The manufacturer’s record · Page 2 of 2
Original record summaries, dates and identifiers for this model-year. Records 101–176 of 176, ordered newest first. Dated records on this page: Aug 15, 2019–Oct 1, 2021.
Back to 2020 Hyundai PALISADE problems & recallsThis archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
NHTSA communication ID: 10203272
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing
Source components: STEERING.
Source record 10203272 at NHTSANHTSA communication ID: 10202188
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2020-2021MY Palisade (LX2) vehicles may experience reduced A/C performance due to an out of specification A/C compressor pulley and hub assembly. Follow the procedure outlined in this bulletin to inspect and determine whether to replace the compressor assembly or only the pulley using the service kit.
Source components: ELECTRICAL SYSTEM · VISIBILITY.
Source record 10202188 at NHTSANHTSA communication ID: 10201467
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin describes the procedure to update the Shift Control Unit (SCU) for Shiftby- Wire (SBW). The update is to revise the logic for the following DTC: ï· P060148 (Functional Safety Level 2 SW failure) ï· P106D00 (Actuator initialization error) ï· P106D71 (Actuator motor stuck error) ï· U110382 (SBW lever Alive counter error).
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
Source record 10201467 at NHTSANHTSA communication ID: 10200075
NHTSA source summary · Original PDF not reviewed by Recallfolio
This TSB provides a procedure to diagnose the push button shifter operation.
Source components: POWER TRAIN.
Source record 10200075 at NHTSANHTSA communication ID: 10199104
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin describes the procedure to replace the inside belt molding and attach pads to the side view mirror seal, side view mirror hole, and glass run on certain Palisade vehicles experiencing wind and/or whistling noise while driving.
Source components: STRUCTURE.
Source record 10199104 at NHTSANHTSA communication ID: 10199101
NHTSA source summary · Original PDF not reviewed by Recallfolio
If you are servicing an 8-speed front-wheel-drive vehicle with the DTC or symptoms listed below, refer to the Service Procedure to diagnose the condition. ï· DIAGNOSTIC TROUBLE CODES: ï P070500 - Transmission range sensor circuit malfunction ï P070512 - Transmission range sensor circuit malfunction ï P070514 - Transmission range sensor circuit malfunction ï P07051C - Transmission range sensor circuit malfunction ï P070600 - Transmission range sensor circuit range/performance ï P070661 - Transmission range sensor circuit range/performance ï P070696 - Transmission range sensor circuit range/performance ï· SYMPTOMS: ï Malfunction Indicator Light (MIL) illuminated ï 5th gear fail-safe ï No gear indication in cluster ï Intermittently wonât shift into D or R ï Intermittently wonât shift out of Park ï Intermittent ly no engine cr ank/no start in âPâ or âNâ with or without MIL or DTC.
Source components: POWER TRAIN.
Source record 10199101 at NHTSANHTSA communication ID: 10199102
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin describes the procedure to update the Shift Control Unit (SCU) for Shift-by-Wire (SBW). The update is for MIL on and the following DTC: ï· P106D00 (Actuator initialization error) ï· P106D71 (Actuator motor stuck error) ï· U110382 (SBW lever Alive counter error).
Source components: POWER TRAIN.
Source record 10199102 at NHTSANHTSA communication ID: 10190044
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.
Source record 10190044 at NHTSANHTSA communication ID: 10190038
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides best practice recommendations when performing brake service procedures.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · SERVICE BRAKES.
Source record 10190038 at NHTSANHTSA communication ID: 10189991
NHTSA source summary · Original PDF not reviewed by Recallfolio
When using Wireless CarPlay, the system may intermittently auto disconnect. When Wireless CarPlay is disconnected, a pop up message âPhone Not Responding. Please reconnect it and try againâ will appear on the radio screen.
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10189991 at NHTSANHTSA communication ID: 10189804
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2021 Santa Fe (TMa) and Palisade (LX2) may intermittently experience abnormal camera image display conditions on the instrument cluster when the turn signal is turned ON or the radio screen when transmission is in Reverse. The following conditions may occur; blurry image, line on the screen, fuzziness, or blue screen. This bulletin provides information to assist with troubleshooting the condition(s) above.
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10189804 at NHTSANHTSA communication ID: 10189990
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin describes the procedure to replace the inside belt molding and attach pads to the side view mirror seal, side view mirror hole, and glass run on certain Palisade vehicles experiencing wind and/or whistling noise while driving.
Source components: EQUIPMENT · VISIBILITY.
Source record 10189990 at NHTSANHTSA communication ID: 10189989
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.
Source record 10189989 at NHTSANHTSA communication ID: 10186827
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin describes the procedure to service certain Palisade (LX2) vehicles that may have odor emitting from the headrest(s).
Source components: SEATS.
Source record 10186827 at NHTSANHTSA communication ID: 10186817
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin describes the procedure to diagnose and repair tire pressure monitoring system (TPMS) DTC(s) on some 2020-2021MY Palisade (LX2) and Santa Fe (TMa) vehicles equipped with surround view monitoring (SVM) system.
Source components: EQUIPMENT · TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS · WHEELS.
Source record 10186817 at NHTSANHTSA communication ID: 10185443
NHTSA source summary · Original PDF not reviewed by Recallfolio
When using Wireless CarPlay, the system may intermittently auto disconnect. When Wireless CarPlay is disconnected, a pop up message âPhone Not Responding. Please reconnect it and try againâ will appear on the radio screen.
Source components: ELECTRICAL SYSTEM.
Source record 10185443 at NHTSANHTSA communication ID: 10185419
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain Santa Fe (TMa) and Palisade (LX2) vehicles may exhibit noise coming from the second row seat track. This bulletin provides information on how to inspect and if necessary repair the condition.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · SEATS.
Source record 10185419 at NHTSANHTSA communication ID: 10183963
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.
Source components: SERVICE BRAKES.
Source record 10183963 at NHTSANHTSA communication ID: 10183960
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the âTire Balance Data Sheetâ must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin.
Source components: TIRES · WHEELS.
Source record 10183960 at NHTSANHTSA communication ID: 10182320
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin describes the procedure to service certain Palisade (LX2) vehicles that may have odor emitting from the headrest(s).
Source components: SEATS.
Source record 10182320 at NHTSANHTSA communication ID: 10182314
NHTSA source summary · Original PDF not reviewed by Recallfolio
If you are servicing an applicable vehicle with a âCheck Engineâ light on and one or more of the DTC listed below, follow the repair procedure and replace the related solenoid and valve body harness.
Source components: POWER TRAIN.
Source record 10182314 at NHTSANHTSA communication ID: 10182305
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2021 Santa Fe (TMa) and Palisade (LX2) may intermittently experience abnormal camera image display conditions on the instrument cluster when the turn signal is turned ON or the radio screen when transmission is in Reverse. The following conditions may occur; blurry image, line on the screen, fuzziness, or blue screen. This bulletin provides information to assist with troubleshooting the condition(s) above.
Source components: BACK OVER PREVENTION.
Source record 10182305 at NHTSANHTSA communication ID: 10182304
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides information and procedures for collecting OBD âIn Use Monitor Performance Ratioâ (IUMPR) data on certain 2019-2021MY vehicles at California dealers. This reporting is mandated by CARB (California Air Resources Board).
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10182304 at NHTSANHTSA communication ID: 10180985
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft assembly.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · STEERING.
Source record 10180985 at NHTSANHTSA communication ID: 10180981
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components.
Source components: EQUIPMENT · STEERING.
Source record 10180981 at NHTSANHTSA communication ID: 10181004
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2019-2020 Nexo (FE), and 2020 Palisade (LX2) vehicles equipped with the power tailgate may not operate. This bulletin provides the service procedure to inspect and when necessary perform the power tailgate spindle wire harness revision.
Source components: STRUCTURE.
Source record 10181004 at NHTSANHTSA communication ID: 10180977
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides a procedure to transfer pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the transmission learning time and improve the shift quality.
Source components: POWER TRAIN.
Source record 10180977 at NHTSANHTSA communication ID: 10179246
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft assembly.
Source components: ELECTRICAL SYSTEM · STEERING:COLUMN · STEERING:ELECTRIC POWER ASSIST SYSTEM.
Source record 10179246 at NHTSANHTSA communication ID: 10179244
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components.
Source components: ELECTRICAL SYSTEM · STEERING:AUTOMATED/ADAPTIVE STEERING:MOTOR/ACTUATOR · STEERING:COLUMN.
Source record 10179244 at NHTSANHTSA communication ID: 10178175
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. The TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes, or during normal driving operation.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · EXTERIOR LIGHTING.
Source record 10178175 at NHTSANHTSA communication ID: 10177139
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2019 - 2020 Nexo (FE), 2020 Palisade (LX2), and 2019 - 2020 Santa Fe (TM) vehicles equipped with the power tailgate may not operate. This bulletin provides the service procedure to inspect and when necessary perform the power tailgate spindle wire harness revision.
Source components: ELECTRICAL SYSTEM · EQUIPMENT · STRUCTURE:BODY:TAILGATE.
Source record 10177139 at NHTSANHTSA communication ID: 10177138
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2019-2020 Nexo (FE), 2020 Palisade (LX2), and 2019 - 2020 Santa Fe (TM) vehicles equipped with the power tailgate may experience a nonoperational condition. This campaign provides service procedures to inspect and when necessary, perform the power tailgate spindle wire harness revision.
Source components: EQUIPMENT · STRUCTURE.
Source record 10177138 at NHTSANHTSA communication ID: 10177086
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain Santa Fe (TM) and Palisade (LX2) vehicles may exhibit noise coming from the second row seat track. This bulletin provides information on how to inspect and if necessary repair the condition.
Source components: SEATS.
Source record 10177086 at NHTSANHTSA communication ID: 10176198
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin describes the Idle Stop and Go (ISG) system operation, diagnostic and battery sensor recalibration procedure. Refer to applicable Shop Manual and Ownerâs Manual for additional information.
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN · SERVICE BRAKES, HYDRAULIC.
Source record 10176198 at NHTSANHTSA communication ID: 10176196
NHTSA source summary · Original PDF not reviewed by Recallfolio
If you are servicing any of the vehicles listed below with a harsh and/or delayed shift, use the GDS as shown in the Service Procedure to measure shift engagement time.
Source components: POWER TRAIN.
Source record 10176196 at NHTSANHTSA communication ID: 10176191
NHTSA source summary · Original PDF not reviewed by Recallfolio
Hyundai is conducting a Service Campaign to inspect the power tailgate harness and when necessary, perform the power tailgate spindle wire harness update.
Source components: STRUCTURE.
Source record 10176191 at NHTSANHTSA communication ID: 10176190
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2019-2020 Nexo (FE), and 2020 Palisade (LX2) vehicles equipped with the power tailgate may not operate. This bulletin provides the service procedure to inspect and when necessary perform the power tailgate spindle wire harness revision
Source components: STRUCTURE.
Source record 10176190 at NHTSANHTSA communication ID: 10176182
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance.
Source components: TIRES · WHEELS.
Source record 10176182 at NHTSANHTSA communication ID: 10176178
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using recommended safe chemical products.
Source components: EQUIPMENT.
Source record 10176178 at NHTSANHTSA communication ID: 10174808
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides information on identifying dealer stock vehicles with either: ⢠A Battery SOC alert - low Battery State of Charge (SOC) at or below 50%. ⢠A 30 Day alert - vehicle has not started and reported an SOC in 30 days.
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10174808 at NHTSANHTSA communication ID: 10174807
NHTSA source summary · Original PDF not reviewed by Recallfolio
The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both OEM (new) and remanufactured automatic transmissions:
Source components: EQUIPMENT ADAPTIVE/MOBILITY · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · POWER TRAIN.
Source record 10174807 at NHTSANHTSA communication ID: 10174806
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin describes the procedure to update the Shift Control Unit (SCU) for Shift-by-Wire (SBW). The update is for MIL on and the following DTC: P106D00 (Actuator initialization error), P106D71 (Actuator motor stuck error) and U110382 (SBW lever Alive counter error).
Source components: ELECTRICAL SYSTEM · POWER TRAIN.
Source record 10174806 at NHTSANHTSA communication ID: 10173553
NHTSA source summary · Original PDF not reviewed by Recallfolio
Hyundai vehicles are equipped with Dark Current Control logic to help reduce amperage draw amount and conserve Battery State of Charge (SOC%). A selected Dark Current Control Mode will function when the vehicle is in the key off state, and will not affect vehicle functionality or performance.
Source components: ELECTRICAL SYSTEM.
Source record 10173553 at NHTSANHTSA communication ID: 10173546
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin describes the general guidelines to disinfect and protect vehicle interior surfaces using certain safe chemical products.
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10173546 at NHTSANHTSA communication ID: 10173545
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin describes the mandatory procedure to submit battery test data electronically for battery warranty claims by running the GDS Battery Claim App. The App must be run right after an incident battery is removed from the vehicle or after a battery charge is completed which qualifies for a warranty. It must be run at any time between RO open and close dates.
Source components: ELECTRICAL SYSTEM.
Source record 10173545 at NHTSANHTSA communication ID: 10173541
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some Palisade (LX2) vehicles may intermittently experience the BCW Malfunction Indicator Light ON with a message Check Blind-Spot Collision Warning System displayed on the instrument cluster. This bulletin provides the service procedure to update the BCW system software to correct the intermittent BCW Malfunction Indicator Light.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10173541 at NHTSANHTSA communication ID: 10173540
NHTSA source summary · Original PDF not reviewed by Recallfolio
Hyundai is conducting a Service Campaign to update the Blind Spot Collision Warning (BCW) system software to correct an intermittent BCW malfunction indicator light. The affected vehicles include: ⢠Certain 2020 MY Palisade (LX2) Equipped with BCW
Source components: PARKING BRAKE:INDICATOR LIGHT.
Source record 10173540 at NHTSANHTSA communication ID: 10173539
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some Palisade (LX2) vehicles may intermittently experience the BCW Malfunction Indicator Light ON with a message âCheck Blind-Spot Collision Warning Systemâ displayed on the instrument cluster. This bulletin provides the service procedure to update the BCW system software to correct the intermittent BCW Malfunction Indicator Light.
Source components: POWER TRAIN:MANUAL TRANSMISSION:SHIFT PATTERN INDICATOR.
Source record 10173539 at NHTSANHTSA communication ID: 10172211
NHTSA source summary · Original PDF not reviewed by Recallfolio
If you are servicing an 8-speed front-wheel-drive vehicle with the DTC or symptoms listed below, refer to the Service Procedure to diagnose the condition.
Source components: ENGINE · POWER TRAIN.
Source record 10172211 at NHTSANHTSA communication ID: 10172144
NHTSA source summary · Original PDF not reviewed by Recallfolio
This service campaign provides the procedure to perform an AVN software update to a Palisade exhibiting the following condition: Unresponsive radio after multiple uses of voice recognition to perform navigational searches.
Source components: ELECTRICAL SYSTEM.
Source record 10172144 at NHTSANHTSA communication ID: 10172143
NHTSA source summary · Original PDF not reviewed by Recallfolio
After using voice search to navigate to a location, the radio may not respond. Follow the procedure in this bulletin to update the navigation system.
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10172143 at NHTSANHTSA communication ID: 10172142
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin describes the requirements for all wheel alignment and/or vehicle tracking claims and best practices when diagnosing and conducting alignment-related repairs for all models and model years.
Source components: SUSPENSION.
Source record 10172142 at NHTSANHTSA communication ID: 10170889
NHTSA source summary · Original PDF not reviewed by Recallfolio
If you are servicing an applicable vehicle with a Check Engine light on and one or more of the DTC listed below, follow the repair procedure and replace the related input/output speed sensor and oil pressure harness.
Source components: ENGINE AND ENGINE COOLING.
Source record 10170889 at NHTSANHTSA communication ID: 10170887
NHTSA source summary · Original PDF not reviewed by Recallfolio
If you are servicing an applicable vehicle with a Check Engine light on and one or more of the DTC listed below, follow the repair procedure and replace the related oil pressure harness with integrated oil temperature sensor.
Source components: ENGINE AND ENGINE COOLING.
Source record 10170887 at NHTSANHTSA communication ID: 10170886
NHTSA source summary · Original PDF not reviewed by Recallfolio
If you are servicing an applicable vehicle with a Check Engine light on and one or more of the DTC listed below, follow the repair procedure and replace the related solenoid and oil pressure harness.
Source components: ENGINE AND ENGINE COOLING.
Source record 10170886 at NHTSANHTSA communication ID: 10170883
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides guidelines to inspect the USB, head unit, and multi-box for common connection conditions. 2. This bulletin presents guidelines to inspect for common Android Auto and Apple CarPlay connection conditions. 3. This bulletin provides physical differences between the USB 2.0 port and USB 3.0 port.
Source components: ELECTRICAL SYSTEM.
Source record 10170883 at NHTSANHTSA communication ID: 10170895
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some Palisade (LX2) vehicles may intermittently experience the BCW Malfunction Indicator Light ON with a message Check Blind-Spot Collision Warning System displayed on the instrument cluster. When the BCW Malfunction Indicator Light is ON, the BCW function becomes inoperative. This bulletin provides the service procedure to update the BCW system software to correct the intermittent BCW Malfunction Indicator Light.
Source components: LANE DEPARTURE.
Source record 10170895 at NHTSANHTSA communication ID: 10170896
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components.
Source components: STEERING.
Source record 10170896 at NHTSANHTSA communication ID: 10170899
NHTSA source summary · Original PDF not reviewed by Recallfolio
This TSB provides a procedure to diagnose and repair a transaxle for the following Incorrect Ratio DTC (transaxle clutch slipping more than 200 rpm in gear).
Source components: POWER TRAIN.
Source record 10170899 at NHTSANHTSA communication ID: 10170516
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some Palisade (LX2) vehicles may intermittently experience the BCW Malfunction Indicator Light ON with a message ?Check Blind-Spot Collision Warning System? displayed on the instrument cluster. When the BCW Malfunction Indicator Light is ON, the BCW function becomes inoperative. When the BCW Malfunction Indicator Message turns ON, the diagnostic code C270354 (Control Module Slave Calibration) will be triggered.
Source components: ELECTRICAL SYSTEM.
Source record 10170516 at NHTSANHTSA communication ID: 10170515
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some Palisade (LX2) vehicles may intermittently experience the BCW Malfunction Indicator Light ON with a message ?Check Blind-Spot Collision Warning System? displayed on the instrument cluster. When the BCW Malfunction Indicator Light is ON, the BCW function becomes inoperative. This bulletin provides the service procedure to update the BCW system software to correct the intermittent BCW Malfunction Indicator Light. NOTE: When the BCW Malfunction Indicator Message turns ON, the diagnostic code C270354 (Control Module Slave Calibration) will be triggered.
Source components: ELECTRICAL SYSTEM.
Source record 10170515 at NHTSANHTSA communication ID: 10170512
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides information and procedures for collecting OBD ?In Use Monitor Performance Ratio? (IUMPR) data on certain 2019-2020MY vehicles at California dealers. This reporting is mandated by CARB (California Air Resources Board). Data is no longer submitted to Hyundai by datasheet and dealer email. Data is sent electronically by GDS when the procedure of this bulletin is followed.
Source components: EQUIPMENT.
Source record 10170512 at NHTSANHTSA communication ID: 10170511
NHTSA source summary · Original PDF not reviewed by Recallfolio
If you are servicing a vehicle with a transmission slipping concern, follow the Service Procedure shown below and perform a stall test. This TSB provides a procedure to test each clutch in the transmission. If the vehicle fails the stall test, replace the transmission. ? PASS: Stall speed is between 1700~2900 rpm (See shop manual for stall speed). ? FAIL: Engine revs to redline limit (6,000~6,500 rpm). If so, replace the transmission.
Source components: EQUIPMENT · POWER TRAIN.
Source record 10170511 at NHTSANHTSA communication ID: 10170509
NHTSA source summary · Original PDF not reviewed by Recallfolio
After using voice search to navigate to a location, the radio may not respond. Follow the procedure in this bulletin to update the navigation system.
Source components: EQUIPMENT.
Source record 10170509 at NHTSANHTSA communication ID: 10170506
NHTSA source summary · Original PDF not reviewed by Recallfolio
Hyundai is conducting a Service Campaign to replace the rear sunroof glass on certain 2020MY Palisade equipped with the rear sunroof.
Source components: VISIBILITY · VISIBILITY:SUN/MOON ROOF ASSEMBLY.
Source record 10170506 at NHTSANHTSA communication ID: 10170505
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin describes the procedure to replace the rear sunroof glass on certain 2020MY Palisade equipped with the rear sunroof.
Source components: VISIBILITY · VISIBILITY:SUN/MOON ROOF ASSEMBLY.
Source record 10170505 at NHTSANHTSA communication ID: 10169386
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin describes the procedure to replace the rear sunroof glass on certain 2020MY Palisade equipped with the rear sunroof.
Source components: VISIBILITY:GLASS, SIDE/REAR.
Source record 10169386 at NHTSANHTSA communication ID: 10169376
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides troubleshooting information on how to identify and repair whistling/wind noise that occurs around the door glass area while driving.
Source components: VISIBILITY:GLASS, SIDE/REAR.
Source record 10169376 at NHTSANHTSA communication ID: 10169370
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Blind Spot Detection (BSD) or Blind-Spot Collision Warning (BCW) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The BSD/BCW detects vehicles within the blind spot zone and gives off an alarm (visual and audible). The two magnetic radar sensors provide these functions for BSD/BCW: ? Senses other vehicles in the BSD/BCW zone and turns on the BSD/BCW warning lamp for the driver. The warning lamp starts blinking, along with an audible sound, when the driver turns on the turn signal lamp to enter the lane where another vehicle is driving.
Source components: BACK OVER PREVENTION · LANE DEPARTURE.
Source record 10169370 at NHTSANHTSA communication ID: 10167253
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides instruction detailing the proper methodology for scanning and uploading captured GDS data files to the Techline Repository. Compliance with this bulletin ensures that the GDS data files are correctly transferred and matched with a Techline Case number.
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10167253 at NHTSANHTSA communication ID: 10167757
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin describes the service procedure to inspect, and if necessary, correct a vibration on certain 2020MY Hyundai Palisade (LX2) AWD vehicles.
Source components: SUSPENSION.
Source record 10167757 at NHTSANHTSA communication ID: 10167250
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin describes the service procedure to inspect, and if necessary, correct a vibration on certain 2020MY Hyundai Palisade (LX2) AWD vehicles.
Source components: POWER TRAIN.
Source record 10167250 at NHTSANHTSA communication ID: 10165466
NHTSA source summary · Original PDF not reviewed by Recallfolio
If you are servicing an applicable vehicle with a ?Check Engine? light on and one or more of the DTC listed below, follow the repair procedure and replace the related oil pressure harness with integrated oil temperature sensor.
Source components: ELECTRICAL SYSTEM · ENGINE · EQUIPMENT.
Source record 10165466 at NHTSANHTSA communication ID: 10165465
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin describes the procedure for the Hyundai Palisade Launch Quality Monitoring Process (LQMP). Hyundai?s commitment to improving product quality includes monitoring all customer and dealer activities through a Launch Quality Monitoring Process (LQMP) for a minimum of 100 days after the launch of a new vehicle. The goal is to improve new model vehicle quality and proactively react to the Voice of the Customer (VOC).
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10165465 at NHTSANHTSA communication ID: 10165463
NHTSA source summary · Original PDF not reviewed by Recallfolio
If you are servicing an applicable vehicle with a ?Check Engine? light on and one or more of the DTC listed below, follow the repair procedure and replace the related input/output speed sensor and oil pressure harness.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10165463 at NHTSANHTSA communication ID: 10165462
NHTSA source summary · Original PDF not reviewed by Recallfolio
If you are servicing an applicable vehicle with a ?Check Engine? light on and one or more of the DTC listed below, follow the repair procedure and replace the related solenoid and oil pressure harness.
Source components: ELECTRICAL SYSTEM:STARTER ASSEMBLY:SOLENOID · ENGINE AND ENGINE COOLING.
Source record 10165462 at NHTSA