Subaru Tech Tips
NHTSA communication ID: 10161824
NHTSA source summary · Original PDF not reviewed by Recallfolio
Subaru Service and Technical Support Line Newletter.
Source components: EQUIPMENT.
Source record 10161824 at NHTSAThe manufacturer’s record · Page 2 of 2
2007 Subaru FORESTER
Manufacturer communications & TSBs.Page 2
Original record summaries, dates and identifiers for this model-year. Records 101–136 of 136, ordered newest first. Dated records on this page: Mar 19, 2008–May 21, 2019.
Back to 2007 Subaru FORESTER problems & recallsRead the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
14-22-16R
NHTSA communication ID: 10161813
NHTSA source summary · Original PDF not reviewed by Recallfolio
To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool.
Source components: EQUIPMENT.
Source record 10161813 at NHTSA04-13-09R
NHTSA communication ID: 10153183
NHTSA source summary · Original PDF not reviewed by Recallfolio
This post was revised in error. It has been corrected back and removed from the posting list. The message was corrected on 04-13-14R posting dated 11/14/2018.
Source components: STEERING · STEERING:ELECTRIC POWER ASSIST SYSTEM.
Source record 10153183 at NHTSA03-82-18
NHTSA communication ID: 10150949
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases where the operator keeps a foot on the clutch pedal for extended periods, an increased amount of heat is generated which can cause the grease inside the bearing to deteriorate. In a case of prolonged clutch pedal application, seizure of the bearing can occur with potential damage to other related components.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · POWER TRAIN.
Source record 10150949 at NHTSA03-82-18
NHTSA communication ID: 10150924
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases where the operator keeps a foot on the clutch pedal for extended periods, an increased amount of heat is generated which can cause the grease inside the bearing to deteriorate. In a case of prolonged clutch pedal application, seizure of the bearing can occur with potential damage to other related components.
Source components: EQUIPMENT ADAPTIVE/MOBILITY · POWER TRAIN.
Source record 10150924 at NHTSA02-172-18R
NHTSA communication ID: 10140479
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides details regarding a new oil filler tube o-ring developed to address engine oil seepage concerns. This seepage may accumulate along the bottom sealing surface of the rocker cover. The new o-ring utilizes material which has an increased resistance to engine heat.
Source components: ENGINE · EQUIPMENT.
Source record 10140479 at NHTSA02-172-18R
NHTSA communication ID: 10140424
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides details regarding a new oil filler tube o-ring developed to address engine oil seepage concerns. This seepage may accumulate along the bottom sealing surface of the rocker cover. The new o-ring utilizes material which has an increased resistance to engine heat.
Source components: ENGINE.
Source record 10140424 at NHTSA12-231-18
NHTSA communication ID: 10130277
NHTSA source summary · Original PDF not reviewed by Recallfolio
( 2017-2018MY Impreza - 5 Dr Only)
Source components: STRUCTURE:BODY.
Source record 10130277 at NHTSAWVU31R
NHTSA communication ID: 10131702
NHTSA source summary · Original PDF not reviewed by Recallfolio
2.5 Liter N/A engine only. REVISED. Subaru of America, Inc. has determined that vehicles affected by this Service Program require ECM reprogramming. A modification to the Engine Control Module software logic has been developed to improve the performance of the emission control system. This software change will not adversely affect fuel economy or performance. This software update is intended to improve vehicle emissions when the vehicle is operated in cold weather and the engine is turned off and restarted within short periods of time such as in several minute intervals. The A/F sensor contains a heating element, which is controlled by the ECM, and which assists the sensor in reaching an optimum temperature, resulting in better accuracy. When the vehicle is operated under the conditions described above, there could be a longer than desired delay in the ECM?s turning on the A/F sensor heating element, resulting in higher than desired emissions. This software enhancement will correct that condition.
Source components: ELECTRICAL SYSTEM:SOFTWARE · ENGINE AND ENGINE COOLING.
Source record 10131702 at NHTSAWVN24R
NHTSA communication ID: 10131700
NHTSA source summary · Original PDF not reviewed by Recallfolio
REVISED. CA PZEV SPEC MODELS ONLY. Subaru of America, Inc. (SOA) has determined that vehicles affected by this Service Program have two conditions that may adversely affect the performance of the catalytic converter. To correct these conditions, described below, affected vehicles require (1) ECM reprogramming and (2) permanent removal of the fuel tank one-way fuel valve.
Source components: ENGINE AND ENGINE COOLING · ENGINE AND ENGINE COOLING:EXHAUST SYSTEM.
Source record 10131700 at NHTSA02-164-16
NHTSA communication ID: 10111069
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Service Information bulletin announces a design change to the internal contact portion of the oil pressure switch to increase durability
Source components: ENGINE AND ENGINE COOLING.
Source record 10111069 at NHTSA01-168-09R
NHTSA communication ID: 10120997
NHTSA source summary · Original PDF not reviewed by Recallfolio
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site.
Source components: EQUIPMENT.
Source record 10120997 at NHTSA01-168-09R
NHTSA communication ID: 10131647
NHTSA source summary · Original PDF not reviewed by Recallfolio
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10131647 at NHTSA01-168-09R
NHTSA communication ID: 10140499
NHTSA source summary · Original PDF not reviewed by Recallfolio
Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. This bulletin identifies the equipment required to initialize (reset) the immobilizer code and cut the key blanks, for both immobilizer and non-immobilizer type keys. Subaru of America began using immobilizer systems in some 2005MY vehicles (please refer to Immobilizer Chart for more detailed information).
Source components: EQUIPMENT · EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10140499 at NHTSA04-13-09R
NHTSA communication ID: 10093117
NHTSA source summary · Original PDF not reviewed by Recallfolio
IF YOU ENCOUNTER A VEHICLE THAT HAS A GROANING TYPE NOISE COMING FROM THE POWER STEERING PUMP WHEN THE WHEEL IS TURNED TO THE FULL RIGHT OR LEFT POSITION WHEN THE VEHICLE IS PARKED, IT MAY BE CAUSED BY THE RELIEF VALVE VIBRATING WITHIN THE PUMP. IN LIEU OF REPLACING THE POWER STEERING PUMP, THE RELIEF VALVE IS NOW AVAILABLE AS A REPLACEMENT PART.
Source components: STEERING.
Source record 10093117 at NHTSA02-162-15R
NHTSA communication ID: 10093105
NHTSA source summary · Original PDF not reviewed by Recallfolio
"THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH COULD AFFECT OPERATION OR CAUSE IMPROPER ILLUMINATION OF THE OIL PRESSURE WARNING LAMP. A SMALL PILOT PORTION WAS ADDED TO THE THREADED AREA ON P.N. 25240KA051 AS SHOWN IN THE ILLUSTRATION BELOW. REVISED PRODUCTION CHANGE INFORMATION."
Source components: EQUIPMENT.
Source record 10093105 at NHTSA02-162-15
NHTSA communication ID: 10093067
NHTSA source summary · Original PDF not reviewed by Recallfolio
"THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH COULD AFFECT OPERATION OR CAUSE IMPROPER ILLUMINATION OF THE OIL PRESSURE WARNING LAMP. A SMALL PILOT PORTION WAS ADDED TO THE THREADED AREA ON P.N. 25240KA051 AS SHOWN IN THE ILLUSTRATION BELOW."
Source components: ENGINE.
Source record 10093067 at NHTSA04-13-09R
NHTSA communication ID: 10091965
NHTSA source summary · Original PDF not reviewed by Recallfolio
IF YOU ENCOUNTER A VEHICLE THAT HAS A GROANING TYPE NOISE COMING FROM THE POWER STEERING PUMP WHEN THE WHEEL IS TURNED TO THE FULL RIGHT OR LEFT POSITION WHEN THE VEHICLE IS PARKED, IT MAY BE CAUSED BY THE RELIEF VALVE VIBRATING WITHIN THE PUMP. IN LIEU OF REPLACING THE POWER STEERING PUMP, THE RELIEF VALVE IS NOW AVAILABLE AS A REPLACEMENT PART.
Source components: EQUIPMENT:RECREATIONAL VEHICLE/TRAILER:LPG SYSTEMS:TANK VALVE/GAUGE.
Source record 10091965 at NHTSA04-13-09R
NHTSA communication ID: 10140549
NHTSA source summary · Original PDF not reviewed by Recallfolio
If you encounter a vehicle that has a groaning type noise coming from the power steering pump when the wheel is turned to the full right or left position when the vehicle is parked, it may be caused by the relief valve vibrating within the pump. In lieu of replacing the power steering pump, the relief valve is now available as a replacement part.
Source components: EQUIPMENT · STEERING:HYDRAULIC POWER ASSIST:PUMP.
Source record 10140549 at NHTSA0116809R
NHTSA communication ID: 10232535
NHTSA source summary · Original PDF not reviewed by Recallfolio
Replacement Key and Immobilizer Info
Source components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER.
Source record 10232535 at NHTSA037012R-1
NHTSA communication ID: 10234829
NHTSA source summary · Original PDF not reviewed by Recallfolio
Repair Procedure for High-Pitched Sound from Extension Housing Area Using Latest Generation Production Parts
Source components: FUEL SYSTEM, OTHER:KINETIC:HOUSING/CASE.
Source record 10234829 at NHTSA03-70-12R
NHTSA communication ID: 10089957
NHTSA source summary · Original PDF not reviewed by Recallfolio
REPAIR PROCEDURE FOR HIGH-PITCHED SOUND FROM EXTENSION HOUSING AREA USING LATEST GENERATION PRODUCTION PARTS - THIS BULLETIN PROVIDES PRODUCTION CHANGE, REPAIR PROCEDURE AND PARTS INFORMATION TO ADDRESS A CUSTOMER CONCERN OF A HIGH-PITCHED SOUND COMING FROM THE TRANSMISSION EXTENSION HOUSING AREA.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10089957 at NHTSA15-167-13R
NHTSA communication ID: 10092717
NHTSA source summary · Original PDF not reviewed by Recallfolio
SHOULD YOU RECEIVE A CUSTOMER CONCERN OF A LOOSE WINDSHIELD MOUNTED AUTO-DIMMING COMPASS MIRROR WITH HOMELINK (WITH OR WITHOUT HOMELINK ON BRZ MODELS), THE MOUNTING ADAPTER PLATE SHOULD BE CHECKED FOR PROPER TIGHTNESS. THE APPLICABLE VEHICLES LISTED ABOVE UTILIZE A MIRROR MOUNT ADAPTOR TO SECURE THE MIRROR TO THE WINDSHIELD. DUE TO IMPROPER INSTALLATION, IN SOME CASES, THE MIRROR MAY LOOSEN OVER TIME AND BEGIN TO RATTLE. A NEW SERVICE KIT HAS BEEN DEVELOPED TO IMPROVE RETENTION OF THE MIRROR TO THE WINDSHIELD MOUNT. THE COUNTERSINK IN THE CAM PLATE SHOWN IN THE PHOTO BELOW HAS BEEN ELIMINATED TO MAKE INSTALLATION EASIER. FORESTER, IMPREZA, WRX AND STI VEHICLES PRODUCED DURING THE 2008 CALENDAR YEAR AND LATER 2013MY BRZ (WITH OR WITHOUT HOMELINK)
Source components: EQUIPMENT.
Source record 10092717 at NHTSA037012R
NHTSA communication ID: 10234828
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Bulletin provides production change, repair procedure and parts information to address a customer concern of a high-pitched sound coming from the transmission extension housing area.
Source components: POWER TRAIN.
Source record 10234828 at NHTSA0116809R
NHTSA communication ID: 10232879
NHTSA source summary · Original PDF not reviewed by Recallfolio
Replacement Key and Immobilizer info
Source components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER.
Source record 10232879 at NHTSA037012R
NHTSA communication ID: 10235830
NHTSA source summary · Original PDF not reviewed by Recallfolio
Repair Procedure for High-Pitched Sound
Source components: ENGINE.
Source record 10235830 at NHTSA037012
NHTSA communication ID: 10234260
NHTSA source summary · Original PDF not reviewed by Recallfolio
Repair Procedure for High-Pitched Sound from Extension Housing Area Using Latest Generation Production Parts
Source components: ELECTRICAL SYSTEM.
Source record 10234260 at NHTSA03-70-12
NHTSA communication ID: 10093977
NHTSA source summary · Original PDF not reviewed by Recallfolio
REPAIR PROCEDURE FOR HIGH-PITCHED SOUND FROM EXTENSION HOUSING AREA USING LATEST GENERATION PRODUCTION PARTS
Source components: EQUIPMENT.
Source record 10093977 at NHTSA166399R
NHTSA communication ID: 10234261
NHTSA source summary · Original PDF not reviewed by Recallfolio
Remanufactured Automatic Transaxle Program
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE.
Source record 10234261 at NHTSA036812R
NHTSA communication ID: 10234258
NHTSA source summary · Original PDF not reviewed by Recallfolio
5MT Transfer Driven Gear Bearings
Source components: POWER TRAIN:DRIVELINE:CENTER SUPPORT BEARING.
Source record 10234258 at NHTSA03-68-12R
NHTSA communication ID: 10093967
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS BULLETIN REVIEWS A CHANGE TO THE PART NUMBERS USED FOR THE TRANSFER DRIVEN GEAR BEARINGS. THESE REVISED BEARINGS ARE TO BE USED TO ENHANCE DURABILITY.
Source components: POWER TRAIN:DRIVELINE:CENTER SUPPORT BEARING.
Source record 10093967 at NHTSASPB-WVU-31
NHTSA communication ID: 10038970
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUBARU SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. ECM REPROGRAMMING PROCEDURE. 2006-2010 LEGACY/OUTBACK/FORESTER/IMPREZA. *RM UPDATED 9/26/11. *PE
Source components: ENGINE AND ENGINE COOLING:ENGINE.
Source record 10038970 at NHTSASB-WVN-24
NHTSA communication ID: 10032511
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUBARU SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. ENGINE CONTROL MODULE (ECM) REPROGRAMMING AND FUEL TANK ONE WAY FUEL VALVE REMOVAL. AFFECTED VEHICLES HAVE TWO CONDITIONS THAT MAY ADVERSELY AFFECT THE PERFORMANCE OF THE CATALYTIC CONVERTER. TO CORRECT THESE CONDITIONS, AFFECTED VEHICLES REQUIRE ECM REPROGRAMMING AND PERMANENT REMOVAL OF THE FUEL TANK ONE WAY FUEL VALVE. CSC LETTER WAS RECEIVED. *PE UPDATED 6/30/11. *PE
Source components: ENGINE AND ENGINE COOLING:ENGINE · FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY.
Source record 10032511 at NHTSASB-05-50-10R
NHTSA communication ID: 10037968
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUBARU: THERE IS A STEERING WHEEL VIBRATION AT HIGHWAY SPEEDS DUE TO AN IMPORPER WHEEL BALANCE. *RM
Source components: TIRES.
Source record 10037968 at NHTSASB-WVL-22
NHTSA communication ID: 10032510
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUBARU SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. FUEL TANK ONE WAY FUEL VALVE. CERTAIN MODELS REQUIRE PERMANENT REMOVAL OF THE ONE WAY FUEL VALVE LOCATED IN THE FUEL TANK. THE ONE WAY FUEL VALVE IS LOCATED AT THE BASE OF A SMALL SUB CHAMBER CONTAINED IN THE FUEL TANK. CSC LETTER WAS RECEIVED. *PE
Source components: FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY.
Source record 10032510 at NHTSA02-104-08
NHTSA communication ID: 10024965
NHTSA source summary · Original PDF not reviewed by Recallfolio
INTAKE MANIFOLD MODIFICATION. *NJ
Source components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE.
Source record 10024965 at NHTSA