2022 Ford BRONCO Manufacturer communications & TSBs.Page 2
Original record summaries, dates and identifiers for this model-year. Records 101–200 of 273, ordered newest first. Dated records on this page: Feb 6, 2023–May 30, 2024.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
May 30, 2024Service Bulletin/Repair Instructions
SSM 52574
NHTSA communication ID: 11001112
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles equipped with SYNC4 may exhibit one or more of the following symptoms after all currently available accessory protocol interface module (APIM) software updates have been performed. - General system performance, stability, and intermittent system reboots. - Intermittent Wireless CarPlay or Android Auto function. - Phone related concerns with intermittent No Audio or Static. - Navigation/global positioning system (GPS) related concerns through CarPlay and Android Auto. - Alexa function consistency and stability. These symptoms may be due to the software in the APIM. Replacing the APIM will not resolve these symptoms for the customer. Before returning the vehicle to the customer, review the procedures within Workshop Manual, Section 415-00 and ensure the latest APIM software is installed. Refer to General Service Bulletin (GSB) 23-7146 for help determining the latest available level of software. IMPORTANT: some module software updates will only display as available on Ford Diagnosis and Repair System (FDRS) after prerequisite modules are updated. This may require the technician to update certain modules multiple times during the service visit, before the latest APIM software is accessible in FDRS. If symptoms continue after latest APIM software has been installed, inform customers that Ford is working on additional software enhancements which are expected to be delivered over-the-air (OTA) by Q4 2024 on F-150, F-150 Lightning, Mustang Mach-E, Mustang, Escape, Corsair, Expedition, Navigator, Bronco, Mustang, and 2023-2024 F-Super Duty. Software will update automatically if vehicle connectivity is enabled in the vehicle's settings. For all other vehicles with SYNC4, schedule a service visit for customers in October 2024, when the updated APIM software is expected to be available to dealers. Monitor OASIS for additional information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Quality improvements include: -Addresses SYNC reboot issue may occurs after 2 hours of continuous use. -Adds a "some display features may be temporarily unavailable" message to the SYNC screen when a SYNC update is installing. -Vehicle Enhancement: Software Updates currently has the title ‘Recurring Update Schedule’ in Setting, Tittle will change to Reccuring Schedule
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 Bronco vehicles may exhibit paint wearing along on the top inner edge of the tailgate where the rear window weather strip contacts the tailgate. This may be due to the accumulation of dirt between the rear window seal and tailgate. Inform customers that engineering is aware of this condition and is currently working on a solution which is expected in Q3 2024. Schedule a service visit for customers when the repair is available in Q3 2024. Monitor OASIS for additional information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 Bronco vehicles equipped with a factory soft top roof may experience snow or sand accumulation on the vehicles interior during a strong storm with high winds. Inform customers that repair kits are currently on backorder and are expected to be available Q3 2024. Schedule a service visit for customers when the repair is available in Q3 2024. Monitor OASIS for additional information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Bronco vehicles equipped with a 2.7L or 3.0L engine may exhibit an illuminated MIL with DTC P25B4, P25B6, and/or P0299 stored in the powertrain control module (PCM). This may be due to a loose nut on the turbo actuator arm causing an under boost condition
NHTSA source summary · Original PDF not reviewed by Recallfolio
All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 Bronco vehicles may experience a repeat loss of window initialization which results in a loss of short drop and/or one-touch up and one-touch down feature operation. This may be due to a recent short drop enhancement that is contained in the driver door module (DDM) and passenger door module (PDM) software. To correct this condition, update the DDM and PDM to the latest software levels then download and run the Loss Of Power Window Initialization Concern application using Ford Diagnosis and Repair System (FDRS). When prompted by the application for a password, use DSPWR-308. If the vehicles DDM and PDM had software part numbers ending with CN or CR when it arrived, advise the customer that the vehicle will no longer exhibit a short drop event to all door windows anytime the vehicle is unlocked using the remote keyless entry (RKE), accessory keyless entry keypad, or the interior door unlock switch.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2024 F-150 and 2021-2024 Bronco vehicles equipped with a 2.7L or 3.0L EcoBoost engine may exhibit a ticking/tapping or rattle type noise from the top front cover area of the engine on initial start-up after a cold soak of 6 hours or more that may last for 2-5 seconds. This may be due to a stuck internal component of the variable cam timing (VCT) unit. To correct the condition, replace all 4 of the VCT units following Workshop Manual (WSM), Section 303-01. For claiming, use causal part 6C525 and applicable labor operations in Section 6 of the Service Labor Time Standards (SLTS) Manual. If labor times are not available, claim M-time.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022-2024 Bronco Raptor vehicles may exhibit an intermittent no crank/no start/discharged battery due to the presence of a parasitic battery drain. This may be due to the instrument panel cluster (IPC) software.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 23-2400 to update the parts list. Some 2021-2023 Bronco vehicles may encounter a Sta-bar Disconnect Service Required message in the instrument panel cluster and an illuminated warning light with diagnostic trouble codes (DTCs) stored in the chassis control module (CHCM)
NHTSA source summary · Original PDF not reviewed by Recallfolio
Various vehicles have had pinpoint tests, guided routines and the Warranty and Policy Manual recentlyupdated for diagnostics and repairs on SYNC generation 3 and later applications. When performingdiagnostics and repairs on SYNC Gen 3 or later, select the diagnostics tab and search for related symptoms,DTCs and keywords. The search results will be shown in the search results pane. Read and follow allTechnical Service Bulletins (TSB), Special Service Message (SSM)s or General Service Bulletin (GSB) first if abulletin specifically addresses the vehicle concern. If there are no messages, run the appropriate diagnosticpinpoint test found in the Workshop Manual (WSM). Follow the steps in the pinpoint test. Make sure to note thetitle of the guided routine, using the correct one for the vehicle's symptom or diagnostic trouble code (DTC) iscritical. Depending on the outcome of the pinpoint test, a repair validation code (RVC) may be generated eitherin the pinpoint test or Guided Routine. If the vehicle concern still exists after following the pinpoint tests orguided routine, then a manual RVC can be generated using the RVC Assist Form. A manual RVC can only begenerated once the above process has been followed.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Bronco vehicles equiped with a 2.7L engine may exhibit an ilumintated MIL with DTC P0456 stored in the powertrain control module (PCM). This may be due to the software level of the PCM and has no effect on vehicle operation.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes 23-2024 to update parts list to include rivets. Some 2021-2023 Bronco vehicles equipped with a factory soft top roof may exhibit a headliner that is detaching from the soft top material. This may be due to the factory installation process.
Source components: EQUIPMENT · STRUCTURE · STRUCTURE:BODY:ROOF AND PILLARS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2021-2023 Bronco vehicles built on or before 9-Jul-2023 may have new version software in their driver door module (DDM) and passenger door module (PDM) that contains noticeable enhancements to the window short drop operation. This software level can be identified in the DDM and PDM as Software Part Number MU5T-14C064-CR or later. This software was released via a software update delivered over-the-air (OTA) starting in September 2023 if the vehicle's connectivity was enabled in the vehicle settings. Vehicles with this new software will exhibit a short drop event to all door windows anytime the vehicle is unlocked using the remote keyless entry (RKE), accessory keyless entry keypad, or the interior door unlock switch. The short drop function will return to the UP position when a lock input is received from these same inputs. For vehicles equipped with passive entry, a short drop event will not activate when a door is unlocked by placing a hand on an exterior door handle. 2023-2024 Bronco vehicles built on and after 10-Jul-2023 received this software from the factory.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022-2024 Broncos Raptors built on and before 13-Feb-2024 and 2021-2024 Broncos equipped with a 2.3L EcoBoost engine may exhibit an illuminated MIL with ignition system DTC(s) P0352, P0353, P0354, P0355, P0357, P2303, P2306, P2309, P2312, P2318, P2304, P2307, P2310, P2313, P2319, and/or P2322 set in the powertrain control module (PCM). This may be due to incorrect cylinder to DTC mapping within the PCM. This means the DTCs listed may set against the incorrect cylinder. Even though the cylinder to DTC mapping is incorrect in the PCM, the presence of these DTCs means that a real ignition system concern is present that requires diagnosis and repair. Prior to performing a pinpoint test for one of the listed DTCs, it will be necessary to identify the correct cylinder that has the issue. Do this by using the Ford diagnosis and repair system (FDRS) to perform a cylinder power balance test. If the results show two cylinders dropping out, begin diagnosing the ignition system components for the cylinder that is dropping out and not setting an ignition related DTC. Due to the incorrect cylinder to DTC mapping
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
For 2015-2024 Ford and Lincoln vehicles equipped with turbocharged engines and customer concern of an engine oil leak, refer to Workshop Manual (WSM), Section 303-00 for oil leak inspection and testing methods. Ford has evaluated turbochargers replaced for oil leak symptoms and although oil may collect on the external surface of a turbocharger, it is extremely rare for a turbocharger assembly to be the root cause of the oil leak. Careful inspection of the turbocharger oil feed and drain tubes should be performed along with the recommended WSM procedures as needed. Warranty claims for turbocharger replacement going forward will be assessed.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Many body control module C (BCMC) warranty return parts are coming back with no trouble found. To verify that the BCMC is at fault prior to replacing, perform the following. First, disconnect the battery then check all BCMC connectors for terminal pushout, pin damage, spread terminals, and corrosion. Refer to Workshop Manual Section 100-00 Wire Terminal Inspection and Replacement. If none found, reconnect the BCMC and battery terminals then recheck functionality. If concern still exists, proceed with BCMC replacement.
Source components: ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 Bronco/F-150, 2023-2024 Escape/F-Super Duty vehicles equipped with SYNC 4 may experience a concern during accessory protocol interface module (APIM) programming where the vehicle's center display screen indicates USB Error. This may be due to a lack of memory space available to perform the APIM software update. If it is a memory concern, the Ford Diagnosis and Repair System (FDRS) will provide an option to delete the voice application. Re-enter the module programming and when prompted, do not select first option - SYNC Module (APIM) Software Update, select the second option - Delete Voice Application(s) From Module. Once deleted, run the SYNC Module (APIM) Software Update as directed, this will update the software and automatically reload the voice app. If the voice delete option is not available, continue with normal diagnostics in the Workshop Manual, Section 418.
NHTSA source summary · Original PDF not reviewed by Recallfolio
During service and repair requiring removal and replacement of a crankshaft bolt and/or crankshaft damper, achieving proper torque of the crankshaft pulley bolt is critical. Incorrect torque may allow the bolt to loosen resulting in the timing gear breaking and engine damage. Replacement of the bolt is critical to the repair and accurately following the installation procedure in the Workshop Manual (WSM) Section, 303-01 is extremely important. The bolt torque procedure can be found in the crankshaft front seal removal and installation procedure or in the engine assembly procedure.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 23-2019 to update the model years affected, add an additional labor operation, and correct the part number called out in the Service Procedure. Some 2021-2024 Bronco vehicles equipped with a MT88 manual transmission may experience a rotational scraping noise while the transmission is in neutral, 1st or 2nd gear with the clutch pedal released and may be more noticeable in ambient temps below 10ðC (50ðF) and after a cold soak. This noise may diminish as the transmission warms up. This may be due to the 5th and 6th gear synchronizer rings.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Bronco (non-Raptor) vehicles built on or before 09-Jul-2023 may exhibit a fluid leak from the front drive axle pinion seal. This may be due to operating the vehicle under high load. If leaking, replace the pinion seal following Workshop Manual (WSM) section 205-03A > Removal and Installation > Drive Pinion Flange and Seal. To prevent subsequent seal leaks, the front differential fluid must also be replaced using the revised specification Motorcraftî SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant, part number XY-75W85-QL. Refer to WSM section 205-03A > General Procedures > Differential Draining and Filling. For claiming use causal part number 3254 with applicable labor operations in Section 3 of the Service Labor Time Standards (SLTS) Manual and M-Time. Reference this SSM article number in the warranty claim.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 Bronco vehicles may exhibit paint damage on the rear quarter panel due to contact with the soft top rear window. This may be due to a contact condition that can occur during extreme off-road driving between the soft top rear window and the rear quarter panel. To correct the condition, follow the Service Procedure to modify the rear window.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 Bronco vehicles may exhibit a parasitic battery draw. This may be due to an interior door lock switch on the driver's and passenger's interior door panels. Prior to normal Workshop Manual (WSM) diagnostics, check both front door lock control switches for damage and/or proper operation. If a front door lock control switch does not operate as designed, repair as necessary. If no problems are found, continue with normal WSM diagnostics. For claiming, use causal part 14028 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual. If the draw is still present, refer to WSM Section 414-00 for normal diagnostics.
Source components: ELECTRICAL SYSTEM · LATCHES/LOCKS/LINKAGES:DOORS:LOCK.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Software Update 23- PU0605-STBR-DSC for 2022 MY BRONCO vehicles is now available. Quality Improvements include: - Address incorrectly setting the Sta-Bar Disconnect DTC issue.
Source components: BACK OVER PREVENTION:SOFTWARE · ELECTRICAL SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Bronco vehicles built on or before 28-Feb-2023 may exhibit water entry into the rear trunk. This may be due to a lack of body seam sealer at the floor panel to trunk sheet metal joint. This repair procedure addresses water entry from underneath of the vehicle into the rear trunk area (jack storage compartment). This article does not apply if water is entering the vehicle from above the rear trunk area (such as from the roof, rear window etc.). To correct the condition, follow the Service Procedure to apply seam sealer to the forward trunk to floor panel sheet metal joint.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 23-2213 to revise Figure 1, add 2024 vehicles and the part list. Some 2021-2024 Bronco vehicles may exhibit a whistle noise below the lower left windshield area at the bottom of the A-pillar. This may be due to a missed body sealer application at the factory.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 Bronco vehicles equipped with 4x4 with part time engagement and built on or before 12-Jan-2024 may exhibit a condition of the vehicle being stuck in neutral tow mode. This may be due to a concern with the all-wheel drive (AWD) module software. Make sure the proper procedure is being followed to exit neutral tow mode by referring to the Owner's Manual > Towing Your Vehicle > Recreationally Towing Your Vehicle. Make sure the vehicle's battery is fully charged and then diagnose all diagnostic trouble codes (DTCs) in the AWD module. Refer to Workshop Manual (WSM), Section 307-07A. If diagnostics do not resolve the concern or there are no DTCs present in the AWD module, reprogram the AWD module using the latest software level of the Ford Diagnosis and Repair System (FDRS) diagnostic scan tool. Refer to the appropriate section of the WSM. Once the repair is complete, verify the vehicle's ability to successfully enter and exit neutral tow mode by cycling the vehicle in and out of neutral tow mode a minimum of two times, allowing the vehicle to enter sleep mode (key-off for at least 5 minutes) be
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION · UNKNOWN OR OTHER · WHEELS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 Bronco vehicles may exhibit a rattle from the front windows with the windows placed in the partially down position and driving over rough roads and/or bumps. This condition is currently under investigation and repairs and/or component replacement is not expected to reduce the rattle. Inform customers that they can continue to drive the vehicle and that engineering is currently developing a solution which will be available in Q3 2024. Monitor OASIS and schedule a follow up appointment with the customer when the fix becomes available.
Source components: ENGINE · STRUCTURE: UNDERRIDE · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2024 Bronco vehicles equipped with SYNC 4 may experience a concern during SYNC module (APIM) programming where the vehicle's center display screen indicates: USB Error. This may be due to a lack of memory space available to perform the APIM software update. If it is a memory concern, the Ford Diagnosis and Repair System (FDRS) will provide an option to delete the voice application. Re-enter the module programming and when prompted, do not select first option - SYNC Module (APIM) Software Update, select the second option - Delete Voice Application(s) From Module. Once deleted, run the SYNC Module (APIM) Software Update as directed, this will update the software and automatically reload the voice app. If the voice delete option is not available, continue with normal diagnostics in the Workshop Manual, Section 418.
Source components: ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes 23-2105 to update the vehicle model years affected and customer symptoms. Some 2021-2023 Bronco vehicles may experience at least one of the following symptoms: intermittent blank/frozen center display screen that resets automatically, Android Auto Apple Carplay connectivity, checkerboard display, center display screen reset and/or Bluetooth connectivity. This may be due to the software in the SYNC module (APIM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 23-2219 to update the Parts List. Some 2021-2023 Bronco vehicles may exhibit no 3rd gear engagement and/or a grinding noise going into 3rd and/or 4th gear. This may be due to the transmission shifting system and clutch interaction such as a lack of full clutch disengagement during shifts and/or placing weight upon the gear shift lever while driving. To correct this condition, follow the Service Procedure to replace the 3rd and/or 4th gears and/or synchronizers as needed.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 23-2086 to update the parts list. Some 2021-2023 Bronco vehicles may encounter a Sta-bar Disconnect Service Required message in the instrument panel cluster and an illuminated warning light with any of the following diagnostic trouble codes (DTCs) stored in the chassis control module (CHCM): C103A, C1A99, C1B03, C1B07, C1B14 and/or B1A67. To correct the condition, follow the Service Procedure to address water intrusion and reprogram the CHCM.
Source components: ELECTRICAL SYSTEM · ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 23-2196 to update the Service Procedure. Some 2021-2022 Bronco vehicles equipped with a 2.7L or 3.0L EcoBoost engine may exhibit various charging system error messages and/or illuminated charging system indicator displayed in the instrument panel cluster (IPC) with diagnostics trouble code (DTC) B11DB set within the body control module (BCM). This may be due to coolant contamination into the battery monitor sensor (BMS) and/or in line connector from a leaking transmission fluid heater coolant control valve. To correct the condition, follow the Service Procedure to clean the BMS connector and replace the transmission fluid heater coolant control valve.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 23-2163 to update the Parts List. Some 2021-2022 Bronco vehicles built on or before 25-Jul-2022 may exhibit a rattle noise from the tailgate when driving on rough roads. The rattle may diminish with the spare tire removed. This may be due to the design of the tailgate and tailgate hinges. To correct this condition, follow the Service Procedure to replace the tailgate and the upper and lower tailgate hinges.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2023 Explorer/Aviator and 2021-2023 Bronco vehicles equipped with a 10R60 transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the software in the powertrain control module (PCM) or transmission control module (TCM), the transmission solenoid ID strategy and/or sticking valves in the main control valve body. To correct the condition, follow the Service Procedure to identify and correct the condition.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Ford and Lincoln vehicles equipped with SYNC 4 may exhibit the navigation feature in the center display screen only displaying imperial (feet and miles) units and not being able to change to metric (meters and kilometers) units. This may be due to the software level of the SYNC module (APIM). To correct this condition, follow the Service Procedure to update the APIM to the latest software level via a coordinated flash. NOTE: The APIM software update that addresses the symptom listed in this article may have been sent via Ford Power-Up software updates delivered over-the-air (OTA) to connected vehicles that have automatic updates enabled through the center display screen. Enter the vehicle identification number (VIN) in Professional Technician System (PTS) and check the OTA Dashboard under the Connected Vehicle tab for OTA update history. If an update to the APIM has successfully completed recently and the customer is reporting the symptoms are no longer present, this article may not apply.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Bronco vehicles equipped with 4x4 with part time engagement may exhibit a condition of the vehicle being stuck in neutral tow mode. This may be due to a concern with the all-wheel drive (AWD) module. Make sure the proper procedure is being followed to exit neutral tow mode by referring to the Owner's Manual > Towing Your Vehicle > Recreationally Towing Your Vehicle. Make sure the vehicle's battery is fully charged and then diagnose all diagnostic trouble codes (DTCs) in the AWD module. Refer to Workshop Manual (WSM), Section 307-07A. If diagnostics do not resolve the concern or there are no DTCs present in the AWD module, replace the transfer case and the AWD module. Refer to the appropriate section of the WSM. Once repair is complete, verify the vehicle's ability to successfully enter and exit neutral tow mode by cycling the vehicle in and out of neutral tow mode a minimum of two times, allowing the vehicle to enter sleep mode (key-off for at least 5 minutes) between each cycle. Inform customers that Ford is currently working on a software update to address this condition without a need
Source components: ELECTRICAL SYSTEM:SOFTWARE · POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE) · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 22-2146 to update the parts list. Some 2021-2022 Bronco vehicles equipped with a soft top roof may experience paint scratches on the sports tube paint due to contact with the soft top roof frame during the open and close operation. This may be due to a lack of protective measures installed on the soft top roof frame. To correct this condition, follow the Service Procedure to install protective plates and hook and loop fasteners to sections of the soft top roof frame.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Software Update SU4 P4 for 2022-2023 Bronco is now available. Quality improvements include: - Prevent unintended Fuel level MIL after future OTA updates. -Various Apple Carplay quality improvements -Electronic Brake Boost (EBB) interaction enhancement during neutral tow operation.
Source components: EQUIPMENT:ELECTRICAL:INFOTAINMENT · EQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE · SERVICE BRAKES.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2022 Bronco vehicles built on or before 31-Mar-2022 and equipped with a factory hard top roof may have an older style latch decal installed that is no longer available to order. Replacement hard top roof panels will come with a newer style latch decal. This will create an appearance mismatch condition with the original roof panels that will still have the older style decals installed. To correct this condition, follow the Service Procedure to install newer style latch decals on all original hard top roof panels.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Bronco vehicles may exhibit a charging system lamp that illuminates briefly and/or intermittently, and/or diagnostic trouble code (DTC) B11DB:08 in the body control module (BCM). This may be due to a loose fuse terminal for the 3 amp fuse in the battery positive fuse assembly. If this condition is present, compare fuse removal effort between the 3A fuse in the battery positive fuse assembly and like fuses in the under hood fuse box. If removal effort for the 3A fuse is low, replace the battery positive fuse assembly to correct this condition. Refer to Workshop Manual (WSM) Section 404-01 > Removal and Installation > Low Voltage High Current Fuse. For claiming, use causal part 14526 and M-time.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Harvest Program 23H05 Certain 2022 Model Year Navigator and 2022-2023 Model Year Mach-E, F150 Lightning, F150, Expedition and Bronco - Instrument Cluster Odometer Inspection
Source components: ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER:SENSOR/SENDING UNIT · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Bronco vehicles may exhibit an illuminated MIL with DTCs P0096 and/or P007B in the powertrain control module (PCM), which may be more prevalent in high ambient air temperatures. For vehicles that meet this criateria, inspect the front of the vehicle for the presence of an aftermarket bumper and/or accessories which may restrict air flow to the charge air cooler and surrounding sensors. Remove the aftermarket accessory and return the vehicle to stock and reevaluate. If the concern returns with the stock bumper/accessories removed, proceed to normal Workshop Manual diagnostics.
Source components: ENGINE AND ENGINE COOLING:COOLING SYSTEM · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2023 Ford and Lincoln vehicles equipped with a 10R60/10R80/10R80 MHT/10R100 transmission may exhibit a whine noise at idle and/or while driving. This may be identified as coming from the bellhousing and the front of the transmission fluid pan. The whine noise may become louder when the transmission is at operating temperature and may increase with engine revolutions per minute (RPM) in the park (P) position. A small amount of whine noise is considered to be characteristic of the 10R60/10R80/10R80 MHT/10R100 transmissions due to the offset gear drivetrain in the front support and has no effect on durability. Use the Report a Vehicle Concern link at the bottom of OASIS to submit a report if there is a customer concern of whine noise describing operating conditions and noise severity.
NHTSA source summary · Original PDF not reviewed by Recallfolio
"Priority Update 23-PU0813-DOR-UP2 for 2022 Bronco vehicles is now available. Quality Improvements include: -Update the strategy to learn window travel hard stop at top and bottom to reduce unintended window bounce back and to prevent loss of one touch function."
Source components: VISIBILITY:POWER WINDOW DEVICES AND CONTROLS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Bronco vehicles may exhibit no 3rd gear engagement and/or a grinding noise going into 3rd and/or 4th gear. This may be due to the transmission shifting system and clutch interaction such as a lack of full clutch disengagement during shifts and/or placing weight upon the gear shift lever while driving. To correct this condition, follow the Service Procedure to replace the 3rd and/or 4th gears and/or synchronizers as needed.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 23-2006 to update the vehicle model years affected. Some 2021-2023 Bronco vehicles may encounter a Sta-bar Disconnect Service Required message in the instrument panel cluster and an illuminated warning light with any of the following diagnostic trouble codes (DTCs) stored in the chassis control module (CHCM): C103A, C1A99, C1B03, C1B07, C1B14 and/or B1A67. To correct the condition, follow the Service Procedure to address water intrusion and reprogram the CHCM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
During replacement of the electronic front stabilizer bar disconnect assembly on 2021-2023 Bronco vehicles, removal and replacement of the sta-bar harness is required. To assist engineering with root cause analysis of failed sta-bar disconnect assemblies, include the sta-bar harness with the part in the same package when returning warranty replacement sta-bar disconnect assembly. The sta-bar disconnect assembly return should also be packaged in the original box with all protective insulators in place to properly protect it during shipping. Use the Report a Vehicle Concern link at the bottom of OASIS to submit a report with photos attached (if possible) for any front stabilizer bar disconnect concerns.
Source components: ELECTRICAL SYSTEM · ELECTRONIC STABILITY CONTROL (ESC) · SUSPENSION:FRONT:STABILIZER BAR.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 22-2428 and 23-2176 to update the Issue, Action and Service Procedure. Some 2017-2023 F-150, 2018-2023 Expedition/Navigator/Mustang, 2019-2023 Ranger, 2020-2023 Explorer/Aviator/Transit and 2021-2023 Bronco vehicles equipped with a 10R60/10R80/10R80MHT transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the software in the powertrain control module (PCM) or transmission control module (TCM), the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve. To correct the condition, follow the Service Procedure to identify and correct the condition.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2022 Bronco vehicles equipped with a soft top roof may exhibit loose exterior fabric on the rear window assembly. This may be due to broken D-pillar clips on the rear window. To correct the condition, replace the rear window. Refer to the Workshop Manual (WSM), Section 501-18A > Removal and Installation > Soft Top Assembly.
NHTSA source summary · Original PDF not reviewed by Recallfolio
In various 2017-2023 Ford and Lincoln vehicles, customers may receive a message in the FordPass or LincolnWay App stating Feature Unavailable. Since this is a fleet vehicle, it cannot access the (SYNC Connect) FordPass or LincolnWay app through the TCU Embedded Modem. If this message appears, the vehicle may be equipped with a fleet telematics module. Replacement of the TCU or TCU related repairs will not prevent this message from appearing. Refer the customer to in app FordPass Guides or LincolnWay Concierge Teams to aid with fleet telematics removal. Open app, select Account > Help > CHAT or CALL option.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Bronco vehicles equipped with a soft top roof may exhibit rear quarter window(s) that do not stay attached to the rear window after driving the vehicle or using the soft top quick access cargo function to raise the rear of the soft top assembly for luggage compartment access. This may be due to a retention channel on the rear window that is too narrow. To correct this condition, replace the rear window assembly (service base part # 7842006). Refer to Section 501-18A > Removal and Installation > Soft Top Assembly.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Bronco vehicles equipped with a factory subwoofer and built on or before 20-Mar-2023 may exhibit a rattle from right loadspace trim panel at high audio system volumes. This may be due to poor retention from the right loadspace trim panel tree fasteners. To correct this condition, follow the Service Procedure to replace the tree fasteners on the right loadspace trim panel.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2022 Bronco vehicles may exhibit a charging system fault message displayed in the instrument panel cluster (IPC), various diagnostic trouble codes (DTCs) related to charging system, and/or a charging system that has stopped functioning after water fording in muddy water. This may be the result of mud accumulation inside the generator causing it to fail. To resolve the concern, follow the Service Procedure to replace the generator and install a revised generator shield onto the vehicle.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022-2023 Bronco vehicles built on 01-Sept-2022 and through 20-Mar-2023 may exhibit an intermittent illuminated hood ajar indicator on the instrument panel cluster and/or a false alarm activation caused by a hood ajar event. This may be due to an internal failure of the hood latch while the hood remains properly latched. To correct the condition, replace the hood latch (service base part number 16700). For claiming, use the causal part number 16700 and applicable labor operations in Section 12 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2022 Bronco vehicles equipped with a soft top may exhibit exterior wear on the sides of the soft top material above the B-pillar. This may be due to contact and rubbing between the soft top frame and soft top material. To correct the condition, follow the Service Procedure to replace both right and left deflectors attached to the soft top frame and soft top material.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Bronco vehicles built on or before 31-May-2023 may exhibit a whistle noise below the lower left windshield area at the bottom of the A-pillar. This may be due to a missed body sealer application at the factory. To correct this condition, follow the Service Procedure to reseal the affected body seam.
NHTSA source summary · Original PDF not reviewed by Recallfolio
LC SYNC (8in screen) updates are being redeployed for 2021-2022 Broncos. Quality improvements include: - Management of memory space to allow future updates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Ford and Lincoln vehicles equipped with SYNC 4 may exhibit the navigation feature in the center display screen only displaying imperial units and not being able to change to metric. This may be due to the software level of the SYNC module (APIM). This issue does not affect vehicle durability and no additional diagnosis or service is required for this condition at this time. Inform customers that engineering is currently working on a solution for this condition and will be released via Ford Power-Up software updates delivered over-the-air (OTA) expected in September 2023. Software will update automatically if vehicle connectivity is enabled in the vehicles settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in September 2023. Monitor OASIS for additional information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2022 Bronco vehicles may exhibit an illuminated powertrain malfunction (wrench) indicator with diagnostic trouble codes (DTCs) stored in the all-wheel drive (AWD) module. The setting of these DTCs result in an inoperative 4WD system that may be intermittent. These DTCs may be setting due to a low battery state of charge. To correct the condition, follow the Service Procedure to verify the battery condition and reprogram the AWD module.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Bronco vehicles equipped with a soft top roof may exhibit rear quarter window(s) that do not stay attached to the rear window after driving the vehicle or using the soft top quick access cargo function to raise the rear of the soft top assembly for luggage compartment access. This may be due to a retention channel(s) on the rear window that is too narrow. Do not replace the rear quarter windows. To correct this condition, follow the Service Procedure to secure the rear quarter window(s) in place until a new rear window can be obtained to permanently correct this condition.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This article supersedes TSB 23-2135 to update the Part List. Some 2021-2022 Bronco vehicles equipped with a 2.7L or 3.0L EcoBoost engine may exhibit various charging system error messages and/or illuminated charging system indicator displayed in the instrument panel cluster (IPC) with diagnostics trouble code (DTC) B11DB set within the body control module (BCM). This may be due to coolant contamination into the battery monitor sensor (BMS) from a leaking transmission fluid heater coolant control valve. To correct the condition, follow the Service Procedure to clean the BMS connector and replace the transmission fluid heater coolant control valve.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Bronco vehicles may exhibit the HVAC switching out of recirculation without input. This may be due to the air flow mode door inlet strategy while in recirculation mode. This strategy periodically purges the cabin air every 30-60 minutes depending on conditions the vehicle is operated in. If monitoring the Air Inlet Door PID with FDRS, it can go to approximately 50 % movement of the Air Inlet Door while in recirculation mode. During this climate control system strategy operation the recirculation button light should not go off. This is normal operation of the climate control system and no repairs should be attempted. If the recirculation button/light goes off then reference Workshop Manual (WSM), Section 412-00.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Bronco vehicles may exhibit a rattle from the front windows with the windows placed in the partially down position and driving over rough roads and/or bumps. This condition is currently under investigation and repairs and/or component replacement is not expected to reduce the rattle. Inform customers that they can continue to drive the vehicle and that engineering is currently developing a solution which will be available in Q4 2023. Monitor OASIS and schedule a follow up appointment with the customer when the fix becomes available.
Source components: VISIBILITY · VISIBILITY:POWER WINDOW DEVICES AND CONTROLS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Bronco vehicles equipped with a MT88 manual transmission may experience a rotational scraping noise while the transmission is in neutral, 1st or 2nd gear with the clutch pedal released and may be more noticeable in ambient temps below 10°C (50°F) and after a cold soak. This noise may diminish as the transmission warms up. This may be due to the 5th and 6th gear synchronizer rings. To correct the condition, follow the Service Procedure to replace the 5th and 6th gear synchronizer rings.
Source components: POWER TRAIN · POWER TRAIN:MANUAL TRANSMISSION:INTERNAL:GEARS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This article includes information on warranty, technical service tips and other service information.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Software Update 4 P2 for 2021-2023 Bronco vehicles is now available. Quality improvements include: - Minimize time customer cannot enter the vehicle during future inhibit updates.
NHTSA source summary · Original PDF not reviewed by Recallfolio
TSB 22-2428 is missing some labor operations. For any missing labor operations, claim available new model labor operations or m-time. Refer to this article on the repair order. When replacing the CDF cylinder, the current TSB does not require a complete transmission overhaul or cooler and converter flushing. Ford is currently reviewing the TSB. Monitor OASIS for updates.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · POWER TRAIN · UNKNOWN OR OTHER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2022 Bronco vehicles built on or before 18-Sept-2022 may exhibit a broken parking brake switch. The original parking brake switch design is no longer available. For vehicles within this build date that require parking brake switch replacement, follow the Service Procedure to install a steering column opening cover which will come with a new and improved parking brake switch design.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Bronco vehicles may exhibit an inaccurate AAT reading with DTC P0072 stored in the powertrain control module (PCM). The Workshop Manual (WSM), Section 413-01 > pinpoint test (PPT) BC has been updated to address this concern. The AAT WSM updates include: improved diagnosis and testing, AAT sensor reset, and the AAT sensor interaction with climate control system and gateway module A (GWM).
Source components: ELECTRICAL SYSTEM:SOFTWARE · POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Bronco vehicles may exhibit a warning message displayed in the instrument panel cluster (IPC) that there is a trailer connected to the vehicle when no trailer is connected. The Workshop Manual (WSM), Section 417-01 > Trailer Lamps, has been updated with Pinpoint Test (PPT) J - Message Center Displays An Incorrect Trailer Message.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2023 F-150, 2018-2023 Expedition/Navigator/Mustang, 2019-2023 Ranger, 2020-2023 Explorer/Aviator/Transit and 2021-2023 Bronco vehicles equipped with a 10R60 transmission and built on or before 23-Dec-2022 or with a 18R80/10R80MHT transmission and built on or before 15-Aug-2022 may exhibit a harsh/delayed engagement and/or harsh/delayed shift. It is possible the vehicle may also have an illuminated malfunction indicator lamp (MIL) or diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the software in the PCM or TCM, the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Ford and Lincoln vehicles equipped with a 2.7L or 3.0L engine may exhibit an upper engine thump/knock noise coming from the left cylinder head. This condition is most noticeable at idle and may lessen at higher engine speed or while driving. This condition does not affect vehicle durability and will not get worse over time. Use a stethoscope or chassis ears and listen just behind the left cylinder head intake VCT solenoid on the cam cover to determine if the thump/knock noise is coming from the cylinder head/camshaft. The left cylinder head and the camshaft roller followers are available as service parts.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2022 Bronco vehicles built on or before 25-Jul-2022 may exhibit a rattle noise from the tailgate when driving on rough roads. The rattle may diminish with the spare tire removed. This may be due to the design of the tailgate and tailgate hinges. To correct this condition, follow the Service Procedure to replace the tailgate and the upper and lower tailgate hinges.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022-2023 F-150/Bronco/Expedition/Navigator/Escape/Corsair/Bronco Sport/Edge/Mustang vehicles built on 04-Sep-2022 and through 30-Dec-2022 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0230 stored in the powertrain control module (PCM). The vehicle may also experience a no start or stall after start. This may be due to an internal PCM issue. If this DTC is present, verify the battery condition, then perform pin point test (PPT) KC of the Work Shop Manual (WSM), Section 310-01. If PPT KC leads to component replacement, start with replacing the PCM and then evaluate the vehicle. If the DTC returns, follow WSM, Section 310-01 PPT KC direction to address the issue.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2021-2022 F-150 vehicles with 2.7L, 3.3L, 3.5L EcoBoost or 5.0L engines, 2020-2022 Transit vehicles with 3.5L Duratec/3.5L EcoBoost engines, 2021-2023 Bronco with the 2.3L or 2.7L engine having charging system diagnostics performed in the Workshop Manual (WSM) may experience the generator voltage desired (GENVDSD) parameter identification (PID) missing from the powertrain control module (PCM) PID list in the Ford Diagnosis And Repair System (FDRS) scan tool. This may be due to a software parameter in the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM.
Source components: BACK OVER PREVENTION:SOFTWARE · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 Aviator/Bronco/Expedition/Explorer/F-150/Mustang/Navigator/Ranger/Transit vehicles built on or before 31-Jul-2022 equipped with a 10R60/10R80/10R80 MHT automatic transmission may exhibit a fluid leak from the selector shaft seal. This may be caused by a crack in the manual shaft. To correct this condition, follow the Service Procedure to replace the manual shaft, the manual shaft-to-sensor roll pin and the selector shaft seal.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2022 Bronco vehicles equipped with a 2.7L or 3.0L EcoBoost engine may exhibit various charging system error messages and/or illuminated charging system indicator displayed in the instrument panel cluster (IPC) with diagnostics trouble code (DTC) B11DB set within the body control module (BCM). This may be due to coolant contamination into the battery monitor sensor (BMS) from a leaking transmission fluid heater coolant control valve. To correct the condition, follow the Service Procedure to clean the BMS connector and replace the transmission fluid heater coolant control valve.
Source components: ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM · ENGINE AND ENGINE COOLING.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2022 Bronco vehicles may exhibit paint damage on the rear quarter panel due to contact with the rear window assembly (D-pillar). This may be due to an oversized washer being used during production. To correct the condition, repair the paint damage to the rear quarter panel and replace the rear window assembly.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2023 F-150 and 2021-2023 Bronco vehicles equipped with a 2.7L or 3.0L EcoBoost engine may exhibit a ticking/tapping or rattle type noise from the top front cover area of the engine on initial start-up after a cold soak of 6 hours or more that may last for 2-5 seconds. This may be due to a stuck internal component of the variable cam timing (VCT) unit. To correct the condition, replace all 4 of the VCT units following Workshop Manual (WSM), Section 303-01. For claiming, use causal part 6C525 and applicable labor operations in Section 6 of the Service Labor Time Standards (SLTS) Manual. If labor times are not available, claim M-time.
Source components: ENGINE AND ENGINE COOLING · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022-2023 Bronco vehicles built on or after 01-Sep-2022 may exhibit an intermittent illuminated hood ajar indicator on the instrument panel cluster and/or a false alarm activation caused by a hood ajar event. This may be due to an internal failure of the hood latch. For vehicles that meet this criteria, replace the hood latch (service base part number 16700) to repair the vehicle. For claiming use the causal part number 16700 and applicable labor operations in Section 12 of the Service Labor Time Standards (SLTS).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Priority Update 22-PU0301-ESC-NT for 2022-2023 Bronc vehicles is now available. Quality Improvements include: - Change in the interaction of the EBB with Neutral Tow feature. - Improved ESC yaw rate plausibility check
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Bronco vehicles may exhibit a diagnostic trouble code (DTC) B15F1:15 code stored in memory of the passenger door module (PDM). This code was intended for a right mirror indicator light emitting diode (LED) feature on vehicles and currently is not used. This code may be due to PDM module software. If the PDM module exhibits DTC B15F1:15, the DTC should be ignored.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2020-2023 Explorer/Aviator/Transit, 2021-2023 F-150/Bronco, 2022-2023 Expedition/Navigator/Mustang and 2023 F-250/F-350 Super Duty vehicles may exhibit harsh/delayed engagement and/or harsh/delayed shift concerns. These may be addressed with the powertrain control module (PCM)/transmission control module (TCM) Transmission Accelerated Main Control Break In Routine and/or a main control overhaul. Refer to Workshop Manual (WSM), Section 307-01, DTC Chart if DTCs are present and/or Diagnosis By Symptom to identify the clutch(s) to be cycled. Cycling the shift solenoids and clutch control valves to remove contamination must be performed along with an adaptive drive cycle before attempting repair. For claiming, use causal part 7A100 and applicable labor operations in Section 7 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2022 Bronco vehicles may experience at least one of the following symptoms: blank/frozen center display screen, Android Auto Apple Carplay connectivity, checkerboard display and/or Bluetooth connectivity. This may be due to the software in the accessory protocol interface module (APIM). To correct the condition, follow the Service Procedure to reprogram the APIM. NOTE: The APIM software update that addresses the symptom listed in this article may have been sent via Ford Power-Up software updates delivered over-the-air (OTA) to connected vehicles that have automatic updates enabled through the SYNC 4 screen. Enter the vehicle identification number (VIN) in Professional Technician System (PTS) and check the OTA Dashboard under the Connected Vehicle tab for OTA update history. If an update to the APIM has successfully completed recently and the customer is reporting the symptoms are no longer present, this article may not apply.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2022 Bronco vehicles equipped with a soft top roof may exhibit loose exterior fabric on the rear window assembly. This may be due to broken D-pillar clips on the rear window. To correct the condition, follow the Service Procedure to replace the D-pillar clips with rivets and washers.
Source components: EQUIPMENT · STRUCTURE:BODY:ROOF AND PILLARS · VISIBILITY:POWER WINDOW DEVICES AND CONTROLS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2017-2023 Ford and Lincoln vehicles equipped with a 10R60/10R80/10R80 MHT/10R100 transmission may exhibit a whine noise at idle and/or while driving. This may be identified as coming from the bellhousing and the front of the transmission fluid pan. The whine noise may become louder when the transmission is at operating temperature and may increase with engine revolutions per minute (RPM) in the park (P) position. A small amount of whine noise is considered to be characteristic of the 10R60/10R80/10R80 MHT/10R100 transmissions due to the offset gear drivetrain in the front support and has no effect on durability.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customers who neutral (4-wheel flat) tow a 2021-2022 Bronco equipped with a 2.7L engine or a 2022-2023 Bronco Raptor may report an inconsistent brake assist when a supplemental braking system has been installed. This may result from supplemental brake system set-up that does not account for the vehicles anti-lock brake (ABS) module entering sleep mode after a pre-determined period of time following vehicle shut-down. This functionality was necessary to prevent a battery drain from occurring. Enhanced software has been developed to keep the ABS module in a consistent sleep state when the vehicle enters neutral tow mode. For vehicles that meet this criterion, reprogram the ABS module using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use casual part 2C219.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 Explorer/Aviator/Bronco vehicles built on or before 9-Aug-2022 and equipped with a 10R60 automatic transmission may exhibit a harsh 7-6 gear downshift. This may be caused by the A clutch piston return spring snap ring becoming dislodged. To correct the condition, follow the Service Procedure to replace the front support assembly and A clutch components.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2022 Ford and Lincoln vehicles equipped with SYNC 4 may experience an error message during the gateway module (GWM) software update application which states Procedure Unsuccessful- GetConfigDataFromGIVIS. This may be the result of a server related concern. To correct the condition, download and run the Ford Diagnosis and Repair System (FDRS) application GWM-Read the Gateway Module A (GWM) Configuration Data application. When the application completes, refresh and re-attempt the GWM-Gateway Module A (GWM) Software Update application. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2022 Bronco vehicles may exhibit a charging system fault message displayed in the instrument panel cluster (IPC) after water fording in muddy water. This may be the result of mud accumulation inside the generator causing it to fail. To resolve the concern, follow the Service Procedure to replace the generator and install a revised generator shield onto the vehicle.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2021-2023 Bronco vehicles are equipped with a smart windshield wiper motor, which has the capability of sensing load of the wiper blades coming across the windshield glass. As a result of this operational characteristic/design, the operation may not be what is expected in certain conditions. The vehicle is programmed with protection features to prevent damage to the wiper motor in case of overheating, operation with dry windshields, or obstructions to the wiper blade (snow, ice, etc.). In such conditions, the wiper motor will temporarily reduce its speed and/or reduce area of cleaning until the condition is no longer present.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2023 Bronco vehicles may exhibit a creak/pop type noise when any of the side doors are opened and closed. This may be due to incorrect door installation, alignment and/or incorrect tightening of the two bolts which hold the door to the vehicle body. To correct this condition, inspect for and address any damage to the door and/or latch components, then remove and reinstall the suspect door following the instructions located in the Digital Owners Manual, Removable Vehicle Components > Removable Doors > Removing and Installing the Doors. In this section you ll also find a detailed tutorial video of the process. If the noise persists, perform the Front/Rear Door Alignment procedure located in the Workshop Manual (WSM), Section 501-03 Body Closures.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2022 Bronco vehicles may encounter a concern of the A/C working intermittently and DTC P0532 stored in the PCM. If this symptom is exhibited have the technician inspect connector C1062 at the pressure transducer for corrosion and/or terminal fretting. The pins in this connector may be worn creating the intermittent A/C operation. Technicians can perform a wiggle test at this connector to duplicate the issue. If the concern can be duplicated with a wiggle test, replace the pigtail service connector and the pressure transducer sensor and install dielectric grease inside both to prevent reoccurrence.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021-2022 Bronco vehicles may exhibit a whistle noise below the lower left windshield area at the bottom of the A-pillar. This may be due to a missed body sealer application at the factory. To correct this condition, follow the Service Procedure to reseal the affected body seam.