2013 Chevrolet SONIC Manufacturer communications & TSBs.Page 16
Original record summaries, dates and identifiers for this model-year. Records 1,501–1,600 of 1,724, ordered newest first. Dated records on this page: Jan 1, 2013–Apr 4, 2013.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Apr 4, 2013Service Bulletin/Repair Instructions
PI0924
NHTSA communication ID: 10130613
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary information bulletin provides recomandations for Intermitent Unwanted Trunk Opening While Vehicle is Parked Concern.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician that some customers may comment that when returning to the vehicle the ignition key requires high effort or may not turn from the lock position. Technician should be advised that this model is equipped with a steering column lock. If the vehicle is turned off with the steering wheel turned it may rotate back against the steering lock causing the lock to bind, resulting in the key cylinder binding.
NHTSA source summary · Original PDF not reviewed by Recallfolio
GENERAL MOTORS: ON SOME TRUCKS AND PASSENGER VEHICLES, ACCESSORY POWER OUTLETS (APO) AND TRAILER LIGHTING ARE COMMON ACCESSED ELECTRICAL SYSTEMS THAT ARE AFFECTED BY DEVICES THAT ARE PLUGGED IN AND BECOME INOPERATIVE DUE TO AN OPEN FUSE AND NO PROBLEM WITH VEHICLE IDENTIFIED. MODELS YEARS 2010-2014 TRUCKS AND PASSENGER. NO MODELS. *PE
Source components: ELECTRICAL SYSTEM · ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
CHEVROLET: RECALL BULLETIN. SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. ON SOME VEHICLES, AT TIME OF MANUFACTURING, WERE BUILT WITH INCORRECT VEHICLE EMISSION CONTROL LABEL, IDENTIFYING VEHICLE AS FLEXIBLE FUEL. MODELS 2013 TRAX, SONIC. *PE
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL · EQUIPMENT:OTHER:LABELS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that the keyless entry is inoperative. Technician should inspect the ignition key cylinder door sticks in the up position. If the door is found open do not replace the ignition key cylinder, use a Lubriplate type of lubrication spray and lubricate the ignition key cylinder door. Insert the tip of the key in and out to verify the door of the cylinder is not sticking.
Source components: ELECTRICAL SYSTEM · ELECTRICAL SYSTEM:IGNITION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information accessory power outlet and trailer lighting fuse replacement due to electrical systems that can be affected by devices that are plugged in by the customer.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have an OnStar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down, remove power to the OnStar module for five minutes. After the power has been removed for five minutes, if the OnStar system is working release the vehicle. If the OnStar system is still inoperative continue with published Service Information diagnostics.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician being unable to program fobs to the vehicle. Technician will need to ensure the key FOB is a new unit and has not been programmed to another vehicle previously.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary information bulletin provides a procedure for a low and reverse and 1-2-3-4- clutch housing overhaul to eliminate a bump, surge or vibration at an idle in drive at a stop.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on the appearance of chromed aluminum wheels due to chemical staining, pitting corrosion and/or spotted.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician that a noise or a vibration in the vehicle that seems to be abnormal may not have been there when the vehicle was purchased. Technician should look for Non - General Motors aftermarket accessories installed on the vehicle that can cause these issues.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that the radio will shut off intermittently after a cold start or after cycling of high load devices such as rear de-fogger. Dealer should communicate to the customer that we apologize for this inconvenience and that General Motors is working on a solution for this concern.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that intermittently the Instrument Panel Cluster may go inoperative and the only thing working is the check engine light or the Instrument Panel Cluster backlighting intermittently flashes on and off. Technician should inspect fuse F26DA in the Instrument Panel fuse block for a spread terminal and a damaged fuse. Technician should follow the latest version of PIC5813 if a terminal is found spread.
Source components: ELECTRICAL SYSTEM · ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician that, when testing any circuit for open or resistance, it is imperative that all related terminal pin fit and tension be checked when the test steps require disconnection of the connector or component, prior to any component replacement. Always use the recommended terminal test tool during these tests.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have loose terminals in the Instrument Panel Fuse Block and is seeking direction since Service Information Indicates the terminals are not serviceable. Technician can be replace the terminal using Terminal 2-964284-1 which can be found in the J38125 Terminal Kit and is in Lear Tray 25.
Source components: ELECTRICAL SYSTEM · ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have oil consumption or blue smoke from the exhaust. Technician will need to inspect the engine oil level and inspect the positive crankcase ventilation hoses, turbo housing, spark plugs, cylinders, intake manifold and air ducts for signs of excessive oil. Technician will also need to follow the latest versions of PI0552 and PIP4925. Technician will need to remove all pistons and inspect ring condition and for cracks between the number 1 and 2 compression ring lands, if no air leaks are found. If cracked piston ring lands are found, then inspect the cylinder head to determine first or second design. Technician will need to replace the cylinder head if it is the 1st design. Also the pistons rings will need to be placed.
Source components: ENGINE AND ENGINE COOLING · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
BUICK/CADILLAC/CHEVROLET/GMC/SAAB: SOME VEHICLES HAVE FLOOR MATS THAT ARE DIFFICULT TO FULLY SEAT ON CARPET SIDE RETAINER DUE TO FLOOR RETAINER BEING BROKEN AND VARIOUS BREAKPOINTS FOR STYLE OF RETAINER AND BECAUSE DIFFERENT STYLES OR DESIGNS NOT INTERCHANGEABLE AND CONTAINS NON MATCHING RETAINERS. MODELS 2010-13 LACROSSE, SRX, 2011-13 REGAL, CRUZE, EQUINOX, VOLT, TERRAIN, 9-4X, 2012-13 VERANO, SONIC, 2008-13 CTS AND 2013 MALIBU. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician that the Electronic Brake Control Module and the Brake Pressure Modulator Valve parts restriction has ended. Dealer can now order the parts directly through your Parts Department without General Motors Technical Assistance Center authorization.
Source components: EQUIPMENT:ELECTRICAL · EQUIPMENT:MECHANICAL · SERVICE BRAKES.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides information on replacement for the auxiliary floor mat retainer due to the floor mat retainer won't seat on the carpet.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information for service agents not required to contact product quality center for CNG, LPG or gasoline engine, transmission and/or transfer case.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician that the Engine Control Module has ended no longer be on restriction through the General Motors Product Quality Center. Dealer can now order part through the normal Customer Care and Aftersales parts process.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about melted plastic piece in the engine block deck that may be found when performing mechanical engine repairs. If the Technician finds melted or distorted oil feed restrictor orifice is found, engine replacement is required at this time.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides information on the driver airbag light is flashing in the cluster and/or the passenger airbag ON indicator does not illuminate when the passenger is present when the SDM setup has not been completed after reprogramming.