Original record summaries, dates and identifiers for this model-year. Records 101–117 of 117, ordered newest first. Dated records on this page: Apr 9, 2018–Jul 23, 2019.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Jul 23, 2019Service Bulletin/Repair Instructions
PC708 2019 LEAF
NHTSA communication ID: 10163720
NHTSA source summary · Original PDF not reviewed by Recallfolio
LEAF Radiator ***** Detailed Information ***** Nissan is committed to a high level of customer service and satisfaction. This commitment requires Nissan to periodically place certain vehicles on temporary Quality Assurance (QA) Hold to assure that these vehicles, as delivered to our customers, meet our exacting standards and our customers? expectations. Effective immediately, Nissan is placing a temporary Quality Assurance (QA) Hold on nine (9) specific MY2019 LEAF vehicles in dealer inventory. Due to a manufacturing assembly issue, that has since been corrected, the radiator may have been damaged during assembly. Nissan engineering is studying this concern and will provide the appropriate field action as quickly as possible. ***** What Dealers Should Do ***** PLEASE FOLLOW THE ATTACHED REPAIR INSTRUCTIONS: 1. Verify if vehicles are affected by this quality hold using Service Comm or DBS National Service History ? Open Campaigns I.D. PC708 - New vehicles in dealer inventory can be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). - Refer to NPSB 15-460 for additional information - Please continue to check newly arriving inventory for campaign applicability. 2. Please do not drive, sell or trade the specific vehicles in Dealer Inventory subject to this Quality Hold. 3. No further action is necessary at this time. Nissan will provide an updated status by no later than the week of August 5, 2019.
Source components: ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
VOLUNTARY SERVICE CAMPAIGN 2011-2019 LEAF; LITHIUM-ION BATTERY BONDING PLATES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2018-2019 LEAF; LITHIUM-ION BATTERY WILL NOT QUICK CHARGE This bulletin applies only to vehicles equipped with a 40kWh lithium-ion battery. IF YOU CONFIRM The customer states their vehicle will not charge with a quick charge setting after many back-to-back quick charges Or It takes too long to charge with a quick charge setting. NOTE: - DTC U1009-96 (Quick charger comm [Quick charger communication]) may be stored. - This issue applies to vehicles equipped with a 40 kWh lithium-ion battery only. ACTION Refer to step 20 under SERVICE PROCEDURE to confirm this bulletin applies to the vehicle being worked on. - If this bulletin applies, reprogram the lithium battery controllers (LBC) for HV BATTERY 2 and HV BATTERY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Lithium-ion Battery Bonding Plate Voluntary Service Campaign ***** Campaign Summary***** Nissan is committed to the safety, security and satisfaction of our customers and their passengers, as well as the safety of Nissan technicians. Nissan will be conducting a voluntary service campaign in North America on certain MY 2011-19 Nissan LEAF vehicles to replace the Lithium-ion Battery Bonding Plates. The plates may corrode and in areas where road salt is extensively used, could break. In rare cases during vehicle servicing in which both plates fail, the battery cover plate is removed and the vehicle is left in READY mode, a technician could be exposed to electric shock if all EV servicing safety instructions are not followed. Although no such incidents have been reported to Nissan, this voluntary service campaign is being conducted as a preventative measure out of an abundance of caution. The issue does not affect battery or vehicle performance. ***** What Dealers Should Do ***** 1. Verify if vehicles are affected by this Voluntary Service Campaign using Service Comm or DBS National Service History ? Open Campaigns I.D. P9312. - New vehicles in dealer inventory can be also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). - Refer to NPSB 15-460 for additional information 2. Dealers are requested to repair any affected vehicles in dealer new or pre-owned inventory to ensure customer satisfaction. 3. Dealers should use NTB19-055 to remedy any vehicles subject to this campaign. 4. Once repaired, dealers should submit the claim, using the claims coding provided, and release the vehicle.
NHTSA source summary · Original PDF not reviewed by Recallfolio
VOLUNTARY SERVICE CAMPAIGN 2011-2019 LEAF; LITHIUM-ION BATTERY BONDING PLATES This bulletin applies to 2018-2019 vehicles equipped with a 40kWh lithium-ion battery. INTRODUCTION Nissan is conducting this voluntary service campaign on certain specific model year 2011-2019 LEAF vehicles to replace the Lithium-Ion battery bonding plates. This service will be performed at no charge to the customer for parts or labor. IDENTIFICATION NUMBER Nissan has assigned identification number P9312 to this campaign. This number must appear on all communication and documentation of any nature dealing with this campaign. DEALER RESPONSIBILITY Dealers are to repair vehicles falling within range of this campaign that enter the service department. This includes vehicles purchased from private parties, vehicles presented by transient (tourists) owners, and vehicles in a dealer?s inventory.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2019 LEAF; WILL NOT SHIFT OUT OF PARK AND ERROR MESSAGE DISPLAYED IF YOU CONFIRM The vehicle will not shift out of Park (P), And There is the message on the instrument panel, ?When Parked Apply Parking Brake?, And DTC P189A (Motor ?A? Circuit Low) is stored as current and will not erase, And Terminal 1 and/or terminal 2, inside connector E54, are loose. See Figure 2 on the next page and step 3 on page 3. NOTE: The Parking Actuator Relay "A" plugs into connector E54 in the relay box. ACTION 1. Replace the Parking Actuator Relay ?A? harness connector.
Source components: ELECTRICAL SYSTEM · POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL).
NHTSA source summary · Original PDF not reviewed by Recallfolio
TELEMATICS SERVICE INFORMATION This bulletin applies only to vehicles equipped with a Telematics Communication Unit (TCU). This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NHTSA source summary · Original PDF not reviewed by Recallfolio
AEB WARNING LIGHT BLINKING This bulletin applies only to vehicles equipped with a lane camera. SERVICE INFORMATION If the AEB warning light is blinking (but not illuminated steadily) or the customer states it is blinking, and there are no related DTCs, inspect the windshield. A blinking AEB warning light may occur under the following conditions: - When contamination or foreign material adhere to the lane camera viewing window on the windshield - When driving while it is snowing or when frost forms on the lane camera viewing window on the windshield - When the lane camera viewing window on the windshield is temporarily fogged up NOTE: - If DTCs are present in any of the following related systems: - Laser/Radar, - ICC/ADAS, or - Lane Camera, Refer to the related Electronic Service Manual (ESM) for diagnosis. - Refer to the following pages for further information.
Source components: LANE DEPARTURE · LANE DEPARTURE: SENSING SYSTEM: CAMERA · LANE DEPARTURE: SENSING SYSTEM: LIDAR.
NHTSA source summary · Original PDF not reviewed by Recallfolio
LEAF Instrument Panel Dealer Inventory *****Dealer Announcement***** Nissan is conducting a quality action to replace the instrument panel on 153 specific 2019 LEAF (ZE1) vehicles identified in Service Comm. The passenger side front airbag tear seams on the instrument panels in the affected vehicles may be out of design specification. Affected vehicles are subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. *****What Dealers Should Do***** PLEASE FOLLOW THE ATTACHED REPAIR INSTRUCTIONS: 1. Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History ? Open Campaigns I.D. PC685 - New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). - Refer to NPSB 15-460 for additional information - Please continue to check newly arriving inventory for campaign applicability. 2. Dealers must use the attached procedure to replace the instrument panel on any vehicle subject to this quality action before retail delivery of the vehicle. 3. Nissan will automatically ship an instrument panel to dealers with affected vehicles either in stock or in-transit. Dealers do not need to order parts. - Please refer to the automatic parts shipment list included with this announcement for estimated parts shipment arrival timing. 4. The service department should submit the applicable warranty claim for the action performed so it can be closed on Service Comm and release the vehicle. ***** Dealer Responsibility ***** It is the dealer?s responsibility to check Service Comm or DBS National Service History ? Open Campaign using the appropriate campaign I.D for the inspection status on each affected vehicle currently in new vehicle inventory.
NHTSA source summary · Original PDF not reviewed by Recallfolio
NISSAN; DTC P0456 CAUSED BY EVAP LEAK AT VENT CONTROL VALVE O-RING This bulletin does NOT apply to LEAF vehicles and Titan XD vehicles with V8 diesel engine. This bulletin has been amended. See Amendment History on the last page. Please discard previous versions of this bulletin.
NHTSA source summary · Original PDF not reviewed by Recallfolio
TELEMATICS SERVICE INFORMATION This bulletin applies only to vehicles equipped with a Telematics Communication Unit (TCU). This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NHTSA source summary · Original PDF not reviewed by Recallfolio
ALL MODEL YEAR 2012 AND NEWER NISSAN VEHICLES; EVAP LEAK DTC P0442, P0455, P0456 INFORMATION This bulletin does NOT apply to LEAF vehicles and Titan XD vehicles with V8 diesel engine. This bulletin has been amended. See Amendment History on the last page. Please discard previous versions of this bulletin.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2018-2019 LEAF; REPLACING OR ALIGNING DISTANCE SENSOR (ICC SENSOR) BRACKET OR CHARGE PORT LID SERVICE INFORMATION If a distance sensor (ICC sensor) bracket is removed or replaced (see Figure 1 on the next page): - Take care when handling the distance sensor bracket. It can be damaged if dropped. - Do not bend the distance sensor bracket to adjust radar alignment. NOTE: If the distance sensor is difficult to align, confirm the bracket is not bent by comparing it to a known good vehicle. - Always perform an ICC Sensor Alignment (Radar Alignment Procedure) whenever the distance sensor bracket is removed or replaced. - To locate the Radar Alignment Procedure in the Electronic Service Manual (ESM), select the "Trouble Diagnosis" section and enter ICC Sensor Alignment into the Title Search field. If a charge port lid is removed or replaced: - Do not bend the charge port lid frame to adjust (Figure 2). - Do not bend any of the components attached to the charge port bracket (Figure 2). - To locate the Charge Port Lid Adjustment Specs and Procedure in the ESM, select the ?Inspection, Removal, and Installation? section and enter Charge Port Lid Assembly into the Title Search field. - Always perform an ICC Sensor Alignment (Radar Alignment Procedure) whenever any of the components called out in Figure 2 are removed or replaced. - To locate the Radar Alignment Procedure in the Electronic Service Manual (ESM), select the "Trouble Diagnosis" section and enter ICC Sensor Alignment into the Title Search field.
NHTSA source summary · Original PDF not reviewed by Recallfolio
FOG LAMP AND/OR HEADLAMP FOGGING This bulletin has been amended to add Fog Lamps and modify one step in the flow chart on page 3. No other changes have been made. Please discard previous versions of this bulletin.
NHTSA source summary · Original PDF not reviewed by Recallfolio
MIL ON WITH P0603 STORED FOR ECM BACK UP CIRCUIT This bulletin does NOT apply to Titan equipped with Cummins V8 Diesel engine. This bulletin has been amended to add a NOTE in the Applied Vehicles. No other changes have been made. Please discard previous versions of this bulletin.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING · EQUIPMENT.