The manufacturer’s record · Page 16 of 26
Original record summaries, dates and identifiers for this model-year. Records 1,501–1,600 of 2,533, ordered newest first. Dated records on this page: Oct 5, 2015–Jan 8, 2016.
Back to 2015 GMC YUKON problems & recallsThis archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
NHTSA communication ID: 10112265
NHTSA source summary · Original PDF not reviewed by Recallfolio
This engineering informational bulletin is requesting information from dealers regarding the concern of a bang or loud noise with no forward or reverse ranges
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10112265 at NHTSANHTSA communication ID: 10112264
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on removing paint stains on the under side of protective shipping film
Source components: STRUCTURE:BODY.
Source record 10112264 at NHTSANHTSA communication ID: 10252172
NHTSA source summary · Original PDF not reviewed by Recallfolio
Radio Display May Momentarily Flicker When Vehicle Is First Started.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10252172 at NHTSANHTSA communication ID: 10252149
NHTSA source summary · Original PDF not reviewed by Recallfolio
HD Radio Turns On Unwanted When Using Radio Station Voice Command.
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10252149 at NHTSANHTSA communication ID: 10112261
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information regarding Part Restriction and Ordering Process Information for OnStar Vehicle Communication Interface Modules
Source components: EQUIPMENT:ELECTRICAL · EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).
Source record 10112261 at NHTSANHTSA communication ID: 10250069
NHTSA source summary · Original PDF not reviewed by Recallfolio
Delayed Engagement After Sitting With Engine Off
Source components: ENGINE AND ENGINE COOLING.
Source record 10250069 at NHTSANHTSA communication ID: 10250067
NHTSA source summary · Original PDF not reviewed by Recallfolio
Infotainment System Will Not Return to Media After Bluetooth Call Ends
Source components: EQUIPMENT:ELECTRICAL:INFOTAINMENT.
Source record 10250067 at NHTSANHTSA communication ID: 10247253
NHTSA source summary · Original PDF not reviewed by Recallfolio
Interior Electrical Center Left End Cap Fuse Label Error
Source components: ELECTRICAL SYSTEM.
Source record 10247253 at NHTSANHTSA communication ID: 10246556
NHTSA source summary · Original PDF not reviewed by Recallfolio
Delayed Engagement After Sitting With Engine Off
Source components: ENGINE AND ENGINE COOLING.
Source record 10246556 at NHTSANHTSA communication ID: 10115002
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles with engine oil consumption. If published Service Information for oil consumption with no fix. Remove the vacuum line from the back of the vacuum pump and inspect for oil. If oil is found then reference the latest version of PIT5361.
Source components: ENGINE · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10115002 at NHTSANHTSA communication ID: 10252155
NHTSA source summary · Original PDF not reviewed by Recallfolio
CD Player Inoperative.
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10252155 at NHTSANHTSA communication ID: 10114995
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician on a concern of body pressure booming. This concern may be more noticeable when the active fuel management is engages and the engine is in 4 cylinder mode. The roof sheet metal may not be attached to the roof bows any longer. If equipped with a sunroof it may leak or be misaligned with the roof. Technician is to follow the steps to apply vibration control material between the roof bow and the roof sheet metal. Any roof bow that is no longer bonded to the sheet metal must be repaired. Remove the old material with an appropriate tool. Once the old material is removed install the appropriate thickness foam shim to fill the gap between the roof sheet metal and the roof bow. The foam should be placed in 5 inch lengths and placed in 5 locations along the bow using vibration control material to fill the distance between the foam shim. If the space between the bow is 6 millimeters or less just use the vibration control material.
Source components: EQUIPMENT ADAPTIVE/MOBILITY · STRUCTURE.
Source record 10114995 at NHTSANHTSA communication ID: 10114989
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician how to diagnose vehicles with the CD player inoperative. If this concern is encountered, cycle the CD player fuse and re-evaluate the concern. If the concern is no longer present, replace the CD player. When the CD player is still found to be inoperative after cycling the fuse follow Service Information diagnostics.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10114989 at NHTSANHTSA communication ID: 10114988
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician about vehicles that may have a inoperative radio with Diagnostic Trouble Code U0184 set in modules and unable to communicate with the radio using the scan tool. Technician should remove power from the radio. If the radio starts working with a power cycle advise the customer that we apologize for this inconvenience and that General Motors is working on a permanent solution for this concern. After the power cycle and the radio is still inoperative record the radio power and ground readings and the voltage on the low speed data line.
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10114988 at NHTSANHTSA communication ID: 10114977
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about what XM offerings are available for vehicles. A dealer or customer can access the website listed below for vehicle specific XM offerings and availability.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · EQUIPMENT:ELECTRICAL.
Source record 10114977 at NHTSANHTSA communication ID: 10114958
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician on the step needed to diagnose and repair vehicles that may have uneven brake pad wear. Technician will need to inspect and measure the brake pads thickness. Also determine the customer?s driving style. The disc brake pads should only be replaced if the friction surface is worn to within?2.0?mm (0.079?in) of the mounting plates. The rotors and pads should be replaced with the updated part number If the pads are out of specification, perform normal Service Information diagnostics to determine the cause of the concern.
Source components: SERVICE BRAKES, HYDRAULIC.
Source record 10114958 at NHTSANHTSA communication ID: 10114954
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0442. Technician will need to review Techlink article from May 2013 titled "Using the Evaporative Emissions System Tester" Technician will need to follow these steps to help diagnose the issue. First after the P0442 has been verified do not disturb any of the fuel system components. The technician now can use the scan tool to close the Evaporative Emissions System. If possible change the tank pressure sensor units from inch_H2O to milimeter_Hg for better resolution. Now the vehicle can be stared to monitor the tank pressure sensor output value for approximately two minutes. If the tank pressure sensor value does change, pressurize the fuel tank side of the purge solenoid with the GE 41413-A / J 41413-A and the necessary adaptors. Now add smoke and allow pressure to stabilize for 2 minutes. If smoke is allowed to pass through the purge solenoid, replace the purge solenoid. If the tank pressure sensor value does not change, then install CH-48096 adaptor between the purge line from the canister and the purge solenoid. With the Evaporative Emissions System closed, pressurize the system through the CH-48096 adaptor and allow the system to completely stabilize, by observing the Press / Vac Gauge for a minimum of 5 minutes. Now add smoke to the system with GE 41413-A / J 41413-A after system stabilization. Now inspect the purge solenoid, engine side, fuel cap, canister vent solenoid filter and any line quick connects. When the leak is unable to be located, test under a vacuum condition. his type of leak may be detected by using the scan tool Purge/Seal function to create a vacuum in the Evaporative Emissions System and then observe the FTP sensor parameter for vacuum decay.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL · FUEL SYSTEM, GASOLINE · FUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY.
Source record 10114954 at NHTSANHTSA communication ID: 10250048
NHTSA source summary · Original PDF not reviewed by Recallfolio
Clunking Noise from Front of Vehicle During Turns and/or Bumps
Source components: BACK OVER PREVENTION.
Source record 10250048 at NHTSANHTSA communication ID: 10250047
NHTSA source summary · Original PDF not reviewed by Recallfolio
Clunking Noise from Front of Vehicle During Turns and/or Bumps
Source components: BACK OVER PREVENTION.
Source record 10250047 at NHTSANHTSA communication ID: 10248491
NHTSA source summary · Original PDF not reviewed by Recallfolio
Wind Buffeting Droan Type Noise And/Or Body Pressure Booming.
Source components: STRUCTURE · VISIBILITY:SUN/MOON ROOF ASSEMBLY.
Source record 10248491 at NHTSANHTSA communication ID: 10246535
NHTSA source summary · Original PDF not reviewed by Recallfolio
Clunking Noise from Front of Vehicle During Turns and/or Bumps
Source components: SUSPENSION.
Source record 10246535 at NHTSANHTSA communication ID: 10246534
NHTSA source summary · Original PDF not reviewed by Recallfolio
Clunking Noise from Front of Vehicle During Turns and/or Bumps
Source components: SUSPENSION.
Source record 10246534 at NHTSANHTSA communication ID: 10201125
NHTSA source summary · Original PDF not reviewed by Recallfolio
Information on Inside Rear view Mirror and Camera Loose
Source components: BACK OVER PREVENTION · FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA · VISIBILITY:REARVIEW MIRRORS/DEVICES:INTERIOR.
Source record 10201125 at NHTSANHTSA communication ID: 10201122
NHTSA source summary · Original PDF not reviewed by Recallfolio
Greese or Sealant Visible on Steering Gear - Should not be interpreted as Leak
Source components: EQUIPMENT · STEERING.
Source record 10201122 at NHTSANHTSA communication ID: 10201118
NHTSA source summary · Original PDF not reviewed by Recallfolio
Recovery Process from a Controller Reprogramming Interruption
Source components: ELECTRICAL SYSTEM · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
Source record 10201118 at NHTSANHTSA communication ID: 10201117
NHTSA source summary · Original PDF not reviewed by Recallfolio
Clunking Noise from Front of Vehicle During Turns and/or Bumps
Source components: EQUIPMENT · STRUCTURE:FRAME AND MEMBERS.
Source record 10201117 at NHTSANHTSA communication ID: 10201115
NHTSA source summary · Original PDF not reviewed by Recallfolio
OnStar Voice Fallback Number Update
Source components: COMMUNICATION:MANUFACTURER TELEMATICS · EQUIPMENT:ELECTRICAL.
Source record 10201115 at NHTSANHTSA communication ID: 10201098
NHTSA source summary · Original PDF not reviewed by Recallfolio
OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
Source components: ENGINE · POWER TRAIN · POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10201098 at NHTSANHTSA communication ID: 10190535
NHTSA source summary · Original PDF not reviewed by Recallfolio
Information on Inside Rear View Mirror and Camera Loose Some customers may comment that the inside rear view mirror or front camera is loose or that the mirror/camera mounting bracket is loose or has fallen off. If a vehicle is encountered with the above condition, do not attempt to reinstall the bracket onto the windshield. The above listed vehicles have a revised bracket design that is not serviceable. It is necessary to replace the windshield glass assembly. The bracket comes installed on the new glass assembly. Refer to Windshield Replacement in SI.
Source components: ELECTRICAL SYSTEM:ADAS:DRIVER MONITORING:CAMERA/SENSOR · VISIBILITY:REARVIEW MIRRORS/DEVICES.
Source record 10190535 at NHTSANHTSA communication ID: 10190521
NHTSA source summary · Original PDF not reviewed by Recallfolio
Clunking Noise from Front of Vehicle During Turns and/or Bumps Some customers may comment on a clunking noise originating from the front of the vehicle that is more predominant during turns or traveling over bumps. This may be caused by a damaged stabilizer shaft frame bracket. There have been some cases in which the bracket is cracked, as shown. This condition has been found to be the result of insufficient welds between the bracket and frame rail. There have been some cases on older vehicles of corrosion affecting the bracket
Source components: SUSPENSION:FRONT.
Source record 10190521 at NHTSANHTSA communication ID: 10190504
NHTSA source summary · Original PDF not reviewed by Recallfolio
IPC Odometer Programming Method Quick Reference Guide Season Odometer Programming Methods in Use Today 1. IPC reprogramming and setup using the service programming system (SPS). 2. Odometer setup at the electronic service center (ESC) when using an exchange IPC/DIC. 3. Tech 2® The Tech 2 is used to set up a replacement BCM, which includes loading the odometer value that is displayed and stored in the IPC. A replacement IPC will display the previously stored vehicle odometer value, communicated from the BCM, after cycling the ignition or driving the vehicle. *The odometer programming is integrated as part of the BCM programming procedure. It is not a stand-alone event.
Source components: ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10190504 at NHTSANHTSA communication ID: 10190503
NHTSA source summary · Original PDF not reviewed by Recallfolio
OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
Source components: ENGINE · POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10190503 at NHTSANHTSA communication ID: 10190387
NHTSA source summary · Original PDF not reviewed by Recallfolio
Recovery Process from a Controller Reprogramming Interruption During service reprogramming of the T87 TCM, some technicians may notice the TCM may fail during the reprogramming event and become unresponsive to the Service Programming System (SPS), unresponsive to the GDS2 tool. This bulletin addresses corrective actions to attempt to recover the module before declaring the TCM as a bad part and replacing. During reprogramming, an interruption can cause the module to lock up. A module reset may recover the TCM
Source components: ELECTRICAL SYSTEM:SOFTWARE · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
Source record 10190387 at NHTSANHTSA communication ID: 10137258
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information for technicians on the reuse of fasteners and the proper reading of torque specifications.
Source components: EQUIPMENT.
Source record 10137258 at NHTSANHTSA communication ID: 10115143
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the grounds ring terminal at the engine block for the bank with the concern and repair the wire.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR.
Source record 10115143 at NHTSANHTSA communication ID: 10115142
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have the oil pressure gauge jumps from approximately 40 lb. to 60 lb. The 4.3L (L83), 5.3L (L86), 6.2L (LV3) engines are equipped with a two stage oil pump. Dealer should advise the customer this is normal operation for these engines.
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10115142 at NHTSANHTSA communication ID: 10137255
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides additional information to the technician on how to check for Tire Radial Force Variations and the difference between balancing a flange and flangeless rim.
Source components: TIRES · TIRES:BEAD · TIRES:TREAD/BELT · WHEELS:RIM.
Source record 10137255 at NHTSANHTSA communication ID: 10115138
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have had multiple repair attempts are being performed on customer?s vehicles that exhibit vibration conditions without utilizing the support of General Motors Technical Assistance Center. If valid vibration frequency or Road Force Variation data has been collected and a repair attempt does not correct the customer complaint, contact General Motors Technical Assistance Center for further support. For any vehicles that remains unrepaired after being at the dealer for three days or more and a related bulletin or PI is not found, contact General Motors Technical Assistance Center for further support.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · SUSPENSION.
Source record 10115138 at NHTSANHTSA communication ID: 10115135
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have the rear vision camera system displaying "Rear Park Assist Symbols Unavailable" and the steering grid lines displayed do not show. If the vehicle is in reverse, the rear vision camera will display "Rear Park Assist Symbols Unavailable" and does not have Regular Production Option Code UD5 or UD7 the radio must be updated using Service Programming System to correct this concern. Some vehicles may not show steering guide/grid lines displayed in the Rear Vision Camera display. Dealer should communicate to the customer that steering guide/grid lines are not available with this base radio Regular Production Option Code (IO3). Some vehicles while in reverse and the rear park assist system detects an object, the warning triangle symbol is displayed on the wrong side of the radio display. Engineering is aware of the issue and updated radio/tuner calibrations will be released shortly.
Source components: ELECTRICAL SYSTEM · LANE DEPARTURE · STEERING.
Source record 10115135 at NHTSANHTSA communication ID: 10137253
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides repair information to correct a customer concern of engine misfire/tick noise, Malfunction Indicator Lamp (MIL) On, DTC P0300 set.
Source components: ENGINE.
Source record 10137253 at NHTSANHTSA communication ID: 10115128
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicle's odometer appears to be inaccurate relative to a known distance traveled. Technician should obtain a hand-held GPS unit to test the odometer. If a hand held GPS unit is not available, the only other option is to verify the miles traveled using a surveyor's wheel or a dynamometer.
Source components: EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).
Source record 10115128 at NHTSANHTSA communication ID: 10137249
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on a GM of Canada OnStar cellular communication upgrade.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10137249 at NHTSANHTSA communication ID: 10137248
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides windshield replacement information to correct a customer concern that the inside rear view mirror is loose or that the mirror mounting bracket is loose or has fallen off.
Source components: VISIBILITY:REARVIEW MIRRORS/DEVICES · VISIBILITY:WINDSHIELD.
Source record 10137248 at NHTSANHTSA communication ID: 10137246
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on a GM of Canada OnStar cellular communication upgrade.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10137246 at NHTSANHTSA communication ID: 10115125
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician that the Human Machine Interface, Radio or Tuner, radio controls, Integrated Center Stack, display, and Media Disc Players are placed on restriction through the General Motors Technical Assistance Center. Dealer will need to contact General Motors Technical Assistance Center for further assistance.
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10115125 at NHTSANHTSA communication ID: 10115124
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician that the 8L90 8 speed automatic transmission restriction has ended.
Source components: POWER TRAIN.
Source record 10115124 at NHTSANHTSA communication ID: 10137245
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information to dealership personnel regarding original equipment battery part numbers and AC Delco replacement battery approved warranty part numbers.
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY · EQUIPMENT:ELECTRICAL.
Source record 10137245 at NHTSANHTSA communication ID: 10137237
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin adds the 2016 model year to a communication which provides dealership personnel revised wiring repair labor operations and required additional information.
Source components: ELECTRICAL SYSTEM:WIRING.
Source record 10137237 at NHTSANHTSA communication ID: 10137232
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides repair information to correct customer concerns about blank screen after startup and reverse, rear view camera message on, touch screen inoperable, Bluetooth and navigation concerns.
Source components: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA · EQUIPMENT:ELECTRICAL.
Source record 10137232 at NHTSANHTSA communication ID: 10115119
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician for a reduced power message, steering assist, engine stall or the instrument panel, radio, and or Heater-Vent-Air Conditioning go blank with multiple diagnostic trouble codes. If any of the following diagnostic trouble codes U0073, U0078, U0029, U0028, U0415, U0140, U0126, U0121, U0101, U0100, C0544, U1510, U0073, B127B, B2605, B3600,C0800, U0428, and U0452 set in the vehicle. Check the body control module ground at the G218 location. The front dash insulator mat may be trapped between the ground eyelet and the body stud. Remove the round nut and eyelet and cut the front dash insulator mat away from the ground stud so it no longer interferes with the ground stud and reinstall the eyelet and ground nut.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:APPLIANCE:AIR CONDITIONER · POWER TRAIN · STEERING.
Source record 10115119 at NHTSANHTSA communication ID: 10115118
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician that on November 18th, 2014, part number 23248791 (Wireless Charging Module) will be placed on restriction through the General Motors Technical Assistance Center. Dealer will need to contact General Motors Technical Assistance Center for further assistance.
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10115118 at NHTSANHTSA communication ID: 10115114
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about customers that may request the factory Integrated Trailer Brake Controller Regular Production Option Code (JL1) be installed on their Full-Size Pickup or SUV when the vehicle was not ordered with the option. Dealer should advise the customer it cannot be added to the vehicle.
Source components: ELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL.
Source record 10115114 at NHTSANHTSA communication ID: 10075749
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: SERVICE BRAKES.
Source record 10075749 at NHTSANHTSA communication ID: 10075726
NHTSA source summary · Original PDF not reviewed by Recallfolio
Effective November 18th, 2014, P/N 23248791 (Wireless Charging Module) will be placed on restriction through the General Motors Technical Assistance Center (TAC). A customer may comment on one or more of the following issues with the wireless charger. 1. My phone does not charge. 2. My phone charges very slow. 3. My phone moves out of charging spot (bulls eye graphic on the charging mat). 4. My phone charges intermittently.
Source components: ELECTRICAL SYSTEM.
Source record 10075726 at NHTSANHTSA communication ID: 10115108
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician with tips on the Text Messaging feature that is available on some newer General Motors infotainment systems.
Source components: EQUIPMENT ADAPTIVE/MOBILITY · EQUIPMENT:ELECTRICAL.
Source record 10115108 at NHTSANHTSA communication ID: 10115107
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have a service engine soon malfunction indicator lamp, antilock braking system malfunction indicator lamp, service suspension system message, misfire, hesitation, no crank, heater-vent-air conditioning inoperative. Technician may find F11UA, F104UA, F35UA, and or F60UA blown. Technician should inspect the engine harness near the vacuum pump pulley to be chafing. Technician will need to reroute the wire harness and repair and damaged wires.
Source components: ELECTRICAL SYSTEM:WIRING.
Source record 10115107 at NHTSANHTSA communication ID: 10115105
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have any of these concerns remote keyless entry, passive Entry and Start Inoperative, No Fob detect message on driver information center, service tire pressure system, no audio, touch screen Inoperative, Steering Wheel Controls Inoperative, Service Stabilitrak, rear power windows inoperative, rear wiper inoperative, and or a dead battery. Technician may find Diagnostic Trouble Codes B3101, B144C, C0710, C0544, U1548, U1549, U154A, U0151, U0126, U0415, U0077, U0028 and/or U0029. Technician should inspect the left instrument panel for the wire harness being pinched. Technician will need to repair the wire harness and reroute the wire harness.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10115105 at NHTSANHTSA communication ID: 10137226
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin adds the 2016 model year to diagnostic tips and repair information to correct a customer concern of reduced acceleration at low speed and/or transmission slipping from a launch, DTC P0751 set.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10137226 at NHTSANHTSA communication ID: 10137225
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides radio programming information to correct customer concerns about no XM audio or time shift, radio lock-up, slow response, vertical line between clock and temperature, poor FM reception (Truck Only).
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10137225 at NHTSANHTSA communication ID: 10115102
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have a content theft alarm sounding for no apparent reason. Technician may use all published Service Information diagnostics and has not found the cause of the unwanted content theft alarm sounding. Technician should use Global Diagnostic System 2 to review the Body Control Module parameters for "Content Theft Deterrent Trigger History". This is a list of triggers that can cause a content theft alarm sounding. Driver door Passenger door, Left rear door, Right rear door, Rear closure, Tonneau Cover, Hood, Ignition Voltage, Intrusion, Inclination, Telematics enhanced service alarm, Battery reconnect detected, Unauthorized Pulse Width Modulated change, Security Indicates Tamper, and Glass Breakage. If the trigger is an Intrusion inspect for items hanging from the rear view mirror, solar powered dancing characters. When the trigger is a Glass breakage inspect the two rear quarter-panel windows and also in the liftgate glass. The quarter panel windows are attached to the body harness with a connector that looks similar to a 9 volt battery connector inspect them to be fully seated in on the glass. When the trigger is Ignition Voltage/Battery reconnect detected during a cold ambient temperature remote vehicle start event technician should call GM General Motors Technical Assistance Center for further assistance.
Source components: EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES.
Source record 10115102 at NHTSANHTSA communication ID: 10075716
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers may comment that the vehicle has reduced acceleration at low speed and/or transmission is slipping from a launch. Technicians may find DTC P0751 set or stored in history. This condition may be caused by the Clutch Select Solenoid Valve 2 (359), located in the lower valve body, sticking in its bore resulting in a 4th gear start. Note: This condition can be very intermittent and difficult to duplicate.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10075716 at NHTSANHTSA communication ID: 10137219
NHTSA source summary · Original PDF not reviewed by Recallfolio
This engineering information bulletin announces the end of need for information from the field regarding A/C inoperative or poor performance on recent built vehicles.
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10137219 at NHTSANHTSA communication ID: 10115094
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have a squeak, clunk, or knock type noise from the front suspension when hitting bumps. Technician should use published Service Information diagnostics. If the source of the noise has been pinpointed to either the left or right front strut, and if the strut has not been previously disassembled technician will need to contact the General Motors Technical Assistance Center for more information.
Source components: SUSPENSION.
Source record 10115094 at NHTSANHTSA communication ID: 10190533
NHTSA source summary · Original PDF not reviewed by Recallfolio
Grease or sealant visible on steering gear - should not be interpreted as leak. Some customers or technicians may comment on seeing grease or sealant on certain locations of the steering gear. The illustrations below include arrows showing the areas on the steering gear that the supplier intentionally applies sealing grease. Any of these locations have the potential of showing visible grease under normal operation.
Source components: STEERING:GEAR BOX (OTHER THAN RACK AND PINION).
Source record 10190533 at NHTSANHTSA communication ID: 10072092
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: ENGINE.
Source record 10072092 at NHTSANHTSA communication ID: 10126401
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on the PQC assembly replacement process - for dealers required to contact PQC prior to replacing an assembly (U.S. and Canada only).
Source components: STRUCTURE.
Source record 10126401 at NHTSANHTSA communication ID: 10114937
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician when Service Information diagnostics indicates a fuel injector may need to be removed for a repair or replaced the injector will need a new seal. This Preliminary Information contains all the O-ring seal and the injector kit part numbers.
Source components: FUEL SYSTEM, OTHER:FUEL INJECTION SYSTEM.
Source record 10114937 at NHTSANHTSA communication ID: 10114934
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about being to achieve pre-load when setting up the pinion bearing pre-loads during reassembly of the 9.5/9.76 inch rear axles. Technician will need to use pinion gear install washer part number 11609638 onto the pinion shaft between the flange and nut. Tighten the pinion nut until you achieve 10 pound inch or 1.0 newton rotating torque. After the torque has been achieved back the nut off and remove the washer. Tighten the nut back down until you achieve 15 pound inch or 1.7 newton meters for used bearings or 20 pound inch 2.25 newton meters for new bearings.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10114934 at NHTSANHTSA communication ID: 10075412
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: EQUIPMENT.
Source record 10075412 at NHTSANHTSA communication ID: 10114932
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that when shutting the vehicle off when the radio is turned off prior, the radio will turn back on in the muted condition on the next key cycle. No action should be taken at this time as this is considered a normal operating characteristic.
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10114932 at NHTSANHTSA communication ID: 10126395
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
Source components: ENGINE AND ENGINE COOLING.
Source record 10126395 at NHTSANHTSA communication ID: 10135182
NHTSA source summary · Original PDF not reviewed by Recallfolio
15038 - Dealer Message Only - Not a Field Action. Select 2015 model year vehicles will receive a software download via OnStar® to update the software for the Electronic Climate Control (ECC) system. This over-the-air update is being piloted on a few hundred customer vehicles in the mid-October thru mid-December timeframe. Pending the successful completion of the pilot, rollout to the general vehicle population will begin in January 2016.
Source components: ELECTRICAL SYSTEM.
Source record 10135182 at NHTSANHTSA communication ID: 10126417
NHTSA source summary · Original PDF not reviewed by Recallfolio
15038 - Dealer Message Only - Not a Field Action. Select 2015 model year vehicles will receive a software download via OnStar® to update the software for the Electronic Climate Control (ECC) system. This over-the-air update is being piloted on a few hundred customer vehicles in the mid-October thru mid-December timeframe. Pending the successful completion of the pilot, rollout to the general vehicle population will begin in January 2016.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10126417 at NHTSANHTSA communication ID: 10126393
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provides policy information on an updated warranty and policy exchange program for electronic products through GM authorized Electronic Service Centers (ESCs) (U.S. and Canada).
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10126393 at NHTSANHTSA communication ID: 10114926
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have extended or long crank time during cold ambient air temperatures. Direct Injection systems run at higher pressures, and the mechanical pump on the engine must build up the required pressure before the first injection event occurs. Direct Injection engines may have slightly longer cold crank times than that of port fuel engines.
Source components: ENGINE · EQUIPMENT:MECHANICAL · FUEL SYSTEM, OTHER:FUEL INJECTION SYSTEM.
Source record 10114926 at NHTSANHTSA communication ID: 10126390
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin adds the 2016 model year and provides technicians with repair information to correct a customer concern of rough, uneven or irregular horizontal seam on liftgate.
Source components: STRUCTURE:BODY:HATCHBACK/LIFTGATE.
Source record 10126390 at NHTSANHTSA communication ID: 10126386
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin adds the 2016 model year to repair information to correct a customer concern of the hood fluttering, vibrating or displaying visible motion at highway speeds or over rough road surfaces.
Source components: STRUCTURE:BODY:HOOD.
Source record 10126386 at NHTSANHTSA communication ID: 10126385
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin adds the 2014 - 2016 model years to cleaning information to correct a customer concern of seeing a white film/residue on the IP pad and/or door trim panels.
Source components: ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT:ELECTRICAL.
Source record 10126385 at NHTSANHTSA communication ID: 10126384
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin adds the 2015 Chevrolet Colorado and GMC Canyon to diagnosis and repair information to correct a customer concern of alleged no park, vehicle rolls in park or park will not hold.
Source components: PARKING BRAKE.
Source record 10126384 at NHTSANHTSA communication ID: 10114912
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician for vehicles that exhibit a driver?s power memory seat and power adjustable pedals inoperative. Look for poor terminal tension at the left instrument panel fuse block connector X1 terminals 27 and 28. If poor retention is found in these terminals replace them with terminated lead part number 19301761.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:MECHANICAL · SEATS:FRONT ASSEMBLY:POWER ADJUST.
Source record 10114912 at NHTSANHTSA communication ID: 10114903
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have an issue when using Bluetooth voice recognition with an iPhone. Technician should work with the customer to insure the phone contacts to not have any Emojis loaded to any contact.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10114903 at NHTSANHTSA communication ID: 10114902
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a detent / click with a feel of increased resistance when the accelerator pedal is about ¾ of the way. The new accelerator pedal design has a built-in detent position near the last 1/4 of pedal travel. Dealer should communicate to the customer this is a normal operating characteristic of the vehicle and no repair attempts should be performed.
Source components: VEHICLE SPEED CONTROL:ACCELERATOR PEDAL.
Source record 10114902 at NHTSANHTSA communication ID: 10114900
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles with tire sidewall irregularities. This is a visual condition that will not affect durability, reliability or performance of the tires. Dealer should communicate to the customer that slight sidewall indentations are a common characteristic of radial tire construction.
Source components: TIRES:SIDEWALL.
Source record 10114900 at NHTSANHTSA communication ID: 10126375
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information to dealership personnel on the use of non-GM approved battery chargers and booster packs.
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10126375 at NHTSANHTSA communication ID: 10114895
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have a pop, click, tick, snap, or itch type noise in the steering column when turning left or right during low speeds or parking maneuvers. Technician will need to replace the column upper bearing inner race, spring, and seat.
Source components: STEERING.
Source record 10114895 at NHTSANHTSA communication ID: 10114894
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vibration complaints that are one of the most challenging complaints to accurately diagnose and repair. Technician will need to use Pico Oscilloscope Diagnostic Kit to effectively diagnosis vehicles. Technician should drive the vehicle will using the Pico Oscilloscope to record data. After the data is recorded it should be reviewed to determine the root cause of the concern. If a repair attempt made the concern better but not eliminated or had no affect at all, and are requesting assistance from General Motors Technical Assistance Center record another Pico file and save it to the computer. After the new Pico Oscilloscope data has been saved email the data to General Motors Technical Assistance Center in the subject line include ?Vibration? ?Business Associate Code? and the last 8 of the Vehicle Identification Number.
Source components: STRUCTURE:FRAME AND MEMBERS · SUSPENSION.
Source record 10114894 at NHTSANHTSA communication ID: 10126371
NHTSA source summary · Original PDF not reviewed by Recallfolio
This engineering information bulletin announces the end of need for information from the field regarding a customer concern that one or more key transmitter(s) inoperative/not detected or passive entry inoperative while transmitter functions operate as intended.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10126371 at NHTSANHTSA communication ID: 10126370
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information to dealership personnel on proper engine and automatic transmission/transaxle identification.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · POWER TRAIN.
Source record 10126370 at NHTSANHTSA communication ID: 10126369
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information that may be useful in diagnosing/testing batteries that have set for a long period of time and/or set in cold weather climates to correct a customer concern of symptoms that include, but not limited to, a slow or no crank condition that may be caused by a discharged battery.
Source components: ELECTRICAL SYSTEM.
Source record 10126369 at NHTSANHTSA communication ID: 10114893
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician that the part restriction on the 8L45/8L90 8 speed and the LCT1000 6 Speed Allison automatic transmission has ended.
Source components: POWER TRAIN.
Source record 10114893 at NHTSANHTSA communication ID: 10114892
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that have a click, rattle or a squeak nose coming from the dash. Technician will use Service Information to locate the Accessory AC and DC Power Control Module located to the right of the steering column. Remove the power inverter module and apply two sided tape to the module bracket to insulate it from the mount. The instrument panel accessory bezel will also need to be removed. Apply flocking tape to the instrument panel accessory bezel retainers. Also the instrument panel extension will need to be removed. Apply foam tape around connectors located under grill to prevent them from rattling on grill. Apply flocking tape to the instrument panel extension retainers and apply a strip of foam tape along the edge of the grill to isolate the grill from the dash.
Source components: ELECTRICAL SYSTEM.
Source record 10114892 at NHTSANHTSA communication ID: 10114891
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician on the step to diagnose and repair the vehicles that may have a shake or shudder during light throttle acceleration, between 30 and 65 mph steady state driving. Also shudder feeling that may be described as driving over rumble strips or rough pavement. Technician will drive the vehicle and monitor the torque converter clutch slip. The torque converter clutch slip speed should be 10 rpm or less also note if the shudder takes place during torque converter clutch apply. If the torque converter clutch slip speed is in the range of 10 RPM or less the condition is possibly related to engine performance. If the shudder is only present in 4 cylinder mode and torque converter clutch slip is 10 rpm or less deem the shudder concern normal characteristic of Active Fuel Management. If the slip speed is beyond 10 rpm or there is shudder during torque converter clutch apply the torque converter will need to be replaced with a updated part number.
Source components: EQUIPMENT ADAPTIVE/MOBILITY · POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10114891 at NHTSANHTSA communication ID: 10114889
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles with a crankshaft balancer appears to be out of balance or wobbling while watching it with the engine running. Technician will need to check crankshaft balancer run out. If the balancer run out is greater than 0.25mm the crankshaft balancer will need to be replaced.
Source components: ENGINE · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10114889 at NHTSANHTSA communication ID: 10114887
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on. Technician will find Diagnostic Trouble Codes P0340 and P0341 setting at times. Technician should use normal published Service Information diagnostics. If normal Service Information diagnostics does not isolate the concern, inspect for corrosion in connector X154 located on the front cover next to the vacuum pump.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10114887 at NHTSANHTSA communication ID: 10114884
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that are equipped with Hands Free Power Lift-gate Regular Production Option Code (TC2). Some customers may experience problems with the activation of the lift-gate hands free operation. Dealer will communicate to the customer some tips on the Hands free Lift-gate. The remote keyless entry FOB must be within 3 feet or 1 meter from the bumper. The foot kick is conducted at the direct center of the length of kick zone.
Source components: STRUCTURE:BODY:HATCHBACK/LIFTGATE.
Source record 10114884 at NHTSANHTSA communication ID: 10114883
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that are equipped with 6L80 Regular Production Option Code (MYC), 6L90 Regular Production Option Code (MYD) or 8L90 Regular Production Option Code (M5U) Automatic Transmission. Starting with the 2013 model year, Full Size Trucks and Utilities now have Powertrain Grade Braking. Powertrain grade braking assists when driving on a downhill grade to help maintain desired vehicle speed by using the engine and transmission to slow the vehicle.
Source components: ENGINE · POWER TRAIN · SERVICE BRAKES, HYDRAULIC:POWER ASSIST.
Source record 10114883 at NHTSANHTSA communication ID: 10114875
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have an inoperative radio. Technician may find Diagnostic Trouble Code U0184 stored in multiple modules. If the concern is present at the dealership technician will need to contact General Motors Technical Assistance Center for further assistance if within 4 hours from Warren, Michigan. Technician should remove power from the radio. If the radio starts working with a power cycle advise the customer that we apologize for this inconvenience and that General Motors is working on a permanent solution for this concern. After the power cycle and the radio is still inoperative record the radio power and ground readings and the voltage on the low speed data line.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10114875 at NHTSANHTSA communication ID: 10114874
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that the lift-gate actuator or strut that is going to be removed or replaced. If the actuator or strut comes loose off a ball stud after it has been reinstalled. Technician will need to replace the ball stud or ball stud w/bracket, the actuator or strut, and ensure the ball socket clips are properly orientated and seated to prevent it from reoccurring.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · STRUCTURE:BODY:HATCHBACK/LIFTGATE · STRUCTURE:BODY:HATCHBACK/LIFTGATE:SUPPORT DEVICE/STRUT.
Source record 10114874 at NHTSANHTSA communication ID: 10126355
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provides policy information on Causal Part requirements for transactions submitted to GM for payment.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10126355 at NHTSANHTSA communication ID: 10126350
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provides policy information on an updated warranty and policy exchange program for electronic products through GM authorized Electronic Service Centers (ESCs) (U.S. and Canada).
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10126350 at NHTSA