The manufacturer’s record · Page 1 of 4
Original record summaries, dates and identifiers for this model-year. Records 1–100 of 374, ordered newest first. Dated records on this page: Jun 30, 2020–Jun 12, 2026.
Back to 2014 Ram PROMASTER problems & recallsThis archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
NHTSA communication ID: 11033975
NHTSA source summary · Original PDF not reviewed by Recallfolio
Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
Source components: ELECTRICAL SYSTEM · STRUCTURE:BODY.
Source record 11033975 at NHTSANHTSA communication ID: 11033897
NHTSA source summary · Original PDF not reviewed by Recallfolio
Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
Source components: STRUCTURE:BODY.
Source record 11033897 at NHTSANHTSA communication ID: 11033308
NHTSA source summary · Original PDF not reviewed by Recallfolio
Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
Source components: ELECTRICAL SYSTEM · STRUCTURE:BODY.
Source record 11033308 at NHTSANHTSA communication ID: 11031241
NHTSA source summary · Original PDF not reviewed by Recallfolio
Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
Source components: STRUCTURE:BODY.
Source record 11031241 at NHTSANHTSA communication ID: 11027731
NHTSA source summary · Original PDF not reviewed by Recallfolio
STARTER - ENGINE
Source components: ELECTRICAL SYSTEM · ENGINE.
Source record 11027731 at NHTSANHTSA communication ID: 11027654
NHTSA source summary · Original PDF not reviewed by Recallfolio
STARTER - ENGINE
Source components: ENGINE.
Source record 11027654 at NHTSANHTSA communication ID: 11022027
NHTSA source summary · Original PDF not reviewed by Recallfolio
Verify Reman part number availability. Order the "R" part number for all orders: Warranty, Mopar, customer pay and service contract. Order "68" part number for New unsold units only.
Source components: UNKNOWN OR OTHER.
Source record 11022027 at NHTSANHTSA communication ID: 11022026
NHTSA source summary · Original PDF not reviewed by Recallfolio
Verify Reman part number availability. Order the "R" part number for all orders: Warranty, Mopar, customer pay and service contract. Order "68" part number for New unsold units only.
Source components: UNKNOWN OR OTHER.
Source record 11022026 at NHTSANHTSA communication ID: 11017399
NHTSA source summary · Original PDF not reviewed by Recallfolio
Malfunction Indicator Lamp (MIL) Illuminated. Diagnostic Trouble Codes (DTCs) P22A1 – NOx Sensor Circuit High, Bank 1 Sensor 2, and P20EE – NOx Catalyst Efficiency Below Threshold, Setting.
Source components: UNKNOWN OR OTHER.
Source record 11017399 at NHTSANHTSA communication ID: 11017445
NHTSA source summary · Original PDF not reviewed by Recallfolio
ACTUATOR - A/C AND HEATER
Source components: UNKNOWN OR OTHER.
Source record 11017445 at NHTSANHTSA communication ID: 11017435
NHTSA source summary · Original PDF not reviewed by Recallfolio
ACTUATOR - A/C AND HEATER
Source components: UNKNOWN OR OTHER.
Source record 11017435 at NHTSANHTSA communication ID: 11016138
NHTSA source summary · Original PDF not reviewed by Recallfolio
STARTER - ENGINE
Source components: ENGINE.
Source record 11016138 at NHTSANHTSA communication ID: 11011762
NHTSA source summary · Original PDF not reviewed by Recallfolio
TRANSMISSION KIT With Torque Converter 62TE Transmission Mounting Kit, for replacing the existing transmission assembly for Part numbers R8210327A$, the mounting kit must be used and bolts and bracket must be replaced. The mounting kit is to be included within the reman transmission kit package P/Ns R8210327A$. Mounting kit p/n to be used : P/N 68501446AA
Source components: POWER TRAIN.
Source record 11011762 at NHTSANHTSA communication ID: 11008146
NHTSA source summary · Original PDF not reviewed by Recallfolio
Malfunction Indicator Lamp (MIL) Illumination. Diagnostic Trouble Codes (DTCs) U37B8-No Description Available, And P20EE-SCR NOx Catalyst Efficiency Below Threshold, Set.
Source components: POWER TRAIN.
Source record 11008146 at NHTSANHTSA communication ID: 11001592
NHTSA source summary · Original PDF not reviewed by Recallfolio
Low Pressure Power Steering Line Servicing For Leak Concerns.
Source components: STEERING.
Source record 11001592 at NHTSANHTSA communication ID: 11001760
NHTSA source summary · Original PDF not reviewed by Recallfolio
PAD KIT - FRONT DISC BRAKE
Source components: SERVICE BRAKES.
Source record 11001760 at NHTSANHTSA communication ID: 10251783
NHTSA source summary · Original PDF not reviewed by Recallfolio
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY.
Source record 10251783 at NHTSANHTSA communication ID: 10248893
NHTSA source summary · Original PDF not reviewed by Recallfolio
Updated Diagnostic Trouble Code (DTC) P2BA9 ? Insufficient Reductant Quality, ?Service Diesel Exhaust Fluid (DEF) System? Message Reset Procedure.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM · FUEL SYSTEM, DIESEL.
Source record 10248893 at NHTSANHTSA communication ID: 10248517
NHTSA source summary · Original PDF not reviewed by Recallfolio
LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
Source components: EQUIPMENT.
Source record 10248517 at NHTSANHTSA communication ID: 10244356
NHTSA source summary · Original PDF not reviewed by Recallfolio
LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
Source components: SUSPENSION.
Source record 10244356 at NHTSANHTSA communication ID: 10248509
NHTSA source summary · Original PDF not reviewed by Recallfolio
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
Source components: ELECTRICAL SYSTEM.
Source record 10248509 at NHTSANHTSA communication ID: 10244348
NHTSA source summary · Original PDF not reviewed by Recallfolio
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
Source components: ELECTRICAL SYSTEM:WIRING.
Source record 10244348 at NHTSANHTSA communication ID: 10243209
NHTSA source summary · Original PDF not reviewed by Recallfolio
FCA Caribbean Warranty Bulletin ID-23-20 "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10243209 at NHTSANHTSA communication ID: 10243208
NHTSA source summary · Original PDF not reviewed by Recallfolio
Warranty Bulletin D-16-03 - "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC (Rev. B)
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10243208 at NHTSANHTSA communication ID: 10243099
NHTSA source summary · Original PDF not reviewed by Recallfolio
FLOOR FRONT CARPET As of August 16, 2023, the front carpet is no longer standard, claims for shortages and errors will be denied.
Source components: STRUCTURE.
Source record 10243099 at NHTSANHTSA communication ID: 10243259
NHTSA source summary · Original PDF not reviewed by Recallfolio
3.0L Diesel Emissions Warranty Extension XB0 Possible Malfunction Indicator Lamp (MIL) illumination after installation of updated engine calibrations.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL · FUEL SYSTEM, DIESEL.
Source record 10243259 at NHTSANHTSA communication ID: 10243205
NHTSA source summary · Original PDF not reviewed by Recallfolio
FCA Caribbean Warranty Bulletin ID-23-19, (XB0) Emission Control System Components - Select 2014-2016 RAM Promaster (VF)
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL.
Source record 10243205 at NHTSANHTSA communication ID: 10243204
NHTSA source summary · Original PDF not reviewed by Recallfolio
Warranty Bulletin D-23-16, (XB0) Emission Control System Components - Select 2014-2016 RAM Promaster (VF)
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL.
Source record 10243204 at NHTSANHTSA communication ID: 10243214
NHTSA source summary · Original PDF not reviewed by Recallfolio
Emissions Recall ZC0 - 3.0L Diesel Emissions
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL · FUEL SYSTEM, DIESEL.
Source record 10243214 at NHTSANHTSA communication ID: 10243213
NHTSA source summary · Original PDF not reviewed by Recallfolio
Emissions Recall V97 - 3.0L Diesel Emissions
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL · FUEL SYSTEM, DIESEL.
Source record 10243213 at NHTSANHTSA communication ID: 10242717
NHTSA source summary · Original PDF not reviewed by Recallfolio
Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10242717 at NHTSANHTSA communication ID: 10239957
NHTSA source summary · Original PDF not reviewed by Recallfolio
Water Quality When Mixed With Engine Coolant
Source components: ENGINE AND ENGINE COOLING.
Source record 10239957 at NHTSANHTSA communication ID: 10239942
NHTSA source summary · Original PDF not reviewed by Recallfolio
Check Strap Webbing Kit on Driver?s Side Front Door The repair eliminates the over swing when opening the driver?s side door. This bulletin involves installing a webbing kit on the front left driver?s door for the door check strap.
Source components: STRUCTURE:BODY:DOOR.
Source record 10239942 at NHTSANHTSA communication ID: 10236933
NHTSA source summary · Original PDF not reviewed by Recallfolio
wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.
Source record 10236933 at NHTSANHTSA communication ID: 10247906
NHTSA source summary · Original PDF not reviewed by Recallfolio
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
Source components: ENGINE AND ENGINE COOLING.
Source record 10247906 at NHTSANHTSA communication ID: 10234379
NHTSA source summary · Original PDF not reviewed by Recallfolio
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
Source components: ENGINE AND ENGINE COOLING.
Source record 10234379 at NHTSANHTSA communication ID: 10247905
NHTSA source summary · Original PDF not reviewed by Recallfolio
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
Source components: BACK OVER PREVENTION.
Source record 10247905 at NHTSANHTSA communication ID: 10234420
NHTSA source summary · Original PDF not reviewed by Recallfolio
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
Source components: ELECTRICAL SYSTEM.
Source record 10234420 at NHTSANHTSA communication ID: 10234378
NHTSA source summary · Original PDF not reviewed by Recallfolio
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
Source components: ENGINE AND ENGINE COOLING.
Source record 10234378 at NHTSANHTSA communication ID: 10231681
NHTSA source summary · Original PDF not reviewed by Recallfolio
D-Pillar Upper LT,D-Pillar Upper RT,Plug Retractor C-Pillar Plasti Beginning 2023 Model Year the D-Pillar Trims are no longer included in the original vehicle build. Warranty claims for shortage and error will be subject to change back.
Source components: STRUCTURE:BODY:ROOF AND PILLARS.
Source record 10231681 at NHTSANHTSA communication ID: 10229806
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Heating, Ventilation and Air Conditioning (HVAC) Module Updates This bulletin involves reprogramming the HVAC control module with the latest available software. The customer may experience a Malfunction Indicator Lamp (MIL) illumination with one or more of the following Diagnostic Trouble Codes (DTCs) or the symptom/conditions listed below: ? U1710-86 - Implausible Data Received From HVAC. ? U1710-87 - ACM (Automatic Climate Module) On B CAN - Missing Message. ? The HVAC control for the air conditioning/heating outlet control, fan speed or other controls maybe inoperative after a Body Control Module (BCM) had been replaced. ? The rear defrost/heated mirror LED indicator on the HVAC controller does not illuminate when the button is depressed (2014 MY only).
Source components: ELECTRICAL SYSTEM · EXTERIOR LIGHTING · PARKING BRAKE · STRUCTURE · VISIBILITY.
Source record 10229806 at NHTSANHTSA communication ID: 10229572
NHTSA source summary · Original PDF not reviewed by Recallfolio
Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
Source components: STRUCTURE.
Source record 10229572 at NHTSANHTSA communication ID: 10225424
NHTSA source summary · Original PDF not reviewed by Recallfolio
Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
Source components: STRUCTURE.
Source record 10225424 at NHTSANHTSA communication ID: 10225287
NHTSA source summary · Original PDF not reviewed by Recallfolio
Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
Source components: STRUCTURE · STRUCTURE:INTERIOR PANELS:DOOR · UNKNOWN OR OTHER.
Source record 10225287 at NHTSANHTSA communication ID: 10221379
NHTSA source summary · Original PDF not reviewed by Recallfolio
CHECK, Front Door When servicing the Check strap or hinge please follow TSB 23-019-22 to protect against additional component failure.
Source components: STRUCTURE:BODY:DOOR.
Source record 10221379 at NHTSANHTSA communication ID: 10214627
NHTSA source summary · Original PDF not reviewed by Recallfolio
Check Strap Webbing Kit on Driver?s Side Front Door This bulletin involves installing a webbing kit on the front left driver?s door for the door check strap. The repair eliminates the over swing when opening the driver?s side door.
Source components: EQUIPMENT · SEAT BELTS:FRONT:WEBBING · STRUCTURE:BODY:DOOR.
Source record 10214627 at NHTSANHTSA communication ID: 10227983
NHTSA source summary · Original PDF not reviewed by Recallfolio
If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.
Source record 10227983 at NHTSANHTSA communication ID: 10228977
NHTSA source summary · Original PDF not reviewed by Recallfolio
SHAFT, Axle Half (Right/Left) There is a Boot Repair Kit available for this half shaft. Please review TSB 03-002-22 for information on the Boot Repair Kit.
Source components: EQUIPMENT.
Source record 10228977 at NHTSANHTSA communication ID: 10223016
NHTSA source summary · Original PDF not reviewed by Recallfolio
SHAFT, Axle Half (Right/Left) There is a Boot Repair Kit available for this half shaft. Please review TSB 03-002-22 for information on the Boot Repair Kit.
Source components: POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT.
Source record 10223016 at NHTSANHTSA communication ID: 10220633
NHTSA source summary · Original PDF not reviewed by Recallfolio
SHAFT, Axle Half (Right/Left) There is a Boot Repair Kit available for this half shaft. Please review TSB 03-002-22 for information on the Boot Repair Kit.
Source components: EQUIPMENT.
Source record 10220633 at NHTSANHTSA communication ID: 10212236
NHTSA source summary · Original PDF not reviewed by Recallfolio
SHAFT, Axle Half (Right/Left) There is a Boot Repair Kit available for this half shaft. Please review TSB 03-002-22 for information on the Boot Repair Kit.
Source components: POWER TRAIN:AXLE ASSEMBLY.
Source record 10212236 at NHTSANHTSA communication ID: 10229112
NHTSA source summary · Original PDF not reviewed by Recallfolio
Outer Half Shaft Boot Replacement
Source components: POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT.
Source record 10229112 at NHTSANHTSA communication ID: 10223150
NHTSA source summary · Original PDF not reviewed by Recallfolio
Outer Half Shaft Boot Replacement
Source components: EQUIPMENT.
Source record 10223150 at NHTSANHTSA communication ID: 10220768
NHTSA source summary · Original PDF not reviewed by Recallfolio
Outer Half Shaft Boot Replacement
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:SHAFT:OUTPUT.
Source record 10220768 at NHTSANHTSA communication ID: 10212371
NHTSA source summary · Original PDF not reviewed by Recallfolio
Outer Half Shaft Boot Replacement
Source components: ENGINE · EQUIPMENT.
Source record 10212371 at NHTSANHTSA communication ID: 10218450
NHTSA source summary · Original PDF not reviewed by Recallfolio
Transmission,Trans Oil Pump,Torque Converter, Flexplate, Rear Seal, Engine NOTE: FOR ALL PROMASTER (VF) 3.6L/62TE EQUIPPED VEHICLES: IF THE TRANSMISSION BRACKET TO THE TRANSMISSION CASE FASTENERS ARE REMOVED DURING SERVICING, THE FASTENERS (Part Number 06511385A$) ARE ONE TIME USEAGE, AND MUST BE REPLACED, AND PROPERLY TORQUED TO 105 NM. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA or 68501446AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA, & Fastener Service Kit PN 68329056AA. Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA or 68501448AA For vehicle noise and flex plate found broken on vehicles > 50K miles. 1)Verify and Take pictures of the Trans/engine dowel pin holes, to see if the holes on trans bell housing are oblong, send pictures to FCA Redacted Content. 2) Call FCA Redacted Content, if no oblong holes are found to arrange trans swap and fast track the trans back to QEC. If vehicle won?t move and has noise/leaking from transmission bell housing area, check transmission pump bushing. If pump bushing is scored or damaged, replace the pump assembly as opposed to transmission. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. When replacing the long block engine, the VVT Actuator's PN 05184101A* must also be replaced. Engineering is requesting additional information when the long block engine is replaced due to thrust washer failures. Contact FCA Redacted Content.
Source components: BACK OVER PREVENTION · FUEL SYSTEM, GASOLINE · POWER TRAIN · SUSPENSION.
Source record 10218450 at NHTSANHTSA communication ID: 10219965
NHTSA source summary · Original PDF not reviewed by Recallfolio
Key Cannot Be Removed From Ignition, Or No Start concerns
Source components: ELECTRICAL SYSTEM:IGNITION:SWITCH.
Source record 10219965 at NHTSANHTSA communication ID: 10218505
NHTSA source summary · Original PDF not reviewed by Recallfolio
Key Cannot Be Removed From Ignition, Or No Start concerns
Source components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER.
Source record 10218505 at NHTSANHTSA communication ID: 10230180
NHTSA source summary · Original PDF not reviewed by Recallfolio
Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
Source components: ENGINE AND ENGINE COOLING.
Source record 10230180 at NHTSANHTSA communication ID: 10221594
NHTSA source summary · Original PDF not reviewed by Recallfolio
Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
Source components: ENGINE AND ENGINE COOLING.
Source record 10221594 at NHTSANHTSA communication ID: 10221231
NHTSA source summary · Original PDF not reviewed by Recallfolio
PLATE, TORQUE CONVERTER DRIVE For 3.6L with 62TE NOTE: FOR ALL PROMASTER (VF) 3.6L/62TE EQUIPPED VEHICLES: IF THE TRANSMISSION BRACKET TO THE TRANSMISSION CASE FASTENERS ARE REMOVED DURING SERVICING, THE FASTENERS (Part Number 06511385A$) ARE ONE TIME USEAGE & MUST BE REPLACED & PROPERLY TORQUED TO 105NM Replace the eight bolts (8) 06503465 drive plate to crank shaft and the four TC bolts 06504383 as they have sealants Vehicle miles < 30K: Mandatory replacement of transmission and driveplate Vehicle miles > 30K: Replace driveplate only (shot peened)
Source components: POWER TRAIN.
Source record 10221231 at NHTSANHTSA communication ID: 10221230
NHTSA source summary · Original PDF not reviewed by Recallfolio
Transmission,Trans Oil Pump,Torque Converter, Flexplate, Rear Seal, Engine NOTE: FOR ALL PROMASTER (VF) 3.6L/62TE EQUIPPED VEHICLES: IF THE TRANSMISSION BRACKET TO THE TRANSMISSION CASE FASTENERS ARE REMOVED DURING SERVICING, THE FASTENERS (Part Number 06511385A$) ARE ONE TIME USEAGE, AND MUST BE REPLACED, AND PROPERLY TORQUED TO 105 NM. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA, Fastener Service Kit PN 68329056AA. Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA For vehicle noise and flex plate found broken on vehicles > 50K miles. 1)Verify and Take pictures of the Trans/engine dowel pin holes, to see if the holes on trans bell housing are oblong, send pictures toFCA Redacted Content. 2) Call FCA Redacted Content, if no oblong holes are found to arrange trans swap and fast track the trans back to QEC. If vehicle won?t move and has noise/leaking from transmission bell housing area, check transmission pump bushing. If pump bushing is scored or damaged, replace the pump assembly as opposed to transmission. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. When replacing the long block engine, the VVT Actuator's PN 05184101A* must also be replaced. Engineering is requesting additional information when the long block engine is replaced due to thrust washer failures. Contact FCA Redacted Content.
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN.
Source record 10221230 at NHTSANHTSA communication ID: 10212513
NHTSA source summary · Original PDF not reviewed by Recallfolio
PLATE, TORQUE CONVERTER DRIVE For 3.6L with 62TE NOTE: FOR ALL PROMASTER VF 3.6L/62TE EQUIPPED VEHICLES: IF THE TRANSMISSION BRACKET TO THE TRANSMISSION CASE FASTENERS ARE REMOVED DURING SERVICING, THE FASTENERS Part Number 06511385A$ ARE ONE TIME USEAGE & MUST BE REPLACED & PROPERLY TORQUED TO 105NM Replace the eight bolts 8 06503465 drive plate to crank shaft and the four TC bolts 06504383 as they have sealants Vehicle miles < 30K: Mandatory replacement of transmission and driveplate Vehicle miles > 30K: Replace driveplate only shot peened
Source components: EQUIPMENT · POWER TRAIN.
Source record 10212513 at NHTSANHTSA communication ID: 10221228
NHTSA source summary · Original PDF not reviewed by Recallfolio
WIRING, Body Before replacing this harness, please contact FCA Redacted Content to see if a repair kit is available for your application. If no response in 15 minutes, proceed with repair. Please email pictures of harness defects to FCA Redacted Content
Source components: ELECTRICAL SYSTEM:WIRING.
Source record 10221228 at NHTSANHTSA communication ID: 10230068
NHTSA source summary · Original PDF not reviewed by Recallfolio
Wind Or Whistle Noise From Windshield
Source components: BACK OVER PREVENTION.
Source record 10230068 at NHTSANHTSA communication ID: 10223456
NHTSA source summary · Original PDF not reviewed by Recallfolio
Wind Or Whistle Noise From Windshield
Source components: VISIBILITY:WINDSHIELD.
Source record 10223456 at NHTSANHTSA communication ID: 10223296
NHTSA source summary · Original PDF not reviewed by Recallfolio
Wind Or Whistle Noise From Windshield
Source components: BACK OVER PREVENTION.
Source record 10223296 at NHTSANHTSA communication ID: 10198390
NHTSA source summary · Original PDF not reviewed by Recallfolio
Wind Or Whistle Noise From Windshield
Source components: VISIBILITY.
Source record 10198390 at NHTSANHTSA communication ID: 10230053
NHTSA source summary · Original PDF not reviewed by Recallfolio
Outside Power Folding Mirror Shakes Vibrates Or Is Loose
Source components: POWER TRAIN · VISIBILITY.
Source record 10230053 at NHTSANHTSA communication ID: 10223441
NHTSA source summary · Original PDF not reviewed by Recallfolio
Outside Power Folding Mirror Shakes Vibrates Or Is Loose
Source components: VISIBILITY · VISIBILITY:REARVIEW MIRRORS/DEVICES.
Source record 10223441 at NHTSANHTSA communication ID: 10223281
NHTSA source summary · Original PDF not reviewed by Recallfolio
Outside Power Folding Mirror Shakes Vibrates Or Is Loose
Source components: POWER TRAIN · VISIBILITY.
Source record 10223281 at NHTSANHTSA communication ID: 10198375
NHTSA source summary · Original PDF not reviewed by Recallfolio
Outside Power Folding Mirror Shakes Vibrates Or Is Loose
Source components: VISIBILITY.
Source record 10198375 at NHTSANHTSA communication ID: 10230029
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customer Complaint May Include Engine Oil Leak Or Consumption
Source components: ENGINE.
Source record 10230029 at NHTSANHTSA communication ID: 10223417
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customer Complaint May Include Engine Oil Leak Or Consumption
Source components: ENGINE AND ENGINE COOLING.
Source record 10223417 at NHTSANHTSA communication ID: 10223257
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customer Complaint May Include Engine Oil Leak Or Consumption
Source components: ENGINE.
Source record 10223257 at NHTSANHTSA communication ID: 10198351
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customer Complaint May Include Engine Oil Leak Or Consumption
Source components: ENGINE AND ENGINE COOLING.
Source record 10198351 at NHTSANHTSA communication ID: 10221150
NHTSA source summary · Original PDF not reviewed by Recallfolio
Gear Ratio DTC?s, Transmission Shift Concerns, Does Not Shift At Times, Shudders
Source components: POWER TRAIN.
Source record 10221150 at NHTSANHTSA communication ID: 10221097
NHTSA source summary · Original PDF not reviewed by Recallfolio
Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
Source components: POWER TRAIN.
Source record 10221097 at NHTSANHTSA communication ID: 10221096
NHTSA source summary · Original PDF not reviewed by Recallfolio
Transmission,Trans Oil Pump,Torque Converter, Flexplate, Rear Seal, Engine NOTE: FOR ALL PROMASTER (VF) 3.6L/62TE EQUIPPED VEHICLES: IF THE TRANSMISSION BRACKET TO THE TRANSMISSION CASE FASTENERS ARE REMOVED DURING SERVICING, THE FASTENERS (Part Number 06511385A$) ARE ONE TIME USEAGE, AND MUST BE REPLACED, AND PROPERLY TORQUED TO 105 NM. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA, Fastener Service Kit PN 68329056AA. Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA For vehicle noise and flex plate found broken on vehicles > 50K miles. 1)Verify and Take pictures of the Trans/engine dowel pin holes, to see if the holes on trans bell housing are oblong, send pictures to FCA Redacted Content. 2) Call FCA Redacted Content, if no oblong holes are found to arrange trans swap and fast track the trans back to QEC. If vehicle won?t move and has noise/leaking from transmission bell housing area, check transmission pump bushing. If pump bushing is scored or damaged, replace the pump assembly as opposed to transmission. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. When replacing the long block engine, the VVT Actuator's PN 05184101A* must also be replaced. Engineering is requesting additional information when the long block engine is replaced due to thrust washer failures. Contact FCA Redacyed Content.
Source components: POWER TRAIN.
Source record 10221096 at NHTSANHTSA communication ID: 10193949
NHTSA source summary · Original PDF not reviewed by Recallfolio
Transmission,Trans Oil Pump,Torque Converter, Flexplate, Rear Seal, Engine NOTE: FOR ALL PROMASTER (VF) 3.6L/62TE EQUIPPED VEHICLES: IF THE TRANSMISSION BRACKET TO THE TRANSMISSION CASE FASTENERS ARE REMOVED DURING SERVICING, THE FASTENERS (Part Number 06511385A$) ARE ONE TIME USEAGE, AND MUST BE REPLACED, AND PROPERLY TORQUED TO 105 NM. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA, Fastener Service Kit PN 68329056AA. Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA For vehicle noise and flex plate found broken on vehicles > 50K miles. 1)Verify and Take pictures of the Trans/engine dowel pin holes, to see if the holes on trans bell housing are oblong, send pictures to FCA Redacted Content. 2) Call FCA Redacted Content, if no oblong holes are found to arrange trans swap and fast track the trans back to QEC. If vehicle won?t move and has noise/leaking from transmission bell housing area, check transmission pump bushing. If pump bushing is scored or damaged, replace the pump assembly as opposed to transmission. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. When replacing the long block engine, the VVT Actuator's PN 05184101A* must also be replaced. Engineering is requesting additional information when the long block engine is replaced due to thrust washer failures. Contact FCA Redacyed Content.
Source components: BACK OVER PREVENTION · FUEL SYSTEM, GASOLINE · POWER TRAIN · SUSPENSION.
Source record 10193949 at NHTSANHTSA communication ID: 10221123
NHTSA source summary · Original PDF not reviewed by Recallfolio
62TE 6-Speed Transmission Cracked Torque Converter (TC) Piston Repair Index, To Aid In Diagnosis And Repair
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN.
Source record 10221123 at NHTSANHTSA communication ID: 10193976
NHTSA source summary · Original PDF not reviewed by Recallfolio
62TE 6-Speed Transmission Cracked Torque Converter (TC) Piston Repair Index, To Aid In Diagnosis And Repair
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN.
Source record 10193976 at NHTSANHTSA communication ID: 10220839
NHTSA source summary · Original PDF not reviewed by Recallfolio
Transmission,Trans Oil Pump,Torque Converter, Flexplate, Rear Seal, Engine NOTE: FOR ALL PROMASTER (VF) 3.6L/62TE EQUIPPED VEHICLES: IF THE TRANSMISSION BRACKET TO THE TRANSMISSION CASE FASTENERS ARE REMOVED DURING SERVICING, THE FASTENERS (Part Number 06511385A$) ARE ONE TIME USEAGE, AND MUST BE REPLACED, AND PROPERLY TORQUED TO 105 NM. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA, Fastener Service Kit PN 68329056AA. Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA For vehicle noise and flex plate found broken on vehicles > 50K miles. 1)Verify and Take pictures of the Trans/engine dowel pin holes, to see if the holes on trans bell housing are oblong, send pictures to FCA Redacted Content. 2) Call FCA Redacted Content, if no oblong holes are found to arrange trans swap and fast track the trans back to QEC. If vehicle won?t move and has noise/leaking from transmission bell housing area, check transmission pump bushing. If pump bushing is scored or damaged, replace the pump assembly as opposed to transmission. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. When replacing the long block engine, the VVT Actuator's PN 05184101A* must also be replaced. Engineering is requesting additional information when the long block engine is replaced due to thrust washer failures. Contact FCA Redacted Content.
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN.
Source record 10220839 at NHTSANHTSA communication ID: 10190667
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customer complaint may include engine oil leak/consumption.
Source components: ENGINE AND ENGINE COOLING.
Source record 10190667 at NHTSANHTSA communication ID: 10190589
NHTSA source summary · Original PDF not reviewed by Recallfolio
ADAPTER, Engine Oil Filter (Pentastar V6) All vehicles equipped with a 3.2L or 3.6L except for model year 2014 vehicles with leak concern: 1) Ensure the Oil Filter Adapter (OFA) Cap O-ring is seated in the proper groove in the cap and not damaged or cut. 2) If replacing the (OFA) due to a leak detected between (OFA) and block. Ensure the torque on the 5 bolts are torqued to 12nm. If not record the actual values, torque to 12nm and contact the FCA employees listed below. 3) Remove the (OFA) and replace the O-ring and gaskets only (Kit #68191356A$), NOT THE OFA. 4) If oil was drained, add oil dye to ensure the leak is repaired. For model year 2014 vehicles replace the Oil Filter Adaptor. 5) When replacing PN's 68310865A$ & 68308741A$, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
Source components: ENGINE AND ENGINE COOLING.
Source record 10190589 at NHTSANHTSA communication ID: 10190587
NHTSA source summary · Original PDF not reviewed by Recallfolio
Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
Source components: POWER TRAIN.
Source record 10190587 at NHTSANHTSA communication ID: 10190586
NHTSA source summary · Original PDF not reviewed by Recallfolio
Transmission,Trans Oil Pump,Torque Converter, Flexplate, Rear Seal, Engine NOTE: FOR ALL PROMASTER (VF) 3.6L/62TE EQUIPPED VEHICLES: IF THE TRANSMISSION BRACKET TO THE TRANSMISSION CASE FASTENERS ARE REMOVED DURING SERVICING, THE FASTENERS (Part Number 06511385A$) ARE ONE TIME USEAGE, AND MUST BE REPLACED, AND PROPERLY TORQUED TO 105 NM. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA, Fastener Service Kit PN 68329056AA. Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA For vehicle noise and flex plate found broken on vehicles > 50K miles. 1)Verify and Take pictures of the Trans/engine dowel pin holes, to see if the holes on trans bell housing are oblong, send pictures to FCA Redacted Content. 2) Call FCA Redacted Content, if no oblong holes are found to arrange trans swap and fast track the trans back to QEC. If vehicle won?t move and has noise/leaking from transmission bell housing area, check transmission pump bushing. If pump bushing is scored or damaged, replace the pump assembly as opposed to transmission. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. When replacing the long block engine, the VVT Actuator's PN 05184101A* must also be replaced. Engineering is requesting additional information when the long block engine is replaced due to thrust washer failures. Contact FCA Redacted Content.
Source components: POWER TRAIN.
Source record 10190586 at NHTSANHTSA communication ID: 10220531
NHTSA source summary · Original PDF not reviewed by Recallfolio
Transmission And Transmission Bracket Service
Source components: POWER TRAIN.
Source record 10220531 at NHTSANHTSA communication ID: 10188735
NHTSA source summary · Original PDF not reviewed by Recallfolio
Transmission And Transmission Bracket Service
Source components: EQUIPMENT · POWER TRAIN.
Source record 10188735 at NHTSANHTSA communication ID: 10220590
NHTSA source summary · Original PDF not reviewed by Recallfolio
Split/Crack of Metal Body Side Door Check Strap This bulletin involves retrofitting the door check strap mounting on the body side. The customer may notice a metal split or crack on the body side on either the driver or passenger side of the door check strap area
Source components: STRUCTURE · STRUCTURE:BODY:DOOR.
Source record 10220590 at NHTSANHTSA communication ID: 10188794
NHTSA source summary · Original PDF not reviewed by Recallfolio
Split/Crack of Metal Body Side Door Check Strap This bulletin involves retrofitting the door check strap mounting on the body side. The customer may notice a metal split or crack on the body side on either the driver or passenger side of the door check strap area
Source components: STRUCTURE.
Source record 10188794 at NHTSANHTSA communication ID: 10215888
NHTSA source summary · Original PDF not reviewed by Recallfolio
Key Cannot Be Removed From Ignition
Source components: ELECTRICAL SYSTEM:IGNITION:MODULE · EQUIPMENT.
Source record 10215888 at NHTSANHTSA communication ID: 10187067
NHTSA source summary · Original PDF not reviewed by Recallfolio
Key Cannot Be Removed From Ignition
Source components: EQUIPMENT.
Source record 10187067 at NHTSANHTSA communication ID: 10181554
NHTSA source summary · Original PDF not reviewed by Recallfolio
(Revision B): P2BA9 - NOX Exceedence - Insufficient Reductant Quality
Source components: ELECTRICAL SYSTEM.
Source record 10181554 at NHTSANHTSA communication ID: 10181547
NHTSA source summary · Original PDF not reviewed by Recallfolio
(Revision A) P2BA9 - NOX Exceedance - Insufficient Reductant Quality
Source components: ENGINE.
Source record 10181547 at NHTSANHTSA communication ID: 10221831
NHTSA source summary · Original PDF not reviewed by Recallfolio
(Revision A) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns
Source components: ELECTRICAL SYSTEM · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM) · POWER TRAIN:TRANSMISSION CASE/HOUSING.
Source record 10221831 at NHTSANHTSA communication ID: 10221788
NHTSA source summary · Original PDF not reviewed by Recallfolio
Transmission,Trans Oil Pump,Torque Converter, Flexplate, Rear Seal, Engine NOTE: FOR ALL PROMASTER (VF) 3.6L/62TE EQUIPPED VEHICLES: IF THE TRANSMISSION BRACKET TO THE TRANSMISSION CASE FASTENERS ARE REMOVED DURING SERVICING, THE FASTENERS (Part Number 06511385A$) ARE ONE TIME USEAGE, AND MUST BE REPLACED, AND PROPERLY TORQUED TO 105 NM. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA, Fastener Service Kit PN 68329056AA. Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA For vehicle noise and flex plate found broken on vehicles > 50K miles. 1)Verify and Take pictures of the Trans/engine dowel pin holes, to see if the holes on trans bell housing are oblong, send pictures to FCA Redacted Content. 2) Call FCA Redacted Content, if no oblong holes are found to arrange trans swap and fast track the trans back to QEC. If vehicle won?t move and has noise/leaking from transmission bell housing area, check transmission pump bushing. If pump bushing is scored or damaged, replace the pump assembly as opposed to transmission. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. When replacing the long block engine, the VVT Actuator's PN 05184101A* must also be replaced. Engineering is requesting additional information when the long block engine is replaced due to thrust washer failures. Contact FCA Redacted Content.
Source components: POWER TRAIN.
Source record 10221788 at NHTSANHTSA communication ID: 10180221
NHTSA source summary · Original PDF not reviewed by Recallfolio
(Revision A) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns
Source components: ELECTRICAL SYSTEM · ENGINE · POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10180221 at NHTSANHTSA communication ID: 10180178
NHTSA source summary · Original PDF not reviewed by Recallfolio
Transmission,Trans Oil Pump,Torque Converter, Flexplate, Rear Seal, Engine NOTE: FOR ALL PROMASTER (VF) 3.6L/62TE EQUIPPED VEHICLES: IF THE TRANSMISSION BRACKET TO THE TRANSMISSION CASE FASTENERS ARE REMOVED DURING SERVICING, THE FASTENERS (Part Number 06511385A$) ARE ONE TIME USEAGE, AND MUST BE REPLACED, AND PROPERLY TORQUED TO 105 NM. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA, Fastener Service Kit PN 68329056AA. Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA For vehicle noise and flex plate found broken on vehicles > 50K miles. 1)Verify and Take pictures of the Trans/engine dowel pin holes, to see if the holes on trans bell housing are oblong, send pictures to FCA Redacted Content. 2) Call FCA Redacted Content, if no oblong holes are found to arrange trans swap and fast track the trans back to QEC. If vehicle won?t move and has noise/leaking from transmission bell housing area, check transmission pump bushing. If pump bushing is scored or damaged, replace the pump assembly as opposed to transmission. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. When replacing the long block engine, the VVT Actuator's PN 05184101A* must also be replaced. Engineering is requesting additional information when the long block engine is replaced due to thrust washer failures. Contact FCA Redacted Content.
Source components: ENGINE · EQUIPMENT · POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER · SUSPENSION.
Source record 10180178 at NHTSANHTSA communication ID: 10223559
NHTSA source summary · Original PDF not reviewed by Recallfolio
Blind Spot Or Park Assist Warnings, False Activation
Source components: LANE DEPARTURE: BLIND SPOT DETECTION.
Source record 10223559 at NHTSA