The vehicle dossier US · 2012

2012 Ford
F-250 SDProblems & recalls

57 distinct owner reports in the NHTSA snapshot. Engine appears in 22 of them. Explore what was reported—and which official actions are on file.

Snapshot Sep 28, 2026Live NHTSA complaint API How this dossier is compiled

01 / Owner-reported evidence

What owners reported.

Categories attached to 57 distinct reports. A report can mention more than one component, so category totals can overlap.

Engine22 reports
Steering18 reports
Suspension14 reports
Other components11 reports
Electrical system10 reports
Fuel system6 reports
Brakes4 reports
Transmission & drivetrain3 reports
Air bags1 reports
Visibility1 reports
See original component labels
STEERING18
ENGINE15
SUSPENSION14
ELECTRICAL SYSTEM10
ENGINE AND ENGINE COOLING:ENGINE:DIESEL7
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM6
FUEL/PROPULSION SYSTEM4
SERVICE BRAKES4
POWER TRAIN3
WHEELS3
UNKNOWN OR OTHER3
FUEL SYSTEM, DIESEL2
TIRES2
SEAT BELTS1
AIR BAGS1
ELECTRONIC STABILITY CONTROL (ESC)1
VISIBILITY/WIPER1
VEHICLE SPEED CONTROL:ACCELERATOR PEDAL1
LATCHES/LOCKS/LINKAGES1

These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.

The reporting timeline

When reports arrived.

Reports by year filed, not by the year a problem occurred. Showing the latest 9 years with reports.

Year filed (last two digits)Latest report: Feb 27, 2023
Mileage, where supplied

55,118 miles is the median among 54 reports with usable mileage. The middle half spans 30,000–70,000 miles.

This describes the submitted reports. It does not predict when a vehicle will fail.

02 / Official safety campaigns

1 recall campaign on file.

A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.

Dec 9, 2020 Safety recallEQUIPMENTCampaign 20E090000

Reported concern

Icon Vehicle Dynamics, LLC (Icon) is recalling all 05-UP FSD 2.5 Centerline Stabilizer Kits with part number 65050. The kits were sold as an accessory for certain 2005-2021 Ford F-250 4X4 and F-350 4X4 pickup trucks. The foam ring inside the stabilizer "through shaft" may block the piston ports, possibly causing the steering to lock up.

Manufacturer’s stated response

Icon will notify owners, and dealers will install a new shock assembly with a revised foam ring and steel support disc, free of charge. The recall began December 21, 2020. Owners may contact Icon customer service at 1-951-689-4266.

Read campaign 20E090000 at NHTSA
Check this car’s VIN at NHTSA

03 / The manufacturer’s record

Instructions. Updates. Responses.

136 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.

Feb 24, 2026 Service Bulletin/Repair InstructionsSSM 54601Ford and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory wireless keyless entry keypad systems may or may not come with a wallet card containing the master code. Unlike the integrated wired keypa…NHTSA ID 11029052

Ford and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory wireless keyless entry keypad systems may or may not come with a wallet card containing the master code. Unlike the integrated wired keypad, the accessory wireless keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool or from the label printed on the body control module (BCM). The Factory Keyless Entry Code application within the diagnostic scan tool will not provide an applicable master code for the accessory wireless keypad. If the wallet card for an accessory keypad is not available, the "Wireless RF Keypad Diagnosis Guide" can be referenced and provides direction on how to retrieve the master code. This guide is located under the Workshop Manual tab > Accessories > Installation > Wireless RF Keypad Diagnosis Guide > PPT C > Step C2.<br /><br /> Note: The only available keypad for some vehicles from the assembly plant is the accessory wireless keyless entry keypad. The integrated wired keypad cannot be installed on vehicles not equipped from the factory with a wired keyless entry k

Components: ELECTRICAL SYSTEM · STRUCTURE:BODY · UNKNOWN OR OTHER. Confirm detailed applicability in the original document.

Source record 11029052 at NHTSA
Aug 23, 2025 Other24L05Certain 2011-2022 Model Year Super Duty Vehicles Equipped with 6.7L Engine - Emission Control Information Label Update for Qualified VehiclesNHTSA ID 11022355

Certain 2011-2022 Model Year Super Duty Vehicles Equipped with 6.7L Engine - Emission Control Information Label Update for Qualified Vehicles

Components: ENGINE · UNKNOWN OR OTHER. Confirm detailed applicability in the original document.

Source record 11022355 at NHTSA
Oct 10, 2024 Service Bulletin/Repair InstructionsSSM 53040While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions. While performing a transmission repair on some 2012-2024 Ford an…NHTSA ID 11008948

While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions. While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions.

Components: UNKNOWN OR OTHER. Confirm detailed applicability in the original document.

Source record 11008948 at NHTSA
Apr 24, 2024 Service Bulletin/Repair InstructionsSSM 52476All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles own…NHTSA ID 10254138

All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.

Components: EQUIPMENT. Confirm detailed applicability in the original document.

Source record 10254138 at NHTSA
Jan 18, 2024 Service Bulletin/Repair InstructionsSSM 521882024 F-Super Duty vehicles are equipped with XL-22 (WSS-M2C184-A1) high temperature power steering fluid that looks like clear hydraulic fluid. This fluid is an improvement in high temperature and thermal oxidative stability co…NHTSA ID 10249175

2024 F-Super Duty vehicles are equipped with XL-22 (WSS-M2C184-A1) high temperature power steering fluid that looks like clear hydraulic fluid. This fluid is an improvement in high temperature and thermal oxidative stability compared to Mercon LV. This power steering fluid is also compatible and highly recommended to use when filling or topping off power steering systems of all 2012-2023 F-Super Duty vehicles originally equipped with Mercon LV.

Components: STEERING. Confirm detailed applicability in the original document.

Source record 10249175 at NHTSA
Jan 11, 2024 Service Bulletin/Repair Instructions22N14 S1Certain 2011-2012 Model Year F-Series Super Duty Vehicles Equipped with a 6.7L Diesel Engine State Inspection and Maintenance Test Failure Due to DTCs P2073 and/or P2074 Adding owner letter and corrected dealer bulletin. First …NHTSA ID 10249483

Certain 2011-2012 Model Year F-Series Super Duty Vehicles Equipped with a 6.7L Diesel Engine State Inspection and Maintenance Test Failure Due to DTCs P2073 and/or P2074 Adding owner letter and corrected dealer bulletin. First Part submitted 11/01/23

Components: ENGINE · UNKNOWN OR OTHER. Confirm detailed applicability in the original document.

Source record 10249483 at NHTSA
Dec 13, 2023 Service Bulletin/Repair Instructions23B63Certain 2011-2012 Model Year F-Series Super Duty Vehicles Equipped with 6.7L Diesel Engine State Inspection and Maintenance Testing Failure Due to DTCs P2073 and/or P2074NHTSA ID 10248068

Certain 2011-2012 Model Year F-Series Super Duty Vehicles Equipped with 6.7L Diesel Engine State Inspection and Maintenance Testing Failure Due to DTCs P2073 and/or P2074

Components: BACK OVER PREVENTION · POWER TRAIN:MANUAL TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Confirm detailed applicability in the original document.

Source record 10248068 at NHTSA
Oct 24, 2023 Service Bulletin/Repair Instructions22N14 S1Customer Satisfaction Program 22N14 – Supplement #1 Certain 2011-2012 Model Year F-Series Super Duty Vehicles Equipped with a 6.7L Diesel Engine - State Inspection and Maintenance Test Failure Due to DTCs P2073 and/or P2074NHTSA ID 10244684

Customer Satisfaction Program 22N14 – Supplement #1 Certain 2011-2012 Model Year F-Series Super Duty Vehicles Equipped with a 6.7L Diesel Engine - State Inspection and Maintenance Test Failure Due to DTCs P2073 and/or P2074

Components: BACK OVER PREVENTION:SOFTWARE · POWER TRAIN. Confirm detailed applicability in the original document.

Source record 10244684 at NHTSA
Jun 8, 2023 Service Bulletin/Repair InstructionsSSM 516912011-2023 F-Super Duty and 2016-2024 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit an elevated idle condition. During prolonged idle time, vehicles may experience this elevated idle to reduce unburned hydrocarbon…NHTSA ID 10237789

2011-2023 F-Super Duty and 2016-2024 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit an elevated idle condition. During prolonged idle time, vehicles may experience this elevated idle to reduce unburned hydrocarbons from the SCR. The powertrain control module estimates hydrocarbon levels in the SCR and may increase idle speed to remove them. Idle speed will be increased to 1000 RPM for ambient temperatures near 26°C (80°F) and may increase to 1200 RPM at -40 °C (-40°F). Vehicles may exhibit exhaust smoke and diesel exhaust fluid smell during elevated idle condition. Exhaust smoke and smell condition will not affect reliability or durability of the engine. Power take-off (PTO) use and idle set point control will disable elevated speed. It is required that the operator monitor the vehicle and adhere to any Exhaust Filter warning messages.

Components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM · POWER TRAIN. Confirm detailed applicability in the original document.

Source record 10237789 at NHTSA
Apr 4, 2023 Service Bulletin/Repair InstructionsSSM 51536For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identif…NHTSA ID 10235153

For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.

Components: STRUCTURE. Confirm detailed applicability in the original document.

Source record 10235153 at NHTSA
Dec 13, 2022 Service Bulletin/Repair InstructionsSSM 51251Some 2011-2022 F-Super Duty vehicles equipped with a 6.7L diesel engine may exhibit a ticking noise at idle after an engine oil change. It is often referred to as Typewriter Noise because of its similarity to the sound of a mec…NHTSA ID 10228867

Some 2011-2022 F-Super Duty vehicles equipped with a 6.7L diesel engine may exhibit a ticking noise at idle after an engine oil change. It is often referred to as Typewriter Noise because of its similarity to the sound of a mechanical typewriter. When engine temperatures reach 150 °F (65 °C) or higher, (from engine idle up to approximately 1700 RPM's), this noise can typically be heard at the front wheel well and is often isolated to the transmission bell housing or oil pan area. Typewriter Noise is not detrimental to engine function or durability and has no short or long term effects on the engine. Do not attempt repairs to eliminate this noise. This noise is characteristic of the 6.7L diesel engine and will typically cease or diminish significantly within the oil change maintenance interval.

Components: ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.

Source record 10228867 at NHTSA
Sep 8, 2022 Service Bulletin/Repair Instructions22N14Certain 2011-2012 Model Year F-Series Super Duty Vehicles Equipped with a 6.7L Diesel Engine Powertrain Control Module Reprograming for Inspection and Maintenance TestingNHTSA ID 10222521

Certain 2011-2012 Model Year F-Series Super Duty Vehicles Equipped with a 6.7L Diesel Engine Powertrain Control Module Reprograming for Inspection and Maintenance Testing

Components: POWER TRAIN. Confirm detailed applicability in the original document.

Source record 10222521 at NHTSA
Browse all manufacturer records by page

Records below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.

04 / Agency investigations

Official inquiries.

An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.

Opened Jan 13, 2015 ClosedVehicle Commanded Engine ShutdownRQ14005

The Office of Defects Investigation (ODI) opened this RQ to investigate allegations that the scope and remedy of safety recall 13V-535 were inadequate. Recall 13V-535 was limited to a relatively small population of Ambulance Package vehicles and ODI received complaints of pickup trucks and Fire Engine Prep Package vehicles being affected by the same defect. Ford manufactured approximately 555,985 subject vehicles between February 22, 2010 and January 30, 2015 that may be affected by defective EGT sensors and Powertrain Control Module (PCM) software calibration. The subject vehicles are equipped with four (4) EGT sensors to monitor engine operating conditions. An EGT sensor fault may produce false exhaust over-temperature signals. If these signals are produced, the Powertrain Control Module (PCM) implements a Failure Management Effects Mode (FMEM) and the driver receives a Stop Safely Now (SSN) system warning on the instrument cluster message center. The FMEM triggers a 70% reduction in available engine power over a period of no more than 45 seconds, during which it may not be possible to accelerate or maintain vehicle speed. The PCM then commands the engine to shut down when vehicle speed reaches approximately 1 mph. There is no immediate restart capability. Depending on the PCM software calibration, ignition key position and ambient temperature conditions, the engine may not restart until the end of a 10-60 minute cool down period.Ford and its component supplier(s) made numerous changes to the PCM software calibration and the design, material and manufacture of the EGT sensors over the period of subject vehicle production. This continuous product improvement affected vehicle performance regarding the alleged defect. Ford acknowledges the defect condition in the subject vehicles but argues that an unreasonable risk to motor vehicle safety is limited to Ambulance Package and Fire Engine Prep Package vehicles where commanded shutdown could impact emergency response and patient care. Ford also argues that the defect trend is in decline. Ford also initiated a new safety recall (15V-175) to address the 13V-535 remedy concerns in the Ambulance Package vehicles and Fire Engine Prep Package vehicles. The 15V-175 remedy reprograms the PCM with a new software calibration that stops a single EGT sensor fault to cause the vehicle to enter the FMEM shutdown mode.Ford also initiated an EPA emissions recall (14E03) for all subject vehicles that reprograms the PCM with the software calibration employed in safety recall 15V-175. Finally, Ford initiated a Customer Satisfaction Program (15M01) providing extended warranty coverage of 8 years or 80,000 miles for the the EGT sensors on certain MY2011-2012 subject vehicles.Due to the EPA emissions recall, that had a 66.6% completion rate in Ford's December 2015 progress report to the EPA, the defect trend is in decline. ODI is not aware of any crashes, deaths or injuries related to the alleged defect.ODI believes the alleged defect poses a safety risk but notes that the EPA emissions recall is addressing the safety problem.Compelling issuance of a duplicate recall would not represent a wise use of agency resources.Accordingly, this Recall Query is closed.This action is not a finding that no defect exists and NHTSA will take further action if such action is warranted.

Recorded closure: Mar 15, 2016

Campaign reference in the source: 15V175000

Find investigation RQ14005

Your next step

Take good questions
to the inspection.

Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.