Original record summaries, dates and identifiers for this model-year. Records 201–300 of 312, ordered newest first. Dated records on this page: Sep 28, 2023–Feb 9, 2025.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Feb 9, 2025Service Bulletin/Repair Instructions
S2508000013
NHTSA communication ID: 11014137
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Cluster Electronic Vehicle Information Center (EVIC) Displays “ACC/FCW Unavailable Service Required”, “Adaptive Cruise Control (ACC) System is Disabled”
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Fuel Tank Breather Tube Loose Customers may comment on the following: ● Difficult to refuel the vehicle This bulletin involves inspecting, and if necessary, properly connecting the fuel hose quick connects"
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Fuel Tank Breather Tube Loose Customers may comment on the following: ● Difficult to refuel the vehicle This bulletin involves inspecting, and if necessary, properly connecting the fuel hose quick connects"
NHTSA source summary · Original PDF not reviewed by Recallfolio
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS Related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
NHTSA source summary · Original PDF not reviewed by Recallfolio
"High pressure Fuel Pump Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0087 - Sensor De Pressão Da Linha De Combustível - Banco 1 - Pressão Abaixo Do Limite ● P0088 - Sensor De Pressão Da Linha De Combustível - Banco 1 - Pressão Acima Do Limite ● P0089 - Sensor De Pressão Da Linha De Combustível 1 - Desempenho Customers may also comment on one or more of the following: ● The engine is running rough. ● Partial loss of engine power. This bulletin involves replacing the high pressure fuel pump."
NHTSA source summary · Original PDF not reviewed by Recallfolio
Steering Wheel Push Button Breakage Customers may comment on the following: ● One or more of the frontward steering wheel switch buttons are broken, or are inoperable.
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): lP012D-00 - Turbocharger/Supercharger Partida A Frio - Controle ""A"" - Circuito Alto. Customers may also experience the following: lLoss of power reduction gradually until around 50km/h (32 mph)."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Rear Seat Belt Will Not Retract This bulletin involves unfolding one or both rear seat belts Customers may experience a rear seat belt that does not retract or is locked."
NHTSA source summary · Original PDF not reviewed by Recallfolio
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
NHTSA source summary · Original PDF not reviewed by Recallfolio
Turbocharger Kit Please note many parts of the Turbo Assembly can be serviced separately and complete turbo replacement may not be necessary. If the Turbo is being replaced for a noise or a rattle, inspect the wastegate for binding. The actuator kit is serviced separately. If the turbo is being replaced for an oil leak concern, please inspect the area around the turbo oil feed oring for a leak. The o-ring is serviced separately
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Pedestrian Emergency Braking (PEB) Radio Menu Inoperative Customers may comment on one or more of the following: ● Forward Collision Warning (FCW) radio menu option does not work. ● PEB radio menu option does not work. This bulletin involves replacing the radio and performing a PROXI configuration alignment."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Seatback Not Torqued Properly Customers may experience the following: ● Loose seatback on the passenger front seat. This bulletin involves removing the passenger seat and tightening the fasteners that join the seatback to the seat"
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Power Transfer Unit (PTU) Failure Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C2270-77 - Power Transfer Unit PTU Electronic Disconnect Actuator EDA Sensor - Commanded Position Not Reachable. ● C2290-92 - EDA Motor Free Running - Performance Or Incorrect Operation. ● C2280-92 - Eda Current - Performance Or Incorrect Operation. ● C2240-92 - Etm Motor Free Running - Performance Or Incorrect Operation. ● C2120-13 - Motor 2 - Circuit Open. ● C2120-14 - Motor 2 - Circuit Short To Ground. ● C2120-15 - Motor 2 - Circuit Short To Battery. This bulletin involves possibly replacing the PTU, shift actuator and wire harness."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Noise From Steering Wheel While Turning Customers may comment on the following: ● Noise when turning the steering wheel. This bulletin involves inspecting the steering wheel operation for a noise while turning and, if noisy, repositioning the steering wheel wire harness."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Noise From Steering Wheel While Turning Customers may comment on the following: ● Noise when turning the steering wheel. This bulletin involves inspecting the steering wheel operation for a noise while turning and, if noisy, repositioning the steering wheel wire harness."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Various Models - Engine Valley Cap (Flywheel Side) - Oil Leakage - Service Solution Customers may experience the following: ● Oil leaks from the engine compartment, engine/transmission coupling. When the claimed fault is confirmed, replace the engine valley cap, according to the Repair Procedure"
NHTSA source summary · Original PDF not reviewed by Recallfolio
MODULE Steering Control Before replacing the steering column control module (SCCM) due to front or rear windshield wiper operation / blindspot inop / lane assistant inop/ DTC B178F-15 active, please follow these steps: 1.- Refer to TSB-08-219-24 MP - Rear Windshield Wipers Operate Continuously and TSB 08-136-24 REV. A - Adaptive Cruise Control (ACC) Module Update. 2.- Verify if failure is still present (review wipers, turn signal, blindspot and lane assistant status) and if DTCs still active. 3.- If failure still present, make sure all the switches' and airbag's harness are properly connected and there is no corrosion, disconnect the switches & reconnect them, and reverify the issue. 4.- Read at the BCM diagnosis session if BCM is receiving information from SCCM. Through diagnosis review if activation from wipers is requested, if turn signal, blindspot and lane assistant work. 5.- Do a hard reset of battery to BCM and evaluate if any DTC is set. Retest if failure still present. If there are no DTC's, physical defects, wipers inop, nor turn signal inop, then SCCM does not need to be replaced.
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Multiple Systems Repair Bundle Campaign Customers may experience one or more of the following: ● Sunvisor lamp does not function. ● Air Conditioning is not cooling. ● No sound from the radio when in navigation mode. This bulletin involves performing multiple inspections based on the listed Customer Symptoms and possibly performing the associated Repair Procedure Operations."
Source components: ELECTRICAL SYSTEM · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P2002 - Diesel Particulate Filter Flow Resistance Monitoring Too High Level 2 Component Or System Operation Obstructed Or Blocked. Customers may also comment on the following: ● Vehicle will go to limp-in mode. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Rear Windshield Wipers Operate Continuously Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● U1046-00 - LIN 4 Bus. ● U0140-00 - Lost Communication With Body Control Module. ● U121E-00 - Lost Communication With Steering Wheel Cruise Control Switch. Customers may also comment on one or more of the following: ● Rear windshield wipers will continue to operate after the windshield wiper switch is turned to OFF. ● Electronic Vehicle Information Center (EVIC) is flashing. ● The front windows may not operate. CAUSE: Body Control Module (BCM) water intrusion This bulletin involves inspecting the BCM for water intrusion, replacing the BCM if needed, and replacing and rerouting a washer hose assembly."
Source components: ELECTRICAL SYSTEM · STRUCTURE:BODY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Radio Over The Air Update from U31.42 to U33.43 Software Version (FOTA) Customers may experience one or more of the following: ● Unable to select the Turn by Turn Navigation. ● Blank performance pages (Rearview Camera (RVC) functions normally). ● Android Auto® Voice Recognition (VR) inoperative. ● Media Tuner delayed. ● Charge Schedule not accepting updates via phone (RVC functions normally). ● Ambient light inoperative. ● Map in Instrument Panel Cluster (IPC) inoperative. ● Media Widget blank. ● Navigation Map black. ● Off-Road Pages inoperative (RVC functions normally). ● VR inoperative. ● Incorrect song title displayed (Carplay® only). ● Radio display switches from Media Page to Home Page (RVC functions normally). ● Ghost touch on Navigation screen (RVC functions normally). ● Widgets missing. ● New User Profile does not load. ● Returns to wrong page after View Camera Event selected by customer in the Camera View Pages (RVC functions normally). This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from U31.42 to U33.43."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Crank Gear Flange Dislocation Customers may experience one or more of the following: ● Vehicle does not start due to crank gear flanged dislocated. ● Abnormal noise from the engine compartment. ● Noise from the timing cover area. This bulletin involves inspecting the timing belt position and possibly replacing the timing belt **and tensioner assemblies**."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Thermostat Stuck Open Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P0128-00 - Termostato Elétrico - Racionalidade. Customers may also comment on one or more of the following: ● The vehicle does not have heat inside the cabin. ● The engine is running cold This bulletin involves replacing the thermostat."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Flash: Hybrid Control Module (HCP) and Auxiliary Hybrid Control Module (AHCP) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P0C74 - Motor Electronics Coolant Pump ""B"" Control Performance. This bulletin involves reprogramming the HCP and AHCP also known as Power Inverter Module (PIM), with the latest available software."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Rear Main Crankshaft Oil Seal Leak Customers may comment on the following: ● Engine oil leak. This bulletin involves inspecting for oil leaks and if necessary replacing the rear main crankshaft oil seal."
NHTSA source summary · Original PDF not reviewed by Recallfolio
ACC Sensor Blinded, “ACC Unavailable Service Required” “FCW Unavailable Service Required”, Adaptive Cruise Control (ACC) system disabled, Loss of Advanced Driver Assist System (ADAS) Features Messages Displayed on the Instrument Panel Cluster (IPC)
Source components: ELECTRICAL SYSTEM · FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL · FORWARD COLLISION AVOIDANCE: WARNINGS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Universal garage door opener Before replacing the Universal Garage Door (UGDO), please follow these steps: 1. Press 1 and 3 button (outside buttons) in the same time. 2. Keep them pushed for approximately 20 seconds until de LED starts to flash rapidly (Warning: If you keep pressing the HOMELINK passed the 20s, the UGDO will be blocked). (Do not repeat this steps to program the other two buttons) HomeLink feedback is located above the HomeLink button 2. An LED light will illuminate to indicate programming status
NHTSA source summary · Original PDF not reviewed by Recallfolio
Universal garage door opener Before replacing the Universal Garage Door (UGDO), please follow these steps: 1. Press 1 and 3 button (outside buttons) in the same time. 2. Keep them pushed for approximately 20 seconds until de LED starts to flash rapidly (Warning: If you keep pressing the HOMELINK passed the 20s, the UGDO will be blocked). (Do not repeat this steps to program the other two buttons) HomeLink feedback is located above the HomeLink button 2. An LED light will illuminate to indicate programming status
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Tail Lamp Condensation Customers may experience one or more of the following: ● Foggy appearance in body side tail lamp (M6 & H6). ● Foggy appearance in exterior lamp bar (H6). This bulletin involves inspecting and possibly replacing the body side tail lamp and/or the exterior lamp bar."
Source components: ELECTRICAL SYSTEM · STRUCTURE:BODY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Thermostat Stuck Open Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P0128-00 - Termostato Elétrico - Racionalidade. Customers may also comment on one or more of the following: ● The vehicle does not have heat inside the cabin. ● The engine is running cold This bulletin involves replacing the thermostat."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Multiple Systems Repair Bundle Campaign Customers may experience one or more of the following: ● Sunvisor lamp does not function. ● Air Conditioning is not cooling. ● No sound from the radio when in navigation mode. This bulletin involves performing multiple inspections based on the listed Customer Symptoms and possibly performing the associated Repair Procedure Operations."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Flash: Adaptive Cruise Control (ACC) Module Update Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC) has been set: ● C0063-9A - Yaw Rate Sensor - Component Or System Operating Conditions. This bulletin involves reprogramming of the ACC module with the latest available software."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Thermostat Stuck Open Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P0128-00 - Termostato Elétrico - Racionalidade. Customers may also comment on one or more of the following: ● The vehicle does not have heat inside the cabin. ● The engine is running cold. This bulletin involves replacing the thermostat."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Headlamp Condensation Clearing Procedure Some customers may report that on occasion, vehicle exterior head lamp assemblies are fogged with a light layer of condensation on the inside of the lenses."
Source components: ELECTRICAL SYSTEM · STRUCTURE:BODY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P1D3E - Central De Controle De Injeção (ECM) - Monitoramento Interno 1 - Falha Interna No Sistema. ● P1D40 - Central De Controle De Injeção (ECM) - Monitoramento Interno 3 - Falha Eletrônica Interna."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Plant Mode Activated Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C170C-00 - PBC (Event PBC Factory Mode). ● C1436-86 - Electric Parking Brake System Fail. ● C10D0 - Electronic Park Brake System Failure. Customers may experience one or more of the following: ● Vehicle does not accelerate properly. ● Anti-Lock Brakes System (ABS) warning light on. This bulletin involves replacing the ABS Module."
NHTSA source summary · Original PDF not reviewed by Recallfolio
SWITCH Power Window Before replacing the master window switch (Driver door window switch), please follow these steps: 1.- Review the master window Switch for any physical issue (Button stuck, broke). If not, physical issue is found move to next step 2.- Review window switch internal resistors, and make sure it matches the continuity chart found on service info of the switch. (649 +/- 7 Ohms when pushing UP, 2519 +/- 25 Ohms when pushing down) If an issue is found with the internal resistor or on the physical parts of the switch, please replace the switch.
Source components: ELECTRICAL SYSTEM · STRUCTURE:BODY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
oil pump - electric Please confirm that the connector for the transmission electric oil pump is fully latched in place prior to proceeding with the remaining diagnostic steps. If the DTC U0287 duplicates after securing the electric oil pump connector, please replace the electric oil pump.
Source components: ELECTRICAL SYSTEM · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre-authorization is required or pre-approval is required from the Regional Office; depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Management Procedure for Customer Issues in Connected Services Customers may experience the following: ● Various Connected Services issues. The purpose of this informative Technical Service Bulletin (TSB) is to support the Network on the following topics: ● Discern the different kinds of connected service issues (onboard / offboard). ● Support the customer in his journey to open a request via Customer Care. ● Address on the correct actions to properly manage a customer complaining about the received assistance."
NHTSA source summary · Original PDF not reviewed by Recallfolio
Turbocharger Kit Please note many parts of the Turbo Assembly can be serviced separately and complete turbo replacement may not be necessary. If the Turbo is being replaced for a noise or a rattle, inspect the wastegate for binding. The actuator kit is serviced separately. If the turbo is being replaced for an oil leak concern, please inspect the area around the turbo oil feed o-ring for a leak. The o-ring is serviced separately.
NHTSA source summary · Original PDF not reviewed by Recallfolio
CLOCKSPRING Steering Column Control Module Before replacing the steering column control module (SCCM), please follow these steps: 1.- Make sure all the switches' and airbag's harness are properly connected, disconnect the switches and reconnect them, and reverify the issue. 2.- Pull the SCCM fuse for 60 sec and then reinstall it. 3.- Reverify if Steering wheel switches are inoperative. If there are no DTC's, physical defects, nor switches inop, then SCCM does not need to be replaced.
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Rear Taillamp Condensation Clearing Procedure On occasion, vehicle exterior taillamp assemblies are fogged with a light layer of condensation on the inside of the lenses Fig. 1. This may be reported after the lamps have been turned on and brought up to operating temperature, turned off and then rapidly cooled by cold water (such as rain, or the water from a vehicle wash). Lens fogging can also occur under certain atmospheric conditions after a vehicle has been parked outside overnight (i.e. a warm humid day followed by clear cool night). This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor. Turning the taillamps on will usually accelerate this process. This bulletin is to communicate the procedure for rear taillamp condensation clearing."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Fuel Odor or Difficult to Refuel Customers may experience one or more of the following: ● Difficult to refuel the vehicle. ● Fuel odor detected. This bulletin involves inspecting, and if necessary, properly connecting the fuel hose quick connects."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Steering Wheel Push Button Breakage Customers may comment on the following: ● One or more of the frontward steering wheel switch buttons are broken, or are inoperable. This bulletin involves inspecting all the frontward steering wheel switch buttons and possibly replacing one, or both switch banks."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On "
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Flash: Adaptive Cruise Control (ACC) Module Update Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC) has been set: ● C0063-9A - Yaw Rate Sensor - Component Or System Operating Conditions. This bulletin involves reprogramming of the ACC module with the latest available software."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Rear View Camera (RVC) Error Customers may experience the following: ● RVC display has a blurry image, a blue screen and/or grid line that is not working Fig. 1. This bulletin involves inspecting the RVC for errors and possibly replacing the RVC."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"GENERATOR Engine Prior to alternator/generator removal: 1. Inspect & check all electrical connections to the alternator a. 2-way connector containing field control circuit & alternator sense voltage circuit. b. Unplug & plug-in the 2-way connector for field & sense circuit. Verify the connection is tight & check for any bent pins in alternator connector or damage to female terminals in connector. c. Check Alternator B+ Stud connection to be sure nut is securing positive cable terminal properly (i.e. nut is clamping terminal & connection is tight). d. Check fuse between the alternator B+ stud & PDC terminal to make sure it is not blown. e. Be sure to follow service manual sections on ALTERNATOR CONTROL CIRCUIT DIAGNOSTIC & ALTERNATOR SENSE CIRCUIT DIAGNOSTIC looking for any opens & shorts (to ground or battery voltage). 2. Check/verify all grounds in the charging system circuit a. Check tightness of mounting bolts securing alternator to engine block. Alternator is a case ground component. b. Check main ground from engine to chassis; connection must be tight. c. Check battery ground cable connections are tight. d. Potentially, loosen alternator mounting bolts, without removing alternator, and re-tighten to torque specifications in service manual. e. After all steps above are complete, re-start engine & check charging system operation. 3. Verify that the Smart Charging System is not the reason for alternator low voltage & current output (Amps). a. Alternator charging can be suspended during engine idle operation because of the Smart Charge strategy. b. Refer to service manual section ""System Operation - Smart Charging System"". c. Refer to Star Case S2008000031 Rev A for low charging voltage & Smart Charge Mode Voltage Range diagram & mode descriptions. d. The alternator has no internal regulator; thus, has no smart circuitry. All alternator control signals come from ECM. 4. If alternator is faulty, remove alternator & mounting bolts. Return alternator with bolts for analysis at QEC."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Flash: Driver Assistant System Module (DASM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● C0063-9A - Yaw Rate Sensor - Component Or System Operating Conditions. This bulletin involves reprogramming of the DASM with the latest available software."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Air Conditioning Not Blowing Cold or is Inoperative The customer or technician may describe or find one or more of the following: ● A/C system provides insufficient cabin cooling. ● Low A/C system pressure. ● Lack or loss of refrigerant in the A/C system. This bulletin involves performing an inspection and possibly replacing A/C lines."
Source components: ELECTRICAL SYSTEM · VISIBILITY/WIPER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Crank Gear Flange Dislocation Customers may experience one or more of the following: ● Vehicle does not start due to crank gear flanged dislocated. ● Abnormal noise from the engine compartment. ● Noise from the timing cover area. This bulletin involves inspecting the timing belt position and possibly replacing the timing belt assembly."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Rear View Camera (RVC) Error Customers may experience the following: ● RVC display has a blurry image, a blue screen and/or grid line that is not working Fig. 1. This bulletin involves inspecting the RVC for errors and possibly replacing the RVC."
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Rear View Camera (RVC) Error Customers may experience the following: ● RVC display has a blurry image, a blue screen and/or grid line that is not working Fig. 1. This bulletin involves inspecting the RVC for errors and possibly replacing the RVC."
NHTSA source summary · Original PDF not reviewed by Recallfolio
Headlamp Condensation Clearing Procedure Some customers may report that on occasion, vehicle exterior head lamp assemblies are fogged with a light layer of condensation on the inside of the lenses.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
NHTSA source summary · Original PDF not reviewed by Recallfolio
Rear Wheel Bearing Noise The customer may notice the following: ? Rear wheel bearing noise on the right side while driving the vehicle. This bulletin involves replacing the right rear wheel bearing.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Air Conditioning Not Blowing Cold or is Inoperative Customers may comment on one or more of the following: ? A/C will not function. ? A/C is not blowing cold. This bulletin involves performing an inspection on and possibly replacing the evaporator.
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Body Control Module (BCM) Updates Customers may experience the following: ? Autofolding mirrors inoperative This bulletin involves reprogramming the BCM module with the latest available software.
Source components: ELECTRICAL SYSTEM · ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM · STRUCTURE.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) has been set: ? P0087 - Fuel Rail Pressure Too Low - Bank 1. ? P0088 - Fuel Rail Pressure Too High - Bank 1. This bulletin involves reprogramming the PCM with the latest available software.
Source components: ELECTRICAL SYSTEM · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Low Oil Pressure Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Code (DTC) has been set: ? P06DD - Engine Oil Pressure Control Circuit Stuck Off. Customers may also comment on the following: ? Vehicle will not be able to exceed 3,300 RPM (when DTC P06DD is active). This bulletin involves inspecting and if necessary replacing the timing chain cover (oil pump).
Source components: EXTERIOR LIGHTING · SERVICE BRAKES, HYDRAULIC.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Right Engine Insulator Noise Customers may experience the following: ? Metallic clicking noises when when moving the vehicle forward and reverse This bulletin involves inspecting and if needed replacing the right engine insulator.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash: Body Control Module (BCM) Updates Customers may experience the following: ? Autofolding mirrors inoperative This bulletin involves reprogramming the BCM module with the latest available software.