The manufacturer’s record · Page 1 of 2

2014 Ford FOCUS
Manufacturer communications & TSBs.Page 1

Original record summaries, dates and identifiers for this model-year. Records 1–100 of 147, ordered newest first. Dated records on this page: Aug 4, 2015–Apr 29, 2026.

Back to 2014 Ford FOCUS problems & recalls
Read the applicability before drawing a conclusion.

This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.

NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.

Apr 29, 2026Other

25H05 S1

NHTSA communication ID: 11031792

NHTSA source summary · Original PDF not reviewed by Recallfolio

Harvest Program 25H05 – Supplement #1 Certain 2011-2021 Model Year Vehicles Software Verification Harvest Program

Source components: ELECTRICAL SYSTEM · UNKNOWN OR OTHER.

Source record 11031792 at NHTSA
Feb 24, 2026Service Bulletin/Repair Instructions

SSM 54601

NHTSA communication ID: 11029052

NHTSA source summary · Original PDF not reviewed by Recallfolio

Ford and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory wireless keyless entry keypad systems may or may not come with a wallet card containing the master code. Unlike the integrated wired keypad, the accessory wireless keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool or from the label printed on the body control module (BCM). The Factory Keyless Entry Code application within the diagnostic scan tool will not provide an applicable master code for the accessory wireless keypad. If the wallet card for an accessory keypad is not available, the "Wireless RF Keypad Diagnosis Guide" can be referenced and provides direction on how to retrieve the master code. This guide is located under the Workshop Manual tab > Accessories > Installation > Wireless RF Keypad Diagnosis Guide > PPT C > Step C2.<br /><br /> Note: The only available keypad for some vehicles from the assembly plant is the accessory wireless keyless entry keypad. The integrated wired keypad cannot be installed on vehicles not equipped from the factory with a wired keyless entry k

Source components: ELECTRICAL SYSTEM · STRUCTURE:BODY · UNKNOWN OR OTHER.

Source record 11029052 at NHTSA
Nov 19, 2025Other

25H05

NHTSA communication ID: 11026013

NHTSA source summary · Original PDF not reviewed by Recallfolio

This is a proactive investigation program by Ford Motor Company to inspect a limited number of affected vehicles that are customer-owned. Ford is voluntarily conducting this program to evaluate the software currently installed on one or more electronic modules in the affected vehicles.

Source components: ELECTRICAL SYSTEM · UNKNOWN OR OTHER.

Source record 11026013 at NHTSA
Dec 4, 2024Other

24N07

NHTSA communication ID: 11012235

NHTSA source summary · Original PDF not reviewed by Recallfolio

Certain 2012 – 2018 Model Year Focus Vehicle Line One-Time Canister Purge Valve Replacement

Source components: UNKNOWN OR OTHER.

Source record 11012235 at NHTSA
Oct 10, 2024Service Bulletin/Repair Instructions

SSM 53040

NHTSA communication ID: 11008948

NHTSA source summary · Original PDF not reviewed by Recallfolio

While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions. While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions.

Source components: UNKNOWN OR OTHER.

Source record 11008948 at NHTSA
Apr 24, 2024Service Bulletin/Repair Instructions

SSM 52476

NHTSA communication ID: 10254138

NHTSA source summary · Original PDF not reviewed by Recallfolio

All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.

Source components: EQUIPMENT.

Source record 10254138 at NHTSA
May 4, 2023Service Bulletin/Repair Instructions

14M02 S7

NHTSA communication ID: 10237441

NHTSA source summary · Original PDF not reviewed by Recallfolio

Certain 2011 through 2015 Model Year Fiesta and 2012 through 2016 Model Year Focus Vehicles Equipped with a DPS6 Automatic Transmission Transmission Control Module Extended Warranty Coverage REASON FOR THIS SUPPLEMENT • Due to ongoing limited part availability, program terms have been revised. • Vehicle pickup & delivery has been added. • Labor allowance table has been updated. • Additional repairs updated. • Added Attachment VI Mobile Repair/Vehicle Pickup and Delivery Record. • Added Attachment VII Mobile Repair Assessment.

Source components: POWER TRAIN.

Source record 10237441 at NHTSA
Apr 4, 2023Service Bulletin/Repair Instructions

SSM 51536

NHTSA communication ID: 10235153

NHTSA source summary · Original PDF not reviewed by Recallfolio

For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.

Source components: STRUCTURE.

Source record 10235153 at NHTSA
Nov 7, 2022Service Bulletin/Repair Instructions

14M02 06

NHTSA communication ID: 10226944

NHTSA source summary · Original PDF not reviewed by Recallfolio

Certain 2011 through 2015 Model Year Fiesta and 2012 through 2016 Model Year Focus Vehicles Equipped with a DPS6 Automatic Transmission; Transmission Control Module Extended Warranty Coverage REASON FOR THIS SUPPLEMENT Non-Ford Part Usage: • Vehicles that are still covered by the 8 years/80,000-mile Emissions warranty coverage MUST be serviced with a NEW Ford Motor Company TCM. • Vehicles outside of or exceeding the 8 years/80,000-mile coverage are authorized to use a used Ford Motor Company TCM, a refurbished original Ford TCM, or an aftermarket TCM that will successfully complete the required Ford software updates.

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · POWER TRAIN · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM) · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE.

Source record 10226944 at NHTSA
Aug 3, 2022Service Bulletin/Repair Instructions

TSB 22-2309

NHTSA communication ID: 10218617

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2013-2017 C-MAX Energi, 2013-2018 Focus battery electric vehicle (BEV), 2013-2020 Fusion plug-in hybrid electric vehicle (PHEV), 2015-2017 MKZ/MKZ Hybrid/MKC, 2016-2017 MKX and 2017 Continental vehicles equipped with 8 inch or larger center display screen may be unable to complete modem authorization after 3G to 4G modem upgrade was performed. No Authorization Pop-up will be displayed on the center display screen during the Authorization process. The vehicle may also not have proper functionality of remote app features such as remote start, return odometer, fuel information, or vehicle location incorrect in the app. This may be due to the SYNC software. To correct the condition, follow the Service Procedure to toggle Valet Mode.

Source components: EQUIPMENT:ELECTRICAL:INFOTAINMENT.

Source record 10218617 at NHTSA
Jun 21, 2022Service Bulletin/Repair Instructions

TSB 22-2230

NHTSA communication ID: 10214758

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2013-2017 C-MAX Energi, 2013-2018 Focus battery electric vehicle (BEV), 2013-2020 Fusion plug-in hybrid electric vehicle (PHEV), 2015-2017 MKZ/MKZ Hybrid/MKC, 2016-2017 MKX and 2017 Continental vehicles equipped with SYNC screens 8 inch or larger may be unable to complete modem authorization after 3G to 4G modem upgrade was performed. No Authorization Popup will be displayed on SYNC infotainment screen during the Authorization process. The vehicle may also not have proper functionality of remote app features such as remote start, and return odometer and fuel information to the app. This may be due to the SYNC software. To correct the condition, follow the Service Procedure to toggle Valet Mode.

Source components: ELECTRICAL SYSTEM:PROPULSION SYSTEM:HYBRID MANAGEMENT:POWER CONTROL UNIT/MODULE (HPCU):SOFTWARE · UNKNOWN OR OTHER.

Source record 10214758 at NHTSA
Nov 4, 2021Service Bulletin/Repair Instructions

SSM 50258

NHTSA communication ID: 10203850

NHTSA source summary · Original PDF not reviewed by Recallfolio

Various 2012-2015 vehicles equipped with a 3G modem may experience a lack of 3G modem performance. This may be due to the 3G cellular service functionality being decommissioned starting August 2021 and through March 2022. As the 3G cellular service is decommissioned, vehicles equipped with the 3G telematics control unit (TCU) will lose MyFord Mobile and MyLincoln Mobile app functionality/connectivity. Repair or Replacement of the TCU should no longer be performed using existing service stock. Replacement of the 3G TCU for this concern will result in programming concerns and repairs should not be performed.

Source components: COMMUNICATION:MANUFACTURER TELEMATICS · UNKNOWN OR OTHER.

Source record 10203850 at NHTSA
Jul 30, 2021Service Bulletin/Repair Instructions

14M02-S5

NHTSA communication ID: 10199780

NHTSA source summary · Original PDF not reviewed by Recallfolio

Ford is extending the warranty coverage on the DPS6 automatic transmission TCM to 10 years of service or 150,000 miles from the warranty start date of the vehicle, whichever occurs first. This extended warranty coverage will address intermittent symptoms of loss of transmission engagement while driving, no-start, or a lack of power.

Source components: POWER TRAIN.

Source record 10199780 at NHTSA
May 12, 2021Service Bulletin/Repair Instructions

SSM 49798

NHTSA communication ID: 10194415

NHTSA source summary · Original PDF not reviewed by Recallfolio

2015-2018 Focus service parts transmissions part # F1FP-7000-VB / F1FZ-7000-P built on 1-Aug-2020 and through 01-Mar-2021 may have an incorrect input speed sensor A (ISSA) shim thickness. This may cause an intermittent input speed sensor diagnostic trouble code (DTC). In the event of shift issues or skip shift events, check and verify that the ISSA speed sensor shim is 2.0 mm (0.079 in) F1FZ-7Z101-A before proceeding with further diagnostics.

Source components: ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER:SENSOR/SENDING UNIT · EQUIPMENT · POWER TRAIN.

Source record 10194415 at NHTSA
Sep 2, 2020Service Bulletin/Repair Instructions

20B22-S4

NHTSA communication ID: 10180371

NHTSA source summary · Original PDF not reviewed by Recallfolio

This customer satisfaction program updates the TCM software in affected vehicles to provide improved detection and over warning of electrical circuit failures in the TCM. As communicated in a previous Customer Satisfaction Program (14M02), electrical circuit failures within the TCM may develop and result in intermittent symptoms of loss of transmission engagement while driving, no-start, or a lack of power. Updating the TCM software will help ensure the vehicle operator is alerted to potential issues with the TCM prior to failure.

Source components: POWER TRAIN.

Source record 10180371 at NHTSA
May 29, 2020Service Bulletin/Repair Instructions

SSM 48858

NHTSA communication ID: 10176123

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2012-2020 Ford and Lincoln vehicles equipped with a TCU may exhibit an inoperative remote start with a 'Vehicle Failed To Start' message when using MyFord Mobile/Ford Pass/Lincoln Way mobile applications. The cellular cloud systems will only allow two remote start requests from the MyFord Mobile/Ford Pass/Lincoln Way apps without a vehicle drive event occurring. If a third remote start request is received, a Vehicle Failed To Start message will be displayed quickly in the mobile app. Once the vehicle is driven, the remote start counter is reset and will allow remote start commands to be sent from the mobile app. If the remote start system is not functioning using the key fob, refer to Workshop Manual (WSM) Section 303-06 for further diagnosis.

Source components: ELECTRICAL SYSTEM.

Source record 10176123 at NHTSA
Apr 24, 2020Service Bulletin/Repair Instructions

TSB 20-2140

NHTSA communication ID: 10174403

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2012-2016 Focus Electric vehicles built on 15-Sep-2011 and through 9-Dec-2015 may exhibit a Stop Safely Now message displayed in the instrument panel cluster (IPC) message center. This may be due to either an internal coolant leak on the upper or lower high voltage battery or corrosion on the lower high voltage battery connector caused by water ingress. If this occurs, the vehicle may not restart once it has been shut off. To resolve the condition, follow the Service Procedure to replace the upper and lower high voltage battery or apply corrosion protection.

Source components: ELECTRICAL SYSTEM.

Source record 10174403 at NHTSA
Mar 9, 2020Service Bulletin/Repair Instructions

SSM 48619

NHTSA communication ID: 10172972

NHTSA source summary · Original PDF not reviewed by Recallfolio

SSM 48619 - Various Vehicles - Perimeter Alarm Armed And Original Vehicle Keys Cannot Be Accessed to Enter Vehicle - CAN Protection Strategy Some 2013-2016 Model Year Vehicles may exhibit a concern in which the Perimeter Alarm is active and the original keys cannot be accessed to disable the perimeter alarm. This concern would most often occur when a customer loses keys and the dealership is attempting to program new keys to the vehicle. The Workshop Manual (WSM), Section 419-01A Perimeter Anti-Theft Alarm - System Operation and Component Description has been updated to inform of the Controller Area Network (CAN) Protection Strategy. Follow the procedure outlined to prevent replacement of the Body Control Module (BCM) on CAN Protection Strategy equipped vehicles when original keys are lost and perimeter alarm is active. Refer to the WSM for further detail on the CAN Protection Strategy. Lost keys and replacement of BCM for lost keys is non-warrantable.

Source components: ELECTRICAL SYSTEM · UNKNOWN OR OTHER.

Source record 10172972 at NHTSA
Jan 15, 2020Service Bulletin/Repair Instructions

TSB 20-2004

NHTSA communication ID: 10170911

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2012-2018 Focus Electric vehicles may exhibit a Stop Safely Now message displayed in the instrument panel cluster (IPC) message center. This may be due to either an internal coolant leak on the upper or lower high voltage battery or corrosion on the lower high voltage battery connector caused by water ingress. If this occurs, the vehicle may not restart once it has been shut off. To resolve the condition, follow the Service Procedure to replace the upper and lower high voltage battery or apply corrosive protection.

Source components: ELECTRICAL SYSTEM.

Source record 10170911 at NHTSA
Aug 26, 2019Service Bulletin/Repair Instructions

19N07-S1

NHTSA communication ID: 10164620

NHTSA source summary · Original PDF not reviewed by Recallfolio

Certain 2011 through 2015 Model Year Fiesta and 2012 through 2014 Model Year Focus Vehicles Equipped with a DPS6 Automatic Transmission - Transmission Control Module Service Warranty Coverage

Source components: POWER TRAIN.

Source record 10164620 at NHTSA
Aug 26, 2019Service Bulletin/Repair Instructions

14M02-S4

NHTSA communication ID: 10164606

NHTSA source summary · Original PDF not reviewed by Recallfolio

Certain 2011 through 2015 Model Year Fiesta and 2012 through 2016 Model Year Focus Vehicles Equipped with a DPS6 Automatic Transmission - Transmission Control Module Extended Warranty Coverage

Source components: POWER TRAIN.

Source record 10164606 at NHTSA
Aug 26, 2019Service Bulletin/Repair Instructions

14M01-S7

NHTSA communication ID: 10164604

NHTSA source summary · Original PDF not reviewed by Recallfolio

Certain 2011 through 2014 Model Year Fiesta and Focus Vehicles Equipped with a DPS6 Automatic Transmission - Transmission Clutch Shudder / Transmission Input Shaft Seal Warranty Extension

Source components: POWER TRAIN.

Source record 10164604 at NHTSA
Aug 14, 2019Service Bulletin/Repair Instructions

19N07

NHTSA communication ID: 10164615

NHTSA source summary · Original PDF not reviewed by Recallfolio

Certain 2011 through 2015 Model Year Fiesta and 2012 through 2014 Model Year Focus Vehicles Equipped with a DPS6 Automatic Transmission - Transmission Control Module Extended Warranty Coverage

Source components: POWER TRAIN.

Source record 10164615 at NHTSA
Aug 14, 2019Service Bulletin/Repair Instructions

15B22-S3

NHTSA communication ID: 10164612

NHTSA source summary · Original PDF not reviewed by Recallfolio

Certain 2011 through 2015 Model Year Fiesta and 2012 through 2014 Model Year Focus Vehicles Equipped with a DPS6 Automatic Transmission - Transmission Control Module Reprogramming for Overt TCM Failure Warning

Source components: POWER TRAIN.

Source record 10164612 at NHTSA
Aug 14, 2019Service Bulletin/Repair Instructions

19N08

NHTSA communication ID: 10164603

NHTSA source summary · Original PDF not reviewed by Recallfolio

Certain 2014 through 2015 Model Year Fiesta and 2014 through 2016 Model Year Focus Vehicles Equipped with a DPS6 Automatic Transmission - Transmission Clutch Shudder / Transmission Clutch Warranty Extension

Source components: POWER TRAIN.

Source record 10164603 at NHTSA
Aug 9, 2019Service Bulletin/Repair Instructions

SSM 48130

NHTSA communication ID: 10164508

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2010-2020 vehicles may exhibit distorted glass with a subtle orange peel pattern or streaking etched into the surface. This is caused by hydrofluoric acid which is used in some car wash solutions as a cleaning agent. Hydrofluoric acid can attack the glass and cause visual distortion and/or discoloration on the outer surface which cannot be removed by further cleaning. If this type of distortion is found, inspect the area of the glass that is covered by the cowl and/or molding. The portion of glass that is covered by the cowl or molding will not be affected by the acid. Hydrofluoric acid damage is not a defect in material or workmanship and is not a warrantable condition.

Source components: VISIBILITY · VISIBILITY:GLASS, SIDE/REAR.

Source record 10164508 at NHTSA
Aug 7, 2019Service Bulletin/Repair Instructions

SSM 48123

NHTSA communication ID: 10164497

NHTSA source summary · Original PDF not reviewed by Recallfolio

For Ford and Lincoln vehicles that require positive or negative battery terminal replacement, it is not necessary to replace the complete battery cable harness (14300 and 14301) for this concern. Positive battery cable clamp BT4Z-14450-AA and negative battery cable clamp BT4Z-14450-BA are available for this type of repair. Do not cut or shorten the battery cable, instead carefully remove the affected battery cable clamp and clean the cable end as necessary to preserve wire length. Some rework may be necessary for some vehicle environments. Bend the new positive battery cable clamp as needed and crimp it to the existing battery cable. Make sure to use heat shrink tubing over the battery cable to battery cable clamp connection. Obtain the heat shrink tube locally.

Source components: ELECTRICAL SYSTEM.

Source record 10164497 at NHTSA
Jul 12, 2019Service Bulletin/Repair Instructions

DPS6 Dealer Com.

NHTSA communication ID: 10163594

NHTSA source summary · Original PDF not reviewed by Recallfolio

Short-Term DPS6 Dealer Customer Handling Direction

Source components: POWER TRAIN.

Source record 10163594 at NHTSA
May 10, 2019Service Bulletin/Repair Instructions

SSM 47976

NHTSA communication ID: 10160931

NHTSA source summary · Original PDF not reviewed by Recallfolio

On vehicles equipped with an automatic transmission it is imperative that the converter pilot hub be greased with Motorcraft Multi-Purpose Grease Spray XL-5-A even if grease was not applied from the factory. Also verify that the engine/transmission alignment dowel pins are present as well as the engine crankshaft dowel pin, if equipped, when installing the transmission. Failure to adequately lubricate the converter hub greatly increases the likelihood of the flexplate cracking in the future. Missing dowels may cause a misalignment issue also resulting in a premature failure. Refer to Workshop Manual (WSM), Section 307-01.

Source components: POWER TRAIN.

Source record 10160931 at NHTSA
Apr 26, 2019Service Bulletin/Repair Instructions

SSM 47948

NHTSA communication ID: 10159494

NHTSA source summary · Original PDF not reviewed by Recallfolio

SSM 47948 - 2010-2019 Various Vehicles - Turbocharged Engines - Oil Supply Filter Replacement When Replacing The Turbocharger Or The Turbocharger Oil Supply Tube For 2010-2019 vehicles equipped with turbocharged engines, when diagnosing and/or replacing turbo related concerns, all steps within the Workshop Manual (WSM) procedure must be followed including replacement of all mandatory discarded parts. When specified in the WSM, the turbocharger oil supply filter must be replaced whenever the turbocharger or the turbocharger oil supply tube are replaced. Turbocharger bearing failure may occur if oil starvation occurs due to a restricted filter.

Source components: ENGINE.

Source record 10159494 at NHTSA
Apr 26, 2019Service Bulletin/Repair Instructions

SSM 47850

NHTSA communication ID: 10159489

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2013-2019 vehicles equipped with a EVDC air conditioning (A/C) compressor may exhibit poor A/C performance/improper climate function and/or a diagnostic trouble code (DTC) P06A0 in the powertrain control module (PCM). To support the proper diagnosis of this compressor, the EVDC control valve tester has been developed and is available from Rotunda (339-EVDC100). A tester has been provided to each U.S. dealership free of charge with shipments completed 19-Apr-2019 (reference EFC07013 on FMCDealer.com). This tester will help reduce the potential for misdiagnosis and unnecessary compressor replacement. Make sure that this tester is used for warranty repairs and document the test results in the Technician Comments field. Refer to the Rotunda catalog for a video and user manual which provide detailed operating instructions.

Source components: ELECTRICAL SYSTEM · EQUIPMENT:APPLIANCE:AIR CONDITIONER.

Source record 10159489 at NHTSA
Mar 18, 2019Service Bulletin/Repair Instructions

SSM 47875

NHTSA communication ID: 10156594

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2014-2019 Escape, 2014-2018 C-MAX, Focus, and Transit Connect vehicles not equipped with an auto start/stop system may exhibit an inability to program and/or no electrical power after installation of a service part body control module (BCM). Inspect the BCM for the presence of fuse F88. If fuse 88 is missing, install a 25 amp fuse and then re-evaluate the concern. If fuse 88 is installed in a vehicle with an auto start/stop system, the vehicle may exhibit concerns where the radio is turning off during an auto start/stop event and the instrument panel cluster (IPC) back lighting slowly goes dim during auto start/stop events.

Source components: ELECTRICAL SYSTEM.

Source record 10156594 at NHTSA
Jan 17, 2019Service Bulletin/Repair Instructions

SSM 47749

NHTSA communication ID: 10153969

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2012-2019 Vehicles may require repairs to the Smartlink system. Smartlink is a Ford Licensed Accessory which has a warranty provided by the accessory manufacturer. Warranty replacement parts for Smartlink that are ordered through Ford are not reimbursable through the Ford Motor Company warranty system. Please see the Warranty and Policy Manual for further information on Ford Licensed Accessories.

Source components: EQUIPMENT.

Source record 10153969 at NHTSA
Dec 12, 2018Service Bulletin/Repair Instructions

TSB 18-2373

NHTSA communication ID: 10153935

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2012-2018 Focus Electric, 2013-2017 C-Max Energi, and 2013-2019 Fusion Energi plug-in hybrid electric vehicles (PHEV) may exhibit the high voltage (HV) battery failing to charge while connected to the second Generation 120-volt electric vehicle service equipment (EVSE) charge cord. Follow the Service Procedure steps to correct the condition.

Source components: ELECTRICAL SYSTEM.

Source record 10153935 at NHTSA
Dec 10, 2018Service Bulletin/Repair Instructions

SSM 47703

NHTSA communication ID: 10153944

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2014-2019 Escape, 2014-2018 C-MAX,Focus, and Transit Connect vehicles may exhibit a concern of not able to program and/or no electrical power after installation of a service part Body Control Module(BCM). Inspect the BCM for the presence of fuse F88. If the fuse is missing, install the correct size replacement fuse as outlined in the Wiring Manual and then re-evaluate the concern.

Source components: ELECTRICAL SYSTEM · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10153944 at NHTSA
Nov 29, 2018Service Bulletin/Repair Instructions

TSB 18-2352

NHTSA communication ID: 10152459

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2012-2018 Focus BEV vehicles may exhibit a lack of A/C. This may be due to a high-voltage battery coolant cooler (chiller) leak that may have been caused by prior transmission service. Follow the Service Procedure steps to correct the condition.

Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.

Source record 10152459 at NHTSA
Nov 14, 2018Service Bulletin/Repair Instructions

SSM 47662

NHTSA communication ID: 10152473

NHTSA source summary · Original PDF not reviewed by Recallfolio

For 2010-2019 vehicles equipped with turbocharged engines, when diagnosing and/or replacing turbo related concerns, all steps within the Workshop Manual (WSM) procedure must be followed including replacement of all mandatory discarded parts. For all turbocharged engine applications, the turbocharger oil supply filter (6C683 gas engine/6L625 connector style or 6A968 diesel engine) must be replaced whenever the turbocharger or the turbocharger oil supply tube are replaced. Turbocharger bearing failure may occur if oil starvation occurs due to a restricted filter.

Source components: ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER.

Source record 10152473 at NHTSA
Oct 4, 2018Service Bulletin/Repair Instructions

SSM 47563

NHTSA communication ID: 10148720

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2011-2014 Fiesta and 2012-2014 Focus vehicles equipped with a DPS6 transmission may experience a fluid leak between the engine and transmission. Be aware that the engine oil and DPS6 transmission fluid are similar in color and texture. A transmission fluid leak at the input shaft seal can cause a buildup of fluid in the bell housing; creating the appearance of a rear main seal leak. The rear main seal should only be replaced after a rear main seal failure is confirmed through appropriate diagnostics outlined in the updated online Workshop Manual (WSM) Section 303-00 / Diagnosis and Testing with the use of Fluorescent dye (164-TP33200601).

Source components: ENGINE · EQUIPMENT · POWER TRAIN.

Source record 10148720 at NHTSA
Sep 19, 2018Service Bulletin/Repair Instructions

SSM 47528

NHTSA communication ID: 10149765

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2012-2018 Focus BEV vehicles may exhibit DTC U0130 in the battery electric control module (BECM) after replacement of the high voltage (HV) battery pack. In order to correct the condition, perform a programmable module installation (PMI) using the appropriate Ford scan tool. This action will initiate a coordinated flash of powertrain control module (PCM) and transmission control module (TCM) for HV battery compatibility. The use of a previous session may also cause DTC U1030 to be present in the BECM. For additional information refer to 2015 or newer Workshop Manual (WSM), Section 414-03A

Source components: ELECTRICAL SYSTEM.

Source record 10149765 at NHTSA
Aug 13, 2018Service Bulletin/Repair Instructions

SSM 47462

NHTSA communication ID: 10144937

NHTSA source summary · Original PDF not reviewed by Recallfolio

2015-2018 Edge, Fusion, Focus, MKZ, MKC, Escape vehicles equipped with a 2.0L EcoBoost engine may exhibit coolant consumption, white smoke and/or a runs rough condition. Refer to the extended coolant pressure test and checking for combustion gases in Workshop Manual (WSM), Section 303-03A. If internal coolant loss is confirmed, further investigation of the head gasket interface is required. Carefully inspect the cylinder block and head for erosion, pitting, and flatness defects, primarily between the cylinder to cylinder bore bridges. If defects to the aluminum surface on the cylinder block and/or cylinder head are found, follow the cost cap tool for component replacement. Follow WSM, Section 303-01A for the repair procedures

Source components: ENGINE AND ENGINE COOLING.

Source record 10144937 at NHTSA
Mar 30, 2018Service Bulletin/Repair Instructions

SSM 47201

NHTSA communication ID: 10137113

NHTSA source summary · Original PDF not reviewed by Recallfolio

Replacing the original equipment SYNC/Navigation system with either an aftermarket SYNC/Navigation kit or modifying original SYNC/Navigation parts to provide additional features is not recommended nor supported on any Ford, Mercury or Lincoln vehicle. Only approved Genuine Ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems. If you suspect a system has been modified, the following resources can be used to verify original equipment: Monroney Label (Window Sticker), Professional Technician Society (PTS) OASIS tab  select SYNC or HVBOM. For Genuine Ford accessories use: PTS Workshop Tab  select Dealer Installed Accessory or Accessory Installation.

Source components: EQUIPMENT.

Source record 10137113 at NHTSA
Mar 29, 2018Service Bulletin/Repair Instructions

SSM 47198

NHTSA communication ID: 10137110

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2013-2017 Fusion Energi, 2012-2017 Focus Electric and 2013-2017 C-MAX Energi vehicles equipped with a TCU built on or before 11-Oct-2017 may exhibit a discharged battery, inoperative remote features via MyFord Mobile app, incomplete user authorization and/or accessory protocol interface module (APIM) DTC U0198 with no modem electronic serial number (ESN) displayed. To correct this condition, perform any open TCU field service actions (FSAs). If U0198 DTC still remains, remove the TCU fuse for 5 minutes then reinstall. Reprogram the TCU using IDS or Ford J2534 Diagnostic Software (FJDS) release 108.05 or higher. An internet connection is required. Calibration files may also be obtained at www.motorcraftservice.com. For claiming, use causal part 14G229 and applicable labor operations in section 10 of the SLTS manual

Source components: ELECTRICAL SYSTEM.

Source record 10137110 at NHTSA
Mar 15, 2018Service Bulletin/Repair Instructions

SSM 47161

NHTSA communication ID: 10137097

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2012-2017 Focus BEV, 2013-2016 Fusion Energi And 2013-2017 CMAX Energi vehicles equipped with a Telematics Control Unit (TCU) may exhibit inoperative remote features via My Ford Mobile app, discharged battery, incomplete user authorization and/or diagnostic trouble code (DTC) U0198 with no modem electronic serial number (ESN) displayed. To correct this condition, perform any open TCU field service actions (FSAs). If DTC U0198 remains, remove the TCU fuse for 5 minutes then reinstall prior to programming. Perform IDS Network Test and reprogram the TCU using Integrated Diagnostic System (IDS) release 108.05 or higher. An internet connection is required. Calibration files may also be obtained at www.motorcraftservice.com. For claiming, use causal part 14G229 and applicable labor operations in section 10 of the SLTS manual.

Source components: ELECTRICAL SYSTEM.

Source record 10137097 at NHTSA
Mar 5, 2018Service Bulletin/Repair Instructions

SSM 47130

NHTSA communication ID: 10137085

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2012-2018 Focus Electric, 2013-2017 C-Max Energi, and 2013-2018 Fusion Energi plug-in hybrid electric vehicles (PHEV) may exhibit the high voltage (HV) battery failing to charge while connected to the Delphi 120 volt electric vehicle service equipment (EVSE) charge cord. To identify a Delphi EVSE the coupler on the EVSE that connects to the vehicle charge port is solid black. For information on the Delphi EVSE indicator status used for diagnostics, reference High Voltage Battery > Charging the High Voltage Battery in the Owners Guide for a 2018 Fusion Energi. Reference the Convenience Cord Light Emitting Diode (LED) Indicators chart. The Workshop Manual (WSM) is scheduled to be revised at a later date.

Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL.

Source record 10137085 at NHTSA
Feb 20, 2018Service Bulletin/Repair Instructions

TSB18-2062

NHTSA communication ID: 10136582

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2012-2014 Focus vehicles equipped with a 2.0L gasoline direct injection (GDI) engine may exhibit concerns of engine runs rough, crank no-start, loss of power, loss of engine RPM, and/or illuminated MIL with diagnostic trouble codes (DTCs) P0122, P0222, P0320, P0322, P0327, P0332, P0344, P0369, P06A7, P060D, P061C, P1336, P1674, P2111, P2112, P2127 and/or P2135. Follow the Service Procedure steps to correct the condition.

Source components: ELECTRICAL SYSTEM.

Source record 10136582 at NHTSA
Feb 14, 2018Service Bulletin/Repair Instructions

SSM 47080

NHTSA communication ID: 10136597

NHTSA source summary · Original PDF not reviewed by Recallfolio

2010-2018 various vehicles equipped with SYNC or SYNC 3 may not function when attempting to find or use the Spotify app via AppLink. As of an update released on 1/15/2018 Spotify will no longer be supporting their AppLink integration. No repair attempts should be attempted to correct this concern.

Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..

Source record 10136597 at NHTSA
Jan 17, 2018Service Bulletin/Repair Instructions

TSB18-2009

NHTSA communication ID: 10140286

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2013-2016 Focus Electric vehicles built on or after 22-Feb-2013 may exhibit an illuminated green ready to drive indicator in the instrument panel cluster (IPC) and the vehicle does not move. The condition may occur when the vehicle is restarted within 20 seconds after being powered off, starting the vehicle within 20 seconds of unplugging or starting the vehicle 15 minutes after being remotely started. Follow the Service Procedure steps to correct the condition.

Source components: ELECTRICAL SYSTEM.

Source record 10140286 at NHTSA
Jan 17, 2018Service Bulletin/Repair Instructions

TSB18-2009

NHTSA communication ID: 10138487

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2013-2016 Focus Electric vehicles built on or after 22-Feb-2013 may exhibit an illuminated green ready to drive indicator in the instrument panel cluster (IPC) and the vehicle does not move. The condition may occur when the vehicle is restarted within 20 seconds after being powered off, starting the vehicle within 20 seconds of unplugging or starting the vehicle 15 minutes after being remotely started. Follow the Service Procedure steps to correct the condition.

Source components: ELECTRICAL SYSTEM.

Source record 10138487 at NHTSA
Jan 10, 2018Service Bulletin/Repair Instructions

SSM 47009

NHTSA communication ID: 10140323

NHTSA source summary · Original PDF not reviewed by Recallfolio

The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.

Source components: EQUIPMENT · EQUIPMENT:ELECTRICAL.

Source record 10140323 at NHTSA
Jan 10, 2018Service Bulletin/Repair Instructions

SSM 47009

NHTSA communication ID: 10138524

NHTSA source summary · Original PDF not reviewed by Recallfolio

The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.

Source components: EQUIPMENT:ELECTRICAL.

Source record 10138524 at NHTSA
Nov 3, 2017Service Bulletin/Repair Instructions

17-2218

NHTSA communication ID: 10127394

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2013-2018 Escape, Focus and C-Max vehicles may exhibit a water stained headliner after the vehicle has experienced a water leak from areas such as the roof opening panel, fixed glass, roof rails and roof ditch mouldings. Follow the procedure below to remove the water stains from the headliner after the water leak has been repaired. Follow the Service Procedure steps to correct the condition.

Source components: STRUCTURE.

Source record 10127394 at NHTSA
Nov 2, 2017Service Bulletin/Repair Instructions

SSM 46900

NHTSA communication ID: 10127405

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some vehicles may exhibit a no start condition with an illuminated malfunction indicator lamp (MIL) and a DTC P161A after PCM replacement. This may be due to the parameter reset procedure not being properly completed. To clear this DTC, use the Ford Integrated Diagnostic System (IDS) service tool or Ford J2534 Diagnostic Software, select - Toolbox - Body - Security - PATS Functions - Parameter Reset. Follow the on-screen instructions to complete the procedure. This procedure will transfer the existing Key ID information between the modules without the need of having 2 programmed PATS keys present. There is no need to program keys when the PCM is going to be replaced. Additional information can be found in the Workshop Manual (WSM), Section 419-01. Missing or lost keys are not warrantable.

Source components: ELECTRICAL SYSTEM · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).

Source record 10127405 at NHTSA
Sep 13, 2017Service Bulletin/Repair Instructions

SSM 46814

NHTSA communication ID: 10119670

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2014-2017 Focus ST vehicles equipped with a 2.0L gasoline turbocharged direct injection (GTDI) engine may exhibit an audible engine idle ticking noise at normal operating temperature. This is considered a normal operating characteristic and no repair should be attempted.

Source components: ENGINE.

Source record 10119670 at NHTSA
Apr 26, 2017Service Bulletin/Repair Instructions

SSM 46545

NHTSA communication ID: 10109023

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2014-2017 Focus/C-MAX vehicles when a replacement BCM is received for a service repair may include a white Keyless Entry Card. In an effort to consolidate the complexity of BCM's only the highest level will be available for service. If the vehicle has the Keyless Entry buttons on the left door B-pillar the card needs to stay with the vehicle and shared with the customer as the keyless entry codes have changed. If the vehicle was not built with the b-pillar touch pad, discard the card, as it has no function, and cannot be added to the vehicle. If the vehicle has the stick-on wireless key pad, that keypad has it's own card, and again discard the one that came with the service BCM.

Source components: EQUIPMENT:ELECTRICAL.

Source record 10109023 at NHTSA
Apr 14, 2017Service Bulletin/Repair Instructions

SSM 46534

NHTSA communication ID: 10109018

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2013-2017 Fusion Hybrid Energi built on or before 24-Mar-2017, 2012-2016 Focus Electric and 2013-2016 C-MAX Energi and equipped with a TCU may exhibit inoperative remote features via MyFord Mobile app, discharged battery, incomplete user authorization and/or accessory protocol interface module (APIM) DTC U0198 with no modem electronic serial number (ESN) displayed. To correct, perform any open TCU field service actions (FSAs). If U0198 DTC remains, remove the TCU fuse for 5 minutes then reinstall prior to programming. Reprogram the TCU using Integrated Diagnostic System (IDS) release 104.05 or higher. An internet connection is required. Calibration files may also be obtained at www.motorcraftservice.com. For claiming, use causal part 14G229 and applicable labor operations in section 10 of the SLTS manual.

Source components: ELECTRICAL SYSTEM.

Source record 10109018 at NHTSA
Mar 2, 2017Service Bulletin/Repair Instructions

SSM 46421

NHTSA communication ID: 10099106

NHTSA source summary · Original PDF not reviewed by Recallfolio

2013-2017 FOCUS S MODEL VEHICLES DO NOT HAVE AN OUTSIDE AMBIENT TEMPERATURE DISPLAYED IN THE IPC AND THIS FEATURE CANNOT BE ADDED. THE SENSOR IS IN THE RIGHT HAND OUTSIDE MIRROR AND IS USED BY THE POWERTRAIN CONTROL MODULE (PCM) FOR CALCULATIONS.

Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).

Source record 10099106 at NHTSA
Feb 7, 2017Service Bulletin/Repair Instructions

14M02-S3

NHTSA communication ID: 10095866

NHTSA source summary · Original PDF not reviewed by Recallfolio

CERTAIN 2011 THROUGH 2015 MODEL YEAR FIESTA AND 2012 THROUGH 2016 MODEL YEAR FOCUS VEHICLES EQUIPPED WITH A DPS6 AUTOMATIC TRANSMISSION - TRANSMISSION CONTROL MODULE EXTENDED WARRANTY COVERAGE

Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.

Source record 10095866 at NHTSA
Feb 6, 2017Service Bulletin/Repair Instructions

SSM 46358

NHTSA communication ID: 10095628

NHTSA source summary · Original PDF not reviewed by Recallfolio

2011-2017 FIESTA AND 2012-2017 FOCUS SERVICE PIGTAIL FOR TRANSMISSION CONTROL MODULE CONNECTOR C1750A IS AVAILABLE. IF REPAIRS ARE NEEDED USE PART NUMBER FU2Z-14S411-VA. REPLACEMENT OF WIRING HARNESS 12A581 IS NO LONGER REQUIRED WHEN THIS CONNECTOR NEEDS SERVICING.

Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).

Source record 10095628 at NHTSA
Feb 2, 2017Service Bulletin/Repair Instructions

SSM 46355

NHTSA communication ID: 10095624

NHTSA source summary · Original PDF not reviewed by Recallfolio

MULTIPLE 2014-2016 VEHICLES EQUIPPED WITH 6F35 TRANSMISSION AND BUILT ON 1-JAN-2014 AND THROUGH 31-DEC-2015 MAY EXHIBIT HARSH REVERSE ENGAGEMENT AND HARSH/DELAYED 3RD AND 5TH GEAR UP/DOWN SHIFTS WITH NO DTCS PRESENT. THIS MAY BE DUE TO A MECHANICALLY BINDING SHIFT SOLENOID B (SSB). VERIFY HARSH REVERSE AND 3RD AND 5TH GEAR SHIFT EVENTS ARE PRESENT. USING IDS, IDENTIFY THE BAND NUMBER OF SSB FOR USE WHEN ORDERING PARTS. REMOVE THE MAIN CONTROL. DISASSEMBLE AND THOROUGHLY CLEAN THE VALVE BODY AND SOLENOID BODY TO REMOVE ANY CONTAMINANTS. REPLACE SSB, REFER TO WORKSHOP MANUAL (WSM) SECTION 307-01. USING IDS, CLEAR TRANSMISSION ADAPTIVE TABLES. FOR CLAIMING, USE CAUSAL PART 7G383 AND APPLICABLE LABOR OPERATIONS IN SECTION 7 OF THE SERVICE LABOR TIME STANDARDS (SLTS) MANUAL.

Source components: POWER TRAIN:MANUAL TRANSMISSION:SHIFT PATTERN INDICATOR.

Source record 10095624 at NHTSA
Jan 24, 2017Service Bulletin/Repair Instructions

SSM 46332

NHTSA communication ID: 10095184

NHTSA source summary · Original PDF not reviewed by Recallfolio

REPLACING THE ORIGINAL EQUIPMENT SYNC/NAVIGATION SYSTEM WITH EITHER AN AFTERMARKET SYNC/NAVIGATION KIT OR MODIFYING ORIGINAL SYNC/NAVIGATION PARTS TO PROVIDE ADDITIONAL FEATURES IS NOT RECOMMENDED NOR SUPPORTED ON ANY FORD, MERCURY OR LINCOLN VEHICLE. ONLY APPROVED GENUINE FORD ACCESSORIES OR ORIGINALLY INSTALLED SYSTEMS ARE SUPPORTED AND CERTIFIED TO FUNCTION CORRECTLY WITH OTHER VEHICLE SYSTEMS. IF YOU SUSPECT A SYSTEM HAS BEEN MODIFIED, THE FOLLOWING RESOURCES CAN BE USED TO VERIFY ORIGINAL EQUIPMENT: MONRONEY LABEL (WINDOW STICKER), PROFESSIONAL TECHNICIAN SOCIETY (PTS) OASIS TAB  SELECT SYNC OR HVBOM. FOR GENUINE FORD ACCESSORIES USE: PTS WORKSHOP TAB  SELECT DEALER INSTALLED ACCESSORY OR ACCESSORY INSTALLATION.

Source components: EQUIPMENT.

Source record 10095184 at NHTSA
Jan 13, 2017Service Bulletin/Repair Instructions

SSM 46303

NHTSA communication ID: 10095164

NHTSA source summary · Original PDF not reviewed by Recallfolio

THE 2012-2017 FOCUS WORKSHOP MANUAL (WSM) PROCEDURE FOR OIL PAN AND REAR MAIN OIL SEAL INSTALLATION HAS BEEN REVISED. REFER TO WSM, SECTION 303-01 REMOVAL AND INSTALLATION. THE SEALANT APPLICATION LOCATION HAS BEEN REVISED. SPECIAL ATTENTION SHOULD BE USED AT T-JOINT LOCATIONS FOR CLEANLINESS AND SEALANT APPLICATION.

Source components: ENGINE · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

Source record 10095164 at NHTSA
Jan 11, 2017Service Bulletin/Repair Instructions

SSM 46298

NHTSA communication ID: 10095163

NHTSA source summary · Original PDF not reviewed by Recallfolio

THE EV RANGE AFTER FULLY CHARGING A 2012-2016 FOCUS ELECTRIC, 2013-2016 C-MAX/FUSION ENERGI MAY VARY AFTER EACH CHARGING EVENT. THE WINDOW STICKER INDICATES 0-19 MILE RANGE FOR 2013-2016 CMAX/FUSION ENERGI. VARIATION OF EV RANGE MAY NOT INDICATE A BATTERY OR CHARGING CONCERN. EV RANGE IS SIMILAR TO THE DTE DISPLAY ON GASOLINE VEHICLES, EV RANGE WILL VARY WITH DRIVING/OPERATING CONDITIONS. CONDITIONS INCLUDE: EXTREME OUTSIDE TEMPERATURES, TERRAIN, DRIVING STYLE, CITY OR HIGHWAY DRIVING, TIRE PRESSURE, AND USE OF ACCESSORIES. IF THE CUSTOMER REPLACES THE LOW ROLL RESISTANCE TIRES WITH A MORE AGGRESSIVE TREAD THE RANGE WILL SUFFER. USING THE CABIN HEATER AND A/C, WHICH ARE ELECTRIC, WILL ALSO DECREASE EV RANGE. TO TEMPORARILY REMOVE THE IMPACT OF DRIVING/CLIMATE HISTORY, RESET THE LIFETIME SUMMARY OR DRIVING HISTORY BY USING THE SETTINGS MENU ON THE LEFT SIDE OF THE INSTRUMENT CLUSTER, UNDER DISPLAY

Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY.

Source record 10095163 at NHTSA
Jan 10, 2017Service Bulletin/Repair Instructions

SSM 46295

NHTSA communication ID: 10095154

NHTSA source summary · Original PDF not reviewed by Recallfolio

TO HELP DIFFERENTIATE ENGINE OIL LEAKS FROM OTHER POSSIBLE SOURCES, A NEW WHITE-COLORED FLUORESCENT ENGINE OIL DYE IS AVAILABLE. WORKSHOP MANUAL (WSM), SECTION 303-00 HAS BEEN REVISED TO REFERENCE THE NEW WHITE-COLORED DYE. THE NEW WHITE FLUORESCENT DYE PROVIDES A DISTINCT WHITE GLOW TO IDENTIFY ENGINE OIL LEAKS. THE NEW WHITE FLUORESCENT DYE REQUIRES A PURE UV DIAGNOSTIC INSPECTION LAMP. THE WHITE-COLORED FLUORESCENT DYE AND PURE UV LAMP ARE NOW IN THE ROTUNDA CATALOG. DYE AND LAMP PART NUMBERS. GASOLINE ONLY DYE: 1 OUNCE BOTTLE 164-TP-33200601. DIESEL ONLY DYE: 8 OUNCE BOTTLE: 164-TP-3320-0008. PURE UV DIAGNOSTIC INSPECTION LAMP 164-TP8695 OR 164-R3748.

Source components: ENGINE.

Source record 10095154 at NHTSA
Nov 17, 2016Service Bulletin/Repair Instructions

SSM 46210

NHTSA communication ID: 10095995

NHTSA source summary · Original PDF not reviewed by Recallfolio

SOME 2010-2016 EPAS EQUIPPED VEHICLES MAY EXHIBIT STEERING RELATED NOISES. THE WORKSHOP MANUAL (WSM) DIAGNOSTIC PROCEDURES HAVE BEEN UPDATED IN SECTION 211-02. WHEN DIAGNOSING AND REPAIRING EPAS STEERING NOISES USE THE UPDATED PROCEDURES.

Source components: STEERING.

Source record 10095995 at NHTSA
Nov 15, 2016Service Bulletin/Repair Instructions

SSM 46207

NHTSA communication ID: 10095994

NHTSA source summary · Original PDF not reviewed by Recallfolio

SOME 2013-2017 FOCUS 4-DOOR SEDANS HAVE A SINGLE DAMPENER ON THE LEFT HAND SIDE, ADJACENT TO THE LIFTING COIL SPRING, TO SLOW THE OPERATION OF THE LUGGAGE COMPARTMENT DECK LID WHEN OPENING AND CLOSING. THE LUGGAGE COMPARTMENT DECK LID IS HELD OPEN ONLY BY THE COIL SPRINGS CONNECTED TO THE HINGES. THE DAMPENER IS NOT CHARGED WITH GAS TO SUPPORT THE LUGGAGE COMPARTMENT LID LIKE THE 5 DOOR HATCHBACK LIFT CYLINDERS. REFER TO THE UPDATED WORKSHOP MANUAL SECTION 501-03 FOR ADDITIONAL INFORMATION. IT IS NORMAL FOR THE DAMPENER TO COMPRESS EASILY WHEN REMOVED FROM THE VEHICLE, UNLIKE THE HATCHBACK LIFT SUPPORT CYLINDERS.

Source components: STRUCTURE:BODY:DOOR.

Source record 10095994 at NHTSA
Nov 11, 2016Service Bulletin/Repair Instructions

SSM 46197

NHTSA communication ID: 10095991

NHTSA source summary · Original PDF not reviewed by Recallfolio

SOME 2013-2017 FOCUS/C-MAX VEHICLES EXHIBIT A FRAYED/CUT SHORT APPEARANCE AT THE FRONT EDGE OF THE HEADLINER NEAR THE WINDSHIELD. THIS IS A NORMAL CHARACTERISTIC OF THE HEADLINER AND NO REPAIRS SHOULD BE ATTEMPTED. ON 5 DOOR FOCUS(HATCHBACK) THE EXPOSED EDGE AT THE REAR LIFT GATE AREA MAY BE DUE THE HEM LIP OUT OF POSITION (BENT) PULLING THE WEATHER STRIP OUT OF POSITION, EXPOSING THE EDGE. THE HEM LIP CAN EASILY BE REPOSITIONED AND WILL KEEP THE HEADLINER EDGE COVERED BY THE WEATHER-STRIP, WITHOUT HEADLINER REPLACEMENT.

Source components: STRUCTURE:BODY:HATCHBACK/LIFTGATE:SUPPORT DEVICE/STRUT.

Source record 10095991 at NHTSA
Oct 17, 2016Service Bulletin/Repair Instructions

SSM 46132

NHTSA communication ID: 10091151

NHTSA source summary · Original PDF not reviewed by Recallfolio

SOME 2008-2017 FORD/MERCURY/LINCOLN VEHICLES EQUIPPED WITH SYNC MAY GENERATE A VHR THAT IDENTIFIES A CONCERN WITH THE BRAKES AND SUSPENSION CATEGORY INDICATING SERVICE IS REQUIRED DUE TO A BRAKE SYSTEM WARNING LAMP BEING ILLUMINATED. IF THE PARK BRAKE WAS APPLIED WHEN THE VHR WAS GATHERING DATA FROM THE MAJOR VEHICLE SYSTEMS, THE BRAKES AND SUSPENSION MESSAGE WILL BE REPORTED AS THE VHR LOOKS FOR ANY WARNING LAMPS ILLUMINATED IN THE INSTRUMENT CLUSTER. RERUN THE VHR WITH THE ENGINE ON AND VEHICLE IN PARK, AND ENSURE THE PARK BRAKE IS DISENGAGED. IF THE SYNC VHR IS STILL REPORTING A CONCERN TO THE CUSTOMERS SYNC OWNERS ACCOUNT, REFER TO THE APPROPRIATE WORKSHOP MANUAL SECTION FOR DIAGNOSIS BY DTC OR SYMPTOM. STARTING IN 2015 NOT ALL SYNC EQUIPPED VEHICLES SUPPORT VHR, REFER TO THE OWNERS MANUAL FOR VHR OPERATION.

Source components: SERVICE BRAKES.

Source record 10091151 at NHTSA
Oct 17, 2016Service Bulletin/Repair Instructions

SSM 46132

NHTSA communication ID: 10090681

NHTSA source summary · Original PDF not reviewed by Recallfolio

SOME 2008-2017 FORD/MERCURY/LINCOLN VEHICLES EQUIPPED WITH SYNC MAY GENERATE A VHR THAT IDENTIFIES A CONCERN WITH THE BRAKES AND SUSPENSION CATEGORY INDICATING SERVICE IS REQUIRED DUE TO A BRAKE SYSTEM WARNING LAMP BEING ILLUMINATED. IF THE PARK BRAKE WAS APPLIED WHEN THE VHR WAS GATHERING DATA FROM THE MAJOR VEHICLE SYSTEMS, THE BRAKES AND SUSPENSION MESSAGE WILL BE REPORTED AS THE VHR LOOKS FOR ANY WARNING LAMPS ILLUMINATED IN THE INSTRUMENT CLUSTER. RERUN THE VHR WITH THE ENGINE ON AND VEHICLE IN PARK, AND ENSURE THE PARK BRAKE IS DISENGAGED. IF THE SYNC VHR IS STILL REPORTING A CONCERN TO THE CUSTOMERS SYNC OWNERS ACCOUNT, REFER TO THE APPROPRIATE WORKSHOP MANUAL SECTION FOR DIAGNOSIS BY DTC OR SYMPTOM. STARTING IN 2015 NOT ALL SYNC EQUIPPED VEHICLES SUPPORT VHR, REFER TO THE OWNERS MANUAL FOR VHR OPERATION.

Source components: SERVICE BRAKES.

Source record 10090681 at NHTSA
Sep 30, 2016Service Bulletin/Repair Instructions

SSM 46102

NHTSA communication ID: 10109079

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some vehicles may have a concern where the safety belt retractor webbing does not extract from the stowed position or exhibits excessive pressure on the occupant during use. This may be due to a normal condition which happens when the seatbelt retracts at a high rate of speed. The Workshop Manual, Section 501-20A General Procedures has been updated with a locked seatbelt retractor releasing procedure.

Source components: SEAT BELTS · SEAT BELTS:FRONT:RETRACTOR.

Source record 10109079 at NHTSA
Sep 26, 2016Service Bulletin/Repair Instructions

TSB 16-0129

NHTSA communication ID: 10109047

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2011-2016 Fiesta and 2012-2016 Focus vehicles equipped with a DPS6 transmission may exhibit intermittent concerns of loss of transmission engagement while driving, intermittent no start or a loss of power. These symptoms are usually accompanied by an illuminated Check Engine lamp. Additional symptoms may include messages in the message center indicating hill start assist is not available, that parking aid malfunction/service is required or the transmission PRNDL/S gear selector on the instrument cluster may flash. Diagnostic trouble codes (DTCs) U0100, U0101, U1013 and/or P0606 will be present or stored in the powertrain control module (PCM) memory. Follow the Service Procedure steps to correct the condition.

Source components: POWER TRAIN · POWER TRAIN:AUTOMATIC TRANSMISSION.

Source record 10109047 at NHTSA
Sep 21, 2016Service Bulletin/Repair Instructions

SSM 46085

NHTSA communication ID: 10109070

NHTSA source summary · Original PDF not reviewed by Recallfolio

The Powertrain Control/Emissions Diagnosis (PC/ED) manual has been revised for diagnosing electronic throttle bodies (ETBs). The ETC_ACT and ETC_DSD PIDs should not used to diagnose possible ETB concerns. The IDS has a limited refresh rate when reading these PIDs and cannot display quickly enough to validate a concern. The PCM automatically monitors these inputs more accurately and will set diagnostic trouble codes (DTCs) when appropriate. Using these PIDs for diagnostics will lead to inaccurate results and improper ETB replacements. If a concern is intermittent and no DTCs are present, refer to historical DTCs and the PC/ED, Section 3 No DTCs Present Index chart for further information.

Source components: ENGINE · ENGINE AND ENGINE COOLING · ENGINE AND ENGINE COOLING:COOLING SYSTEM · ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN · ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS · ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY · ENGINE AND ENGINE COOLING:ENGINE · ENGINE AND ENGINE COOLING:ENGINE:DIESEL · ENGINE AND ENGINE COOLING:ENGINE:GASOLINE · ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:BELTS AND ASSOCIATED PULLEYS · ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER · ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV) · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE) · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE.

Source record 10109070 at NHTSA
Sep 1, 2016Service Bulletin/Repair Instructions

16-0031

NHTSA communication ID: 10075261

NHTSA source summary · Original PDF not reviewed by Recallfolio

ISSUE Some 2013-2014 Focus ST, Fusion, Escape and MKZ vehicles equipped with a 2.0L gasoline turbocharged direct injection (GTDI) engine and built on 9/1/2012 and through 8/1/2013 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P2096 (post catalyst fuel trim system too lean bank 1) stored in powertrain control module (PCM) memory. This may be due to engine oil migrating from the variable valve timing (VVT) oil control solenoids through the engine wire harness to the catalyst monitor sensor (CMS).

Source components: ELECTRICAL SYSTEM · ENGINE.

Source record 10075261 at NHTSA
Aug 19, 2016Service Bulletin/Repair Instructions

SSM 46013

NHTSA communication ID: 10092557

NHTSA source summary · Original PDF not reviewed by Recallfolio

SOME 2014-2015 FOCUS AND FIESTA VEHICLES EQUIPPED WITH A 1.0L GTDI BUILT ON OR BEFORE 07/25/2015 MAY EXHIBIT LACK OF POWER AND MULTIPLE MISS FIRE DIAGNOSTIC TROUBLE CODES (DTC). IF NORMAL ENGINE DIAGNOSIS LEADS TO LOW COMPRESSION AND PISTON DAMAGE, INSPECT THE EXHAUST VALVES FOR A PIN HOLE IN THE CENTER OF THE VALVE HEAD.

Source components: ENGINE.

Source record 10092557 at NHTSA
Aug 16, 2016Service Bulletin/Repair Instructions

15B22-S2

NHTSA communication ID: 10092576

NHTSA source summary · Original PDF not reviewed by Recallfolio

CERTAIN 2011 THROUGH 2015 MODEL YEAR FIESTA AND 2012 THROUGH 2014 MODEL YEAR FOCUS VEHICLES EQUIPPED WITH A DPS6 AUTOMATIC TRANSMISSION - TRANSMISSION CONTROL MODULE REPROGRAMMING FOR OVERT TCM FAILURE WARNING.

Source components: POWER TRAIN.

Source record 10092576 at NHTSA
Aug 16, 2016Service Bulletin/Repair Instructions

14M01-S6

NHTSA communication ID: 10092575

NHTSA source summary · Original PDF not reviewed by Recallfolio

CERTAIN 2011 THROUGH 2014 MODEL YEAR FIESTA AND FOCUS VEHICLES EQUIPPED WITH A DPS6 AUTOMATIC TRANSMISSION - TRANSMISSION CLUTCH SHUDDER / TRANSMISSION INPUT SHAFT SEAL WARRANTY EXTENSION.

Source components: POWER TRAIN.

Source record 10092575 at NHTSA
Aug 16, 2016Service Bulletin/Repair Instructions

TSB16-0109

NHTSA communication ID: 10092372

NHTSA source summary · Original PDF not reviewed by Recallfolio

SOME 2011-2015 FIESTA VEHICLES BUILT ON OR BEFORE 10/15/2014 AND 2012-2016 FOCUS VEHICLES EQUIPPED WITH A DPS6 AUTOMATIC TRANSMISSION MAY EXHIBIT EXCESSIVE TRANSMISSION CLUTCH SHUDDER ON LIGHT ACCELERATION. SOME VEHICLES MAY OR MAY NOT EXHIBIT TRANSMISSION FLUID LEAKING FROM THE CLUTCH HOUSING. FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.

Source components: POWER TRAIN.

Source record 10092372 at NHTSA
Jul 27, 2016Service Bulletin/Repair Instructions

TSB16-0101

NHTSA communication ID: 10091223

NHTSA source summary · Original PDF not reviewed by Recallfolio

SOME 2013-2014 FOCUS ST, FUSION, ESCAPE AND VEHICLES EQUIPPED WITH A 2.0L GASOLINE TURBOCHARGED DIRECT INJECTION (GTDI) ENGINE AND BUILT ON 9/1/2012 AND THROUGH 8/1/2013 MAY EXHIBIT AN ILLUMINATED MALFUNCTION INDICATOR LAMP (MIL) WITH DIAGNOSTIC TROUBLE CODE (DTC) P2096 (POST CATALYST FUEL TRIM SYSTEM TOO LEAN BANK 1) STORED IN POWERTRAIN CONTROL MODULE (PCM) MEMORY. THIS MAY BE DUE TO ENGINE OIL MIGRATING FROM THE VARIABLE VALVE TIMING (VVT) OIL CONTROL SOLENOIDS THROUGH THE ENGINE WIRE HARNESS TO THE CATALYST MONITOR SENSOR (CMS). FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.

Source components: ELECTRICAL SYSTEM · ENGINE.

Source record 10091223 at NHTSA
Jul 19, 2016Service Bulletin/Repair Instructions

SSM 45941

NHTSA communication ID: 10091429

NHTSA source summary · Original PDF not reviewed by Recallfolio

2011-2016 FIESTA AND 2012-2016 FOCUS WITH DPS6 TRANSMISSION HAVE A NEW CLUTCH AVAILABLE. THIS CHANGE AFFECTS TCM/PCM CALIBRATIONS. 2011-2013 FIESTA CALIBRATIONS HAVE NOT YET BEEN RELEASED, CONTINUE TO SERVICE WITH BV6Z-7B546-F CLUTCH, PERFORM ANY REPROGRAMMING WITH IDS RELEASE 101.01 ONLY. 2014-2016 FIESTA VEHICLES CONTINUE TO USE FA6Z-7B546-A CLUTCH AND ARE NOT AFFECTED BY CALIBRATION. 2012-2016 FOCUS CAN USE CLUTCH F1FZ-7B546-B FOLLOWING TSB 15-0120 AND FSA 14M01 AND CALIBRATIONS RELEASED WITH IDS 101.02. WORKSHOP MANUALS HAVE BEEN UPDATED TO INCLUDE A REPAIR VALIDATION CODE (RVC) IN DIAGNOSIS BY SYMPTOM, PINPOINT TEST A (FOCUS, 2014-15 FIESTA), PINPOINT TEST N (2011-2013 FIESTA). RVC CODE IS NOT REQUIRED ON WARRANTY CLAIMS AT THIS TIME. ALL PUBLICATIONS WILL UPDATE SOON, WHEN 2011-2013 FIESTA CALIBRATION IS RELEASED.

Source components: POWER TRAIN.

Source record 10091429 at NHTSA
Jul 11, 2016Service Bulletin/Repair Instructions

SSM 45923

NHTSA communication ID: 10091270

NHTSA source summary · Original PDF not reviewed by Recallfolio

2013-2016 FOCUS S MODEL VEHICLES DO NOT HAVE AN OUTSIDE AMBIENT TEMPERATURE DISPLAYED IN THE IPC AND THIS FEATURE CANNOT BE ADDED. THE SENSOR IS IN THE RIGHT HAND OUTSIDE MIRROR AND IS USED BY THE POWERTRAIN CONTROL MODULE (PCM) FOR CALCULATIONS.

Source components: ELECTRICAL SYSTEM.

Source record 10091270 at NHTSA
Jun 24, 2016Service Bulletin/Repair Instructions

SSM 45898

NHTSA communication ID: 10091149

NHTSA source summary · Original PDF not reviewed by Recallfolio

2012-2016 FOCUS SEDAN LUGGAGE COMPARTMENT LID WON'T STAY UP

Source components: EQUIPMENT.

Source record 10091149 at NHTSA
Jun 14, 2016Service Bulletin/Repair Instructions

14M02-S2

NHTSA communication ID: 10091154

NHTSA source summary · Original PDF not reviewed by Recallfolio

CERTAIN 2011 THROUGH 2015 MODEL YEAR FIESTA AND 2012 THROUGH 2015 MODEL YEAR FOCUS VEHICLES EQUIPPED WITH A DPS6 AUTOMATIC TRANSMISSION - TRANSMISSION CONTROL MODULE EXTENDED WARRANTY COVERAGE

Source components: EQUIPMENT · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).

Source record 10091154 at NHTSA
Jun 14, 2016Service Bulletin/Repair Instructions

15B22-S1

NHTSA communication ID: 10091153

NHTSA source summary · Original PDF not reviewed by Recallfolio

CERTAIN 2011 THROUGH 2015 MODEL YEAR FIESTA AND 2012 THROUGH 2014 MODEL YEAR FOCUS VEHICLES EQUIPPED WITH A DPS6 AUTOMATIC TRANSMISSION - TRANSMISSION CONTROL MODULE REPROGRAMMING FOR OVERT TCM FAILURE WARNING

Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).

Source record 10091153 at NHTSA
May 13, 2016Service Bulletin/Repair Instructions

SSM-45821

NHTSA communication ID: 10078990

NHTSA source summary · Original PDF not reviewed by Recallfolio

SIRI EYES FREE FUNCTIONAL ISSUES USING BLUETOOTH AND APPLE IOS 9.2 AND 9.2.1

Source components: ELECTRICAL SYSTEM:SOFTWARE.

Source record 10078990 at NHTSA
May 11, 2016Service Bulletin/Repair Instructions

SSM-45815

NHTSA communication ID: 10078988

NHTSA source summary · Original PDF not reviewed by Recallfolio

AIR CONDITIONING (A/C) INOPERATIVE - DIAGNOSTIC TROUBLE CODE (DTC) P0645

Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).

Source record 10078988 at NHTSA
Apr 14, 2016Service Bulletin/Repair Instructions

16-0062

NHTSA communication ID: 10183763

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2012-2015 Focus vehicles may exhibit inaccurate fuel gauge indication and/or inaccurate distance to empty. The vehicle may also exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0420, P1450, P0443, P0452, P0456, P0460 and/or P2196.

Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL.

Source record 10183763 at NHTSA
Apr 7, 2016Service Bulletin/Repair Instructions

16B02M

NHTSA communication ID: 10204985

NHTSA source summary · Original PDF not reviewed by Recallfolio

49 CFR Part 579.5 Monthly Communications - March 2016

Source components: ELECTRICAL SYSTEM · POWER TRAIN.

Source record 10204985 at NHTSA
Mar 17, 2016Service Bulletin/Repair Instructions

TSB160045

NHTSA communication ID: 10205010

NHTSA source summary · Original PDF not reviewed by Recallfolio

2.0L Ecoboost - Fuel odor

Source components: ENGINE · FUEL SYSTEM, GASOLINE.

Source record 10205010 at NHTSA
Mar 17, 2016Service Bulletin/Repair Instructions

16-0045

NHTSA communication ID: 10075275

NHTSA source summary · Original PDF not reviewed by Recallfolio

2.0L ECOBOOST - FUEL ODOR ISSUE Some 2013-2016 Escape, 2015-2016 MKC vehicles built on or before 12/15/2015, 2013-2016 Fusion, MKZ, 2013-2015 Explorer, 2013-2014 Focus ST and Edge vehicles equipped with 2.0L EcoBoost engines may exhibit fuel odor originating from the positive crankcase ventilation (PCV) hose. SERVICE PROCEDURE 1. Is the vehicle a 2016 Escape or MKC? a. Yes - check the vehicle build date. Was the vehicle built on or before 12/15/2015? (1) Yes - proceed to Step 2. (2) No - this article does not apply. b. No - proceed to Step 2. 2. Inspect the PCV hose to make sure it is properly connected to the valve cover and the low pressure intake duct. a. For Escape and Focus ST vehicles remove the cowl panel grille to access the hose. Refer to Workshop Manual (WSM), Section 501-02. b. For Edge vehicles remove the air cleaner outlet pipe to access the hose. Refer to WSM, Section 303-12. 3. Does the PCV hose exhibit a fuel smell or was the hose disconnected? a. Yes - replace hose and reassemble the vehicle. b. No - Refer to WSM, Section 303-13 for normal diagnosis.

Source components: FUEL/PROPULSION SYSTEM.

Source record 10075275 at NHTSA
Mar 16, 2016Service Bulletin/Repair Instructions

TSB160044

NHTSA communication ID: 10205009

NHTSA source summary · Original PDF not reviewed by Recallfolio

DPS6 - no satart and/or transmission engagement or loss of power with DTCS u0100, U00101, U1013, U3003 AND/OR P0606

Source components: POWER TRAIN.

Source record 10205009 at NHTSA
Mar 16, 2016Service Bulletin/Repair Instructions

16-0044

NHTSA communication ID: 10075274

NHTSA source summary · Original PDF not reviewed by Recallfolio

DPS6 - NO START AND/OR TRANSMISSION ENGAGEMENT OR LOSS OF POWER WITH DTCS U0100, U0101, U1013, U3003 AND/OR P0606 ISSUE Some 2011-2016 Fiesta and 2012-2016 Focus vehicles equipped with a DPS6 transmission may exhibit intermittent concerns of loss of transmission engagement while driving, intermittent no start or a loss of power. These symptoms are usually accompanied by an illuminated Check Engine lamp. Additional symptoms may include messages in the message center indicating hill start assist is not available, that parking aid malfunction/service is required or the transmission PRNDL/S gear selector on the instrument cluster may flash. Diagnostic trouble codes (DTCs) U0100, U0101, U1013, U3003 and/or P0606 will be present or stored in the powertrain control module (PCM) memory.

Source components: POWER TRAIN · POWER TRAIN:AUTOMATIC TRANSMISSION.

Source record 10075274 at NHTSA
Mar 3, 2016Service Bulletin/Repair Instructions

14M01

NHTSA communication ID: 10074653

NHTSA source summary · Original PDF not reviewed by Recallfolio

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.

Source record 10074653 at NHTSA
Feb 5, 2016Service Bulletin/Repair Instructions

TSB160001

NHTSA communication ID: 10204987

NHTSA source summary · Original PDF not reviewed by Recallfolio

49 CFR Part 579.5 Monthly Communications - March 2016 Air bag warning light illuminated with diagnostic trouble code (DTC) B141B and/or B141C

Source components: AIR BAGS · ENGINE · EQUIPMENT · FUEL/PROPULSION SYSTEM · POWER TRAIN · STRUCTURE.

Source record 10204987 at NHTSA
Feb 5, 2016Service Bulletin/Repair Instructions

LTR3756

NHTSA communication ID: 10204986

NHTSA source summary · Original PDF not reviewed by Recallfolio

49 CFR Part 579.5 Monthly Communications - January 2016

Source components: AIR BAGS · ELECTRICAL SYSTEM · ENGINE · FUEL/PROPULSION SYSTEM · POWER TRAIN · STRUCTURE.

Source record 10204986 at NHTSA
Oct 25, 2015Service Bulletin/Repair Instructions

TSB 16-0147

NHTSA communication ID: 10090512

NHTSA source summary · Original PDF not reviewed by Recallfolio

SOME 2013-2016 FOCUS ELECTRIC VEHICLES BUILT ON OR AFTER 22-FEB-2013 MAY EXHIBIT AN ILLUMINATED GREEN READY TO DRIVE INDICATOR IN THE INSTRUMENT PANEL CLUSTER (IPC) AND THE VEHICLE DOES NOT MOVE. FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.

Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL.

Source record 10090512 at NHTSA
Sep 25, 2015Service Bulletin/Repair Instructions

TSB-14-0131

NHTSA communication ID: 10056925

NHTSA source summary · Original PDF not reviewed by Recallfolio

FORD: ON SOME VEHICLES, WITH LIGHT ACCELERATION, TRANSMISSION CLUTCH WOULD SHUDDER, EXCESSIVELY, AND POSSIBLY WOULD LEAK TRANSMISSION FLUID FROM CLUTCH HOUSING. MODEL 2011-14 FIESTA, FOCUS. *PE UPDATED 9/25/2015 *CN

Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.

Source record 10056925 at NHTSA
Aug 25, 2015Service Bulletin/Repair Instructions

TSB-15-0134

NHTSA communication ID: 10074712

NHTSA source summary · Original PDF not reviewed by Recallfolio

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY.

Source record 10074712 at NHTSA
Aug 4, 2015Service Bulletin/Repair Instructions

CSP-15B-22

NHTSA communication ID: 10074720

NHTSA source summary · Original PDF not reviewed by Recallfolio

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Source components: ELECTRICAL SYSTEM:SOFTWARE · POWER TRAIN:AUTOMATIC TRANSMISSION.

Source record 10074720 at NHTSA
Aug 4, 2015Service Bulletin/Repair Instructions

TSB-15-0121

NHTSA communication ID: 10074708

NHTSA source summary · Original PDF not reviewed by Recallfolio

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Source components: ELECTRICAL SYSTEM:SOFTWARE · POWER TRAIN:AUTOMATIC TRANSMISSION.

Source record 10074708 at NHTSA
Aug 4, 2015Service Bulletin/Repair Instructions

TSB-15-0120

NHTSA communication ID: 10074707

NHTSA source summary · Original PDF not reviewed by Recallfolio

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.

Source record 10074707 at NHTSA
Aug 4, 2015Service Bulletin/Repair Instructions

SB-14M02-SUP2

NHTSA communication ID: 10072057

NHTSA source summary · Original PDF not reviewed by Recallfolio

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).

Source record 10072057 at NHTSA