2024 Ford F-150 Manufacturer communications & TSBs.Page 3
Original record summaries, dates and identifiers for this model-year. Records 201–289 of 289, ordered newest first. Dated records on this page: Nov 15, 2023–Sep 27, 2024.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Sep 27, 2024Service Bulletin/Repair Instructions
SSM 52980
NHTSA communication ID: 11008222
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some of the following vehicles may exhibit one passive key that is unable to start the vehicle or activate the passive entry feature; however, all remote keyless entry (RKE) physical button functionality works correctly and the second passive key will have full/correct functionality (including being able to start the vehicle):
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2024 Explorer/Aviator/Corsair, 2021-2024 F-150/Bronco, 2023-2024 F-Super Duty, and 2024-2025 Nautilus vehicles may experience the overhead console sunglass bin cannot be locked in a closed position.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 F-150 vehicles equipped with a 3.5L PowerBoost engine, may exhibit a "12V Battery State of Charge Low" or "Charging System Service Soon" Message displayed in the IPC and/or "Remote Features Disabled To Preserve Battery" in FordPass. Some vehicles may also exhibit DTC B11D9:09 and a Sync Screen message of "System Off To Save Battery".
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 24-2227 to update the labor operation number. Some 2022-2024 F-150 vehicles built on 23-Aug-2022 and through 29-Mar-2024 equipped with a 5.0L engine may exhibit an oil leak from the oil filter adaptor to engine block mounting area. This may be due to block porosity just below the oil filter adapter near the main bearing cap outer bolt
NHTSA source summary · Original PDF not reviewed by Recallfolio
Quality improvements include: -Trailer Maintenance Menu will appear on the Towing Menu and User will be able to enable and disable Trailer Maintenance Reminders. - Charge assist / Public Charging is available by default application to customer. - Customer will be able to use the Charge Assist application at all times to find the public charging locations.
Campaign / software reference: 24-OTA SU 10.1.0 F-150
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2024 Model Year F-150 Vehicles Equipped With A 2.7L Engine - Powertrain Control Module (PCM) Reprogram and Air Conditioning Compressor Inspection
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2024 Model Year F-150 Vehicles Brake Tube Alignment and Clip Inspection In some of the affected vehicles, the EBB brake tubes may be incorrectly routed and/or not securely clipped in place. As a result, the clip’s secondary latch could not be closed. This condition does not affect how the vehicle drives or performs; however, upon internal inspection of the brake lines the customer may notice disorderly brake line routing, two brake tubes close to or touching each other, or one brake line not properly seated in the clip
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2022-2024 Model Year F-150 BEV Vehicles Equipped with Front Park Aid Feature (Minor Feature Code HNLAB) Inoperative Front Parking Sensors - Software Update – Image Processing Module A
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 vehicles built on or before 08-Aug-2024 and equipped with a 3.5L PowerBoost engine may exhibit an illuminated MIL with DTC P144B stored in the powertrain control module (PCM). This may be due to the software level of the PCM. To correct this condition, follow the Service Procedure to reprogram the PCM to the latest software level via the Ford Diagnosis and Repair System (FDRS).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 Lariat/XLT/XL trim level vehicles equipped with a 3.5L PowerBoost engine may exhibit a condition where the right side turbocharger will enter an overspeed condition, causing turbocharger damage and may exhibit an illuminated malfunction indicator lamp (MIL) with DTC P0299:00 stored in the powertrain control module (PCM). This may be due to the upper air deflector deforming and restricting the intake air to the turbocharger. To correct this condition, follow the Service Procedure to replace the upper air deflector.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 non-Lightning vehicles equipped with BlueCruise may exhibit a subtle back and forth movement of the steering wheel with the BlueCruise feature and/or lane centering feature active.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-Super Duty/F-150 vehicles may exhibit a concern where the vehicle's center display screen gets stuck in a reboot loop of the Ford logo and eventually goes black. This may be due to a concern with the software on the telematics control unit module (TCU). To correct the condition, follow the Service Procedure to reprogram the TCU and then perform a battery disconnect to make sure the accessory protocol interface module (APIM) receives the correct date from TCU.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 F-150 non-Lightning vehicles may exhibit a condition where the SelectShift®/SelectShift transmission will downshift to a lower gear when in drive (D) and shifting to a higher gear will be unavailable in the IPC. Downshifting may continue, when safe entry conditions are met for each gear, and the IPC display will show the available gears counting down one by one as the vehicles' speed and engine rpm decreases. This may be due to a chafed wire harness in the SelectShift® +/- circuit. To correct the condition, follow the Service Procedure to repair the circuit.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 24-2087 to update the vehicle lines, model years affected, action and service procedure. Some 2021-2024 Mustang Mach-E/F-150, 2022-2024 F-150 Lightning/Expedition/Navigator, 2023-2024 Corsair vehicles may exhibit an inoperative BlueCruise and lane centering with DTCs U2018:51 stored in the camera module - rear (CMR) and U0565:86 stored in the image processing module A (IPMA) without DTC U3000:49 stored in the CMR. This may be due to the software level of the CMR. To correct the condition, follow the Service Procedure to reprogram the CMR module using the latest software level of the Ford Diagnosis and Repair System (FDRS).
Source components: FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL · LANE DEPARTURE: ASSIST.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 vehicles built on or before 14-May-2024 equipped with a 3.5L PowerBoost may exhibit an illuminated MIL with DTC P2C90 stored in the powertrain control module (PCM). To correct this condition, perform the Service Procedure to to inspect the positive crankcase ventilation (PCV) system and reprogram the PCM to the latest software level via the Ford Diagnosis and Repair System (FDRS).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 vehicles may exhibit diagnostic trouble code (DTC) U211B:87 in the headlamp control module (HCM) when a diagnostic self-test is performed.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Quality Improvement include: -Update to Enhanced Central Gateway (ECG) module software to prevent battery draining when vehicle is parked. - Corrects Sync screen to display correct software update status - Addresses potential vehicle no start after OTA update.
Campaign / software reference: 24-OTA SU ECG-24.2.5.6.2 F-150
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2024 Model Year F-150, F-150 Lightning, F-150 Raptor, 2024 Ranger, 2024 Ranger Raptor Enhanced Pre-Delivery Inspection (PDI) Vehicles in this Update Before Sale program were selected for an enhanced pre-delivery inspection due to Ford's continued focus on launch quality. Reason for supplement: updated tech instructions
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2024 Escape/Explorer, 2021-2024 F-150, 2022-2024 Maverick and 2024 Nautilus vehicles equipped with a full hybrid electric vehicle (FHEV) powertrain may exhibit a cable connection error screen from the Midtronics xRC-3363 High Voltage Battery Rescue Charger. The xRC-3363 will prompt the technician to verify the low voltage connections when no actual fault is present. This may be due to the software level of the Midtronics xRC-3363 High Voltage Battery Rescue Charger.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2023-2024 F-150/Escape/Explorer/Maverick and 2024 Nautilus vehicles equipped with a full hybrid electric vehicle (FHEV) powertrain may exhibit diagnostic trouble codes (DTCs) P0A7D and/or P0DE6 and the vehicle identification number (VIN) is not recognized by the Midtronics xRC-3363 High Voltage Battery Rescue Charger. This may be due to the software level of the Midtronics xRC-3363 High Voltage Battery Rescue Charger.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2024 F-150, 2021-2024 Bronco, and 2024 Ranger vehicles equipped with a 2.7L or 3.0L EcoBoost engine may exhibit a ticking/tapping or rattle type noise from the top front cover area of the engine on initial start-up after a cold soak of 6 hours or more that may last for 2-5 seconds. This may be due to a stuck internal component of the variable cam timing (VCT) unit.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 24-2166 to update the parts list. Some 2022-2024 F-150 vehicles built on 23-Aug-2022 and through 29-Mar-2024 equipped with a 5.0L engine may exhibit an oil leak from the oil filter adaptor to engine block mounting area. This may be due to block porosity just below the oil filter adapter near the main bearing cap outer bolt. To correct the condition, follow the Service Procedure to inspect the engine block for a porosity leak.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 vehicles equipped with console shift may exhibit a clicking sound coming from the shifter after it is placed and kept in the reverse, neutral or drive positions. This may be due to the software in the gear shift module (GSM). To correct this concern, reprogram the GSM using the latest software level of the Ford Diagnosis and Repair System (FDRS) diagnostic scan tool.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 Bronco/F-150 (non-Lightning) vehicles may exhibit a "Check Charging System" message in the instrument panel cluster (IPC) while the charging system is fully operational and there are no diagnostic trouble codes (DTC) stored related to the charging system. This may be due to the customer using an aftermarket programmer to change body control module (BCM) configuration.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 vehicles may exhibit inoperative power exterior mirror glass adjustment with diagnostic trouble codes (DTCs) B1C09:11 and B1C10:11 in the driver's door module (DDM) or B1C11:11 and B1C12:11 in the passenger's door module (PDM). This may be due to module software logic responding to repetitive mirror switch input toggled up/down or left/right too quickly.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2023-2024 F-Super Duty and 2024 F-150/Nautilus vehicles may set DTC U211B:51 in the telematics control unit (TCU) module after a software update on the TCU is performed at dealer or via over the air (OTA) Update. The DTC U211B:51 in the TCU has no effect on vehicle functionality or connectivity. Replacement or reprogramming of the TCU will not resolve this condition. DTC U211B:51 should be ignored if no other DTCs are present in the TCU and no symptoms present. No further service action is required.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2024 Model Year F-150 Vehicles Equipped With A 2.7L Engine - Powertrain Control Module (PCM) Reprogram and Air Conditioning Compressor Inspection In all of the affected vehicles, due to a certain PCM calibration error, air conditioning (A/C) compressor damage may result under high speed and high load operations. Customers will experience a loss of A/C cooling in the vehicle in the event of a compressor failure. There are no cluster messages or warning lights to signal this malfunction.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 non-Lightning vehicles built on or before 03-Jun-2024 may exhibit diagnostic trouble code (DTC) B15F0:15 in the image processing module A (IPMA) when a diagnostic self-test is performed. This may be due to an IPMA communication error within a specified timeframe.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 non-Lightning vehicles may exhibit modules on the high-speed controller area network 3 (HS-CAN3), medium-speed controller area network 1 (MS-CAN1), medium-speed controller area network 2 (MS-CAN2), and/or the flexible data rate controller area network 2 (FD-CAN2) not responding to the Ford Diagnosis and Repair System (FDRS) and the modules on these networks fail the network test without any diagnostic trouble codes (DTCs) tied to the affected modules. The modules on the flexible data rate controller area network 2 (FD-CAN1) and the high-speed controller area network 1 (HS-CAN1) will communicate with the FDRS. Vehicles equipped with a power opening/closing tailgate may also exhibit an intermittent inoperative power tailgate. This may be due to the gateway module A (GWM) not being configured properly. To correct this condition, download and run the GWM - Gateway Module A (GWM) Configuration application using the latest version of the FDRS. For claiming, use causal part number 14G490 and applicable labor times from Section 10 of the Service Labor Times Standard (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 non-Lightning vehicles may exhibit passive entry feature inoperative on all doors and/or "No Key Detected" message in the IPC, even though the 12V battery state of charge (SOC) is over 50% and no diagnostic trouble codes (DTCs) are stored in the BCM. This may be due to the software level of the body control module (BCM). To correct this condition, follow the Service Procedure to reprogram the BCM using the latest software version of the Ford Diagnosis and Repair System (FDRS) scan tool.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 Lightning vehicles may set diagnostic trouble code (DTC) B15F0:15 in the image processing module A (IPMA) when a diagnostic self-test is performed. This may be due to an IPMA communication error within a specified timeframe. DTC B15F0:15 does not affect vehicle durability with no effect on vehicle operation and no additional diagnosis or service is required for this condition at this time. Replacement or reprogramming of the IPMA will not resolve this condition. Inform customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition and will be released over-the-air (OTA) expected in Q4 2024. Software will update automatically if vehicle connectivity is enabled in the vehicle's settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update by December 2024.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 F-150/Bronco and 2023-2024 Escape/F-Super Duty vehicles built with SYNC 4 require a connected phone with Android Auto or Apple CarPlay active to enable voice interactions and use of the steering wheel voice control button. This is due to the affected vehicles not having built in voice interactions capability. Vehicles with built in voice interaction capability can be identified as also being equipped with the built in connected navigation feature which includes a navigation tab on the center display screen. Diagnostics should only be performed for voice interactions on vehicles equipped with built in voice interaction capability or with Android Auto or Apple CarPlay active.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 F-150 non-Raptor vehicles equipped with 4WD and ESOF transfer case (minor feature code FMLAS) may exhibit an intermittent grinding/hum/rumble noise from the front wheel area while in 2WD that goes away when the vehicle is put into 4WD. These vehicles will also have no diagnostic trouble codes (DTCs) stored in the transfer case control module (TCCM). To confirm a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS). This may be due to incomplete disengagement of the integrated wheel end (IWE) actuator assemblies. To correct this condition, follow the Service Procedure to replace IWE actuator assemblies
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2024 Model Year F-150 Super Cab STX Vehicles Equipped with Black Appearance Package Installation Of Missing Running Boards In all of the affected vehicles, customers paid for the F-150 STX Black Appearance Vehicle Package per the Monroney Label (window sticker) that should had included the 6” (inch) Black Running Boards. However, both driver and passenger running boards were not installed during the manufacturing process
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2024 Escape/Corsair, 2021-2024 Bronco Sport/F-150, and 2022-2024 Maverick vehicles may exhibit a condition where the door(s) do not open using the exterior door handle(s). This may be due to an enabled door reinforcement inertia lock within the exterior door handle. This condition occurs when the doors are closed or opened with excessive force. To correct this condition, follow the door reinforcement inertia lock rest procedure that has been added to Section 501-14 of the Workshop Manual under General Procedures. For claiming, use causal part 78219A64.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Certain 2024 Model Year F150 HEV 3.5L Vehicles HEV Cylinder Misfire Detection In some of the affected vehicles, the vehicle’s Misfire Monitor falsely detects a misfire. The Malfunction Indicator Light (MIL) will illuminate if this concern is present. There is no known impact to drivability and the MIL may clear if the Misfire Monitor stops falsely detecting misfires
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 vehicles built on or before 14-May-2024 equipped with a 3.5L PowerBoost may exhibit an illuminated MIL and set cylinder misfire DTCs P0300, P0316, P0301, P0302, P0302, P0304, P0305 and/or P0306. This may be due to the software level of the powertrain control module (PCM). To correct this condition, perform the Service Procedure to reprogram the PCM to the latest software level via the Ford Diagnosis and Repair System (FDRS).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 F-150 and 2023-2024 Expedition/Navigator vehicles equipped with a 3.5L EcoBoost engine may exhibit a rattle/scraping noise from the bellhousing area on start-up. This may be due to the torque converter studs contacting the engine-to-transmission spacer plate (separator plate). To correct this condition, remove the transmission and flexplate and inspect the engine-to-transmission spacer plate and torque converter studs for wear/damage. If wear/damage is found, replace the engine-to-transmission spacer plate. Refer to Workshop Manual (WSM) Section 303-01 Engine - 3.5L EcoBoost (BM), Removal and Installation, Crankshaft Rear Seal. When reinstalling the starter motor, make sure the starter is flush with the engine-to-transmission spacer plate prior to tightening the studbolts. Failure to do so may result in damaging the newly installed engine-to-transmission spacer plate.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 F-150 non-Lightning vehicles may exhibit turn signal indicators on the instrument panel cluster (IPC) flashing fast when activated after running the IPC - Towbar Configuration application using the Ford Diagnosis and Repair System (FDRS) scan tool without any exterior turn signals being inoperative. The exterior turn signals will function normally. The IPC - Towbar Configuration application has recently been updated to correct this issue. To correct this condition, download and rerun the latest version of the IPC - Towbar Configuration application using the latest software level of the FDRS scan tool.
Source components: ELECTRICAL SYSTEM · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Quality improvements include: -Robustness action to improve connectivity functionality of Google Automotive Services. -Pre theft alerts notification via Ford Pass is updated. -Robustness action to prevents TCU from providing bad Uinversal Time Clock Time/Date to Sync.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2023-2024 F-150 non-hybrid/non-Lightning vehicles built on or after 01-Mar-2023 may exhibit an illuminated battery malfunction indicator and/or illuminated ABS malfunction indicator which may be accompanied by a Check Brake System message and/or 12V Battery State Of Charge Low message in the instrument panel cluster (IPC) with diagnostic trouble code (DTC) U3003:16 stored in the ABS module. This may be due to the state of charge of the battery. The Workshop Manual (WSM) has recently been updated with improved diagnostics for this condition. Refer to the WSM, Section 206-09 Anti-Lock Brake System (ABS) and Stability Control, Diagnosis and Testing, Anti-Lock Brake System (ABS) and Stability Control - Electric, Pinpoint Tests, Pinpoint Test A: ABS Voltage Supply Concerns for applicable diagnostics.
Source components: ELECTRICAL SYSTEM · SERVICE BRAKES.
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This article includes information on warranty, technical service tips and other service information
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles equipped with SYNC4 may exhibit one or more of the following symptoms after all currently available accessory protocol interface module (APIM) software updates have been performed. - General system performance, stability, and intermittent system reboots. - Intermittent Wireless CarPlay or Android Auto function. - Phone related concerns with intermittent No Audio or Static. - Navigation/global positioning system (GPS) related concerns through CarPlay and Android Auto. - Alexa function consistency and stability. These symptoms may be due to the software in the APIM. Replacing the APIM will not resolve these symptoms for the customer. Before returning the vehicle to the customer, review the procedures within Workshop Manual, Section 415-00 and ensure the latest APIM software is installed. Refer to General Service Bulletin (GSB) 23-7146 for help determining the latest available level of software. IMPORTANT: some module software updates will only display as available on Ford Diagnosis and Repair System (FDRS) after prerequisite modules are updated. This may require the technician to update certain modules multiple times during the service visit, before the latest APIM software is accessible in FDRS. If symptoms continue after latest APIM software has been installed, inform customers that Ford is working on additional software enhancements which are expected to be delivered over-the-air (OTA) by Q4 2024 on F-150, F-150 Lightning, Mustang Mach-E, Mustang, Escape, Corsair, Expedition, Navigator, Bronco, Mustang, and 2023-2024 F-Super Duty. Software will update automatically if vehicle connectivity is enabled in the vehicle's settings. For all other vehicles with SYNC4, schedule a service visit for customers in October 2024, when the updated APIM software is expected to be available to dealers. Monitor OASIS for additional information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 24-2054 to add 2024 models and update the production fix date. Some 2022-2024 F-150 vehicles built on 23-Aug-2022 and through 29-Mar-2024 equipped with a 5.0L engine may exhibit an oil leak from the oil filter adaptor to engine block mounting area. This may be due to block porosity just below the oil filter adapter near the main bearing cap outer bolt. To correct the condition, follow the Service Procedure to inspect the engine block for a porosity leak.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 Lightning vehicles placed in emergency tow state may exhibit a missing pop-up message from the instrument panel cluster (IPC) during early vehicle re-entry with the key in the OFF position. If the vehicle has not fully entered sleep mode or locked, entry through any door within 10-30 minutes may not induce pop-up message visibility when the key is still in the OFF position. Changing the ignition key state to ON will result in a visible emergency tow pop-up message in the IPC. This may be due to the IPC software. Replacement or reprogramming of the IPC will not resolve this condition. Inform customers that engineering is currently working on a solution for this condition and will be released via a software update delivered over-the-air (OTA) expected in Q4 2024. Software will update automatically if vehicle connectivity is enabled in the vehicle's settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in Q4 2024. Monitor OASIS for additional information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Various vehicles equiped with 10R80/10R80 MHT/10R100/10R140 transmissions may require replacement of the seal kits (7153) when internal repairs are being performed. These kits come with 4 wheel drive (4WD) seals and will no longer include the 2WD seals. When working on a 2WD vehicle, any 2WD seals must be ordered separately. Refer to the parts catalog for the proper 2WD seals required.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 F-150-3.5L FHEV, 2020-2024 Explorer 3.3L FHEV, 2020-2024 Escape 2.5L FHEV, and 2022-2024 Maverick 2.5L FHEV vehicles may exhibit an illuminated MIL with DTC P237F and/or P2C23 stored in the powertrain control module (PCM) and no affect on drivability. This may be due to seal damage, corrosion and/or water intrusion in the exhaust coolant temperature (ECT) sensors 3 and/or 4 connector. Visual inspection should be completed on ECT3 and ECT4 sensors and mating connections for seal damage, water intrusion, and corrosion. If seal damage, water intrusion or corrosion is present, repair per cell 5 of the Wiring Diagram, then apply Motorcraft® XG-12 Electrical Grease to the female/vehicle side of the harness. This inspection of ECT3 and ECT4 sensors should be completed prior to starting the appropriate pinpoint test in Section 303-03 of the Workshop Manual (WSM). If DTCs P237F and/or P2C23 do not return, no further action is necessary and the replacement of the entire exhaust heat exchanger assembly is not required. If P237F and/or P2C23 returns, follow the pinpoint test in Section 303-03 of the WSM for further diagnostics.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 vehicles equipped with a gasoline, hybrid or flex fuel engine (non-Lightning) may exhibit inoperative A/C, lack of air flow and/or evidence of the evaporator freezing. This may be due to the software level of the heating, ventilation and air conditioning (HVAC) module. Reprogram the HVAC module using the latest software level of the FDRS diagnostic scan tool. Follow all on-screen instructions carefully to complete all coordinated module software updates. For claiming, use causal part RECAL and use applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2019 Explorer and 2018-2024 Transit/F-150/Expedition/Navigator vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P0627, P025A, P025B, P00C6, P008A and/or U0109 stored in the powertrain control module (PCM). Diagnosis should include checking for an intermittent or partial disconnect of the harness to the fuel pump control module (FPCM) connector, connector pin push-outs, damaged pins/terminals, or loose/corroded grounds. Confirm FPCM connector (Explorer - C3239, Transit - C433, F-150 - C460/C4336, Expedition/Navigator - C433/C4033) is fully seated and inspect applicable grounds (Explorer G302, Transit - G401, F-150 - G401, Expedition/Navigator - G403/G406) prior to performing guided diagnostics or replacing any components.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 non-Lightning vehicles equipped with minor feature codes C2BAW and FDDAA may exhibit an intermittent Trailer Brake System Fault See Manual message in the instrument panel cluster (IPC), inoperative trailer brake controller, and/or diagnostic trouble codes (DTCs) U0131:87, U0140:87, U0100:87 and/or U0121:87 stored in the trailer module (TRM) when installing the trailer brake controller kit ML3Z-19H332-AB. To confirm a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS). Trailer brake controller kit ML3Z-19H332-AB does not include the correct TRM for 2024 F-150 vehicles, and this kit should not be installed on 2024 F-150 vehicles.
NHTSA source summary · Original PDF not reviewed by Recallfolio
All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 F-150 vehicles may exhibit a side door ajar and/or a hood ajar warning message displayed in the instrument panel cluster (IPC) with or without diagnostic trouble codes (DTC) P166B, B1175, B1176, B11C1 and/or B11C0. This may be due to a misalignment of the the door or hood and/or their strikers. Before attempting any component diagnosis or replacement, check the door and/or hood and their strikers for proper alignment. Refer to Workshop Manual (WSM), Section 501-03 alignment procedures. If the doors and hood are properly aligned, continue with normal diagnostics.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2024 F-150 and 2021-2024 Bronco vehicles equipped with a 2.7L or 3.0L EcoBoost engine may exhibit a ticking/tapping or rattle type noise from the top front cover area of the engine on initial start-up after a cold soak of 6 hours or more that may last for 2-5 seconds. This may be due to a stuck internal component of the variable cam timing (VCT) unit. To correct the condition, replace all 4 of the VCT units following Workshop Manual (WSM), Section 303-01. For claiming, use causal part 6C525 and applicable labor operations in Section 6 of the Service Labor Time Standards (SLTS) Manual. If labor times are not available, claim M-time.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Various vehicles have had pinpoint tests, guided routines and the Warranty and Policy Manual recentlyupdated for diagnostics and repairs on SYNC generation 3 and later applications. When performingdiagnostics and repairs on SYNC Gen 3 or later, select the diagnostics tab and search for related symptoms,DTCs and keywords. The search results will be shown in the search results pane. Read and follow allTechnical Service Bulletins (TSB), Special Service Message (SSM)s or General Service Bulletin (GSB) first if abulletin specifically addresses the vehicle concern. If there are no messages, run the appropriate diagnosticpinpoint test found in the Workshop Manual (WSM). Follow the steps in the pinpoint test. Make sure to note thetitle of the guided routine, using the correct one for the vehicle's symptom or diagnostic trouble code (DTC) iscritical. Depending on the outcome of the pinpoint test, a repair validation code (RVC) may be generated eitherin the pinpoint test or Guided Routine. If the vehicle concern still exists after following the pinpoint tests orguided routine, then a manual RVC can be generated using the RVC Assist Form. A manual RVC can only begenerated once the above process has been followed.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 vehicles may exhibit inoperative exterior mirror glass adjustment with diagnostic trouble codes (DTCs) B1C09:11 and B1C10:11 in the driver's door module (DDM) or B1C11:11 and B1C12:11 in the passenger's door module (PDM). This may be due to module software logic responding to repetitive mirror switch input toggled up/down or left/right too quickly. As an interim action, DDM/PDM functionality will resume after a sleep/wake cycle of approximately 15 minutes with the doors locked and the key in the OFF position. Inoperative outside mirror glass adjustment with DTCs B1C09:11 and B1C10:11 in the DDM or B1C11:11 and B1C12:11 in the PDM does not affect vehicle durability and no additional diagnosis or service is required for this condition at this time. Inform customers that they can continue to drive the vehicle and a solution for this condition is expected in Q3 2024. Replacement or reprogramming of the DDM/PDM will not resolve this condition. Monitor OASIS for additional information and schedule service appointments for customers once the repair becomes available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2023-2024 F-150 and 2024 Bronco/Transit vehicles may exhibit Apple Carplay Bluetooth connectivity concerns. This may be due to the accessory protocol interface module (APIM) software. To correct this concern, perform a soft reset by pressing the Power and Seek Foward buttons for 5 seconds, or use the SYNC Module Reset function of the Ford Diagnosis and Repair System (FDRS). For claiming, use causal part 14G670 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 vehicles may exhibit no audio output when using Spotify. Audio output may recover with a key cycle. This may be due to the accessory protocol interface module (APIM) software. Replacement or reprogramming of the APIM will not resolve this condition. Inform customers that engineering is currently working on a solution for this condition and will be released via Ford Power-Up software updates delivered over-the-air (OTA) expected in Q3 2024. Software will update automatically if vehicle connectivity is enabled in the vehicle's settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in Q3 2024. Monitor OASIS for additional information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022-2024 various Ford/Lincoln vehicles equipped with SYNC 4 may experience concern where customers are receiving an error message when trying to enroll in connected services. This may be due to the gateway module (GWM) software. To correct the concern, download and run the Transport and Factory Mode Deactivation app: under HS1 modules select BCM > Transport and Factory Mode > Download > Run. When the pop-up message appears for Change Vehicle Mode - Transport/Factory/Normal Mode, press OK. This will proceed to the Transport and Factory Mode Deactivation screen, select Unlock Vehicle Connectivity Settings (21 MY + Vehicles). A pop-up message appears noting Vehicle Is Now In Normal Mode, select OK. This will return to the Transport and Factory Mode Deactivation screen, select Exit. A final pop-up notification stating that the application is finished, select OK. For claiming, use causal part 14G490 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 vehicles may exhibit no audio output when using Spotify. Audio output may recover with a key cycle. This may be due to the accessory protocol interface module (APIM) software. Replacement or reprogramming of the APIM will not resolve this condition. Inform customers that engineering is currently working on a solution for this condition and will be released via Ford Power-Up software updates delivered over-the-air (OTA) expected in Q3 2024. Software will update automatically if vehicle connectivity is enabled in the vehicle's settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in Q3 2024. Monitor OASIS for additional information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
For 2015-2024 Ford and Lincoln vehicles equipped with turbocharged engines and customer concern of an engine oil leak, refer to Workshop Manual (WSM), Section 303-00 for oil leak inspection and testing methods. Ford has evaluated turbochargers replaced for oil leak symptoms and although oil may collect on the external surface of a turbocharger, it is extremely rare for a turbocharger assembly to be the root cause of the oil leak. Careful inspection of the turbocharger oil feed and drain tubes should be performed along with the recommended WSM procedures as needed. Warranty claims for turbocharger replacement going forward will be assessed.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 Bronco/F-150, 2023-2024 Escape/F-Super Duty vehicles equipped with SYNC 4 may experience a concern during accessory protocol interface module (APIM) programming where the vehicle's center display screen indicates USB Error. This may be due to a lack of memory space available to perform the APIM software update. If it is a memory concern, the Ford Diagnosis and Repair System (FDRS) will provide an option to delete the voice application. Re-enter the module programming and when prompted, do not select first option - SYNC Module (APIM) Software Update, select the second option - Delete Voice Application(s) From Module. Once deleted, run the SYNC Module (APIM) Software Update as directed, this will update the software and automatically reload the voice app. If the voice delete option is not available, continue with normal diagnostics in the Workshop Manual, Section 418.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 vehicles may exhibit an intermittent pop up message on the center display screen stating Pro Power Onboard is not available. This may be due to the accessory protocol interface module (APIM) software. Replacement or reprogramming of the APIM will not resolve this condition. Inform customers that engineering is currently working on a solution for this condition and will be released via Ford Power-Up software updates delivered over-the-air (OTA) expected in Q3 2024. Software will update automatically if vehicle connectivity is enabled in the vehicle's settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in Q3 2024. Monitor OASIS for additional information.
Source components: EQUIPMENT:ELECTRICAL:INFOTAINMENT:BLUETOOTH/WIFI · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 vehicles may set diagnostic trouble code (DTC) U211B:87 in the headlamp control module (HCM) when a diagnostic self-test is performed. This may be due to a HCM communication error within a specified timeframe. DTC U211B:87 does not affect vehicle durability with no effect on vehicle operation and no additional diagnostics or service is required for this condition at this time. Inform customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected in Q2 2024. Replacement or reprogramming of the HCM will not resolve this condition. Monitor OASIS for additional information and schedule service appointments for customers once the repair becomes available.
Source components: AIR BAGS:SRS MALFUNCTION WARNING LAMP/LIGHT · ELECTRICAL SYSTEM:ADAS:BLINDSPOT:WARNING:LAMP · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 Lightning vehicles equipped with a 12 inch center display and all 2024 F-150 gas engine vehicles may exhibit incorrect illumination of the parking sensor soft button on the vehicle's center display screen. This may be due to the accessory protocol interface module (APIM) software. Replacement or reprogramming of the APIM will not resolve this condition. Inform customers that engineering is currently working on a solution for this condition and will be released via Ford Power-Up software updates delivered over-the-air (OTA) expected in Q3 2024. Software will update automatically if vehicle connectivity is enabled in the vehicle's settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in Q3 2024. Monitor OASIS for additional information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 vehicles equipped with a 3.5L PowerBoost may set incorrect cylinder misfire DTCs while the CSER monitor is active. The CSER monitor runs for approximately 3 minutes after a cold soak start-up. If a misfire occurs while the CSER monitor is running, the powertrain control module (PCM) software strategy may set an incorrect cylinder misfire code. Prior to a repair attempt, allow the vehicle to run for at least 3 minutes and verify any individual cylinder misfire codes by performing a Power Balance Test using the Ford Diagnostic and Repair System (FDRS) scan tool. Engineering is currently working on a solution for this condition and will be released via Ford Power-Up software updates delivered over-the-air (OTA) expected in Q3 2024. Software will update automatically if vehicle connectivity is enabled in the vehicle's settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in Q3 2024. Monitor OASIS for additional information.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM) · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2023 F-Super Duty, 2023-2024 Expedition, 2024 Nautilus/F-150 vehicles will exhibit no light emitting diode (LED) confirmation from the key fob indicating that the vehicle has remote started (or not remote started). Factory key fobs with remote start no longer contain a LED feedback indicator. Do not replace the key fob for this condition. This is a normal operating characteristic and no service action is necessary.
Source components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 vehicles may exhibit non-responsive media streaming requests when utilizing Alexa voice commands. Media selections can still be selected through the center display screen. This may be due to the accessory protocol interface module (APIM) software. Replacement or reprogramming of the APIM will not resolve this condition. Inform customers that engineering is currently working on a solution for this condition and will be released via Ford Power-Up software updates delivered over-the-air (OTA) expected in Q3 2024. Software will update automatically if vehicle connectivity is enabled in the vehicle's settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in Q3 2024. Monitor OASIS for additional information.
Source components: ELECTRICAL SYSTEM:SOFTWARE · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 vehicles may exhibit an inoperative steering wheel voice command button when trying to make a phone call. This may be due to the accessory protocol interface module (APIM) software. Replacement or reprogramming of the APIM will not resolve this condition. Inform customers that engineering is currently working on a solution for this condition and will be released via Ford Power-Up software updates delivered over-the-air (OTA) expected in Q3 2024. Software will update automatically if vehicle connectivity is enabled in the vehicle's settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in Q3 2024. Monitor OASIS for additional information.
Source components: EQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
During service and repair requiring removal and replacement of a crankshaft bolt and/or crankshaft damper, achieving proper torque of the crankshaft pulley bolt is critical. Incorrect torque may allow the bolt to loosen resulting in the timing gear breaking and engine damage. Replacement of the bolt is critical to the repair and accurately following the installation procedure in the Workshop Manual (WSM) Section, 303-01 is extremely important. The bolt torque procedure can be found in the crankshaft front seal removal and installation procedure or in the engine assembly procedure.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 vehicles may exhibit a pop up message stating the Owner's Manual is not available while the vehicle is in motion. A preliminary pop up message will ask if you are the passenger. After selecting Yes I Am The Passenger, the pop stating Not Available still appears in the center display screen and the Owner's Manual cannot be accessed. This may be due to the accessory protocol interface module (APIM) software. Replacement or reprogramming of the APIM will not resolve this condition. Inform customers that engineering is currently working on a solution for this condition and will be released via Ford Power-Up software updates delivered over-the-air (OTA) expected in Q3 2024. Software will update automatically if vehicle connectivity is enabled in the vehicle's settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in Q3 2024. Monitor OASIS for additional information.
Source components: BACK OVER PREVENTION:DISPLAY FUNCTION · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 vehicles may set diagnostic trouble code (DTC) B15F0:15 in the image processing module A (IPMA) when a diagnostic self-test is performed. This may be due to a IPMA communication error within a specified timeframe. DTC B15F0:15 does not affect vehicle durability with no effect on vehicle operation, and no additional diagnosis or service is required for this condition at this time. Inform customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected in Q2 2024. Replacement or reprogramming of the IPMA will not resolve this condition. Monitor OASIS for additional information and schedule service appointments for customers once the repair becomes available.
Source components: COMMUNICATION:MANUFACTURER TELEMATICS · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 Nautilus and F-150 vehicles may incorrectly list the keyless entry keypad code card on the loose item checklist. 2024 Nautilus and F-150 vehicles in North America do not include keyless entry keypad code cards. Clients are now able to retrieve the vehicle's keyless entry keypad master access code in vehicle by following the instructions in the master access code card (available only on F-150) or in the Owners Manual > Keyless Entry Keypad Master Access Code. This process requires the use of two programmed intelligent access keys.
Source components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 vehicles may set diagnostic trouble code (DTC) P0534:00 in the powertrain control module (PCM) when a diagnostic self-test is performed. This may be due to the PCM responding to large changes in ambient temperatures from warm to below freezing when the vehicle has less than 62 miles (100 km) and still in a rapid learn mode for the ambient air temperature logic. The rapid update to the temperature can result in the vehicle setting this DTC. DTC P0534:00 does not affect vehicle drivability and has no effect on vehicle operation. No additional diagnostics or service is required for this condition at this time. DTC P0534:00 is a background diagnostic code for service only and does not illuminate the malfunction indicator lamp (MIL), powertrain malfunction indicator (wrench), or provide any indication to the vehicle operator. Inform customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected in Q2 2024. Replacement or reprogramming of the PCM will not resolve this condition. Monitor OASIS for additional informati
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM) · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Software Update 23-PU0813-DOR-UP2 for 2022-2023 MY F-150 vehicles is now available. Quality Improvements include: - Robustness action to improve the windows and mirror switches loss of functionality.
Source components: BACK OVER PREVENTION:SOFTWARE · ELECTRICAL SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 Mustang Mach-E, 2022-2024 E-Transit/F-150 Lightning vehicles may have diagnostic trouble code (DTC) P1A3C stored in the off-board charger controller module (OBCC). The P1A3C is commonly set due to an interruption of the direct current (DC) fast charging process and should be disregarded. All other DTCs stored in the OBCC are to be addressed using applicable publications and/or normal diagnostics found in Workshop Manual, Section 414-03B.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 Lightning vehicles placed in emergency tow state may exhibit a missing pop-up message from the instrument panel cluster (IPC) during early vehicle re-entry with the key in the OFF position. If the vehicle has not fully entered sleep mode or locked, entry through any door within 10-30 minutes may not induce pop-up message visibility when the key is still in the OFF position. Changing the ignition key state to ON will result in a visible emergency tow pop-up message in the IPC. This may be due to the IPC software. Replacement or reprogramming of the IPC will not resolve this condition. Inform customers that engineering is currently working on a solution for this condition and will be released via Ford Power-Up software updates delivered over-the-air (OTA) expected in Q2 2024. Software will update automatically if vehicle connectivity is enabled in the vehicles settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in Q2 2024. Monitor OASIS for additional information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2023 F-150 equipped with a 3.5L PowerBoost engine built on or after 3-Nov-2023 may exhibit an intermittent no start and Stop Safely Now message displayed in the instrument panel cluster (IPC) and/or diagnostic trouble codes (DTC) U0293 and/or P1A43 in the BECM or in connected vehicle data. A gateway module A (GWM) software concern may be triggering the no start condition. This does not affect vehicle durability and no additional diagnosis or service is required for this condition at this time. Inform customers that the vehicle will start after leaving it off temporarily. Engineering is currently working on a solution for this condition that is expected in March 2024. Monitor OASIS for additional information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 F-150 Lightning vehicles may set diagnostic trouble code (DTC) U0594:68 in the heat pump valve control module (HPVCM) when a diagnostic self-test is performed. This may be due to HPVCM sensitivity while in accessory mode. DTC U0594:68 has no effect on functionality and will automatically become a historical DTC which can be cleared. Replacement or reprogramming of the HPVCM will not resolve this condition. DTC U0594:68 should be ignored if no other DTCs are present in the HPVCM, no warning indicators are illuminated while the vehicle is on, and no symptoms present. No further service action is required.
Source components: ENGINE AND ENGINE COOLING:COOLING SYSTEM:PUMP.
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This artile includes ifnormation on warranty, technical service tips and other service information.
Source components: ELECTRICAL SYSTEM · POWER TRAIN · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Software Update PU-0904-PPO-PRP for 2022-2023 F-150 TREMOR vehicles is now available. Quality improvements include: - Enhance the performance and stability of driver display while towing.