024080 at NHTSANHTSA communication ID: 11024075
NHTSA source summary · Original PDF not reviewed by Recallfolio
A new head unit software update is available for 2023 model year Corolla Cross, Corolla Cross Hybrid, Highlander, Highlander Hybrid, and Mirai vehicles equipped with Toyota Multimedia (earlier than version 2170). This software update includes the following improvements: •User Profile. •User interface. •Cloud navigation. •Intelligent assistant voice recognition. •Bug fixes.
Campaign / software reference: T-SB-0015-24 Rev2
Source components: ELECTRICAL SYSTEM.
Source record 11024075 at NHTSANHTSA communication ID: 11020657
NHTSA source summary · Original PDF not reviewed by Recallfolio
The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks.
Campaign / software reference: T-SB-0058-23 Rev1
Source components: ELECTRICAL SYSTEM.
Source record 11020657 at NHTSANHTSA communication ID: 11019331
NHTSA source summary · Original PDF not reviewed by Recallfolio
To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.
Campaign / software reference: T-TT-0779-25
Source components: ELECTRICAL SYSTEM.
Source record 11019331 at NHTSANHTSA communication ID: 11018328
NHTSA source summary · Original PDF not reviewed by Recallfolio
To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.
Campaign / software reference: T-TT-0779-25
Source components: ELECTRICAL SYSTEM.
Source record 11018328 at NHTSANHTSA communication ID: 11016781
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.
Campaign / software reference: T-SB-0013-24 Rev1
Source components: ELECTRICAL SYSTEM.
Source record 11016781 at NHTSANHTSA communication ID: 11015495
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.
Campaign / software reference: T-SB-0013-24 Rev1
Source components: ELECTRICAL SYSTEM.
Source record 11015495 at NHTSANHTSA communication ID: 10249327
NHTSA source summary · Original PDF not reviewed by Recallfolio
TT: Engine Oil Leak between the Lower Oil Pan and Crank Case
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV) · UNKNOWN OR OTHER.
Source record 10249327 at NHTSANHTSA communication ID: 11012759
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 – 2024 model year Tundra and 2023 model year Highlander vehicles may exhibit a MIL ON condition with Diagnostic Trouble Codes (DTCs) P162B87 (Lost Communication with Battery Monitor Module Missing Message) and/or P15AD87 (Active Grille Air Shutter "A" Missing) present. The battery state sensor assembly has been updated to prevent the condition from occurring.
Campaign / software reference: T-SB-0050-24 Rev2
Source components: ELECTRICAL SYSTEM.
Source record 11012759 at NHTSANHTSA communication ID: 11012744
NHTSA source summary · Original PDF not reviewed by Recallfolio
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
Campaign / software reference: T-SB-0039-24 Rev2
Source components: STRUCTURE:BODY.
Source record 11012744 at NHTSANHTSA communication ID: 11012743
NHTSA source summary · Original PDF not reviewed by Recallfolio
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
Campaign / software reference: T-SB-0038-24 Rev2
Source components: STRUCTURE:BODY.
Source record 11012743 at NHTSANHTSA communication ID: 11012742
NHTSA source summary · Original PDF not reviewed by Recallfolio
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Campaign / software reference: T-SB-0035-24 Rev2
Source components: STRUCTURE:BODY.
Source record 11012742 at NHTSANHTSA communication ID: 11012735
NHTSA source summary · Original PDF not reviewed by Recallfolio
Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application.
Campaign / software reference: T-SB-0061-23 Rev2
Source components: STRUCTURE:BODY.
Source record 11012735 at NHTSANHTSA communication ID: 11012727
NHTSA source summary · Original PDF not reviewed by Recallfolio
Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
Campaign / software reference: T-SB-0062-23 Rev2
Source components: STRUCTURE:BODY.
Source record 11012727 at NHTSANHTSA communication ID: 11010361
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table below describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010361 at NHTSANHTSA communication ID: 11010360
NHTSA source summary · Original PDF not reviewed by Recallfolio
SECOND KEY DELIVERY PROGRAM 23TJ01 Multiple Models and Model Years Second Key Delivery Program Frequently Asked Questions
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010360 at NHTSANHTSA communication ID: 11010359
NHTSA source summary · Original PDF not reviewed by Recallfolio
The supply of Smart Keys available for Toyota vehicles has been temporarily limited to one (1) on select models since October 2022 due to global semiconductor shortages impacting certain microchips. Affected vehicles have been delivered with only one Smart Key and a second mechanical key.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010359 at NHTSANHTSA communication ID: 11010358
NHTSA source summary · Original PDF not reviewed by Recallfolio
The subject vehicles were delivered with only one (1) Smart Key on select models since October 2022 due to a global semiconductor shortage impacting certain microchips. The affected vehicles were delivered with one (1) Smart Key and a second mechanical key.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010358 at NHTSANHTSA communication ID: 11010351
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 model year Avalon and Avalon Hybrid, 2022 – 2024 model year Camry, Camry Hybrid, Corolla, Corolla Hatchback, Corolla Hybrid, Highlander, Highlander Hybrid, Prius, Prius Prime, RAV4, RAV4 Hybrid, RAV4 Prime, and Venza Hybrid, 2023 – 2024 model year Crown, and 2024 model year Grand Highlander vehicles may exhibit a high-pitched noise coming from the front HVAC blower motor while operating the air conditioner or heater. This condition does not affect the operation of the vehicle, however, a heater cover has been developed to help reduce or potentially eliminate the noise.
Campaign / software reference: T-SB-0098-24
Source components: STRUCTURE:BODY.
Source record 11010351 at NHTSANHTSA communication ID: 11010336
NHTSA source summary · Original PDF not reviewed by Recallfolio
TECHNICAL INSTRUCTIONS FOR SPECIAL SERVICE CAMPAIGN 24TC05 MALFUNCTION INDICATOR LAMP (MIL) IS ON WITH DTC P05CE00 SOFTWARE UPDATE CERTAIN 2023 & 2024 HIGHLANDER VEHICLES CERTAIN 2024 GRAND HIGHLANDER VEHICLES
Campaign / software reference: 24TC05
Source components: ELECTRICAL SYSTEM.
Source record 11010336 at NHTSANHTSA communication ID: 11010334
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 – 2024 model year Tundra and 2023 model year Highlander vehicles may exhibit a MIL ON condition with Diagnostic Trouble Codes (DTCs) P162B87 (Lost Communication with Battery Monitor Module Missing Message) and/or P15AD87 (Active Grille Air Shutter "A" Missing) present. The battery state sensor assembly has been updated to prevent the condition from occurring.
Campaign / software reference: T-SB-0050-24 Rev1
Source components: ELECTRICAL SYSTEM.
Source record 11010334 at NHTSANHTSA communication ID: 11010326
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2023 model year RAV4 Prime vehicles with Data Communication Module (DCM) firmware version earlier than LG-N210hh1V1V-09 may exhibit a condition in which the remote climate system is inoperative after the vehicle has been off for three hours or more. Some 2023 model year Corolla, Corolla Cross, Corolla Cross Hybrid, Corolla Hatchback, Corolla Hybrid, Crown, GR Corolla, Highlander, Highlander Hybrid, Prius, Prius Prime, RAV4, RAV4 Hybrid, RAV4 Prime, and Venza Hybrid vehicles and 2024 model year Grand Highlander and Grand Highlander Hybrid vehicles with DCM firmware versions earlier than LG-N210jj3333-09, LG-N210nn1212-09, LG-N310kk4646-0I, LG-N310ll4A4A-0I, LG-N310mm8A8A-0I, LG-N310nnBLBM-0I, or LG-N310oo1B1B-0I may exhibit a condition in which remote services are inoperative. Some 2023 model year Corolla, Corolla Cross, Corolla Cross Hybrid, Highlander, and Highlander Hybrid vehicles, 2023 – 2024 model year Corolla Hybrid, GR Corolla, Prius, Prius Prime, RAV4, RAV4 Hybrid, RAV4 Prime, and Venza Hybrid vehicles, 2024 model year Grand Highlander, Grand Highlander Hybrid, and Land Cruiser vehicles; 2023 – 2025 Corolla Hatchback and Crown vehicles, and 2025 Crown Signia vehicles with DCM firmware versions earlier than LG-N210qq####-## or LG-N310qq####-## may exhibit a condition in which Apple Music® or Amazon Music streaming and/or remote services are inoperative. A DCM firmware update is now available.
Campaign / software reference: T-SB-0062-24 Rev1
Source components: ELECTRICAL SYSTEM.
Source record 11010326 at NHTSANHTSA communication ID: 11010105
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table below describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010105 at NHTSANHTSA communication ID: 11010104
NHTSA source summary · Original PDF not reviewed by Recallfolio
SECOND KEY DELIVERY PROGRAM Frequently Asked Questions
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010104 at NHTSANHTSA communication ID: 11010103
NHTSA source summary · Original PDF not reviewed by Recallfolio
The subject vehicles were delivered with only one (1) Smart Key on select models since October 2022 due to a global semiconductor shortage impacting certain microchips. The affected vehicles were delivered with one (1) Smart Key and a second mechanical key.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010103 at NHTSANHTSA communication ID: 11010087
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Engine Control Computer software has a programing error which can cause the exhaust variable valve timing (VVT) locking pin to temporarily get stuck. When this happens, an engine malfunction indicator lamp (MIL) can appear on the dashboard as well as diagnostic trouble code (DTC), P05CE00 to be set.
Campaign / software reference: 24TC05
Source components: ELECTRICAL SYSTEM · ENGINE.
Source record 11010087 at NHTSANHTSA communication ID: 11010086
NHTSA source summary · Original PDF not reviewed by Recallfolio
SPECIAL SERVICE CAMPAIGN 24TC05 Frequently Asked Questions
Campaign / software reference: 24TC05
Source components: ELECTRICAL SYSTEM · ENGINE.
Source record 11010086 at NHTSANHTSA communication ID: 11010076
NHTSA source summary · Original PDF not reviewed by Recallfolio
TECHNICAL INSTRUCTIONS FOR SPECIAL SERVICE CAMPAIGN 24TC05 MALFUNCTION INDICATOR LAMP (MIL) IS ON WITH DTC P05CE00 SOFTWARE UPDATE CERTAIN 2023 & 2024 HIGHLANDER VEHICLES CERTAIN 2024 GRAND HIGHLANDER VEHICLES
Campaign / software reference: 24TC05
Source components: ELECTRICAL SYSTEM · ENGINE.
Source record 11010076 at NHTSANHTSA communication ID: 11010075
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Engine Control Computer software has a programing error which can cause the exhaust variable valve timing (VVT) locking pin to temporarily get stuck. When this happens, an engine malfunction indicator lamp (MIL) can appear on the dashboard as well as diagnostic trouble code (DTC), P05CE00 to be set.
Campaign / software reference: 24TC05
Source components: ELECTRICAL SYSTEM · ENGINE.
Source record 11010075 at NHTSANHTSA communication ID: 11010074
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Engine Control Computer software has a programing error which can cause the exhaust variable valve timing (VVT) locking pin to temporarily get stuck. When this happens, an engine malfunction indicator lamp (MIL) can appear on the dashboard as well as diagnostic trouble code (DTC), P05CE00 to be set.
Campaign / software reference: 24TC05
Source components: ELECTRICAL SYSTEM · ENGINE.
Source record 11010074 at NHTSANHTSA communication ID: 11010073
NHTSA source summary · Original PDF not reviewed by Recallfolio
Frequently Asked Questions Original Publication Date: September 19, 2024
Campaign / software reference: 24TC05
Source components: ELECTRICAL SYSTEM · ENGINE.
Source record 11010073 at NHTSANHTSA communication ID: 11010068
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010068 at NHTSANHTSA communication ID: 11010067
NHTSA source summary · Original PDF not reviewed by Recallfolio
The subject vehicles were delivered with only one (1) Smart Key on select models since October 2022 due to a global semiconductor shortage impacting certain microchips. The affected vehicles were delivered with one (1) Smart Key and a second mechanical key.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010067 at NHTSANHTSA communication ID: 11010059
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers have expressed concern that the wireless functions of their Key Fob stop working. Key Fob LEDs will not turn ON, but engine starts with key held up against start button. Key battery voltage is confirmed OK and no DTC/RoB is found. This condition may occur if customer places Key Fob near wireless charger while phone is charging. When the key battery is removed and reinstalled, the Key Fob begins to operate normally.
Campaign / software reference: T-TT-0751-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11010059 at NHTSANHTSA communication ID: 11007455
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
Campaign / software reference: T-SB-0055-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11007455 at NHTSANHTSA communication ID: 11006161
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
Campaign / software reference: T-SB-0055-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11006161 at NHTSANHTSA communication ID: 11007454
NHTSA source summary · Original PDF not reviewed by Recallfolio
OBSOLETE NOTICE July 18, 2024: This bulletin is now obsolete. Please see T-SB-0062-24.
Campaign / software reference: T-SB-0027-24 Rev1
Source components: ELECTRICAL SYSTEM.
Source record 11007454 at NHTSANHTSA communication ID: 11007453
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2023 model year RAV4 Prime vehicles with Data Communication Module (DCM) firmware version earlier than LG-N210hh1V1V-09 may exhibit a condition in which the remote climate system is inoperative after the vehicle has been off for three hours or more. Some 2023 model year Corolla, Corolla Cross, Corolla Cross Hybrid, Corolla Hatchback, Corolla Hybrid, Crown, GR Corolla, Highlander, Highlander Hybrid, Prius, Prius Prime, RAV4, RAV4 Hybrid, RAV4 Prime, and Venza Hybrid vehicles and 2024 model year Grand Highlander, and Grand Highlander Hybrid vehicles with previous versions of DCM firmware (see Table 1 below) may exhibit a condition in which remote services are inoperative. A DCM firmware update is now available to address this condition.
Campaign / software reference: T-SB-0062-24
Source components: ELECTRICAL SYSTEM.
Source record 11007453 at NHTSANHTSA communication ID: 11006160
NHTSA source summary · Original PDF not reviewed by Recallfolio
OBSOLETE NOTICE July 18, 2024: This bulletin is now obsolete. Please see T-SB-0062-24.
Campaign / software reference: T-SB-0027-24 Rev1
Source components: ELECTRICAL SYSTEM.
Source record 11006160 at NHTSANHTSA communication ID: 11006159
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2023 model year RAV4 Prime vehicles with Data Communication Module (DCM) firmware version earlier than LG-N210hh1V1V-09 may exhibit a condition in which the remote climate system is inoperative after the vehicle has been off for three hours or more. Some 2023 model year Corolla, Corolla Cross, Corolla Cross Hybrid, Corolla Hatchback, Corolla Hybrid, Crown, GR Corolla, Highlander, Highlander Hybrid, Prius, Prius Prime, RAV4, RAV4 Hybrid, RAV4 Prime, and Venza Hybrid vehicles and 2024 model year Grand Highlander, and Grand Highlander Hybrid vehicles with previous versions of DCM firmware (see Table 1 below) may exhibit a condition in which remote services are inoperative. A DCM firmware update is now available to address this condition.
Campaign / software reference: T-SB-0062-24
Source components: ELECTRICAL SYSTEM.
Source record 11006159 at NHTSANHTSA communication ID: 11007445
NHTSA source summary · Original PDF not reviewed by Recallfolio
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
Campaign / software reference: T-SB-0039-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11007445 at NHTSANHTSA communication ID: 11007444
NHTSA source summary · Original PDF not reviewed by Recallfolio
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
Campaign / software reference: T-SB-0038-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11007444 at NHTSANHTSA communication ID: 11007443
NHTSA source summary · Original PDF not reviewed by Recallfolio
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Campaign / software reference: T-SB-0035-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11007443 at NHTSANHTSA communication ID: 11006151
NHTSA source summary · Original PDF not reviewed by Recallfolio
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
Campaign / software reference: T-SB-0039-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11006151 at NHTSANHTSA communication ID: 11006150
NHTSA source summary · Original PDF not reviewed by Recallfolio
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
Campaign / software reference: T-SB-0038-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11006150 at NHTSANHTSA communication ID: 11006149
NHTSA source summary · Original PDF not reviewed by Recallfolio
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Campaign / software reference: T-SB-0035-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11006149 at NHTSANHTSA communication ID: 11005122
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
Campaign / software reference: T-SB-0055-24
Source components: STRUCTURE:BODY.
Source record 11005122 at NHTSANHTSA communication ID: 11005064
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
Campaign / software reference: T-SB-0055-24
Source components: STRUCTURE:BODY.
Source record 11005064 at NHTSANHTSA communication ID: 11005119
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 – 2025 model year Toyota vehicles.
Campaign / software reference: T-SB-0103-20 Rev1
Source components: ENGINE.
Source record 11005119 at NHTSANHTSA communication ID: 11005061
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 – 2025 model year Toyota vehicles.
Campaign / software reference: T-SB-0103-20 Rev1
Source components: ENGINE.
Source record 11005061 at NHTSANHTSA communication ID: 11005098
NHTSA source summary · Original PDF not reviewed by Recallfolio
Second Key Delivery Program Frequently Asked Questions
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005098 at NHTSANHTSA communication ID: 11005097
NHTSA source summary · Original PDF not reviewed by Recallfolio
The supply of Smart Keys available for Toyota vehicles has been temporarily limited to one (1) on select models since October 2022 due to global semiconductor shortages impacting certain microchips. Affected vehicles have been delivered with only one Smart Key and a second mechanical key.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005097 at NHTSANHTSA communication ID: 11005094
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005094 at NHTSANHTSA communication ID: 11005040
NHTSA source summary · Original PDF not reviewed by Recallfolio
Second Key Delivery Program Frequently Asked Questions
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005040 at NHTSANHTSA communication ID: 11005039
NHTSA source summary · Original PDF not reviewed by Recallfolio
The supply of Smart Keys available for Toyota vehicles has been temporarily limited to one (1) on select models since October 2022 due to global semiconductor shortages impacting certain microchips. Affected vehicles have been delivered with only one Smart Key and a second mechanical key.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005039 at NHTSANHTSA communication ID: 11005036
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005036 at NHTSANHTSA communication ID: 11005107
NHTSA source summary · Original PDF not reviewed by Recallfolio
TECHNICAL INSTRUCTIONS FOR SPECIAL SERVICE CAMPAIGN 24TC03 DATA COMMUNICATON MODULE (DCM) UPDATE CERTAIN 2023 COROLLA, COROLLA CROSS, COROLLA HATCHBACK, COROLLA HV, GR COROLLA, CROWN, HIGHLANDER, HIGHLANDER HV, PRIUS, RAV4, RAV4 PRIME, RAV4 HV, VENZA HV
Campaign / software reference: 24TC03
Source components: ELECTRICAL SYSTEM.
Source record 11005107 at NHTSANHTSA communication ID: 11005103
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Data Communication Module (DCM), which supports Toyota Connected Services in your vehicle, may not have activated properly during vehicle delivery. This results in all connected services becoming inoperative, including Safety Connect features such as the SOS emergency calling feature.
Campaign / software reference: 24TC03
Source components: ELECTRICAL SYSTEM.
Source record 11005103 at NHTSANHTSA communication ID: 11005102
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Data Communication Module (DCM), which supports Toyota Connected Services in your vehicle, may not have activated properly during vehicle delivery. This results in all connected services becoming inoperative, including Safety Connect features such as the SOS emergency calling feature.
Campaign / software reference: 24TC03
Source components: ELECTRICAL SYSTEM.
Source record 11005102 at NHTSANHTSA communication ID: 11005049
NHTSA source summary · Original PDF not reviewed by Recallfolio
TECHNICAL INSTRUCTIONS FOR SPECIAL SERVICE CAMPAIGN 24TC03 DATA COMMUNICATON MODULE (DCM) UPDATE CERTAIN 2023 COROLLA, COROLLA CROSS, COROLLA HATCHBACK, COROLLA HV, GR COROLLA, CROWN, HIGHLANDER, HIGHLANDER HV, PRIUS, RAV4, RAV4 PRIME, RAV4 HV, VENZA HV
Campaign / software reference: 24TC03
Source components: ELECTRICAL SYSTEM.
Source record 11005049 at NHTSANHTSA communication ID: 11005045
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Data Communication Module (DCM), which supports Toyota Connected Services in your vehicle, may not have activated properly during vehicle delivery. This results in all connected services becoming inoperative, including Safety Connect features such as the SOS emergency calling feature.
Campaign / software reference: 24TC03
Source components: ELECTRICAL SYSTEM.
Source record 11005045 at NHTSANHTSA communication ID: 11005044
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Data Communication Module (DCM), which supports Toyota Connected Services in your vehicle, may not have activated properly during vehicle delivery. This results in all connected services becoming inoperative, including Safety Connect features such as the SOS emergency calling feature.
Campaign / software reference: 24TC03
Source components: ELECTRICAL SYSTEM.
Source record 11005044 at NHTSANHTSA communication ID: 11005083
NHTSA source summary · Original PDF not reviewed by Recallfolio
Second Key Delivery Program
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005083 at NHTSANHTSA communication ID: 11005082
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005082 at NHTSANHTSA communication ID: 11005025
NHTSA source summary · Original PDF not reviewed by Recallfolio
Second Key Delivery Program
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005025 at NHTSANHTSA communication ID: 11005024
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005024 at NHTSANHTSA communication ID: 11005181
NHTSA source summary · Original PDF not reviewed by Recallfolio
Second Key Delivery Program Frequently Asked Questions
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005181 at NHTSANHTSA communication ID: 11005180
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005180 at NHTSANHTSA communication ID: 11005153
NHTSA source summary · Original PDF not reviewed by Recallfolio
Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
Campaign / software reference: T-SB-0061-23 Rev1
Source components: STRUCTURE:BODY.
Source record 11005153 at NHTSANHTSA communication ID: 11005149
NHTSA source summary · Original PDF not reviewed by Recallfolio
Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
Campaign / software reference: T-SB-0062-23 Rev1
Source components: STRUCTURE:BODY.
Source record 11005149 at NHTSANHTSA communication ID: 11003651
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 2023 model year Highlander and Highlander Hybrid vehicles may exhibit a water leak from the roof rack attachment clips. This may be caused by the sealant in the roof channel obstructing the proper seating position for the clip gasket.
Campaign / software reference: T-SB-0040-24
Source components: STRUCTURE:BODY.
Source record 11003651 at NHTSANHTSA communication ID: 11003596
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020 2023 model year Highlander and Highlander Hybrid vehicles may exhibit a water leak from the roof rack attachment clips. This may be caused by the sealant in the roof channel obstructing the proper seating position for the clip gasket.
Campaign / software reference: T-SB-0040-24
Source components: STRUCTURE:BODY.
Source record 11003596 at NHTSANHTSA communication ID: 11003647
NHTSA source summary · Original PDF not reviewed by Recallfolio
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. •The entire bulletin has been updated.
Campaign / software reference: T-SB-0038-24
Source components: STRUCTURE:BODY.
Source record 11003647 at NHTSANHTSA communication ID: 11003644
NHTSA source summary · Original PDF not reviewed by Recallfolio
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Campaign / software reference: T-SB-0035-24
Source components: STRUCTURE:BODY.
Source record 11003644 at NHTSANHTSA communication ID: 11003592
NHTSA source summary · Original PDF not reviewed by Recallfolio
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. •The entire bulletin has been updated.
Campaign / software reference: T-SB-0038-24
Source components: STRUCTURE:BODY.
Source record 11003592 at NHTSANHTSA communication ID: 11003589
NHTSA source summary · Original PDF not reviewed by Recallfolio
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Campaign / software reference: T-SB-0035-24
Source components: STRUCTURE:BODY.
Source record 11003589 at NHTSANHTSA communication ID: 11003628
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11003628 at NHTSANHTSA communication ID: 11003573
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11003573 at NHTSANHTSA communication ID: 11003619
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.
Campaign / software reference: T-TT-0754-24
Source components: ELECTRICAL SYSTEM.
Source record 11003619 at NHTSANHTSA communication ID: 11003564
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.
Campaign / software reference: T-TT-0754-24
Source components: ELECTRICAL SYSTEM.
Source record 11003564 at NHTSANHTSA communication ID: 11003607
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers have complained that the wireless functions of their Key Fob stop working. Key Fob LEDs will not turn ON, but engine starts with key held up against start button. Key battery voltage is confirmed OK and no DTC/RoB is found. This condition may occur if customer places Key Fob near wireless charger while phone is charging. When the key battery is removed and reinstalled, the Key Fob begins to operate normally.
Campaign / software reference: T-TT-0751-24
Source components: ELECTRICAL SYSTEM.
Source record 11003607 at NHTSANHTSA communication ID: 11003552
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers have complained that the wireless functions of their Key Fob stop working. Key Fob LEDs will not turn ON, but engine starts with key held up against start button. Key battery voltage is confirmed OK and no DTC/RoB is found. This condition may occur if customer places Key Fob near wireless charger while phone is charging. When the key battery is removed and reinstalled, the Key Fob begins to operate normally.
Campaign / software reference: T-TT-0751-24
Source components: ELECTRICAL SYSTEM.
Source record 11003552 at NHTSANHTSA communication ID: 10253241
NHTSA source summary · Original PDF not reviewed by Recallfolio
TSB: A head unit software update is now available for 2023 model year Corolla Cross, Corolla Cross Hybrid, Highlander, Highlander Hybrid, and Mirai vehicles equipped with Toyota Multimedia (earlier than version 2050). This software update includes the following improvements: ?User interface design. ?Intelligent assistant. ?Navigation lane guidance. ?Phone book search. ?Bug fixes
Source components: EQUIPMENT:ELECTRICAL:INFOTAINMENT · EQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE.
Source record 10253241 at NHTSANHTSA communication ID: 10253235
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Source components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER.
Source record 10253235 at NHTSANHTSA communication ID: 10253234
NHTSA source summary · Original PDF not reviewed by Recallfolio
DP: The subject vehicles were delivered with only one (1) Smart Key on select models since October 2022 due to a global semiconductor shortage impacting certain microchips. The affected vehicles were delivered with one (1) Smart Key and a second mechanical key.
Source components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER.
Source record 10253234 at NHTSANHTSA communication ID: 10253225
NHTSA source summary · Original PDF not reviewed by Recallfolio
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.
Source components: ELECTRICAL SYSTEM.
Source record 10253225 at NHTSANHTSA communication ID: 10253223
NHTSA source summary · Original PDF not reviewed by Recallfolio
This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
Source components: ENGINE AND ENGINE COOLING · ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION.
Source record 10253223 at NHTSANHTSA communication ID: 10253220
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Source components: UNKNOWN OR OTHER.
Source record 10253220 at NHTSANHTSA communication ID: 10253219
NHTSA source summary · Original PDF not reviewed by Recallfolio
DP: The subject vehicles were delivered with only one (1) Smart Key on select models since October 2022 due to a global semiconductor shortage impacting certain microchips. The affected vehicles were delivered with one (1) Smart Key and a second mechanical key.
Source components: UNKNOWN OR OTHER.
Source record 10253219 at NHTSANHTSA communication ID: 10252251
NHTSA source summary · Original PDF not reviewed by Recallfolio
TSB: Some 2018 ? 2024 model year Toyota vehicles equipped with an A25A-FKS, A25A-FXS, M20A-FKS, or M20A-FXS engine may exhibit one or more of the following conditions: ?Milky/discolored engine oil. ?An ?Oil Pressure Low? warning message on the Multi-information Display (MID). ?A MIL ON condition with Diagnostic Trouble Codes (DTCs) P05202A (Engine Oil Pressure Sensor/Switch ?A? Signal Stuck in Range) and/or P052477 (Engine Oil Pressure Too Low [Severe]) present. Moisture from blow-by gases condenses and accumulates in the engine oil during short trips in extreme cold weather. When the moisture in the oil freezes, the oil pressure may drop, and the aforementioned warning indicators may display. Follow the procedures in this bulletin to address these conditions.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING:COOLING SYSTEM · LANE DEPARTURE · SERVICE BRAKES, HYDRAULIC.
Source record 10252251 at NHTSANHTSA communication ID: 10247824
NHTSA source summary · Original PDF not reviewed by Recallfolio
TI: TECHNICAL INSTRUCTIONS FOR 23TJ01 Second Key Delivery Program Multiple Models and Model Years
Source components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER.
Source record 10247824 at NHTSANHTSA communication ID: 10247823
NHTSA source summary · Original PDF not reviewed by Recallfolio
RL: The supply of Smart Keys available for Toyota vehicles has been temporarily limited to one (1) on select models since October 2022 due to global semiconductor shortages impacting certain microchips. Affected vehicles have been delivered with only one Smart Key and a second mechanical key.
Source components: ELECTRICAL SYSTEM · ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER.
Source record 10247823 at NHTSANHTSA communication ID: 10247822
NHTSA source summary · Original PDF not reviewed by Recallfolio
DP: The subject vehicles were delivered with only one (1) Smart Key on select models since October 2022 due to a global semiconductor shortage impacting certain microchips. The affected vehicles were delivered with one (1) Smart Key and a second mechanical key.
Source components: ELECTRICAL SYSTEM · ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER.
Source record 10247822 at NHTSANHTSA communication ID: 10247817
NHTSA source summary · Original PDF not reviewed by Recallfolio
TSB: Some 2023 model year Highlander vehicles equipped with a T24A-FTS engine may exhibit a MIL ON condition with Diagnostic Trouble Code (DTC) P05CE00 (Cold Start ?B? Camshaft Position Timing Performance Bank 1). The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition. Follow the Repair Procedure in this bulletin to address this condition.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM).
Source record 10247817 at NHTSANHTSA communication ID: 10247809
NHTSA source summary · Original PDF not reviewed by Recallfolio
TI: TECHNICAL INSTRUCTIONS FOR 23TJ01 Second Key Delivery Program Multiple Models and Model Years
Source components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER.
Source record 10247809 at NHTSA