Original record summaries, dates and identifiers for this model-year. Records 301–396 of 396, ordered newest first. Dated records on this page: Mar 20, 2013–Nov 13, 2015.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Nov 13, 2015Service Bulletin/Repair Instructions
0500515REVA
NHTSA communication ID: 10218010
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin involves replacing the front brake pads and related hardware.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Front Brake Squeak/Squeal Noise This bulletin involves replacing the front brake pads and related hardware. The customer may describe a front brake squeak/squeal noise when applying the brakes.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Right Sliding Door Will Not Open From Exterior This bulletin involves replacing the right sliding door exterior handle and rerouting door cable. The customer may describe that the right sliding door may not open using the exterior handle.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: BCM Update To Correct Various Symptoms This bulletin involves updating the Body Control Module (BCM) software. Body Control Module (BCM) software updates are available to address the following conditions or erroneous Diagnostic Trouble Codes (DTCs): ? U0019-01-CAN B BUS - General Electrical Failure. ? Fog light telltale stays illuminated when the high-beams are turned on. ? Allow for vehicle to be locked with the key in the ignition. Additional update for upfitters to correct the following conditions when using LED bulbs for the turn signals and enabling the ?Bulb Out Diagnostics?. ? External lamp failure icon being illuminated. ? Turn signal indicators flash at double the normal speed. ? The bulb out message will be displayed on the Electronic Vehicle Information Center (EVIC).
Source components: AIR BAGS · ELECTRICAL SYSTEM · STRUCTURE · VISIBILITY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Right Sliding Door Will Not Open From Exterior This bulletin involves replacing the right sliding door exterior handle and rerouting door cable. The customer may describe that the right sliding door may not open using the exterior handle.
Source components: LATCHES/LOCKS/LINKAGES:FUELING/CHARGING DOOR/HATCH/PORT:LATCH/LOCK RELEASE SYSTEM · VEHICLE SPEED CONTROL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: BCM Update To Correct Various Symptoms This bulletin involves updating the Body Control Module (BCM) software. Body Control Module (BCM) software updates are available to address the following conditions or erroneous Diagnostic Trouble Codes (DTCs): ? U0019-01-CAN B BUS - General Electrical Failure. ? Fog light telltale stays illuminated when the high-beams are turned on. ? Allow for vehicle to be locked with the key in the ignition. Additional update for upfitters to correct the following conditions when using LED bulbs for the turn signals and enabling the ?Bulb Out Diagnostics?. ? External lamp failure icon being illuminated. ? Turn signal indicators flash at double the normal speed. ? The bulb out message will be displayed on the Electronic Vehicle Information Center (EVIC).
Source components: AIR BAGS · ELECTRICAL SYSTEM · STRUCTURE · VISIBILITY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Right Sliding Door Will Not Open From Exterior This bulletin involves replacing the right sliding door exterior handle and rerouting door cable. The customer may describe that the right sliding door may not open using the exterior handle.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: BCM Update To Correct Various Symptoms This bulletin involves updating the Body Control Module (BCM) software. Body Control Module (BCM) software updates are available to address the following conditions or erroneous Diagnostic Trouble Codes (DTCs): ? U0019-01-CAN B BUS - General Electrical Failure. ? Fog light telltale stays illuminated when the high-beams are turned on. ? Allow for vehicle to be locked with the key in the ignition. Additional update for upfitters to correct the following conditions when using LED bulbs for the turn signals and enabling the ?Bulb Out Diagnostics?. ? External lamp failure icon being illuminated. ? Turn signal indicators flash at double the normal speed. ? The bulb out message will be displayed on the Electronic Vehicle Information Center (EVIC).
Source components: ELECTRICAL SYSTEM · VISIBILITY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Title 68245351AB: Switch - Steering Wheel Lt Start Date: 10/27/2015 7:00 AM End Date Message You have been identified as either having stock, or have stock in transit to your dealership. Please return all suspect stock of follow ing part number: 68245351AB. See the attached file for identifying suspect material. Please return suspect parts back to your facing depot using Return Code 02, before 17 November, 2015. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
Source components: STEERING · STEERING: STEERING WHEEL/HANDLE BAR.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Title 05182600AC: Molding Assy - RR Door LWR RT Start Date: 10/23/2015 7:00 AM End Date Message You have been identified as either having stock, or have stock in transit to your dealership. Please return all suspect stock of following part number: 05182600AC. See the attached file for identifying suspect material. Please return suspect parts back to your facing depot using Return Code 02, before 13 November, 2015. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Title Filter - Engine Oil Start Date: 10/23/2015 7:00 AM End Date Message You have been identified as either having stock, or have stock in transit to your dealership. Please return all stock of following part number: 68109834AA. Replacement part number is: 68229402AA. 68229402AA is designed to work on both DS and W K with 3.0L Ecodiesel(EXF)in NAFTA. Please return suspect parts back to your facing depot using Return Code 02, before 13 November, 2015. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Title 68260866AB: Module Kit - Occupant Classification Start Date: 10/22/2015 7:00 AM End Date Message You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 68260866AB. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 12 November, 2015. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Title Control Module - Air Bag Electronic Control w/side Capability Start Date: 10/19/2015 7:00 AM End Date Message You have been identified as either having stock, or have stock in transit to your dealership. Please return all stock of following part numbers: 68085880AD, 68085880AF, 68085881AE, 68085881AF, 68085881AG. Replacement part numbers are: 68085880AG, and 68085881AH. Please return suspect parts back to your facing depot using Return Code 02, before 09 November, 2015. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
Source components: AIR BAGS · AIR BAGS: AIR BAG/RESTRAINT CONTROL MODULE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Title 68146401AA: Tube - Fuel Filler Start Date: 10/19/2015 7:00 AM End Date Message You have been identified as either having stock, or have stock in transit to your dealership. Please return all suspect stock of following part number: 68146401AA. See the attached file for identifying suspect material. Please return suspect parts back to your facing depot using Return Code 02, before 09 November, 2015. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
Source components: FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Title MasterShield Products Start Date: 10/28/2015 7:00 AM End Date Message You have been identified as either having MasterShield Products in stock, or have stock in transit to your dealership. Please return all stock of follow ing part numbers: 82212074, 82212075, 82212076, 82212077, 82212078, & 82213598 . Please return suspect parts back to your facing depot using Return Code 02, before 18 November, 2015. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Title Inspection and Return: Hydro-Booster, - Power Brake. Start Date: 10/27/2015 7:00 AM End Date Message You have been identified as either having stock, or have stock in transit to your dealership. Please return all suspect stock of part numbers: 68144663AA, 52013874AE. See the attached file for identifying suspect material. Please return suspect parts back to your facing depot using Return Code 02, before 17 November, 2015. Return any open orders in process too. Direct all questions via email to MOPARQC@fcagroup.com
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 3.0L Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs): ? P0299 - Turbocharger Underboost ? P226C - Turbocharger Boost Control Slow Response ? P0181 - Fuel Temperature Sensor Circuit Low ? P2BA9 - NOx Exceedence - Insufficient Reductant Quality ? P0401 - EGR System Performance ? P00AF - Turbocharger Boost Control Module A Performance ? P203B - Reductant Level Sensor 1 Circuit Performance ? P203E - Reductant Level Sensor 1 Circuit Intermittent-Erratic ? P22FA - NOx Sensor Performance Slow Response High to Low Bank 1 Sensor 1 ? P2458 - Diesel Particulate Filter Regeneration Duration ? P2459 - Diesel Particulate Filter Regeneration Frequency ? P2463 - Diesel Particulate Filter - Soot Accumulation ? P0402 - Exhuast Gas Recirculation Flow Excessive Detected ? P04FB - Crankcase Ventilation Hose Connection Sensor Range/Performance ? P04E2 - Crankcase Ventilation Hose Connection Sensor Circuit Low ? P051B - Crankcase Pressure Sensor Circuit Range/Performance ? P051C - Crankcase Pressure Sensor Circuit Low ? P051D - Crankcase Pressure Sensor Circuit High ? P04DB - Crankcase Ventilation System Disconnected ? P04FC - Crankcase Ventilation System Performance ? P011B - Engine Coolant Temperature / Intake Air Temperature Correlation ? P04D9 - Closed Loop EGR Control At Limit Flow Too Low ? P04DA - Closed Loop EGR Control At Limit Flow Too High In addition to the DTCs listed above, this software also corrects a condition where incorrect glow plugs were being identified when glow plug DTCs were set for cylinders 2, 3, and 4.
Source components: BACK OVER PREVENTION · ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING · EQUIPMENT · EXTERIOR LIGHTING · FUEL SYSTEM, DIESEL · FUEL SYSTEM, GASOLINE · SERVICE BRAKES, HYDRAULIC.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 3.0L Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs): ? P0299 - Turbocharger Underboost ? P226C - Turbocharger Boost Control Slow Response ? P0181 - Fuel Temperature Sensor Circuit Low ? P2BA9 - NOx Exceedence - Insufficient Reductant Quality ? P0401 - EGR System Performance ? P00AF - Turbocharger Boost Control Module A Performance ? P203B - Reductant Level Sensor 1 Circuit Performance ? P203E - Reductant Level Sensor 1 Circuit Intermittent-Erratic ? P22FA - NOx Sensor Performance Slow Response High to Low Bank 1 Sensor 1 ? P2458 - Diesel Particulate Filter Regeneration Duration ? P2459 - Diesel Particulate Filter Regeneration Frequency ? P2463 - Diesel Particulate Filter - Soot Accumulation ? P0402 - Exhuast Gas Recirculation Flow Excessive Detected ? P04FB - Crankcase Ventilation Hose Connection Sensor Range/Performance ? P04E2 - Crankcase Ventilation Hose Connection Sensor Circuit Low ? P051B - Crankcase Pressure Sensor Circuit Range/Performance ? P051C - Crankcase Pressure Sensor Circuit Low ? P051D - Crankcase Pressure Sensor Circuit High ? P04DB - Crankcase Ventilation System Disconnected ? P04FC - Crankcase Ventilation System Performance ? P011B - Engine Coolant Temperature / Intake Air Temperature Correlation ? P04D9 - Closed Loop EGR Control At Limit Flow Too Low ? P04DA - Closed Loop EGR Control At Limit Flow Too High In addition to the DTCs listed above, this software also corrects a condition where incorrect glow plugs were being identified when glow plug DTCs were set for cylinders 2, 3, and 4.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM) · POWER TRAIN:MANUAL TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 3.0L Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs): ? P0299 - Turbocharger Underboost ? P226C - Turbocharger Boost Control Slow Response ? P0181 - Fuel Temperature Sensor Circuit Low ? P2BA9 - NOx Exceedence - Insufficient Reductant Quality ? P0401 - EGR System Performance ? P00AF - Turbocharger Boost Control Module A Performance ? P203B - Reductant Level Sensor 1 Circuit Performance ? P203E - Reductant Level Sensor 1 Circuit Intermittent-Erratic ? P22FA - NOx Sensor Performance Slow Response High to Low Bank 1 Sensor 1 ? P2458 - Diesel Particulate Filter Regeneration Duration ? P2459 - Diesel Particulate Filter Regeneration Frequency ? P2463 - Diesel Particulate Filter - Soot Accumulation ? P0402 - Exhuast Gas Recirculation Flow Excessive Detected ? P04FB - Crankcase Ventilation Hose Connection Sensor Range/Performance ? P04E2 - Crankcase Ventilation Hose Connection Sensor Circuit Low ? P051B - Crankcase Pressure Sensor Circuit Range/Performance ? P051C - Crankcase Pressure Sensor Circuit Low ? P051D - Crankcase Pressure Sensor Circuit High ? P04DB - Crankcase Ventilation System Disconnected ? P04FC - Crankcase Ventilation System Performance ? P011B - Engine Coolant Temperature / Intake Air Temperature Correlation ? P04D9 - Closed Loop EGR Control At Limit Flow Too Low ? P04DA - Closed Loop EGR Control At Limit Flow Too High In addition to the DTCs listed above, this software also corrects a condition where incorrect glow plugs were being identified when glow plug DTCs were set for cylinders 2, 3, and 4.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Message You have been identified as either having stock, or have stock in transit to your dealership. Please return all suspect stock of following part number: 05026886AJ. See the attached file for identifying suspect material. Please return suspect parts back to your facing depot using Return Code 02, before 02 November, 2015. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com
NHTSA source summary · Original PDF not reviewed by Recallfolio
Title Win Kit - Transmitters and Win Start Date: 10/12/2015 7:00 AM End Date Message You have been identified as either having stock, or have stock in transit to your dealership. Please return following part numbers: CBTTP57FAA, & CBTTP57FAB. Replacement part number CBTTP57FAC will be available week beginning 26 O ct., 2015. There are reports of pre-programmed FO BS in these kits, preventing dealer pairing of W IN and Transmitter Key FO BS. If repair is needed prior to new part availability, order two of part number 05026886AK transmitter Integrated Key FO B. Please return suspect parts back to your facing depot using Return Code 02, before 06 November, 2015. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Keyless Entry Transponder Will Not Cycle Door Locks And/Or Bulb Out Indication When Hazard Lights Are Activated This bulletin involves reprogramming of the Body Control Module (BCM) with the latest available software. On vehicles upfitted with LED tail lamps, the customer and/or technician may notice one or more of the following: ? An erroneous bulb out indication message in the Electronic Vehicle Information Center (EVIC). ? Turn signal indicator flashes at double of the normal speed when the hazard warning flasher is activated. ? The Frequency Operated Button Integrated Key (FOBIK) will not cycle the door locks.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Keyless Entry Transponder Will Not Cycle Door Locks And/Or Bulb Out Indication When Hazard Lights Are Activated This bulletin involves reprogramming of the Body Control Module (BCM) with the latest available software. On vehicles upfitted with LED tail lamps, the customer and/or technician may notice one or more of the following: ? An erroneous bulb out indication message in the Electronic Vehicle Information Center (EVIC). ? Turn signal indicator flashes at double of the normal speed when the hazard warning flasher is activated. ? The Frequency Operated Button Integrated Key (FOBIK) will not cycle the door locks.
Source components: ELECTRICAL SYSTEM · ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM · EQUIPMENT · STRUCTURE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Keyless Entry Transponder Will Not Cycle Door Locks And/Or Bulb Out Indication When Hazard Lights Are Activated This bulletin involves reprogramming of the Body Control Module (BCM) with the latest available software. On vehicles upfitted with LED tail lamps, the customer and/or technician may notice one or more of the following: ? An erroneous bulb out indication message in the Electronic Vehicle Information Center (EVIC). ? Turn signal indicator flashes at double of the normal speed when the hazard warning flasher is activated. ? The Frequency Operated Button Integrated Key (FOBIK) will not cycle the door locks.
Source components: ELECTRICAL SYSTEM · EQUIPMENT · EQUIPMENT:ELECTRICAL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
RAM PROMASTER: REPROGRAMMING OF BODY CONTROL MODULE WITH NEWEST SOFTWARE AVAILABLE DUE TO DOOR LOCKS NOT BEING CYCLED WITH FREQUENCY OPERATED BUTTON INTEGRATED KEY, ERRONEOUS BULB OUT INDICATING MESSAGE IN ELECTRONIC VEHICLE INFORMATION CENTER *CN
NHTSA source summary · Original PDF not reviewed by Recallfolio
Part Description: Flex Plate Issue Description: If the part you are replacing is cracked; FCA would like to have the transmission replaced with the flexplate. Please call Jian Zhu on his cell (248) 379-1132.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Part Description: Flex Plate Issue Description: If the part you are replacing is cracked; FCA would like to have the transmission replaced with the flexplate. Please call Jian Zhu on his cell (248) 379-1132.
Source components: EQUIPMENT · POWER TRAIN:AUTOMATIC TRANSMISSION · POWER TRAIN:MANUAL TRANSMISSION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Part Description: Flex Plate Issue Description: If the part you are replacing is cracked; FCA would like to have the transmission replaced with the flexplate. Please call Jian Zhu on his cell (248) 379-1132.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Title Inspection and return of PN 68210332AA - FUEL PRESSURE SENSOR Start Date: 10/6/2015 7:00 AM End Date Message You are receiving this email as you have been identified to have stock on hand or have stock in transit to your dealership. Reports of dealers receiving incorrect fuel pressure sensors packaged as 68210332AA. Correct and suspect parts can be identified visually by the color of the label on the sensors. Correct sensors have white color label on the part whereas the suspect sensors have yellow colored labels. Reference pictures attached for visual identification. Please inspect stock on hand and return any suspect parts found back to your facing PDC using MRA code 02. Replacement parts can be obtained by reordering the same part number. Direct all questions via email to vn83@chrysler.com
NHTSA source summary · Original PDF not reviewed by Recallfolio
Title Latch Assy. Hood W/AJAR Switch Start Date: 10/6/2015 7:00 AM End Date Message You have been identified as either having stock,or have stock in transit to your dealership. Please return all suspect stock of following part numbers:68159725AB,& 68261143AA. See the attached file for identifying suspect material. Please return suspect parts back to your facing depot using Return Code 02,before 27 O ctober,2015. Return any open orders in process too. Direct all questions via email to MO PARQ C@fcagroup.com
NHTSA source summary · Original PDF not reviewed by Recallfolio
Mopar Trailer Tow Mirror Kit After installing the Mopar Trailer Tow Mirror Kit, configure the vehicle for Trailer Tow mirrors. To do this, add the LEG (Trailer Tow Mirrors) sales code to the VIN using DealerCONNECT and then performing a vehicle re-configuration using the WiTech tool.~ After Kit is completely installed, perform the following;~ 1. Add LEG sales code to the VIN under the ?Vehicle Option Updates? Found on Dealerconnect~ 2. Update Vehicle Configuration by using the WiTech tool and performing ?Restore Vehicle Configuration.?
NHTSA source summary · Original PDF not reviewed by Recallfolio
Spare Tire Kit For vehicles with Alloy Wheels, an adapter is required (not included) to connect the alloy wheel to the spare tire winch cable when storing under the vehicle. The adapter is part number 6824863AA and requires three (3) mounting nuts; PN 68150129AA.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2014 KL 9-Speed service transaxle with 2015 common hardware This 9-speed transaxle must be ordered thru Mopar?s Powertrain Service Center (PSC) for a specific VIN and must be installed in that vehicle or the correct calibration will not load to the Engine Control Module (ECM) and Transmission Control Module (TCM).~ This 9-speed transaxle assembly requires an update to the Engine Control Module AND the Transmission Control Module using WiTech. Failure to complete both updates will result in possible damage and/or incorrect operation of this unit.
NHTSA source summary · Original PDF not reviewed by Recallfolio
RA3/RA4 Radio The MY16 RA3/4 radios are susceptible to randomly set an erroneously BCM or IPC ?U0184 - Loss of Com with Radio? fault. The radio should not be replaced for this issue if the fault is stored, if the code cannot be reproduced and no trouble can be found (radio functions properly). In this case it is no impact to the customer in any way. Do NOT replace the radio for this issue. Please contact John Carlesimo at cell (248) 941-8756 if you have any further questions regarding this fault.
NHTSA source summary · Original PDF not reviewed by Recallfolio
HVAC Blower and Wheel HVAC blower motor is inoperative. Before replacing the blower motor please call one of these individuals:~ First call Brad Bartkowicz at cell (586) 808-4114~ If no answer, then call Vince Celli at cell (586) 630-8136~ If not response in 15 minutes, continue with repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
HVAC blower assembly Blower Motor either making noise or is inoperative (even intermittently). Before replacing any of the part numbers listed above, please call any of the following people for each vehicle type. (If you don't get an answer within 15 minutes,then proceed with the repair.):~ WD/WK--68224166AB - Front Ken Deneau, cell (248)-765-0288~ 68089094AA - Rear Pat Presti- cell (248) 379-0972~ KL/UF/PF- 68223053AB, 68225055AA Mark Ware, cell (248) 705-3469~ F500- 68093422AB,Matt Sasina, cell (248)-464-4982 or Bryan Bremer cell (248) 429-9014~ RT- 68029719AB - Front, Matt Filipkowski cell (248) 877-9106~ 05183147AA - Rear, Ken Deneau, cell (248)-765-0288
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tire pressure monitoring module Prior to replacing tire pressure monitoring module, for DTC's C151D, C1581, please contact Michael Wang at cell (248) 701-5351. If no response or contact is made within 15 minutes, proceed with repairs as necessary.
Source components: TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Shifter - Automatic Trans Before this part is replaced for any issue please call John Grzecki on cell (248) 379- 0969. If you do not receive a return call within 15 minutes, proceed with the repair. Please be sure to accurately record any DTCs identified with the scan tool and document them on the repair order.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Fuel tank Before replacing this part, please call Keith Kerby on his Cell (248) 420-5540 OR Manuel Gandara on cell (248) 622 8109 ~ Mexican Dealers please call Ricardo Lozada at cell +52 1 55 1370 3187. If no return call in 15 minutes, continue with repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Headlamp Assembly If the headlamp assembly is being replaced, please also replace the harness attached to the headlamp. Engineering would like to have both parts returned for analysis. Also, please take a picture of the parts and email the picture, a short discription of the issue, and the last 8 digits of the VIN to Brigitte.Wicks@fcagroup.com. Thank you.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Compressor HVAC compressor is inoperative. Before replacing the compressor call FCA Release Engineer Mark Briolat at cell (248) 345-0127. If no response in 15 minutes, continue with the repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Power Transfer Unit Prior to replacing the PTU, please review the following .~ Check if the service 4WD light is intermittent by driving under heavy throttle will produce a C1494-92 DTC, if yes, please call FCA axle engineering and do not replace the PTU. Bruce Michel at cell (248) 260-8641, or Jian Zhu at cell (248) 379- 1132. If neither answers with 15 minutes then proceed with the repair. ~ If the service 4WD light lamp is on steady then replace the Power Transfer Unit.
Source components: POWER TRAIN · POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Camshaft Position Sensor If replacing a camshaft position sensor for P0340 and/or P0344 fault codes, please review information below and contact Andrew Action on his cell phone: (248) 421- 4130. If no response is received within 15 minutes, please continue with repair.~ Before clearing any codes please pull Freeze Frame and CamCrank Sync Event Monitor data (instructions below) from the PCM and send the PDF?s to Andrew Acton by email: andrew.acton@fcagroup.com~ Instructions to access CamCrank Sync Event Monitor:~ - From wiTECH main screen~ - Monitors tab~ - OBDII Monitors~ - Select Cam Crank Synchronization Event Monitor from the list~ - Should bring up 3 or 4 pages of data~ - Click on create PDF icon in lower right corner~ - email PDF to andrew.acton@fcagroup.com
NHTSA source summary · Original PDF not reviewed by Recallfolio
Crankshaft Position Sensor Before replacing this part due to a P0335 fault code, please contact Andrew Acton at cell (248) 421-4130. Engineering is interested in the condition(s) present when the fault occurs.~ If no response is received within 15 minutes, then continue with repair.~ If possible, please send Freeze Frame data and Mark Sync Event data to andrew.acton@fcagroup.com~ To Retrieve Marks Data on WiTech:~ 1) Choose ?Monitors? and select ?OBDII Monitors? from the drop down box.~ 2) At the next Screen, choose ?Cam Crank Synchronization Monitor?.~ 3) Once you select the Cam Crank Synchronization event Monitor, you will get to the three pages of Marks Event Data.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Cruise Control Switch Before ordering or replacing this part please contact Dennis Gauthier at cell (248) 613-9756. If no response is received within 15 minutes, then proceed with required repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Battery Please call Bob Horn at cell (248) 231-3315 prior to replacing any battery. Please identify battery with the last 8 VIN digits along with the 15 digit Medtronic code from the GR-8 tester. If no response in 15 minutes, continue with the repair. Battery needs to be held and not turned in for core charges.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Bumper Step Pad Customer may notice the center section of the step pad is not sitting flat. It will appear raised either left or right of center. Please photograph the condition, measure the gap between the bumper and step pad. Then contact Jim Allie via Cell Phone (248) 736-5349 with this information. We may want to have the whole bumper assembly returned for study. ~ If the dealership is within the Metro Detroit Area, Jim would like to analyze the vehicle in person prior to repair. ~ If the dealership is not close, please take pictures and a detailed description of what is causing the issue including where on the Step Pad the issue is occurring. If Jim does not return the call within 15 minutes please gather the requested information and proceed with the repair. Information can be emailed to james.allie@fcagroup.com
NHTSA source summary · Original PDF not reviewed by Recallfolio
Radiator If vehicle comes in for transmission fluid leaking from trans-oil cooler fittings on the radiator, please check the following before replacing the radiator/cooler:~ 1. Remove both of the transmission lines from the cooler?s top/bottom flared fittings on the radiator. ~ 2. Loosen the hex nut on the top flared fitting on the radiator tank.~ 3. Torque the top flared fitting to 235 +/- 15 Lb-In.~ 4. Torque hex nut to 100 +/- 10 Lb-In.~ 5. Repeat for bottom flared fitting.~ 6. Reinstall transmission line per normal installation procedures and ensure correct fluid level.~ ~ If vehicle is in need of a new radiator for another reason, check the new radiator for correct torque on the trans-oil cooler fitting per steps 2-5 above.~ ~ If radiator has a yellow mark by the trans-oil cooler fittings the torque does not have to be checked.
Source components: ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Pump - Power Steering Hydraulic NOTE: This Tech Tip is for gasoline engine JK vehicles only, manufactured before August 26, 2015. If the power steering pump is being replaced because the power steering fluid flow or pressure readings are below specification, the power steering fluid reservoir and cap assembly should also be replaced. Power steering reservoir and cap assembly 52126151AG or later should be used.
Source components: STEERING · STEERING:ELECTRIC POWER ASSIST SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Camshaft Position Sensor If replacing a camshaft position sensor for P0340, P0344, P0345, P0349, P0365, P0369, P0390 or P0394 fault codes, please review information below and contact Tom Nies on his cell phone: (248) 494-0187. If no response is received within 15 minutes, please continue with repair. Before clearing any codes, please pull Freeze Frame and CamCrank Sync Event Monitor data (instructions below) from the PCM and send the PDF?s to Tom Nies by email: tom.nies@fcagroup.com~ Instructions to access Cam/Crank Sync Event Monitor: - From wiTECH main screen - Monitors tab - OBDII Monitors - Select Cam Crank Synchronization Event Monitor from the list - Should bring up 3 or 4 pages of data - Click on create PDF icon in lower right corner - email PDF to tom.nies@fcagroup.com
NHTSA source summary · Original PDF not reviewed by Recallfolio
Evaporative System Integrity Monitor switch (ESIM) Prior to replacing this component on a 2015 Dodge Journey (JC), please call Bob Bruni at cell (248) 736-8958. If a response is not received within 15 minutes, then continue with the necessary repair.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM · EQUIPMENT.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Element Assy- Heated Seat If any of the Front Heated Seats are Inoperable. Call Mike Wicker at cell (248) 821- 9350 with the Fault Code, so we can determine true root cause. If your call is not returned within 15 minutes, please continue with the repair
NHTSA source summary · Original PDF not reviewed by Recallfolio
Seat belt retractor - rear seat center Prior to ordering this part, call Gary Gebski at (248) 807-5874. If no response in 15 minutes, proceed with ordering the part
NHTSA source summary · Original PDF not reviewed by Recallfolio
Emission Recall R41 (STOP SALE) ? Tailpipe Emission Non-Compliance Fiat Chrysler Automobiles (FCA US LLC) has determined that some 2014 and 2015 RAM ProMaster Chassis Cab and Cutaway models with a 3.0L (sales code EXG) Diesel Engine built between August 15, 2013 and July 15, 2015 (MDH 081510 through 071512) are non-compliant with U.S. Environmental Protection Agency (EPA) and California Air Resources Board (CARB) emission requirements. FCA US LLC is currently evaluating the situation and the various options to resolution. Until then, these vehicles are prohibited from entering commerce. Dealers will be notified by way of established communication methods as to the direction that will be taken. Important: All involved in-stock vehicles are under a ?STOP SALE ORDER? and cannot be sold. Civil penalties could be imposed for delivering a non-compliant vehicle. We ask that you please take the time to ensure that your personnel are aware of this communication and are prepared to execute a customer friendly process to address inquiries on involved vehicles.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
RA2 Radio Software Enhancements This bulletin involves updating the radio's software. The customer may experience one or more of the following: ? Radio display screen blank. ? Navigation may be inoperative. ? Radio may be inoperative.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Emissions Recall R02 VECI Label A non-applicable Vehicle Emission Control Information (VECI) label was inadvertently installed on about 4,000 of the above vehicles. The VECI label on complete vehicles (also known as without cab chassis) with a 3.0L diesel engine incorrectly states that the vehicle does not have Onboard Diagnostics (OBD). The VECI labels on incomplete vehicles (also known as cab chassis) equipped with either a 3.6L gasoline engine or a 3.0L diesel engine indicate an incorrect maximum curb weight. A new VECI label must be installed over the vehicle?s original VECI label.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Roof Clearance Lamp Has Moisture Inside This bulletin involves inspecting the cab roof clearance lamps for moisture inside the lamp. The customer may describe moisture inside the front cab roof clearance lamp.
Source components: INTERIOR LIGHTING · STRUCTURE:BODY:ROOF AND PILLARS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Front Brake Squeak/Squeal Noise This bulletin involves replacing the front brake pads and related hardware. The customer may describe a front brake squeak/squeal noise when applying the brakes.
Source components: SERVICE BRAKES · SERVICE BRAKES, HYDRAULIC.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 3.6L Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. The following PCM software improvements are available. ? Software to improve vacuum sensor diagnosis for the Hydraulic Booster Compensation (HBC) feature in the Electronic Suspension Control (ESC) module. ? Software to enable vehicle max speed programming using WiTECH.
Source components: ELECTRICAL SYSTEM · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM) · SUSPENSION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
RAM: MALFUNCTION INDICATOR LAMP (MIL) IS ILLUMINATING DUE TO SEVERAL DIAGNOSIC TROUBLE CODES (DTCS) AND PROCEDURE PROVIDED FOR REPROGRAMMING TRANSMISSION CONTROL MODULE WITH THE NEWEST SOFTWARE *CN
Source components: ELECTRICAL SYSTEM:SOFTWARE · POWER TRAIN:AUTOMATIC TRANSMISSION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 3.0L Diagnostic And System Improvements This bulletin involves reprogramming the Engine Control Module (ECM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) Illumination. Upon further investigation a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) stored in the ECM memory. ? P00AF-00 - Turbocharger Boost Control Module A Performance. ? P226C-00 - Turbocharger Boost Control Slow Response. ? P2458-00 - Diesel Particulate Filter Regeneration Duration. ? P2459-00 - Diesel Particulate Filter Regeneration Frequency. ? P2463-00 - Diesel Particulate Filter - Soot Accumulation. ? P22FA-00 - NOx Sensor Performance Slow Response High to Low Bank 1 Sensor 1. ? P203B-00 - Reductant Level Sensor 1 Circuit Performance. ? P203E-00 - Reductant Level Sensor 1 Circuit Intermittent-Erratic. ? P0401-00 - EGR System Performance. ? P0402-00 - Exhaust Gas Recirculation Flow Excessive Detected. ? P04FB-00 - Crankcase Ventilation Hose Connection Sensor Range/Performance. ? P04E2-00 - Crankcase Ventilation Hose Connection Sensor Circuit Low. ? P051B-00 - Crankcase Pressure Sensor Circuit Range/Performance. ? P051C-00 - Crankcase Pressure Sensor Circuit Low. ? P051D-00 - Crankcase Pressure Sensor Circuit High. ? P04DB-00 - Crankcase Ventilation System Disconnected. ? P04FC-00 - Crankcase Ventilation System Performance. ? P011B-00 - Engine Coolant Temperature / Intake Air Temperature Correlation. ? P04D9-00 - Closed Loop EGR Control At Limit Flow Too Low. ? P250A-00 - Low Oil Pressure Active ? P04DA-00 - Closed Loop EGR Control At Limit Flow Too High. In addition, this system enhancement will improve the detection capability for "Insufficient Diesel Exhaust Fluid (DEF) Quality" as well as corrects a condition where incorrect Glow Plugs were being identified when Glow Plug DTCs were set for cylinders 2, 3, and 4.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Squeak Noise From Spare Tire Winch This bulletin involves inspecting the tire winch for proper operation and applying lube. The customer may experience one or both of the following conditions: ? Squeak noise in the rear of the vehicle. ? Unable to lower or raise the spare tire.
Source components: BACK OVER PREVENTION · EQUIPMENT.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Squeak Noise From Spare Tire Winch This bulletin involves inspecting the tire winch for proper operation and applying lube. The customer may experience one or both of the following conditions: ? Squeak noise in the rear of the vehicle. ? Unable to lower or raise the spare tire.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Squeak Noise From Spare Tire Winch This bulletin involves inspecting the tire winch for proper operation and applying lube. The customer may experience one or both of the following conditions: ? Squeak noise in the rear of the vehicle. ? Unable to lower or raise the spare tire.
Source components: BACK OVER PREVENTION · EQUIPMENT.
NHTSA source summary · Original PDF not reviewed by Recallfolio
STAR receives on average 1,000 contacts per day ? that?s 300,000 annual contacts for technical assistance. This same month last year we had over 40,000 open aged > 5 days tickets. As a result of focused efforts to verify vehicles are repaired and close tickets the number is now at just under 7,000 tickets.
NHTSA source summary · Original PDF not reviewed by Recallfolio
82212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~