Original record summaries, dates and identifiers for this model-year. Records 301–400 of 459, ordered newest first. Dated records on this page: Jan 20, 2024–Feb 14, 2025.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Feb 14, 2025Service Bulletin/Repair Instructions
21-016-25
NHTSA communication ID: 11014380
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Valve Body Replacement Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● U0101 - Lost Communication With The Transmission Control Module (TCM). ● U0402 - Implausible Data Received From TCM. ● U0418 - Implausible Data Received From Brake System Control Module 1. Customers may also comment on the following: ● Vehicle will go in limp-in mode. After limp-in mode, once in park the vehicle will not shift in gear. This bulletin involves replacing the Transmission Valve Body."
NHTSA source summary · Original PDF not reviewed by Recallfolio
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS Related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
NHTSA source summary · Original PDF not reviewed by Recallfolio
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Flash: Radio Frequency Hub Module (RFHM) Updates **Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):** ● B1A10-00 - RKE FOB 1 Battery Low. ● B1A11-00 - RKE FOB 2 Battery Low. ● B23D7-14 - Gated Park Control - Circuit Short To Ground Or Open. Customers may also experience one or more of the following: ● Vehicle does not start. ● Passive Entry (PE) intermittently inoperative. ● Keyless Ignition Node (KIN) unresponsive. ● Welcome feature does not activate at times. This bulletin involves inspecting and possibly updating the RFHM module with the latest available software."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0325 - Knock/Combustion Vibration Sensor ""A"" Circuit. ● P0330 - Knock/Combustion Vibration Sensor ""B"" Circuit. ● P0300 - Multiple Cylinder Misfire. (NA Market Only) ● P032A - Knock/Combustion Vibration Sensor ""C"" Circuit. ● P018B - Fuel Pressure Sensor ""B"" Circuit Rang/Performance. ● P1CEA - Boost Side EVAP Purge System Performance. (NA Market Only)** ● P00F3 - Humidity Sensor Circuit Range/Performance. ● P06DD - Engine Oil Pressure Control Circuit Performance/Stuck Off. ● P00C6 - Fuel Rail Pressure Too Low - Engine Cranking. Customers may also comment on one or more of the following: ● **Low oil pressure Instrument Cluster Panel (IPC) warning during heavy towing. ● Engine RPM dip below idle speed during coast down to idle.** ● Undesirable vehicle drivability behavior causing a vehicle Shift to Park event during Engine Stop Start (ESS) while Adaptive Cruise Control (ACC) is active. ● Idle speed oscillations observed when in Snow and Mud modes for vehicle configured with 4x2 drivetrain. ● Screen two incorrectly pops up on the IPC for five seconds during Terrain and Rock mode. ● Fully Autonomous Parking Assist (FAPA) is not deactivated when the accelerator pedal is pressed. ● Vehicle is not heating up fast enough at freezing temperatures. **The following software calibration improvements are also available: ● Engine mega knock detection. ● Misfire during cold start. ● Avoid false failures with MIL on. (NA Market Only)** This bulletin involves reprogramming the PCM with the latest available software."
NHTSA source summary · Original PDF not reviewed by Recallfolio
SHIFTER The service shifter message comes on in the cluster and the lever gets stuck in park "P" and it can be present the follwoing DTC: - U11E3 - TCM Lost communication with ESM on D-PT CAN - U0103 - Lost communication with Electric Gear Shift Module - U0101- Lost communication with DTCM - U0418 - Implausible Data Received From Brake System Control Module - U0402 - Implausible data received from TCM **NOTE: Prior any shifter replacement Refer to TSB-4582 2024-2025 WS - Valve Body Replacement. Recomended Diagnosis procedure: 1. Confirm if U0101 -Lost Communication with TCM or U0418 -Implausible Data Received From Brake System Control Module are present, if so check the Valve Body CAN Terminals any corrosion. 2. Check the wiring connectors between the ESM and the TCM and check voltage. 3. Check the pin header for the ESM for any bent pins. 4. If wiring and voltage are good and the DTCs (U11E3 - TCM Lost communication with ESM on D-PT CAN & U0103 - Lost communication with Electric Gear Shift Module) are still present, erase them with the scan tool. Reset ECU. 5. if DTCs for loss communication are still active at the ESM and you are still unable to shift then replace the Shifter module.
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P018B-00 - Fuel Pressure Sensor ""B"" Circuit Range/performance. ● P1CEA-00 - Boost Side Evap Purge System Performance. ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/stuck Off. The following software update is also available: ● Poor AC performance in hot ambient temperatures. ● Engine speed display improvement for tachometer on the Instrument Panel Cluster (IPC) - smoother tachometer display (previous was too active). ● Prevent false fails with MIL on. This bulletin involves reprogramming the PCM with the latest available software."
Source components: ELECTRICAL SYSTEM · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Flash: Central ADAS Decision Module (CADM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C008E - ECU Internal Performance. ● C2203-00 - Current VIN Missing/Mismatch. ● U015C-00 - Lost Communication With Automated Driving System Control Module ""A"". In addition, the customer may comment on one ore more of the following: ● Active Lane Management (ALM) settings do not save and turns ""Off"" between key-cycles. ● Adaptive Cruise Control (ACC) settings do not save between key-cycles. Defaults back to ""4 Bars"". ● ""Automatic Emergency Braking (AEB) Unavailable Service Required"" pop up intermittently on the Instrument Panel Cluster (IPC). ● ""Active Lane Management (ALM) Unavailable Service Required"" warning message appears on the IPC with no active fault codes. ● Blind Spot Monitoring (BSM) Warning Light LED ""flickering"" when activated. ● Traffic Sign Information (TSI) feature Indicator on the IPC ""blinking"" when driving past consecutive speed signs. This bulletin involves reprogramming of the CADM with the latest available software"
Source components: FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL · FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P018B-00 - Fuel Pressure Sensor ""B"" Circuit Range/performance. ● P1CEA-00 - Boost Side Evap Purge System Performance. ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/stuck Off. The following software update is also available: ● Engine speed display improvement for tachometer on the Instrument Panel Cluster (IPC) - smoother tachometer display (previous was too active). ● Prevent false fails with MIL on. This bulletin involves reprogramming the PCM with the latest available software"
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Flash: Hybrid Control Processor (HCP) and Auxiliary Hybrid Control Processor (AHCP) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0C19 - Drive Motor A Torque Delivered Performance. ● P1B03 - Resolver Signal / MCPA Rationality. ● B273C - Digital Crash Input. Customers may experience the following: ● Intermittent Wrench (service HV) Condition. This bulletin involves reprogramming the HCP/AHCP, also known as Power Inverter Module (PIM), with the latest available software."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"R1H Radio U33.43 USB Software Update Customers may experience one or more of the following: ● Unable to select the Turn by Turn Navigation. ● Blank Performance Pages (Rearview Camera (RVC) Functions Normally). ● Android Auto® Voice Recognition (VR) inoperative. ● Media tuner delayed. ● Charge Schedule not accepting updates via phone (RVC Functions Normally). ● Ambient light inoperative. ● Map in Instrument Panel Cluster (IPC) inoperative. ● Media Widget blank. ● Navigation map black. ● Off-Road Pages inoperative (RVC Functions Normally). ● VR inoperative. ● Incorrect song title displayed (Carplay® only). ● Radio display switches from Media Page to Home Page (RVC Functions Normally). ● Ghost touch on Navigation screen (RVC Functions Normally). ● Widgets missing. ● New User Profile does not load. ● Returns to wrong page after View Camera Event selected by customer in the Camera View Pages (RVC Functions Normally). This bulletin involves inspecting and if required, updating the radio software level to U33.43. Depending on the radio's current software level the radio may need a one or two USB update."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Flash: Electric Power Steering (EPS) Module Updates The customer may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs): ● C2217-00 - Electric Power Steering Module Internal. ● C221F-00 - ECU Not Initialized. ● C1592-00 - Electronic Power Steering Motor Circuit. ● C1593-00 - Steering Torque Sensor Circuit. This bulletin involves updating the EPS module with the latest available software"
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): lP018B-00 - Fuel Pressure Sensor ""B"" Circuit Range/performance. lP1CEA-00 - Boost Side Evap Purge System Performance. lP06DD-00 - Engine Oil Pressure Control Circuit Performance/stuck Off. The following software update is also available: lEngine speed display improvement for tachometer on the Instrument Panel Cluster (IPC) - smoother tachometer display (previous was too active). lPrevent false fails with MIL on."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. Customers may also comment on one or more of the following: ● Fully Autonomous Parking Assist (FAPA) is not deactivated when the accelerator pedal is pressed. ● Vehicle is not heating up fast enough at freezing temperatures This bulletin involves reprogramming the PCM with the latest available software."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Flash: Radio Frequency Hub Module (RFHM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● B1A10-00 - RKE FOB 1 Battery Low. ● B1A11-00 - RKE FOB 2 Battery Low. ● B23D7-14 - Gated Park Control - Circuit Short To Ground Or Open. Customers may also experience one or more of the following: ● Vehicle does not start. ● Passive Entry (PE) intermittently inoperative. ● Keyless Ignition Node (KIN) unresponsive. ● Welcome feature does not activate at times. This bulletin involves inspecting and possibly updating the RFHM module with the latest available software. "
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Damaged Inner Tie Rod Boots The technician or customer may notice the following: ● A twisted, dented, or otherwise damaged inner tie rod boot(s). This bulletin involves inspecting and possibly replacing the left and/or right inner tie rod boot(s)"
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Radio Over The Air Update to U33.43 Software Version (FOTA) Customers may experience one or more of the following: ● Unable to select the Turn by Turn Nav. ● Blank Performance Pages. Rearview Camera (RVC) functions normally. ● Android Auto® Voice Recognition Inop. ● Media Tuner Delayed. ● Charge Schedule HMI. RVC functions normally. ● Ambient Light Inop. ● Map in Cluster Inop. ● Media Widget Blank. ● Nav Map Black. ● Offroad Pages Inop. RVC functions normally. ● VR Inop. ● Incorrect Song Title Displayed, Carplay® only. ● HU switches from Media Page to Home Page. RVC functions normally. ● Ghost Touch on Nav screen. RVC functions normally. ● Widgets Missing. ● New User Profile does not load. ● Returns to wrong page after View Camera Event selected by customer in the ""Camera View Pages"""". RVC functions normally. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from U29.42 to U33.43. NOTE: The national launch for the FOTA is expected to begin September 30, 2024."
NHTSA source summary · Original PDF not reviewed by Recallfolio
TRANSFER CASE Before replacing a transfer case unit for fault codes C1444-98 and/or C1477-4B, be sure to reference TSB 21-048-24 for potential transfer case shift motor replacement
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Transfer Case Active Shift Motor Replacement Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C1444-98 - T-Case Motor Overuse-Component Or System Over Temperature. ● C1477-4B - Transfer Case Clutch-Over Temperature. Customers may also comment on the following: ● ""4WD Overheated Temporarily Unavailable"" message displayed in the Instrument Panel Cluster (IPC). This bulletin involves replacing the transfer case shift motor."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Flash: Central ADAS Decision Module (CADM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C008E - ECU Internal Performance. ● C2203-00 - Current VIN Missing/Mismatch. ● U015C-00 - Lost Communication With Automated Driving System Control Module ""A"". In addition, the customer may comment on one ore more of the following: ● Active Lane Management (ALM) settings do not save and turns ""Off"" between key-cycles. ● Adaptive Cruise Control (ACC) settings do not save between key-cycles. Defaults back to ""4 Bars"". ● ""Automatic Emergency Braking (AEB) Unavailable Service Required"" pop up intermittently on the Instrument Panel Cluster (IPC). ● ""Active Lane Management (ALM) Unavailable Service Required"" warning message appears on the IPC with no active fault codes. ● Blind Spot Monitoring (BSM) Warning Light LED ""flickering"" when activated. ● Traffic Sign Information (TSI) feature Indicator on the IPC ""blinking"" when driving past consecutive speed signs. This bulletin involves reprogramming of the CADM with the latest available software."
Source components: FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL · FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING · LANE DEPARTURE: ASSIST · LANE DEPARTURE: BLIND SPOT DETECTION · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
3.5" speaker assembly Before replacing a speaker part for crackles or rattling noises make sure to take the following steps: 1. Check for electrical harness routing too close to speaker's rear moving parts, improper connection, and/or harness pinch or damage. 2. Ensure no loose components, including trim grilles, fasteners, surrounding IP parts, etc. were found when removing the speaker. 3. Try "bad" speaker at another IP location and see if noise follows speaker. Try a different "good" speaker at "bad speaker location" and see if noise still happens at "bad" location. 4. Remove the bad speaker and replace it back. 5. If even with this verification and adjustments the speaker sounds bad, test the individual speaker with the audio files provided in the Service Library Homepage under "Reference Materials" prior to replacement. Follow all these steps, if issue still happens; reach out to the engineer at Stellantis for more support, if the engineer doesn t respond in 30 minutes. Then the speaker can be replaced.
NHTSA source summary · Original PDF not reviewed by Recallfolio
3.5" speaker assembly Before replacing a speaker part for crackles or rattling noises make sure to take the following steps: 1. Check for electrical harness routing too close to speaker's rear moving parts, improper connection, and/or harness pinch or damage. 2. Ensure no loose components, including trim grilles, fasteners, surrounding IP parts, etc. were found when removing the speaker. 3. Try "bad" speaker at another IP location and see if noise follows speaker. Try a different "good" speaker at "bad speaker location" and see if noise still happens at "bad" location. If even with this verification and adjustments the speaker sounds bad, test the individual speaker with the audio files provided in the Service Library Homepage under "Reference Materials" prior to replacement.
NHTSA source summary · Original PDF not reviewed by Recallfolio
After Radio Software Update, Pedestrian Emergency Brake (PEB) Lamp and Forward Collision Warning (FCW) Lamp on in Cluster or Other Customer Programable Features Concerns Not Set, No Diagnostic Trouble Codes (DTCs)
Source components: ELECTRICAL SYSTEM · FORWARD COLLISION AVOIDANCE: WARNINGS · SERVICE BRAKES.
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Headlamp Condensation Clearing Procedure Some customers may report that on occasion, vehicle exterior head lamp assemblies are fogged with a light layer of condensation on the inside of the lenses."
Source components: ELECTRICAL SYSTEM · STRUCTURE:BODY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Cluster and Radio Display Settings Revert Back to Default Settings, Auto Door Locks and Paddle Shifter Inoperative With No Menu to Enable, Pedestrian Emergency Brake (PEB) Lamp and Forward Collision Warning (FCW) Lamp on After a Recent Service Repair no Diagnostic Trouble Codes (DTCs)
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P06DD - Engine Oil Pressure Control Circuit Performance/Stuck Off. ● P00F3 - Humidity Sensor Circuit Range/Performance. Customer may also experience one or more of the following: ● Customers may experience coasting complaints at lower speed. ● Undesirable vehicle drivability behavior causing a vehicle Shift to Park event during Engine Stop Start (ESS) while Adaptive Cruise Control (ACC) is active. ● Pressing ACC button while ESS active can shift the vehicle to park. ● Idle speed oscillations observed when in Snow and Mud modes. ● Poor engine performance (undershoots engine speed) for ESS and for non-ESS engine start. ● Screen two incorrectly pops up on the Instrument Cluster Panel (IPC) for 5 seconds during Terrain and Rock mode. This bulletin involves reprogramming the PCM with the latest available software."
NHTSA source summary · Original PDF not reviewed by Recallfolio
BODY CONTROL MODULE After Battery Drainage BCM do not work. Please follow the following steps. 1. Check the BCM PROXI, if the BCM or any other modules are not aligned, then perform the PROXI alignment, reset the modules and perform normal ignition cycle (OFF to RUN to OFF) 2. If PROXI is correct (No misalignment), then reset the BCM module and perform normal ignition cycle. 3. Check for the DTC's and check wiring and components related to those DTC's and clear them
NHTSA source summary · Original PDF not reviewed by Recallfolio
Security Gateway Module Battery Voltage - Circuit Voltage Below Threshold - DTC B2199-16 Repair Action : 1) Check OR Replacing cabling. 2) Check OR Replacing connector. 3) Check the battery is good OR Replacing battery. 4) Check OR Replacing FUSE. 5) Check SGW terminal. Battery Voltage - Circuit Voltage Above Threshold - DTC B2199-17 Repair Action : 1) Check OR Replacing cabling. 2) Check OR Replacing connector. 3) Check the battery is good OR Replacing battery. 4) Check OR Replacing FUSE. 5) Check SGW terminal. CAN Bus- [C-CAN1] (Node mute) or CAN Bus Off Performance- (Bus off failure) - Check DTC in DTC matrix Repair Action: 1) CAN Lines Check 2) Read Fault memory of all nodes 3) Check and download the right calibration file for current vehicle configuration Ethernet Bus Failure - Check DTC Repair Action: 1) CAN Lines Check 2) Read Fault memory of all nodes 3) Check and download the right calibration file for current vehicle configuration ECU-In-Plant-Mode - B235A-00 Repair Action: Install Calibration file with correct policy Ecu Internal Performance - Internal Electronic Failure - DTC B22A9-49 Repair Action: 1. If its in store clear and check again if DTC shows up. 2. Check battery voltage 3. Issue still exist then change ECU ECU Not Programmed / Flash Required (No Valid Application) - DTC C221C-00 Repair Action: 1. Reflash ECU with correct file Control Module Security Certificate Missing/Invalid - DTC U3033-00 or U3033-01 Repair Action: 1. Check connectivity 2. Ethernet network 3. Flash with the latest FOTA App Code 4. Flash the cert store with correct certificate 5. Clear Faults
NHTSA source summary · Original PDF not reviewed by Recallfolio
Seat Control Module 3RD ROW SEAT WILL NOT CLOSE FULLY DOWN CUSTOMER STATES THE PASSENGER SIDE 3RD ROW WILL NOT CLOSE FULLY DOWN Steps for Tech: Before recalibrating 3rd row see please follow below mentioned steps first. -Turn off vehicle for 2 minute and then turn on vehicle and press 3rd row seat switch 2 times - Seat will start moving and relearn its correct hard stops and parameters. -Seat will recalibrate itself with updated SW.
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On "
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. ● P0300-00 - Multiple Cylinder Misfire. Customers may also comment on one or more of the following: ● Fully Autonomous Parking Assist (FAPA) is not deactivated when accelerator pedal is pressed. ● Vehicle is not heating up fast enough at freezing temperatures. This bulletin involves reprogramming the PCM with the latest available software."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. ● P0300-00 - Multiple Cylinder Misfire. Customers may also comment on one or more of the following: ● Fully Autonomous Parking Assist (FAPA) is not deactivated when accelerator pedal is pressed. ● Vehicle is not heating up fast enough at freezing temperatures. This bulletin involves reprogramming the PCM with the latest available software."
NHTSA source summary · Original PDF not reviewed by Recallfolio
Video Router After Battery Drainage VRM do not work. Please follow the following steps. 1. Check VRM proxi, if the VRM is not aligned, perform proxi alignment, reset module. 2. If proxi is correct, reset module 3. Check for DTCs, and check wiring and components related to those DTCs and clear them.
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Latch, Front Door For doors that won't open from fnterior, cable dislodged or door latch cables coming loose. Engineering is looking to collect pictures of the latches and cables as they are found by the dealers. These pictures will help us understand why they are coming lose, to develop a corrective action plan. Please submit pictures to the DID system."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Left Rear Door Trim Panel Defective Customers may experience the following: ● Rear left hand door panel might show broken plastic on the bottom of the door or nearby the map pocket. ● Rear left hand door panel to door attachments or component attachments may break. This bulletin involves replacing the rear left hand door panel."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Flash: Air Suspension Control Module (ASCM) Updates Customers may experience: ● After towing a heavy load above the protection limit, the air suspension will only lower and will remain in low ride height. Instrument Panel Message (IPC) message ""selected ride height not permitted due to payload"" appears. This bulletin involves reprogramming the ASCM with the latest available software."
Source components: ELECTRICAL SYSTEM · SUSPENSION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Air Spring For air suspension related concerns when a leak is suspected DO NOT replace airspring or other components;~ first reference SOL S2202000013. ~ Verify lines are fully seated in air springs and no leaks present. If airspring replacement is necessary, DO NOT replace multiple airsprings at once.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Radio Over The Air Update to U29.42 Software Version Customers may experience one or more of the following: ? Blank phone widget displayed. ? Radio freeze after reverse event (Rearview Camera (RVC) Functions Normally). ? Screen Off at start up (RVC Functions Normally). ? Radio restart before sleep after switching between different USBs. ? Pop up error "setting not saved" occurring when attempting to enable Geolocation (Privacy Mode Off). ? Amplifier module sets Diagnostic Trouble Code (DTC) U0485 Implausible Data Received From Radio. ? During FOTA Scheduling, if OK is not pressed to confirm time selected, vehicle will sleep. ? Apps downloaded for one connected profile are being shared with other local profiles. ? Switching profiles with slow response. ? Slow response switching between camera views. ? Black radio screen (RVC functions normally). ? Rear seat reminder alert unavailable. ? Wi-Fi software update pop-up is being triggered in non-connected vehicles. ? Switching to Android menu, display screen blinks on green color. ? Microphone inoperative during SOS call from the vehicle. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from T27.39 or U29.28 to U29.42. NOTE: The national launch for the FOTA is expected to begin **February 16, 2024.**
Source components: BACK OVER PREVENTION · ELECTRICAL SYSTEM.