The manufacturer’s record · Page 1 of 4
Original record summaries, dates and identifiers for this model-year. Records 1–100 of 325, ordered newest first. Dated records on this page: May 28, 2021–Aug 26, 2026.
Back to 2017 Ford F-350 SD problems & recallsThis archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
NHTSA communication ID: 11036559
NHTSA source summary · Original PDF not reviewed by Recallfolio
NEW VEHICLE DELIVERY HOLD Emissions Recall 26E02 Certain 2016-2019 F-650 - 750 and 2017-2019 F-350 - 550 Vehicles Equipped With 6.7L Diesel Engines Crankcase Ventilation (CCV) Inspection And Replacement
Campaign / software reference: 26E02
Source components: ENGINE · UNKNOWN OR OTHER.
Source record 11036559 at NHTSANHTSA communication ID: 11036547
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customer Satisfaction Program 26N03 Certain 2017-2019 Model Year Super Duty Vehicles w/ 6.7L Diesel Engines Diesel Particulate Filter Replacement, If Required After Dealer Evaluation
Campaign / software reference: 26N03
Source components: ENGINE · UNKNOWN OR OTHER.
Source record 11036547 at NHTSANHTSA communication ID: 11031781
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customer Satisfaction Program 25N15 - Supplement #1 Certain 2015-2019 Model Year Multiple Vehicle Lines Rear View Camera Inspection For One-Time Replacement
Source components: ELECTRICAL SYSTEM · UNKNOWN OR OTHER.
Source record 11031781 at NHTSANHTSA communication ID: 11030282
NHTSA source summary · Original PDF not reviewed by Recallfolio
Advance Notice – Customer Satisfaction Program 25N17 Certain 2015-2025 Model Year Multiple Vehicle Lines Rear View Camera Replacement If Required After Dealer Evaluation
Source components: BACK OVER PREVENTION: REARVIEW SYSTEM BRAKING · BACK OVER PREVENTION: WARNINGS · LANE DEPARTURE: BLIND SPOT DETECTION · UNKNOWN OR OTHER.
Source record 11030282 at NHTSANHTSA communication ID: 11029052
NHTSA source summary · Original PDF not reviewed by Recallfolio
Ford and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory wireless keyless entry keypad systems may or may not come with a wallet card containing the master code. Unlike the integrated wired keypad, the accessory wireless keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool or from the label printed on the body control module (BCM). The Factory Keyless Entry Code application within the diagnostic scan tool will not provide an applicable master code for the accessory wireless keypad. If the wallet card for an accessory keypad is not available, the "Wireless RF Keypad Diagnosis Guide" can be referenced and provides direction on how to retrieve the master code. This guide is located under the Workshop Manual tab > Accessories > Installation > Wireless RF Keypad Diagnosis Guide > PPT C > Step C2.<br /><br /> Note: The only available keypad for some vehicles from the assembly plant is the accessory wireless keyless entry keypad. The integrated wired keypad cannot be installed on vehicles not equipped from the factory with a wired keyless entry k
Source components: ELECTRICAL SYSTEM · STRUCTURE:BODY · UNKNOWN OR OTHER.
Source record 11029052 at NHTSANHTSA communication ID: 11027801
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2015-2019 Model Year Multiple Vehicle Lines Rear View Camera Inspection For One-Time Replacemen
Source components: VISIBILITY/WIPER.
Source record 11027801 at NHTSANHTSA communication ID: 11026915
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2015-2019 Model Year Multiple Vehicle Lines Rear View Camera Inspection For One-Time Replacement
Source components: UNKNOWN OR OTHER · VISIBILITY/WIPER.
Source record 11026915 at NHTSANHTSA communication ID: 11027144
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2026 F-Super Duty vehicles may exhibit a pull/drift condition during braking. This may be due to the brake pads needing to be broken in. Repeated, heavy brake applications may assist to resolve the pull/drift condition. The Workshop Manual, Section 206-00 Symptom Chart for vehicle pulls or drifts during braking has been updated to reflect this information.
Source components: SERVICE BRAKES.
Source record 11027144 at NHTSANHTSA communication ID: 11026928
NHTSA source summary · Original PDF not reviewed by Recallfolio
Special Field Action 25L02 Certain 2017-2024 Model Year California Emissions-Certified Vehicles Transmission Control Assembly Reimbursement
Source components: UNKNOWN OR OTHER.
Source record 11026928 at NHTSANHTSA communication ID: 11025837
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 24-2165 to update the TSB Service Procedure. Some vehicles listed in the Model statement above may exhibit various SYNC performance related concerns including but not limited to: Display operation concerns Navigation inoperative Voice recognition concerns Phone connection issues Dropped phone connections Applink related performance Travel Link not present or showing incorrect traffic Slow system response NOTE: Ford has found some of the APIMs replaced and returned for inspection contained an outdated software level and the APIM did not require replacement. The customer concern may have been resolved by updating the APIM with latest level of software. The SYNC 3 universal thumb drive will be able to update the APIM software without the use of a scan tool and does not require the process to be monitored. Ford will be monitoring APIM replacements to confirm TSB directed software updates have been performed.
Source components: ELECTRICAL SYSTEM.
Source record 11025837 at NHTSANHTSA communication ID: 11023851
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2017 and 2020-2022 Model Year Super Duty Vehicles Equipped with 6.7L Engine - Emission Control Information Label Update
Source components: ENGINE · UNKNOWN OR OTHER.
Source record 11023851 at NHTSANHTSA communication ID: 11022355
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2011-2022 Model Year Super Duty Vehicles Equipped with 6.7L Engine - Emission Control Information Label Update for Qualified Vehicles
Source components: ENGINE · UNKNOWN OR OTHER.
Source record 11022355 at NHTSANHTSA communication ID: 11022379
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2017 and 2020-2022 Model Year Super Duty Vehicles Equipped with 6.7L Engine - Emission Control Information Label Update
Source components: ENGINE · UNKNOWN OR OTHER.
Source record 11022379 at NHTSANHTSA communication ID: 11011941
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2025 F-Super Duty vehicles may exhibit a pull/drift condition during braking.
Source components: UNKNOWN OR OTHER.
Source record 11011941 at NHTSANHTSA communication ID: 11008948
NHTSA source summary · Original PDF not reviewed by Recallfolio
While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions. While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions.
Source components: UNKNOWN OR OTHER.
Source record 11008948 at NHTSANHTSA communication ID: 11006476
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2020 F-150 and 2017-2019 F-Super Duty vehicles may not successfully complete the Transmission Characterization/Solenoid IDN procedure using the Integrated Diagnostic System (IDS) scan tool. This may be due to the IDS not being at the latest software level
Source components: UNKNOWN OR OTHER.
Source record 11006476 at NHTSANHTSA communication ID: 11001174
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 21-2175 to update the TSB Service Procedure. Some 2016 MKS, 2016-2017 Navigator, 2016-2018 F-150/Focus/C-MAX/Edge/Fiesta/MKX/Transit Connect/Mustang, 2017-2018 Continental/Fusion/MKZ, 2017-2019 Explorer, 2016-2019 Escape/MKC/Flex/MKT/Taurus/Transit/Expedition/F-Super Duty, and 2018-2019 EcoSport vehicles equipped with SYNC 3 may experience various SYNC performance related concerns. related concerns including but not limited to: Display operation concerns Navigation inoperative Voice recognition concerns Phone connection issues Dropped phone connections Applink related performance Travel Link not present or showing incorrect traffic Slow system response This may be due to the SYNC software. To correct the condition, follow the Service Procedure to update the accessory protocol interface module (APIM) software. NOTE: Ford has found some of the APIMs replaced and returned for inspection contained an outdated software level and the APIM did not require replacement. The customer concern may have been resolved by updating the APIM with latest level of software.
Source components: UNKNOWN OR OTHER.
Source record 11001174 at NHTSANHTSA communication ID: 10254138
NHTSA source summary · Original PDF not reviewed by Recallfolio
All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
Source components: EQUIPMENT.
Source record 10254138 at NHTSANHTSA communication ID: 10253963
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2017-2020 Model Year Continental and Super Duty, 2018-2020 Navigator, 2020 Aviator, and 2020 Explorer Vehicles Replace Front and/or Side Cameras if Foggy
Source components: EQUIPMENT.
Source record 10253963 at NHTSANHTSA communication ID: 10251952
NHTSA source summary · Original PDF not reviewed by Recallfolio
For 2015-2024 Ford and Lincoln vehicles equipped with turbocharged engines and customer concern of an engine oil leak, refer to Workshop Manual (WSM), Section 303-00 for oil leak inspection and testing methods. Ford has evaluated turbochargers replaced for oil leak symptoms and although oil may collect on the external surface of a turbocharger, it is extremely rare for a turbocharger assembly to be the root cause of the oil leak. Careful inspection of the turbocharger oil feed and drain tubes should be performed along with the recommended WSM procedures as needed. Warranty claims for turbocharger replacement going forward will be assessed.
Source components: ENGINE AND ENGINE COOLING.
Source record 10251952 at NHTSANHTSA communication ID: 10251934
NHTSA source summary · Original PDF not reviewed by Recallfolio
During service and repair requiring removal and replacement of a crankshaft bolt and/or crankshaft damper, achieving proper torque of the crankshaft pulley bolt is critical. Incorrect torque may allow the bolt to loosen resulting in the timing gear breaking and engine damage. Replacement of the bolt is critical to the repair and accurately following the installation procedure in the Workshop Manual (WSM) Section, 303-01 is extremely important. The bolt torque procedure can be found in the crankshaft front seal removal and installation procedure or in the engine assembly procedure.
Source components: POWER TRAIN.
Source record 10251934 at NHTSANHTSA communication ID: 10251453
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 22-2201 to update the Service Procedure and Parts List. Some 2015-2019 F-Super Duty and 2016-2019 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit an oil leak from the oil filter, crankcase vent oil separator, oil cooler, or upper/lower oil pan. This may be due to the mating surfaces of the upper oil pan and the engine block or to a clogged crankcase vent oil separator.
Source components: ENGINE AND ENGINE COOLING.
Source record 10251453 at NHTSANHTSA communication ID: 10249175
NHTSA source summary · Original PDF not reviewed by Recallfolio
2024 F-Super Duty vehicles are equipped with XL-22 (WSS-M2C184-A1) high temperature power steering fluid that looks like clear hydraulic fluid. This fluid is an improvement in high temperature and thermal oxidative stability compared to Mercon LV. This power steering fluid is also compatible and highly recommended to use when filling or topping off power steering systems of all 2012-2023 F-Super Duty vehicles originally equipped with Mercon LV.
Source components: STEERING.
Source record 10249175 at NHTSANHTSA communication ID: 10248992
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2019 F-Super Duty pick-up vehicles may require the additional KC3Z-14A411-C kit if there is a service need to replace the 14405 main body harness or 14A412 tailgate harness post FSA 19S48. During the FSA 19S48 repair, additional connectors are added to the 14405 and 14A412 that utilize the jumper service kit contained in the FSA. Direction regarding the need for this harness is also noted in the Ford parts catalog.
Source components: ELECTRICAL SYSTEM.
Source record 10248992 at NHTSANHTSA communication ID: 10243652
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2019 F-Super Duty and 2015-2020 F-150/Mustang vehicles may require replacement of the powertrain control module (PCM) for various reasons. While performing a programmable module installation (PMI) using the Integrated Diagnostic Service (IDS) scan tool, an error message may state: Configuration Failed, Would You Like To Retry? This may be due to improper module replacement steps. Make sure that the original module is installed in the vehicle, delete the vehicle session, then start a new vehicle session. Once the session starts, run the PCM PMI and install the new PCM only when the scan tool instructs. Finish the PMI by following the prompts given by IDS. If the original PCM is not available, it is possible to configure the module by running as-built programming on the PCM. When IDS asks to obtain part numbers or configuration data, select configuration data.
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10243652 at NHTSANHTSA communication ID: 10243609
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles equipped with power folding mirrors may exhibit power folding mirrors that are inoperative or exhibit a clicking sound. This may be due to the mirrors being manually folded in, during transportation, going through a car wash, bumped in a parking lot, or found during pre-delivery inspection (PDI). Prior to the replacement of any components, attempt to synchronize the mirrors by following the Power Mirrors Synchronization procedure. Refer to Workshop Manual (WSM) Section 501-09 Rear View Mirrors - General Procedures - Power Mirrors Synchronization.
Source components: EQUIPMENT.
Source record 10243609 at NHTSANHTSA communication ID: 10241626
NHTSA source summary · Original PDF not reviewed by Recallfolio
Various 2013-2019 vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P264F after powertrain control module (PCM) replacement. This DTC indicates that the engine serial number (ESN) must be programmed into the PCM. The ESN is located on PTS > Diagnostics tab > HVBoM > Features > Engine Serial Number. Once the ESN is obtained from the historical vehicle bill of materials (HvBOM), it can be programmed into the PCM using the appropriate Ford diagnostic scan tool. Navigate to the toolbox tab> powertrain menu> Service Functions> ESN.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM) · POWER TRAIN:MANUAL TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
Source record 10241626 at NHTSANHTSA communication ID: 10241547
NHTSA source summary · Original PDF not reviewed by Recallfolio
Various 2013-2019 vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P264F after powertrain control module (PCM) replacement. This DTC indicates that the engine serial number (ESN) must be programmed into the PCM. The ESN is located on PTS> OASIS> Features> Engine Serial Number. Once the ESN is obtained from the historical vehicle bill of materials (HvBOM), it can be programmed into the PCM using the appropriate Ford diagnostic scan tool. Navigate to the toolbox tab> powertrain menu> Service Functions> ESN.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
Source record 10241547 at NHTSANHTSA communication ID: 10241627
NHTSA source summary · Original PDF not reviewed by Recallfolio
In various 2017-2023 Ford and Lincoln vehicles, customers may receive a message in the FordPass or LincolnWay App stating Feature Unavailable. Since this is a fleet vehicle, it cannot access the (SYNC Connect) FordPass or LincolnWay app through the TCU Embedded Modem. If this message appears, the vehicle may be equipped with a fleet telematics module. Replacement of the TCU or TCU related repairs will not prevent this message from appearing. Refer the customer to in app FordPass Guides or LincolnWay Concierge Teams to aid with fleet telematics removal. Open app, select Account > Help > CHAT or CALL option.
Source components: ELECTRICAL SYSTEM.
Source record 10241627 at NHTSANHTSA communication ID: 10240719
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some F-Super Duty and F-150 vehicles equipped with trailer tow mirror may exhibit various exterior rear view mirror functional concerns that require replacement after diagnosis. To properly determine if the defect is warrantable, cleaning and close inspection of the affected mirror may be required. To aid in proper warranty determination, the Rear-View Mirror Analysis general service bulletin (GSB) has been updated with a detailed cleaning procedure that should be followed prior to any inspection. New labor operations (17682ZZ or 17682ZZT) have been created that covers the cleaning and inspection process and may be used even if condition of failure is non-warrantable. Ford has inspected numerous returned parts and determined many cases are caused by damage which is unwarrantable and may be subject to chargeback. Refer to the latest version of the GSB on OASIS.
Source components: EQUIPMENT · VISIBILITY:REARVIEW MIRRORS/DEVICES.
Source record 10240719 at NHTSANHTSA communication ID: 10238875
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2017-2020 Model Year Continental and Super Duty, 2018-2020 Navigator, 2020 Aviator, and 2020 Explorer Vehicles Replace Front and/or Side Cameras if Foggy
Source components: EQUIPMENT ADAPTIVE/MOBILITY · FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA · LANE DEPARTURE: SENSING SYSTEM: CAMERA.
Source record 10238875 at NHTSANHTSA communication ID: 10240743
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This article includes information on warranty, technical service tips and other service information.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10240743 at NHTSANHTSA communication ID: 10237789
NHTSA source summary · Original PDF not reviewed by Recallfolio
2011-2023 F-Super Duty and 2016-2024 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit an elevated idle condition. During prolonged idle time, vehicles may experience this elevated idle to reduce unburned hydrocarbons from the SCR. The powertrain control module estimates hydrocarbon levels in the SCR and may increase idle speed to remove them. Idle speed will be increased to 1000 RPM for ambient temperatures near 26°C (80°F) and may increase to 1200 RPM at -40 °C (-40°F). Vehicles may exhibit exhaust smoke and diesel exhaust fluid smell during elevated idle condition. Exhaust smoke and smell condition will not affect reliability or durability of the engine. Power take-off (PTO) use and idle set point control will disable elevated speed. It is required that the operator monitor the vehicle and adhere to any Exhaust Filter warning messages.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM · POWER TRAIN.
Source record 10237789 at NHTSANHTSA communication ID: 10236685
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2021 F-150 vehicles equipped with a 3.0L diesel engine, 2016-2022 F-650/F-750 vehicles equipped with a 6.7L engine, and 2017-2022 F-Super Duty vehicles equipped with a 6.7L engine and built on or before 08-Mar-2022 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P21DD, P20BA. P20B9, P204C, P208A, P208B, P208C, P203B, P205B, P21CD and/or U02A2 in the powertrain control module (PCM). This may be due to water intrusion within connectors C3613 and/or C4851/C3610 on the reductant harness going to the reductant pump/heater assembly and the reductant level sensor/quality module. This may also be due to movement of the wiring harness causing terminal fretting. To correct the condition, follow the Service Procedure to replace the reductant tank harness, the reductant pump/heater assembly and/or the reductant tank, as well as securing the wiring harness using a cable zip tie fastener.
Source components: ELECTRICAL SYSTEM.
Source record 10236685 at NHTSANHTSA communication ID: 10237442
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2017-2019 MY F250/F350 and all F450/550 vehicles Steering Linage Damper replacement. Reason for this supplement: Updated program terms, includes new mobile service repair assessment and updated owner letters with revised program terms.
Source components: EQUIPMENT · POWER TRAIN.
Source record 10237442 at NHTSANHTSA communication ID: 10234593
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2020 F-150 and 2017-2022 F-Super Duty vehicles may exhibit a lack of heat or cooling from the cabin vents when the climate control settings are adjusted between hot and cold. This may be due to a stuck/binding temperature door within the climate control housing or binding/inoperative temperature door actuator. Diagnostic trouble code (DTC) B1081:07 may be present in the front controls interface module (FCIM) or heating ventilation and air conditioning (HVAC) module. To correct the condition, follow the Service Procedure to remove the climate control housing and replace the temperature door cam(s), lubricate the temperature blend door bearing surface, and apply flock tape to actuator to seal out debris.
Source components: EQUIPMENT.
Source record 10234593 at NHTSANHTSA communication ID: 10235153
NHTSA source summary · Original PDF not reviewed by Recallfolio
For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.
Source components: STRUCTURE.
Source record 10235153 at NHTSANHTSA communication ID: 10230796
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2016-2019 F-Super Duty/F-650/F-750 vehicles equipped with a 6.7L engine may require the lower intake manifold to be removed for various concerns. The WSM, Section 303-01, has been updated to remove the lower intake manifold leaving the crankcase vent oil separator attached. Both parts should be removed from the engine together to avoid discarding and replacing the crankcase vent oil separator.
Source components: ENGINE AND ENGINE COOLING.
Source record 10230796 at NHTSANHTSA communication ID: 10228881
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles equipped with power folding mirrors may exhibit power folding mirrors that are inoperative or exhibit a clicking sound. This may be due to the mirrors being manually folded in, during transportation, going through a car wash, bumped in a parking lot, or found during pre-delivery inspection (PDI). Prior to the replacement of any components, attempt to synchronize the mirrors by following the Power Mirrors Synchronization procedure. Refer to Workshop Manual (WSM) Section 501-09 Rear View Mirrors - General Procedures - Power Mirrors Synchronization.
Source components: EQUIPMENT · VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR.
Source record 10228881 at NHTSANHTSA communication ID: 10228880
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2023 F-150, 2017-2022 F-Super Duty, and 2019-2023 Ranger vehicles may exhibit dust ingress into the cabin through the doors or air extractors. This may be due to the climate control system being in recirculation mode as a result of the recirculation button being on or automatic strategies for heating/cooling efficiency. To minimize dust ingress when driving in off-road or secondary road conditions, make sure that all doors and windows are fully closed and the climate control system is switched to defrost on and the instrument panel and footwell air vents are switched to off. Temperature and fan settings may be adjusted as desired. Alternatively, max defrost can be activated which will adjust all settings automatically. Operating in defrost mode will keep constant air flow through the rear air extractors and other small areas, helping minimize dust ingress.
Source components: BACK OVER PREVENTION · STRUCTURE:BODY:DOOR.
Source record 10228880 at NHTSANHTSA communication ID: 10228876
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
Source components: SERVICE BRAKES.
Source record 10228876 at NHTSANHTSA communication ID: 10228867
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2011-2022 F-Super Duty vehicles equipped with a 6.7L diesel engine may exhibit a ticking noise at idle after an engine oil change. It is often referred to as Typewriter Noise because of its similarity to the sound of a mechanical typewriter. When engine temperatures reach 150 ðF (65 ðC) or higher, (from engine idle up to approximately 1700 RPM's), this noise can typically be heard at the front wheel well and is often isolated to the transmission bell housing or oil pan area. Typewriter Noise is not detrimental to engine function or durability and has no short or long term effects on the engine. Do not attempt repairs to eliminate this noise. This noise is characteristic of the 6.7L diesel engine and will typically cease or diminish significantly within the oil change maintenance interval.
Source components: ENGINE AND ENGINE COOLING.
Source record 10228867 at NHTSANHTSA communication ID: 10226945
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2017-2022 Model Year Super Duty Vehicles Equipped with a Power Release Tailgate - Unintended Tailgate Opening REASON FOR THIS SUPPLEMENT Technical Information: Updated with revised instructions to account for wiring harness changes that were implemented into production and changes to the tailgate latch control assembly removal and installation procedures. As a result, the Labor Allowances and Parts Requirements / Ordering Information have also been updated accordingly. Parts Requirements/Ordering Information: All parts are on open order. Special Service Support Center (SSSC) contact is no longer required to order tailgate actuator ground wiring kit.
Source components: ELECTRICAL SYSTEM:WIRING · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · LATCHES/LOCKS/LINKAGES:FUELING/CHARGING DOOR/HATCH/PORT:LATCH/LOCK RELEASE SYSTEM · UNKNOWN OR OTHER.
Source record 10226945 at NHTSANHTSA communication ID: 10226756
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2022 F-150 and 2017-2022 F-Super Duty vehicles may experience issues with the tailgate center step moulding. If there is an issue with the center molding (warped, damaged condition, loose, or if the molding is missing), the trim cover is now available separately. It is no longer necessary to replace the entire rear step assembly (402A48).
Source components: STRUCTURE:BODY:TAILGATE.
Source record 10226756 at NHTSANHTSA communication ID: 10225446
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2019 F-Super Duty chassis cab/dual rear wheel (DRW) pickup vehicles and 2016-2019 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit a concern of oil consumption in applications where the engine is idled for extended periods of time. This may be due to high crankcase pressure as a result of the crankcase ventilation filter element becoming restricted. To correct the condition, follow the Service Procedure to replace the crankcase oil separator and to inspect the turbocharger to determine whether the turbocharger needs to be replaced. Note: The new crankcase vent oil separator appears different from the old crankcase vent oil separator as it no longer includes a serviceable filter element.
Source components: ENGINE AND ENGINE COOLING.
Source record 10225446 at NHTSANHTSA communication ID: 10225454
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2020 F-Super Duty vehicles equipped with dual rear wheels (DRW) and 17 inch aluminum wheels may exhibit a loss of tire pressure from the valve stem sealing area of the front wheels. This may be due to corrosion of the wheel preventing the valve stem from sealing properly. To correct the condition, follow the Service Procedure to clean the corrosion from the valve stem sealing area of the affected wheel.
Source components: WHEELS.
Source record 10225454 at NHTSANHTSA communication ID: 10222789
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2022 F-250-F-550, 2015-2020 F-150 and 2018-2022 Expedition vehicles without push button start and passive entry may exhibit a condition where it is difficult to insert the ignition key and/or turn it to the accessory position when removing the ignition lock cylinder per the functional lock cylinder service procedure in Workshop Manual (WSM), Section 501-14. This may be due to debris or contamination in the ignition lock cylinder. If this concern occurs, use a suitable shop vacuum to dislodge or remove debris or contamination by placing the vacuum hose over the lock cylinder, without the key installed, for 30 seconds. Insert the ignition key and reattempt turning it to the accessory position for lock cylinder removal. If the key will not turn to the accessory position, continue with the non-functional lock cylinder removal procedure.
Source components: ELECTRICAL SYSTEM:STARTER ASSEMBLY.
Source record 10222789 at NHTSANHTSA communication ID: 10222788
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
Source components: SERVICE BRAKES, HYDRAULIC.
Source record 10222788 at NHTSANHTSA communication ID: 10222258
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2019 F-Super Duty vehicles equipped with adaptive steering may require steering wheel replacement for various reasons. The steering wheel assembly contains the steering effort control module (SECM) and steering angle sensor module (SASM). Previous software versions of the Integrated Diagnostic Software (IDS) scan tool may not have programed the SECM properly after replacement. Engineering has corrected the concern and SECM programming can now be successfully performed on these vehicles using the latest software level of IDS.
Source components: STEERING.
Source record 10222258 at NHTSANHTSA communication ID: 10222191
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2019 F-Super Duty vehicles may experience a transmission fluid leak from a cracked transmission case or transmission fluid pan. This may be due to a driveline vibration condition. For vehicles that have a concern with a cracked transmission case (Figures 1-2) or fluid pan (Figures 3-4), the rear driveline imbalance most often is the root cause of this concern. To correct the condition, follow the Service Procedure to replace the rear driveline.
Source components: POWER TRAIN.
Source record 10222191 at NHTSANHTSA communication ID: 10218896
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2017-2022 Model Year Super Duty Vehicles Equipped with a Power Release Tailgate - Unintended Tailgate Opening ;REASON FOR THIS SUPPLEMENT Technical Information: Updated with revised instructions to account for wire color differences across multiple model year vehicles.
Source components: ELECTRICAL SYSTEM.
Source record 10218896 at NHTSANHTSA communication ID: 10218614
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2022 F-Super Duty vehicles may experience a loose/sagging underbody insulator that could be seen or heard by the customer. This may be due to insufficient retention. To correct the condition, follow the Service Procedure to re-secure the insulator and adding additional clamping points.
Source components: STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS.
Source record 10218614 at NHTSANHTSA communication ID: 10217028
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2022 Ford/Lincoln customers may experience a notification in the FordPassÃÂÃÂÃÂî/LincolnWayÃÂÃÂÃÂî app indicating Vehicle Has Entered Deep Sleep Mode. This occurs when the vehicle has not been started for 14 consecutive days, battery voltage is at/below 9.5 volts or the body control module (BCM) 12 volt battery state of charge (SOC) drops below 50%. A warning may also set if the telematic control unit (TCU) has received an over the air update. The TCU powers down all communication when in this mode and app features are disabled. Manually start the vehicle to wake if from mode. More information is located in the app under: Account > Help > search 'Deep Sleep' in the entry box. If the condition remains, check the BCM 12v SOC. If the SOC does not change after charging the battery or after BMS reset is performed, continue with normal battery and/or BMS sensor diagnostics.
Source components: ELECTRICAL SYSTEM.
Source record 10217028 at NHTSANHTSA communication ID: 10216955
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2019 F-Super Duty/F-650/F-750 vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P24D1 stored in the powertrain control module (PCM). To correct the condition, replace the particulate matter (PM) sensor. Refer to Workshop Manual (WSM), Section 303-14. For F-650/F-750 vehicles, use LC4Z-5L216-A. For F-Super Duty pickup and 203 inch wheelbase chassis cab vehicles, use LC3Z-5L216-C. For F-Super Duty 145/179/192 inch wheelbase chassis cab vehicles, use LC3Z-5L216-B. For F-Super Duty 168/169/193/205 inch wheelbase chassis cab vehicles, use LC3Z-5L216-A. Do not attempt a programmable module installation (PMI) after installation of the PM sensor. For claiming, use causal part 5L239 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Source components: POWER TRAIN.
Source record 10216955 at NHTSANHTSA communication ID: 10216489
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2017-2022 Model Year Super Duty Vehicles Equipped with a Power Release Tailgate - Unintended Tailgate Opening. In the affected vehicles, some customers report experiencing an unintended tailgate opening and may have previously serviced their vehicle for this concern. Ford had developed an enhanced remedy for customers who may want this enhanced repair performed n their vehicle.
Source components: EQUIPMENT · LATCHES/LOCKS/LINKAGES · STRUCTURE:BODY:TAILGATE.
Source record 10216489 at NHTSANHTSA communication ID: 10216060
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2022 F-150, 2017-2022 F-Super Duty and 2018-2022 Expedition/Navigator vehicles may exhibit poor air conditioning (A/C) performance. Workshop Manual (WSM) diagnostic procedures have been updated to more accurately diagnose A/C performance concerns. Refer to the updated Diagnosis and Testing, and General Procedure in the WSM, Section 412-00 Climate Control System for diagnostic procedures
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER · VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM.
Source record 10216060 at NHTSANHTSA communication ID: 10214134
NHTSA source summary · Original PDF not reviewed by Recallfolio
In the affected vehicles, some customers report experiencing an unintended tailgate opening and may have previously serviced their vehicle for this concern. Ford has developed an enhanced remedy for customers who may want this enhanced repair performed on their vehicle.
Source components: LATCHES/LOCKS/LINKAGES · LATCHES/LOCKS/LINKAGES:TAILGATE:LATCH.
Source record 10214134 at NHTSANHTSA communication ID: 10214130
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2017 through 2019 Model Year F250/350 4x4 and all F450/550 Vehicles - Steering Linkage Damper Replacement. In some of the affected vehicles, customers may experience sustained steering wheel oscillation after hitting rough pavement or an expansion joint at speeds typically above 45 mph (72 Km/h).
Source components: STEERING.
Source record 10214130 at NHTSANHTSA communication ID: 10214123
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2019 F-Super Duty chassis cab/dual rear wheel (DRW) pickup vehicles and 2016-2019 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit a concern of oil consumption in applications where the engine is idled for extended periods of time. This may be due to high crankcase pressure as a result of the crankcase ventilation filter element becoming restricted. To correct the condition, follow the Service Procedure to replace the crankcase oil separator and to inspect the turbocharger to determine whether the turbocharger needs to be replaced.
Source components: ENGINE AND ENGINE COOLING.
Source record 10214123 at NHTSANHTSA communication ID: 10212957
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2013-2023 Ford or Lincoln vehicles with modems activated through FordPass or LincolnWay may experience 12 volt battery drain symptoms when the customer uses non-Ford/Lincoln phone applications as an alternate channel to access vehicle commands such as door lock/unlock, remote start, vehicle location, etc. The battery drain may be caused by excessive calls for data through the vehicle network keeping it in an activated state. Recommend that the customer uninstall the app to ensure this is not contributing to battery symptoms experienced. Advise the customer that unaffiliated third-party app developers do not work directly with Ford to adhere to security, vehicle communication, and privacy requirements.
Source components: ELECTRICAL SYSTEM.
Source record 10212957 at NHTSANHTSA communication ID: 10212107
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2019 F-Super Duty/F-650/F-750 vehicles equipped with a 6.7L may exhibit an engine oil leak. This may be due to the mating surface of the upper oil pan and the engine block. To correct the condition, follow the Service Procedure to reseal the engine block.
Source components: ENGINE AND ENGINE COOLING.
Source record 10212107 at NHTSANHTSA communication ID: 10211995
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2017-2022 Model Year Super Duty Vehicles Equipped with a Power Release Tailgate - Unintended Tailgate Opening - In the affected vehicles, some customers report experiencing an unintended tailgate opening and may have previously serviced their vehicle for this concern. Ford has developed an enhanced remedy for customers who may want this enhanced repair performed on their vehicle.
Source components: LATCHES/LOCKS/LINKAGES:TAILGATE:LOCK · UNKNOWN OR OTHER.
Source record 10211995 at NHTSANHTSA communication ID: 10212120
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2020 F-150, 2017-2022 Super Duty and 2018-2021 Expedition vehicles may experience a cracked or splitting driver air bag cover. This may be due to the air bag cover tear seam design. An updated driver air bag assembly has been released with a more robust air bag cover design. Refer to Workshop Manual (WSM), Section 501-20B for the replacement procedure. If servicing under warranty, use causal part 15043B13 for F-150 and Expedition or 25043B13 for Super Duty and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Source components: AIR BAGS.
Source record 10212120 at NHTSANHTSA communication ID: 10212102
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2021 F-150 vehicles equipped with a 3.0L diesel engine, 2016-2022 F-650/F-750 vehicles equipped with a 6.7L engine, and 2017-2022 F-Super Duty vehicles equipped with a 6.7L engine and built on or before 08-Mar-2022 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P21DD, P20BA. P20B9, P204C, P208A, P208B, P208C, P203B, P205B, P21CD and/or U02A2 in the powertrain control module (PCM). This may be due to water intrusion within connectors C3613 and/or C4851/C3610 on the reductant harness going to the reductant pump/heater assembly and the reductant level sensor/quality module. This may also be due to movement of the wiring harness causing terminal fretting. To correct the condition, follow the Service Procedure to replace the reductant tank harness, the reductant pump/heater assembly and/or the reductant tank, as well as securing the wiring harness using a cable zip tie fastener.
Source components: ELECTRICAL SYSTEM.
Source record 10212102 at NHTSANHTSA communication ID: 10210805
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2022 F-Super Duty vehicles may exhibit a pull / drift condition during braking. This may be due to the brake pads needing to be broken in. The Workshop Manual, Section 206-00 Symptom Chart for vehicle pulls or drifts during braking has been updated to reflect this information.
Source components: SERVICE BRAKES.
Source record 10210805 at NHTSANHTSA communication ID: 10210941
NHTSA source summary · Original PDF not reviewed by Recallfolio
In various 2017-2022 Ford and Lincoln vehicles, customers may receive a message in the FordPass or LincolnWay App stating "Feature Unavailable. Since this is a fleet vehicle, it cannot access the (SYNC Connect) FordPass or LincolnWay app through the TCU Embedded Modem. If this message appears, the vehicle may be equipped with a fleet telematics module. Replacement of the TCU or TCU related repairs will not prevent this message from appearing. Please refer the customer to in app FordPass Guides or LincolnWay Concierge Teams to aid with fleet telematics removal. Open app, select Account > Help > CHAT or CALL option
Source components: COMMUNICATION:MANUFACTURER TELEMATICS · EQUIPMENT.
Source record 10210941 at NHTSANHTSA communication ID: 10209384
NHTSA source summary · Original PDF not reviewed by Recallfolio
2011-2022 F-Super Duty and 2016-2023 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit an elevated idle condition. During prolonged idle time, vehicles may experience this elevated idle to reduce unburned hydrocarbons from the SCR. The powertrain control module estimates hydrocarbon levels in the SCR and may increase idle speed to remove them. Idle speed will be increased to 1000 RPM for ambient temperatures near 26°C (80°F) and may increase to 1200 RPM at -40 °C (-40°F). Vehicles may exhibit exhaust smoke and diesel exhaust fluid smell during elevated idle condition. Exhaust smoke and smell condition will not affect reliability or durability of the engine. Power take-off (PTO) use and idle set point control will disable elevated speed. It is required that the operator monitor the vehicle and adhere to any Exhaust Filter warning messages.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE.
Source record 10209384 at NHTSANHTSA communication ID: 10209209
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 21-2236 to update the models and year affected. Some 2013-2018 C-Max, 2013-2020 Fusion/MKZ, 2013-2022 Escape, 2015-2018 Focus, 2015-2019 MKC, 2015-2022 Edge/F150/Mustang, 2016-2018 MKX, 2016-2019 Explorer, 2017-2022 F-Super Duty, 2018-2022 EcoSport/Expedition, 2019-2022 Ranger/Nautilus, 2021-2022 Bronco/Bronco Sport/Mustang Mach-E, 2022 Maverick vehicles may experience seat pan looseness, lateral movement, or a clunk/thump noise on turns. This may be due to the seat pan track. To correct the condition, follow the Service Procedure steps to install a reinforcement.
Source components: EQUIPMENT · EQUIPMENT:MECHANICAL · SEATS.
Source record 10209209 at NHTSANHTSA communication ID: 10209031
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2022 F-150, 2017-2022 F-Super Duty and 2018-2022 Expedition/Navigator vehicles may exhibit poor air conditioning (A/C) performance, loss of airflow and/or engine cooling fans running continuously from high A/C pressures. This concern may be from the evaporator freezing up due to the evaporator temperature sensor being biased. To correct the condition, follow the Service Procedure steps to replace the evaporator temperature sensor.
Source components: ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN · UNKNOWN OR OTHER.
Source record 10209031 at NHTSANHTSA communication ID: 10208829
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2020 F-150, 2017-2022 F-Super Duty and 2016-2022 F-650/F-750 vehicles equipped with a diesel engine may exhibit diagnostic trouble code (DTC) P0000 stored in the powertrain control module (PCM) after an on-demand self test. This DTC is due to a processing error in the PCM as a result of on-demand self testing. P0000 is an invalid DTC that will not illuminate the malfunction indicator lamp (MIL) and no repairs should be performed.
Source components: EQUIPMENT · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
Source record 10208829 at NHTSANHTSA communication ID: 10208146
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2018 Focus/MKX/C-MAX, 2017-2019 MKC/Taurus/Flex/MKT, 2017-2020 Fusion/MKZ/Continental, 2017-2022 Mustang/Edge/Explorer/Police Interceptor Utility/Escape/F-150/F-Super Duty, 2018-2022 Expedition/Navigator, 2019-2022 Ranger/Nautilus, 2020-2022 Corsair/Aviator, and 2021-2022 Mustang Mach-E vehicles may exhibit a noisy, incorrectly operating, and/or inoperative seat motor. This may be due to a damaged or inoperative seat track motor. A lower level service part has been released to correct noisy, incorrect operation/inoperative seat track motors.
Source components: SEATS.
Source record 10208146 at NHTSANHTSA communication ID: 10207140
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2022 F-Super-Duty vehicles equipped with a 6.7L diesel engine may exhibit a hard start, lack of power and/or runs rough concern with an illuminated malfunction indicator light (MIL) and diagnostic trouble codes (DTCs) P0087 and/or P008A. This may be due to low fuel level or fuel gelling in cold ambient temperatures. If no root cause is determined after normal Powertrain Control/Emissions Diagnosis (PC/ED) pinpoint test MA, recommend that the customer use a different brand of fuel and use Motorcraftî PM-23-A Diesel Fuel Anti-Gel and Performance Improver. Inform the customer that bio-diesel blended fuels have a higher occurrence of fuel gelling. Fuel gelling and or low fuel conditions causing a P0087 and/or P008A is not covered under warranty.
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL · FUEL SYSTEM, DIESEL · POWER TRAIN.
Source record 10207140 at NHTSANHTSA communication ID: 10206843
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2021 F-150, 2017-2021 Super Duty and 2018-2021 Expedition/Navigator vehicles may exhibit poor air conditioning (A/C) performance, loss of airflow and/or engine cooling fans running continuously from high A/C pressures. This concern may be from the evaporator freezing up due to the evaporator temperature sensor being biased. To correct the condition, follow the Service Procedure steps to replace the evaporator temperature sensor.
Source components: ENGINE · ENGINE AND ENGINE COOLING.
Source record 10206843 at NHTSANHTSA communication ID: 10205694
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2016-2021 Ford and Lincoln vehicles equipped with SYNC 3 may exhibit a condition where the navigation voice prompts are inoperative after a SYNC map update. This may be due to an incomplete installation of the SYNC map software. If possible, using the original USB that installed the update, reperform the update and verify the navigation voice prompts have returned. Multiple reboots are expected when this update is being performed. Verify the Installation Is Complete message displays in the touch screen. If the original USB is not available, go to website https://syncnavigation.com/ford/home or https://syncnavigation.com/lincoln/home to download the files once more for the affected vehicle. For further map update support, reference the FAQ section on these websites.
Source components: ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).
Source record 10205694 at NHTSANHTSA communication ID: 10205718
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2021 Aviator vehicles equipped with a 3.0L PHEV powertrain may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) U0100, P1A42 and/or P1A43 stored in battery energy control module (BECM). This may be due to software in the PCM. To correct the condition, follow the service procedure to perform a coordinated flash on the powertrain control module (PCM), secondary on-board diagnostic module c (SOBDMC), anti-lock braking system (ABS) module, BECM, and battery charger control module (BCCM).
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
Source record 10205718 at NHTSANHTSA communication ID: 10205532
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 21-2192 to update the Parts List and Issue. Some 2017-2019 F-Super Duty/F-650/F-750 vehicles equipped with a 6.7L may exhibit an engine oil leak. This may be due to the mating surface of the upper oil pan and the engine block. To correct the condition, follow the Service Procedure to reseal the engine block.
Source components: ENGINE AND ENGINE COOLING.
Source record 10205532 at NHTSANHTSA communication ID: 10205446
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2022 F-Super Duty and 2016-2022 F-650/F-750 with 6.7L diesel engines, 2015-2019 Transit with 3.2L diesel engines and 2018-2021 F-150 with 3.0L diesel engines may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P206C in the powertrain control module (PCM). Review of repair data supports that P206C is often the result of incorrect diesel exhaust fluid (DEF) concentration. Per Powertrain Control/Emissions Diagnosis (PC/ED) Pinpoint Test (PPT) RJ, a DEF concentration reading below 28% will set P206C and cause vehicle derate. If low concentration is suspected, drain fluid and replace with known good DEF before replacing any parts. Low concentration of DEF is not a warrantable condition.
Source components: ENGINE AND ENGINE COOLING.
Source record 10205446 at NHTSANHTSA communication ID: 10202716
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2015 through 2016 Model Year Super Duty and 2016 through 2019 Medium Duty with 6.7L Diesel Engine; Diesel Particulate Filter Warranty Extension with Diagnostic Trouble Code P2002 REASON FOR THIS SUPPLEMENT Claim Preparation and Submission: Updated Customer Concern Code. Owner Notification Mailing Schedule: Owner Mailing date revised.
Source components: COMMUNICATION · ENGINE AND ENGINE COOLING:ENGINE:DIESEL · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10202716 at NHTSANHTSA communication ID: 10202714
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017 F-Super Duty vehicles equipped with a 6.7L diesel engine may exhibit an illuminated malfunction indicator lamp (MIL) with only diagnostic trouble codes (DTCs) P00BD, P012F, P0181, P0474, P124C, P1247, P20EE, P205B, P2263, P2269, P2459, and/or P259F stored in the powertrain control module (PCM). This may be due to various strategies within the PCM software. To resolve this condition, update the PCM software and perform a diesel particulate filter (DPF) manual regeneration and, if necessary, a DPF parameter reset according to the Service Procedure.
Source components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM) · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE.
Source record 10202714 at NHTSANHTSA communication ID: 10202616
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2019 F-Super Duty vehicles may experience an intermittent no crank condition. Diagnostic trouble code (DTC) P06E9 may also be set in the powertrain control module (PCM). This may be due to corrosion being present on the run start relay in the battery junction box (BJB). Inspect the run start relay for signs of corrosion, including along the terminal edges, prior to performing Workshop Manual (WSM) diagnostics. If corrosion is found, replace the run start relay with new service part, MU5Z-14N089-A. If no corrosion is found on the run start relay, refer to WSM, Section 303-06 for normal diagnostics.
Source components: ENGINE · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
Source record 10202616 at NHTSANHTSA communication ID: 10201907
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2020 F-150 vehicles built on or before 1-Apr-2020 equipped with a 3.0L diesel engine, 2017-2019 F-Super Duty vehicles built on or before 30-Oct-2019 equipped with a 6.7L engine and 2016-2019 F-650/F-750 vehicles built on or before 30-Oct-2019 equipped with a 6.7L engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P21DD, P20BA. P20B9, P204C, P208A, P208B, P208C, P203B, P205B, P21CD and/or U02A2 in the powertrain control module (PCM). This may be due to water intrusion within connectors C3613 and/or C4851/C3610 on the reductant harness going to the reductant pump/heater assembly and the reductant level sensor/quality module. To correct the condition, follow the Service Procedure steps to replace the reductant tank harness, the reductant pump/heater assembly and/or the reductant tank.
Source components: ELECTRICAL SYSTEM · ENGINE · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
Source record 10201907 at NHTSANHTSA communication ID: 10201639
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2020 Super Duty vehicles equipped with a 6.7L engine built on or after 13-May-2017, 2015-2019 Transit vehicles equipped with a 3.2L engine and 2018-2020 F-150 vehicles equipped with a 3.0L engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P2002 stored in the powertrain control module (PCM). This may be due to a crack in the diesel particulate filter (DPF) substrate. To correct the condition, follow the Service Procedure steps to replace the DPF and then reprogram the PCM.
Source components: ENGINE AND ENGINE COOLING.
Source record 10201639 at NHTSANHTSA communication ID: 10201606
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2020 Expedition/Navigator, 2015-2020 F150 and 2017-2020 F-Super Duty vehicles equipped with power running boards (PRB) may exhibit a condition where the PRBs are disabled, changing the feature menu setting from Auto to Off mode in the instrumental panel cluster (IPC), DTC U3003:16 stored in the running board control module (RBM) and with or without an illuminated charging system indicator lamp. This may be due to a low battery voltage event or a fully discharged battery. To correct this condition, inspect the charging system and correct the low battery voltage event. Refer to Workshop Manual (WSM), Section 501-08 > Diagnosis and Testing. Configure the PRB system mode from Off to Auto mode in the Advance Settings of the IPC. Refer to the Owner's Manual > Power Running Boards.
Source components: ELECTRICAL SYSTEM · EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10201606 at NHTSANHTSA communication ID: 10201618
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2021 F-150, 2017-2021 F-Super Duty and 2018-2021 Expedition/Navigator vehicles equipped with a vista roof opening panel may exhibit a binding/sticking, glass stuck open or closed, noisy operation including chatter, rattling, or grinding. This may be due to the glass panel brackets cracking and/or breaking apart. The glass panel brackets are serviceable separately from the frame assembly and require the roof opening panel glass to be moved to the vent position. To correct the condition, follow the Service Procedure to replace the roof opening panel glass brackets
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · STRUCTURE:BODY:ROOF AND PILLARS · VISIBILITY:SUN/MOON ROOF ASSEMBLY.
Source record 10201618 at NHTSANHTSA communication ID: 10201612
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2020 F-150, 2017-2020 Super Duty and 2018-2020 Expedition/Navigator vehicles may exhibit poor air conditioning (A/C) performance, loss of airflow and/or engine cooling fans running continuously from high A/C pressures. This concern may be from the evaporator freezing up due to the evaporator temperature sensor being biased. To correct the condition, follow the Service Procedure steps to replace the evaporator temperature sensor.
Source components: ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN · EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10201612 at NHTSANHTSA communication ID: 10201038
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2019 F-Super Duty and 2016-2019 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit an oil leak from the oil filter, crankcase vent oil separator, oil cooler, upper/lower oil pan. This may be due to a clogged crankcase vent oil separator and/or a sealing concern. Do not remove/replace the engine front cover for upper oil pan leaks. Do not check for warpage on the upper oil pan. When the upper oil pan is not bolted to the vehicle, it has a natural tendency to twist slightly due to the manufacturing process for the pan and will not result in an oil leak. The Workshop Manual (Section 303-00 > Diagnosis and Testing > Engine > Engine Oil Leaks) provides information on the usage of fluorescent oil dye to locate the source of an oil leak. Refer to GSB Oil Leaks Weeps And Seeps for more oil leak diagnosis. Continue to monitor OASIS for updates.
Source components: ENGINE AND ENGINE COOLING.
Source record 10201038 at NHTSANHTSA communication ID: 10201034
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2013-2021 Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
Source components: SERVICE BRAKES, ELECTRIC:SOFTWARE/PROGRAMMING.
Source record 10201034 at NHTSANHTSA communication ID: 10201019
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2021 Ford and Lincoln vehicle customers may receive a message in their FordPass or Lincoln Way App stating Feature Unavailable. Since this is a fleet vehicle, it cannot access the SYNC Connect or FordPass Connect feature or Lincoln Connect or Embedded Modem Do not replace the TCU or perform any repair to resolve this condition. Refer the owner of the vehicle to Ford Pass Guides or Lincoln Way Concierge Teams to assist in removing the fleet telematics subscription.
Source components: POWER TRAIN:MANUAL TRANSMISSION:INTERNAL:DOGS/SYNCHROS.
Source record 10201019 at NHTSANHTSA communication ID: 10201013
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2016-2021 Ford or Lincoln vehicles equipped with SYNC 3 or SYNC 4 may exhibit a blank screen or other various SYNC symptoms only when the vehicle is in transport mode. This is considered normal due to the power saving features enabled while in transport mode. It is beneficial for battery life to keep the vehicle in transport mode until the vehicle is prepped for sale. To prevent a SYNC system lockup during transport mode deactivation, follow the Workshop Manual (WSM) procedure exactly allowing time for the SYNC system to complete its tasks such as fully booting up or powering down and shutting off before moving to the next step of the procedure. If the vehicle exhibits a blank screen or SYNC symptoms after transport mode deactivation, refer to WSM, Section 415-00 for normal diagnosis. The SYNC version can be confirmed via OASIS.
Source components: ELECTRICAL SYSTEM.
Source record 10201013 at NHTSANHTSA communication ID: 10200733
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2019 F-Super Duty/F-650/F-750 vehicles equipped with a 6.7L may exhibit an engine oil leak. This may be due to the mating surface of the upper oil pan and the engine block. An oil leak in this area may also be influenced by a blocked crankcase oil vent separator. To correct the condition, follow the Service Procedure to reseal the engine block.
Source components: ENGINE AND ENGINE COOLING.
Source record 10200733 at NHTSANHTSA communication ID: 10199653
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2022 F-Super Duty vehicles equipped with four-wheel drive (4WD) may exhibit steering bind or front driveline noise because the hublocks do not automatically disengage immediately following a shift from 4WD to two-wheel drive (2WD). This may be due to driveline tension between the axle and hub keeping them engaged. To correct the condition, shift the vehicle from DRIVE to REVERSE to release the driveline tension. This is a normal operating characteristic of the vehicle and replacement of the hublocks is not recommended. If the concern remains after shifting into REVERSE and allowing the vehicle to move approximately 5 feet (1.5 meters), remove and inspect the hublocks for any damage. Refer to Workshop Manual (WSM), Section 308-07A. Repair as necessary.
Source components: POWER TRAIN.
Source record 10199653 at NHTSANHTSA communication ID: 10199536
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2013-2018 C-Max, 2013-2020 Fusion/MKZ, 2013-2021 Escape, 2015-2018 Focus, 2015-2019 MKC, 2015-2021 Edge/F150/Mustang, 2016-2018 MKX, 2016-2019 Explorer, 2017-2021 F-Super Duty, 2018-2021 EcoSport/Expedition, 2019-2021 Ranger/Nautilus, 2021 Bronco Sport/Mustang Mach-E vehicles may experience seat pan looseness, lateral movement, or a clunk/thump noise on turns. This may be due to the seat pan track. To correct the condition, follow the Service Procedure steps to install a reinforcement.
Source components: SEATS.
Source record 10199536 at NHTSANHTSA communication ID: 10199523
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2019 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P208E stored in the powertrain control module (PCM). This may be due to the PCM software. To correct the condition, follow the Service Procedure to reprogram the PCM.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
Source record 10199523 at NHTSANHTSA communication ID: 10199478
NHTSA source summary · Original PDF not reviewed by Recallfolio
On your vehicle, moisture and water entering a power door lock actuator housing could cause the actuator motor to momentarily freeze in cold temperatures and may also cause actuator motor corrosion over time. Frozen water within a power door lock actuator housing or corrosion of the power door lock actuator motor could result in an inoperative power door lock function on the affected door.
Source components: LATCHES/LOCKS/LINKAGES.
Source record 10199478 at NHTSANHTSA communication ID: 10198638
NHTSA source summary · Original PDF not reviewed by Recallfolio
In some of the affected vehicles, moisture and water entering a power door lock actuator housing can cause the actuator motor to momentarily freeze in cold temperatures and may also cause actuator motor corrosion over time. Frozen water within a power door lock actuator housing or corrosion of the power door lock actuator motor could result in an inoperative power door lock function on the affected door.
Source components: LATCHES/LOCKS/LINKAGES.
Source record 10198638 at NHTSANHTSA communication ID: 10198687
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 21-2144 to update the vehicle model years affected and the Part List. Some 2015-2020 F-150 and 2017-2021 F-Super Duty vehicles may exhibit a lack of heat or cooling from the cabin vents when the climate control settings are adjusted between hot and cold. This may be due to a stuck/binding temperature door within the climate control housing or binding/inoperative temperature door actuator. Diagnostic trouble code (DTC) B1081:07 may be present in the front controls interface module (FCIM). To correct the condition, follow the Service Procedure steps to remove the climate control housing and replace the temperature door actuator(s) and/or lubricate the temperature blend door bearing surface.
Source components: EQUIPMENT.
Source record 10198687 at NHTSANHTSA communication ID: 10198637
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2019 F-Super Duty vehicles equipped with the factory 5th-wheel gooseneck hitch prep package may require replacement of the pickup bed. The 2020 F-Super Duty pickup beds have superseded the 2017-2019 F-Super Duty pickup bed and the existing rear bed plug/connector housing is not interchangeable with the new style pickup bed. To correct the condition, order and install wiring harness LC3Z-13A576-H, which contains the new style connector housing.
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10198637 at NHTSANHTSA communication ID: 10198625
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2019 F-Super Duty/F-650/F-750 vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P24D1 stored in the powertrain control module (PCM). To correct the condition, replace the particulate matter sensor. Refer to Workshop Manual (WSM), Section 303-14. For F-650/F-750 vehicles, use LC4Z-5L216-A. For F-Super Duty pickup and 203" wheelbase chassis cab vehicles, use LC3Z-5L216-C. For F-Super Duty 145/179/192" wheelbase chassis cab vehicles, use LC3Z-5L216-B. For F-Super Duty 168/169/193/205" wheelbase chassis cab vehicles, use LC3Z-5L216-A. For claiming, use causal part 5L239 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Source components: FUEL SYSTEM, GASOLINE.
Source record 10198625 at NHTSANHTSA communication ID: 10198605
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2016 MKS, 2016-2017 Navigator, 2016-2018 F-150/Focus/C-MAX/Edge/Fiesta/MKX/Transit Connect/Mustang, 2017-2018 Continental/Fusion/MKZ, 2017-2019 Explorer, 2016-2019 Escape/MKC/Flex/MKT/Taurus/Transit/Expedition/F-Super Duty, and 2018-2019 EcoSport vehicles equipped with SYNC 3 may experience various SYNC performance related concerns.
Source components: ELECTRICAL SYSTEM.
Source record 10198605 at NHTSANHTSA communication ID: 10194794
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2019 F-250/F-350 4WD vehicles may exhibit a sustained steering wheel oscillation after hitting rough pavement or an expansion joint above 45 mph (72 km/h). This may be due to excessive lag/lash of the steering linkage damper. To correct the condition, follow the Service Procedure to replace the steering linkage damper.
Source components: EQUIPMENT · STEERING.
Source record 10194794 at NHTSA