The manufacturer’s record · Page 1 of 2
Original record summaries, dates and identifiers for this model-year. Records 1–100 of 181, ordered newest first. Dated records on this page: May 20, 2024–Aug 24, 2026.
Back to 2023 Toyota TUNDRA problems & recallsThis archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
NHTSA communication ID: 11037203
NHTSA source summary · Original PDF not reviewed by Recallfolio
OBSOLETE NOTICE August 24, 2026: This bulletin is now obsolete. Please see T-SB-0032-26
Campaign / software reference: T-SB-0111-22 Obsolete
Source components: POWER TRAIN.
Source record 11037203 at NHTSANHTSA communication ID: 11037197
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers of 2022 – 2026 model year Tundra vehicles equipped with specifically non-hybrid V35A-FTS engines may experience one or more of the following drivability related concerns: • Hesitation from a rolling stop. • Hesitation from a quick stop.
Campaign / software reference: T-SB-0032-26 Rev1
Source components: POWER TRAIN.
Source record 11037197 at NHTSANHTSA communication ID: 11036116
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 – 2026 model year Tundra, Tundra Hybrid, and 2023 – 2026 model year Sequoia Hybrid vehicles may exhibit a condition where the front brakes produce a squealing noise when driving forward or in reverse
Campaign / software reference: T-SB-0022-25 Rev2
Source components: SERVICE BRAKES.
Source record 11036116 at NHTSANHTSA communication ID: 11034824
NHTSA source summary · Original PDF not reviewed by Recallfolio
TECHNICAL INSTRUCTIONS FOR SPECIAL SERVICE CAMPAIGN 26TC02 REPROGRAMMING FOR PARKING ASSIST ECU CERTAIN 2022 - 2024 TUNDRA / TUNDRA HYBRID
Campaign / software reference: 26TC02
Source components: ELECTRICAL SYSTEM.
Source record 11034824 at NHTSANHTSA communication ID: 11033402
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers of 2022 – 2026 model year Tundra vehicles equipped with specifically non-hybridV35A-FTS engines may experience one or more of the following drivability related concerns: • Hesitation from a rolling stop. • Hesitation from a quick stop. The Transmission Control Module (TCM) logic has been modified to address these conditions.
Campaign / software reference: T-SB-0032-26
Source components: POWER TRAIN.
Source record 11033402 at NHTSANHTSA communication ID: 11031166
NHTSA source summary · Original PDF not reviewed by Recallfolio
OBSOLETE NOTICE March 31, 2026: This bulletin is now obsolete. Please see T-SB-0022-26.
Campaign / software reference: T-SB-0020-25 Rev2
Source components: STRUCTURE:BODY.
Source record 11031166 at NHTSANHTSA communication ID: 11031165
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 – 2025 model year Tundra and Tundra Hybrid, and 2023 – 2025 model year Sequoia Hybrid vehicles may exhibit a high pitch whistling noise coming from one or both outer rear-view mirrors while driving 65 – 85 mph (105 – 137 km/h).
Campaign / software reference: T-SB-0022-26
Source components: STRUCTURE:BODY.
Source record 11031165 at NHTSANHTSA communication ID: 11031162
NHTSA source summary · Original PDF not reviewed by Recallfolio
SPECIAL SERVICE CAMPAIGN 26TC02 Certain 2023-2024 Model Year Sequoia HV Certain 2022 – 2023 Model Year Tundra & Tundra HV Trailer Back Up Guide Feature Inoperative Frequently Asked Questions
Campaign / software reference: 26TC02
Source components: ELECTRICAL SYSTEM.
Source record 11031162 at NHTSANHTSA communication ID: 11031160
NHTSA source summary · Original PDF not reviewed by Recallfolio
TECHNICAL INSTRUCTIONS FOR SPECIAL SERVICE CAMPAIGN 26TC02 REPROGRAMMING FOR PARKING ASSIST ECU CERTAIN 2022 - 2024 TUNDRA / TUNDRA HYBRID
Campaign / software reference: 26TC02
Source components: ELECTRICAL SYSTEM.
Source record 11031160 at NHTSANHTSA communication ID: 11031159
NHTSA source summary · Original PDF not reviewed by Recallfolio
After calibrating a trailer and using the Trailer Backup Guide feature, subsequent use of this feature may result in a “Trailer not detected” message or a blank multimedia display that prevents the display of features such as the backup camera. The multimedia system returns to normal if the vehicle is turned off and on again with no trailer attached.
Campaign / software reference: 26TC02
Source components: ELECTRICAL SYSTEM.
Source record 11031159 at NHTSANHTSA communication ID: 11028712
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2005 – 2026 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
Campaign / software reference: T-SB-0055-24 Rev2
Source components: UNKNOWN OR OTHER.
Source record 11028712 at NHTSANHTSA communication ID: 11026319
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 – 2026 model year Tundra, Tundra Hybrid, and 2023 – 2026 model year Sequoia Hybrid vehicles may exhibit a condition where the front brakes produce a squealing noise when driving forward or in reverse.
Campaign / software reference: T-SB-0022-25 Rev1
Source components: SERVICE BRAKES.
Source record 11026319 at NHTSANHTSA communication ID: 11026306
NHTSA source summary · Original PDF not reviewed by Recallfolio
A new head unit software update is available for 2022 – 2025 model year Tundra, and Tundra Hybrid; 2023 – 2025 model year Corolla Cross, Corolla Cross Hybrid, Highlander, Highlander Hybrid, Mirai, and Sequoia Hybrid vehicles equipped with Toyota Multimedia versions earlier than version 2230.
Campaign / software reference: T-SB-0083-25
Source components: ELECTRICAL SYSTEM.
Source record 11026306 at NHTSANHTSA communication ID: 11026305
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 – 2025 model year Tundra and Tundra Hybrid, and 2023 – 2025 model year Sequoia Hybrid vehicles may exhibit a high pitch whistling noise coming from one or both outer rear-view mirrors while driving 65 – 85 mph (105 – 137 kph).
Campaign / software reference: T-SB-0020-25 Rev2
Source components: STRUCTURE:BODY.
Source record 11026305 at NHTSANHTSA communication ID: 11020662
NHTSA source summary · Original PDF not reviewed by Recallfolio
Customers may experience the front seat side shield cracking on the lower portion. The lower clip attachment point may not be seated due to mispositioning during shield installation. If not properly aligned during installation clip will shift up and sit on top of attachment point
Campaign / software reference: T-TT-0787-25
Source components: STRUCTURE:BODY.
Source record 11020662 at NHTSANHTSA communication ID: 11020657
NHTSA source summary · Original PDF not reviewed by Recallfolio
The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks.
Campaign / software reference: T-SB-0058-23 Rev1
Source components: ELECTRICAL SYSTEM.
Source record 11020657 at NHTSANHTSA communication ID: 11019362
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 – 2025 model year Tundra and Tundra Hybrid, and 2023 – 2025 model year Sequoia Hybrid vehicles may exhibit a high pitch whistling noise coming from one or both outer rear view mirrors while driving 65 – 85 mph (105 – 137 kph).
Campaign / software reference: T-SB-0020-25 Rev1
Source components: STRUCTURE:BODY.
Source record 11019362 at NHTSANHTSA communication ID: 11018359
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 – 2025 model year Tundra and Tundra Hybrid, and 2023 – 2025 model year Sequoia Hybrid vehicles may exhibit a high pitch whistling noise coming from one or both outer rear view mirrors while driving 65 – 85 mph (105 – 137 kph).
Campaign / software reference: T-SB-0020-25 Rev1
Source components: STRUCTURE:BODY.
Source record 11018359 at NHTSANHTSA communication ID: 11019331
NHTSA source summary · Original PDF not reviewed by Recallfolio
To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.
Campaign / software reference: T-TT-0779-25
Source components: ELECTRICAL SYSTEM.
Source record 11019331 at NHTSANHTSA communication ID: 11018328
NHTSA source summary · Original PDF not reviewed by Recallfolio
To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.
Campaign / software reference: T-TT-0779-25
Source components: ELECTRICAL SYSTEM.
Source record 11018328 at NHTSANHTSA communication ID: 11016796
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2023 – 2024 model year Sequoia Hybrid and 2022 – 2024 Tundra and Tundra Hybrid vehicles may exhibit a condition where the functionality of the power driver seat cushion length adjustment (CLA) is inoperative. This condition may occur when operating the control switch with the CLA in the closed position.
Campaign / software reference: T-SB-0053-24 Rev1
Source components: ELECTRICAL SYSTEM · STRUCTURE:BODY.
Source record 11016796 at NHTSANHTSA communication ID: 11015510
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2023 – 2024 model year Sequoia Hybrid and 2022 – 2024 Tundra and Tundra Hybrid vehicles may exhibit a condition where the functionality of the power driver seat cushion length adjustment (CLA) is inoperative. This condition may occur when operating the control switch with the CLA in the closed position.
Campaign / software reference: T-SB-0053-24 Rev1
Source components: ELECTRICAL SYSTEM · STRUCTURE:BODY.
Source record 11015510 at NHTSANHTSA communication ID: 11016788
NHTSA source summary · Original PDF not reviewed by Recallfolio
OBSOLETE NOTICE February 13, 2025: This bulletin is now obsolete. Please see T-SB-0022-25.
Campaign / software reference: T-SB-0043-24 Obsolete
Source components: SERVICE BRAKES.
Source record 11016788 at NHTSANHTSA communication ID: 11015882
NHTSA source summary · Original PDF not reviewed by Recallfolio
OBSOLETE NOTICE February 11, 2025: This bulletin is now obsolete. Please see T-SB-0021-25.
Campaign / software reference: T-SB-0107-20 Rev2
Source components: ENGINE.
Source record 11015882 at NHTSANHTSA communication ID: 11015502
NHTSA source summary · Original PDF not reviewed by Recallfolio
OBSOLETE NOTICE February 13, 2025: This bulletin is now obsolete. Please see T-SB-0022-25.
Campaign / software reference: T-SB-0043-24 Obsolete
Source components: SERVICE BRAKES.
Source record 11015502 at NHTSANHTSA communication ID: 11016783
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2023 – 2025 model year Sequoia Hybrid, and 2022 – 2025 model year Tundra and Tundra Hybrid vehicles may exhibit a condition where the front brakes produce a squealing noise when driving forward or in reverse.
Campaign / software reference: T-SB-0022-25
Source components: SERVICE BRAKES.
Source record 11016783 at NHTSANHTSA communication ID: 11016782
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+) ECU flash reprogramming procedures and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard+ (CUW+). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the GTS+ ECU flash reprogramming process.
Campaign / software reference: T-SB-0021-25
Source components: ENGINE.
Source record 11016782 at NHTSANHTSA communication ID: 11016781
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.
Campaign / software reference: T-SB-0013-24 Rev1
Source components: ELECTRICAL SYSTEM.
Source record 11016781 at NHTSANHTSA communication ID: 11015497
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2023 – 2025 model year Sequoia Hybrid, and 2022 – 2025 model year Tundra and Tundra Hybrid vehicles may exhibit a condition where the front brakes produce a squealing noise when driving forward or in reverse.
Campaign / software reference: T-SB-0022-25
Source components: SERVICE BRAKES.
Source record 11015497 at NHTSANHTSA communication ID: 11015496
NHTSA source summary · Original PDF not reviewed by Recallfolio
Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+) ECU flash reprogramming procedures and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard+ (CUW+). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the GTS+ ECU flash reprogramming process.
Campaign / software reference: T-SB-0021-25
Source components: ENGINE.
Source record 11015496 at NHTSANHTSA communication ID: 11015495
NHTSA source summary · Original PDF not reviewed by Recallfolio
The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.
Campaign / software reference: T-SB-0013-24 Rev1
Source components: ELECTRICAL SYSTEM.
Source record 11015495 at NHTSANHTSA communication ID: 11016776
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 – 2025 model year Tundra and Tundra Hybrid, and 2023 – 2025 model year Sequoia Hybrid vehicles may exhibit a high pitch whistling noise coming from one or both outer rear view mirrors while driving 65 – 85 mph (105 – 137 kph).
Campaign / software reference: T-SB-0020-25
Source components: STRUCTURE:BODY.
Source record 11016776 at NHTSANHTSA communication ID: 11015490
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 – 2025 model year Tundra and Tundra Hybrid, and 2023 – 2025 model year Sequoia Hybrid vehicles may exhibit a high pitch whistling noise coming from one or both outer rear view mirrors while driving 65 – 85 mph (105 – 137 kph).
Campaign / software reference: T-SB-0020-25
Source components: STRUCTURE:BODY.
Source record 11015490 at NHTSANHTSA communication ID: 11014211
NHTSA source summary · Original PDF not reviewed by Recallfolio
OBSOLETE NOTICE January 30, 2025: This bulletin is now obsolete. Please see T-SB-0015-25.
Campaign / software reference: T-SB-0120-20 Rev2
Source components: ELECTRICAL SYSTEM.
Source record 11014211 at NHTSANHTSA communication ID: 11014209
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2021 – 2025 model year Toyota vehicles may require the download and installation of vehicle specific software or configuration software when the Electronic Control Unit (ECU) is replaced. GTS+ software has been modified to indicate when configuration software is required. A new Configure column has been added to the GTS+ Health Check Results screen to show when configuration software is available for a specific ECU.
Campaign / software reference: T-SB-0015-25
Source components: ELECTRICAL SYSTEM.
Source record 11014209 at NHTSANHTSA communication ID: 11014193
NHTSA source summary · Original PDF not reviewed by Recallfolio
OBSOLETE NOTICE January 23, 2025: This bulletin is now obsolete. Please see T-SB-0011-25.
Campaign / software reference: T-SB-0111-20 Rev2
Source components: ELECTRICAL SYSTEM.
Source record 11014193 at NHTSANHTSA communication ID: 11014190
NHTSA source summary · Original PDF not reviewed by Recallfolio
When certain vehicle ECUs are replaced, the ECU Security Key must be written in order for that ECU to communicate on the vehicle network. The GTS+ Software Health Check Results screen has been enhanced to help identify if a replacement ECU requires an ECU Security Key.
Campaign / software reference: T-SB-0011-25
Source components: ELECTRICAL SYSTEM.
Source record 11014190 at NHTSANHTSA communication ID: 10248823
NHTSA source summary · Original PDF not reviewed by Recallfolio
TI: TECHNICAL INSTRUCTIONS FOR 23TJ01 Second Key Delivery Program Multiple Models and Model Years
Source components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER.
Source record 10248823 at NHTSANHTSA communication ID: 10248822
NHTSA source summary · Original PDF not reviewed by Recallfolio
RL: The supply of Smart Keys available for Toyota vehicles has been temporarily limited to one (1) on select models since October 2022 due to global semiconductor shortages impacting certain microchips. Affected vehicles have been delivered with only one Smart Key and a second mechanical key.
Source components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER.
Source record 10248822 at NHTSANHTSA communication ID: 10248821
NHTSA source summary · Original PDF not reviewed by Recallfolio
DP: The subject vehicles were delivered with only one (1) Smart Key on select models since October 2022 due to a global semiconductor shortage impacting certain microchips. The affected vehicles were delivered with one (1) Smart Key and a second mechanical key.
Source components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER.
Source record 10248821 at NHTSANHTSA communication ID: 11012759
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 – 2024 model year Tundra and 2023 model year Highlander vehicles may exhibit a MIL ON condition with Diagnostic Trouble Codes (DTCs) P162B87 (Lost Communication with Battery Monitor Module Missing Message) and/or P15AD87 (Active Grille Air Shutter "A" Missing) present. The battery state sensor assembly has been updated to prevent the condition from occurring.
Campaign / software reference: T-SB-0050-24 Rev2
Source components: ELECTRICAL SYSTEM.
Source record 11012759 at NHTSANHTSA communication ID: 11012758
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2023 – 2024 model year Sequoia Hybrid, and 2022 – 2024 Tundra and Tundra Hybrid vehicles may exhibit a condition where the driver and/or front passenger seat back frame produces a creaking or squeaking noise when leaning back on it.
Campaign / software reference: T-SB-0119-24
Source components: STRUCTURE:BODY.
Source record 11012758 at NHTSANHTSA communication ID: 11012755
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles in the market may require a short block repair, and in certain circumstances, Toyota may request a dealer to repair such vehicles with an Engine Assembly instead.
Campaign / software reference: T-TT-0766-24 Rev1
Source components: ENGINE.
Source record 11012755 at NHTSANHTSA communication ID: 11012744
NHTSA source summary · Original PDF not reviewed by Recallfolio
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
Campaign / software reference: T-SB-0039-24 Rev2
Source components: STRUCTURE:BODY.
Source record 11012744 at NHTSANHTSA communication ID: 11012743
NHTSA source summary · Original PDF not reviewed by Recallfolio
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
Campaign / software reference: T-SB-0038-24 Rev2
Source components: STRUCTURE:BODY.
Source record 11012743 at NHTSANHTSA communication ID: 11012742
NHTSA source summary · Original PDF not reviewed by Recallfolio
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Campaign / software reference: T-SB-0035-24 Rev2
Source components: STRUCTURE:BODY.
Source record 11012742 at NHTSANHTSA communication ID: 11012735
NHTSA source summary · Original PDF not reviewed by Recallfolio
Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application.
Campaign / software reference: T-SB-0061-23 Rev2
Source components: STRUCTURE:BODY.
Source record 11012735 at NHTSANHTSA communication ID: 11012727
NHTSA source summary · Original PDF not reviewed by Recallfolio
Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
Campaign / software reference: T-SB-0062-23 Rev2
Source components: STRUCTURE:BODY.
Source record 11012727 at NHTSANHTSA communication ID: 11011639
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 – 2024 model year Tundra and Tundra Hybrid, 2023 – 2024 model year Sequoia Hybrid, and 2024 model year Tacoma and Tacoma Hybrid vehicles equipped with a premium 14-inch audio multimedia display may exhibit a condition where the radio receiver power/volume knob becomes detached. An updated radio receiver power/volume knob is available to reduce the possibility of this condition.
Campaign / software reference: T-SB-0100-24
Source components: ENGINE.
Source record 11011639 at NHTSANHTSA communication ID: 11010361
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table below describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010361 at NHTSANHTSA communication ID: 11010360
NHTSA source summary · Original PDF not reviewed by Recallfolio
SECOND KEY DELIVERY PROGRAM 23TJ01 Multiple Models and Model Years Second Key Delivery Program Frequently Asked Questions
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010360 at NHTSANHTSA communication ID: 11010359
NHTSA source summary · Original PDF not reviewed by Recallfolio
The supply of Smart Keys available for Toyota vehicles has been temporarily limited to one (1) on select models since October 2022 due to global semiconductor shortages impacting certain microchips. Affected vehicles have been delivered with only one Smart Key and a second mechanical key.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010359 at NHTSANHTSA communication ID: 11010358
NHTSA source summary · Original PDF not reviewed by Recallfolio
The subject vehicles were delivered with only one (1) Smart Key on select models since October 2022 due to a global semiconductor shortage impacting certain microchips. The affected vehicles were delivered with one (1) Smart Key and a second mechanical key.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010358 at NHTSANHTSA communication ID: 11010354
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 – 2024 model year Tundra and Tundra Hybrid, 2023 – 2024 model year Sequoia Hybrid, and 2024 model year Tacoma and Tacoma Hybrid vehicles equipped with a premium 14-inch audio multimedia display may exhibit a condition where the radio receiver power/volume knob becomes detached. An updated radio receiver power/volume knob is available to reduce the possibility of this condition.
Campaign / software reference: T-SB-0100-24
Source components: ELECTRICAL SYSTEM.
Source record 11010354 at NHTSANHTSA communication ID: 11010344
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some vehicles in the market may require a short block repair, and in certain circumstances, Toyota may request a dealer to repair such vehicles with an Engine Assembly instead. Please follow the recommendations below in addition to the steps for Partial Engine replacement in the repair manual when performing engine replacement with Part Number 04004-23370.
Campaign / software reference: T-TT-0766-24
Source components: ENGINE.
Source record 11010344 at NHTSANHTSA communication ID: 11010334
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 – 2024 model year Tundra and 2023 model year Highlander vehicles may exhibit a MIL ON condition with Diagnostic Trouble Codes (DTCs) P162B87 (Lost Communication with Battery Monitor Module Missing Message) and/or P15AD87 (Active Grille Air Shutter "A" Missing) present. The battery state sensor assembly has been updated to prevent the condition from occurring.
Campaign / software reference: T-SB-0050-24 Rev1
Source components: ELECTRICAL SYSTEM.
Source record 11010334 at NHTSANHTSA communication ID: 11010108
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2023 – 2024 model year Sequoia Hybrid and 2022 – 2024 model year Tundra and Tundra Hybrid vehicles may exhibit a MIL ON condition with one or more of the following Diagnostic Trouble Codes (DTCs) present: •P030000 – Random/Multiple Cylinder Misfire Detected •P030027 – Random/Multiple Cylinder Misfire Detected (Emission) Signal Rate of Change Above Threshold •P030085 – Random/Multiple Cylinder Misfire Detected (Over Temperature) Signal Above Allowable Range The Engine Control Module (ECM) (SAE term: Powertrain Control Module / PCM) logic has been modified to address this condition.
Campaign / software reference: T-SB-0085-24
Source components: ENGINE.
Source record 11010108 at NHTSANHTSA communication ID: 11010105
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table below describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010105 at NHTSANHTSA communication ID: 11010104
NHTSA source summary · Original PDF not reviewed by Recallfolio
SECOND KEY DELIVERY PROGRAM Frequently Asked Questions
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010104 at NHTSANHTSA communication ID: 11010103
NHTSA source summary · Original PDF not reviewed by Recallfolio
The subject vehicles were delivered with only one (1) Smart Key on select models since October 2022 due to a global semiconductor shortage impacting certain microchips. The affected vehicles were delivered with one (1) Smart Key and a second mechanical key.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010103 at NHTSANHTSA communication ID: 11010072
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 – 2024 model year Tundra and Tundra Hybrid vehicles may exhibit a condition in which the rear bumper outer end covers have become loose causing an excessive gap on the right-hand and/or the left-hand side. The attaching flange bolts have been updated to address this condition.
Campaign / software reference: T-SB-0080-24
Source components: STRUCTURE:BODY.
Source record 11010072 at NHTSANHTSA communication ID: 11010068
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010068 at NHTSANHTSA communication ID: 11010067
NHTSA source summary · Original PDF not reviewed by Recallfolio
The subject vehicles were delivered with only one (1) Smart Key on select models since October 2022 due to a global semiconductor shortage impacting certain microchips. The affected vehicles were delivered with one (1) Smart Key and a second mechanical key.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11010067 at NHTSANHTSA communication ID: 11010064
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2023 – 2024 model year Sequoia Hybrid, and 2022 – 2024 model year Tundra and Tundra Hybrid vehicles may exhibit a condition where the front brakes produce a squealing noise when driving forward or in reverse.
Campaign / software reference: T-SB-0043-24 Rev2
Source components: SERVICE BRAKES.
Source record 11010064 at NHTSANHTSA communication ID: 11010059
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some customers have expressed concern that the wireless functions of their Key Fob stop working. Key Fob LEDs will not turn ON, but engine starts with key held up against start button. Key battery voltage is confirmed OK and no DTC/RoB is found. This condition may occur if customer places Key Fob near wireless charger while phone is charging. When the key battery is removed and reinstalled, the Key Fob begins to operate normally.
Campaign / software reference: T-TT-0751-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11010059 at NHTSANHTSA communication ID: 11010058
NHTSA source summary · Original PDF not reviewed by Recallfolio
During repairs such as those listed below, damage may occur if the Torque Converter Assembly is not properly installed. • Hybrid module assembly removal/installation • Transmission removal/installation • Engine removal/installation
Campaign / software reference: T-TT-0748-24 Rev1
Source components: POWER TRAIN.
Source record 11010058 at NHTSANHTSA communication ID: 11007455
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
Campaign / software reference: T-SB-0055-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11007455 at NHTSANHTSA communication ID: 11006161
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
Campaign / software reference: T-SB-0055-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11006161 at NHTSANHTSA communication ID: 11007445
NHTSA source summary · Original PDF not reviewed by Recallfolio
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
Campaign / software reference: T-SB-0039-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11007445 at NHTSANHTSA communication ID: 11007444
NHTSA source summary · Original PDF not reviewed by Recallfolio
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
Campaign / software reference: T-SB-0038-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11007444 at NHTSANHTSA communication ID: 11007443
NHTSA source summary · Original PDF not reviewed by Recallfolio
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Campaign / software reference: T-SB-0035-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11007443 at NHTSANHTSA communication ID: 11006151
NHTSA source summary · Original PDF not reviewed by Recallfolio
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
Campaign / software reference: T-SB-0039-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11006151 at NHTSANHTSA communication ID: 11006150
NHTSA source summary · Original PDF not reviewed by Recallfolio
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
Campaign / software reference: T-SB-0038-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11006150 at NHTSANHTSA communication ID: 11006149
NHTSA source summary · Original PDF not reviewed by Recallfolio
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Campaign / software reference: T-SB-0035-24 Rev1
Source components: STRUCTURE:BODY.
Source record 11006149 at NHTSANHTSA communication ID: 11007440
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2023 – 2024 model year Sequoia Hybrid, and 2022 – 2024 model year Tundra and Tundra Hybrid vehicles may exhibit a condition where the front brakes produce a squealing noise when driving forward or in reverse.
Campaign / software reference: T-SB-0043-24 Rev1
Source components: SERVICE BRAKES.
Source record 11007440 at NHTSANHTSA communication ID: 11006146
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2023 – 2024 model year Sequoia Hybrid, and 2022 – 2024 model year Tundra and Tundra Hybrid vehicles may exhibit a condition where the front brakes produce a squealing noise when driving forward or in reverse.
Campaign / software reference: T-SB-0043-24 Rev1
Source components: SERVICE BRAKES.
Source record 11006146 at NHTSANHTSA communication ID: 11007434
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 – 2024 model year Tundra and Tundra Hybrid, and 2023 – 2024 model year Sequoia Hybrid vehicles, equipped with a JBL® premium sound system, may exhibit a rattle or buzz noise when listening to music coming from the subwoofer located in the rear left luggage area of the vehicle. This can be caused by exposure to certain operating environments with high humidity levels. To improve the subwoofer's performance in humid environments, Toyota has revised the speaker cone material and shape. The condition can be resolved by replacing the subwoofer assembly with box.
Campaign / software reference: T-SB-0026-24 Rev1
Source components: ELECTRICAL SYSTEM.
Source record 11007434 at NHTSANHTSA communication ID: 11006140
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 – 2024 model year Tundra and Tundra Hybrid, and 2023 – 2024 model year Sequoia Hybrid vehicles, equipped with a JBL® premium sound system, may exhibit a rattle or buzz noise when listening to music coming from the subwoofer located in the rear left luggage area of the vehicle. This can be caused by exposure to certain operating environments with high humidity levels. To improve the subwoofer's performance in humid environments, Toyota has revised the speaker cone material and shape. The condition can be resolved by replacing the subwoofer assembly with box.
Campaign / software reference: T-SB-0026-24 Rev1
Source components: ELECTRICAL SYSTEM.
Source record 11006140 at NHTSANHTSA communication ID: 11005122
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
Campaign / software reference: T-SB-0055-24
Source components: STRUCTURE:BODY.
Source record 11005122 at NHTSANHTSA communication ID: 11005064
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
Campaign / software reference: T-SB-0055-24
Source components: STRUCTURE:BODY.
Source record 11005064 at NHTSANHTSA communication ID: 11005119
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 – 2025 model year Toyota vehicles.
Campaign / software reference: T-SB-0103-20 Rev1
Source components: ENGINE.
Source record 11005119 at NHTSANHTSA communication ID: 11005061
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 – 2025 model year Toyota vehicles.
Campaign / software reference: T-SB-0103-20 Rev1
Source components: ENGINE.
Source record 11005061 at NHTSANHTSA communication ID: 11005098
NHTSA source summary · Original PDF not reviewed by Recallfolio
Second Key Delivery Program Frequently Asked Questions
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005098 at NHTSANHTSA communication ID: 11005097
NHTSA source summary · Original PDF not reviewed by Recallfolio
The supply of Smart Keys available for Toyota vehicles has been temporarily limited to one (1) on select models since October 2022 due to global semiconductor shortages impacting certain microchips. Affected vehicles have been delivered with only one Smart Key and a second mechanical key.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005097 at NHTSANHTSA communication ID: 11005094
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005094 at NHTSANHTSA communication ID: 11005040
NHTSA source summary · Original PDF not reviewed by Recallfolio
Second Key Delivery Program Frequently Asked Questions
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005040 at NHTSANHTSA communication ID: 11005039
NHTSA source summary · Original PDF not reviewed by Recallfolio
The supply of Smart Keys available for Toyota vehicles has been temporarily limited to one (1) on select models since October 2022 due to global semiconductor shortages impacting certain microchips. Affected vehicles have been delivered with only one Smart Key and a second mechanical key.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005039 at NHTSANHTSA communication ID: 11005036
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005036 at NHTSANHTSA communication ID: 11005093
NHTSA source summary · Original PDF not reviewed by Recallfolio
A head unit software update is now available for 2022 model year Tundra and Tundra Hybrid vehicles equipped with Toyota Multimedia (version 1020 or earlier). This software update provides improved performance and capability for the following: •User Profile configuration and display. •Cloud Navigation and Intelligent Voice Assistant. •Mobile device connectivity. •On-screen display and system settings/configuration. •Security enhancements. A head unit software update is now available for 2022 model year Tundra and Tundra Hybrid vehicles equipped with Toyota Multimedia (earlier than version 1040). This software update includes the following improvements: •Cloud navigation. •Intelligent assistant voice recognition. •Showing and controlling explicit audio content. •User interface. •Bluetooth®. •Bug fixes. This software update removes the following feature: •Hybrid radio. A head unit software update is now available for 2023 model year Sequoia Hybrid, Tundra, and Tundra Hybrid, vehicles equipped with Toyota Multimedia (version 1040 or earlier). This software update provides improved performance and capability for the following: •User Profile. •Over-the-air (OTA) notifications. •Ability to search during a call. •Bug fixes settings/configuration. •Security enhancements. A head unit software update is now available for 2023 – 2024 Sequoia Hybrid, and 2022 – 2024 model year Tundra and Tundra Hybrid vehicles equipped with Toyota Multimedia (earlier than version 2050). This software update includes the following improvements: •User interface design. •Intelligent assistant. •Navigation lane guidance. •Phone book search. •Bug fixes. A head unit software update is now available for 2023 – 2024 Sequoia Hybrid, and 2022 – 2024 model year Tundra and Tundra Hybrid vehicles equipped with Toyota Multimedia (earlier than version 2170). This software update includes the following improvements: •User Profile. •User interface. •Cloud navigation. •Intelligent assistant voice recognition. •Bug fixes.
Campaign / software reference: T-SB-0012-24 Rev1
Source components: ELECTRICAL SYSTEM.
Source record 11005093 at NHTSANHTSA communication ID: 11005035
NHTSA source summary · Original PDF not reviewed by Recallfolio
A head unit software update is now available for 2022 model year Tundra and Tundra Hybrid vehicles equipped with Toyota Multimedia (version 1020 or earlier). This software update provides improved performance and capability for the following: •User Profile configuration and display. •Cloud Navigation and Intelligent Voice Assistant. •Mobile device connectivity. •On-screen display and system settings/configuration. •Security enhancements. A head unit software update is now available for 2022 model year Tundra and Tundra Hybrid vehicles equipped with Toyota Multimedia (earlier than version 1040). This software update includes the following improvements: •Cloud navigation. •Intelligent assistant voice recognition. •Showing and controlling explicit audio content. •User interface. •Bluetooth®. •Bug fixes. This software update removes the following feature: •Hybrid radio. A head unit software update is now available for 2023 model year Sequoia Hybrid, Tundra, and Tundra Hybrid, vehicles equipped with Toyota Multimedia (version 1040 or earlier). This software update provides improved performance and capability for the following: •User Profile. •Over-the-air (OTA) notifications. •Ability to search during a call. •Bug fixes settings/configuration. •Security enhancements. A head unit software update is now available for 2023 – 2024 Sequoia Hybrid, and 2022 – 2024 model year Tundra and Tundra Hybrid vehicles equipped with Toyota Multimedia (earlier than version 2050). This software update includes the following improvements: •User interface design. •Intelligent assistant. •Navigation lane guidance. •Phone book search. •Bug fixes. A head unit software update is now available for 2023 – 2024 Sequoia Hybrid, and 2022 – 2024 model year Tundra and Tundra Hybrid vehicles equipped with Toyota Multimedia (earlier than version 2170). This software update includes the following improvements: •User Profile. •User interface. •Cloud navigation. •Intelligent assistant voice recognition. •Bug fixes.
Campaign / software reference: T-SB-0012-24 Rev1
Source components: ELECTRICAL SYSTEM.
Source record 11005035 at NHTSANHTSA communication ID: 11005083
NHTSA source summary · Original PDF not reviewed by Recallfolio
Second Key Delivery Program
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005083 at NHTSANHTSA communication ID: 11005082
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005082 at NHTSANHTSA communication ID: 11005025
NHTSA source summary · Original PDF not reviewed by Recallfolio
Second Key Delivery Program
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005025 at NHTSANHTSA communication ID: 11005024
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005024 at NHTSANHTSA communication ID: 11005079
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2023 – 2024 model year Sequoia Hybrid and 2022 – 2024 Tundra and Tundra Hybrid vehicles may exhibit a condition where the functionality of the power driver seat cushion length adjustment (CLA) is inoperative. This condition may occur when operating the control switch with the CLA in the closed position.
Campaign / software reference: T-SB-0053-24
Source components: STRUCTURE:BODY.
Source record 11005079 at NHTSANHTSA communication ID: 11005021
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2023 – 2024 model year Sequoia Hybrid and 2022 – 2024 Tundra and Tundra Hybrid vehicles may exhibit a condition where the functionality of the power driver seat cushion length adjustment (CLA) is inoperative. This condition may occur when operating the control switch with the CLA in the closed position.
Campaign / software reference: T-SB-0053-24
Source components: STRUCTURE:BODY.
Source record 11005021 at NHTSANHTSA communication ID: 11005181
NHTSA source summary · Original PDF not reviewed by Recallfolio
Second Key Delivery Program Frequently Asked Questions
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005181 at NHTSANHTSA communication ID: 11005180
NHTSA source summary · Original PDF not reviewed by Recallfolio
The table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated during each phase launch and as more details become available.
Campaign / software reference: 23TJ01
Source components: UNKNOWN OR OTHER.
Source record 11005180 at NHTSANHTSA communication ID: 11005156
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2023 – 2024 model year Sequoia Hybrid and 2022 – 2024 model year Tundra and Tundra Hybrid vehicles may exhibit lack of power during acceleration and/or a MIL ON condition with one or more of the following Diagnostic Trouble Codes (DTCs): •P017400 – System Too Lean Bank 2 •P117B00 – Fuel Performance/Direct Injector •P043000 – Catalyst System Efficiency Below Threshold Bank 2
Campaign / software reference: T-SB-0030-23 Rev2
Source components: STRUCTURE:BODY.
Source record 11005156 at NHTSANHTSA communication ID: 11005154
NHTSA source summary · Original PDF not reviewed by Recallfolio
Some 2022 – 2024 model year Tundra vehicles may exhibit a MIL ON condition with Diagnostic Trouble Codes (DTCs) P162B87 (Lost Communication with Battery Monitor Module Missing Message) and/or P15AD87 (Active Grille Air Shutter "A" Missing) present. The battery state sensor assembly has been updated to reduce the possibility of this condition.
Campaign / software reference: T-SB-0050-24
Source components: ELECTRICAL SYSTEM.
Source record 11005154 at NHTSA