2024 Toyota COROLLA
Manufacturer communications & TSBs.Page 1

T-SB-0104-21 Rev2

NHTSA communication ID: 11029896

NHTSA source summary · Original PDF not reviewed by Recallfolio

OBSOLETE NOTICE February 27, 2026: This bulletin is no longer applicable and is now obsolete.

Campaign / software reference: T-SB-0104-21 Obsolete

Source components: ENGINE.

T-SB-0055-24 Rev2

NHTSA communication ID: 11028712

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2005 – 2026 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.

Campaign / software reference: T-SB-0055-24 Rev2

Source components: UNKNOWN OR OTHER.

T-SB-0088-23 Rev2

NHTSA communication ID: 11022961

NHTSA source summary · Original PDF not reviewed by Recallfolio

OBSOLETE NOTICE August 19, 2025: This bulletin is now obsolete. Please see T-SB-0059-25.

Campaign / software reference: T-SB-0088-23 Obsolete

Source components: ENGINE.

T-SB-0059-25

NHTSA communication ID: 11022958

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2020 – 2025 model year Corolla vehicles may exhibit a vibration or rattle noise from the right-hand engine mounting insulator sub-assembly. This condition will usually go away when the engine’s Revolutions Per Minute (RPM) are above idle. This condition is typically found on vehicles in warm climates/weather. No Diagnostic Trouble Codes (DTCs) are associated with this condition. This condition does not affect the operation of the vehicle.

Campaign / software reference: T-SB-0059-25

Source components: ENGINE.

T-SB-0010-24 Rev2

NHTSA communication ID: 11020670

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2021 – 2022 model year Avalon, 2018 – 2024 Camry, 2019 – 2025 model year Corolla, 2022 – 2025 model year Corolla Cross, and 2019 – 2025 model year RAV4 vehicles with A25A-FKS and M20A-FKS engines may have a MIL ON condition with one or more of the following Diagnostic Trouble Codes (DTCs) upon cold soak start up with engine coolant temperatures between 14°F – 41°F: •P030027 – Random/Multiple Cylinder Misfire Detected (Emission) Signal Rate of Change Above Threshold •P030000 – Random/Multiple Cylinder Misfire Detected •P030100 – Cylinder 1 Misfire Detected •P030200 – Cylinder 2 Misfire Detected •P030300 – Cylinder 3 Misfire Detected •P030400 – Cylinder 4 Misfire Detected

Campaign / software reference: T-SB-0010-24 Rev2

Source components: ELECTRICAL SYSTEM.

T-SB-0058-23 Rev1

NHTSA communication ID: 11020657

NHTSA source summary · Original PDF not reviewed by Recallfolio

The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks.

Campaign / software reference: T-SB-0058-23 Rev1

Source components: ELECTRICAL SYSTEM.

T-TT-0779-25

NHTSA communication ID: 11019331

NHTSA source summary · Original PDF not reviewed by Recallfolio

To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.

Campaign / software reference: T-TT-0779-25

Source components: ELECTRICAL SYSTEM.

T-TT-0779-25

NHTSA communication ID: 11018328

NHTSA source summary · Original PDF not reviewed by Recallfolio

To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.

Campaign / software reference: T-TT-0779-25

Source components: ELECTRICAL SYSTEM.

T-SB-0029-25

NHTSA communication ID: 11015879

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2023 – 2024 model year Corolla vehicles may exhibit a rattling noise condition from the forward recognition camera cover. The forward recognition camera covers have been modified to address this condition.

Campaign / software reference: T-SB-0029-25

Source components: STRUCTURE:BODY.

T-SB-0107-20 Rev2

NHTSA communication ID: 11015882

NHTSA source summary · Original PDF not reviewed by Recallfolio

OBSOLETE NOTICE February 11, 2025: This bulletin is now obsolete. Please see T-SB-0021-25.

Campaign / software reference: T-SB-0107-20 Rev2

Source components: ENGINE.

T-SB-0021-25

NHTSA communication ID: 11016782

NHTSA source summary · Original PDF not reviewed by Recallfolio

Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+) ECU flash reprogramming procedures and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard+ (CUW+). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the GTS+ ECU flash reprogramming process.

Campaign / software reference: T-SB-0021-25

Source components: ENGINE.

T-SB-0013-24 Rev1

NHTSA communication ID: 11016781

NHTSA source summary · Original PDF not reviewed by Recallfolio

The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.

Campaign / software reference: T-SB-0013-24 Rev1

Source components: ELECTRICAL SYSTEM.

T-SB-0021-25

NHTSA communication ID: 11015496

NHTSA source summary · Original PDF not reviewed by Recallfolio

Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+) ECU flash reprogramming procedures and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard+ (CUW+). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the GTS+ ECU flash reprogramming process.

Campaign / software reference: T-SB-0021-25

Source components: ENGINE.

T-SB-0013-24 Rev1

NHTSA communication ID: 11015495

NHTSA source summary · Original PDF not reviewed by Recallfolio

The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.

Campaign / software reference: T-SB-0013-24 Rev1

Source components: ELECTRICAL SYSTEM.

T-SB-0120-20 Rev2

NHTSA communication ID: 11014211

NHTSA source summary · Original PDF not reviewed by Recallfolio

OBSOLETE NOTICE January 30, 2025: This bulletin is now obsolete. Please see T-SB-0015-25.

Campaign / software reference: T-SB-0120-20 Rev2

Source components: ELECTRICAL SYSTEM.

T-SB-0015-25

NHTSA communication ID: 11014209

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2021 – 2025 model year Toyota vehicles may require the download and installation of vehicle specific software or configuration software when the Electronic Control Unit (ECU) is replaced. GTS+ software has been modified to indicate when configuration software is required. A new Configure column has been added to the GTS+ Health Check Results screen to show when configuration software is available for a specific ECU.

Campaign / software reference: T-SB-0015-25

Source components: ELECTRICAL SYSTEM.

T-SB-0111-20 Rev2

NHTSA communication ID: 11014193

NHTSA source summary · Original PDF not reviewed by Recallfolio

OBSOLETE NOTICE January 23, 2025: This bulletin is now obsolete. Please see T-SB-0011-25.

Campaign / software reference: T-SB-0111-20 Rev2

Source components: ELECTRICAL SYSTEM.

T-SB-0011-25

NHTSA communication ID: 11014190

NHTSA source summary · Original PDF not reviewed by Recallfolio

When certain vehicle ECUs are replaced, the ECU Security Key must be written in order for that ECU to communicate on the vehicle network. The GTS+ Software Health Check Results screen has been enhanced to help identify if a replacement ECU requires an ECU Security Key.

Campaign / software reference: T-SB-0011-25

Source components: ELECTRICAL SYSTEM.

T-SB-0010-24 Rev1

NHTSA communication ID: 11012762

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2021 – 2022 model year Avalon, 2018 – 2024 Camry, 2019 – 2025 model year Corolla, 2022 – 2025 model year Corolla Cross, and 2019 – 2025 model year RAV4 vehicles with A25A-FKS and M20A-FKS engines may have a MIL ON condition with one or more of the following Diagnostic Trouble Codes (DTCs) upon cold soak start up with engine coolant temperatures between 14°F – 41°F: •P030027 – Random/Multiple Cylinder Misfire Detected (Emission) Signal Rate of Change Above Threshold •P030000 – Random/Multiple Cylinder Misfire Detected •P030100 – Cylinder 1 Misfire Detected •P030200 – Cylinder 2 Misfire Detected •P030300 – Cylinder 3 Misfire Detected •P030400 – Cylinder 4 Misfire Detected

Campaign / software reference: T-SB-0010-24 Rev1

Source components: STRUCTURE:BODY.

T-SB-0039-24 Rev2

NHTSA communication ID: 11012744

NHTSA source summary · Original PDF not reviewed by Recallfolio

The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

Campaign / software reference: T-SB-0039-24 Rev2

Source components: STRUCTURE:BODY.

T-SB-0038-24 Rev2

NHTSA communication ID: 11012743

NHTSA source summary · Original PDF not reviewed by Recallfolio

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

Campaign / software reference: T-SB-0038-24 Rev2

Source components: STRUCTURE:BODY.

T-SB-0035-24 Rev2

NHTSA communication ID: 11012742

NHTSA source summary · Original PDF not reviewed by Recallfolio

Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

Campaign / software reference: T-SB-0035-24 Rev2

Source components: STRUCTURE:BODY.

T-SB-0061-23 Rev2

NHTSA communication ID: 11012735

NHTSA source summary · Original PDF not reviewed by Recallfolio

Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application.

Campaign / software reference: T-SB-0061-23 Rev2

Source components: STRUCTURE:BODY.

T-SB-0062-23 Rev2

NHTSA communication ID: 11012727

NHTSA source summary · Original PDF not reviewed by Recallfolio

Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.

Campaign / software reference: T-SB-0062-23 Rev2

Source components: STRUCTURE:BODY.

T-TT-0753-24 Rev1

NHTSA communication ID: 11011642

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some technicians may report an engine oil leak from the Engine Oil Level Sensor area

Campaign / software reference: T-TT-0753-24 Rev1

Source components: ENGINE.

T-SB-0098-24

NHTSA communication ID: 11010351

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2022 model year Avalon and Avalon Hybrid, 2022 – 2024 model year Camry, Camry Hybrid, Corolla, Corolla Hatchback, Corolla Hybrid, Highlander, Highlander Hybrid, Prius, Prius Prime, RAV4, RAV4 Hybrid, RAV4 Prime, and Venza Hybrid, 2023 – 2024 model year Crown, and 2024 model year Grand Highlander vehicles may exhibit a high-pitched noise coming from the front HVAC blower motor while operating the air conditioner or heater. This condition does not affect the operation of the vehicle, however, a heater cover has been developed to help reduce or potentially eliminate the noise.

Campaign / software reference: T-SB-0098-24

Source components: STRUCTURE:BODY.

T-SB-0041-24 Rev1

NHTSA communication ID: 11010095

NHTSA source summary · Original PDF not reviewed by Recallfolio

OBSOLETE NOTICE September 24, 2024: This bulletin is now obsolete. Please see T-SB-0081-24

Campaign / software reference: T-SB-0041-24 Rev1

Source components: ENGINE.

T-SB-0081-24

NHTSA communication ID: 11010094

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2023 – 2024 model year Corolla and Corolla Cross vehicles with M20A-FKS engines may exhibit a MIL ON condition with one or both of the following Diagnostic Trouble Codes (DTCs) present: •P11EA00 – (Bank 1 Air-Fuel Ratio Imbalance (Port)) •P013A7C – (A/F Sensor – Rich to Lean Bank 1 Sensor 2 Slow Response) There are no drivability issues or other symptoms associated with this condition.

Campaign / software reference: T-SB-0081-24

Source components: ENGINE.

T-SB-0077-24

NHTSA communication ID: 11010062

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2021 – 2024 model year Corolla, 2022 – 2024 model year Corolla Cross, and 2023 – 2024 model year Corolla Cross Hybrid vehicles with M20A-FKS or M20A-FXS engines may exhibit an oil leak that originates between the oil pan sub-assembly and the stiffening crankcase assembly.

Campaign / software reference: T-SB-0077-24

Source components: ENGINE.

T-SB-0055-24 Rev1

NHTSA communication ID: 11007455

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.

Campaign / software reference: T-SB-0055-24 Rev1

Source components: STRUCTURE:BODY.

T-SB-0055-24 Rev1

NHTSA communication ID: 11006161

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.

Campaign / software reference: T-SB-0055-24 Rev1

Source components: STRUCTURE:BODY.

T-SB-0088-23 Rev2

NHTSA communication ID: 11007447

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2020 – 2024 model year Corolla vehicles may exhibit a vibration or rattle noise from the right-hand engine mounting insulator sub-assembly. This condition will usually go away when the engine Revolutions Per Minute (RPM) are above idle. This condition is typically found on vehicles in warm climates/weather. No Diagnostic Trouble Codes (DTCs) are associated with this condition. This condition does not affect the operation of the vehicle.

Campaign / software reference: T-SB-0088-23 Rev2

Source components: ENGINE.

T-SB-0088-23 Rev2

NHTSA communication ID: 11006153

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2020 – 2024 model year Corolla vehicles may exhibit a vibration or rattle noise from the right-hand engine mounting insulator sub-assembly. This condition will usually go away when the engine Revolutions Per Minute (RPM) are above idle. This condition is typically found on vehicles in warm climates/weather. No Diagnostic Trouble Codes (DTCs) are associated with this condition. This condition does not affect the operation of the vehicle.

Campaign / software reference: T-SB-0088-23 Rev2

Source components: ENGINE.

T-SB-0039-24 Rev1

NHTSA communication ID: 11007445

NHTSA source summary · Original PDF not reviewed by Recallfolio

The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

Campaign / software reference: T-SB-0039-24 Rev1

Source components: STRUCTURE:BODY.

T-SB-0038-24 Rev1

NHTSA communication ID: 11007444

NHTSA source summary · Original PDF not reviewed by Recallfolio

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

Campaign / software reference: T-SB-0038-24 Rev1

Source components: STRUCTURE:BODY.

T-SB-0035-24 Rev1

NHTSA communication ID: 11007443

NHTSA source summary · Original PDF not reviewed by Recallfolio

Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

Campaign / software reference: T-SB-0035-24 Rev1

Source components: STRUCTURE:BODY.

T-SB-0039-24 Rev1

NHTSA communication ID: 11006151

NHTSA source summary · Original PDF not reviewed by Recallfolio

The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

Campaign / software reference: T-SB-0039-24 Rev1

Source components: STRUCTURE:BODY.

T-SB-0038-24 Rev1

NHTSA communication ID: 11006150

NHTSA source summary · Original PDF not reviewed by Recallfolio

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

Campaign / software reference: T-SB-0038-24 Rev1

Source components: STRUCTURE:BODY.

T-SB-0035-24 Rev1

NHTSA communication ID: 11006149

NHTSA source summary · Original PDF not reviewed by Recallfolio

Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

Campaign / software reference: T-SB-0035-24 Rev1

Source components: STRUCTURE:BODY.

T-SB-0055-24

NHTSA communication ID: 11005122

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.

Campaign / software reference: T-SB-0055-24

Source components: STRUCTURE:BODY.

T-SB-0055-24

NHTSA communication ID: 11005064

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.

Campaign / software reference: T-SB-0055-24

Source components: STRUCTURE:BODY.

T-SB-0103-20 Rev1

NHTSA communication ID: 11005119

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 – 2025 model year Toyota vehicles.

Campaign / software reference: T-SB-0103-20 Rev1

Source components: ENGINE.

T-SB-0103-20 Rev1

NHTSA communication ID: 11005061

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 – 2025 model year Toyota vehicles.

Campaign / software reference: T-SB-0103-20 Rev1

Source components: ENGINE.

T-SB-0061-23 Rev1

NHTSA communication ID: 11005153

NHTSA source summary · Original PDF not reviewed by Recallfolio

Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.

Campaign / software reference: T-SB-0061-23 Rev1

Source components: STRUCTURE:BODY.

T-SB-0062-23 Rev1

NHTSA communication ID: 11005149

NHTSA source summary · Original PDF not reviewed by Recallfolio

Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.

Campaign / software reference: T-SB-0062-23 Rev1

Source components: STRUCTURE:BODY.

T-SB-0041-24

NHTSA communication ID: 11003653

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2023 – 2024 model year Corolla and Corolla Cross vehicles with M20A-FKS engines may exhibit a MIL ON condition with Diagnostic Trouble Code (DTC) P11EA00 (Bank 1 Air-Fuel Ratio Imbalance (Port)) present. There are no drivability issues or other symptoms associated with this condition.

Campaign / software reference: T-SB-0041-24

Source components: ENGINE.

T-SB-0041-24

NHTSA communication ID: 11003598

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2023 – 2024 model year Corolla and Corolla Cross vehicles with M20A-FKS engines may exhibit a MIL ON condition with Diagnostic Trouble Code (DTC) P11EA00 (Bank 1 Air-Fuel Ratio Imbalance (Port)) present. There are no drivability issues or other symptoms associated with this condition.

Campaign / software reference: T-SB-0041-24

Source components: ENGINE.

T-SB-0039-24

NHTSA communication ID: 11003649

NHTSA source summary · Original PDF not reviewed by Recallfolio

The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

Campaign / software reference: T-SB-0039-24

Source components: STRUCTURE:BODY.

T-SB-0038-24

NHTSA communication ID: 11003647

NHTSA source summary · Original PDF not reviewed by Recallfolio

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. •The entire bulletin has been updated.

Campaign / software reference: T-SB-0038-24

Source components: STRUCTURE:BODY.

T-SB-0035-24

NHTSA communication ID: 11003644

NHTSA source summary · Original PDF not reviewed by Recallfolio

Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

Campaign / software reference: T-SB-0035-24

Source components: STRUCTURE:BODY.

T-SB-0039-24

NHTSA communication ID: 11003594

NHTSA source summary · Original PDF not reviewed by Recallfolio

The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

Campaign / software reference: T-SB-0039-24

Source components: STRUCTURE:BODY.

T-SB-0038-24

NHTSA communication ID: 11003592

NHTSA source summary · Original PDF not reviewed by Recallfolio

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. •The entire bulletin has been updated.

Campaign / software reference: T-SB-0038-24

Source components: STRUCTURE:BODY.

T-SB-0035-24

NHTSA communication ID: 11003589

NHTSA source summary · Original PDF not reviewed by Recallfolio

Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

Campaign / software reference: T-SB-0035-24

Source components: STRUCTURE:BODY.

T-SB-0120-20 Rev2

NHTSA communication ID: 11003640

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2021 – 2024 model year Toyota vehicles may require the download and installation of vehicle specific software or configuration software when the Electronic Control Unit (ECU) is replaced. GTS+ software has been modified to indicate when configuration software is required. A new Configure column has been added to the GTS+ Health Check Results screen to show when configuration software is available for a specific ECU. REVISION NOTICE April 18, 2024 Rev2: •Applicability has been updated to include 2024 model year Tundra, Tundra Hybrid, Venza Hybrid, bZ4X, Corolla, Corolla Cross, Corolla Cross Hybrid, Corolla Hybrid, Crown, GR Corolla, Corolla Hatchback, Prius, Prius Prime, Sequoia Hybrid, Highlander, Grand Highlander, Grand Highlander Hybrid, Land Cruiser, Tacoma, Tacoma Hybrid, and Mirai vehicles and 2023 model year Corolla Hatchback and Prius Prime vehicles. •The Introduction section has been updated. •The Operation Procedure section has been removed. •The Standard ECU Configuration Procedure and ECU Configuration Value Writing Procedure sections have been added.

Campaign / software reference: T-SB-0120-20

Source components: ELECTRICAL SYSTEM · ENGINE.

T-SB-0120-20 Rev2

NHTSA communication ID: 11003585

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2021 – 2024 model year Toyota vehicles may require the download and installation of vehicle specific software or configuration software when the Electronic Control Unit (ECU) is replaced. GTS+ software has been modified to indicate when configuration software is required. A new Configure column has been added to the GTS+ Health Check Results screen to show when configuration software is available for a specific ECU. REVISION NOTICE April 18, 2024 Rev2: •Applicability has been updated to include 2024 model year Tundra, Tundra Hybrid, Venza Hybrid, bZ4X, Corolla, Corolla Cross, Corolla Cross Hybrid, Corolla Hybrid, Crown, GR Corolla, Corolla Hatchback, Prius, Prius Prime, Sequoia Hybrid, Highlander, Grand Highlander, Grand Highlander Hybrid, Land Cruiser, Tacoma, Tacoma Hybrid, and Mirai vehicles and 2023 model year Corolla Hatchback and Prius Prime vehicles. •The Introduction section has been updated. •The Operation Procedure section has been removed. •The Standard ECU Configuration Procedure and ECU Configuration Value Writing Procedure sections have been added.

Campaign / software reference: T-SB-0120-20

Source components: ELECTRICAL SYSTEM · ENGINE.

T-SB-0111-20 Rev2

NHTSA communication ID: 11003621

NHTSA source summary · Original PDF not reviewed by Recallfolio

When certain vehicle ECUs are replaced, the ECU Security Key must be written in order for that ECU to communicate on the vehicle network. The GTS+ Software Health Check Results screen has been enhanced to help identify if a replacement ECU requires an ECU Security Key. REVISION NOTICE April 11, 2024 Rev2: •Applicability has been updated to include 2023 – 2024 model year 86, Corolla, Corolla Cross, Corolla Cross Hybrid, Crown, GR Corolla, Mirai, Prius, Prius Prime, RAV4 Prime, Sequoia Hybrid, Sienna Hybrid, Tundra, Tundra Hybrid, Venza Hybrid, and Yaris and 2024 model year bZ4X, Highlander, Highlander Hybrid, Grand Highlander, and Grand Highlander Hybrid vehicles. •The entire bulletin has been updated to represent GTS+ Software. July 08, 2022 Rev1: •Applicability has been updated to include 2022 model year 86, Corolla Cross, Mirai, Tundra, and Tundra Hybrid vehicles and 2023 model year bZ4X vehicles. Any previous printed versions of this bulletin should be discarded.

Campaign / software reference: T-SB-0111-20

Source components: ELECTRICAL SYSTEM.

T-TT-0754-24

NHTSA communication ID: 11003619

NHTSA source summary · Original PDF not reviewed by Recallfolio

Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.

Campaign / software reference: T-TT-0754-24

Source components: ELECTRICAL SYSTEM.

T-SB-0111-20 Rev2

NHTSA communication ID: 11003566

NHTSA source summary · Original PDF not reviewed by Recallfolio

When certain vehicle ECUs are replaced, the ECU Security Key must be written in order for that ECU to communicate on the vehicle network. The GTS+ Software Health Check Results screen has been enhanced to help identify if a replacement ECU requires an ECU Security Key. REVISION NOTICE April 11, 2024 Rev2: •Applicability has been updated to include 2023 – 2024 model year 86, Corolla, Corolla Cross, Corolla Cross Hybrid, Crown, GR Corolla, Mirai, Prius, Prius Prime, RAV4 Prime, Sequoia Hybrid, Sienna Hybrid, Tundra, Tundra Hybrid, Venza Hybrid, and Yaris and 2024 model year bZ4X, Highlander, Highlander Hybrid, Grand Highlander, and Grand Highlander Hybrid vehicles. •The entire bulletin has been updated to represent GTS+ Software. July 08, 2022 Rev1: •Applicability has been updated to include 2022 model year 86, Corolla Cross, Mirai, Tundra, and Tundra Hybrid vehicles and 2023 model year bZ4X vehicles. Any previous printed versions of this bulletin should be discarded.

Campaign / software reference: T-SB-0111-20

Source components: ELECTRICAL SYSTEM.

T-TT-0754-24

NHTSA communication ID: 11003564

NHTSA source summary · Original PDF not reviewed by Recallfolio

Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.

Campaign / software reference: T-TT-0754-24

Source components: ELECTRICAL SYSTEM.

T-TT-0753-24

NHTSA communication ID: 11003613

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some technicians may report an engine oil leak from the Engine Oil Level Sensor area

Campaign / software reference: T-TT-0753-24

Source components: ENGINE.

T-TT-0753-24

NHTSA communication ID: 11003558

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some technicians may report an engine oil leak from the Engine Oil Level Sensor area

Campaign / software reference: T-TT-0753-24

Source components: ENGINE.

T-SB-0088-23

NHTSA communication ID: 11003604

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2020 – 2024 model year Corolla vehicles may exhibit a vibration or rattle noise from the right-hand engine mounting insulator sub-assembly. This condition will usually go away when the engine Revolutions Per Minute (RPM) are above idle. This condition is typically found on vehicles in warm climates/weather. No Diagnostic Trouble Codes (DTCs) are associated with this condition. REVISION NOTICE April 01, 2024 Rev1: •The Warranty Information section has been updated

Campaign / software reference: T-SB-0088-23

Source components: ENGINE.

T-SB-0088-23

NHTSA communication ID: 11003549

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2020 – 2024 model year Corolla vehicles may exhibit a vibration or rattle noise from the right-hand engine mounting insulator sub-assembly. This condition will usually go away when the engine Revolutions Per Minute (RPM) are above idle. This condition is typically found on vehicles in warm climates/weather. No Diagnostic Trouble Codes (DTCs) are associated with this condition. REVISION NOTICE April 01, 2024 Rev1: •The Warranty Information section has been updated

Campaign / software reference: T-SB-0088-23

Source components: ENGINE.

T-SB-0013-24

NHTSA communication ID: 10253225

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.

Source components: ELECTRICAL SYSTEM.

T-PANT-2024-004-

NHTSA communication ID: 10253223

NHTSA source summary · Original PDF not reviewed by Recallfolio

This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.

Source components: ENGINE AND ENGINE COOLING · ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION.

TSB002723

NHTSA communication ID: 10252257

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle.

Source components: TIRES.

TSB002623

NHTSA communication ID: 10252256

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately.

Source components: EQUIPMENT.

TSB002523

NHTSA communication ID: 10252255

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: Hybrid vehicles (HV) and battery electric vehicles (BEV) are equipped with two types of batteries: ?Hybrid vehicle (HV) battery. ?Auxiliary (12V) battery. If a hybrid or battery electric vehicle is put into storage, the State-Of-Charge (SOC) of its HV battery and auxiliary battery will gradually decrease. To prevent the auxiliary battery from becoming discharged during storage, proper maintenance is necessary. As a matter of policy, Toyota does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified SOC of the vehicle?s battery while in stock and ensure proper SOC at delivery. Perform the following maintenance service for the HV battery and auxiliary battery.

Source components: FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY.

TSB010421

NHTSA communication ID: 10252251

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: Some 2018 ? 2024 model year Toyota vehicles equipped with an A25A-FKS, A25A-FXS, M20A-FKS, or M20A-FXS engine may exhibit one or more of the following conditions: ?Milky/discolored engine oil. ?An ?Oil Pressure Low? warning message on the Multi-information Display (MID). ?A MIL ON condition with Diagnostic Trouble Codes (DTCs) P05202A (Engine Oil Pressure Sensor/Switch ?A? Signal Stuck in Range) and/or P052477 (Engine Oil Pressure Too Low [Severe]) present. Moisture from blow-by gases condenses and accumulates in the engine oil during short trips in extreme cold weather. When the moisture in the oil freezes, the oil pressure may drop, and the aforementioned warning indicators may display. Follow the procedures in this bulletin to address these conditions.

Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING:COOLING SYSTEM · LANE DEPARTURE · SERVICE BRAKES, HYDRAULIC.

TSB002823

NHTSA communication ID: 10252249

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: 2024 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle?s glove box for customer reference.

Source components: EQUIPMENT.

TSB002423

NHTSA communication ID: 10252247

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Toyota does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, All dealers should test the auxiliary (12V) battery and recharge, if necessary, no more than 48 hours before delivery to the customer.

Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY · EQUIPMENT · EQUIPMENT:OTHER:LABELS.

TSB008823

NHTSA communication ID: 10247803

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: Some 2020 ? 2024 model year Corolla vehicles may exhibit a vibration or rattle noise from the right-hand engine mounting insulator sub-assembly. This condition will usually go away when the engine Revolutions Per Minute (RPM) are above idle. This condition is typically found on vehicles in warm climates/weather. No Diagnostic Trouble Codes (DTCs) are associated with this condition. Follow the Repair Procedure in this bulletin to improve this condition.

Source components: ENGINE · STRUCTURE.

TSB005623

NHTSA communication ID: 10244138

NHTSA source summary · Original PDF not reviewed by Recallfolio

This bulletin contains the PDS procedures that apply specifically to 2024 model year Corolla, Corolla Hatchback, and Corolla Hybrid vehicles. A universal PDS Check Sheet that contains PDS steps that apply to all 2024 model year Toyota vehicles has been developed. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet.

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

TSB002823

NHTSA communication ID: 10244124

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: 2024 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle?s glove box for customer reference.

Source components: EQUIPMENT.

TSB002623

NHTSA communication ID: 10244123

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately.

Source components: EQUIPMENT.

TSB002423

NHTSA communication ID: 10244122

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Toyota does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, All dealers should test the auxiliary (12V) battery and recharge, if necessary, no more than 48 hours before delivery to the customer.

Source components: EQUIPMENT.

LSB001923

NHTSA communication ID: 10244118

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately.

Source components: EQUIPMENT.

TTT073723

NHTSA communication ID: 10244111

NHTSA source summary · Original PDF not reviewed by Recallfolio

TT: A very small percentage of customers experience operational difficulties with some telematics features which they cannot resolve on their own. These resources, in conjunction with the Repair Manual, are for dealership personnel to assist those customers with user issues, user errors, and compatibility issues with other vehicle systems and external applications encountered while operating telematics features. Toyota has developed and provided the following Telematics Diagnostic Guide to assist dealer technicians.

Source components: COMMUNICATION:MANUFACTURER TELEMATICS · UNKNOWN OR OTHER.