Original record summaries, dates and identifiers for this model-year. Records 301–400 of 604, ordered newest first. Dated records on this page: May 26, 2016–Mar 17, 2017.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Mar 17, 2017Service Bulletin/Repair Instructions
30865
NHTSA communication ID: 10140004
NHTSA source summary · Original PDF not reviewed by Recallfolio
04589131AG, 04589243AG - Inspect and Return: Liftgate - Latch Assy You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 04589131AG, 04589243AG . See attachments for identifying suspect stock. Replacement part can be obtained by reordering the same part number. Please return suspect parts back to your facing depot using Return Code 02, before 7 April, 2016.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Oil Pump Assembly If error code P06DD present on any Pentastar V6 application, please inspect oil pump for relief valve failure. See photo attached. If valve is found out of place please call Bob Jackson (248) 944-0466 bob.jackson@fcagroup.com, or Joe Lovell (734) 309-6467 joe.lovell@fcagroup.com before proceeding. If unable to reach after 15 minutes record the following information and proceed with oil pump replacement and hold part for return to FCA via Fastrack system
NHTSA source summary · Original PDF not reviewed by Recallfolio
Door latch Before replacing this part please contact Kevin Murphree at Cell (248) 613-3417 or Samantha Kallman (248)-576-1532. If you are unable to get a response within 15 minutes, please continue with the repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Oil Pump Assembly If error code P06DD present on any Pentastar V6 application, please inspect oil pump for relief valve failure. See photo attached. If valve is found out of place please call Bob Jackson (248) 944-0466 bob.jackson@fcagroup.com, or Joe Lovell (734) 309-6467 joe.lovell@fcagroup.com before proceeding. If unable to reach after 15 minutes record the following information and proceed with oil pump replacement and hold part for return to FCA via Fastrack system
NHTSA source summary · Original PDF not reviewed by Recallfolio
Door latch Before replacing this part please contact Kevin Murphree at Cell (248) 613-3417 or Samantha Kallman (248)-576-1532. If you are unable to get a response within 15 minutes, please continue with the repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
R4801865AC Alternator Assy - 220 Amp You have been identified as either having stock, or have stock in transit to your dealership. Please return all stock of part number R4801865AC. Replacement is part number 04801865AE which is in stock and available. Please return suspect parts back to your facing depot using Return Code 02, before 04 April, 2017.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Auto Trans Rotary Electronic Shifter The rotary shifter is designed to actuate a motor within the device whenever the driver places their foot on the brake, with the car in Park (or Neutral). This generates a noise with each brake press/release. Therefore, even after replacing the shifter for a noise complaint, the replacement part will also have a characteristic noise generated whenever the driver steps on the brake. Before performing a repair procedure for a noise complaint, please perform a subjective analysis of the noise coming from the rotary shifter. If the shifter noise is deemed abnormal sound (has an uncharacteristic buzz or grind), please proceed with normal replacement procedure. If so equipped, record the sound with a handheld microphone, or cell phone, and if noise is above 54dB @ 30cm away from the knob, please proceed with normal replacement procedure. For any further questions, please contact Theodore Kahiya at cell (519) 300-2443.
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Power Fold Rearview Mirror Prior to replacing this part for a loose mirror, please first follow this procedure to reset the pivot mechanism. Move the mirror to its full foward position and then to full retract position using the power fold mirror button located on drivers side door panel. Perform this procedure three times. If this doesn't resolve the issue, then repair as necessary.~ Note: 1- The looseness of power fold mirror does not necessary indicate a defective mirror, it may be caused by folding it manually rather than using the power fold feature. If the mirror is adjusted manually out of the proper detent, always use the button to adjust it back into sync.~ 2- The intended use of the power fold mirrors is by pushing the button to fold and unfold the mirror. Only manually fold the mirrors when absolutely necessary.~ 3- In the circumstance where the left hand mirror and right hand mirror are in different positions, it may take up to three cycles (bottom pushes) to re-sync the mirrors together.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Auto Trans Rotary Electronic Shifter The rotary shifter is designed to actuate a motor within the device whenever the driver places their foot on the brake, with the car in Park (or Neutral). This generates a noise with each brake press/release. Therefore, even after replacing the shifter for a noise complaint, the replacementpart will also have a characteristic noise generated whenever the driver steps on the brake. Before performing a repair procedure for a noise complaint, please perform a subjective analysis of the noise coming from the rotary shifter. If the shifter noise is deemed abnormal sound (has an uncharacteristic buzz or grind), please proceed with normal replacement procedure. If so equipped, record the sound with a handheld microphone, or cell phone, and if noise is above 54dB @ 30cm away from the knob, please proceed with normal replacement procedure. For any further questions, please contact Theodore Kahiya at cell (519) 300-2443.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Power Fold Rearview Mirror Prior to replacing this part for a loose mirror, please first follow this procedure to reset the pivot mechanism. Move the mirror to its full foward position and then to full retract position using the power fold mirror button located on drivers side door panel. Perform this procedure three times. If this doesn't resolve the issue, then repair as necessary.~ Note: 1- The looseness of power fold mirror does not necessary indicate a defective mirror, it may be caused by folding it manually rather than using the power fold feature. If the mirror is adjusted manually out of the proper detent, always use the button to adjust it back into sync.~ 2- The intended use of the power fold mirrors is by pushing the button to fold and unfold the mirror. Only manually fold the mirrors when absolutely necessary.~ 3- In the circumstance where the left hand mirror and right hand mirror are in different positions, it may take up to three cycles (bottom pushes) to re-sync the mirrors together.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Water Pump For JK Bodies ONLY: If replacing the water pump for a chirp, squeal or NVH, please contact either: Nick Morand cell: (248) 410-5078 nick.morand@fcagroup.com Joe Lovell cell: (734) 309-6467 joe.lovell@fcagroup.com Engineering is seeking audio recordings of the concern in an effort to root cause and make necessary improvements to future pumps. Please email any audio recording or documentation of when/where/how the pump makes noise to the above emails. If the dealer is located in the Detroit Metro Area, Engineering may send a representative to review with technician. Any information is appreciated. If a response is not received within 15 mins , then proceed with the necessary repair. For JK and DS: Before replacing water pumps for noise issues the heat shield on the catalytic converter needs to be checked to make sure it is not the source of the noise. Check while the engine is fully warmed up. If the heat shield is found to be the source of the noise tighten the bolts and, or add shims/washers as needed.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: BCM Diagnostic And System Improvements This bulletin involves updating the Body Control Module (BCM) software. The customer may describe the headlamps flicker while operating at night. This condition may be more prevalent after the bulb(s) have been replaced with an aftermarket bulb.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Fuel Tank Issue Description: Ram 1500 built between 7/1/16 and 8/15/16 with concern of "hard to fill" or "premature shut off", please remove the Canister line and Recirculation Line and retest. If the condition continues, tank replacement may be required. Please reference the proper diagnostic materials. Answers to the following questions can assist Engineering in their quality improvements: 1) At what level of fuel in the Tank does the Hard to Fill condition exist? 2) When did the customer start experiencing Hard to Fill condition? 3) Did the condition exist in a particular fuel station? If tank replacement is needed, please contact Sylvia Lopez at Cell (248) 520-9734 prior to replacing the Tank. She will help arrange shipment of the tank back to the Quality Engineering Center. If no response within 15 minutes proceed with repairs
NHTSA source summary · Original PDF not reviewed by Recallfolio
Rear View Camera For trucks equipped with rear view camera part number 68274731A$, if there is a complaint of the rear view camera being inoperative, or the radio screen is black or blue when the truck is in reverse, DO NOT replace the rear camera or perform any repairs until attempting to contact Michael Talbert in Engineering Cell (248) 464- 2043, Monday - Friday between 8am - 7pm EST. If your call is not returned within 15 minutes, proceed with the normal diagnostic process
Source components: BACK OVER PREVENTION: CAMERA SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Water Pump Dealers are replacing water pumps because of a coolant leak. Water pumps are found TNF but the water pump bypass o-ring was pinched resulting in a coolant leak that looks like a failed pump. Please inspect the bypass o-ring before replacing the pump as it is available separate for service.
NHTSA source summary · Original PDF not reviewed by Recallfolio
TANK, Diesel Exhaust Fluid, Part Includes Temp Sensor and Level Sensor For DS and WK vehicles ONLY; If the urea tank is being replaced due to P249C, P203E, or P24F3 on a 2014-2016 model year 3.0L Turbo Diesel (EXF) on DS or WK, please call Indra Djutrisno at cell (248) 892-3473. If no response is received within 15 minutes, please continue with repair
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Remote Start Antenna Replacement This bulletin involves replacing the remote start antenna module. Some customers may experience a diminished or less than satisfactory range when trying to lock/unlock the doors or when using the remote start from the key fob. Some customers may also experience a Tire Pressure Monitoring (TPM) icon illuminated while all the tires are properly inflated.
NHTSA source summary · Original PDF not reviewed by Recallfolio
USB Charging Port Before replacing this part - this is a charge only USB port intended to charge smart phones and other low power USB devices. To verify proper functionality, turn on the ignition with no cables or devices plugged into the port. Connect a charging cable to the port, then connect the device. If the device receives power, the port is functioning to design. There are some minor compatibility issues with some charging cables including Apple Lightning cables. For questions regarding the charging port functionality, please call Dave Diovardi at Cell (248) 941-8704 or Rick Gordon at Cell (248) 630-6281.~
Source components: ELECTRICAL SYSTEM:WIRING:CONNECTORS/PLUGS:ACCESORY POWER OUTLET/JACK/PORT/USB/SAE/CIGARETTE LIGHTER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
A/C compressor Before replacing the AC compressor for noise or in-op. call one of the individuals below.~ Steve Rice at cell (248) 867 0061~ Mark Briolat at cell (248) 345-0127~ If no response in 15 minutes, please continue with repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Thermal Expansion Valve (TXV), H-valve For D trucks only; When diagnosing an A/C system leak at the TXV (Thermal Expansion Valve, H-valve), do not replace the TXV unless it has been proven to be defective for function or for a leak. Instead replace just the O-ring(s) part number 05161806AA, 68046015AA, 68100682AA, 68100676AA. For any questions call Matt Mihm cell (248) 736-6542. If no response in 15 minutes, please continue with repair.~ ~___________________________________________________________________~ Contact us at CAGRIS@Chrysler.com for feedback related ONLY to this GPOP Tech Tip. Please include the Part Number(s) and Tech Tip Part Description of the Tech Tip you are referencing for our tracking system.
Source components: ENGINE AND ENGINE COOLING · VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
RA3 And RA4 Radio Enhancements This bulletin involves inspecting and if required, updating the radio software. Customers may experience one or more of the following: Satellite radio reception improvements. Navigation failed message is displayed. Clock not automatically updating to local time. Poor or no connection to cellular network. (U.S. Market Only) (KL vehicles). Display goes blank/black. Radio locks up. Some Uconnect App remote commands do not execute with the vehicle. (U.S. Market Only)
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Radio Frequency Hub Module (RFHM) Enhancement This bulletin involves reprogramming the RFHM module with the latest available software. Customers may describe the instrument cluster is illuminating by itself after the ignition has been off for an extended period of time (10 minutes or more).
Source components: ELECTRICAL SYSTEM · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
NHTSA source summary · Original PDF not reviewed by Recallfolio
Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform the this inspection. Inspect the sensor for a fluid coating on the sensor pins. Orange colored rain repellant can cause this fluid build-up. Clean the pins, drain the reservoir, and fill with Mopar approved washer fluid. Check to determine if the issue has been resolved. Continue with repair if necessary. Also, please inform the customer not to use Rain-X in the system to avoid this issue. Please contact Chuck Hood at cell (248) 613-7591 if you have questions or need additional information. Thank you.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar® Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 N·m [21 ft. lbs.].
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Instrument Panel Cluster (IPC) Enhancement This bulletin involves updating the Instrument Panel software and updating Radio Frequency Hub Module (RFHM) software to latest version. The customer may describe one or more of the following: · Instrument cluster backlighting may start flickering. This usually occurs when the dimming is in the lower settings (high-line instrument panels only). · The cruise control set speed does not match the digital speedometer (BUX vehicles only).
Source components: ELECTRICAL SYSTEM · ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Engine Oil Viscosity Upgrade And Flash Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) and the Transmission Control Module (TCM). It also involves changing the engine oil with new 5W40 engine oil and applying a sticker to the engine oil filler cap. An addendum card will need to be added in the owner's manual. The following powertrain system improvements/enhancements are included in this software release: · Fan calibration. · Transmission calibration. · Revised oil change algorithm.
Source components: ELECTRICAL SYSTEM · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Engine Oil Viscosity Upgrade And Flash Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) and the Transmission Control Module (TCM). It also involves changing the engine oil with new 5W40 engine oil and applying a sticker to the engine oil filler cap. An addendum card will need to be added in the owner's manual. The following powertrain system improvements/enhancements are included in this software release: · Fan calibration. · Transmission calibration. · Revised oil change algorithm.
Source components: ENGINE · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tailgate Contacting Pickup Box Panel When Closing This bulletin involves adjusting the passenger side outer box flange. The customer may describe the tailgate making contact with the passenger side outer box panel.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tailgate Contacting Pickup Box Panel When Closing This bulletin involves adjusting the passenger side outer box flange. The customer may describe the tailgate making contact with the passenger side outer box panel.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tailgate Contacting Pickup Box Panel When Closing This bulletin involves adjusting the passenger side outer box flange. The customer may describe the tailgate making contact with the passenger side outer box panel.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Electric Power Steering Gear With Low Assist This bulletin involves replacing the electric power steering gear assembly. The customer may notice a low assist or excessive steering effort at lower speeds or parking lot maneuvers.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Thermostat Housing Replacement This bulletin involves inspecting the bleed screw on the thermostat housing and if necessary replacing the thermostat housing. The customer may describe a coolant leak at the thermostat housing bleed screw.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT ADAPTIVE/MOBILITY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Electric Power Steering Gear With Low Assist This bulletin involves replacing the electric power steering gear assembly. The customer may notice a low assist or excessive steering effort at lower speeds or parking lot maneuvers.
Source components: STEERING · STEERING:ELECTRIC POWER ASSIST SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Thermostat Housing Replacement This bulletin involves inspecting the bleed screw on the thermostat housing and if necessary replacing the thermostat housing. The customer may describe a coolant leak at the thermostat housing bleed screw.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Electric Power Steering Gear With Low Assist This bulletin involves replacing the electric power steering gear assembly. The customer may notice a low assist or excessive steering effort at lower speeds or parking lot maneuvers.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Thermostat Housing Replacement This bulletin involves inspecting the bleed screw on the thermostat housing and if necessary replacing the thermostat housing. The customer may describe a coolant leak at the thermostat housing bleed screw.
NHTSA source summary · Original PDF not reviewed by Recallfolio
P/N 68111384AB: Inspect &Return: Switch - Speed Control You have been identified as either having stock, or have stock in transit to your dealership. Please return parts which have a pacakging date code of July 20th 2016. Reference pictures attached for suspect part identification. Please return parts backto your facing depot using Return Code 02, before 31 August, 2016.
NHTSA source summary · Original PDF not reviewed by Recallfolio
05187880AC - Inspect and Return: Relay Assy - Heater Intake Air You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 05187880AC. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 31st August, 2016.
Source components: ENGINE · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Inspect and Return: Lamp Assy - Tail Light Rt/L You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of following part numbers: 68110016AC, 68110016AD, 68110016AE, 68110017AD, 68236104AC, 68236105AB. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 31 August, 2016.
NHTSA source summary · Original PDF not reviewed by Recallfolio
P/N 04573460 - Inspect &Return: Rocker Assy - Intake Valve RT You have been identified as either having stock, or have stock in transit to your dealership. Please return part number 04573460 which have a packaging date of 2016-06-13. Reference attached picture for reference. Please return suspect parts back to your facing depot using Return Code 02, before 29 August, 2016.
NHTSA source summary · Original PDF not reviewed by Recallfolio
68103256AGReturn: Line Assy - A/C Suction and Liquid You have been identified as either having stock, or have stock in transit to your dealership. Please return stock of part number 68103256AG packaged before 2016/08/01. Please return suspect parts back to your facing depot using Return Code 02, before 29 August, 2016.
NHTSA source summary · Original PDF not reviewed by Recallfolio
68160775AB: Inspect and Return: Switch - Outside Door Handle You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 68160775AB. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 26 August, 2016.
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Thermostat Housing Replacement This bulletin involves inspecting the bleed screw on the thermostat housing and if necessary replacing the thermostat housing. The customer may describe a coolant leak at the thermostat housing bleed screw."
Source components: ENGINE AND ENGINE COOLING:COOLING SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Transmission Torque Converter Replacement Due To Dislodged Snap Ring This bulletin involves replacing the torque converter after verifying that an internal snap ring has dislodged. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC) set in the Transmission Control Module (TCM) memory: · P2757-00 - TCC Pressure Control Solenoid Control Circuit Performance."
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
"FLASH: TRANSMISSION SHIFT AND DRIVABILITY ENHANCEMENTS THIS BULLETIN INVOLVES REPROGRAMMING THE TRANSMISSION CONTROL MODULE (TCM) WITH THE LATEST AVAILABLE SOFTWARE. SOME CUSTOMERS MAY EXPERIENCE A MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATION. UPON FURTHER INVESTIGATION, A TECHNICIAN MAY FIND THE FOLLOWING DIAGNOSTIC TROUBLE CODE (DTC) STORED IN THE TCM MEMORY: · P0731 - GEAR RATIO ERROR IN 1ST. THE FOLLOWING ENHANCEMENTS ARE INCLUDED IN THE SOFTWARE UPDATE: · **2-1 COAST DOWN IMPROVEMENT (3.0L ONLY). · 3-2 COAST DOWN IMPROVEMENT (3.0L ONLY). · IMPROVEMENT TO 5-3 DOWNSHIFT WITH PEDAL TO IMPROVE 5-3-2 SHIFT (3.0L ONLY) · 6-5 COAST DOWN IMPROVEMENT (3.0L ONLY) · 2-3 UPSHIFT WITH LESS THAN 30% PEDAL IMPROVEMENT (3.0L ONLY) · CLUTCH C ADAPTION STABILITY IMPROVEMENT (IMPROVES SHIFT QUALITY FOR NEW TRANSMISSIONS ON GEAR SHIFTS THAT USE CLUTCH C) (3.0L ONLY). · GARAGE SHIFT TO D IMPROVEMENTS (3.0L ONLY). · ROLLING GARAGE SHIFT IMPROVEMENTS (3.0L ONLY). · IMPLEMENTATION OF END OF LINE (EOL) ADAPTION TO IMPROVE SHIFT QUALITY ON BRAND NEW TRANSMISSION. · DIAGNOSTICS IMPROVEMENTS (3.6L AND 5.7L). · IMPROVE SHIFT QUALITY ON BRAND NEW TRANSMISSION (5.7L ONLY). · IMPROVEMENT TO FIRST 1-2 SHIFT AFTER START (5.7L ONLY). · IMPROVEMENT TO 1-2 SHIFT, ESPECIALLY FOR COLDER OPERATING TEMPERATURES (5.7L ONLY). · 2-3 SHIFT FEEL IMPROVEMENT ESPECIALLY FOR COLDER OPERATING TEMPERATURES (5.7L ONLY). · COASTDOWN SHIFT IMPROVEMENTS (6-5, 5-4, 4-3, 3-2, 2-1) (5.7L ONLY). · COASTDOWN SHIFT FEEL REFINEMENT FOR DOUBLE DOWNSHIFTS (5.7L ONLY). · KICKDOWN IMPROVEMENTS FOR THE FOLLOWING SHIFTS (7-6-5-4-3, 8-6-5-4, 6-3-2, 5-3-2, 4-2) (5.7L ONLY). · IMPROVEMENT TO 4-2-1 (5.7L ONLY).** · IMPROVED 7TH GEAR UPSHIFT TIMING. · DOWNHILL ENGINE BRAKING IMPROVEMENTS."
Source components: ELECTRICAL SYSTEM:SOFTWARE · POWER TRAIN:AUTOMATIC TRANSMISSION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Engine Oil Viscosity Upgrade And Flash Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) and the Transmission Control Module (TCM). It also involves changing the engine oil with new 5W40 engine oil and applying a sticker to the engine oil filler cap. An addendum card will need to be added in the owner's manual. The following powertrain system improvements/enhancements are included in this software release: · Fan calibration. · Transmission calibration. · Revised oil change algorithm.
Source components: ELECTRICAL SYSTEM · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Engine Oil Viscosity Upgrade And Flash Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) and the Transmission Control Module (TCM). It also involves changing the engine oil with new 5W40 engine oil and applying a sticker to the engine oil filler cap. An addendum card will need to be added in the owner's manual. The following powertrain system improvements/enhancements are included in this software release: · Fan calibration. · Transmission calibration. · Revised oil change algorithm.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Engine Oil Viscosity Upgrade And Flash Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) and the Transmission Control Module (TCM). It also involves changing the engine oil with new 5W40 engine oil and applying a sticker to the engine oil filler cap. An addendum card will need to be added in the owner's manual. The following powertrain system improvements/enhancements are included in this software release: · Fan calibration. · Transmission calibration. · Revised oil change algorithm.
Source components: ELECTRICAL SYSTEM · ENGINE · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
TANK, Diesel Exhaust Fluid, Part Includes Temp Sensor and Level Sensor For DS and WK vehicles ONLY; If the urea tank is being replaced due to P249C or P203E on a 2014-2016 model year 3.0L Turbo Diesel (EXF) on DS or WK, please call Indra Djutrisno at cell (248) 892-3473. If no response is received within 15 minutes, please continue with repair.~
NHTSA source summary · Original PDF not reviewed by Recallfolio
Bumper Step Pad Customer may notice the center section of the step pad is not sitting flat. It will appear raised either left or right of center. Please photograph the condition, measure the gap between the bumper and step pad. Then contact Mihaela Colfescu via cell (248) 841-5736 with this information. We may want to have the whole bumper assembly returned for study. ~ If the dealership is within the Metro Detroit Area, Mihaela would like to analyze the vehicle in person prior to repair. ~ If the dealership is not close, please take pictures and a detailed description of what is causing the issue including where on the Step Pad the issue is occurring. If Mihaela does not return the call within 15 minutes please gather the requested information and proceed with the repair. Information can be emailed to mihaela.colfescu@fcagroup.com
NHTSA source summary · Original PDF not reviewed by Recallfolio
MY16 RA3 & RA4 Replacement Radios All MY16 RA3 and RA4 replacement radios must be ordered through the exchange process at United Radio. DO NOT order a NEW radio from Mopar. Go back and order a "Z" level part number. (example: Z8249986A$) The MY16 replacement radios must be reconfigured by United Radio to the wireless network provider in order for Uconnect Apps to work properly.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs: · **P2299 - Brake Pedal Position/Accelerator Pedal Position Incompatible.** · P0335 - Crankshaft Position Sensor Circuit. · P2610 - PCM Internal Engine Off Timer Performance (5.7L Engine). · P0456 - EVAP System Small Leak. · P1D73 - Active Grill Shutter (AGS) Performance. In addition to the above DTCs, this software release also includes: · Improved shift quality during initial operations of a vehicle in cold ambient temperatures (5.7L Engine). · Improved key-on engine-off oil pressure lamp behavior.
Source components: ELECTRICAL SYSTEM · ENGINE · SERVICE BRAKES, HYDRAULIC.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Rear seat fold latches If the rear seat is difficult to fold or binds, please contact Trevor Trudell at cell (248) 420-7340 before making any repair. If no response within 15 minutes please proceed with the repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Intake Manifold Gasket Intake Manifold Gaskets on Pentastar Upgrade (Sales Code ERC/ERF) are reusable provided they are not cut, torn or melted. The gaskets are not required by warranty to be replaced like they are on Pentastar Classic (ERB/EHB). The new gaskets are not interchangeable with Pentastar Classic Intake Manifold Gaskets.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Front Seat Adjuster Assemblies If the seat has a squeak or rattle, and it is reproducible, please call Trevor Trudell at cell (248) 420-7340 before any work is performed. If no response within 15 minutes please proceed with repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Brake Pedal Sensor For DS, WD & WK bodies ONLY; Prior to replacing the brake sensor; Please call Salma Al Ryahi at cell (519) 992-7293. If you are unable to get a response within 15 minutes, please take a picture that shows the sensor side together with the plunger and continue with normal repair procedure.
Source components: SERVICE BRAKES, HYDRAULIC · SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:WHEEL SPEED SENSOR/TONE RING.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Keyfob 2016 Vehicle Keyfobs with Passive Entry Keyless Go Feature - Engineering is investigating a keyfob unable to program or no function or low keyfob coin battery condition.~ Prior to replacing keyfob on MY16 vehicles, please contact Raja Charabuddi on cell (248) 202-7313. If no response within 15 minutes, proceed with repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Anti-Lock Brake Module (ABS) For 2015 and 2016 DS ONLY; Before replacing the ABS module, please call Brittany Potton at cell (248) 494-1087. If you don't receive response within 15 minutes, please continue with normal repair procedure.
Source components: ELECTRICAL SYSTEM · SERVICE BRAKES, AIR:ANTILOCK:CONTROL UNIT/MODULE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
RamBox Lid Left Applique Loose This bulletin involves inspecting and if necessary, replacing the affected 6`4? RamBox lid applique. The customer may describe what appears to be a gap between the left applique and the RamBox lid. Applique may separate at lid, due to insufficient adhesive bond strength.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Incorrectly Installed Rear Brake Caliper This bulletin involves inspecting both rear brake caliper hoses for being kinked or rubbing. Some vehicles may have been built with the rear brake caliper installed 360° incorrectly onto the caliper adapter mounting bracket.
Source components: SERVICE BRAKES, AIR:DISC:CALIPER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Anti-Lock Brake Module (ABS) For 2015 and 2016 DS ONLY; Before replacing the ABS module, please call Brittany Potton at cell (248) 494-1087. If you don't receive response within 15 minutes, please continue with normal repair procedure.
Source components: ELECTRICAL SYSTEM · SERVICE BRAKES, AIR:ANTILOCK:CONTROL UNIT/MODULE · SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
RamBox Lid Left Applique Loose This bulletin involves inspecting and if necessary, replacing the affected 6`4? RamBox lid applique. The customer may describe what appears to be a gap between the left applique and the RamBox lid. Applique may separate at lid, due to insufficient adhesive bond strength.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Incorrectly Installed Rear Brake Caliper This bulletin involves inspecting both rear brake caliper hoses for being kinked or rubbing. Some vehicles may have been built with the rear brake caliper installed 360° incorrectly onto the caliper adapter mounting bracket.
NHTSA source summary · Original PDF not reviewed by Recallfolio
"INCORRECTLY INSTALLED REAR BRAKE CALIPER THIS BULLETIN INVOLVES INSPECTING BOTH REAR BRAKE CALIPER HOSES FOR BEING KINKED OR RUBBING. SOME VEHICLES MAY HAVE BEEN BUILT WITH THE REAR BRAKE CALIPER INSTALLED 360° INCORRECTLY ONTO THE CALIPER ADAPTER MOUNTING BRACKET."
Source components: SERVICE BRAKES · SERVICE BRAKES, AIR:DISC:CALIPER · SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
"RAMBOX LID LEFT APPLIQUE LOOSE THIS BULLETIN INVOLVES INSPECTING AND IF NECESSARY, REPLACING THE AFFECTED 6`4 RAMBOX LID APPLIQUE. THE CUSTOMER MAY DESCRIBE WHAT APPEARS TO BE A GAP BETWEEN THE LEFT APPLIQUE AND THE RAMBOX LID. APPLIQUE MAY SEPARATE AT LID, DUE TO INSUFFICIENT ADHESIVE BOND STRENGTH."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"ANTI-LOCK BRAKE MODULE (ABS) FOR 2015 AND 2016 DS ONLY; BEFORE REPLACING THE ABS MODULE, PLEASE CALL BRITTANY POTTON AT CELL (248) 494-1087. IF YOU DON'T RECEIVE RESPONSE WITHIN 15 MINUTES, PLEASE CONTINUE WITH NORMAL REPAIR PROCEDURE."
NHTSA source summary · Original PDF not reviewed by Recallfolio
You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 68143886AA. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 11 July, 2016. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
NHTSA source summary · Original PDF not reviewed by Recallfolio
You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 68174065AE. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 11 July, 2016. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
NHTSA source summary · Original PDF not reviewed by Recallfolio
You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 04685719AI. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 11 July, 2016. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 3.6L and 5.7L Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs): · **P0335 - Crankshaft Position Sensor Circuit. · P2610 - PCM Internal Engine Off Timer Performance. (5.7L only).** · P0456 - EVAP System Small Leak. · P1D73 - Active Grill Shutter (AGS) Performance. **In addition to the above DTCs, this software release also includes: · Improved shift quality during initial operations of a vehicle in cold ambient temperatures. (5.7L only). · Improved key-on engine-off oil pressure lamp behavior.**
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: 3.6L and 5.7L Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs): · **P0335 - Crankshaft Position Sensor Circuit. · P2610 - PCM Internal Engine Off Timer Performance. (5.7L only).** · P0456 - EVAP System Small Leak. · P1D73 - Active Grill Shutter (AGS) Performance. **In addition to the above DTCs, this software release also includes: · Improved shift quality during initial operations of a vehicle in cold ambient temperatures. (5.7L only). · Improved key-on engine-off oil pressure lamp behavior.**
Source components: ELECTRICAL SYSTEM · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
"FLASH: 3.6L AND 5.7L POWERTRAIN DIAGNOSTIC AND SYSTEM ENHANCEMENTS THIS BULLETIN INVOLVES REPROGRAMMING THE POWERTRAIN CONTROL MODULE (PCM) WITH THE LATEST AVAILABLE SOFTWARE. SOME CUSTOMERS MAY EXPERIENCE A MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATION. UPON FURTHER INVESTIGATION THE TECHNICIAN MAY FIND ONE OR MORE OF THE FOLLOWING DIAGNOSTIC TROUBLE CODES (DTCS): · **P0335 - CRANKSHAFT POSITION SENSOR CIRCUIT. · P2610 - PCM INTERNAL ENGINE OFF TIMER PERFORMANCE. (5.7L ONLY).** · P0456 - EVAP SYSTEM SMALL LEAK. · P1D73 - ACTIVE GRILL SHUTTER (AGS) PERFORMANCE. **IN ADDITION TO THE ABOVE DTCS, THIS SOFTWARE RELEASE ALSO INCLUDES: · IMPROVED SHIFT QUALITY DURING INITIAL OPERATIONS OF A VEHICLE IN COLD AMBIENT TEMPERATURES. (5.7L ONLY). · IMPROVED KEY-ON ENGINE-OFF OIL PRESSURE LAMP BEHAVIOR.**"
Source components: ELECTRICAL SYSTEM:SOFTWARE · POWER TRAIN:AUTOMATIC TRANSMISSION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
You have been identified as either having stock, or have stock in transit to your dealership. Please return all stock of following part numbers: 68141880AH, 68141881AH, 68145625AI, 68145626AI, 68189480AF and replacement part numbers are 68141880AI, 68141881AI, 68145625AJ, 68145626AJ & 68189480AG respectively,which arein stockand available. Please return suspect parts back to your facing depot using Return Code 02, before 05 July, 2016. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
NHTSA source summary · Original PDF not reviewed by Recallfolio
You have been identified as either having stock, or have stock in transit to your dealership. Please return all stock of following part number: 05278632AF and replacement part number is 52030379AA which isin stockand available. Please return suspect parts back to your facing depot using Return Code 02, before 05 July, 2016. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
NHTSA source summary · Original PDF not reviewed by Recallfolio
You have been identified as either having stock, or have stock in transit to your dealership. Please return all stock of following part numbers: 1YG06JSCAC, 1YG06KEPAC, 1YG 06KFSAC, 1YG 06KGZAC, 1YG 06KBUAC and replacement part numbers are 1YG 1YG06KFSAD, 1YG 06KG ZAD, 1YG 06KBUAE respectively,which arein stockand available. Please return suspect parts back to your facing depot using Return Code 02, before 05 July, 2016. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
NHTSA source summary · Original PDF not reviewed by Recallfolio
You have been identified as either having stock, or have stock in transit to your dealership. Please return all stock of following part number: 68188889AE and replacement part number is 68188889AF which isin stockand available. Please return suspect parts back to your facing depot using Return Code 02, before 05 July, 2016. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Return: ALTERNATOR - ENGINE You have been identified as either having stock, or have stock in transit to your dealership. Please return all stock of following part numbers: R4801313AC replacement part number are 04801313AD respectively which are in stock and available. Please return suspect parts back to your facing depot using Return Code 02, before 8 July, 2016. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com
Source components: ENGINE · ENGINE AND ENGINE COOLING.
NHTSA source summary · Original PDF not reviewed by Recallfolio
You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of following part numbers: 68036213AA, 68036230AF, 68158196AC, 68158197AD, & 68158454AD. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 30 June, 2016. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
NHTSA source summary · Original PDF not reviewed by Recallfolio
68085119AE,Inspect and Return: Exhaust Pipe Assy - Frt W/Catalytic Converter You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 68085119AE. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 30 June, 2016. Return any open orders in process too. Direct all questions via email to mopardmail@fcagroup.com.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Ignition Node Module Replacement This bulletin involves replacing the ignition node module. Some customers may experience a no start issue when turning the key fob in the ignition node module(Fig. 1).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Ignition Node Module Replacement This bulletin involves replacing the ignition node module. Some customers may experience a no start issue when turning the key fob in the ignition node module(Fig. 1).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Integrated Center Stack If vehicle is found within 50 mile radius of the Detroit Metro area please hold vehicle and contact:~ Contact one of the following:~ Daniel Acciacca CELL (586) 709-1537~ Michael Savich CELL (248) 214-7270~ Ayed Hadaad CELL (248) 941-8707~ Issue: On a 2015 & 2016MY LA (Challenger), LD(Charger) and LX (300), the Integrated Center Stack (ICS) may experience a lock-up/Inop condition (complete loss of functionality) during any vehicle diagnostic session (reading fault codes, clearing fault codes, reflashing of any module, etc.). If this occurs, do not replace the ICS. The module functionality can be restored if it is reset by disconnecting power to it (by removing fuse, battery disconnect or module connector disconnect).~
NHTSA source summary · Original PDF not reviewed by Recallfolio
A/C Compressor This applies to 2015 and 2016 UF and PF. Before replacing the AC compressor for noise, leaks , or in-op:~ After these questions have been answered please call one of the individuals below.~ Stev at cell (248) 867-0061~ Mark Briolat at cell (248) 345-0127~ If no response in 15 minutes, please continue with repair.~ 1) Check all AC plumbing connection for leaks with UV light. Any leaks found?~ 2) Does compressor pulley and clutch hub turn freely, or are they seized?~ 3) What was the amount of the recovered refrigerant?~ After these questions have been answered please call one of the individuals below.~ Stev at cell (248) 867-0061~ Mark Briolat at cell (248) 345-0127~ If no response in 15 minutes, please continue with repair.~ If the compressor is replaced, then:~ 4) Drain oil from compressor. What was quantity of oil recovered?
NHTSA source summary · Original PDF not reviewed by Recallfolio
Hands Free Module - CTM ? Peiker For RT, JK and MK bodies only; Before replacing the Hands Free Module (HFM), please contact Gaurav Saxena at cell (248) 260-0583~ IMPORTANT - do not reset the HFM, clear codes or perform a battery reset before calling. Engineering is currently root causing this issue and your assistance is greatly appreciated. Seeking vehicles with HFM in a locked state, inoperative, or offline. If unable to reach this person within 15 minutes, then proceed with the necessary repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Battery - Transmitter For vehicles within 12 Months in Service which have a "FOB Battery Low" message within Cluster or DTC B1A10 or B1A11 Active or Stored. Engineering is requesting complete FOB returned unopened (ie, battery not removed or FOB housing opened!). ~ All others, follow normal procedures.~ Please ensure Dealer Technicians are aware of this request to allow for gain in FOB Battery depletion understanding.
NHTSA source summary · Original PDF not reviewed by Recallfolio
9-spd Transmission: FOR NAFTA Market Only: If you are ordering this transmission please follow all wiTECH pop ups and Warranty Payment Guidelines. If this vehicle contains 1 of the 30 Diagnostic Codes in the 9 Speed Tutorial located on the Service Home Page then please follow the repair steps and submit a Topology report as well as a Vehicle Scan Report with the Warranty Claim.~
NHTSA source summary · Original PDF not reviewed by Recallfolio
Speakers: For 2016 speakers issues (all bodies), before replacing this part please contact one of the following people regarding this repair: Mahmoud (Mo) Touha at cell (248) 705-3934. If no response is received within 15 minutes, then please proceed with repair.~
NHTSA source summary · Original PDF not reviewed by Recallfolio
Power Fold Rearview Mirror Prior to replacing this part for a loose mirror, please first follow this procedure to reset the pivot mechanism. Move the mirror to its full forward position and then to full retract position using the power fold mirror button located on drivers side door panel. Perform this procedure three times. If this doesn't resolve the issue, then repair as necessary.~ Note: 1- The looseness of power fold mirror does not necessary indicate a defective mirror, it may be caused by folding it manually rather than using the power fold feature. If the mirror is adjusted manually out of the proper detent, always use the button to adjust it back into sync.~ 2- The intended use of the power fold mirrors is by pushing the button to fold and unfold the mirror. Only manually fold the mirrors when absolutely necessary.~ 3- In the circumstance where the left hand mirror and right hand mirror are in different positions, it may take up to three cycles (bottom pushes) to re-sync the mirrors together.
NHTSA source summary · Original PDF not reviewed by Recallfolio
9-spd Transmission: FOR NAFTA Market Only: If you are ordering this transmission please follow all wiTECH pop ups and Warranty Payment Guidelines. If this vehicle contains 1 of the 30 Diagnostic Codes in the 9 Speed Tutorial located on the Service Home Page then please follow the repair steps and submit a Topology report as well as a Vehicle Scan Report with the Warranty Claim.~
NHTSA source summary · Original PDF not reviewed by Recallfolio
Speakers: For 2016 speakers issues (all bodies), before replacing this part please contact one of the following people regarding this repair: Mahmoud (Mo) Touha at cell (248) 705-3934. If no response is received within 15 minutes, then please proceed with repair.~
NHTSA source summary · Original PDF not reviewed by Recallfolio
Power Fold Rearview Mirror Prior to replacing this part for a loose mirror, please first follow this procedure to reset the pivot mechanism. Move the mirror to its full forward position and then to full retract position using the power fold mirror button located on drivers side door panel. Perform this procedure three times. If this doesn't resolve the issue, then repair as necessary.~ Note: 1- The looseness of power fold mirror does not necessary indicate a defective mirror, it may be caused by folding it manually rather than using the power fold feature. If the mirror is adjusted manually out of the proper detent, always use the button to adjust it back into sync.~ 2- The intended use of the power fold mirrors is by pushing the button to fold and unfold the mirror. Only manually fold the mirrors when absolutely necessary.~ 3- In the circumstance where the left hand mirror and right hand mirror are in different positions, it may take up to three cycles (bottom pushes) to re-sync the mirrors together.
Source components: PARKING BRAKE · POWER TRAIN · VISIBILITY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
9-spd Transmission: FOR NAFTA Market Only: If you are ordering this transmission please follow all wiTECH pop ups and Warranty Payment Guidelines. If this vehicle contains 1 of the 30 Diagnostic Codes in the 9 Speed Tutorial located on the Service Home Page then please follow the repair steps and submit a Topology report as well as a Vehicle Scan Report with the Warranty Claim.~
NHTSA source summary · Original PDF not reviewed by Recallfolio
Power Fold Rearview Mirror Prior to replacing this part for a loose mirror, please first follow this procedure to reset the pivot mechanism. Move the mirror to its full forward position and then to full retract position using the power fold mirror button located on drivers side door panel. Perform this procedure three times. If this doesn't resolve the issue, then repair as necessary.~ Note: 1- The looseness of power fold mirror does not necessary indicate a defective mirror, it may be caused by folding it manually rather than using the power fold feature. If the mirror is adjusted manually out of the proper detent, always use the button to adjust it back into sync.~ 2- The intended use of the power fold mirrors is by pushing the button to fold and unfold the mirror. Only manually fold the mirrors when absolutely necessary.~ 3- In the circumstance where the left hand mirror and right hand mirror are in different positions, it may take up to three cycles (bottom pushes) to re-sync the mirrors together.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Center Console Lid Binding This bulletin involves adding a rubber bumper to the console lid to prevent the lid from binding. **This bulletin will help prevent a binding or an audible clicking noise in the center console lid. NOTE: Do not attempt to fix a center console lid that has an existing binding or audible condition by adding the bumper.**