The manufacturer’s record · Page 8 of 19
Original record summaries, dates and identifiers for this model-year. Records 701–800 of 1,810, ordered newest first. Dated records on this page: Jan 17, 2017–Sep 19, 2017.
Back to 2014 Buick LACROSSE problems & recallsThis archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
NHTSA communication ID: 10159613
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information for programming the low speed LAN module due to the mirrors memory position reverse tilt position is inoperative.
Source components: ELECTRICAL SYSTEM.
Source record 10159613 at NHTSANHTSA communication ID: 10157015
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication informs dealer technicians of a potential whining noise that can occur after servicing the water pump, water pump chain or cylinder head without use of the water pump sprocket holding tool. Dealers are advised this condition is the result of a water pump chain tensioner ratcheting out. The dealer is directed to follow service information to reset the water pump chain tensioner to correct.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10157015 at NHTSANHTSA communication ID: 10159575
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty admin bulletin explains to the technician additional information may be needed when submitting transactions when doing wiring repairs.
Source components: ELECTRICAL SYSTEM:WIRING.
Source record 10159575 at NHTSANHTSA communication ID: 10159572
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin explains the importance of maintaining the vehicle.
Source components: EQUIPMENT.
Source record 10159572 at NHTSANHTSA communication ID: 10159569
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin advises the possible issues that may occur using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
Source components: ENGINE AND ENGINE COOLING · EQUIPMENT.
Source record 10159569 at NHTSANHTSA communication ID: 10156999
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · EQUIPMENT:ELECTRICAL.
Source record 10156999 at NHTSANHTSA communication ID: 10156990
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts/kits. Technicians should refer to Service Information for information regarding most accessories. Technicians may also contact Partech and/or the Techline Customer Support Center for additional support.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10156990 at NHTSANHTSA communication ID: 10159574
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
Source components: ENGINE.
Source record 10159574 at NHTSANHTSA communication ID: 10140293
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on Intake Manifold Inspection/Replacement After Severe Internal Engine Damage.
Source components: ENGINE AND ENGINE COOLING.
Source record 10140293 at NHTSANHTSA communication ID: 10140298
NHTSA source summary · Original PDF not reviewed by Recallfolio
The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10140298 at NHTSANHTSA communication ID: 10140406
NHTSA source summary · Original PDF not reviewed by Recallfolio
Thins informational bulletin provides information on Paint-less Dent Repair Process.
Source components: EQUIPMENT · STRUCTURE.
Source record 10140406 at NHTSANHTSA communication ID: 10137737
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician that Diagnostic Trouble Code B127E in the Human Machine Interface with Regular Production Option Code U42 or UWG will be current when playing a DVD or Blu-Ray on the Integrated Center Stack display. When the disc is ejected the Diagnostic Trouble Code will be history. If the Diagnostic Trouble Code B127E remains current after ejecting the disc follow Service Information diagnostic procedure instructions for B127E with Regular Production Option Code U42 or UWG.
Source components: EQUIPMENT · EQUIPMENT:ELECTRICAL · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10137737 at NHTSANHTSA communication ID: 10137735
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician with information regarding high misfire rates always on #1 cylinder. A customer may complain of misfires or roughness on cold start up with a P0300 diagnostic trouble code. Technician is to add coolant dye to the system and run the engine through warm up to circulate the dye. Pressurize the cooling system after a cold soak and inspect the cylinder with a bore scope for coolant dye. Dye is used to identify coolant over residual fuel being that might be left in the cylinder. The technician is not to replace the cylinder head as it will not correct this concern. In some cases it is necessary to remove the head for inspection. Do not replace the engine for small surface pock marks or a pitting appearance this is normal and do not connect to coolant passages. Usually if porosity is present there will be a break in the carbon ring. Only replace the engine if true porosity is found. Technician is to call Product Quality Center with the latest version of bulletin 02-07-30-029 if porosity is found and engine replacement is required.
Source components: ENGINE AND ENGINE COOLING.
Source record 10137735 at NHTSANHTSA communication ID: 10137734
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician that Diagnostic Trouble Codes P0016, P0017, P0018, P0019, P0008 or P0009 may be set. Technician will need to inspect for loose timing chains or tensioners. If after following Service Information diagnostics the root cause is not found inspect the reluctor for the crankshaft sensor. If the reluctor has moved then replace crankshaft.
Source components: ENGINE.
Source record 10137734 at NHTSANHTSA communication ID: 10140294
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin communicates part restriction and ordering process information for OnStar Vehicle Communication Interface Modules (VCIM) (GMNA Only).
Source components: ELECTRICAL SYSTEM.
Source record 10140294 at NHTSANHTSA communication ID: 10137727
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
Source components: ENGINE.
Source record 10137727 at NHTSANHTSA communication ID: 10140373
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides to the technician, locations to check for possible loose or damaged electrical connections that may set a DTC instead of just replacing a part.
Source components: ELECTRICAL SYSTEM.
Source record 10140373 at NHTSANHTSA communication ID: 10137714
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that the keyless entry is inoperative. Technician should inspect the ignition key cylinder door sticks in the up position. If the door is found open do not replace the ignition key cylinder, use a Lubriplate type of lubrication spray and lubricate the ignition key cylinder door. Insert the tip of the key in and out to verify the door of the cylinder is not sticking.
Source components: ELECTRICAL SYSTEM:IGNITION.
Source record 10137714 at NHTSANHTSA communication ID: 10137713
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that the keyless entry is inoperative. Technician should inspect the ignition key cylinder door sticks in the up position. If the door is found open do not replace the ignition key cylinder, use a Lubriplate type of lubrication spray and lubricate the ignition key cylinder door. Insert the tip of the key in and out to verify the door of the cylinder is not sticking.
Source components: ELECTRICAL SYSTEM:IGNITION · ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:CONTROL MODULE.
Source record 10137713 at NHTSANHTSA communication ID: 10137705
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about customers that may complain of various concerns when using Bluetooth components. Technician should use the Preliminary Information to gather information from the customer on their Bluetooth device and the concern they are having before calling General Motors Technical Assistance Center.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10137705 at NHTSANHTSA communication ID: 10140296
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provide policy information on required operating procedures.
Source components: EQUIPMENT.
Source record 10140296 at NHTSANHTSA communication ID: 10140297
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provide policy information on warranty and policy exchange program for electronic products for U.S. and Canada dealers only.
Source components: EQUIPMENT.
Source record 10140297 at NHTSANHTSA communication ID: 10126081
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin explains the Road Force balancers and what they can do for customer concerns.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10126081 at NHTSANHTSA communication ID: 10126113
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on Information on How to Prevent Inadvertent Vehicle Starting from Key Fob or OnStar Mobile Application and where to locate the information for future use.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10126113 at NHTSANHTSA communication ID: 10126068
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides information on Transport Mode On Message Displayed in Driver Information Center (DIC) and/or Battery Light is Flashing and the procedures to turn the transport mode message on and off.
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY.
Source record 10126068 at NHTSANHTSA communication ID: 10126065
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provide policy information on required operating procedures.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10126065 at NHTSANHTSA communication ID: 10108645
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on the temporary tire flat spotting condition.
Source components: TIRES.
Source record 10108645 at NHTSANHTSA communication ID: 10114082
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary information communicatesIn ambient temperatures 100F (37.7 C)degrees or higher, DTCs P2635 and/or P018B may set.The vehicle may also exhibit a hesitation or stalling condition.Excessively Hot and sustained ambient temperatures over 100F (37.7 C) degrees Mainly in TX, AZ, UT, NV, CA, NM (could be any state) causingVapor buildup in fuel feed line.Customers can be advised to utilize fuels with octane levels greater than 91, Refrain from extended idleing periods if possible, park vehicles in covered garage.Replacing the fuel pump will not repare this concern.
Source components: FUEL SYSTEM, GASOLINE · FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP.
Source record 10114082 at NHTSANHTSA communication ID: 10108641
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides warranty policy information on required operating procedures.
Source components: EQUIPMENT.
Source record 10108641 at NHTSANHTSA communication ID: 10108627
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides warranty policy information on revised wiring repair labor operations and required additional information.
Source components: ENGINE · EQUIPMENT.
Source record 10108627 at NHTSANHTSA communication ID: 10108625
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides warranty policy information on revised wiring repair labor operations and required additional information.
Source components: ENGINE · EQUIPMENT.
Source record 10108625 at NHTSANHTSA communication ID: 10114072
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about the rear view camera options on the vehicles equipped with rear view camera. The rear view camera brightness can be adjusted on some models while the transmission is in reverse and using the Menu or Select button. To turn off or on the guidelines in the rear view camera, use the radio display Config icon then Display, then the guidelines option.
Source components: BACK OVER PREVENTION: CAMERA SYSTEM · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10114072 at NHTSANHTSA communication ID: 10114071
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary information communicatesIn ambient temperatures 100F (37.7 C)degrees or higher, DTCs P2635 and/or P018B may set.The vehicle may also exhibit a hesitation or stalling condition.Excessively Hot and sustained ambient temperatures over 100F (37.7 C) degrees Mainly in TX, AZ, UT, NV, CA, NM (could be any state) causingVapor buildup in fuel feed line.Customers can be advised to utilize fuels with octane levels greater than 91, Refrain from extended idleing periods if possible, park vehicles in covered garage.Replacing the fuel pump will not repare this concern.
Source components: FUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP.
Source record 10114071 at NHTSANHTSA communication ID: 10118290
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary information communicatesIn ambient temperatures 100F (37.7 C)degrees or higher, DTCs P2635 and/or P018B may set.The vehicle may also exhibit a hesitation or stalling condition.Excessively Hot and sustained ambient temperatures over 100F (37.7 C) degrees Mainly in TX, AZ, UT, NV, CA, NM (could be any state) causingVapor buildup in fuel feed line.Customers can be advised to utilize fuels with octane levels greater than 91, Refrain from extended idleing periods if possible, park vehicles in covered garage.Replacing the fuel pump will not repare this concern.
Source components: EQUIPMENT.
Source record 10118290 at NHTSANHTSA communication ID: 10118256
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician on the programming and activation of the OnStar system. For many 2008 and prior model year GM vehicles, the programming is performed using the Tech 2 and the activation is initiated by a Service Programming System. For the 2010 and UP model year vehicles, the OnStar set-up procedure and OnStar Activation request have been combined into a single programming event called OnStar Set-up and Activation in Service Programming System.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10118256 at NHTSANHTSA communication ID: 10118250
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a knock noise, seized engine, lower end squeak or squeal from the engine. Technician will inspect the oil control solenoids for metal debris. Also inspect for damage to the cam caps Journals and camshaft journals on the heads. The check the timing chain idler sprockets for stiffness when turning. If any of these instances would be a cause to replace the engine instead of repair.
Source components: ENGINE.
Source record 10118250 at NHTSANHTSA communication ID: 10118244
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a ticking noise on cold start after sitting more than 6 hours. Technician will inspect the oil pump pick-up tube to block seal being compressed. It the seal is compressed replace the seal and retest.
Source components: ELECTRICAL SYSTEM:STARTER ASSEMBLY.
Source record 10118244 at NHTSANHTSA communication ID: 10118233
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about installing General Motors Accessory pats. Technician can check Service Information for some accessories. Technician can also contact Partect for assistance. Technician can also contact Techline Customer Support Center for programming issues.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10118233 at NHTSANHTSA communication ID: 10137665
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin explains the Road Force balancers and what they can do for customer concerns.
Source components: EQUIPMENT.
Source record 10137665 at NHTSANHTSA communication ID: 10137600
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on Chemical Staining, Pitting, Corrosion and/or Spotted Appearance of Chromed Aluminum Wheels.
Source components: WHEELS.
Source record 10137600 at NHTSANHTSA communication ID: 10137680
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides information regarding the normal characteristic of instrument panel red brake light intermittently comes on.
Source components: PARKING BRAKE.
Source record 10137680 at NHTSANHTSA communication ID: 10137601
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin advises the possible issues that may occur using a scotch brite pad or highly abrasive disk on engine surfaces.
Source components: ENGINE.
Source record 10137601 at NHTSANHTSA communication ID: 10137605
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on General Motors Dealership Critical Equipment Requirements and Recommendations.
Source components: EQUIPMENT.
Source record 10137605 at NHTSANHTSA communication ID: 10137653
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin explains the difference in oil filters and the possibilities of what may happen using the incorrect filter.
Source components: ENGINE · EQUIPMENT.
Source record 10137653 at NHTSANHTSA communication ID: 10137640
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provide policy information for automatic transmission Oil Cooler Flush and flow test.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10137640 at NHTSANHTSA communication ID: 10137635
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin advises of a new fuel injection kit used for decarbonizing the intake valves, and explains how toptier fuels should be used to reduce carbon build up.
Source components: EQUIPMENT · FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:INJECTORS.
Source record 10137635 at NHTSANHTSA communication ID: 10137602
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides the dealership with how to prep a vehicle for delivery to the customer to aid in higher CSi scores.
Source components: EQUIPMENT.
Source record 10137602 at NHTSANHTSA communication ID: 10137603
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provide policy information on required operating procedures.
Source components: EQUIPMENT.
Source record 10137603 at NHTSANHTSA communication ID: 10113978
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provides information on Dealer Empowerment Labor Operations and Customer Enthusiasm.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10113978 at NHTSANHTSA communication ID: 10114051
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides information regarding the normal characteristic of instrument panel red brake light intermittently comes on.
Source components: EXTERIOR LIGHTING:BRAKE LIGHTS.
Source record 10114051 at NHTSANHTSA communication ID: 10114027
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on Non-Design Intent Wheel Lock Nuts and Lug Nuts.
Source components: WHEELS:LUGS/NUTS/BOLTS/STUDS.
Source record 10114027 at NHTSANHTSA communication ID: 10113993
NHTSA source summary · Original PDF not reviewed by Recallfolio
this informational bulletin provides Information on Using MyBuick, MyCadillac, MyChevrolet, and MyGMC Phone Applications to Control GM Accessory Remote Start Kits.
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10113993 at NHTSANHTSA communication ID: 10114048
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10114048 at NHTSANHTSA communication ID: 10113977
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on proper use of floor mats.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10113977 at NHTSANHTSA communication ID: 10113976
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements.
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY.
Source record 10113976 at NHTSANHTSA communication ID: 10138086
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operations.
Source components: SUSPENSION.
Source record 10138086 at NHTSANHTSA communication ID: 10138071
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides a procedure to Complete the Circuit/System Verification steps to correct a condition of Malfunction Indicator Lamp (MIL) - Check Engine Light On, DTC P182E.
Source components: ENGINE AND ENGINE COOLING.
Source record 10138071 at NHTSANHTSA communication ID: 10138021
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides a procedure for reprogramming power steering control module due to a notchy or stick/slip feeling in the steering wheel near the center position.
Source components: STEERING.
Source record 10138021 at NHTSANHTSA communication ID: 10138019
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information for the GM of Canada OnStar Cellular Communication Upgrade to 3G/4G LTE for vehicles that may need an upgrade.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10138019 at NHTSANHTSA communication ID: 10138032
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin aids the technician on diagnosing possible vibrations in a vehicle, methods used for testing each scenario and documenting findings. This technical bulletin provides a procedure to install dust deflectors when replacing wheel bearings on vehicles no matter what the concern is of the vehicle. This technical bulletin provides a procedure to reprogram the TRCM to correct the customers concern of the Service Transmission and MIL on. This technical bulletin provides a procedure to reprogram the FVCM if the battery has issues that are related to the front camera module.
Source components: WHEELS.
Source record 10138032 at NHTSANHTSA communication ID: 10138087
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary information bulletin provides information for diagnosing a power steering fluid leak at the fluid reservoir.
Source components: STEERING.
Source record 10138087 at NHTSANHTSA communication ID: 10138095
NHTSA source summary · Original PDF not reviewed by Recallfolio
This engineering information bulletin ends the need for information from the field on vehicles that have the concern of a noisy water pump.
Source components: ENGINE AND ENGINE COOLING:COOLING SYSTEM.
Source record 10138095 at NHTSANHTSA communication ID: 10138060
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provides policy information with the field action courtesy transportation policy.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10138060 at NHTSANHTSA communication ID: 10138025
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear.
Source components: STEERING.
Source record 10138025 at NHTSANHTSA communication ID: 10138054
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on On rare occasions, a security code input message with SPS error code E5659, M5304, and/or M5530 may be displayed in TIS2web when the technician is programming any module. If this concern is encountered, the technician should start by ensuring that the module being programmed is not a used module and that the VIN matches on VIN plate, TIS2web programming screen, and GDS2 module identification information screen.
Source components: ELECTRICAL SYSTEM.
Source record 10138054 at NHTSANHTSA communication ID: 10138053
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provide policy information for automatic transmission Oil Cooler Flush and flow test.
Source components: POWER TRAIN.
Source record 10138053 at NHTSANHTSA communication ID: 10138014
NHTSA source summary · Original PDF not reviewed by Recallfolio
This information bulletin explains the labor operation numbers used for submitting warranty claims and how to setup, and reprogram modules.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10138014 at NHTSANHTSA communication ID: 10116590
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin explains not to put anything metal or conductive on the passenger seat or it may set the reminder chime off.
Source components: SEATS.
Source record 10116590 at NHTSANHTSA communication ID: 10116589
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information for dealers how to submit a product information report.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10116589 at NHTSANHTSA communication ID: 10113456
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10113456 at NHTSANHTSA communication ID: 10113454
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to help the dealership technicians perform a parasitic drain test for the OnStar module. When performing battery parasitic drain test, there may be some confusion as to what the normal power consumption reading should be from the OnStar system.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10113454 at NHTSANHTSA communication ID: 10116637
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Informational bulletin outlines the recommendations for aluminum and chrome wheel refinishing.
Source components: WHEELS.
Source record 10116637 at NHTSANHTSA communication ID: 10113446
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have the 12V Battery is discharged with a Service Charging System Message, a Malfunction Indicator Lamp and Red Battery Light on.
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10113446 at NHTSANHTSA communication ID: 10113444
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles with the service engine soon lamp that comes on. Technician may find Diagnostic Trouble Code U0101. Technician should review the appropriate Service Information diagnostics for DTC U0101. Also gather all other diagnostic trouble codes in the vehicle and which modules they are set in. The transmission connector pins should be checked for damaged terminals or poor terminal fit. Also inspect the under hood fuse block for damaged terminals or poor terminal fit and mis-positioned fuses in fuse block. Inspect the ground for the Transmission Control Module. Technician should refer to Service Information automatic transmission controls schematics to determine the ground identification.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10113444 at NHTSANHTSA communication ID: 10113443
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10113443 at NHTSANHTSA communication ID: 10113442
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon and may also have an oil or coolant leak. Technician may find coolant or oil in a spark plug tube. If the Spark Plug Tube is leaking and it is determined that the oil or coolant is not coming from a leak above the spark plug then replace the cylinder Head, spark plug and coil.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING.
Source record 10113442 at NHTSANHTSA communication ID: 10116605
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Bulletin provides guidelines for Dealers required to contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10116605 at NHTSANHTSA communication ID: 10116633
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides information on how to properly clean wheel speed sensors and wheel bearings that may cause conditions of EBCM Wheel Speed Sensor Diagnostic Aid for ABS Message -Click Or Ratchet Noise- Service Traction Message - Service Stabilitrak Message - Service Steering Message due to dirt and debris.
Source components: STEERING · WHEELS.
Source record 10116633 at NHTSANHTSA communication ID: 10113438
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicle that has no XM audio on certain channels but XM channel info is displayed. Technician will need to contact XM and deactivate and activate the module.
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10113438 at NHTSANHTSA communication ID: 10113437
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have an OnStar Turn-By-Turn Navigation the system that is inoperative. Technician verifies there are no Diagnostic Trouble Codes are present in the Antilock Braking System and Vehicle Communication Interface Module of the vehicle. If no Diagnostic Trouble Codes found call OnStar using the Blue button on the OnStar key pad and ask the advisor for a turn by turn route. Also make a OnStar personal call and a call into the vehicle. If normal diagnostics do not lead to a resolution technician will need to call General Motors Technical Assistance Center for further assistance.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10113437 at NHTSANHTSA communication ID: 10113436
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician the steps needed to diagnose and repair the vehicles that may have unwanted or phantom phone calls. Technician will need to determine what type of call the customer is having that is unwanted. The vehicle may receive an incoming call just like any other phone. Typically the customer will hear the phone ringing in the vehicle. This scenario also includes incoming Bluetooth calls. One type of unwanted call can be made if the key pad is faulty the OnStar system will try to make a blue button call for shorted voltage in the circuits. The OnStar module could have an internal fault and produce a ″Phone Unavailable″ audio message also it may have a Diagnostic Trouble Code U1500 or B1000. Refer to diagnostics for the Diagnostic Trouble Code making sure to follow any applicable Bulletins or Preliminary Information sheets. A “Ready” or “OnStar ready” audio message heard while driving. In some cases it has been found that the customer is inadvertently pressing the ″push to talk″ button on the steering wheel controls. On rare occasions, other issues in the steering column or Steering Wheel Control system may induce this concern.
Source components: ELECTRICAL SYSTEM:SOFTWARE · STEERING.
Source record 10113436 at NHTSANHTSA communication ID: 10113383
NHTSA source summary · Original PDF not reviewed by Recallfolio
44180 02 - Customer Satisfaction. Certain vehicles may have key codes which were inappropriately handled by a third party which could increase the risk of vehicle theft. Dealers are to replace all applicable keys and lock cylinders with new key configurations.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10113383 at NHTSANHTSA communication ID: 10116606
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides a procedure to install dust deflectors when replacing wheel bearings on vehicles no matter what the concern is of the vehicle.
Source components: WHEELS.
Source record 10116606 at NHTSANHTSA communication ID: 10113427
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician on the programming and activation of the OnStar system. For many 2008 and prior model year GM vehicles, the programming is performed using the Tech 2 and the activation is initiated by a Service Programming System. For the 2010 and UP model year vehicles, the OnStar set-up procedure and OnStar Activation request have been combined into a single programming event called OnStar Set-up and Activation in Service Programming System.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10113427 at NHTSANHTSA communication ID: 10116585
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information for dealers/technicians on when and how to submit a field product report.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10116585 at NHTSANHTSA communication ID: 10113425
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information on a rattle, tick, or knock type noise. Any drivability concerns they should be addressed prior to the following diagnostic progression. A sound file or video with sound of the noise needs to be made prior to dis-assembly to help isolate to one area in the engine. There are four different steps to diagnosis the concern. This communication was updated to include the 2017 model year.
Source components: ENGINE.
Source record 10113425 at NHTSANHTSA communication ID: 10116591
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on Installing the Correct Replacement Spin-On Oil Filter When Servicing.
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10116591 at NHTSANHTSA communication ID: 10116587
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on Clicking/Ticking Sound/Noise Heard During Cold Start and that this should be considered a normal characteristic.
Source components: ENGINE.
Source record 10116587 at NHTSANHTSA communication ID: 10116584
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin contains information for the new tires that the vehicle is equipped with and that they are covered by General Motors against defects in material or workmanship under the New Vehicle Warranty (Base Warranty Coverage). For vehicles within this warranty period, defective tires will be replaced on a pro rata adjustment basis according to the published distance-based schedule.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10116584 at NHTSANHTSA communication ID: 10113418
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a Malfunction Indicator Lamp on or engine misfire, rough idle, extended crank, or crank no start in some cases. Technician will need to perform published Service Information diagnostics. If technician finds carbon, an upper engine and valve cleaning should be performed. Update added part numbers for the cleaner and model years.
Source components: ENGINE.
Source record 10113418 at NHTSANHTSA communication ID: 10113416
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vibration complaints that are one of the most challenging complaints to accurately diagnose and repair. Technician will need to use Pico Oscilloscope Diagnostic Kit to effectively diagnosis vehicles. Technician should drive the vehicle will using the Pico Oscilloscope to record data. After the data is recorded it should be reviewed to determine the root cause of the concern. If a repair attempt made the concern better but not eliminated or had no affect at all, and are requesting assistance from General Motors Technical Assistance Center record another Pico file and save it to the computer. After the new Pico Oscilloscope data has been saved email the data to General Motors Technical Assistance Center in the subject line include “Vibration” “Business Associate Code” and the last 8 of the Vehicle Identification Number.
Source components: EQUIPMENT.
Source record 10113416 at NHTSANHTSA communication ID: 10113413
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10113413 at NHTSANHTSA communication ID: 10116623
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides a procedure to replace the garage door opener transmitter to correct a condition of poor range for the garage door opener.
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10116623 at NHTSANHTSA communication ID: 10116596
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear.
Source components: STEERING.
Source record 10116596 at NHTSANHTSA communication ID: 10113363
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician on the steps to diagnose the concern, and the steps to repair the concern of Diagnostic Trouble Code P228C setting. The technician is to inspect the fuel and readings for the High Pressure Fuel Pump. The technician is to drain and clean fuel tank and all lines if contamination is found. The technician is to replace the high pressure fuel pump and the fuel inlet line to the high pressure fuel pump. The dealer is to request the customer complete the fuel survey attached and send to the fuel system engineer at the e-mail address provided. Latest revision added model years to the PI with no other changes.
Source components: FUEL SYSTEM, GASOLINE · FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP.
Source record 10113363 at NHTSANHTSA communication ID: 10116540
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provides policy information on Causal Part requirements for transactions submitted to GM for payment.
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10116540 at NHTSANHTSA communication ID: 10116547
NHTSA source summary · Original PDF not reviewed by Recallfolio
this informational bulletin provides Information on Using MyBuick, MyCadillac, MyChevrolet, and MyGMC Phone Applications to Control GM Accessory Remote Start Kits.
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10116547 at NHTSANHTSA communication ID: 10113338
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have hard start, extended crank, or black smoke from the exhaust when starting. Technician will need to perform fuel quality test, spark test, and a compression test. Technician should also install a vacuum gauge prior to cold start and watch needle for signs of a sticking valve. Technician will need to review the latest version of PIP5029 and perform a cold compression test if the concern is only a Hard Start Cold.
Source components: ENGINE AND ENGINE COOLING · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
Source record 10113338 at NHTSANHTSA communication ID: 10116537
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides a procedure on how to clean and resurface wheel bead seats. for vehicles that have the condition of Tire Slowly Goes Flat, Tire Air Loss, Low Tire Pressure Warning Light Illuminated, Aluminum Wheel Bead Seat Corrosion (Clean and Resurface Wheel Bead Seat)
Source components: TIRES.
Source record 10116537 at NHTSANHTSA communication ID: 10116538
NHTSA source summary · Original PDF not reviewed by Recallfolio
This technical bulletin provides information on Transport Mode On Message Displayed in Driver Information Center (DIC) and/or Battery Light is Flashing and the procedures to turn the transport mode message on and off.
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY.
Source record 10116538 at NHTSA