Original record summaries, dates and identifiers for this model-year. Records 1,201–1,300 of 1,810, ordered newest first. Dated records on this page: Nov 1, 2014–Feb 24, 2015.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Feb 24, 2015Service Bulletin/Repair Instructions
05-06-04-060A
NHTSA communication ID: 10113571
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin communicates Information to technicians on control module Diagnostic Trouble Code(s) (DTC)(s) P0601, P0602, P0603, P0604, P0606, P062F, P06F3, P1621 which can be shared in multiple modules.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that the Navigation radio does not have a global positioning system location but OnStar is able to accurately locate the vehicle. Technician should check the installation of the COAX cables to be router correctly. Technician will gain access to the Radio or Human Machine Interface depending on the vehicle build. Install the EL-50334 test antenna to the Radio HMI and evaluate the operation. If the GPS signal is restored, inspect for incorrect coax routing as described above and if found, reroute the cable so it does not bypass the splitter.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides radio programming information to correct customer concerns about no XM on start-up when manually tuned and/or using voice recognition, no radio wake-up, rear view camera and OnStar handsfree calling issues, favorite stations stored twice and/or disappear.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have a Diagnostic Trouble Code B101D sym 39 in the Human Machine Interface. Technician should not replace any parts for this concern.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that are travelling from Canada to the United States. While in the United States they are unable to receive Turn-by-Turn directions. Due to the existing cellular provider not having roaming agreements in areas outside of Canada to support transmitting of the packet data required for Turn-By-Turn feature to operate. The customer has 3 options while traveling through the United Sates. First if the vehicle is equipped with a navigation radio they can request a "Destination Download" to the vehicle. Second if the customer uses the OnStar RemoteLink app they can send the directions to the vehicle. The third option would be to have the vehicle loaded with a "500 phone number" The customer will no longer be able to use their Hands Free Calling minutes when the new 500 phone number is loaded. If a customer chooses to restore Hands Free Calling in the future a new phone number will be assigned to the vehicle; previous phone numbers are not available.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician about vehicles that have an inoperative CD player. Technician should contact General Motors Technical Assistance Center if the concern is current and within four hours of the dealership. For dealers outside of this area, diagnose and repair as necessary.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin communicates comprehensive instructions to GM Dealers and authorized GM Accessory Distributor/Installers as to the proper methods for mounting, balancing, and installing accessory wheels and tires.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have a no crank concern with a fob program message displayed. The customer may indicate at times after unlocking the vehicle using the unlock button on the key fob, they enter the vehicle and depress the start button and the vehicle does not respond. If this concern is duplicated the technician should exit and lock the vehicle. Wait 5 minutes, depress the unlock button on either fob 3-5 times within 10 seconds, and then enter the vehicle. Technician will find that the vehicle will not crank and a message may display on the Driver Information Center ?! Remote Learn Pending Please Wait? or ?Ready For Fob Three? there will be no other response from the vehicle. If either message is displayed or the customer has commented on a similar concern, use the key to check the rotation of the driver?s door lock cylinder. If the key rotates further when unlocking then the normal 90 degrees, the vehicle may have been assembled with the incorrect door lock cylinder to latch rod. Technician will replace the incorrect rod.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides information regarding the normal characteristic of instrument panel red brake light intermittently comes on.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician what to inspect if codes P0016 and/or P0017 are setting on a properly timed engine or a condition of the vehicle cranks but will not start. Technician should inspect the respective intake or exhaust camshaft reluctor to see if it has spun on the camshaft. The reluctor cannot be repositioned so the camshaft must be replaced. The new camshafts come with the reluctor already pressed on in the correct position.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provides information to clarify proper transaction administration of GM Dealer Empowerment Program and Goodwill Cases.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides repair information to correct a customer concern of fuel gauge does not read full, only goes to 7/8 full.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that iPhone is losing pair with the vehicle. Technician should delete the vehicle from the phone and the phone from the vehicle. Then perform a fresh pair between the iPhone and the vehicle.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin adds the 2015 model year to repair information on correcting a customer concern of poor, limited, reduced Remote Keyless Entry (RKE) or Remote Vehicle Start (RVS) range.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides a diagnostic tip for low line pressure or pressure regulator valve stuck after transmission service pump cover replacement.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides repair information to correct a customer concern of the fuel gauge not reading full, only goes to 7/8 full.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have a no crank concern with a fob program message displayed. The customer may indicate at times after unlocking the vehicle using the unlock button on the key fob, they enter the vehicle and depress the start button and the vehicle does not respond. If this concern is duplicated the technician should exit and lock the vehicle. Wait 5 minutes, depress the unlock button on either fob 3-5 times within 10 seconds, and then enter the vehicle. Technician will find that the vehicle will not crank and a message may display on the Driver Information Center ?! Remote Learn Pending Please Wait? or ?Ready For Fob Three? there will be no other response from the vehicle. If either message is displayed or the customer has commented on a similar concern, use the key to check the rotation of the driver?s door lock cylinder. If the key rotates further when unlocking then the normal 90 degrees, the vehicle may have been assembled with the incorrect door lock cylinder to latch rod. Technician will replace the incorrect rod.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have a blank displays, flashing displays, "Error or Update failed Messages", navigation map not loading, Bluetooth or USB concerns. Technician should inspect the USB/SD card port for a SD card or a device plug into any of the USB ports.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that may have a Diagnostic Trouble Code B124B sym 04 stored in the Human Machine Interface module. For model year 2014 the Human Machine Interface should be reprogrammed with the latest calibration from TIS2Web. For model year 2015 engineering is currently working on new calibrations to correct this concern.
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES THAT MAY HAVE A BLANK DISPLAYS, FLASHING DISPLAYS, ERROR OR UPDATE FAILED MESSAGES, NAVIGATION MAP NOT LOADING, BLUETOOTH OR USB CONCERNS. TECHNICIAN SHOULD INSPECT THE USB/SD CARD PORT FOR A SD CARD OR A DEVICE PLUG INTO ANY OF THE USB PORTS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES THAT MAY HAVE A NO CRANK CONCERN WITH A FOB PROGRAM MESSAGE DISPLAYED. THE CUSTOMER MAY INDICATE AT TIMES AFTER UNLOCKING THE VEHICLE USING THE UNLOCK BUTTON ON THE KEY FOB, THEY ENTER THE VEHICLE AND DEPRESS THE START BUTTON AND THE VEHICLE DOES NOT RESPOND. IF THIS CONCERN IS DUPLICATED THE TECHNICIAN SHOULD EXIT AND LOCK THE VEHICLE. WAIT 5 MINUTES, DEPRESS THE UNLOCK BUTTON ON EITHER FOB 3-5 TIMES WITHIN 10 SECONDS, AND THEN ENTER THE VEHICLE. TECHNICIAN WILL FIND THAT THE VEHICLE WILL NOT CRANK AND A MESSAGE MAY DISPLAY ON THE DRIVER INFORMATION CENTER ! REMOTE LEARN PENDING PLEASE WAIT OR READY FOR FOB THREE THERE WILL BE NO OTHER RESPONSE FROM THE VEHICLE. IF EITHER MESSAGE IS DISPLAYED OR THE CUSTOMER HAS COMMENTED ON A SIMILAR CONCERN, USE THE KEY TO CHECK THE ROTATION OF THE DRIVERS DOOR LOCK CYLINDER. IF THE KEY ROTATES FURTHER WHEN UNLOCKING THEN THE NORMAL 90 DEGREES, THE VEHICLE MAY HAVE BEEN ASSEMBLED WITH THE INCORRECT DOOR LOCK CYLINDER TO LATCH ROD. TECHNICIAN WILL REPLACE THE INCORRECT ROD.
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES THAT MAY HAVE A DIAGNOSTIC TROUBLE CODE B124B SYM 04 STORED IN THE HUMAN MACHINE INTERFACE MODULE. FOR MODEL YEAR 2014 THE HUMAN MACHINE INTERFACE SHOULD BE REPROGRAMMED WITH THE LATEST CALIBRATION FROM TIS2WEB. FOR MODEL YEAR 2015 ENGINEERING IS CURRENTLY WORKING ON NEW CALIBRATIONS TO CORRECT THIS CONCERN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information to correct a dealer concern of what they perceive to be paint staining when the protective shipping film is removed from certain vehicles.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin adds 2014 - 2015 model years to information regarding comeback prevention and using Customer Concern Verification Sheets (CCVS).
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on control module diagnostics and configuration, programming using the TIS Service Programming System (SPS), set-up and warranty.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information on chemical staining, pitting, corrosion and/or spotted appearance of chromed aluminum wheels, along with warranty information regarding these conditions.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have a Service Charging System, Battery Saver message Or Malfunction Indicator Lamp on, and/or charging system inoperative. Technician will use Global Diagnostic System 2 and clear the Diagnostic Trouble Codes in the Hybrid Powertrain Control Module and the Battery Energy Control Module. Then turn the ignition off for a minimum of 2 minutes to allow the high speed local area network and powertrain expansion bus to power down. Start the car and monitor the charging system voltage. If the charging system is still inoperative there may be a logic lock condition. Disconnect the 12V battery and perform a Global Capacitive Discharge and repeat steps again.
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ON THE STEPS TO DIAGNOSE AND REPAIR VEHICLES THAT MAY HAVE A SERVICE CHARGING SYSTEM, BATTERY SAVER MESSAGE OR MALFUNCTION INDICATOR LAMP ON, AND/OR CHARGING SYSTEM INOPERATIVE. TECHNICIAN WILL USE GLOBAL DIAGNOSTIC SYSTEM 2 AND CLEAR THE DIAGNOSTIC TROUBLE CODES IN THE HYBRID POWERTRAIN CONTROL MODULE AND THE BATTERY ENERGY CONTROL MODULE. THEN TURN THE IGNITION OFF FOR A MINIMUM OF 2 MINUTES TO ALLOW THE HIGH SPEED LOCAL AREA NETWORK AND POWERTRAIN EXPANSION BUS TO POWER DOWN. START THE CAR AND MONITOR THE CHARGING SYSTEM VOLTAGE. IF THE CHARGING SYSTEM IS STILL INOPERATIVE THERE MAY BE A LOGIC LOCK CONDITION. DISCONNECT THE 12V BATTERY AND PERFORM A GLOBAL CAPACITIVE DISCHARGE AND REPEAT STEPS AGAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This engineering information bulletin is requesting information from dealers on a customer concern that a Battery Saver Active message is displayed on DIC, drive motor generator belt broken, and DTC P1A6F or P0A90 may be set.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides repair information to correct a customer concern of mobile telephone microphone poor performance when using Bluetooth®
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT CHANGING THE TIRE AND WHEEL SIZE ON VEHICLES. GENERAL MOTORS WILL ONLY SUPPORT A TIRE CALIBRATION FOR TIRES THAT HAVE BEEN SIZED, TESTED AND DESIGNED FOR THE VEHICLE IN QUESTION AND ITS APPLICATIONS. TECHNICIAN SHOULD NOT USE THE INFORMATION THAT IS PROVIDED BY THE ANTILOCK BRAKING SYSTEM TIRE SIZE SELECTION.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin adds 2012 - 2015 model years to information communicating a change in the product field action customer reimbursement procedure (U.S. Dealers Only).
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician the steps needed to diagnose and repair the vehicles that may have unwanted or phantom phone calls. Technician will need to determine what type of call the customer is having that is unwanted. The vehicle may receive an incoming call just like any other phone. Typically the customer will hear the phone ringing in the vehicle. This scenario also includes incoming Bluetooth calls. One type of unwanted call can be made if the key pad is faulty the OnStar system will try to make a blue button call for shorted voltage in the circuits. The OnStar module could have an internal fault and produce a "Phone Unavailable" audio message also it may have a Diagnostic Trouble Code U1500 or B1000. Refer to diagnostics for the Diagnostic Trouble Code making sure to follow any applicable Bulletins or Preliminary Information sheets. A "Ready" or "OnStar ready" audio message heard while driving. In some cases it has been found that the customer is inadvertently pressing the ?push to talk? button on the steering wheel controls. On rare occasions, other issues in the steering column or Steering Wheel Control system may induce this concern.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLE THAT MAY HAVE AN ONSTAR SYSTEM THAT HAS PROGRESSION TONES WHEN PRESSING THE BLUE OR RED BUTTON. TECHNICIAN WILL NEED TO CALL GENERAL MOTORS TECHNICAL ASSISTANCE CENTER WITH THE SCAN TOOL DATA FROM THE ONSTAR SYSTEM.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides repair information to correct customer concerns about blank screen after startup and reverse, rear view camera message on, touch screen inoperable, Bluetooth and navigation concerns.
Source components: BACK OVER PREVENTION · BACK OVER PREVENTION: SENSING SYSTEM: CAMERA · EQUIPMENT:ELECTRICAL · EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides information that may be useful in diagnosing/testing batteries that have set for a long period of time and/or set in cold weather climates to correct a customer concern of symptoms that include, but not limited to, a slow or no crank condition that may be caused by a discharged battery.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure, when diagnosing vibration concerns.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides information that the tire pressure monitor (TPM) sensors must always be re-learned when accessory wheels are installed on the vehicle.
Source components: TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin was created for the Manual Transmission Operating Characteristics. The different noises caused by driver habit, weather conditions , and normal manual transmission noises.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicle that may OnStar inoperative and Navigation/GPS/Compass issues. Technician may find Diagnostic Trouble Codes B101D sym 3C and or F0. Technician will gather data using a scan tool and contact General Motors Technical Assistance Center for further assistance. After approval technician will replace the OnStar module.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary information bulletin provides information on how to remove stainless steel wheel nut caps with the matching depth of socket used on the wheel nut.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have Diagnostic Trouble Code P00C6 and/or P228C set. Technician will need to inspect the terminals at the Engine Control Module for fit and tension as well as the crimp to wire connection. Terminals to inspect in the ECM are connector x2 terminals 3, 18, and 19 for the fuel rail pressure sensor. Also connector x3 terminals 16 and 32 for the high pressure fuel pump.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides a procedure to reprogram the HPCM to correct the customer concern of a no charge, jump start and/or vehicle stalling.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about when listening to an iPod that the first song will still be displayed when the next song in the list is playing. Dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle and that the current song can be displayed by pressing the ?next? button while the device is playing.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a blind side alert may become active with no objects within range of sensors. Technician will need to inspect rear bumper fascia for signs of damage. If no fascia damage is found, reprogram the B2181L Side Object Sensor Module.
Source components: LANE DEPARTURE: BLIND SPOT DETECTION · VISIBILITY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have heated seats inoperative. Technician may find Diagnostic Trouble Code U0209 in the Heater-Vent-Air Conditioning. Technician will need to reprogram the seat heater control module using Service Programming System with the latest calibration to address the concern.
Source components: ELECTRICAL SYSTEM · SEATS:FRONT ASSEMBLY:SEAT HEATER/COOLER.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2. There are 5 terminated leads in a package part number is 13505346, which can be ordered through your normal General Motors Customer Care and Aftersales parts channel.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary information bulletin provides a procedure on reprograming the HMI module to repair the customers concern of the blank screen after start up, Rear view camera on, touch screen inop, bluetooth and navigation concerns.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D stored in Telematics Communication Interface Control Module. Technician will need to call General Motors Technical Assistance Center for further assistance. If the Diagnostic Trouble Code B101D has a sym 37 set please refer to the latest version of PIC5492.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This preliminary informational bulletin provides a procedure for the technician to test the power seats, the outside power mirriors, shorts in the wiring and the MSM, and reprogram the module if shorts weren't found, for the customers concern of the mirriors and/or seat inoperative.
NHTSA source summary · Original PDF not reviewed by Recallfolio
BUICK/CHEVROLET/GMC: DUE TO SOFTWARE ANOMALY, THE INSTRUMENT CLUSTER ANALOG GAUGES FAILS TO OPERATE PROPERLY. MODEL 2014 REGAL, LACROSSE, SILVERADO 1500, CORVETTE, SIERRA 1500, 2015 SUBURBAN, TAHOE, YUKON MODELS. *PE UPDATED 1/13/15. *PE
NHTSA source summary · Original PDF not reviewed by Recallfolio
GM: SOME VEHICLES MAY EXPERIENCE A BLANK SCREEN AFTER STARTUP AND REVERSE, THE REARVIEW CAMERA MESSAGE MAY BE ON, AND THE TOUCH SCREEN BECOMES INOPERATIVE. THE BLUETOOTH AND NAVIGATION MAY BE MALFUNCTIONING. ALSO INCLUDES CHEVROLET SILVERADO MODEL YEAR 2015 AND GMC SIERRA MODEL YEAR 2015. *JS UPDATE 02/25/15*LJ
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician how to determine if a vehicle is equipped with fog lights. Technician will need to check the Regular Production Option Code list. If the Regular Production Option Code has T3U it is equipped with fog lights, if the Regular Production Option Code is T4A the vehicle is equipped with day time running lights.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This warranty administration bulletin provide policy information of the JOB CARD, for a repair on vehicles and what is acceptable - customer authorization; Service manager approvals and transaction authorization; Details of concern, cause and correction; Labor Time; Technician ID and acoutablity of labor time; Proper documentation and retension of warranty parts; Accurate sublet charges and receipts; Add on concerns after the Job Card has been written.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about what XM offerings are available for vehicles. A dealer or customer can access the website listed below for vehicle specific XM offerings and availability.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D-37 history in the Vehicle Communication Interface Module or telematics communication interface control module. Engineering has determined that this code will only display in history on the scan tool and will not cause issues with OnStar system operation.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that have a Malfunction Indicator Lamp on or engine misfire, rough idle, extended crank, or crank no start in some cases. Technician will need to perform published Service Information diagnostics. If technician finds carbon an upper engine and valve cleaning should be performed.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication advises the technician that the Drive Motor Generator Battery Module and Drive Motor Generator Battery Sections for the 2012 - 2015 BuickLaCrosse, Buick Regal, 2013 - 2014 Chevrolet Malibu ECO and 2014 Chevrolet Impala with eAssist are being placed on restriction through the General Motors Technical Assistance Center. Dealer will need to contact General Motors Technical Assistance Center for further assistance.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
NHTSA source summary · Original PDF not reviewed by Recallfolio
This informational bulletin was created to help technician identify non GM calibrations for the gasoline engines and the damages that may be caused by aftermarket calibrations
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Preliminary Information communication provides information to the technician about vehicles that are travelling from Canada to the United States. While in the United States they are unable to receive Turn-by-Turn directions. Due to the existing cellular provider not having roaming agreements in areas outside of Canada to support transmitting of the packet data required for Turn-By-Turn feature to operate. The customer has 3 options while traveling through the United Sates. First if the vehicle is equipped with a navigation radio they can request a "Destination Download" to the vehicle. Second if the customer uses the OnStar RemoteLink app they can send the directions to the vehicle. The third option would be to have the vehicle loaded with a ?500 phone number? The customer will no longer be able to use their Hands Free Calling minutes when the new 500 phone number is loaded. If a customer chooses to restore Hands Free Calling in the future a new phone number will be assigned to the vehicle; previous phone numbers are not available.