55324
NHTSA communication ID: 10162497
NHTSA source summary · Original PDF not reviewed by Recallfolio
Head-Cylinder
Source components: ENGINE.
Source record 10162497 at NHTSAThe manufacturer’s record · Page 3 of 4
2017 Ram 2500
Manufacturer communications & TSBs.Page 3
Original record summaries, dates and identifiers for this model-year. Records 201–300 of 384, ordered newest first. Dated records on this page: Sep 14, 2016–May 20, 2019.
Back to 2017 Ram 2500 problems & recallsRead the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
OD55341
NHTSA communication ID: 10162520
NHTSA source summary · Original PDF not reviewed by Recallfolio
Vehicles Eligible For CSN U07 And V08, V11 or V16 Important Update To U07 Dealer Instructions
Source components: ENGINE · EQUIPMENT.
Source record 10162520 at NHTSA55272
NHTSA communication ID: 10162496
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tube- Fuel Filler
Source components: FUEL SYSTEM, GASOLINE.
Source record 10162496 at NHTSA55221
NHTSA communication ID: 10162495
NHTSA source summary · Original PDF not reviewed by Recallfolio
Engine Oil- OW20
Source components: ENGINE · EQUIPMENT.
Source record 10162495 at NHTSA55136
NHTSA communication ID: 10162494
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tube- Fuel Filler
Source components: FUEL SYSTEM, GASOLINE.
Source record 10162494 at NHTSA9003357
NHTSA communication ID: 10162477
NHTSA source summary · Original PDF not reviewed by Recallfolio
ADAPTER, Engine Oil Filter (Pentastar V6) Engineering is seeking information regarding OFA leaks. Questions/info can be directed to: Bob Jackson (248) 944-0466 - bob.jackson@fcagroup.com Ron Dallison (248-292-9510) ron.dallison@fcagroup.com Joe Lovell (734) 309-6467 - joe.lovell@fcagroup.com If no response in 15 minutes, proceed with repair. All vehicles equipped with a 3.2L or 3.6L except for model year 2014 vehicles with leak concern: 1) Ensure the Oil Filter Adapter (OFA) Cap O-ring is seated in the proper groove in the cap and not damaged or cut. 2) If replacing the (OFA) due to a leak detected between (OFA) and block. Ensure the torque on the 5 bolts are torqued to 12nm. If not record the actual values, torque to 12nm and contact the FCA employees listed below. 3) Remove the (OFA) and replace the O-ring and gaskets only (Kit #68191356A$), NOT THE OFA. 4) If oil was drained, add oil dye to ensure the leak is repaired. For model year 2014 vehicles replace the Oil Filter Adaptor.
Source components: ENGINE · EQUIPMENT.
Source record 10162477 at NHTSA55096
NHTSA communication ID: 10162493
NHTSA source summary · Original PDF not reviewed by Recallfolio
Engine Oil- OW20
Source components: ENGINE.
Source record 10162493 at NHTSA54966
NHTSA communication ID: 10162492
NHTSA source summary · Original PDF not reviewed by Recallfolio
Module-Parking Assist
Source components: LANE DEPARTURE: LANE KEEP: STEERING ASSIST.
Source record 10162492 at NHTSA54973
NHTSA communication ID: 10162491
NHTSA source summary · Original PDF not reviewed by Recallfolio
Outlet- Air conditioning & heater
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10162491 at NHTSA54931
NHTSA communication ID: 10162490
NHTSA source summary · Original PDF not reviewed by Recallfolio
TAILPIPE - EXHAUST
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE.
Source record 10162490 at NHTSA54920
NHTSA communication ID: 10162489
NHTSA source summary · Original PDF not reviewed by Recallfolio
Panel Assembly-Door Trim
Source components: STRUCTURE:BODY:DOOR.
Source record 10162489 at NHTSA54698
NHTSA communication ID: 10162488
NHTSA source summary · Original PDF not reviewed by Recallfolio
POWER DISTRIBUTION CENTER - INTELLIGENT POWER
Source components: EQUIPMENT.
Source record 10162488 at NHTSA54583
NHTSA communication ID: 10162487
NHTSA source summary · Original PDF not reviewed by Recallfolio
Transmission ? With Torque Converter
Source components: POWER TRAIN.
Source record 10162487 at NHTSA54637
NHTSA communication ID: 10162486
NHTSA source summary · Original PDF not reviewed by Recallfolio
FASCIA - REAR
Source components: STRUCTURE · STRUCTURE:BODY:BUMPERS.
Source record 10162486 at NHTSAVolume 5 Issue 4
NHTSA communication ID: 10162511
NHTSA source summary · Original PDF not reviewed by Recallfolio
Warranty Operations Newsletter Volume 5, Issue 4
Source components: EQUIPMENT.
Source record 10162511 at NHTSA54638
NHTSA communication ID: 10162485
NHTSA source summary · Original PDF not reviewed by Recallfolio
ASH RECEIVER - INSTRUMENT PANEL
Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL.
Source record 10162485 at NHTSABJA46597
NHTSA communication ID: 10139588
NHTSA source summary · Original PDF not reviewed by Recallfolio
Job aid - If you have a suspected TC shudder/vibration, check the Interactive Network for Service Bulletins for the vehicle you are working on. A test-drive snap shot may help you isolate the source of the issue.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · POWER TRAIN.
Source record 10139588 at NHTSA9003779
NHTSA communication ID: 10217458
NHTSA source summary · Original PDF not reviewed by Recallfolio
Diesel Particulate Filter (DPF) Assembly For Cummins equipped vehicles ONLY: If a customer comes in with a check engine light for P2002 which has led to replacing the DPF, please contact Dean Armstrong at cell (248) 202-8148. Cummins engineering is currently investigating the root cause to this condition. If you do not receive an answer or call back within 15 minutes, proceed with the repair.
Source components: ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:FILTER/SCREEN.
Source record 10217458 at NHTSA9003779
NHTSA communication ID: 10216277
NHTSA source summary · Original PDF not reviewed by Recallfolio
Diesel Particulate Filter (DPF) Assembly For Cummins equipped vehicles ONLY: If a customer comes in with a check engine light for P2002 which has led to replacing the DPF, please contact Dean Armstrong at cell (248) 202-8148. Cummins engineering is currently investigating the root cause to this condition. If you do not receive an answer or call back within 15 minutes, proceed with the repair.
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL · FUEL SYSTEM, OTHER:FUEL FILTER.
Source record 10216277 at NHTSA9003600
NHTSA communication ID: 10220474
NHTSA source summary · Original PDF not reviewed by Recallfolio
USB Charging port.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10220474 at NHTSA9003600
NHTSA communication ID: 10191445
NHTSA source summary · Original PDF not reviewed by Recallfolio
USB Charging port.
Source components: ELECTRICAL SYSTEM:WIRING:CONNECTORS/PLUGS:ACCESORY POWER OUTLET/JACK/PORT/USB/SAE/CIGARETTE LIGHTER.
Source record 10191445 at NHTSA9003820
NHTSA communication ID: 10217456
NHTSA source summary · Original PDF not reviewed by Recallfolio
Shifter Tower If you are working on a vehicle with a noise/rattle or noise/vibration complaint in 5th or 6th gear on decel, the field has had success by simply removing and reinstalling the shift tower from the transmission. Leaving the boot on the tower of the shifter intact, remove the two external boots first to get to the shifter tower. Please attempt this repair first if you have this concern. Follow the service instructions to ensure proper installation of the tower.
Source components: POWER TRAIN.
Source record 10217456 at NHTSA9003821
NHTSA communication ID: 10217453
NHTSA source summary · Original PDF not reviewed by Recallfolio
Engine Air Filter For RAM 2500, 3500, 4500, and 5500, 6.7L turbo diesel engines, customers are experiencing a MIL with DTC P2280 and oil soaked air intake filters are being replaced to service the vehicle. Please call Dipak Patel (Product Engineer) at 810-399-9010 to help with collecting more information on this issue. If no response in 15 minutes, please proceed with repair.
Source components: FUEL SYSTEM, DIESEL · FUEL SYSTEM, GASOLINE · POWER TRAIN.
Source record 10217453 at NHTSA9003293
NHTSA communication ID: 10217451
NHTSA source summary · Original PDF not reviewed by Recallfolio
A/C Pressure Transducer A/C inoperative and diagnosis leads to pressure transducer. Call Steve Rice at cell (248) 867-0061 before replacing the pressure transducer. If no response in 15 minutes, please proceed with repair.
Source components: SERVICE BRAKES.
Source record 10217451 at NHTSA9003820
NHTSA communication ID: 10216115
NHTSA source summary · Original PDF not reviewed by Recallfolio
Shifter Tower If you are working on a vehicle with a noise/rattle or noise/vibration complaint in 5th or 6th gear on decel, the field has had success by simply removing and reinstalling the shift tower from the transmission. Leaving the boot on the tower of the shifter intact, remove the two external boots first to get to the shifter tower. Please attempt this repair first if you have this concern. Follow the service instructions to ensure proper installation of the tower.
Source components: EQUIPMENT · POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:GEARS.
Source record 10216115 at NHTSA9003821
NHTSA communication ID: 10216112
NHTSA source summary · Original PDF not reviewed by Recallfolio
Engine Air Filter For RAM 2500, 3500, 4500, and 5500, 6.7L turbo diesel engines, customers are experiencing a MIL with DTC P2280 and oil soaked air intake filters are being replaced to service the vehicle. Please call Dipak Patel (Product Engineer) at 810-399-9010 to help with collecting more information on this issue. If no response in 15 minutes, please proceed with repair.
Source components: EQUIPMENT · FUEL SYSTEM, DIESEL.
Source record 10216112 at NHTSA9003293
NHTSA communication ID: 10216110
NHTSA source summary · Original PDF not reviewed by Recallfolio
A/C Pressure Transducer A/C inoperative and diagnosis leads to pressure transducer. Call Steve Rice at cell (248) 867-0061 before replacing the pressure transducer. If no response in 15 minutes, please proceed with repair.
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER · VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM.
Source record 10216110 at NHTSA0805317REVC
NHTSA communication ID: 10224953
NHTSA source summary · Original PDF not reviewed by Recallfolio
RA3 and RA4 Radio Enhancements This bulletin involves inspecting and if required, updating the radio software. Customers may experience one or more of the following:Radio functions/touchscreen locks up (does not affect backup camera). Phone presets do not save. ?Navigation Failed? message is displayed. Navigation is inoperative or inaccurate. CD player will not play songs and/or locks up the radio. Clock will not automatically update to local time. Clock may be off by several hours. (RA3 only). Poor or no connection to cellular network. ?Charge Complete? notification is not received (RU PHEV only). Some Uconnect® App remote commands do not execute with the vehicle. Radio Apps are inoperative. Radio display screen is black or blank. Battery drain - due to radio staying on. Navigation failed message is displayed. Clock not automatically updating to local time. Improvements:Auto Play can now be configured. Media devices, Phone pairing and Bluetooth® usage improvements. Add the ability to drag and drop icons into the menu bar. Adds ?Do Not Disturb? text message feature. Fix for radio locks up/frozen. Enhanced Voice recognition (VR) performance. Improved tuner performance. Human Machine Interface (HMI) improvements. Satellite radio reception improvements.
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10224953 at NHTSA0500517
NHTSA communication ID: 10224950
NHTSA source summary · Original PDF not reviewed by Recallfolio
Left Front Brake Hose Weepage This bulletin involves inspecting the left front brake hose and Wheel Speed Sensor (WSS) wire harness, replace if needed. Customers may notice a low brake fluid and/or Anti-Lock Brake System (ABS) warning indicator(s) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set:C0031-1D - Left Front Wheel Speed Sensor - Circuit Current Out Of Range. C0031-2F - Left Front Wheel Speed Sensor - Signal Erratic. C0031-62 - Left Front Wheel Speed Sensor - Signal Compare Failure. C0049-7B - Brake Fluid - Low Fluid Level.
Source components: BACK OVER PREVENTION · FUEL SYSTEM, GASOLINE · LANE DEPARTURE · SERVICE BRAKES · WHEELS.
Source record 10224950 at NHTSA9003808
NHTSA communication ID: 10224903
NHTSA source summary · Original PDF not reviewed by Recallfolio
Rocker Arm If normal diagnosis has led to a broken rocker arm, please replace all 12 rockers. Contact Stephen Alvarado at the STAR Center at (866) 799-1695 ext. (4720271) to arrange a fast track return for the parts. Cummins engineering is currently investigating the root cause to this condition and would like to get these parts back for analysis.
Source components: EQUIPMENT.
Source record 10224903 at NHTSA9003718
NHTSA communication ID: 10224902
NHTSA source summary · Original PDF not reviewed by Recallfolio
Rear View Camera In the case for inoperative camera, radio screen is blue or black in reverse mode. Before proceeding with the normal procedure call Ali Ikram at (248) 576-9265 Mon- Fri between 8 am - 4pm. If you do not get a response within 15 minutes continue with the normal diagnostic procedure. Before replacing the camera, please disconnect and clean harness and camera connector. Clean & dry both connectors. If replacing the camera, please replace wire harness also and return parts to QEC.
Source components: BACK OVER PREVENTION: CAMERA SYSTEM.
Source record 10224902 at NHTSA9003805
NHTSA communication ID: 10224896
NHTSA source summary · Original PDF not reviewed by Recallfolio
Hub & Bearing Assy - Front For issues with front wheel Hub/Bearings appearing to leak grease, do not replace the parts. Please call Paul Kuehl for further assistance, at cell (248) 535-7013. If no response in 15minutes, proceed with repair, but do not replace bearing(s) unless there is visible damage, see Service Manual Diagnostic Procedure which includes a picture of typical bearing grease weepage.
Source components: EQUIPMENT · POWER TRAIN · WHEELS.
Source record 10224896 at NHTSA9003802
NHTSA communication ID: 10224893
NHTSA source summary · Original PDF not reviewed by Recallfolio
SCR Converter - Ammonia Trap If a customer comes in with a check engine light for P20EE and has led to replacing the SCR, please contact Dean Armstrong at (248)-944-5364. Cummins and FCA engineering is currently investigating the root cause to this condition. If you do not receive an answer or call back within 15 minutes, proceed with normal diagnostics
Source components: POWER TRAIN.
Source record 10224893 at NHTSA0805317
NHTSA communication ID: 10224936
NHTSA source summary · Original PDF not reviewed by Recallfolio
RA3 and RA4 Radio Enhancements This bulletin involves inspecting and if required, updating the radio software. Customers may experience one or more of the following:Radio functions/touchscreen locks up (does not affect backup camera). Phone presets do not save. ?Navigation Failed? message is displayed. Navigation is inoperative or inaccurate. CD player will not play songs and/or locks up the radio. Clock will not automatically update to local time. Clock may be off by several hours. (RA3 only). Poor or no connection to cellular network. ?Charge Complete? notification is not received (RU PHEV only). Some Uconnect® App remote commands do not execute with the vehicle. Radio Apps are inoperative. Radio display screen is black or blank. Battery drain - due to radio staying on. Navigation failed message is displayed. Clock not automatically updating to local time. Improvements:Auto Play can now be configured. Media devices, Phone pairing and Bluetooth® usage improvements. Add the ability to drag and drop icons into the menu bar. Adds ?Do Not Disturb? text message feature. Fix for radio locks up/frozen. Fix for radio loses time. Enhanced Voice recognition (VR) performance. Media devices, phone pairing and Bluetooth usage improvements. Improved tuner performance. Human Machine Interface (HMI) improvements. Satellite radio reception improvements.
Source components: BACK OVER PREVENTION:DISPLAY FUNCTION · EQUIPMENT:ELECTRICAL.
Source record 10224936 at NHTSA9003788
NHTSA communication ID: 10121756
NHTSA source summary · Original PDF not reviewed by Recallfolio
Master Cylinder, Brake Before replacing the master cylinder please call Paul Kuehl at (248) 535-7013. If no response in 15 minutes, proceed with repair.
Source components: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER.
Source record 10121756 at NHTSA23-044-17
NHTSA communication ID: 10121799
NHTSA source summary · Original PDF not reviewed by Recallfolio
Headlamp Aim Incorrect This bulletin involves adjusting the headlamps to proper specifications. The customer may describe that the headlamps are aimed too high.
Source components: EXTERIOR LIGHTING:HEADLIGHTS.
Source record 10121799 at NHTSA08-028-17 REV. B
NHTSA communication ID: 10121784
NHTSA source summary · Original PDF not reviewed by Recallfolio
RA3 and RA4 Radio Over The Air Software Updates This bulletin provides information regarding the latest Flash Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The following improvements are included in this update:Fix for sport mode not working in the performance menu page (2015 LA equipped with 6.4L and 5.7L Sales Codes ESH and EZC Only). Adds Apple Siri® Eyes Free capability for iPhone® owners. Auto Play can now be configured. Adds do not disturb text message feature. The ability to drag and drop icons into the menu bar. Fix for radio locks up/frozen. Fix for stuck on black/blank screen. Human Machine Interface (HMI) improvements. Several navigation improvements. Fix for radio loss of time display. Media devices, phone pairing and Bluetooth usage improvements. Improved tuner performance. Enhanced Voice recognition (VR) performance. Enhancements in Connectivity Apps (Yelp, Pandora, Aha, etc).
Source components: ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10121784 at NHTSA9003723
NHTSA communication ID: 10121742
NHTSA source summary · Original PDF not reviewed by Recallfolio
Amplifier Vehicles needing amplifier replacement, please call Rayyan Mohammed at Cell (248) 954-0790 prior to repair. If no response in 15 minutes, proceed with the repair.
Source components: EQUIPMENT · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10121742 at NHTSA23-040-17
NHTSA communication ID: 10121777
NHTSA source summary · Original PDF not reviewed by Recallfolio
Gap at Center Stack at the Instrument Panel This bulletin involves rework to the center stack trim at the instrument panel. The customer may notice a large gap where the center stack meets the instrument panelFig. 1.Gap at Center Stack Trim
Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL · EQUIPMENT.
Source record 10121777 at NHTSA23-039-17
NHTSA communication ID: 10121776
NHTSA source summary · Original PDF not reviewed by Recallfolio
Rear Door Fixed Glass Cover is Loose This bulletin involves rework to the rear door fixed glass cover trim. The customer may notice the glass cover trim is loose or shows a gap on either of the rear doorFig. 1.Gap Identified at Door
Source components: EQUIPMENT · VISIBILITY.
Source record 10121776 at NHTSA1807317
NHTSA communication ID: 10224744
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Powertrain Diagnostic and System Improvements This bulletin involves reprogramming the Engine Control Module/Powertrain Control Module (ECM/PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following DTCs have been set:P202E - Reductant Injector Performance. P218F - Reductant No Flow Detected. Customers may experience one or more of the following conditions:Unpleasant odor in the vehicle at low speeds and when regeneration is active. Intermittent no crank and no start(68RFE automatic transmission only). Unable to complete ?Fuel Pressure Override? test in the scan tool. In addition, the following software enhancements are also available:Calibration changes to engine-off timer. Changes to engine warm up protection. Hydrocarbon Desorption (HCD) driveability improvements. A/C pressure sensor update. Exhaust Gas Recirculation (EGR) calibration changes. Improved fuel filter reminder calibration. Improved regeneration at low speeds. Updated accelerator pedal calibration to reduce hesitation. Calibration changes to reduce turbo inlet temperatures.
Source components: BACK OVER PREVENTION · ELECTRICAL SYSTEM · EXTERIOR LIGHTING · FUEL SYSTEM, GASOLINE · POWER TRAIN · SERVICE BRAKES, HYDRAULIC.
Source record 10224744 at NHTSA9003758
NHTSA communication ID: 10223722
NHTSA source summary · Original PDF not reviewed by Recallfolio
EGR Cooler If a customer comes in with a check engine light for P0401, P2281 or P0234 and the,technician has determined the EGR Cooler is plugged with soot, please contact Stephen Alvarado at the STAR Center at (866) 799-1695 ext. (4720271). Cummins Engineering is currently investigating root cause of this condition. If you do not receive an answer or call back within 15 minutes, proceed with normal diagnostics.
Source components: AIR BAGS · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE).
Source record 10223722 at NHTSA0805317A
NHTSA communication ID: 10223638
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin involves inspecting and if required, updating the radio software.
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10223638 at NHTSA0802817
NHTSA communication ID: 10223635
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides information regarding the latest Flash Over The Air update (FOTA) and provides a service technician an overview of the steps a customer will need to take to complete the update.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10223635 at NHTSA68234041A$
NHTSA communication ID: 10108546
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Thermal Expansion Valve (TXV), H-valve For D trucks only; When diagnosing an A/C system leak at the TXV (Thermal Expansion Valve, H-valve), do not replace the TXV unless it has been proven to be defective for function or for a leak. Instead replace just the O-ring(s) part number 05161806AA. For any questions call Matt Mihm cell (248) 736-6542. If no response in 15 minutes, please continue with repair."
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10108546 at NHTSA0805317
NHTSA communication ID: 10223639
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin involves inspecting and if required, updating the radio software.
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10223639 at NHTSA9003742
NHTSA communication ID: 10219843
NHTSA source summary · Original PDF not reviewed by Recallfolio
Gear set If you are working on a 2017 HD truck with axle whine concern and you're replacing the gear set, please call Mark Houy at cell: (248) 961-1826. If no response within 15 minutes, please proceed with the repair.
Source components: POWER TRAIN.
Source record 10219843 at NHTSA9003749
NHTSA communication ID: 10138872
NHTSA source summary · Original PDF not reviewed by Recallfolio
RA2 Radio 5" Uconnect Before replacing this radio, make sure you can reproduce the customer issue. If the radio is locked up, has a blank screen, or no sound, please perform a vehicle battery reset. If radio functionality is resumed, return the vehicle to the customer. If there are any questions or concerns or the vehicle has been in for repair for the same radio concern more than once, please call Rick Gordon at Cell (248) 630- 6281. If no response in 15 minutes, proceed with repair.
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10138872 at NHTSA9003742
NHTSA communication ID: 10138868
NHTSA source summary · Original PDF not reviewed by Recallfolio
Gear set If you are working on a 2017 HD truck with axle whine concern and you're replacing the gear set, please call Mark Houy at cell: (248) 961-1826. If no response within 15 minutes, please proceed with the repair.
Source components: POWER TRAIN.
Source record 10138868 at NHTSA18-040-17 REV. A
NHTSA communication ID: 10219907
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 6.4L Powertrain Diagnostic and System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. This bulletin fixes all vehicles listed and also contains an optional software path for situations where the customer is specifically complaining of a drone noise, shudder, pulsation, or vibration under light throttle applications, while vehicle is operating in Multi Displacement System/Economics (MDS/ECO)mode (optional software available for D2&DJ vehicles).There will be two separate software options displayed on the wiTECH flash tab. The software file released for this condition contains the verbiage ?MDS NOISE?. The other file is the standard software that does not contain improvements for the drone/shudder concern. If for some reason the customer finds this shudderimprovement objectionable, the PCM software may be returned/reflashed to the standard version.Both software versions will address the remaining conditions noted in the bulletin.A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following DTCs have been set:P1404 - EGR Close Position Performance. P0404 - EGR Position Sensor Performance. P0405 - EGR Position Sensor Circuit Low. P0406 - EGR Position Sensor Circuit High. P2172 ? High Airflow/Vacuum leak detected. P0870 - OD Hydraulic Pressure Test (66RFE Only). This software update also includes the following enhancements:Reduced downhill gear hunting when using cruise control. Reduced drone noise at minimum converter clutch operating speed. Reduced low speed drone noise. Improved Exhaust Gas Recirculation (EGR) valve control at maximum desired lift. This will help reduce, long crank/start time. Improvements to engine idle quality such as rough idle after high altitude start and stability of engine RPM at idle.
Source components: POWER TRAIN · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
Source record 10219907 at NHTSA18-040-17 REV. A
NHTSA communication ID: 10138930
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 6.4L Powertrain Diagnostic and System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. This bulletin fixes all vehicles listed and also contains an optional software path for situations where the customer is specifically complaining of a drone noise, shudder, pulsation, or vibration under light throttle applications, while vehicle is operating in Multi Displacement System/Economics (MDS/ECO)mode (optional software available for D2&DJ vehicles).There will be two separate software options displayed on the wiTECH flash tab. The software file released for this condition contains the verbiage MDS NOISE. The other file is the standard software that does not contain improvements for the drone/shudder concern. If for some reason the customer finds this shudderimprovement objectionable, the PCM software may be returned/reflashed to the standard version.Both software versions will address the remaining conditions noted in the bulletin.A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following DTCs have been set:P1404 - EGR Close Position Performance. P0404 - EGR Position Sensor Performance. P0405 - EGR Position Sensor Circuit Low. P0406 - EGR Position Sensor Circuit High. P2172 ? High Airflow/Vacuum leak detected. P0870 - OD Hydraulic Pressure Test (66RFE Only). This software update also includes the following enhancements:Reduced downhill gear hunting when using cruise control. Reduced drone noise at minimum converter clutch operating speed. Reduced low speed drone noise. Improved Exhaust Gas Recirculation (EGR) valve control at maximum desired lift. This will help reduce, long crank/start time. Improvements to engine idle quality such as rough idle after high altitude start and stability of engine RPM at idle. Refine MDS transitions with improved slip and torque management
Source components: POWER TRAIN.
Source record 10138930 at NHTSA9003466
NHTSA communication ID: 10219840
NHTSA source summary · Original PDF not reviewed by Recallfolio
Rear Crank Shaft Oil Seal and Retainer Plate For Cummins equipped vehicles only; If you are working on a 2016 or 2017 vehicle ONLY and are replacing the Rear Main Seal for oil leak, replace seal, retainer and gasket using PNs; 05086755A$, 05086754A$, 05015705A$. Remove the retainer with the seal installed. Please do not disturb seal in retainer when removing from engine. Please refer to detailed repair instructions in DealerConnect TechConnect for oil seal retainer replacement. Cummins Engineering is currently investigating the root cause of the oil leak concern and would like to analyze these parts. Please contact Chad Eichbrecht at cell (248) 309-2695 to arrange for part return. If you do not receive a response within 15 minutes, please proceed with normal repair.
Source components: ENGINE AND ENGINE COOLING.
Source record 10219840 at NHTSA9003740
NHTSA communication ID: 10219836
NHTSA source summary · Original PDF not reviewed by Recallfolio
Oil Pan 2012-2017 Cummins engines with oil pan leaks, please inspect the shallow area of the oil pan for cracks. If cracks are found, please replace as necessary. Cracks are typically found above the cross member area. Please contact Chad Eichbrecht at cell (248) 309-2695 to arrange for part return or email chad.w.eichbrecht@fcagroup.com If you do not receive a response within 15 minutes, please proceed with normal repair.
Source components: ENGINE AND ENGINE COOLING.
Source record 10219836 at NHTSA9003466
NHTSA communication ID: 10138865
NHTSA source summary · Original PDF not reviewed by Recallfolio
Rear Crank Shaft Oil Seal and Retainer Plate For Cummins equipped vehicles only; If you are working on a 2016 or 2017 vehicle ONLY and are replacing the Rear Main Seal for oil leak, replace seal, retainer and gasket using PNs; 05086755A$, 05086754A$, 05015705A$. Remove the retainer with the seal installed. Please do not disturb seal in retainer when removing from engine. Please refer to detailed repair instructions in DealerConnect TechConnect for oil seal retainer replacement. Cummins Engineering is currently investigating the root cause of the oil leak concern and would like to analyze these parts. Please contact Chad Eichbrecht at cell (248) 309-2695 to arrange for part return. If you do not receive a response within 15 minutes, please proceed with normal repair.
Source components: ENGINE AND ENGINE COOLING.
Source record 10138865 at NHTSA9003357
NHTSA communication ID: 10138863
NHTSA source summary · Original PDF not reviewed by Recallfolio
Pentastar Oil Filter Adapter All vehicles equipped with a 3.2L or 3.6L engine; If replacing the Oil Filter Adapter (OFA) due to a leak detected between OFA and block, an O-ring kit (68191356AA) is now available to repair OFA/Block Interface leaks. Using dye will assist in determining source of leak. Ensure OFA Cap Oring is seated in the proper groove in the cap and not damaged or cut. Engineering is seeking information regarding OFA leaks. Questions/info can be directed to: Bob Jackson Cell (248) 944-0466 - bob.jackson@fcagroup.com Ron Dallison Cell (248-292-9510) ron.dallison@fcagroup.com Joe Lovell Cell (734) 309-6467 - joe.lovell@fcagroup.com If a response is not received within 15 mins, then proceed with the necessary repair.
Source components: ENGINE AND ENGINE COOLING.
Source record 10138863 at NHTSA9003740
NHTSA communication ID: 10138861
NHTSA source summary · Original PDF not reviewed by Recallfolio
Oil Pan 2012-2017 Cummins engines with oil pan leaks, please inspect the shallow area of the oil pan for cracks. If cracks are found, please replace as necessary. Cracks are typically found above the cross member area. Please contact Chad Eichbrecht at cell (248) 309-2695 to arrange for part return or email chad.w.eichbrecht@fcagroup.com If you do not receive a response within 15 minutes, please proceed with normal repair.
Source components: ENGINE AND ENGINE COOLING.
Source record 10138861 at NHTSA9003413
NHTSA communication ID: 10219831
NHTSA source summary · Original PDF not reviewed by Recallfolio
Accelerator Pedal Before replacing accelerator pedal, be sure to follow fault code diagnostic procedures in service manual. Make sure to check wiring and connectors. P2122 and P2127 will set if accelerator pedal connector is disconnected during diagnosis. Make sure codes are active before replacing pedal. DTC P2299 is usually caused by a two footed driver and accelerator pedal should not be replaced for this fault.
Source components: VEHICLE SPEED CONTROL:ACCELERATOR PEDAL.
Source record 10219831 at NHTSA9003413
NHTSA communication ID: 10138856
NHTSA source summary · Original PDF not reviewed by Recallfolio
Accelerator Pedal Before replacing accelerator pedal, be sure to follow fault code diagnostic procedures in service manual. Make sure to check wiring and connectors. P2122 and P2127 will set if accelerator pedal connector is disconnected during diagnosis. Make sure codes are active before replacing pedal. DTC P2299 is usually caused by a two footed driver and accelerator pedal should not be replaced for this fault.
Source components: VEHICLE SPEED CONTROL:ACCELERATOR PEDAL.
Source record 10138856 at NHTSA18-055-17
NHTSA communication ID: 10138902
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Some customers may experience when staring a cold engine the vehicle has a rough idle and/or the engine will immediately shut off.
Source components: POWER TRAIN.
Source record 10138902 at NHTSA21-024-17
NHTSA communication ID: 10219874
NHTSA source summary · Original PDF not reviewed by Recallfolio
Transmission Oil Pan Leaking This bulletin involves inspecting and if necessary resealing the transmission oil pan. Some customers or technicians may experience a transmission oil leak. Upon further investigation, a technician may find the transmission oil pan is leaking in this suspected areaFig. 1.Transmission Oil Pan1 - Suspected Leak Area
Source components: POWER TRAIN.
Source record 10219874 at NHTSA9003109
NHTSA communication ID: 10219830
NHTSA source summary · Original PDF not reviewed by Recallfolio
Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform this inspection: Check if float sensor is rotated off location from the bottle anti-rotation features that surround the SENSOR. Check to determine if the issue has been resolved. Continue with repair if necessary. Please contact Chris Koch at cell (248) 248-622-6417 if you have questions or need additional information.
Source components: VISIBILITY:WINDSHIELD WIPER/WASHER.
Source record 10219830 at NHTSA9003530
NHTSA communication ID: 10219826
NHTSA source summary · Original PDF not reviewed by Recallfolio
Brake Pedal Sensor For vehicles with DTC's P0572 or C0042, or complaints of brake lights staying on or cruise control not setting, please use wiTech to check the Brake Pedal Home Position setting and actual pedal resting position under brake pedal status in the ABS module. Before replacing the Brake Pedal Position Sensor, please call Rick Gordon at Cell (248) 630-6281. If no response within 15 minutes, proceed with repair.
Source components: SERVICE BRAKES.
Source record 10219826 at NHTSA21-024-17
NHTSA communication ID: 10138899
NHTSA source summary · Original PDF not reviewed by Recallfolio
Transmission Oil Pan Leaking This bulletin involves inspecting and if necessary resealing the transmission oil pan. Some customers or technicians may experience a transmission oil leak. Upon further investigation, a technician may find the transmission oil pan is leaking in this suspected areaFig. 1.Transmission Oil Pan1 - Suspected Leak Area
Source components: POWER TRAIN.
Source record 10138899 at NHTSA9003109
NHTSA communication ID: 10138855
NHTSA source summary · Original PDF not reviewed by Recallfolio
Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform this inspection: Check if float sensor is rotated off location from the bottle anti-rotation features that surround the SENSOR. Check to determine if the issue has been resolved. Continue with repair if necessary. Please contact Chris Koch at cell (248) 248-622-6417 if you have questions or need additional information.
Source components: VISIBILITY:WINDSHIELD WIPER/WASHER.
Source record 10138855 at NHTSA9003530
NHTSA communication ID: 10138851
NHTSA source summary · Original PDF not reviewed by Recallfolio
Brake Pedal Sensor For vehicles with DTC's P0572 or C0042, or complaints of brake lights staying on or cruise control not setting, please use wiTech to check the Brake Pedal Home Position setting and actual pedal resting position under brake pedal status in the ABS module. Before replacing the Brake Pedal Position Sensor, please call Rick Gordon at Cell (248) 630-6281. If no response within 15 minutes, proceed with repair.
Source components: SERVICE BRAKES.
Source record 10138851 at NHTSAD-17-12
NHTSA communication ID: 10140015
NHTSA source summary · Original PDF not reviewed by Recallfolio
Shop Certification Program Guidelines
Source components: EQUIPMENT.
Source record 10140015 at NHTSA9003059
NHTSA communication ID: 10217529
NHTSA source summary · Original PDF not reviewed by Recallfolio
Park Assist Sensor 1) Active or Stored DTC of Signal Shape / Waveform Failure fault: B128E-25, B128F-25, B1290-25, B1291-25, B1292-25, B1293-25, B1295-25, B1296-25, B1297-25, and/or B1298-25, check for snow/mud/ice/obstruction and clean the Sensors, both front and back (behind bumper) of sensor. The snow/mud/ice can be behind the bumper, sensor retainer and/or the sensor which may cause customers to think they have an issue since they cleaned the front of the sensor/bumper, but not behind where dirt/mud/ice snow can accumulate. Once the Bumper and Sensors are completely cleaned and clear of snow, mud, ice, and/or obstruction, the sensors must activate in order for the faults to go STORED. After cleaning the Bumper and Sensors, turn off the engine, wait 10 seconds, turn on the engine and then place the vehicle in REVERSE so that the sensors activate. The faults will go STORED. 2) Active or Stored DTC code of Short to Ground fault: B128E-11, B128F-11, B1290-11, B1291-11, B1292-11, B1293-11, B1294-11, B1295-11, B1296-11, and/or B1298-11, or if you have an active or stored DTC code of Performance or Incorrect Operation fault: B128E-92, B128F-92, B1290-92, B1291-92, B1293-92, B1294-92, B1295-92, B1296-92, B1297-92, and/or B1298-92, then check the wiring behind the sensor. Specifically, ensure that the connector behind the park assist sensor is fully mounted. Ensure also, there is no dirt, corrosion, or damage in this connector behind the park assist sensor as this will also cause a Short to Ground fault. With potential wiring issues addressed, the sensors must activate in order for the faults to go STORED. After all sensors are properly connected (you will likely hear a click once the connector is fully seated on the sensor), turn off the engine, wait 10 seconds, turn on the engine and then place the vehicle in REVERSE so that the sensors activate. The faults will go STORED.
Source components: BACK OVER PREVENTION · ELECTRICAL SYSTEM.
Source record 10217529 at NHTSA9003696
NHTSA communication ID: 10217524
NHTSA source summary · Original PDF not reviewed by Recallfolio
Door Hinge Assembly Side door hinge noisy. Only replace the door hinge with the integral check device. Do not replace the simple hinge if it is not damaged it is not the source of the noise. Replacing it unnecessary and is an over-repair.
Source components: STRUCTURE:BODY:DOOR:HINGE AND ATTACHMENTS.
Source record 10217524 at NHTSA31115
NHTSA communication ID: 10140010
NHTSA source summary · Original PDF not reviewed by Recallfolio
Cover - Roof Rack Youhave been identified aseither having stock,or have stock in transit toyour dealership. Please return allsuspect stock of part numbers:68212041AC,68141170AC,55112738AA.See attachmentsfor identifying suspect material. Please return suspect partsback toyour facing depot using Return Code 02,before 19April,2017.
Source components: EQUIPMENT · STRUCTURE:BODY:ROOF AND PILLARS.
Source record 10140010 at NHTSA31127
NHTSA communication ID: 10140009
NHTSA source summary · Original PDF not reviewed by Recallfolio
Housing Assy - Fuel Filler Door Youhave been identified aseither having stock,or have stock in transit toyour dealership. Please return allsuspect stock of part numbers:68148794AH,68148794AF,68148794AD,68156453AH,68156453AF, 68156453AD,68161542AE,68161542AD.See attachment for identifying suspect material. Please return suspect partsback toyour facing depot using Return Code 02,before 19April,2017.
Source components: FUEL SYSTEM, GASOLINE · FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP.
Source record 10140009 at NHTSA31056
NHTSA communication ID: 10140008
NHTSA source summary · Original PDF not reviewed by Recallfolio
Recliner - Stow and Go: Return Youhave been identified aseither having stock,or have stock in transit toyour dealership. Please return allstock of following part numbers:68241568AB,68241568AC,68241569AB,68241569AC, 68241570AB,68241571A.Replacement part numbersare 68241568AD,68241569AD,68241570AD,68241571AD, which are in stock and available. Please return suspect partsback toyour facing depot using Return Code 02,before 19April,2017.
Source components: EQUIPMENT · SEATS.
Source record 10140008 at NHTSA9003059
NHTSA communication ID: 10139997
NHTSA source summary · Original PDF not reviewed by Recallfolio
Park Assist Sensor 1) Active or Stored DTC of Signal Shape / Waveform Failure fault: B128E-25, B128F-25, B1290-25, B1291-25, B1292-25, B1293-25, B1295-25, B1296-25, B1297-25, and/or B1298-25, check for snow/mud/ice/obstruction and clean the Sensors, both front and back (behind bumper) of sensor. The snow/mud/ice can be behind the bumper, sensor retainer and/or the sensor which may cause customers to think they have an issue since they cleaned the front of the sensor/bumper, but not behind where dirt/mud/ice snow can accumulate. Once the Bumper and Sensors are completely cleaned and clear of snow, mud, ice, and/or obstruction, the sensors must activate in order for the faults to go STORED. After cleaning the Bumper and Sensors, turn off the engine, wait 10 seconds, turn on the engine and then place the vehicle in REVERSE so that the sensors activate. The faults will go STORED. 2) Active or Stored DTC code of Short to Ground fault: B128E-11, B128F-11, B1290-11, B1291-11, B1292-11, B1293-11, B1294-11, B1295-11, B1296-11, and/or B1298-11, or if you have an active or stored DTC code of Performance or Incorrect Operation fault: B128E-92, B128F-92, B1290-92, B1291-92, B1293-92, B1294-92, B1295-92, B1296-92, B1297-92, and/or B1298-92, then check the wiring behind the sensor. Specifically, ensure that the connector behind the park assist sensor is fully mounted. Ensure also, there is no dirt, corrosion, or damage in this connector behind the park assist sensor as this will also cause a Short to Ground fault. With potential wiring issues addressed, the sensors must activate in order for the faults to go STORED. After all sensors are properly connected (you will likely hear a click once the connector is fully seated on the sensor), turn off the engine, wait 10 seconds, turn on the engine and then place the vehicle in REVERSE so that the sensors activate. The faults will go STORED.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10139997 at NHTSA9003696
NHTSA communication ID: 10139992
NHTSA source summary · Original PDF not reviewed by Recallfolio
Door Hinge Assembly Side door hinge noisy. Only replace the door hinge with the integral check device. Do not replace the simple hinge if it is not damaged it is not the source of the noise. Replacing it unnecessary and is an over-repair.
Source components: STRUCTURE:BODY:DOOR.
Source record 10139992 at NHTSA30948
NHTSA communication ID: 10140007
NHTSA source summary · Original PDF not reviewed by Recallfolio
Molding Assy ?Frt door day light opening Rt/Lt: Return You have been identified as either having stock, or have stock in transit to your dealership. Please return all suspect stock of following part numbers: 57010364AI, 57010365AI, 57010504AJ, 57010505AJ, 68224368AB, 68224369AB. Please return suspect parts back to your facing depot using Return Code 02, before 17 April, 2017.
Source components: EQUIPMENT · INTERIOR LIGHTING.
Source record 10140007 at NHTSA30731
NHTSA communication ID: 10140006
NHTSA source summary · Original PDF not reviewed by Recallfolio
04627694AA Purge Control - Valve You have been identified as either having stock, or have stock in transit to your dealership. Suspect stock of part number: 04627694AA must be returned. See attached for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 17 April, 2017.
Source components: ENGINE · ENGINE AND ENGINE COOLING.
Source record 10140006 at NHTSAD-17-11
NHTSA communication ID: 10140014
NHTSA source summary · Original PDF not reviewed by Recallfolio
Vehicle Restriction Program - Cummins Enhanced Customer Satisfaction (ECS)
Source components: EQUIPMENT.
Source record 10140014 at NHTSA30928
NHTSA communication ID: 10140005
NHTSA source summary · Original PDF not reviewed by Recallfolio
55395241AG Weatherseal - Windshield to Cowl Please return allstock of following part numbers:55395241AG,55395241AE.Replacement ispart number 55395241AH which isin stock and available. Please return suspect partsback toyour facing depot using Return Code 02,before 12April,2017
Source components: VISIBILITY:WINDSHIELD.
Source record 10140005 at NHTSA23-014-17
NHTSA communication ID: 10217568
NHTSA source summary · Original PDF not reviewed by Recallfolio
Cracked Clearance Lamps This bulletin involves replacing the cab clearance lamps. The vehicle may have been built with cab clearance lamps that may fail prematurely.
Source components: ELECTRICAL SYSTEM:INTERIOR LAMPS/BULBS.
Source record 10217568 at NHTSA23-014-17
NHTSA communication ID: 10140036
NHTSA source summary · Original PDF not reviewed by Recallfolio
Cracked Clearance Lamps This bulletin involves replacing the cab clearance lamps. The vehicle may have been built with cab clearance lamps that may fail prematurely.
Source components: EXTERIOR LIGHTING.
Source record 10140036 at NHTSAD-17-08
NHTSA communication ID: 10140013
NHTSA source summary · Original PDF not reviewed by Recallfolio
Essential Flash Management
Source components: EQUIPMENT.
Source record 10140013 at NHTSA30865
NHTSA communication ID: 10140004
NHTSA source summary · Original PDF not reviewed by Recallfolio
04589131AG, 04589243AG - Inspect and Return: Liftgate - Latch Assy You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 04589131AG, 04589243AG . See attachments for identifying suspect stock. Replacement part can be obtained by reordering the same part number. Please return suspect parts back to your facing depot using Return Code 02, before 7 April, 2016.
Source components: LATCHES/LOCKS/LINKAGES:HATCHBACK/LIFTGATE:LOCK · STRUCTURE:BODY:HATCHBACK/LIFTGATE.
Source record 10140004 at NHTSA9003694
NHTSA communication ID: 10217521
NHTSA source summary · Original PDF not reviewed by Recallfolio
Oil Pump Assembly If error code P06DD present on any Pentastar V6 application, please inspect oil pump for relief valve failure. See photo attached. If valve is found out of place please call Bob Jackson (248) 944-0466 bob.jackson@fcagroup.com, or Joe Lovell (734) 309-6467 joe.lovell@fcagroup.com before proceeding. If unable to reach after 15 minutes record the following information and proceed with oil pump replacement and hold part for return to FCA via Fastrack system
Source components: FUEL SYSTEM, GASOLINE.
Source record 10217521 at NHTSA9002977
NHTSA communication ID: 10217519
NHTSA source summary · Original PDF not reviewed by Recallfolio
Door latch Before replacing this part please contact Kevin Murphree at Cell (248) 613-3417 or Samantha Kallman (248)-576-1532. If you are unable to get a response within 15 minutes, please continue with the repair.
Source components: LATCHES/LOCKS/LINKAGES:DOORS:LATCH.
Source record 10217519 at NHTSA9003694
NHTSA communication ID: 10139989
NHTSA source summary · Original PDF not reviewed by Recallfolio
Oil Pump Assembly If error code P06DD present on any Pentastar V6 application, please inspect oil pump for relief valve failure. See photo attached. If valve is found out of place please call Bob Jackson (248) 944-0466 bob.jackson@fcagroup.com, or Joe Lovell (734) 309-6467 joe.lovell@fcagroup.com before proceeding. If unable to reach after 15 minutes record the following information and proceed with oil pump replacement and hold part for return to FCA via Fastrack system
Source components: ENGINE AND ENGINE COOLING.
Source record 10139989 at NHTSA9002977
NHTSA communication ID: 10139987
NHTSA source summary · Original PDF not reviewed by Recallfolio
Door latch Before replacing this part please contact Kevin Murphree at Cell (248) 613-3417 or Samantha Kallman (248)-576-1532. If you are unable to get a response within 15 minutes, please continue with the repair.
Source components: STRUCTURE:BODY:DOOR.
Source record 10139987 at NHTSA30657
NHTSA communication ID: 10140003
NHTSA source summary · Original PDF not reviewed by Recallfolio
R4801865AC Alternator Assy - 220 Amp You have been identified as either having stock, or have stock in transit to your dealership. Please return all stock of part number R4801865AC. Replacement is part number 04801865AE which is in stock and available. Please return suspect parts back to your facing depot using Return Code 02, before 04 April, 2017.
Source components: ELECTRICAL SYSTEM.
Source record 10140003 at NHTSA25-002-17
NHTSA communication ID: 10217557
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Dosing Control Unit Diagnostic And System Improvements This bulletin involves reprogramming the Dosing Control Unit (DCU) with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination specifically in cold weather. Upon further investigation, a technician may find the following Diagnostic Trouble Code (DTC): P207F - Reductant Quality Performance.
Source components: EXTERIOR LIGHTING.
Source record 10217557 at NHTSA25-002-17
NHTSA communication ID: 10140025
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Dosing Control Unit Diagnostic And System Improvements This bulletin involves reprogramming the Dosing Control Unit (DCU) with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination specifically in cold weather. Upon further investigation, a technician may find the following Diagnostic Trouble Code (DTC): P207F - Reductant Quality Performance.
Source components: ELECTRICAL SYSTEM.
Source record 10140025 at NHTSA9003216
NHTSA communication ID: 10217508
NHTSA source summary · Original PDF not reviewed by Recallfolio
Power Fold Rearview Mirror Prior to replacing this part for a loose mirror, please first follow this procedure to reset the pivot mechanism. Move the mirror to its full foward position and then to full retract position using the power fold mirror button located on drivers side door panel. Perform this procedure three times. If this doesn't resolve the issue, then repair as necessary.~ Note: 1- The looseness of power fold mirror does not necessary indicate a defective mirror, it may be caused by folding it manually rather than using the power fold feature. If the mirror is adjusted manually out of the proper detent, always use the button to adjust it back into sync.~ 2- The intended use of the power fold mirrors is by pushing the button to fold and unfold the mirror. Only manually fold the mirrors when absolutely necessary.~ 3- In the circumstance where the left hand mirror and right hand mirror are in different positions, it may take up to three cycles (bottom pushes) to re-sync the mirrors together.
Source components: VISIBILITY · VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR.
Source record 10217508 at NHTSA9003687
NHTSA communication ID: 10139978
NHTSA source summary · Original PDF not reviewed by Recallfolio
Restraints Remove I-Sheet from packaging. Correct information sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
Source components: SEAT BELTS.
Source record 10139978 at NHTSA9003216
NHTSA communication ID: 10139976
NHTSA source summary · Original PDF not reviewed by Recallfolio
Power Fold Rearview Mirror Prior to replacing this part for a loose mirror, please first follow this procedure to reset the pivot mechanism. Move the mirror to its full foward position and then to full retract position using the power fold mirror button located on drivers side door panel. Perform this procedure three times. If this doesn't resolve the issue, then repair as necessary.~ Note: 1- The looseness of power fold mirror does not necessary indicate a defective mirror, it may be caused by folding it manually rather than using the power fold feature. If the mirror is adjusted manually out of the proper detent, always use the button to adjust it back into sync.~ 2- The intended use of the power fold mirrors is by pushing the button to fold and unfold the mirror. Only manually fold the mirrors when absolutely necessary.~ 3- In the circumstance where the left hand mirror and right hand mirror are in different positions, it may take up to three cycles (bottom pushes) to re-sync the mirrors together.
Source components: VISIBILITY:REARVIEW MIRRORS/DEVICES.
Source record 10139976 at NHTSA25-001-17
NHTSA communication ID: 10217549
NHTSA source summary · Original PDF not reviewed by Recallfolio
Diesel Exhaust Fluid This bulletin provides information regarding the Diesel Exhaust Fluid (DEF) vehicle delivery fill guidelines.
Source components: FUEL SYSTEM, DIESEL · FUEL SYSTEM, GASOLINE.
Source record 10217549 at NHTSA25-001-17
NHTSA communication ID: 10140017
NHTSA source summary · Original PDF not reviewed by Recallfolio
Diesel Exhaust Fluid This bulletin provides information regarding the Diesel Exhaust Fluid (DEF) vehicle delivery fill guidelines.
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL · FUEL SYSTEM, DIESEL.
Source record 10140017 at NHTSAD-16-28 Rev. A
NHTSA communication ID: 10140011
NHTSA source summary · Original PDF not reviewed by Recallfolio
DAPAP Requirements - Addition of Exterior Mirrors (Rev. A)
Source components: VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR.
Source record 10140011 at NHTSA9003681
NHTSA communication ID: 10139985
NHTSA source summary · Original PDF not reviewed by Recallfolio
Restraints Information Sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
Source components: SEAT BELTS.
Source record 10139985 at NHTSA9003636
NHTSA communication ID: 10121830
NHTSA source summary · Original PDF not reviewed by Recallfolio
Rear View Camera For trucks equipped with rear view camera part number 68274731A$, if there is a complaint of the rear view camera being inoperative, or the radio screen is black or blue when the truck is in reverse, DO NOT replace the rear camera or perform any repairs until attempting to contact Michael Talbert in Engineering Cell (248) 464- 2043, Monday - Friday between 8am - 7pm EST. If your call is not returned within 15 minutes, proceed with the normal diagnostic process
Source components: BACK OVER PREVENTION: CAMERA SYSTEM.
Source record 10121830 at NHTSA18-115-16
NHTSA communication ID: 10121857
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Powertrain Diagnostic And System Improvements This bulletin involves reprogramming the Engine Control Module/Powertrain Control Module (ECM/PCM) with the latest available software. A customer may experience one or more of the following conditions: Unpleasant odor in the vehicle at low speeds and when regeneration is active. Intermittent no crank and no start (68RFE automatic transmission only). Unable to complete ?Fuel Pressure Override? test in the scan tool.In addition, the following software enhancements are also available: Improved fuel filter reminder calibration. Improved regeneration at low speeds. Updated accelerator pedal calibration to reduce hesitation. Calibration changes to reduce turbo inlet temperatures.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10121857 at NHTSA68158770
NHTSA communication ID: 10223866
NHTSA source summary · Original PDF not reviewed by Recallfolio
USB Charging Port Before replacing this part - this is a charge only USB port intended to charge smart phones and other low power USB devices. To verify proper functionality, turn on the ignition with no cables or devices plugged into the port. Connect a charging cable to the port, then connect the device. If the device receives power, the port is functioning to design. There are some minor compatibility issues with some charging cables including Apple Lightning cables. For questions regarding the charging port functionality, please call Dave Diovardi at Cell (248) 941-8704 or Rick Gordon at Cell (248) 630-6281.~
Source components: ELECTRICAL SYSTEM:WIRING:CONNECTORS/PLUGS:ACCESORY POWER OUTLET/JACK/PORT/USB/SAE/CIGARETTE LIGHTER.
Source record 10223866 at NHTSA68140664
NHTSA communication ID: 10223862
NHTSA source summary · Original PDF not reviewed by Recallfolio
A/C compressor Before replacing the AC compressor for noise or in-op. call one of the individuals below.~ Steve Rice at cell (248) 867 0061~ Mark Briolat at cell (248) 345-0127~ If no response in 15 minutes, please continue with repair.
Source components: VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM.
Source record 10223862 at NHTSA68234041
NHTSA communication ID: 10223861
NHTSA source summary · Original PDF not reviewed by Recallfolio
Thermal Expansion Valve (TXV), H-valve For D trucks only; When diagnosing an A/C system leak at the TXV (Thermal Expansion Valve, H-valve), do not replace the TXV unless it has been proven to be defective for function or for a leak. Instead replace just the O-ring(s) part number 05161806AA, 68046015AA, 68100682AA, 68100676AA. For any questions call Matt Mihm cell (248) 736-6542. If no response in 15 minutes, please continue with repair.~ ~___________________________________________________________________~ Contact us at CAGRIS@Chrysler.com for feedback related ONLY to this GPOP Tech Tip. Please include the Part Number(s) and Tech Tip Part Description of the Tech Tip you are referencing for our tracking system.
Source components: ENGINE AND ENGINE COOLING · VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM.
Source record 10223861 at NHTSA