The manufacturer’s record · Page 3 of 8
Original record summaries, dates and identifiers for this model-year. Records 201–300 of 775, ordered newest first. Dated records on this page: Oct 9, 2014–Jun 7, 2016.
Back to 2009 Audi A4 problems & recallsThis archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
NHTSA communication ID: 10093308
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS TECHNICAL SERVICE BULLETIN NOTIFIES THE READER THAT IF THE TPMS MESSAGE APPEARS BRIEFLY AFTER THE ENGINE IS STARTED AND THEN DISAPPEARS, IT DOES NOT INDICATE AN ISSUE WITH THE TPMS SYSTEM.
Source components: TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS.
Source record 10093308 at NHTSANHTSA communication ID: 10092662
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS TECHNICAL SERVICE BULLETIN CONTAINS INSTRUCTIONS FOR PRESSURE WASHING PORTS TO RESOLVE AN "AIR SYSTEM -- ACTION REQUIRED" MESSAGE.
Source components: ENGINE.
Source record 10092662 at NHTSANHTSA communication ID: 10092769
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS TECHNICAL SERVICE BULLETIN EXPLAINS POSSIBLE CAUSES FOR THE REARVIEW CAMERA TO NOT DISPLAY AN IMAGE.
Source components: BACK OVER PREVENTION: CAMERA SYSTEM.
Source record 10092769 at NHTSANHTSA communication ID: 10094894
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS TECHNICAL SERVICE BULLETIN CONTAINS INSTRUCTIONS FOR PRESSURE WASHING PORTS TO RESOLVE AN "AIR SYSTEM -- ACTION REQUIRED" MESSAGE.
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR.
Source record 10094894 at NHTSANHTSA communication ID: 10094116
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS TECHNICAL SERVICE BULLETIN EXPLAINS POSSIBLE CAUSES FOR THE REARVIEW CAMERA TO NOT DISPLAY AN IMAGE.
Source components: BACK OVER PREVENTION: CAMERA SYSTEM.
Source record 10094116 at NHTSANHTSA communication ID: 10093601
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS BULLETIN INFORMS THE READER TO RECEIVE DIAGNOSIS OR AUTHORIZATION FROM THE TECHNICAL ASSISTANCE CENTER BEFORE REPAIRING AN ISSUE WITH THE CATALYTIC CONVERTER THAT CAUSES DTC P042000
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR.
Source record 10093601 at NHTSANHTSA communication ID: 10120669
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customer may report hearing creaking or squeaking noise from the steering column when steering slowly. The noise may get louder at higher temperatures or when the vehicle is driven for a longer period of time. The noise comes from the sealing sleeve/steering column opening on the bulkhead.
Source components: STEERING · STEERING:COLUMN.
Source record 10120669 at NHTSANHTSA communication ID: 10118401
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customer reports seeing the messages "TPMS" and "Tire pressure: System malfunction!" in the instrument cluster. This occurs after the engine is started, the message "TPMS" appears briefly and then turns off. There are no DTCs stored.
Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL.
Source record 10118401 at NHTSANHTSA communication ID: 10123658
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 40 number 14-41 dated July 2, 2014. Oil appears on one or several shock absorbers. Oil may appear on a shock absorber As a result of a leak because the shock absorber is damaged. Oil may appear on a shock absorber As a result of residue from when the shock was filled during production, or as a result of slight condensation in the seal area. This small amount of oil is for lubrication and it reduces wear on the seal.
Source components: SUSPENSION:FRONT:SHOCK ABSORBER · SUSPENSION:REAR:SHOCK ABSORBER.
Source record 10123658 at NHTSANHTSA communication ID: 10123670
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 13-04 dated September 11, 2013. The Bluetooth® telephone cannot be connected to the vehicle?s Infotainment system. Certain restrictions are present when a Bluetooth device is connected to the vehicle. The restrictions vary depending on the vehicle system present.
Source components: ELECTRICAL SYSTEM.
Source record 10123670 at NHTSANHTSA communication ID: 10123656
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 20 number 13-29 dated November 15, 2013. The fuel tank has been removed from the vehicle and must be neutralized before shipment or disposal. When the fuel tank in a vehicle is replaced, the original tank must be properly flushed to neutralize the remaining gasoline or diesel fuel.
Source components: FUEL SYSTEM, DIESEL · FUEL SYSTEM, GASOLINE.
Source record 10123656 at NHTSANHTSA communication ID: 10123653
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 17 number 14-49 dated April 3, 2014. When the vehicle is completely refueled, the vehicle range (?distance to empty?) that is displayed is different than the vehicle range that was displayed the last time the vehicle was completely refueled. The displayed vehicle range drops inconsistently. After the vehicle is refueled, the displayed vehicle range does not change for a long period of time. When the vehicle is driven on hilly roads for a long period of time, the displayed vehicle range suddenly changes by a significant amount. There are no DTCs related to fuel senders stored in the instrument cluster control module, J285 (address word 17). This condition does not involve or affect the accuracy of the fuel level indicator, but only the estimated distance to empty display on the on-board computer.
Source components: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL · FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY.
Source record 10123653 at NHTSANHTSA communication ID: 10123650
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 00 number 10-05 dated June 14, 2010. VIN plate and/or B-Pillar Safety Certification label requires replacement.
Source components: EQUIPMENT:OTHER:LABELS.
Source record 10123650 at NHTSANHTSA communication ID: 10123667
NHTSA source summary · Original PDF not reviewed by Recallfolio
The traffic feature in the MMI navigation is inoperative. If the vehicle is a model year 2016 A6 or A7, see TSB 2042013: 91 Audi connect online destination search, Google Earth navigation view, or INRIX online traffic is not available. There is a known server issue that can only be resolved through a change to the Audi AG backend server. Audi has changed traffic providers over the years as new technologies have developed. This bulletin provides an overview of the different systems and the basic checks that can be performed to diagnose complaints related to traffic in the MMI navigation system.
Source components: EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM).
Source record 10123667 at NHTSANHTSA communication ID: 10123657
NHTSA source summary · Original PDF not reviewed by Recallfolio
When the vehicle is driven between 35 mph and 75 mph, a noise can be heard in the front of the vehicle. The customer may say that the noise is coming from the steering column area, and may describe the sound as buzzing, humming, whistling, whining, grinding, howling, and/or droning. The best way to understand the complaint is to discuss it with the customer. Faulty wheel bearing(s) may cause the noise.
Source components: STEERING.
Source record 10123657 at NHTSANHTSA communication ID: 10216635
NHTSA source summary · Original PDF not reviewed by Recallfolio
Assistance to properly diagnose a fuel pressure sensor -G247- concern.
Source components: BACK OVER PREVENTION · SERVICE BRAKES.
Source record 10216635 at NHTSANHTSA communication ID: 10123652
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 01 number 14-01 dated October 30, 2014. The MIL is on. DTCs may be stored in the ECM. Assistance to properly diagnose a fuel pressure sensor -G247- concern.
Source components: ELECTRICAL SYSTEM · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10123652 at NHTSANHTSA communication ID: 10123607
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 24 number 14-50 dated August 28, 2014. The engine judders or runs erratically. The vehicle judders during acceleration. No event entry is stored in the engine control module (ECM). The air mass meter is suspected to be faulty. Possible incorrect function on the sensor elements of the air mass meter.
Source components: ELECTRICAL SYSTEM.
Source record 10123607 at NHTSANHTSA communication ID: 10123603
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 17 number 15-60 dated April 24, 2015. In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine. Typically, engines with specified break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in period. Refer to the Owner?s Manual for specific break-in procedures. Under normal conditions, the rate of oil consumption depends on the quality and viscosity of the oil, the RPM at which the engine is operated, the ambient temperature and road conditions. Additional factors are the amount of oil dilution from water condensation or fuel residue and the oxidation level of the oil. Under certain driving conditions, internal engine pressure conditions in the 2.0 TFSI engine can negatively influence the rate of oil consumption. This condition can occur while the vehicle is operated in metro driving conditions; for example: stop-and-go traffic with extended idle periods.
Source components: ENGINE AND ENGINE COOLING.
Source record 10123603 at NHTSANHTSA communication ID: 10123611
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 69 number 12-22 dated February 13, 2012. After the comfort system central control module, J393 (address word 05) is replaced, the control module cannot be coded via SVM spec/actual. Any time a comfort system central control module, J393 (address word 05), is replaced, the new control module must be coded and parameterized with online SVM spec/actual or an SVM code. If the SVM spec/actual returns a response of ?Check Hardware?, then an SVM code is required to code and parameterize the new control module. The SVM code can be found in Parts Bulletin 9-101, which can be found on the etkainfo.com web site.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10123611 at NHTSANHTSA communication ID: 10123716
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 46 number 14-86 dated July 14, 2014. DO NOT use this TSB if there is another TSB for same concern applicable to the VIN. This TSB is only intended for diagnostic purposes and does not serve as a guideline for determining warrantable conditions. Customer may report that the steering wheel vibrates or pulsates when the brakes are applied. driving style, environmental conditions, and service history of the vehicle. Additionally, as brake pads and discs wear, their dampening ability is reduced. Disc thickness variation (DTV) is a common condition that contributes to brake pulsation. DTV occurs when the two braking surfaces of the brake disc are no longer parallel to each other. This condition cannot be accurately measured with normal workshop tools.
Source components: SERVICE BRAKES, HYDRAULIC · STEERING: STEERING WHEEL/HANDLE BAR.
Source record 10123716 at NHTSANHTSA communication ID: 10123719
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 55 number 13-32 dated July 30, 2013. ?Low Oil Level? message is on in the DIS or MMI. The hood must be open for at least 30 seconds for a reset of this message to be performed. The message is not reset in the DIS/MMI because the hood has not been recognized as being opened due to an inoperative hood contact switch.
Source components: ELECTRICAL SYSTEM.
Source record 10123719 at NHTSANHTSA communication ID: 10123725
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 10-59 dated September 15, 2010. In Mix (shuffle) mode, very long response times and subsequent malfunctions occur when the next track is being selected. Long response times also occur when the ?Return? hard key is pressed. In Mix (shuffle) mode, the previous track is not played when the ?Previous? button is selected in the CD control menu. A different track plays instead. In Mix (shuffle) mode, when the first track of the playlist was selected via the ?Previous? button in the CD control menu (rather than with the rotary push button), the track list shown in the MMI does not match the track list shown in the driver information panel (synchronization issue). In Mix (shuffle) mode, the current track is not highlighted in white letters in the MMI display. If the current track is selected again via the rotary push button, the audio briefly drops out. The current track is not color-highlighted in the MMI display. Audiobook tracks continuously fast-forward if ?Fast Forward? was selected in the first few seconds after the track started playing. The message ?Device is being initialized. Please wait?? is displayed when a second generation iPod Nano is installed. iPod locks up but is operable again after the iPod is reset. iPod performs a reset and restarts on its own. iPod is not detected when it is plugged into the AMI. The message ?Device or cable type not supported? appears in the MMI display. An automatic iPod upgrade through iTunes contained inoperative driver software. The customer may not realize that the iPod was updated and may complain that the AMI software is causing the issues. Because downgrading the updated iPod software is usually not possible, the AMI driver software (firmware) must be updated. The firmware update of AMI is not a ZUG update. Unlike ZUG updates, which are performed with an update CD in the CD changer, this firmware update is performed with a USB device connected dir
Source components: ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10123725 at NHTSANHTSA communication ID: 10123712
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 44 number 14-56 dated December 8, 2014. Customer feels vibration in the seat, vehicle floor, footwell, pedals, or steering wheel. This condition does not lead to any handling concerns or loss of vehicle control. Customer feels the vibration while driving at highway speeds from 55 ? 80 mph (88 ? 128 km/h). This bulletin is not applicable if this vehicle has a Repair Authorization on this topic. If an applicable Repair Authorization is not followed, the claim will not be paid. Tires with higher mileage and/or wear should be inspected to determine the best correction for the issue (repair or replacement). Tire life and condition should be determined prior to starting any diagnosis or repair for a vibration.
Source components: SUSPENSION.
Source record 10123712 at NHTSANHTSA communication ID: 10123711
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 37 number 10-12 dated October 12, 2010. A transmission warning is illuminated in the information display. Transmission is in limp home mode or the vehicle delays and shudders when driven from a stop. DTCs is stored in the TCM. TCM software error.
Source components: POWER TRAIN.
Source record 10123711 at NHTSANHTSA communication ID: 10123775
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 96 number 13-67 dated July 10, 2013. The customer may report that the handheld transmitter cannot be programmed to the garage door opener control module, J530. The customer?s door opener system may not be compatible with J530. The battery in the handheld transmitter may be too weak for a good signal. The battery charge may be sufficient to operate the garage door opener, but not enough to program the remote transmitter to the vehicle system. The battery in the handheld transmitter may be too weak for a good signal. The battery charge may be sufficient to operate the garage door opener, but not enough to program the remote transmitter to the vehicle system. In A4 model years 2005?2006 and A3 model year 2009, the actual location of the garage door opener control module differs from the location shown in the owner's manual (opposite side of front bumper). The customer may misunderstand the programming procedure, particularly if the customer?s HomeLink® opener system is using an alternate code. The handheld transmitter?s programming function may become inoperative, or the transmitter is too far away from J530. Interference prevents the communication between handheld transmitter and J530. Interference prevents the communication between handheld transmitter and J530. If the vehicle flashes during the programming of a handheld transmitter, this does not necessarily indicate that the programming was successful; it only indicates that the vehicle has recognized and saved a signal.
Source components: ELECTRICAL SYSTEM:SOFTWARE.
Source record 10123775 at NHTSANHTSA communication ID: 10123763
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 17 number 15-63 dated June 2, 2015. A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not available in the Elsa repair manual. Because of a system change, the adjustment values for the service dipstick T40178 were removed from the repair manual.
Source components: ENGINE.
Source record 10123763 at NHTSANHTSA communication ID: 10123764
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 19 number 15-61 dated July 7, 2015. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Source components: ENGINE AND ENGINE COOLING.
Source record 10123764 at NHTSANHTSA communication ID: 10128419
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 96 number 14-85 dated July 24, 2014. The sunglass holder in the dome light assembly will not latch closed or is stuck closed. The condition may be intermittent. The sunglass holder spring latch mechanism may have been damaged during the assembly procedure.
Source components: EQUIPMENT.
Source record 10128419 at NHTSANHTSA communication ID: 10128363
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 87 number 14-49 dated April 25, 2014. Air conditioning is inoperative. The HVAC blower functions normally. Battery discharged; however, when charged, there is no bus silence when vehicle ignition is off. The A/C pressure/temperature sensor, G395, leaks refrigerant. This causes sensor G395 to show an incorrect or implausible value when reading MVBs. An incorrect signal or a low refrigerant level in the system can cause the air conditioning compressor to deactivate. The LIN cable connecting the vehicle electrical system control module, J519, to sensor G395 is pinched or cut. This affects the A4/S4, A5/S5 Coupe and Cabriolet, and Q5 vehicles. The A6 and A8 are not affected by this type of failure. The pressure sensor G395/G65 sends an incorrect signal that prevents bus silence and the battery is discharged. Sensor G395 is a LIN slave of the vehicle electrical system control module. The vehicle electrical system control module transfers the information provided by the sensor via the comfort data bus to the climate control module, J255.
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY · EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10128363 at NHTSANHTSA communication ID: 10128406
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 57 number 12-62 dated January 9, 2012. The trunk cannot be unlocked with the button on the remote, with the button in the driver?s door panel, or with the handle on the lid of the trunk. Vehicles have a ?VALET? button in the glove box that activates the valet parking feature, which prevents unauthorized access to the trunk. When the valet parking feature is activated, the trunk can only be opened mechanically with the key.
Source components: LATCHES/LOCKS/LINKAGES:TRUNK LID:LOCK.
Source record 10128406 at NHTSANHTSA communication ID: 10130705
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 48 number 15-65 dated March 23, 2015. Customer may report hearing creaking or squeaking noise from the steering column when steering slowly (the noise can be duplicated while the vehicle is stationary if the steering wheel is turned slowly). The noise may get louder at higher temperatures or when the vehicle is driven for a longer period of time. The noise comes from the sealing sleeve/steering column opening on the bulkhead. Insufficient lubrication of the intermediate steering shaft in the area of the sealing sleeve.
Source components: STEERING.
Source record 10130705 at NHTSANHTSA communication ID: 10128473
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 40 number 12-25 dated August 7, 2012. Steering wheel oscillation at highway speeds (typically between 70 and 85 mph). No vibration in the seat surface or other vehicle components. Audi original equipment tires are installed on the vehicle. If necessary, TSB 2022179 has been completed and the 1st harmonic of radial force of every tire and wheel assembly is below 18 lbs. at a tire pressure of 36 PSI (2.5 bar). Ride disturbances such as uneven roads, wheel imbalance, impermissibly high radial forces of the tires, or other rotating components on the front of the vehicle are transmitted to the steering wheel as a vibration or oscillation.
Source components: EQUIPMENT · STEERING.
Source record 10128473 at NHTSANHTSA communication ID: 10128399
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 19 number 14-50 dated June 20, 2014. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Source components: ENGINE AND ENGINE COOLING.
Source record 10128399 at NHTSANHTSA communication ID: 10128471
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 30 number 11-10 dated December 2, 2011. Clutch is not operating properly. Clutch has a burnt smell. Clutch pedal does not fully return to starting position. Incorrect shifting, the revolutions of clutch plate and engine input shaft differ too much, excessive slipping of the clutch, and when the clutch is pressed and an incorrect lower gear is selected, can result in clutch damage.
Source components: EQUIPMENT · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · POWER TRAIN.
Source record 10128471 at NHTSANHTSA communication ID: 10058584
NHTSA source summary · Original PDF not reviewed by Recallfolio
AUDI: ENGINE, ON SOME VEHICLES, WOULD RUN IRREGULARLY OR HAVE MALFUNCTION INDICATOR LAMP (MIL) ON OR POSSIBLE FILTER ELEMENT FOR CAMSHAFT ADJUSTMENT VALVE CAN LOOSEN AND IN OIL CIRCUIT, THERE IS NO DAMAGE FROM LOOSENED PARTICLES. MODEL ALL. ALL YEARS. *PE
Source components: ENGINE.
Source record 10058584 at NHTSANHTSA communication ID: 10120832
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 14-50 dated July 10, 2014. Customer may report that cracking, grinding, rattling, humming, whining, or similar interference is coming from one or more speakers. Parts of the speakers (such as the brackets, cables, or covers) or parts of the interior fittings (such as door covers, rear shelf, facings, or covers) can vibrate at certain frequencies, causing noises. The radio tuner or other control modules may be affected by electromagnetic interference from aftermarket electronic devices.
Source components: ELECTRICAL SYSTEM.
Source record 10120832 at NHTSANHTSA communication ID: 10120817
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 46 number 14-75 dated March 12, 2014. Customer may complain about brake squeak or squeal with light to moderate pedal pressure.
Source components: SERVICE BRAKES.
Source record 10120817 at NHTSANHTSA communication ID: 10120821
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 87 number 15-63 dated May 18, 2015. There is an unpleasant, musty odor coming from the heating and ventilation system. The odor usually occurs when the vehicle has been sitting unused for five hours or more. The odor usually occurs within 20 to 60 seconds after the vehicle is started. Condensation, which is a normal condition in all A/C systems, can cause a musty odor.
Source components: EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10120821 at NHTSANHTSA communication ID: 10120872
NHTSA source summary · Original PDF not reviewed by Recallfolio
This document contains a fluid capacity chart as well as a chart that contains the parts and part numbers needed for service.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10120872 at NHTSANHTSA communication ID: 10120805
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 17 number 14-53 dated November 7, 2014. A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not available in the Elsa repair manual. Because of a system change, the adjustment values for the service dipstick T40178 were removed from the repair manual.
Source components: ENGINE.
Source record 10120805 at NHTSANHTSA communication ID: 10120052
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 97 number 10-15 dated October 20, 2010. Sporadic fault memory entries are stored in various control modules. Contacts may be widened (over 0.63 mm) if incorrect pins or incorrect methods for current flow tests are used. Either action may cause intermittent electrical connections, which can cause sporadic DTCs to be stored in various control modules.
Source components: ELECTRICAL SYSTEM.
Source record 10120052 at NHTSANHTSA communication ID: 10120050
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 94 number 12-96 dated November 1, 2012. Part or all of the daytime running lights do not work on vehicles equipped with LED daytime running lights. For vehicles with halogen daytime running lights, refer to TSB 2017488: 94 Halogen Daytime running lights do not work. In the past, the daytime running light bulbs were a serviceable part. In this application, the LED strip cannot be replaced, and may have an associated control module. This TSB is for servicing information only.
Source components: EXTERIOR LIGHTING.
Source record 10120050 at NHTSANHTSA communication ID: 10120041
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 87 number 14-54 dated August 28, 2014. There is an unpleasant, musty odor coming from the heating and ventilation system. The odor usually occurs when the vehicle has been sitting unused for five hours or more. The odor usually occurs within 20 to 60 seconds after the vehicle is started. Condensation, which is a normal condition in all A/C systems, can cause a musty odor. If the odor is noticeable in the vehicle when the engine is not turned on, the cause may be mold and mildew in the passenger compartment, and not be related to the A/C system. All other possible sources of the odor must be investigated before this bulletin can be performed.
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10120041 at NHTSANHTSA communication ID: 10120034
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 24 number 12-38 dated August 24, 2012. A delay and shudder is felt when vehicle is driven from a stop. Shuddering is felt on acceleration from under 15 mph. The complaint can be reproduced, but no fault can be found. Incorrect calibration of the engine control module (ECM), J623 (address word 01) and of the transmission control module (TCM), J217 (address word 02).
Source components: POWER TRAIN.
Source record 10120034 at NHTSANHTSA communication ID: 10119990
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 39 number 14-14 dated May 5, 2014. A squealing, howling, or whistling noise may be heard coming from under the vehicle. The condition is typically noticed when the vehicle is cold (normally below freezing) and is moving at speeds of 5 - 60 mph. The noise is from the intermediate bearing of the propeller shaft.
Source components: POWER TRAIN.
Source record 10119990 at NHTSANHTSA communication ID: 10120002
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 12-42 dated June 20, 2012. The customer complains about the picture quality of rearview backup camera image in the MMI screen. The picture is fuzzy or distorted. The picture looks too bright, too dark, or opaque in certain areas of the image. The colors of the objects in the image are incorrect or slightly off. The guidelines used for parking are fuzzy, distorted, or pixelated when compared with the guidelines displayed on another vehicle?s MMI.
Source components: BACK OVER PREVENTION: CAMERA SYSTEM · EQUIPMENT:ELECTRICAL.
Source record 10120002 at NHTSANHTSA communication ID: 10119986
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 17 number 15-54 dated January 29, 2015. In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine. Typically, engines with specified break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in period. Refer to the Owner's Manual for specific break-in procedures. Under normal conditions, the rate of oil consumption depends on the quality and viscosity of the oil, the RPM at which the engine is operated, the ambient temperature and road conditions. Additional factors are the amount of oil dilution from water condensation or fuel residue and the oxidation level of the oil. Under certain driving conditions, internal engine pressure conditions in the 2.0 TFSI engine can negatively influence the rate of oil consumption. This condition can occur while the vehicle is operated in metro driving conditions.
Source components: ENGINE AND ENGINE COOLING.
Source record 10119986 at NHTSANHTSA communication ID: 10120003
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 94 number 12-92 dated October 24, 2012. Condensation is visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, or third brake light lens.
Source components: EXTERIOR LIGHTING:HEADLIGHTS.
Source record 10120003 at NHTSANHTSA communication ID: 10119999
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 74 number 14-19 dated May 9, 2014. The panel on the back of the front seat is warped or dented. The headrest on the rear seatback may also be damaged. The damaged is caused when the headrest of the rear seat backrest comes in contact with the back of the front seat. This occurs when the rear seat is folded down with the headrests installed, and the front seat is moved back far enough to make contact with the rear seat headrest.
Source components: SEATS.
Source record 10119999 at NHTSANHTSA communication ID: 10120015
NHTSA source summary · Original PDF not reviewed by Recallfolio
This document contains general information on the upcoming warranty extension on the high pressure fuel pump.
Source components: FUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP.
Source record 10120015 at NHTSANHTSA communication ID: 10119947
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 48 number 14-57 dated January 29, 2014. Customer may report hearing creaking or squeaking noise from the steering column when steering slowly (the noise can be duplicated while the vehicle is stationary if the steering wheel is turned slowly). The noise may get louder at higher temperatures or when the vehicle is driven for a longer period of time. The noise comes from the sealing sleeve/steering column opening on the bulkhead. Insufficient lubrication of the intermediate steering shaft in the area of the sealing sleeve.
Source components: STEERING · STEERING:COLUMN.
Source record 10119947 at NHTSANHTSA communication ID: 10119956
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 14-69 dated November 4, 2014. The following message appears on the MMI display: "Device or cable type not supported". The AMI cable being used is a genuine Audi-branded cable with an Audi part number (see Required Parts and Tools for a list of valid part numbers). The "Device or cable type not supported" message may be displayed when an incorrect AMI cable type is connected to the MMI system. Only cables with an Audi part number (i.e., 4F0.XXX.XXX) are supported by the MMI system. Volkswagen-branded cables look similar, but are not guaranteed to work with Audi MMI systems. The label on the end of an Audi-branded cable has an Audi logo and Audi part number. Audi-branded cables have unique firmware inside the hardware that can determine which MMI system and iOS device are connected to the cable. Volkswagen cables do not have this firmware. The firmware is required to allow the system to function normally due to the different technology available in the different MMI systems and in the different iPhones and iPod Touch devices. In addition, the AMI system was designed to play the music stored locally on the connected device only. Music streaming (from Spotify or Pandora, for example) is not supported, and music stored in the cloud (on Google Play, Amazon Prime, or iTunes Match/iCloud, for example) may drop out, pause, and skip when played.
Source components: ELECTRICAL SYSTEM.
Source record 10119956 at NHTSANHTSA communication ID: 10119945
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 10 number 13-10 dated September 5, 2013. Prior to engine replacement, any debris lodged in transferred assemblies must be removed. If the engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds, exhaust down-pipes, turbocharger, supercharger, and/or intercooler. If these metal debris pieces are not removed prior to the installation and operation of the replacement engine, they could be drawn into the combustion chamber, which can cause a knocking noise and subsequent serious engine damage.
Source components: ENGINE AND ENGINE COOLING.
Source record 10119945 at NHTSANHTSA communication ID: 10119955
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 08-129 dated November 12, 2008. Customer states that the reception of satellite radio occasionally fades or drops out. The information display may show a message related to the satellite radio, such as "Linking", "Updating", "Acquiring Signal", "Loading", "No Signal", or "No Sat".
Source components: EQUIPMENT:ELECTRICAL · EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10119955 at NHTSANHTSA communication ID: 10119940
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 01 number 13-09 dated June 21, 2013. The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in excessive accumulation of deposits on intake valves, intake manifold, fuel injectors, and combustion chambers, engine running rough after cold start, excessive engine cranking time, hesitations while driving, rough engine idle, Reduced engine performance, and/or Poor fuel economy. Conditions may be severe enough to illuminate the MIL in conjunction with storage of DTCs for misfire, lean fuel system, or air/fuel ratio imbalance in the engine control module. Condition may be caused by use of contaminated gasoline. Condition may be caused by use of gasoline with a low content of deposit control additives.
Source components: FUEL SYSTEM, GASOLINE.
Source record 10119940 at NHTSANHTSA communication ID: 10119946
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 17 number 13-35 dated January 9, 2013. This bulletin lists engine oils that meet Audi oil quality standards (VW 501 01, 502 00, 505 00, 505 01, and 504 00/507 00).
Source components: ENGINE AND ENGINE COOLING.
Source record 10119946 at NHTSANHTSA communication ID: 10119958
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 94 number 15-60 dated February 12, 2015. The light bulb warning light is displayed in the instrument cluster with the following message: "Vehicle lights: malfunction". DTCs are stored in the vehicle electrical system control module. Exterior lights are functioning properly.
Source components: ELECTRICAL SYSTEM.
Source record 10119958 at NHTSANHTSA communication ID: 10120682
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 01 number 13-69 dated February 14, 2013. Noises and inconsistent engine operation after cold start during the catalyst heating phase. The customer may misinterpret these symptoms as engine misfiring. This bulletin applies only to non-diesel engines.
Source components: ENGINE AND ENGINE COOLING.
Source record 10120682 at NHTSANHTSA communication ID: 10120705
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 94 number 14-32 dated January 23, 2014. The light bulb warning light is displayed in the instrument cluster with the following message: "Vehicle lights: malfunction". DTCs are stored in the vehicle electrical system control module. Exterior lights are functioning properly.
Source components: ELECTRICAL SYSTEM · EXTERIOR LIGHTING.
Source record 10120705 at NHTSANHTSA communication ID: 10119856
NHTSA source summary · Original PDF not reviewed by Recallfolio
Engine oil consumption is too high. Under certain driving conditions, internal engine pressure conditions in the 2.0 TFSI engine can negatively influence the rate of oil consumption. Crankcase pressure reduction starting with model year 2012
Source components: ENGINE.
Source record 10119856 at NHTSANHTSA communication ID: 10119886
NHTSA source summary · Original PDF not reviewed by Recallfolio
This document contains the claim form for the Audi oil consumption class action settlement.
Source components: ENGINE AND ENGINE COOLING.
Source record 10119886 at NHTSANHTSA communication ID: 10119879
NHTSA source summary · Original PDF not reviewed by Recallfolio
Audi is extending the New Vehicle Limited Warranty for certain 2009-2011 A4, A5, and Q5 Vehicles with the CAEB 2.0T engine to 8 years/80,000 miles (whichever occurs first) from the vehicle's in-service date or 12 months/12,000 miles (whichever occurs first) from the date of a settlement Service Adjustment, whichever date occurs later. The limited warranty extension is fully transferable to subsequent owners. Eligible vehicles are identified in Elsa with the Warranty Extension Key U24 OC Ext-Info AWO Resource Ctr. Some customers have complained of excessive engine oil consumption. Conditions unrelated to engine oil consumption are not covered under this extension.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10119879 at NHTSANHTSA communication ID: 10231116
NHTSA source summary · Original PDF not reviewed by Recallfolio
Product quality is Announcing a new innovation in technical service bulletins: portable, easy to access videos
Source components: EQUIPMENT:ELECTRICAL.
Source record 10231116 at NHTSANHTSA communication ID: 10124893
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 13-74 dated February 5, 2013. Parking aid sporadically warns of obstacles when none exist. Parking aid is inoperative or provides constant warning. Various parking aid sensor fitting issues. Environmental conditions.
Source components: EQUIPMENT.
Source record 10124893 at NHTSANHTSA communication ID: 10228302
NHTSA source summary · Original PDF not reviewed by Recallfolio
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet.
Source components: EQUIPMENT:ELECTRICAL:INFOTAINMENT.
Source record 10228302 at NHTSANHTSA communication ID: 10224981
NHTSA source summary · Original PDF not reviewed by Recallfolio
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet.
Source components: ELECTRICAL SYSTEM · EQUIPMENT.
Source record 10224981 at NHTSANHTSA communication ID: 10221954
NHTSA source summary · Original PDF not reviewed by Recallfolio
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet.
Source components: EQUIPMENT:ELECTRICAL.
Source record 10221954 at NHTSANHTSA communication ID: 10124882
NHTSA source summary · Original PDF not reviewed by Recallfolio
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet. Audi of America has started to host its TSB videos outside of ElsaPro. Doing so provides higher-quality videos, more reliable access to the videos, and the ability to view the videos on different devices.
Source components: ELECTRICAL SYSTEM.
Source record 10124882 at NHTSANHTSA communication ID: 10250944
NHTSA source summary · Original PDF not reviewed by Recallfolio
Steering wheel shimmy, vibration, and/or oscillation
Source components: STEERING.
Source record 10250944 at NHTSANHTSA communication ID: 10231114
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical bulletins and updates
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10231114 at NHTSANHTSA communication ID: 10124892
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 12-63 dated October 4, 2012. The customer may report flickering of the dash insert lighting, of the A/C control panel lighting, or of the inside light. The condition occurs when the accelerator is pressed while the vehicle is in P or N, or when the vehicle is shifted down when moving downhill. Only vehicles with PR number 8GH may be affected. When high electricity consumers are switched off when the battery is fully charged, the energy generated by the alternator is sometimes too great for the power system to absorb. This may lead to briefly-increased voltage, causing the lights to flicker.
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10124892 at NHTSANHTSA communication ID: 10124888
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 44 number 14-50 dated May 14, 2014. Customer feels vibration in the seat, vehicle floor, footwell, pedals, or steering wheel. This condition does not lead to any handling concerns or loss of vehicle control. Customer feels the vibration while driving at highway speeds from 55 ? 80 mph (88 ? 128 km/h). This bulletin is not applicable if this vehicle has a Repair Authorization on this topic. If an applicable Repair Authorization is not followed, the claim will not be paid.
Source components: EQUIPMENT.
Source record 10124888 at NHTSANHTSA communication ID: 10124898
NHTSA source summary · Original PDF not reviewed by Recallfolio
This is an advance notice for Audi of America employees. This notice contains information for the accessories operations technical bulletin.
Source components: EQUIPMENT.
Source record 10124898 at NHTSANHTSA communication ID: 10228379
NHTSA source summary · Original PDF not reviewed by Recallfolio
The programmed values for the misfiring recognition are not automatically reset by deleting the memory once.
Source components: ENGINE AND ENGINE COOLING.
Source record 10228379 at NHTSANHTSA communication ID: 10225058
NHTSA source summary · Original PDF not reviewed by Recallfolio
The programmed values for the misfiring recognition are not automatically reset by deleting the memory once.
Source components: ENGINE AND ENGINE COOLING.
Source record 10225058 at NHTSANHTSA communication ID: 10222031
NHTSA source summary · Original PDF not reviewed by Recallfolio
The programmed values for the misfiring recognition are not automatically reset by deleting the memory once.
Source components: ENGINE AND ENGINE COOLING.
Source record 10222031 at NHTSANHTSA communication ID: 10124866
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 01 number 13-29 dated September 16, 2013. The engine warning light is on after engine replacement. The engine is not running roughly. However, the engine control module, J623 (address word 01), is storing one or more engine misfire fault codes. The fault codes occur at light load, between 8% and 14% accelerator pedal position. The programmed values for the misfiring recognition are not automatically reset by deleting the memory once.
Source components: ENGINE.
Source record 10124866 at NHTSANHTSA communication ID: 10231143
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical bulletins and updates
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10231143 at NHTSANHTSA communication ID: 10067706
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10067706 at NHTSANHTSA communication ID: 10231142
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical bulletins and updates
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10231142 at NHTSANHTSA communication ID: 10124878
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 85 number 14-20 dated February 24, 2014. DTCs may be stored in the heating and air conditioning electronics control module. A faulty printed circuit board in the fresh air blower control module and/or the carbon brushes bind in the brush holder and, as a consequence, lose contact with the motor commutator of the fresh air blower can cause Improper operation of the fresh air blower.
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10124878 at NHTSANHTSA communication ID: 10124867
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 17 number 14-50 dated August 15, 2014. A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not available in the Elsa repair manual. Because of a system change, the adjustment values for the service dipstick T40178 were removed from the repair manual.
Source components: ENGINE.
Source record 10124867 at NHTSANHTSA communication ID: 10124877
NHTSA source summary · Original PDF not reviewed by Recallfolio
The following message appears on the MMI display: ?Device or cable type not supported?. The ?Device or cable type not supported? message may be displayed when the wrong AMI cable type is used. See the Service section of this bulletin for an overview of the AMI cables that support iOS devices.
Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY:CABLES.
Source record 10124877 at NHTSANHTSA communication ID: 10231140
NHTSA source summary · Original PDF not reviewed by Recallfolio
Technical bulletins and updates
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10231140 at NHTSANHTSA communication ID: 10228377
NHTSA source summary · Original PDF not reviewed by Recallfolio
Assistance to properly diagnose a fuel pressure sensor -G247- concern
Source components: ELECTRICAL SYSTEM · FUEL/PROPULSION SYSTEM.
Source record 10228377 at NHTSANHTSA communication ID: 10225056
NHTSA source summary · Original PDF not reviewed by Recallfolio
Assistance to properly diagnose a fuel pressure sensor -G247- concern
Source components: FUEL SYSTEM, GASOLINE.
Source record 10225056 at NHTSANHTSA communication ID: 10222029
NHTSA source summary · Original PDF not reviewed by Recallfolio
Assistance to properly diagnose a fuel pressure sensor -G247- concern
Source components: FUEL SYSTEM, GASOLINE.
Source record 10222029 at NHTSANHTSA communication ID: 10124716
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 01 number 14-83 dated July 17, 2014. MIL on. DTCs may be stored in the engine control module (ECM). Assistance to properly diagnose a fuel pressure sensor -G247- concern.
Source components: ENGINE AND ENGINE COOLING.
Source record 10124716 at NHTSANHTSA communication ID: 10065411
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: FUEL SYSTEM, OTHER.
Source record 10065411 at NHTSANHTSA communication ID: 10250950
NHTSA source summary · Original PDF not reviewed by Recallfolio
Tightening wheel bolts
Source components: WHEELS.
Source record 10250950 at NHTSANHTSA communication ID: 10250949
NHTSA source summary · Original PDF not reviewed by Recallfolio
Steering wheel leather damage, all vehicles
Source components: STEERING.
Source record 10250949 at NHTSANHTSA communication ID: 10124754
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 48 number 13-54 dated September 13, 2013. Steering wheel appearance damaged due to external impact (e.g., contact with finger nails, zippers, watches, rings, etc.). External impact (e.g., contact with finger nails, zippers, watches, rings etc.) can cause damage to the appearance of the steering wheel. This type of damage is not warrantable, as numerous investigations have shown that there is no fault in material or workmanship.
Source components: STEERING.
Source record 10124754 at NHTSANHTSA communication ID: 10124760
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 87 number 13-46 dated October 21, 2013. The A/C Compressor has been diagnosed as faulty and will be replaced under warranty. When performing replacement of an A/C Compressor under warranty, the amount of refrigerant and oil recovered must be documented.
Source components: EQUIPMENT:APPLIANCE:AIR CONDITIONER.
Source record 10124760 at NHTSANHTSA communication ID: 10124745
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 91 number 14-24 dated January 24, 2014. The Audi MMI system will not play audio files from an SD card. The MMI system does not recognize the audio files on the SD card. The MMI system reports that the audio files on the SD card are damaged. The audio files on the SD card will play on one Audi vehicle, but will not play on a different Audi vehicle. The vehicle is equipped with RNS-E, Concert Radio with SD card slot, MMI3G, MMI3G+, or MIB.
Source components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC..
Source record 10124745 at NHTSANHTSA communication ID: 10124751
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 44 number 13-46 dated December 9, 2013. Wheel bolt requires torque adjustment.
Source components: WHEELS.
Source record 10124751 at NHTSANHTSA communication ID: 10250947
NHTSA source summary · Original PDF not reviewed by Recallfolio
Rattling or knocking noise from front end when driving over bumps
Source components: SUSPENSION.
Source record 10250947 at NHTSANHTSA communication ID: 10250667
NHTSA source summary · Original PDF not reviewed by Recallfolio
Rattling or knocking noise from front end when driving over bumps
Source components: BACK OVER PREVENTION.
Source record 10250667 at NHTSANHTSA communication ID: 10124750
NHTSA source summary · Original PDF not reviewed by Recallfolio
Supersedes Technical Service Bulletin Group 40 number 14-42 dated July 8, 2014. A rattling or knocking noise is heard when the car is driven over bumps or uneven road surfaces. This noise is heard after the car has been driven for a while and is warmed up, and when the temperature outside is warm. This condition can be duplicated if the brakes are applied while the car is being driven over bumpy roads. This condition is a comfort concern. Vehicle handling is not affected. This bulletin applies only to vehicles equipped with 75mm hydro-bushings. This bulletin does not apply to vehicles equipped with 65mm bushings. High ambient temperatures at the hydraulic guide links cause the noise.
Source components: SUSPENSION.
Source record 10124750 at NHTSANHTSA communication ID: 10066025
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Source components: SERVICE BRAKES, HYDRAULIC.
Source record 10066025 at NHTSA