2023 Ford F-150 Manufacturer communications & TSBs.Page 4
Original record summaries, dates and identifiers for this model-year. Records 301–377 of 377, ordered newest first. Dated records on this page: Nov 29, 2022–Sep 29, 2023.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Sep 29, 2023Service Bulletin/Repair Instructions
SU6 P1 F150
NHTSA communication ID: 10243445
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Software Update SU6 P1 for 2021 - 2023 F150 is now available. Quality improvements include: - Digital owner Manual addition (2023MY Only) -Improved ""Ask on Exit"" pop- up functionality - Adds a ""some display features may be temporarily unavailable"" message to the SYNC screen when a SYNC update is installing. - Selectable Drive Modes - prevent default to normal mode due to loss of communication with SYNC - Improved SYNC Display and single toggle addition to disable certain features that will help enhance your towing experience. - Improved instant voice feedback share feature"
Source components: ELECTRICAL SYSTEM:ADAS:DRIVER MONITORING:SOFTWARE · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150 vehicles equipped with a 3.5L PowerBoost engine may exhibit an illuminated powertrain malfunction (wrench) lamp with diagnostic trouble code (DTC) P084B stored in the powertrain control module (PCM)
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2023 Ford and Lincoln vehicles equipped with a 10R60/10R80/10R80 MHT/10R100 transmission may exhibit a whine noise at idle and/or while driving. This may be identified as coming from the bellhousing and the front of the transmission fluid pan. The whine noise may become louder when the transmission is at operating temperature and may increase with engine revolutions per minute (RPM) in the park (P) position. A small amount of whine noise is considered to be characteristic of the 10R60/10R80/10R80 MHT/10R100 transmissions due to the offset gear drivetrain in the front support and has no effect on durability. Use the Report a Vehicle Concern link at the bottom of OASIS to submit a report if there is a customer concern of whine noise describing operating conditions and noise severity.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles equipped with power folding mirrors may exhibit power folding mirrors that are inoperative or exhibit a clicking sound. This may be due to the mirrors being manually folded in, during transportation, going through a car wash, bumped in a parking lot, or found during pre-delivery inspection (PDI). Prior to the replacement of any components, attempt to synchronize the mirrors by following the Power Mirrors Synchronization procedure. Refer to Workshop Manual (WSM) Section 501-09 Rear View Mirrors - General Procedures - Power Mirrors Synchronization.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150 vehicles equipped with a direct current/alternating current converter module A (DCACA) inverter (minor feature code HUKAK) may exhibit an illuminated tire pressure monitoring system (TPMS) indicator with diagnostic trouble code (DTC) B124D stored in the BCM. This may be due to the DCACA inverter causing radio frequency interference (RFI). To confirm a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS). To correct this condition, follow the Service Procedure to confirm if the inverter is the source of RFI and mitigate the interference.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150, 2022-2023 Expedition vehicles equipped with 10 channel audio digital signal processing (DSP) module may exhibit a pop noise and/or static in the speakers at start up that cannot be turned down or off using the audio system controls. To confirm a vehicle is built with a 10 channel DSP module, verify the minor feature code, F-150 (IDBBQ)/Expedition (IDBAP or IDBBR), by reviewing the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS) website. To correct the condition, reprogram the DSP module to the latest software level using the Ford Diagnosis and Repair System (FDRS) diagnostic scan tool. For claiming, use causal part 18B849 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Ford and Lincoln vehicles may exhibit DTCs U2100 and/or U3002 stored in the cruise control module (CCM), side obstacle detection control module LH (SODL), side obstacle detection control module RH (SODR), side obstacle detection control module C (SODCMC) and/or side obstacle detection control module D (SODCMD) after a module replacement. DTC U2100 may set when the module has not been properly configured after replacement. DTC U3002 may set when the module has been configured with the incorrect VIN. To correct this condition, verify that the module storing the DTC has been installed following the applicable Workshop Manual (WSM) Removal and Installation procedure. If the DTC is still stored, download and run the Vehicle Identification Number (VIN) Write application found under Toolbox, Multi-Module tab in the Ford Diagnosis and Repair System (FDRS).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150 vehicles may exhibit an illuminated airbag indicator light that may be accompanied by diagnostic trouble codes (DTCs) U3000:41 and/or U3000:54 in the occupant classification system module (OCSM) and/or B00A0:09, B00A0:63, B00A0:64 and/or B00A0:68 in the restraints control module (RCM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150 vehicles equipped with a 3.5L hybrid engine, 2020-2023 Explorer vehicles equipped with a 3.3L hybrid engine and 2020-2023 Aviator vehicles equipped with a 3.0L hybrid engine may exhibit a powertrain malfunction indicator lamp with diagnostic trouble code (DTC) P0A1E stored in the powertrain control module (PCM). This may be due to the belt integrated starter generator (BISG). To correct this condition, follow the Service Procedure to diagnose and repair this symptom.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150 vehicles may exhibit all modules on the HS2, HS3, HS4 and MS CAN networks not responding to the Ford Diagnosis and Repair System (FDRS) and modules on these networks fail the network test. Modules on the FD1 and HS1 networks will communicate with the FDRS. Vehicles equipped with a power opening/closing tailgate may also exhibit an inoperative power tailgate. This may be due to a gateway module (GWM) that is not configured properly. To correct this condition, download and run the GWM - Gateway Module A (GWM) Configuration application. For claiming, use causal part number 14G490 and applicable labor times from Section 10 of the Service Labor Times Standard (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Priority Update 23-PU0724-DOM-RS for 2021-2023 F-150 vehicles is now available. Quality Improvements include: - Various Apple Carplay quality improvements
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 22-2428 and 23-2176 to update the Issue, Action and Service Procedure. Some 2017-2023 F-150, 2018-2023 Expedition/Navigator/Mustang, 2019-2023 Ranger, 2020-2023 Explorer/Aviator/Transit and 2021-2023 Bronco vehicles equipped with a 10R60/10R80/10R80MHT transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the software in the powertrain control module (PCM) or transmission control module (TCM), the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve. To correct the condition, follow the Service Procedure to identify and correct the condition.
NHTSA source summary · Original PDF not reviewed by Recallfolio
In various 2017-2023 Ford and Lincoln vehicles, customers may receive a message in the FordPass or LincolnWay App stating Feature Unavailable. Since this is a fleet vehicle, it cannot access the (SYNC Connect) FordPass or LincolnWay app through the TCU Embedded Modem. If this message appears, the vehicle may be equipped with a fleet telematics module. Replacement of the TCU or TCU related repairs will not prevent this message from appearing. Refer the customer to in app FordPass Guides or LincolnWay Concierge Teams to aid with fleet telematics removal. Open app, select Account > Help > CHAT or CALL option.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150 vehicles may exhibit a no crank/no start with a battery draw and air conditioning (A/C) clutch engaged at all times. This may be due to an opened diode in the A/C clutch field coil damaging the output driver in the body control module C (BCMC). To correct the condition, follow the Service Procedure to replace the BCMC and A/C clutch field coil assembly.
Source components: ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM · EQUIPMENT · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Priority Update 23-PU0110-RAD-PS for 2021-2023 F-150 vehicles is now available. Quality Improvements include: -Keep Customer Programmed Station Presets during OTA updates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some F-Super Duty and F-150 vehicles equipped with trailer tow mirror may exhibit various exterior rear view mirror functional concerns that require replacement after diagnosis. To properly determine if the defect is warrantable, cleaning and close inspection of the affected mirror may be required. To aid in proper warranty determination, the Rear-View Mirror Analysis general service bulletin (GSB) has been updated with a detailed cleaning procedure that should be followed prior to any inspection. New labor operations (17682ZZ or 17682ZZT) have been created that covers the cleaning and inspection process and may be used even if condition of failure is non-warrantable. Ford has inspected numerous returned parts and determined many cases are caused by damage which is unwarrantable and may be subject to chargeback. Refer to the latest version of the GSB on OASIS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150 vehicles may exhibit an inoperative windshield wiper motor condition with diagnostic trouble codes (DTCs) B130F:12 and/or B130F:14 stored in the body control module (BCM), and/or B1131:02 stored in the steering column control module (SCCM). This may be due to the connection at the windshield wiper motor connector. Refer to the Wiring Diagram, Cell 150 - Connector Views, C125 (Windshield Wiper Motor). Workshop Manual (WSM), Section 501-16, Wipers and Washers, Diagnosis and Testing, Pinpoint Test A has recently been updated to provide new direction for this diagnosis. Refer to the WSM, Section 501-16, Wipers and Washers, Diagnosis and Testing, Pinpoint Test A for applicable diagnosis.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022-2023 F-150 and 2023 Expedition/Navigator vehicles built on or after 01-Oct-2022 equipped with a 3.5L GTDI engine may exhibit reduced engine power on startup and an illuminated powertrain malfunction (wrench) indicator with diagnostic trouble code (DTC) P2101 stored in the powertrain control module (PCM). This condition does not affect vehicle durability and no additional diagnosis or service is required for this condition at this time. Inform customers they can remove this condition and continue to drive the vehicle by turning off the vehicle and leaving the vehicle in Key OFF, Engine OFF for at least 30 seconds, then restarting the engine. Engineering is working on a solution that is expected in October 2023. Monitor OASIS for additional information and schedule service appointments once the repair becomes available.
Source components: ELECTRICAL SYSTEM:IGNITION · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM) · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2023 F150 hybrid vehicles may exhibit an intermittent no start and Stop Safely Now message displayed in the instrument panel cluster and diagnostic trouble codes (DTCs) U0293 and/or P1A43 in the BECM or in connected vehicle data. A Powertrain Control Module (PCM) software concern may be triggering the no start condition. Replacement or reprogramming of the BECM or PCM is not recommended for this condition at this time. This does not affect vehicle durability and no additional diagnosis or service is required for this condition at this time. Inform customers that the vehicle will start after leaving it off temporarily. Engineering is currently working on a solution for this condition that is expected in Q4 2023. Monitor OASIS for additional information.
Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL · ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY:MANAGEMENT SYSTEM/ENERGY CONTROL MODULE (BMS/BECM) · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM) · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Priority Update 23-PU0110-RAD-PS for 2021 - 2023 F-150 vehicles is now available. Quality Improvements include: -Keep Customer Programmed Station Presets during OTA updates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 Mustang GT500 and 2023 F-150 Raptor R vehicles built on or before 14-May-2023 may exhibit an oil leak from the spark plug tube seal(s) and/or the Variable Cam Timing (VCT) solenoid seal(s). If this condition is present on an applicable vehicle, replace both of the valve cover assemblies. Refer to Workshop Manual (WSM), Section 303-00. Do not replace the individual seals exhibiting a leak as this may not provide a robust repair. For claiming, use causal part 6582 and applicable labor operations in Section 06 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Ford and Lincoln vehicles may exhibit a condition where the high voltage battery stops charging when connected to level 1 or level 2 chargers with an illuminated malfunction indicator lamp (MIL) and diagnostic trouble code (DTC) P2C94 stored in the secondary on-board diagnostic control module A (SOBDM). To restore charging capability, disconnect the off-board charging station charge handle from the vehicle charge port and reconnect. This condition does not affect vehicle durability and no additional diagnosis or service is required for this condition at this time. Inform customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected in August 2023. Replacement of the SOBDM will not resolve this condition. Monitor OASIS for additional information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150 vehicles equipped with a direct current/alternating current converter module A (DCACA) inverter (minor feature code HUKAK) may exhibit an illuminated tire pressure monitoring system (TPMS) indicator with diagnostic trouble code (DTC) B124D stored in the BCM. This may be due to the DCACA inverter causing radio frequency interference (RFI). To confirm a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS). To correct this condition, follow the Service Procedure to confirm if the inverter is the source of RFI and mitigate the interference.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Mustang Mach-E/F-150, 2022-2023 Expedition/Navigator and 2023 Corsair vehicles may exhibit a Driver Monitoring Camera Blocked message and/or DTCs B115E:97, B15E1:97 and/or B15E2:97 stored in the driver status monitor camera module (CMR). These DTCs should be disregarded unless it is a DTC with a status byte 8F. Other status bytes should be disregarded as they may be caused by a camera obstruction such as driver position, aftermarket devices or dust on the camera. To clear the DTCs, remove anything obstructing the view of the camera and light emitting diodes (LEDs), place the steering wheel in the center position and close the driver door. Connect Ford Diagnosis and Repair System (FDRS) and clear the DTCs. Turn the ignition off and wait 10 seconds. Turn the ignition on and wait 1 minute. Perform the CMR self-test and reevaluate if DTCs persist.
Source components: BACK OVER PREVENTION: CAMERA SYSTEM · EQUIPMENT.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Ford and Lincoln vehicles equipped with SYNC 4 may exhibit the navigation feature in the center display screen only displaying imperial units and not being able to change to metric. This may be due to the software level of the SYNC module (APIM). This issue does not affect vehicle durability and no additional diagnosis or service is required for this condition at this time. Inform customers that engineering is currently working on a solution for this condition and will be released via Ford Power-Up software updates delivered over-the-air (OTA) expected in September 2023. Software will update automatically if vehicle connectivity is enabled in the vehicles settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in September 2023. Monitor OASIS for additional information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150 Tremor vehicles built on or before 18-May-2023 may experience the instrument panel cluster (IPC) goes blank or reboots after attempting to access Trailer Tire Info in the Towing menu. This may be due to the software in the IPC. Engineering is currently investigating this concern. Inform the customer they can continue to drive the vehicle. Monitor OASIS for additional updates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2023 F-150 non-Lightning vehicles built on or before 28-Feb-2023 at Kansas City Assembly Plant or built on or before 07-Mar-2023 at Dearborn Truck Plant may experience an inoperative FordPass application, inoperative remote start and/or inoperative remote lock and unlock that may be combined with diagnostic trouble codes (DTC) U0146:09 stored in the telematics control unit module (TCU) and U2402:00 and/or U2402:92 stored in the gateway module (GWM). This may be due to the software level in the GWM. To correct the condition, follow the Service Procedure to update the GWM to the latest software level via a coordinated flash.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150 vehicles equipped with a 3.3L engine may exhibit an illuminated MIL in the instrument panel cluster (IPC) with DTC P0171 stored in the powertrain control module (PCM). This may be due to the software level of the PCM. To correct this issue, follow the Service Procedure to reprogram the PCM to the latest software level using the Ford Diagnosis and Repair System (FDRS).
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022-2023 F-150 vehicles built on 23-August-2022 and through 30-April-2023 equipped with a 5.0L engine may exhibit an oil leak from the oil filter adaptor to engine block mounting area. This may be due to block porosity just below the oil filter adapter near the main bearing cap outer bolt. To correct the condition, follow the Service Procedure to inspect the engine block for a porosity leak.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150 vehicles may exhibit DTC C0604:00 stored in the powertrain control module (PCM). This may be due to firmware within the left and/or right active air dam (AAD) actuator. To correct this condition, perform normal workshop manual diagnostics and if the concern is still present, replace the right and left AAD actuators. Refer to Workshop Manual (WSM) Section 501-19 Bumpers, Diagnosis and Testing, Active Air Dam (AAD). For claiming, use causal part number 17626 and applicable labor times from Section 10 of the Service Labor Times Standard Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150 vehicles may exhibit a condition where the front passenger OCS (occupant classification system) components (seat cushion foam, OCS bladder with OCSM (occupant classification system module) and front seat cushion adjuster) require replacement. These components are calibrated to each other and must be serviced as an assembly. The OCS service kit components are not to be installed separately. If a new OCS or OCS components are needed, a new OCS service kit must be installed as an assembly, which includes all components of the kit. A new passenger seat cushion cover and the heater mat can be installed separately. Refer to Workshop Manual, Section 501-20B Supplemental Restraint System, Removal and Installation. For claiming, use causal part 632A22 and applicable labor operations in Section 12 of the Service Labor Time Standards Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This article includes information on warranty, technical service tips and other service information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150 vehicles may exhibit an inoperative camera and diagnostic trouble codes (DTC) C1001:01 in the Sync Module (APIM), B115E:15 and/or B115E:31 in the Image Processing Module A (IPMA). This may be due to a loose coaxial cable or circuit connection. If only APIM DTC C1001:01 is present, verify connections between the IPMA and the APIM. If IPMA DTCs B115E:15 and/or B115E:31 are also present, verify connections between the IPMA and the affected camera(s). Refer to cell 145 of the online wiring diagram to identify affected connections. If an issue is found with any coaxial cable, the coaxial cable (10E929) can be serviced individually instead of the entire harness. If all connections are secure, continue with diagnostics in Workshop Manual (WSM), Section 413-13B. For claiming, use causal part number 10E929 and applicable labor operations in Section *10.
NHTSA source summary · Original PDF not reviewed by Recallfolio
TSB 22-2428 is missing some labor operations. For any missing labor operations, claim available new model labor operations or m-time. Refer to this article on the repair order. When replacing the CDF cylinder, the current TSB does not require a complete transmission overhaul or cooler and converter flushing. Ford is currently reviewing the TSB. Monitor OASIS for updates.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · POWER TRAIN · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Software Update 4 P4 for 2023 F-150 vehicles is now available. Quality improvements include: - Minimize time customer cannot enter the vehicle during future inhibit updates. - Addresses U0146-09 DTCs affecting vehicle connectivity
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2023 F-150, 2018-2023 Expedition/Navigator/Mustang, 2019-2023 Ranger, 2020-2023 Explorer/Aviator/Transit and 2021-2023 Bronco vehicles equipped with a 10R60 transmission and built on or before 23-Dec-2022 or with a 18R80/10R80MHT transmission and built on or before 15-Aug-2022 may exhibit a harsh/delayed engagement and/or harsh/delayed shift. It is possible the vehicle may also have an illuminated malfunction indicator lamp (MIL) or diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the software in the PCM or TCM, the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2021-2023 F-150/Expedition may exhibit a pop noise and/or static in the speakers at start up that cannot be turned down or off using the audio system controls. To correct the condition, reprogram the audio digital signal processing module (DSP) to the latest software level using the Ford Diagnosis and Repair System (FDRS) diagnostic scan tool. For claiming, use causal part 18B849 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Ford and Lincoln vehicles equipped with a 2.7L or 3.0L engine may exhibit an upper engine thump/knock noise coming from the left cylinder head. This condition is most noticeable at idle and may lessen at higher engine speed or while driving. This condition does not affect vehicle durability and will not get worse over time. Use a stethoscope or chassis ears and listen just behind the left cylinder head intake VCT solenoid on the cam cover to determine if the thump/knock noise is coming from the cylinder head/camshaft. The left cylinder head and the camshaft roller followers are available as service parts.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Priority Update 23-PU0407-BCDC-FX for 2021 F-150 vehicles is now available. Quality Improvements include: -Restores driver assist functionality on specific VINs that may have a configuration mismatch with the server.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022-2023 F-150/Bronco/Expedition/Navigator/Escape/Corsair/Bronco Sport/Edge/Mustang vehicles built on 04-Sep-2022 and through 30-Dec-2022 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0230 stored in the powertrain control module (PCM). The vehicle may also experience a no start or stall after start. This may be due to an internal PCM issue. If this DTC is present, verify the battery condition, then perform pin point test (PPT) KC of the Work Shop Manual (WSM), Section 310-01. If PPT KC leads to component replacement, start with replacing the PCM and then evaluate the vehicle. If the DTC returns, follow WSM, Section 310-01 PPT KC direction to address the issue.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2020-2023 Escape/Explorer, 2021-2023 F-150 and 2022-2023 Maverick vehicles equipped with a full hybrid electric vehicle (FHEV) powertrain may exhibit a cable connection error screen from the Midtronics xRC-3363 High Voltage Battery Rescue Charger. The xRC-3363 will prompt the Technician to verify the low voltage connections, when no actual fault is present. The technician will need to delete the WiFi connection from the xRC-3365 so it will not automatically reconnect and adjust the date. Next go to Settings>Shop Information>Date/Time Settings and change the date prior to May 1, 2023 and stay off the internet so it will not auto correct itself. Press and hold the power button until the tool turns off. Then turn the xRC-3365 back on and attempt the rescue charge.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022-2023 F-150 Lightning vehicles with Lariat/Platinum trim levels built on or before 06-Jan-2023 and 2022 Expedition vehicles built on or before 28-Oct-2022 may exhibit a concern with the audio system inoperative or no access to FM, AM or satellite radio modes. This may be due to liquid ingress in the audio front control module (ACM) from the top of the dash area. To correct the condition, follow the Service Procedure to replace the ACM and seal the dash seam.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150 vehicles may exhibit various driver assistance system warning messages or inoperative features and/or diagnostic trouble code (DTC) U3000:49 stored in the image processing module A (IPMA) that will not clear and not be stored in the vehicle's history. DTC C1001:31 and/or U3000:89 may be stored in the IPMA, but may have recently been cleared and stored in the vehicle's history. This may be due to a connection issue between the IPMA Camera and the IPMA. To correct the condition, perform the following service procedure to repair the connection and reset the IPMA.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150 vehicles may exhibit a no crank/no start with a battery draw and air conditioning (A/C) clutch engaged at all times. This may be due to an opened diode in the A/C clutch damaging the output driver (FET) in the body control module C (BCMC). To correct the condition, follow the Service Procedure to replace the BCMC and A/C clutch disc and hub assembly.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150 and 2022-2023 F-Super Duty/Expedition/Navigator/Maverick vehicles equipped with an integrated trailer module (iTRM) may exhibit a trailer lamp fault message with various related diagnostic trouble codes (DTC). Most trailer emulator testers will not draw enough current to correctly diagnose these concerns. They may be used to diagnose basic functionality of the iTRM, however, some trailer emulator testers may cause false trailer lamp fault messages to appear. The customer's trailer should be used for diagnosis instead of a trailer emulator tester. Refer to Workshop Manual (WSM), Section 417-01 for normal diagnostics.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150/Mustang Mach-E/Edge vehicles may exhibit a concern of Android Auto unable to wirelessly connect and/or Android phones rebooting when connected to the vehicle via USB. This is due to a concern with the Google application on the customers device. Google has released a fix for these concerns. For Android phones not connecting wirelessly, request that the customer update their Android Auto version to 6.1 or later. For customers who's Android phone reboots when connected via USB, request that the customer update their Chrome application to 88.0.4324.181 or later. The customers service provider should be able to assist customers having difficulty updating their device. This is not a warrantable repair.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2023 F-150 vehicles no longer come equipped with a spare tire lock installed from the factory. This is not a misbuild condition and installation of a spare tire lock is not covered under warranty.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150/Mustang Mach-E and 2023 Expedition/Navigator vehicles equipped with BlueCruise/ActiveGlide may experience loss of BlueCruise/ActiveGlide hands-free driving mode availability and/or BlueCruise/ActiveGlide inoperative and/or diagnostic trouble code (DTC) U2400:00 in the gateway module (GWM) and advanced driver assistance system (ADAS) modules with no other DTCs present. This may be due to an expired BlueCruise/ActiveGlide map file in the GWM and/or the customer's BlueCruise/ActiveGlide map subscription being expired. To correct the condition, follow the Service Procedure to update the GWM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2023 F-150 non-Lightning vehicles built on or before 28-Feb-2023 at Kansas City Assembly Plant or built on or before 07-Mar-2023 at Dearborn Truck Plant may experience an inoperative FordPass application, inoperative remote start and/or inoperative remote lock and unlock that may be combined with diagnostic trouble codes (DTC) U0146:09 stored in the telematics control unit (TCU) and U2402:00 and/or U2402:92 stored in the gateway module (GWM). This may be due to the software level in the GWM. To correct the condition, follow the Service Procedure to update the GWM to the latest software level via a coordinated flash.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2023 F-150 and 2021-2023 Bronco vehicles equipped with a 2.7L or 3.0L EcoBoost engine may exhibit a ticking/tapping or rattle type noise from the top front cover area of the engine on initial start-up after a cold soak of 6 hours or more that may last for 2-5 seconds. This may be due to a stuck internal component of the variable cam timing (VCT) unit. To correct the condition, replace all 4 of the VCT units following Workshop Manual (WSM), Section 303-01. For claiming, use causal part 6C525 and applicable labor operations in Section 6 of the Service Labor Time Standards (SLTS) Manual. If labor times are not available, claim M-time.
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 Mustang Shelby GT500 vehicles built on 27-Sep-2022 and through 04-Nov-2022, and 2023 F-150 Raptor R vehicles built on 21-Sep-2022 and through 13-Feb-2023, may exhibit an engine oil leak from the front of the engine. This may be due to a crankshaft front oil seal leaking due to an out of specification engine front cover seal bore. To correct the condition, replace the engine front cover. Workshop Manual (WSM) procedures for engine front cover replacement have been updated. Refer to WSM, Section 303-01F. For claiming, use causal part 6019 and M-time.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2023 Explorer/Aviator/Transit, 2021-2023 F-150/Bronco, 2022-2023 Expedition/Navigator/Mustang and 2023 F-250/F-350 Super Duty vehicles may exhibit harsh/delayed engagement and/or harsh/delayed shift concerns. These may be addressed with the powertrain control module (PCM)/transmission control module (TCM) Transmission Accelerated Main Control Break In Routine and/or a main control overhaul. Refer to Workshop Manual (WSM), Section 307-01, DTC Chart if DTCs are present and/or Diagnosis By Symptom to identify the clutch(s) to be cycled. Cycling the shift solenoids and clutch control valves to remove contamination must be performed along with an adaptive drive cycle before attempting repair. For claiming, use causal part 7A100 and applicable labor operations in Section 7 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Software Update 4 P2 for 2022- 2023 Model Year F-150 vehicles is now available. Quality improvements include: - Improved vehicle accessibility during OTA update. - Prevents intermittent loss of vehicle connectivity
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150 vehicles equipped with minor feature codes HKRAC (8 inch instrument panel cluster (IPC) screen) and HKCAA (SYNC without navigation) may exhibit a condition where the compass direction indication is stuck or not updating correctly in the IPC. To confirm a vehicle is built with minor feature codes HKRAC and HKCAA, review the build information by double-clicking the vehicle identification number in the upper left-hand corner in the Professional Technician System (PTS). This may be due to a software concern in the instrument panel cluster (IPC). Engineering is currently working on a software update to address this concern. Inform the customer they can continue to drive the vehicle. For 2021 F-150 vehicles exhibiting this concern, perform Technical Service Bulletin 21-2388 and confirm if the concern is still present. Monitor for OASIS for updates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Ford and Lincoln vehicles may exhibit a condition where the high voltage battery stops charging when connected to level 1 or level 2 chargers with an illuminated malfunction indicator lamp (MIL) and diagnostic trouble code (DTC) P2C94 stored in the secondary on-board diagnostic control module A (SOBDM). To restore charging capability, disconnect the off-board charging station charge handle from the vehicle charge port and reconnect. This condition does not affect vehicle durability and no additional diagnosis or service is required for this condition at this time. Inform customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected in June 2023. Replacement of the SOBDM will not resolve this condition. Monitor OASIS for additional information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150 vehicles equipped with a 3.3L engine may exhibit an illuminated MIL in the instrument panel cluster (IPC) with DTC P0171 stored in the powertrain control module (PCM). This may be due to the software of the PCM. Engineering is currently investigating this concern. To temporarily address this issue, clear the DTC and run the PCM - Reset the Keep Alive Memory (KAM) application in the Ford Diagnosis and Repair System (FDRS). Inform the customer they can continue to drive the vehicle. Monitor OASIS for additional updates.
Source components: ELECTRICAL SYSTEM · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150 vehicles equipped with a 3.5L PowerBoost engine may experience a loss of engine coolant with possible engine overheat and/or illuminated malfunction indicator (MIL). This may be due to a crack in the exhaust heat exchanger coolant spigots on the top of the exhaust heat exchanger. The exhaust heat exchanger coolant spigots are now released and should be serviced in pairs. It is no longer necessary to replace the muffler inlet pipe assembly for this type of concern. Workshop Manual, Section 309-00D has been updated to include a new service procedure. For claiming, use causal part 18663 and applicable labor operations in Section 05 of the Service Labor Time Standards (SLTS) Manual. Heat exchanger coolant spigots - NL3Z-18663-A (2 req).
NHTSA source summary · Original PDF not reviewed by Recallfolio
2023 F-150/Escape/Explorer/Maverick vehicles equipped with a full hybrid electric vehicle (FHEV) powertrain may exhibit diagnostic trouble codes (DTCs) P0A7D and/or P0DE6 and the vehicle identification number (VIN) is not recognized by the Midtronics xRC-3363 High Voltage Battery Rescue Charger. The technician will need to manually enter the vehicle charging mode by selecting 2022 model year, then enter the make and model versus entering the VIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150, 2021-2023 F-Super Duty, 2021-2023 Ranger customers may have concerns including, but not limited to: no power to the distribution box, rear camera inoperative, rear park assist inoperative, box lights inoperative, power up/down tailgate inoperative, unable to open tailgate by tailgate switch, and no tailgate ajar message when the tailgate is ajar. These concerns may be caused by faulty connections between the pickup bed, tailgate, rear lamp assemblies, or bumper where connectors are disconnected, damaged, or coated with bedliner. Prior to performing any warranty diagnosis or repairs, verify if the vehicle had an aftermarket spray-in-bedliner. Any repairs resulting from aftermarket products/installation, including but not limited to a spray-in bedliner, are not covered under warranty.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 Mustang Shelby GT500 and 2023 F-150 Raptor R vehicles built on 1-Aug-2022 and through 20-Feb-2023 may exhibit an engine oil leak from the front of the engine. This may be due to a crankshaft front oil seal that is out of position and leaking. To correct the condition, replace the crankshaft front oil seal. Workshop Manual (WSM) procedures for crankshaft front oil seal replacement have been updated. Refer to WSM, Section 303-01F. For claiming, use causal part 6019 and M-time.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022-2023 F-150 vehicles equipped with single exhaust may have various symptoms relating to parking brake, ABS, Traction Control, AdvanceTrac, Park Aid, and/or Locking Differential functionality. Vehicles may also exhibit one or more of the following DTCs in the ABS module: B1111, C1013, C1034, C2005, C2006, C2007, C2008. This condition may be the result of a wiring harness chafing on the left tube of the rear axle. Visually inspect the wiring harnesses in close proximity to the left axle tube, and if damage is found, repair the affected wiring harness following Wiring Diagram Cell 5.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2023 Ford and Lincoln vehicles equipped with a 10R60/10R80/10R80 MHT/10R100 transmission may exhibit a whine noise at idle and/or while driving. This may be identified as coming from the bellhousing and the front of the transmission fluid pan. The whine noise may become louder when the transmission is at operating temperature and may increase with engine revolutions per minute (RPM) in the park (P) position. A small amount of whine noise is considered to be characteristic of the 10R60/10R80/10R80 MHT/10R100 transmissions due to the offset gear drivetrain in the front support and has no effect on durability.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2023 F-150/Bronco customers may experience inoperative remote start and/or remote lock and unlock through the FordPass application. Diagnostic trouble codes (DTCs) U0146:09 may be stored in the telematics control unit (TCU), and U2402:00 and/or U2402:92 may be stored in the gateway module (GWM). Inform the customer they can continue to drive the vehicle. A solution is planned for deployment via Ford Power-Up software updates delivered over-the-air (OTA) beginning June 2023. Software will update automatically on vehicles connected to FordPass. Monitor OASIS for additional information. Schedule a service appointment in late June 2023 for customers that are not connected to FordPass once the repair becomes available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150/Transit, 2022-2023 F-150 Lightning vehicles may experience issues utilizing the Smart Hitch, ProPower Onboard or Onboard Scales features (if equipped) in the FordPass app. Symptoms may include inability to connect, incorrect data displayed in the app, no weight displayed, unable to power on/off the feature, unable to turn on generator mode (gas vehicles only). The connection for these features has been removed from the Android version of the FordPass app, and will soon be removed from the iOS version. The Smart Hitch and Onboard Scales will also be removed in a future FordPass release expected no later than March 1st, 2023. Full functionality of these features will remain in vehicle, but will not be controllable from FordPass. Advise the customer of the FordPass changes and do not perform any repairs for this concern.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150 vehicles equipped with BLIS may experience inoperative blind spot monitoring with a Blind Spot System Fault message in the instrument panel cluster. This may also be accompanied by diagnostic trouble codes (DTCs) B118C:11 and/or B118C:15 stored in the driver door module (DDM), and/or B118D:11 and/or B118D:15 stored in the passenger door module (PDM). This may be due to the connector going from the mirror to the BLIS module (C576 for driver side, C676 for passenger side) having a pin out condition. To correct this condition, inspect the connector on the side experiencing the issue for a pin out condition and repair the circuit as necessary. Refer to Wiring Diagram, Cell 005, Connector Repair Procedures. If there is no issue with the connector or circuit, continue with normal diagnostics.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022-2023 F-150 vehicles equipped with four-wheel drive (4WD), without a center console, and built on 17-Nov-2022 and through 28-Nov-2022 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) U2002 stored in the powertrain control module (PCM). This may be due to an issue with the lower centerstack trim panel where the all terrain control panel (ATCM) mounts. To correct the condition, follow the Service Procedure to replace the lower centerstack trim panel.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2023 F-150 Lightning vehicles built on or before 13-Dec-2022 may experience an inoperative FordPass application, inoperative remote start and/or inoperative remote lock and unlock that may be combined with diagnostic trouble codes (DTC) U0146:09 stored in the telematics control unit (TCU) and U2402:00 and/or U2402:92 stored in the gateway module (GWM). This may be due to the software level in the TCU. To correct the condition, follow the Service Procedure to update the TCU to the latest software level via a coordinated flash.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Software Update 4 P1 for 2023 Model Year F-150 Lightning vehicles is now available. Quality improvements include: - A default trailer profile is now selected on driveaway - Emergency Tow initializing screen pop-up enhancement for 12" screen - Enhancement to bidirection power transfer, currently briefly popping up a fault before switching to main screen - Improvement to max battery charge slider appearance
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022-2023 F-150 Lightning vehicles may experience an Active Air Dam System Fault See Manual warning message in the instrument panel cluster (IPC). This IPC message should be disregarded. Engineering is currently developing software to remove this message from the vehicle, which is scheduled to be available in March 2023. Continue to follow current Workshop Manual (WSM) diagnostics for the active air dam system.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150 vehicles may exhibit a side door ajar and/or a hood ajar warning message displayed in the instrument panel cluster (IPC) with or without diagnostic trouble codes (DTC) P166B, B1175, B1176, B11C1 and/or B11C0. This may be due to a misalignment of the the door or hood and/or their strikers. Before attempting any component diagnosis or replacement, check the door and/or hood and their strikers for proper alignment. Refer to Workshop Manual (WSM), Section 501-03 alignment procedures. If the doors and hood are properly aligned, continue with normal diagnostics.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2018-2023 F-150, Expedition, Navigator, Transit, Aviator and Explorer vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P0627, P025A, P025B, P00C6, P008A and/or U0109 stored in the powertrain control module (PCM). This may be due to an intermittent or partial disconnect of the harness to the fuel pump control module (FPCM) connector, connector pin push-outs, damaged pins/terminals, or loose/corroded grounds. Inspect FPCM connector, applicable grounds (F-150 - G401, Expedition/Navigator - G403, Transit - G401, 2018-2019 Explorer G302, 2020-2022 Explorer/Aviator - G407) and confirm FPCM connector (F-150 - C4336, Expedition/Navigator - C433, Transit - C433, 2018-2019 Explorer - C3239, 2020-2022 Explorer/Aviator - C4033) is fully seated prior to performing PC/ED diagnostics or replacing any components.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles equipped with power folding mirrors may exhibit power folding mirrors that are inoperative or exhibit a clicking sound. This may be due to the mirrors being manually folded in, during transportation, going through a car wash, bumped in a parking lot, or found during pre-delivery inspection (PDI). Prior to the replacement of any components, attempt to synchronize the mirrors by following the Power Mirrors Synchronization procedure. Refer to Workshop Manual (WSM) Section 501-09 Rear View Mirrors - General Procedures - Power Mirrors Synchronization.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2015-2023 F-150, 2017-2022 F-Super Duty, and 2019-2023 Ranger vehicles may exhibit dust ingress into the cabin through the doors or air extractors. This may be due to the climate control system being in recirculation mode as a result of the recirculation button being on or automatic strategies for heating/cooling efficiency. To minimize dust ingress when driving in off-road or secondary road conditions, make sure that all doors and windows are fully closed and the climate control system is switched to defrost on and the instrument panel and footwell air vents are switched to off. Temperature and fan settings may be adjusted as desired. Alternatively, max defrost can be activated which will adjust all settings automatically. Operating in defrost mode will keep constant air flow through the rear air extractors and other small areas, helping minimize dust ingress.
Source components: BACK OVER PREVENTION · STRUCTURE:BODY:DOOR.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 F-150 vehicles may experience a lack of steering assist upon start-up along with a Steering Assist Fault message in the instrument panel cluster (IPC) with diagnostic trouble codes (DTC) U3001:89 and U3000:96 in the power steering control module (PSCM). This may be due to low voltage at the PSCM. Power steering assist will be restored when sufficient voltage is supplied. To clear the DTCs using the Ford Diagnosis and Repair System (FDRS), select and run the PSCM - Reset the Power Steering Control Module (PSCM) application. Once cleared, cycle the ignition to verify normal system operation. If the DTCs return, refer to Workshop Manual Section 211-02 for normal diagnostics. For claiming, use causal part 3504.
Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL · STEERING:STEERING CONTROL MODULE · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022-2023 F-150 Lightning vehicles may exhibit a ting, pop or clicking noise from the front or rear wheel hub when accelerating or applying brakes or when shifting between drive/reverse (torque reversals). This condition may be caused by stick/slip between the hub and half shaft interface, during the torque reversals creating the ting/pop or clicking noise. To correct the condition, follow the Service Procedure to install the new anti-ting washer between the wheel hub and axle shaft and reassemble.