2023 Toyota TACOMA
Manufacturer communications & TSBs.Page 1

T-SB-0106-22 Rev2

NHTSA communication ID: 11028726

NHTSA source summary · Original PDF not reviewed by Recallfolio

OBSOLETE NOTICE January 30, 2026: This bulletin is now obsolete. Please see T-SB-0001-26.

Campaign / software reference: T-SB-0106-22 Obsolete

Source components: ELECTRICAL SYSTEM.

T-SB-0001-26

NHTSA communication ID: 11028722

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2018 – 2024 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software.

Campaign / software reference: T-SB-0001-26

Source components: ELECTRICAL SYSTEM.

T-SB-0055-24 Rev2

NHTSA communication ID: 11028712

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2005 – 2026 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.

Campaign / software reference: T-SB-0055-24 Rev2

Source components: UNKNOWN OR OTHER.

T-TT-0780-25

NHTSA communication ID: 11019332

NHTSA source summary · Original PDF not reviewed by Recallfolio

To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.

Campaign / software reference: T-TT-0780-25

Source components: ELECTRICAL SYSTEM.

T-TT-0780-25

NHTSA communication ID: 11018329

NHTSA source summary · Original PDF not reviewed by Recallfolio

To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.

Campaign / software reference: T-TT-0780-25

Source components: ELECTRICAL SYSTEM.

T-SB-0106-22 Rev2

NHTSA communication ID: 11016786

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2018 – 2024 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations.

Campaign / software reference: T-SB-0106-22 Rev2

Source components: ELECTRICAL SYSTEM.

T-SB-0106-22 Rev2

NHTSA communication ID: 11015500

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2018 – 2024 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations.

Campaign / software reference: T-SB-0106-22 Rev2

Source components: ELECTRICAL SYSTEM.

T-SB-0039-24 Rev2

NHTSA communication ID: 11012744

NHTSA source summary · Original PDF not reviewed by Recallfolio

The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

Campaign / software reference: T-SB-0039-24 Rev2

Source components: STRUCTURE:BODY.

T-SB-0038-24 Rev2

NHTSA communication ID: 11012743

NHTSA source summary · Original PDF not reviewed by Recallfolio

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

Campaign / software reference: T-SB-0038-24 Rev2

Source components: STRUCTURE:BODY.

T-SB-0035-24 Rev2

NHTSA communication ID: 11012742

NHTSA source summary · Original PDF not reviewed by Recallfolio

Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

Campaign / software reference: T-SB-0035-24 Rev2

Source components: STRUCTURE:BODY.

T-SB-0061-23 Rev2

NHTSA communication ID: 11012735

NHTSA source summary · Original PDF not reviewed by Recallfolio

Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application.

Campaign / software reference: T-SB-0061-23 Rev2

Source components: STRUCTURE:BODY.

T-SB-0062-23 Rev2

NHTSA communication ID: 11012727

NHTSA source summary · Original PDF not reviewed by Recallfolio

Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.

Campaign / software reference: T-SB-0062-23 Rev2

Source components: STRUCTURE:BODY.

T-TT-0751-24 Rev1

NHTSA communication ID: 11010059

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some customers have expressed concern that the wireless functions of their Key Fob stop working. Key Fob LEDs will not turn ON, but engine starts with key held up against start button. Key battery voltage is confirmed OK and no DTC/RoB is found. This condition may occur if customer places Key Fob near wireless charger while phone is charging. When the key battery is removed and reinstalled, the Key Fob begins to operate normally.

Campaign / software reference: T-TT-0751-24 Rev1

Source components: STRUCTURE:BODY.

T-SB-0055-24 Rev1

NHTSA communication ID: 11007455

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.

Campaign / software reference: T-SB-0055-24 Rev1

Source components: STRUCTURE:BODY.

T-SB-0055-24 Rev1

NHTSA communication ID: 11006161

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.

Campaign / software reference: T-SB-0055-24 Rev1

Source components: STRUCTURE:BODY.

T-SB-0039-24 Rev1

NHTSA communication ID: 11007445

NHTSA source summary · Original PDF not reviewed by Recallfolio

The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

Campaign / software reference: T-SB-0039-24 Rev1

Source components: STRUCTURE:BODY.

T-SB-0038-24 Rev1

NHTSA communication ID: 11007444

NHTSA source summary · Original PDF not reviewed by Recallfolio

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

Campaign / software reference: T-SB-0038-24 Rev1

Source components: STRUCTURE:BODY.

T-SB-0035-24 Rev1

NHTSA communication ID: 11007443

NHTSA source summary · Original PDF not reviewed by Recallfolio

Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

Campaign / software reference: T-SB-0035-24 Rev1

Source components: STRUCTURE:BODY.

T-SB-0039-24 Rev1

NHTSA communication ID: 11006151

NHTSA source summary · Original PDF not reviewed by Recallfolio

The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

Campaign / software reference: T-SB-0039-24 Rev1

Source components: STRUCTURE:BODY.

T-SB-0038-24 Rev1

NHTSA communication ID: 11006150

NHTSA source summary · Original PDF not reviewed by Recallfolio

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

Campaign / software reference: T-SB-0038-24 Rev1

Source components: STRUCTURE:BODY.

T-SB-0035-24 Rev1

NHTSA communication ID: 11006149

NHTSA source summary · Original PDF not reviewed by Recallfolio

Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

Campaign / software reference: T-SB-0035-24 Rev1

Source components: STRUCTURE:BODY.

T-SB-0055-24

NHTSA communication ID: 11005122

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.

Campaign / software reference: T-SB-0055-24

Source components: STRUCTURE:BODY.

T-SB-0055-24

NHTSA communication ID: 11005064

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.

Campaign / software reference: T-SB-0055-24

Source components: STRUCTURE:BODY.

T-SB-0103-20 Rev1

NHTSA communication ID: 11005119

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 – 2025 model year Toyota vehicles.

Campaign / software reference: T-SB-0103-20 Rev1

Source components: ENGINE.

T-SB-0103-20 Rev1

NHTSA communication ID: 11005061

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 – 2025 model year Toyota vehicles.

Campaign / software reference: T-SB-0103-20 Rev1

Source components: ENGINE.

T-SB-0061-23 Rev1

NHTSA communication ID: 11005153

NHTSA source summary · Original PDF not reviewed by Recallfolio

Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.

Campaign / software reference: T-SB-0061-23 Rev1

Source components: STRUCTURE:BODY.

T-SB-0062-23 Rev1

NHTSA communication ID: 11005149

NHTSA source summary · Original PDF not reviewed by Recallfolio

Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.

Campaign / software reference: T-SB-0062-23 Rev1

Source components: STRUCTURE:BODY.

T-TT-0756-24

NHTSA communication ID: 11003654

NHTSA source summary · Original PDF not reviewed by Recallfolio

Phone call sound quality may be adjusted to fit the Tacoma owner’s preferences.

Campaign / software reference: T-TT-0756-24

Source components: ELECTRICAL SYSTEM.

T-TT-0756-24

NHTSA communication ID: 11003599

NHTSA source summary · Original PDF not reviewed by Recallfolio

Phone call sound quality may be adjusted to fit the Tacoma owner’s preferences.

Campaign / software reference: T-TT-0756-24

Source components: ELECTRICAL SYSTEM.

T-SB-0039-24

NHTSA communication ID: 11003649

NHTSA source summary · Original PDF not reviewed by Recallfolio

The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

Campaign / software reference: T-SB-0039-24

Source components: STRUCTURE:BODY.

T-SB-0038-24

NHTSA communication ID: 11003647

NHTSA source summary · Original PDF not reviewed by Recallfolio

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. •The entire bulletin has been updated.

Campaign / software reference: T-SB-0038-24

Source components: STRUCTURE:BODY.

T-SB-0035-24

NHTSA communication ID: 11003644

NHTSA source summary · Original PDF not reviewed by Recallfolio

Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

Campaign / software reference: T-SB-0035-24

Source components: STRUCTURE:BODY.

T-SB-0039-24

NHTSA communication ID: 11003594

NHTSA source summary · Original PDF not reviewed by Recallfolio

The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

Campaign / software reference: T-SB-0039-24

Source components: STRUCTURE:BODY.

T-SB-0038-24

NHTSA communication ID: 11003592

NHTSA source summary · Original PDF not reviewed by Recallfolio

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. •The entire bulletin has been updated.

Campaign / software reference: T-SB-0038-24

Source components: STRUCTURE:BODY.

T-SB-0035-24

NHTSA communication ID: 11003589

NHTSA source summary · Original PDF not reviewed by Recallfolio

Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

Campaign / software reference: T-SB-0035-24

Source components: STRUCTURE:BODY.

T-TT-0754-24

NHTSA communication ID: 11003619

NHTSA source summary · Original PDF not reviewed by Recallfolio

Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.

Campaign / software reference: T-TT-0754-24

Source components: ELECTRICAL SYSTEM.

T-TT-0754-24

NHTSA communication ID: 11003564

NHTSA source summary · Original PDF not reviewed by Recallfolio

Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.

Campaign / software reference: T-TT-0754-24

Source components: ELECTRICAL SYSTEM.

T-TT-0751-24

NHTSA communication ID: 11003607

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some customers have complained that the wireless functions of their Key Fob stop working. Key Fob LEDs will not turn ON, but engine starts with key held up against start button. Key battery voltage is confirmed OK and no DTC/RoB is found. This condition may occur if customer places Key Fob near wireless charger while phone is charging. When the key battery is removed and reinstalled, the Key Fob begins to operate normally.

Campaign / software reference: T-TT-0751-24

Source components: ELECTRICAL SYSTEM.

T-TT-0751-24

NHTSA communication ID: 11003552

NHTSA source summary · Original PDF not reviewed by Recallfolio

Some customers have complained that the wireless functions of their Key Fob stop working. Key Fob LEDs will not turn ON, but engine starts with key held up against start button. Key battery voltage is confirmed OK and no DTC/RoB is found. This condition may occur if customer places Key Fob near wireless charger while phone is charging. When the key battery is removed and reinstalled, the Key Fob begins to operate normally.

Campaign / software reference: T-TT-0751-24

Source components: ELECTRICAL SYSTEM.

T-PANT-2024-004-

NHTSA communication ID: 10253223

NHTSA source summary · Original PDF not reviewed by Recallfolio

This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.

Source components: ENGINE AND ENGINE COOLING · ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION.

TSB002620

NHTSA communication ID: 10247828

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: All 2020 ? 2023 model year 4Runner, 2018 ? 2022 model year Sequoia, 2018 ? 2023 model year Tacoma, and 2018 ? 2021 model year Tundra vehicles are equipped with Pre-collision System (PCS) and Dynamic Radar Cruise Control (DRCC) as part of the Toyota Safety Sense (TSS) package. The PCS and DRCC systems are designed to help mitigate a potential collision and maintain a pre-determined traveling distance. It is recommended to disable the PCS and DRCC systems on vehicles that have been modified (ride height, oversized wheels/tires, brush bars, etc.) in a way that potentially disrupts the functionality of these systems. Vehicle owner?s written consent is required before performing the calibration to permanently disable the PCS and DRCC systems. Follow the Repair Procedure in this bulletin to disable the PCS and DRCC systems.

Source components: AIR BAGS · ELECTRICAL SYSTEM:SOFTWARE · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL · FORWARD COLLISION AVOIDANCE · UNKNOWN OR OTHER.

TSB003220

NHTSA communication ID: 10244113

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.

Source components: AIR BAGS · EQUIPMENT · VEHICLE SPEED CONTROL.

TTT073723

NHTSA communication ID: 10244111

NHTSA source summary · Original PDF not reviewed by Recallfolio

TT: A very small percentage of customers experience operational difficulties with some telematics features which they cannot resolve on their own. These resources, in conjunction with the Repair Manual, are for dealership personnel to assist those customers with user issues, user errors, and compatibility issues with other vehicle systems and external applications encountered while operating telematics features. Toyota has developed and provided the following Telematics Diagnostic Guide to assist dealer technicians.

Source components: COMMUNICATION:MANUFACTURER TELEMATICS · UNKNOWN OR OTHER.

TSB011219

NHTSA communication ID: 10244108

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: Some 2005 ? 2023 model year Tacoma vehicles equipped with a manual transmission may exhibit a squeak or creak noise from the clutch pedal when it is depressed or released.

Source components: EQUIPMENT · POWER TRAIN.

T-SB-0045-23

NHTSA communication ID: 10241402

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: Some 2019 ? 2023 model year Tacoma Double Cab vehicles may exhibit a whine noise from the rear of the vehicle. This condition may occur while driving around 50 mph (80 kph) at constant speed, slight acceleration, or slight deceleration. This condition may be caused by rear differential vibration transferring through the chassis and body

Source components: BACK OVER PREVENTION · POWER TRAIN · SUSPENSION.

T-SB-0042-23

NHTSA communication ID: 10241387

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: Some 2023 ? 2024 model year Toyota vehicles use hub bolts in place of studs/nuts to fasten the wheels to the vehicle. If non-compatible wheels or hub bolts/nuts are installed, there is increased risk that the wheel(s) could come off resulting in a crash. This service bulletin outlines the physical differences and precautions that should be taken when servicing different wheel and wheel fastener types.

Source components: WHEELS.

T-SB-0057-18

NHTSA communication ID: 10238157

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.

Source components: ELECTRICAL SYSTEM · EQUIPMENT.

Accessory

NHTSA communication ID: 10238130

NHTSA source summary · Original PDF not reviewed by Recallfolio

This Toyota Genuine Power Port provides additional capability to your phone or tablet, so your devices always have power/charge. Includes two fast charging smart USB connectors with blue LED power status light. Applicable to MY21, MY22, and 2023 Tacoma

Source components: ELECTRICAL SYSTEM:WIRING:CONNECTORS/PLUGS:ACCESORY POWER OUTLET/JACK/PORT/USB/SAE/CIGARETTE LIGHTER.

T-SB-0033-19 Rev

NHTSA communication ID: 10234341

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: Some 2016 ? 2023 model year Tacoma vehicles may exhibit a condition where snow or ice builds up between the right or left front door and front fender, preventing the front door from fully opening. Follow the Repair Procedure in this bulletin to address this condition.

Source components: VEHICLE SPEED CONTROL.

T-SB-0033-19 Rev

NHTSA communication ID: 10234294

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: Some 2016 ? 2023 model year Tacoma vehicles may exhibit a condition where snow or ice builds up between the right or left front door and front fender, preventing the front door from fully opening. Follow the Repair Procedure in this bulletin to address this condition.

Source components: VEHICLE SPEED CONTROL.

T-TT-0721-23 Rev

NHTSA communication ID: 10234332

NHTSA source summary · Original PDF not reviewed by Recallfolio

TT: Electronic Parts Catalog (EPC) does not include notes requiring ordering the Protector Heater seals when replacing the air conditioning Evaporator Core (88511- #####) or Radiator Heater Unit SubAssembly (87107- #####

Source components: ELECTRICAL SYSTEM · EQUIPMENT.

T-TT-0721-23

NHTSA communication ID: 10234312

NHTSA source summary · Original PDF not reviewed by Recallfolio

TT: Electronic Parts Catalog (EPC) does not include notes requiring ordering the Protector Heater seals when replacing the air conditioning Evaporator Core (87511- #####) or Radiator Heater Unit Sub-Assembly (87107- #####).

Source components: ELECTRICAL SYSTEM.

T-TT-0720-23 Rev

NHTSA communication ID: 10234311

NHTSA source summary · Original PDF not reviewed by Recallfolio

TT: Some 2020-2023 Manual Transmission Tacoma vehicles may exhibit an abnormal clutch pedal creak/squeak sound during operation.

Source components: EQUIPMENT · POWER TRAIN.

TTT072023

NHTSA communication ID: 10235239

NHTSA source summary · Original PDF not reviewed by Recallfolio

TT: Some 2020-2023 Manual Transmission Tacoma vehicles may exhibit an abnormal clutch pedal creak/squeak sound during operation.

Source components: EQUIPMENT · POWER TRAIN.

T-SB-0115-22

NHTSA communication ID: 10230385

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: Some 2019 ? 2022 model year Avalon, 2018 ? 2023 model year Camry, 2017 ? 2022 model year Highlander, 2017 ? 2020 model year Sienna, and 2016 ? 2023 model year Tacoma vehicles equipped with a 2GR-FKS engine may exhibit a knocking noise from the vacuum pump at idle. Follow the Repair Procedure in this bulletin to address this condition

Source components: ENGINE AND ENGINE COOLING · FUEL SYSTEM, GASOLINE.

T-SB-0031-22 Obs

NHTSA communication ID: 10227903

NHTSA source summary · Original PDF not reviewed by Recallfolio

OBSOLETE NOTICE November 28, 2022: This bulletin is now obsolete. Please see T-SB-0105-22

Source components: COMMUNICATION.

T-SB-0032-22 Obs

NHTSA communication ID: 10227902

NHTSA source summary · Original PDF not reviewed by Recallfolio

OBSOLETE NOTICE November 28, 2022: This bulletin is now obsolete. Please see T-SB-0104-22.

Source components: COMMUNICATION.

T-SB-0105-22

NHTSA communication ID: 10227901

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle.

Source components: TRAILER HITCHES · WHEELS.

T-SB-0104-22

NHTSA communication ID: 10227900

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Toyota does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should test the auxiliary (12V) battery and recharge, if necessary, no more than 48 hours before delivery to the customer

Source components: EQUIPMENT.

T-SB-0124-20 Rev

NHTSA communication ID: 10227899

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: Some 2016 ? 2023 model year Tacoma vehicles equipped with an automatic transmission (6AT) may exhibit a vibration under deceleration (coasting or braking) typically between 30 ? 10 mph. This vibration is felt in the seat, floorboard, and/or steering wheel. Follow the Repair Procedure in this bulletin to address this condition

Source components: POWER TRAIN · STEERING · SUSPENSION.

T-SB-0036-22 Rev

NHTSA communication ID: 10227926

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately.

Source components: EQUIPMENT.

T-SB-0029-22 Rev

NHTSA communication ID: 10227925

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: 2023 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle?s glove box for customer reference

Source components: AIR BAGS · EQUIPMENT ADAPTIVE/MOBILITY.

T-SB-0004-22 Rev

NHTSA communication ID: 10227906

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: Some 2016 ? 2023 model year Tacoma vehicles may exhibit what customers describe as a 1 ? 3-second whistle noise from the HVAC system when the air conditioning system is ON. The whistle noise may occur as the compressor cycles on and off and is more prevalent with increased engine RPM during hot ambient temperatures. Follow the Repair Procedure in this bulletin to address this condition.

Source components: VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM.

T-SB-0032-22 Rev

NHTSA communication ID: 10224168

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Toyota does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should test the auxiliary (12V) battery and recharge, if necessary, no more than 48 hours before delivery to the customer.

Source components: EQUIPMENT.

T-SB-0075-22

NHTSA communication ID: 10224157

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: ?Careful inspection for paint chips/scratches and body dents/dings. ?Proper operation of electrical accessories (including interior light, clock, and radio reset). ?Interior cleanliness. ?Proper function of mechanical systems. Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. (See PDS Check Sheet item 8 of ?Final Inspection and Cleaning.?) This bulletin contains the PDS procedures that apply specifically to 2023 model year Tacoma vehicles. A universal PDS Check Sheet that contains PDS steps that apply to all 2023 model year Toyota vehicles has been developed. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet. In addition, if the vehicle is stored for over 30 days, be sure to follow Long-Term Vehicle Storage Guidelines.

Source components: ELECTRICAL SYSTEM · EQUIPMENT · STRUCTURE.

T-SB-0031-22 Rev

NHTSA communication ID: 10220209

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle

Source components: WHEELS.

T-SB-0036-22 Rev

NHTSA communication ID: 10220240

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately

Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.

T-SB-0029-22 Rev

NHTSA communication ID: 10220239

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: 2023 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle?s glove box for customer reference

Source components: EQUIPMENT.

T-SB-0032-22 Rev

NHTSA communication ID: 10217803

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Toyota does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should test the auxiliary (12V) battery and recharge, if necessary, no more than 48 hours before delivery to the customer

Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY · EQUIPMENT.

T-SB-0031-22 Rev

NHTSA communication ID: 10217802

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle.

Source components: WHEELS.

TTT069522

NHTSA communication ID: 10220154

NHTSA source summary · Original PDF not reviewed by Recallfolio

TT: To improve customer support of telematics connected services features, additional resources have been provided in the Service Lane - Knowledge Center.

Source components: COMMUNICATION:MANUFACTURER TELEMATICS.

T-SB-0036-22

NHTSA communication ID: 10211804

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately

Source components: EQUIPMENT.

T-SB-0032-22

NHTSA communication ID: 10211786

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Toyota does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should test the auxiliary (12V) battery and recharge, if necessary, no more than 48 hours before delivery to the customer.

Source components: ELECTRICAL SYSTEM:12V/24V/48V BATTERY.

T-SB-0029-22

NHTSA communication ID: 10210381

NHTSA source summary · Original PDF not reviewed by Recallfolio

TSB: 2023 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle?s glove box for customer reference.

Source components: AIR BAGS · EQUIPMENT ADAPTIVE/MOBILITY · UNKNOWN OR OTHER.