16NA158
NHTSA communication ID: 10139095
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin describes the Dealer special tool loan program process.
Source components: EQUIPMENT.
Source record 10139095 at NHTSAThe manufacturer’s record · Page 8 of 21
Original record summaries, dates and identifiers for this model-year. Records 701–800 of 2,028, ordered newest first. Dated records on this page: Mar 21, 2017–Nov 22, 2017.
Back to 2014 Chevrolet IMPALA problems & recallsThis archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
NHTSA communication ID: 10139095
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin describes the Dealer special tool loan program process.
Source components: EQUIPMENT.
Source record 10139095 at NHTSANHTSA communication ID: 10139089
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information to dealership personnel on automatic transmission shift and engine drivability concerns and/or MIL ON due to aftermarket oil bath air filter use.
Source components: ENGINE · EQUIPMENT · POWER TRAIN.
Source record 10139089 at NHTSANHTSA communication ID: 10125126
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication a diagnostic tip if the high speed lan bus is shorted to ground, which can cause the BCM to appear off line.
Source components: ELECTRICAL SYSTEM.
Source record 10125126 at NHTSANHTSA communication ID: 10125122
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that the keyless entry is inoperative. Technician should inspect the ignition key cylinder door sticks in the up position. If the door is found open do not replace the ignition key cylinder, use a Lubriplate type of lubrication spray and lubricate the ignition key cylinder door. Insert the tip of the key in and out to verify the door of the cylinder is not sticking.
Source components: ELECTRICAL SYSTEM:IGNITION.
Source record 10125122 at NHTSANHTSA communication ID: 10139118
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides a listing of the parts availability for coax repair procedures and what is needed to complete some repairs.
Source components: EQUIPMENT.
Source record 10139118 at NHTSANHTSA communication ID: 10139108
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information for assisting the customer in setting the position for the memory mirror and the reverse tilt
Source components: VISIBILITY.
Source record 10139108 at NHTSANHTSA communication ID: 10139090
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides repair information for repairing the IP to body harness connector to correct a customer concern for intermittent Malfunction Indicator Lamp (MIL) illuminated with Reduced Engine Power displayed and DTC P2138 set.
Source components: ELECTRICAL SYSTEM · ENGINE.
Source record 10139090 at NHTSANHTSA communication ID: 10139111
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides a procedure to replace the catalytic converters due to cracks that may cause a noise or exhaust smell within the cabin.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
Source record 10139111 at NHTSANHTSA communication ID: 10125106
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicle's odometer appears to be inaccurate relative to a known distance traveled. Technician should obtain a hand-held GPS unit to test the odometer. If a hand held GPS unit is not available, the only other option is to verify the miles traveled using a surveyor's wheel or a dynamometer.
Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL.
Source record 10125106 at NHTSANHTSA communication ID: 10139098
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides a procedure to install dust deflectors when replacing wheel bearings on vehicles no matter what the concern is of the vehicle.
Source components: EQUIPMENT · WHEELS.
Source record 10139098 at NHTSANHTSA communication ID: 10134594
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provides dealership personnel with policy and procedure requirements for essential tools that include consumable parts (U.S. Only).
Source components: ENGINE · EQUIPMENT.
Source record 10134594 at NHTSANHTSA communication ID: 10134621
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information for the IPC odometer programming method quick reference guide.
Source components: EQUIPMENT.
Source record 10134621 at NHTSANHTSA communication ID: 10134592
NHTSA source summary · Original PDF not reviewed by Recallfolio
The information in this bulletin details the proper configurations for the ignition key, fob, key tags, key rings, key ring sizes and applying a QR code sticker or barcode sticker to a key fob.
Source components: ELECTRICAL SYSTEM:IGNITION · ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:CONTROL MODULE.
Source record 10134592 at NHTSANHTSA communication ID: 10123274
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary information communicates additional diagnosticsand repairto assist in resolving a malfunction indicator lampillumination due to any combination of diagnostic trouble codes P0068 P0101 P0106 P0171 P0131 P0137 P0324 P0326 P0331 P0506.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10123274 at NHTSANHTSA communication ID: 10134593
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered seepage.
Source components: EQUIPMENT.
Source record 10134593 at NHTSANHTSA communication ID: 10123232
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary information communicates the identification process for High Feature V6 camshafts in re-manufactured engines.
Source components: ENGINE.
Source record 10123232 at NHTSANHTSA communication ID: 10134569
NHTSA source summary · Original PDF not reviewed by Recallfolio
Low Audible Whine Noise has been found to be transmitting from the balance shaft drive chain.
Source components: ENGINE.
Source record 10134569 at NHTSANHTSA communication ID: 10123230
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary information communicates diagnostic assistance and repairs for specific driveability concerns that can be caused by the intake rocker arm oil control solenoid.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10123230 at NHTSANHTSA communication ID: 10123227
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D-37 history in the Vehicle Communication Interface Module or telematics communication interface control module. Engineering has determined that this code will only display in history on the scan tool and will not cause issues with OnStar system operation.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10123227 at NHTSANHTSA communication ID: 10123222
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about what XM offerings are available for vehicles. A dealer or customer can access the website listed below for vehicle specific XM offerings and availability.
Source components: ELECTRICAL SYSTEM · EQUIPMENT · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10123222 at NHTSANHTSA communication ID: 10123218
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides the technician with the steps to diagnose and repair the concern of mildew odor or water on front floor on either side of the vehicle. Technician will gain access to the front wheelhouse of the affected side. The front wheel house flange may have a void in the sealer causing water to leak through and accumulate on the floor or wet carpet will be found. A thumb grade sealer will need to be placed in the void to prevent the water leak into the cabin.
Source components: STRUCTURE:BODY.
Source record 10123218 at NHTSANHTSA communication ID: 10123211
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a loud tick or rattle noise under the hood at all operating conditions. Technician will need to check the lower and oil pressure to the upper end oil pressure. Technician will need to inspect the oil feed orifice in the cylinder head. Technician will clean out and debris found in the orifice.
Source components: STRUCTURE:BODY:HOOD.
Source record 10123211 at NHTSANHTSA communication ID: 10190338
NHTSA source summary · Original PDF not reviewed by Recallfolio
Essential Tools that Include Consumable Parts (U.S. Only)
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10190338 at NHTSANHTSA communication ID: 10190337
NHTSA source summary · Original PDF not reviewed by Recallfolio
Information Regarding the Differences Between Fluid Leakage and Seepage This bulletin is intended to help identify the differences between what is considered a fluid leak and what is considered seepage. Improper diagnosis may lead to unnecessary component replacement. Use the following information to determine if the condition is normal acceptable seepage or a defective component
Source components: SUSPENSION:FRONT:MACPHERSON STRUT · SUSPENSION:FRONT:SHOCK ABSORBER · SUSPENSION:REAR:SHOCK ABSORBER.
Source record 10190337 at NHTSANHTSA communication ID: 10190336
NHTSA source summary · Original PDF not reviewed by Recallfolio
Information for Fleet Vehicles Ignition Key, Fob and Key Rings Configuration Some Customers are bundling multiple keys, fobs, and key tags together on a single crimped loop or a cable. This practice may result in unintended key rotation, and should be discontinued immediately. The information in this bulletin details the proper configurations for the ignition key, fob, key rings and key tags and applying a QR code sticker or barcode sticker to a key fob.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10190336 at NHTSANHTSA communication ID: 10190321
NHTSA source summary · Original PDF not reviewed by Recallfolio
Information for Fleet Vehicles Ignition Key, Fob and Key Rings Configuration Some Customers are bundling multiple keys, fobs, and key tags together on a single crimped loop or a cable. This practice may result in unintended key rotation, and should be discontinued immediately. The information in this bulletin details the proper configurations for the ignition key, fob, key rings and key tags and applying a QR code sticker or barcode sticker to a key fob.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10190321 at NHTSANHTSA communication ID: 10190320
NHTSA source summary · Original PDF not reviewed by Recallfolio
IPC Odometer Programming Method Quick Reference Guide
Source components: ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER:SENSOR/SENDING UNIT · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10190320 at NHTSANHTSA communication ID: 10190310
NHTSA source summary · Original PDF not reviewed by Recallfolio
Exhaust Smell and/or Leak with Possible Malfunction Indicator Lamp Illuminated Condition Some customers may comment on an exhaust smell and/or leak with possible malfunction indicator lamp illuminated. During diagnosis, a technician may find DTC P0430 and/or P0420. Cause This may be due to a crack around the catalytic mounting flange. Correction Replace converter assembly with new service part.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR.
Source record 10190310 at NHTSANHTSA communication ID: 10190230
NHTSA source summary · Original PDF not reviewed by Recallfolio
LOW AUDIBLE WHINE NOISE FROM ENGINE
Source components: ENGINE · EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10190230 at NHTSANHTSA communication ID: 10157041
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D stored in Telematics Communication Interface Control Module. Technician will use Global Diagnostic System 2 to review the Firmware Over-the-Air version. If the Firmware Over-the-Air version on the scan tool equals 6708 the technician will need to contact General Motors Technical Assistance Center for further assistance. If the Firmware Over-the-Air version on the scan tool is lower than 6708 Dealer can order the part thought the Instrument Sales and Service website process.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10157041 at NHTSANHTSA communication ID: 10159623
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information of a possible misfire that may happen from incorrect camshafts being installed in the reman engines.
Source components: ENGINE AND ENGINE COOLING.
Source record 10159623 at NHTSANHTSA communication ID: 10159570
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements.
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY.
Source record 10159570 at NHTSANHTSA communication ID: 10157020
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2. There are 5 terminated leads in a package part number is 13505346, which can be ordered through your normal General Motors Customer Care and Aftersales parts channel.
Source components: ELECTRICAL SYSTEM · EQUIPMENT · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10157020 at NHTSANHTSA communication ID: 10157018
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
Source components: ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT · FUEL SYSTEM, GASOLINE · TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS.
Source record 10157018 at NHTSANHTSA communication ID: 10159613
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information for programming the low speed LAN module due to the mirrors memory position reverse tilt position is inoperative.
Source components: ELECTRICAL SYSTEM.
Source record 10159613 at NHTSANHTSA communication ID: 10157015
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication informs dealer technicians of a potential whining noise that can occur after servicing the water pump, water pump chain or cylinder head without use of the water pump sprocket holding tool. Dealers are advised this condition is the result of a water pump chain tensioner ratcheting out. The dealer is directed to follow service information to reset the water pump chain tensioner to correct.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10157015 at NHTSANHTSA communication ID: 10159575
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty admin bulletin explains to the technician additional information may be needed when submitting transactions when doing wiring repairs.
Source components: ELECTRICAL SYSTEM:WIRING.
Source record 10159575 at NHTSANHTSA communication ID: 10159572
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin explains the importance of maintaining the vehicle.
Source components: EQUIPMENT.
Source record 10159572 at NHTSANHTSA communication ID: 10159569
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin advises the possible issues that may occur using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.
Source record 10159569 at NHTSANHTSA communication ID: 10156999
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · EQUIPMENT:ELECTRICAL.
Source record 10156999 at NHTSANHTSA communication ID: 10156990
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts/kits. Technicians should refer to Service Information for information regarding most accessories. Technicians may also contact Partech and/or the Techline Customer Support Center for additional support.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10156990 at NHTSANHTSA communication ID: 10159574
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
Source components: ENGINE.
Source record 10159574 at NHTSANHTSA communication ID: 10159267
NHTSA source summary · Original PDF not reviewed by Recallfolio
17306 - Special Coverage. Some vehicles, may have a condition where the rear seatbelt buckle may be difficult to unlatch or may not unlatch when pressing the release button. This condition could make it difficult for a passenger to exit the vehicle or to remove a latched child seat. Dealers are to replace the non-releasing buckle(s) and if necessary, the matching retractor(s). The repairs will be made at no charge to the customer.
Source components: SEAT BELTS.
Source record 10159267 at NHTSANHTSA communication ID: 10140293
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on Intake Manifold Inspection/Replacement After Severe Internal Engine Damage.
Source components: ENGINE AND ENGINE COOLING.
Source record 10140293 at NHTSANHTSA communication ID: 10140298
NHTSA source summary · Original PDF not reviewed by Recallfolio
The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10140298 at NHTSANHTSA communication ID: 10140406
NHTSA source summary · Original PDF not reviewed by Recallfolio
Thins informational bulletin provides information on Paint-less Dent Repair Process.
Source components: EQUIPMENT · STRUCTURE.
Source record 10140406 at NHTSANHTSA communication ID: 10137735
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician with information regarding high misfire rates always on #1 cylinder. A customer may complain of misfires or roughness on cold start up with a P0300 diagnostic trouble code. Technician is to add coolant dye to the system and run the engine through warm up to circulate the dye. Pressurize the cooling system after a cold soak and inspect the cylinder with a bore scope for coolant dye. Dye is used to identify coolant over residual fuel being that might be left in the cylinder. The technician is not to replace the cylinder head as it will not correct this concern. In some cases it is necessary to remove the head for inspection. Do not replace the engine for small surface pock marks or a pitting appearance this is normal and do not connect to coolant passages. Usually if porosity is present there will be a break in the carbon ring. Only replace the engine if true porosity is found. Technician is to call Product Quality Center with the latest version of bulletin 02-07-30-029 if porosity is found and engine replacement is required.
Source components: ENGINE AND ENGINE COOLING.
Source record 10137735 at NHTSANHTSA communication ID: 10137734
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician that Diagnostic Trouble Codes P0016, P0017, P0018, P0019, P0008 or P0009 may be set. Technician will need to inspect for loose timing chains or tensioners. If after following Service Information diagnostics the root cause is not found inspect the reluctor for the crankshaft sensor. If the reluctor has moved then replace crankshaft.
Source components: ENGINE.
Source record 10137734 at NHTSANHTSA communication ID: 10140408
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides repair information to correct a customer concern of vibration felt through the steering wheel, drivers and passengers seats or floor while vehicle in drive at idle.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION · SEATS · STEERING · SUSPENSION.
Source record 10140408 at NHTSANHTSA communication ID: 10140395
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides a procedure to repair and reposition the seat pretentioner wiring harness away from the seat frame to correct a possible short when the seat is in the full down position.
Source components: SEATS.
Source record 10140395 at NHTSANHTSA communication ID: 10140294
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin communicates part restriction and ordering process information for OnStar Vehicle Communication Interface Modules (VCIM) (GMNA Only).
Source components: ELECTRICAL SYSTEM.
Source record 10140294 at NHTSANHTSA communication ID: 10137727
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
Source components: ENGINE.
Source record 10137727 at NHTSANHTSA communication ID: 10137714
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that the keyless entry is inoperative. Technician should inspect the ignition key cylinder door sticks in the up position. If the door is found open do not replace the ignition key cylinder, use a Lubriplate type of lubrication spray and lubricate the ignition key cylinder door. Insert the tip of the key in and out to verify the door of the cylinder is not sticking.
Source components: ELECTRICAL SYSTEM:IGNITION.
Source record 10137714 at NHTSANHTSA communication ID: 10137713
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that the keyless entry is inoperative. Technician should inspect the ignition key cylinder door sticks in the up position. If the door is found open do not replace the ignition key cylinder, use a Lubriplate type of lubrication spray and lubricate the ignition key cylinder door. Insert the tip of the key in and out to verify the door of the cylinder is not sticking.
Source components: ELECTRICAL SYSTEM:IGNITION · ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:CONTROL MODULE.
Source record 10137713 at NHTSANHTSA communication ID: 10137705
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about customers that may complain of various concerns when using Bluetooth components. Technician should use the Preliminary Information to gather information from the customer on their Bluetooth device and the concern they are having before calling General Motors Technical Assistance Center.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10137705 at NHTSANHTSA communication ID: 10140296
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provide policy information on required operating procedures.
Source components: EQUIPMENT.
Source record 10140296 at NHTSANHTSA communication ID: 10140297
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provide policy information on warranty and policy exchange program for electronic products for U.S. and Canada dealers only.
Source components: EQUIPMENT.
Source record 10140297 at NHTSANHTSA communication ID: 10126081
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin explains the Road Force balancers and what they can do for customer concerns.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10126081 at NHTSANHTSA communication ID: 10126123
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides a procedure to adding new brackets and repairing the front seats to correct the seats excessive movements.
Source components: SEATS.
Source record 10126123 at NHTSANHTSA communication ID: 10126113
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on Information on How to Prevent Inadvertent Vehicle Starting from Key Fob or OnStar Mobile Application and where to locate the information for future use.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10126113 at NHTSANHTSA communication ID: 10126068
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides information on Transport Mode On Message Displayed in Driver Information Center (DIC) and/or Battery Light is Flashing and the procedures to turn the transport mode message on and off.
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY.
Source record 10126068 at NHTSANHTSA communication ID: 10126065
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provide policy information on required operating procedures.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10126065 at NHTSANHTSA communication ID: 10108645
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on the temporary tire flat spotting condition.
Source components: TIRES.
Source record 10108645 at NHTSANHTSA communication ID: 10114082
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary information communicatesIn ambient temperatures 100F (37.7 C)degrees or higher, DTCs P2635 and/or P018B may set.The vehicle may also exhibit a hesitation or stalling condition.Excessively Hot and sustained ambient temperatures over 100F (37.7 C) degrees Mainly in TX, AZ, UT, NV, CA, NM (could be any state) causingVapor buildup in fuel feed line.Customers can be advised to utilize fuels with octane levels greater than 91, Refrain from extended idleing periods if possible, park vehicles in covered garage.Replacing the fuel pump will not repare this concern.
Source components: FUEL SYSTEM, GASOLINE · FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP.
Source record 10114082 at NHTSANHTSA communication ID: 10108626
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides warranty policy information on revised wiring repair labor operations and required additional information.
Source components: ELECTRICAL SYSTEM:WIRING.
Source record 10108626 at NHTSANHTSA communication ID: 10108625
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides warranty policy information on revised wiring repair labor operations and required additional information.
Source components: ENGINE · EQUIPMENT.
Source record 10108625 at NHTSANHTSA communication ID: 10114077
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides the technician with information on the proper washing of the bright aluminum moldings to avoid the moldings from getting damaged. It is recommended that a non-alkaline solution be used for preparation & washing of the bright aluminum moldings.
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10114077 at NHTSANHTSA communication ID: 10114072
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about the rear view camera options on the vehicles equipped with rear view camera. The rear view camera brightness can be adjusted on some models while the transmission is in reverse and using the Menu or Select button. To turn off or on the guidelines in the rear view camera, use the radio display Config icon then Display, then the guidelines option.
Source components: BACK OVER PREVENTION: CAMERA SYSTEM · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10114072 at NHTSANHTSA communication ID: 10126094
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides a procedure to replace the horn due to water intrusion causing a weak, not clear, abnormal and/or is inoperative.
Source components: ELECTRICAL SYSTEM:HORN.
Source record 10126094 at NHTSANHTSA communication ID: 10114071
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary information communicatesIn ambient temperatures 100F (37.7 C)degrees or higher, DTCs P2635 and/or P018B may set.The vehicle may also exhibit a hesitation or stalling condition.Excessively Hot and sustained ambient temperatures over 100F (37.7 C) degrees Mainly in TX, AZ, UT, NV, CA, NM (could be any state) causingVapor buildup in fuel feed line.Customers can be advised to utilize fuels with octane levels greater than 91, Refrain from extended idleing periods if possible, park vehicles in covered garage.Replacing the fuel pump will not repare this concern.
Source components: FUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP.
Source record 10114071 at NHTSANHTSA communication ID: 10118290
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary information communicatesIn ambient temperatures 100F (37.7 C)degrees or higher, DTCs P2635 and/or P018B may set.The vehicle may also exhibit a hesitation or stalling condition.Excessively Hot and sustained ambient temperatures over 100F (37.7 C) degrees Mainly in TX, AZ, UT, NV, CA, NM (could be any state) causingVapor buildup in fuel feed line.Customers can be advised to utilize fuels with octane levels greater than 91, Refrain from extended idleing periods if possible, park vehicles in covered garage.Replacing the fuel pump will not repare this concern.
Source components: EQUIPMENT.
Source record 10118290 at NHTSANHTSA communication ID: 10118256
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician on the programming and activation of the OnStar system. For many 2008 and prior model year GM vehicles, the programming is performed using the Tech 2 and the activation is initiated by a Service Programming System. For the 2010 and UP model year vehicles, the OnStar set-up procedure and OnStar Activation request have been combined into a single programming event called OnStar Set-up and Activation in Service Programming System.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10118256 at NHTSANHTSA communication ID: 10118250
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a knock noise, seized engine, lower end squeak or squeal from the engine. Technician will inspect the oil control solenoids for metal debris. Also inspect for damage to the cam caps Journals and camshaft journals on the heads. The check the timing chain idler sprockets for stiffness when turning. If any of these instances would be a cause to replace the engine instead of repair.
Source components: ENGINE.
Source record 10118250 at NHTSANHTSA communication ID: 10118244
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a ticking noise on cold start after sitting more than 6 hours. Technician will inspect the oil pump pick-up tube to block seal being compressed. It the seal is compressed replace the seal and retest.
Source components: ELECTRICAL SYSTEM:STARTER ASSEMBLY.
Source record 10118244 at NHTSANHTSA communication ID: 10118233
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about installing General Motors Accessory pats. Technician can check Service Information for some accessories. Technician can also contact Partect for assistance. Technician can also contact Techline Customer Support Center for programming issues.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10118233 at NHTSANHTSA communication ID: 10137665
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin explains the Road Force balancers and what they can do for customer concerns.
Source components: EQUIPMENT.
Source record 10137665 at NHTSANHTSA communication ID: 10137600
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on Chemical Staining, Pitting, Corrosion and/or Spotted Appearance of Chromed Aluminum Wheels.
Source components: WHEELS.
Source record 10137600 at NHTSANHTSA communication ID: 10137680
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides information regarding the normal characteristic of instrument panel red brake light intermittently comes on.
Source components: PARKING BRAKE.
Source record 10137680 at NHTSANHTSA communication ID: 10137601
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin advises the possible issues that may occur using a scotch brite pad or highly abrasive disk on engine surfaces.
Source components: ENGINE.
Source record 10137601 at NHTSANHTSA communication ID: 10137605
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on General Motors Dealership Critical Equipment Requirements and Recommendations.
Source components: EQUIPMENT.
Source record 10137605 at NHTSANHTSA communication ID: 10137653
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin explains the difference in oil filters and the possibilities of what may happen using the incorrect filter.
Source components: ENGINE · EQUIPMENT.
Source record 10137653 at NHTSANHTSA communication ID: 10137640
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provide policy information for automatic transmission Oil Cooler Flush and flow test.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10137640 at NHTSANHTSA communication ID: 10137635
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin advises of a new fuel injection kit used for decarbonizing the intake valves, and explains how toptier fuels should be used to reduce carbon build up.
Source components: EQUIPMENT · FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:INJECTORS.
Source record 10137635 at NHTSANHTSA communication ID: 10137650
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides a procedure to replace the side object detection wiring and harness if inspection finds water and/or corrosion in the harness or modules.
Source components: ELECTRICAL SYSTEM.
Source record 10137650 at NHTSANHTSA communication ID: 10137602
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides the dealership with how to prep a vehicle for delivery to the customer to aid in higher CSi scores.
Source components: EQUIPMENT.
Source record 10137602 at NHTSANHTSA communication ID: 10137603
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provide policy information on required operating procedures.
Source components: EQUIPMENT.
Source record 10137603 at NHTSANHTSA communication ID: 10113978
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provides information on Dealer Empowerment Labor Operations and Customer Enthusiasm.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10113978 at NHTSANHTSA communication ID: 10114042
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides repair information to correct a customer concern of hearing a noise from the vehicle cowl area while wipers are in operation.
Source components: VISIBILITY/WIPER.
Source record 10114042 at NHTSANHTSA communication ID: 10114051
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides information regarding the normal characteristic of instrument panel red brake light intermittently comes on.
Source components: EXTERIOR LIGHTING:BRAKE LIGHTS.
Source record 10114051 at NHTSANHTSA communication ID: 10114027
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on Non-Design Intent Wheel Lock Nuts and Lug Nuts.
Source components: WHEELS:LUGS/NUTS/BOLTS/STUDS.
Source record 10114027 at NHTSANHTSA communication ID: 10113997
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides a procedure to check the X2 or PPS sensor mat terminal connector for loose connections that may cause the airbag warning message to come on.
Source components: AIR BAGS.
Source record 10113997 at NHTSANHTSA communication ID: 10114023
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides information on a possible incorrect wiring from the ANC module which is causing a louder boom noise in the cabin.
Source components: ELECTRICAL SYSTEM:WIRING.
Source record 10114023 at NHTSANHTSA communication ID: 10113993
NHTSA source summary · Original PDF not reviewed by Recallfolio
this informational bulletin provides Information on Using MyBuick, MyCadillac, MyChevrolet, and MyGMC Phone Applications to Control GM Accessory Remote Start Kits.
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10113993 at NHTSANHTSA communication ID: 10114048
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10114048 at NHTSANHTSA communication ID: 10114014
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides repair information to correct a customer concern that radio will not turn on or function.
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10114014 at NHTSANHTSA communication ID: 10113977
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on proper use of floor mats.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10113977 at NHTSANHTSA communication ID: 10113976
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements.
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY.
Source record 10113976 at NHTSANHTSA communication ID: 10138086
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operations.
Source components: SUSPENSION.
Source record 10138086 at NHTSANHTSA communication ID: 10138071
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides a procedure to Complete the Circuit/System Verification steps to correct a condition of Malfunction Indicator Lamp (MIL) - Check Engine Light On, DTC P182E.
Source components: ENGINE AND ENGINE COOLING.
Source record 10138071 at NHTSANHTSA communication ID: 10138021
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides a procedure for reprogramming power steering control module due to a notchy or stick/slip feeling in the steering wheel near the center position.
Source components: STEERING.
Source record 10138021 at NHTSA