2024 Ford BRONCO Manufacturer communications & TSBs.Page 2
Original record summaries, dates and identifiers for this model-year. Records 101–131 of 131, ordered newest first. Dated records on this page: Jan 9, 2024–Jul 23, 2024.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Jul 23, 2024Service Bulletin/Repair Instructions
SSM 52738
NHTSA communication ID: 11005837
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 Bronco/F-150 (non-Lightning) vehicles may exhibit a "Check Charging System" message in the instrument panel cluster (IPC) while the charging system is fully operational and there are no diagnostic trouble codes (DTC) stored related to the charging system. This may be due to the customer using an aftermarket programmer to change body control module (BCM) configuration.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Quality improvements include: - Robustness action to correct Phone as a Key Feature cease. -Numerous minor quality fixes in ECG Software, not affecting vehicle operation. - Improves connectivity
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 Bronco vehicles may require servicing of the interior door handle lock cable mounting bracket on the interior door handle. The interior door handle cable mounting bracket, base part number 78219A64 (right) and 78219A65 (left), are now available to service separately from the cables and latch mechanisms. It is no longer necessary to replace the complete latch assembly for a damaged interior door handle lock indicator mounting bracket.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 Bronco vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC)s P0096 and/or P007B stored in the powertrain control module (PCM) which may be more prevalent in high ambient air temperatures. For vehicles that meet this criteria, inspect the front of the vehicle for the presence of an aftermarket bumper and/or accessories which may restrict air flow to the charge air cooler and surrounding sensors. Remove the aftermarket accessory and return the vehicle to stock and reevaluate. If the concern returns with the stock bumper/accessories removed, proceed to normal Workshop Manual diagnostics.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 F-150/Bronco and 2023-2024 Escape/F-Super Duty vehicles built with SYNC 4 require a connected phone with Android Auto or Apple CarPlay active to enable voice interactions and use of the steering wheel voice control button. This is due to the affected vehicles not having built in voice interactions capability. Vehicles with built in voice interaction capability can be identified as also being equipped with the built in connected navigation feature which includes a navigation tab on the center display screen. Diagnostics should only be performed for voice interactions on vehicles equipped with built in voice interaction capability or with Android Auto or Apple CarPlay active.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 Bronco vehicles equipped with a dealer installed trailer tow kit may exhibit a "No Key Detected" message displayed in the IPC. This may be due to the remote keyless entry (RKE) antenna connection being left loose or disconnected during trailer tow kit installation. Verify that the vehicle is equipped with the trailer tow kit by checking the window sticker for the trailer tow kit option. If the vehicle was equipped with this dealer installed option, before performing normal diagnostics, inspect the RKE antenna connections located behind the left/rear interior quarter panel. If they are loose or unplugged, re-secure the connector(s) and retest operation. If no loose or unplugged connections are found, refer to Workshop Manual (WSM), Section 419-01 for normal diagnostics. If this vehicle does not have the dealer installed option, refer to the WSM, Section 419-01 for normal diagnostics.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes 24-2080 to add 2024 model year vehicles. Some 2021-2024 Bronco vehicles equipped with a factory soft top roof may exhibit a headliner that is detaching from the soft top material. This may be due to the factory installation process. To correct this condition, follow the Service Procedure to reattach the headliner or replace the soft top roof material.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles equipped with SYNC4 may exhibit one or more of the following symptoms after all currently available accessory protocol interface module (APIM) software updates have been performed. - General system performance, stability, and intermittent system reboots. - Intermittent Wireless CarPlay or Android Auto function. - Phone related concerns with intermittent No Audio or Static. - Navigation/global positioning system (GPS) related concerns through CarPlay and Android Auto. - Alexa function consistency and stability. These symptoms may be due to the software in the APIM. Replacing the APIM will not resolve these symptoms for the customer. Before returning the vehicle to the customer, review the procedures within Workshop Manual, Section 415-00 and ensure the latest APIM software is installed. Refer to General Service Bulletin (GSB) 23-7146 for help determining the latest available level of software. IMPORTANT: some module software updates will only display as available on Ford Diagnosis and Repair System (FDRS) after prerequisite modules are updated. This may require the technician to update certain modules multiple times during the service visit, before the latest APIM software is accessible in FDRS. If symptoms continue after latest APIM software has been installed, inform customers that Ford is working on additional software enhancements which are expected to be delivered over-the-air (OTA) by Q4 2024 on F-150, F-150 Lightning, Mustang Mach-E, Mustang, Escape, Corsair, Expedition, Navigator, Bronco, Mustang, and 2023-2024 F-Super Duty. Software will update automatically if vehicle connectivity is enabled in the vehicle's settings. For all other vehicles with SYNC4, schedule a service visit for customers in October 2024, when the updated APIM software is expected to be available to dealers. Monitor OASIS for additional information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 Bronco vehicles may exhibit paint wearing along on the top inner edge of the tailgate where the rear window weather strip contacts the tailgate. This may be due to the accumulation of dirt between the rear window seal and tailgate. Inform customers that engineering is aware of this condition and is currently working on a solution which is expected in Q3 2024. Schedule a service visit for customers when the repair is available in Q3 2024. Monitor OASIS for additional information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 Bronco vehicles equipped with a factory soft top roof may experience snow or sand accumulation on the vehicles interior during a strong storm with high winds. Inform customers that repair kits are currently on backorder and are expected to be available Q3 2024. Schedule a service visit for customers when the repair is available in Q3 2024. Monitor OASIS for additional information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 Bronco vehicles may experience a repeat loss of window initialization which results in a loss of short drop and/or one-touch up and one-touch down feature operation. This may be due to a recent short drop enhancement that is contained in the driver door module (DDM) and passenger door module (PDM) software. To correct this condition, update the DDM and PDM to the latest software levels then download and run the Loss Of Power Window Initialization Concern application using Ford Diagnosis and Repair System (FDRS). When prompted by the application for a password, use DSPWR-308. If the vehicles DDM and PDM had software part numbers ending with CN or CR when it arrived, advise the customer that the vehicle will no longer exhibit a short drop event to all door windows anytime the vehicle is unlocked using the remote keyless entry (RKE), accessory keyless entry keypad, or the interior door unlock switch.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2024 F-150 and 2021-2024 Bronco vehicles equipped with a 2.7L or 3.0L EcoBoost engine may exhibit a ticking/tapping or rattle type noise from the top front cover area of the engine on initial start-up after a cold soak of 6 hours or more that may last for 2-5 seconds. This may be due to a stuck internal component of the variable cam timing (VCT) unit. To correct the condition, replace all 4 of the VCT units following Workshop Manual (WSM), Section 303-01. For claiming, use causal part 6C525 and applicable labor operations in Section 6 of the Service Labor Time Standards (SLTS) Manual. If labor times are not available, claim M-time.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022-2024 Bronco Raptor vehicles may exhibit an intermittent no crank/no start/discharged battery due to the presence of a parasitic battery drain. This may be due to the instrument panel cluster (IPC) software.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Various vehicles have had pinpoint tests, guided routines and the Warranty and Policy Manual recentlyupdated for diagnostics and repairs on SYNC generation 3 and later applications. When performingdiagnostics and repairs on SYNC Gen 3 or later, select the diagnostics tab and search for related symptoms,DTCs and keywords. The search results will be shown in the search results pane. Read and follow allTechnical Service Bulletins (TSB), Special Service Message (SSM)s or General Service Bulletin (GSB) first if abulletin specifically addresses the vehicle concern. If there are no messages, run the appropriate diagnosticpinpoint test found in the Workshop Manual (WSM). Follow the steps in the pinpoint test. Make sure to note thetitle of the guided routine, using the correct one for the vehicle's symptom or diagnostic trouble code (DTC) iscritical. Depending on the outcome of the pinpoint test, a repair validation code (RVC) may be generated eitherin the pinpoint test or Guided Routine. If the vehicle concern still exists after following the pinpoint tests orguided routine, then a manual RVC can be generated using the RVC Assist Form. A manual RVC can only begenerated once the above process has been followed.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2024 Bronco vehicles equipped with a factory hard top build on 07-Feb-20204 and through 13-Feb-2024 may have a hard top rear cap that is difficult to remove. This may be due to a temporary production change to the bolts that were used to retain the rear cap to the body. These unique bolts have a yellow nylon locking material on the bolt threads that cannot be cleaned off. To correct this condition, replace all hard top rear cap to body bolts with the correct catalog replacements.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2023-2024 F-150 and 2024 Bronco/Transit vehicles may exhibit Apple Carplay Bluetooth connectivity concerns. This may be due to the accessory protocol interface module (APIM) software. To correct this concern, perform a soft reset by pressing the Power and Seek Foward buttons for 5 seconds, or use the SYNC Module Reset function of the Ford Diagnosis and Repair System (FDRS). For claiming, use causal part 14G670 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2021-2023 Bronco vehicles built on or before 9-Jul-2023 may have new version software in their driver door module (DDM) and passenger door module (PDM) that contains noticeable enhancements to the window short drop operation. This software level can be identified in the DDM and PDM as Software Part Number MU5T-14C064-CR or later. This software was released via a software update delivered over-the-air (OTA) starting in September 2023 if the vehicle's connectivity was enabled in the vehicle settings. Vehicles with this new software will exhibit a short drop event to all door windows anytime the vehicle is unlocked using the remote keyless entry (RKE), accessory keyless entry keypad, or the interior door unlock switch. The short drop function will return to the UP position when a lock input is received from these same inputs. For vehicles equipped with passive entry, a short drop event will not activate when a door is unlocked by placing a hand on an exterior door handle. 2023-2024 Bronco vehicles built on and after 10-Jul-2023 received this software from the factory.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022-2024 various Ford/Lincoln vehicles equipped with SYNC 4 may experience concern where customers are receiving an error message when trying to enroll in connected services. This may be due to the gateway module (GWM) software. To correct the concern, download and run the Transport and Factory Mode Deactivation app: under HS1 modules select BCM > Transport and Factory Mode > Download > Run. When the pop-up message appears for Change Vehicle Mode - Transport/Factory/Normal Mode, press OK. This will proceed to the Transport and Factory Mode Deactivation screen, select Unlock Vehicle Connectivity Settings (21 MY + Vehicles). A pop-up message appears noting Vehicle Is Now In Normal Mode, select OK. This will return to the Transport and Factory Mode Deactivation screen, select Exit. A final pop-up notification stating that the application is finished, select OK. For claiming, use causal part 14G490 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022-2024 Broncos Raptors built on and before 13-Feb-2024 and 2021-2024 Broncos equipped with a 2.3L EcoBoost engine may exhibit an illuminated MIL with ignition system DTC(s) P0352, P0353, P0354, P0355, P0357, P2303, P2306, P2309, P2312, P2318, P2304, P2307, P2310, P2313, P2319, and/or P2322 set in the powertrain control module (PCM). This may be due to incorrect cylinder to DTC mapping within the PCM. This means the DTCs listed may set against the incorrect cylinder. Even though the cylinder to DTC mapping is incorrect in the PCM, the presence of these DTCs means that a real ignition system concern is present that requires diagnosis and repair. Prior to performing a pinpoint test for one of the listed DTCs, it will be necessary to identify the correct cylinder that has the issue. Do this by using the Ford diagnosis and repair system (FDRS) to perform a cylinder power balance test. If the results show two cylinders dropping out, begin diagnosing the ignition system components for the cylinder that is dropping out and not setting an ignition related DTC. Due to the incorrect cylinder to DTC mapping
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
For 2015-2024 Ford and Lincoln vehicles equipped with turbocharged engines and customer concern of an engine oil leak, refer to Workshop Manual (WSM), Section 303-00 for oil leak inspection and testing methods. Ford has evaluated turbochargers replaced for oil leak symptoms and although oil may collect on the external surface of a turbocharger, it is extremely rare for a turbocharger assembly to be the root cause of the oil leak. Careful inspection of the turbocharger oil feed and drain tubes should be performed along with the recommended WSM procedures as needed. Warranty claims for turbocharger replacement going forward will be assessed.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 Bronco/F-150, 2023-2024 Escape/F-Super Duty vehicles equipped with SYNC 4 may experience a concern during accessory protocol interface module (APIM) programming where the vehicle's center display screen indicates USB Error. This may be due to a lack of memory space available to perform the APIM software update. If it is a memory concern, the Ford Diagnosis and Repair System (FDRS) will provide an option to delete the voice application. Re-enter the module programming and when prompted, do not select first option - SYNC Module (APIM) Software Update, select the second option - Delete Voice Application(s) From Module. Once deleted, run the SYNC Module (APIM) Software Update as directed, this will update the software and automatically reload the voice app. If the voice delete option is not available, continue with normal diagnostics in the Workshop Manual, Section 418.
NHTSA source summary · Original PDF not reviewed by Recallfolio
During service and repair requiring removal and replacement of a crankshaft bolt and/or crankshaft damper, achieving proper torque of the crankshaft pulley bolt is critical. Incorrect torque may allow the bolt to loosen resulting in the timing gear breaking and engine damage. Replacement of the bolt is critical to the repair and accurately following the installation procedure in the Workshop Manual (WSM) Section, 303-01 is extremely important. The bolt torque procedure can be found in the crankshaft front seal removal and installation procedure or in the engine assembly procedure.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 23-2019 to update the model years affected, add an additional labor operation, and correct the part number called out in the Service Procedure. Some 2021-2024 Bronco vehicles equipped with a MT88 manual transmission may experience a rotational scraping noise while the transmission is in neutral, 1st or 2nd gear with the clutch pedal released and may be more noticeable in ambient temps below 10ðC (50ðF) and after a cold soak. This noise may diminish as the transmission warms up. This may be due to the 5th and 6th gear synchronizer rings.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 Bronco vehicles may exhibit paint damage on the rear quarter panel due to contact with the soft top rear window. This may be due to a contact condition that can occur during extreme off-road driving between the soft top rear window and the rear quarter panel. To correct the condition, follow the Service Procedure to modify the rear window.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 Bronco vehicles may exhibit a parasitic battery draw. This may be due to an interior door lock switch on the driver's and passenger's interior door panels. Prior to normal Workshop Manual (WSM) diagnostics, check both front door lock control switches for damage and/or proper operation. If a front door lock control switch does not operate as designed, repair as necessary. If no problems are found, continue with normal WSM diagnostics. For claiming, use causal part 14028 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual. If the draw is still present, refer to WSM Section 414-00 for normal diagnostics.
Source components: ELECTRICAL SYSTEM · LATCHES/LOCKS/LINKAGES:DOORS:LOCK.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 23-2213 to revise Figure 1, add 2024 vehicles and the part list. Some 2021-2024 Bronco vehicles may exhibit a whistle noise below the lower left windshield area at the bottom of the A-pillar. This may be due to a missed body sealer application at the factory.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 Bronco vehicles equipped with 4x4 with part time engagement and built on or before 12-Jan-2024 may exhibit a condition of the vehicle being stuck in neutral tow mode. This may be due to a concern with the all-wheel drive (AWD) module software. Make sure the proper procedure is being followed to exit neutral tow mode by referring to the Owner's Manual > Towing Your Vehicle > Recreationally Towing Your Vehicle. Make sure the vehicle's battery is fully charged and then diagnose all diagnostic trouble codes (DTCs) in the AWD module. Refer to Workshop Manual (WSM), Section 307-07A. If diagnostics do not resolve the concern or there are no DTCs present in the AWD module, reprogram the AWD module using the latest software level of the Ford Diagnosis and Repair System (FDRS) diagnostic scan tool. Refer to the appropriate section of the WSM. Once the repair is complete, verify the vehicle's ability to successfully enter and exit neutral tow mode by cycling the vehicle in and out of neutral tow mode a minimum of two times, allowing the vehicle to enter sleep mode (key-off for at least 5 minutes) be
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION · UNKNOWN OR OTHER · WHEELS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This artile includes ifnormation on warranty, technical service tips and other service information.
Source components: ELECTRICAL SYSTEM · POWER TRAIN · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
2024 Bronco (non-Raptor) vehicles will not come from the factory with a pre-installed trailer tow package that includes a 2 in. (50.8 mm) trailer hitch, a 4+7 pin electrical connector and supporting software updates. The trailer tow package for the 2024 Bronco (non-Raptor) will only be available as a Ford Accessory Dealer Installed Option (DIO) (service part number VP2DZ-15A416-B). When ordered, the DIO trailer tow package will ship to the dealership that will receive the vehicle so that installation can occur prior to customer delivery. Labor is included with the cost of the Ford Accessory DIO trailer tow package and must not be charged to Ford through warranty.
Source components: EQUIPMENT:ELECTRICAL:AUX AUDIO JACK/PLUG · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 Bronco vehicles may exhibit a rattle from the front windows with the windows placed in the partially down position and driving over rough roads and/or bumps. This condition is currently under investigation and repairs and/or component replacement is not expected to reduce the rattle. Inform customers that they can continue to drive the vehicle and that engineering is currently developing a solution which will be available in Q3 2024. Monitor OASIS and schedule a follow up appointment with the customer when the fix becomes available.
Source components: ENGINE · STRUCTURE: UNDERRIDE · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 Bronco vehicles equipped with SYNC 4 may experience a concern during SYNC module (APIM) programming where the vehicle's center display screen indicates: USB Error. This may be due to a lack of memory space available to perform the APIM software update. If it is a memory concern, the Ford Diagnosis and Repair System (FDRS) will provide an option to delete the voice application. Re-enter the module programming and when prompted, do not select first option - SYNC Module (APIM) Software Update, select the second option - Delete Voice Application(s) From Module. Once deleted, run the SYNC Module (APIM) Software Update as directed, this will update the software and automatically reload the voice app. If the voice delete option is not available, continue with normal diagnostics in the Workshop Manual, Section 418.
Source components: ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE · UNKNOWN OR OTHER.