Subaru Tech Tips
NHTSA communication ID: 10161824
NHTSA source summary · Original PDF not reviewed by Recallfolio
Subaru Service and Technical Support Line Newletter.
Source components: EQUIPMENT.
Source record 10161824 at NHTSAThe manufacturer’s record · Page 2 of 2
2005 Subaru FORESTER
Manufacturer communications & TSBs.Page 2
Original record summaries, dates and identifiers for this model-year. Records 101–140 of 140, ordered newest first. Dated records on this page: Aug 1, 2004–May 21, 2019.
Back to 2005 Subaru FORESTER problems & recallsRead the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
14-22-16R
NHTSA communication ID: 10161813
NHTSA source summary · Original PDF not reviewed by Recallfolio
To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool.
Source components: EQUIPMENT.
Source record 10161813 at NHTSA04-13-09R
NHTSA communication ID: 10153183
NHTSA source summary · Original PDF not reviewed by Recallfolio
This post was revised in error. It has been corrected back and removed from the posting list. The message was corrected on 04-13-14R posting dated 11/14/2018.
Source components: STEERING · STEERING:ELECTRIC POWER ASSIST SYSTEM.
Source record 10153183 at NHTSA03-82-18
NHTSA communication ID: 10150949
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases where the operator keeps a foot on the clutch pedal for extended periods, an increased amount of heat is generated which can cause the grease inside the bearing to deteriorate. In a case of prolonged clutch pedal application, seizure of the bearing can occur with potential damage to other related components.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · POWER TRAIN.
Source record 10150949 at NHTSA03-82-18
NHTSA communication ID: 10150924
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. In cases where the operator keeps a foot on the clutch pedal for extended periods, an increased amount of heat is generated which can cause the grease inside the bearing to deteriorate. In a case of prolonged clutch pedal application, seizure of the bearing can occur with potential damage to other related components.
Source components: EQUIPMENT ADAPTIVE/MOBILITY · POWER TRAIN.
Source record 10150924 at NHTSA02-172-18R
NHTSA communication ID: 10140479
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides details regarding a new oil filler tube o-ring developed to address engine oil seepage concerns. This seepage may accumulate along the bottom sealing surface of the rocker cover. The new o-ring utilizes material which has an increased resistance to engine heat.
Source components: ENGINE · EQUIPMENT.
Source record 10140479 at NHTSA02-172-18R
NHTSA communication ID: 10140424
NHTSA source summary · Original PDF not reviewed by Recallfolio
This bulletin provides details regarding a new oil filler tube o-ring developed to address engine oil seepage concerns. This seepage may accumulate along the bottom sealing surface of the rocker cover. The new o-ring utilizes material which has an increased resistance to engine heat.
Source components: ENGINE.
Source record 10140424 at NHTSA12-231-18
NHTSA communication ID: 10130277
NHTSA source summary · Original PDF not reviewed by Recallfolio
( 2017-2018MY Impreza - 5 Dr Only)
Source components: STRUCTURE:BODY.
Source record 10130277 at NHTSA02-164-16
NHTSA communication ID: 10111069
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Service Information bulletin announces a design change to the internal contact portion of the oil pressure switch to increase durability
Source components: ENGINE AND ENGINE COOLING.
Source record 10111069 at NHTSA01-168-09R
NHTSA communication ID: 10120997
NHTSA source summary · Original PDF not reviewed by Recallfolio
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site.
Source components: EQUIPMENT.
Source record 10120997 at NHTSA01-168-09R
NHTSA communication ID: 10131647
NHTSA source summary · Original PDF not reviewed by Recallfolio
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10131647 at NHTSA01-168-09R
NHTSA communication ID: 10140499
NHTSA source summary · Original PDF not reviewed by Recallfolio
Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. This bulletin identifies the equipment required to initialize (reset) the immobilizer code and cut the key blanks, for both immobilizer and non-immobilizer type keys. Subaru of America began using immobilizer systems in some 2005MY vehicles (please refer to Immobilizer Chart for more detailed information).
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY.
Source record 10140499 at NHTSA14411AA532R1
NHTSA communication ID: 10233107
NHTSA source summary · Original PDF not reviewed by Recallfolio
Launch of Remanufactured Turbochargers
Source components: ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER.
Source record 10233107 at NHTSA14411AA532R1
NHTSA communication ID: 10076009
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOA is pleased to announce the launch of a new remanufactured turbocharger program. Supplies are now available at all RDCs. When installing a remanufactured turbocharger follow the procedure outlined in Service Bulletin 02-106-08R and consult the service manual for vehicle specific instructions.
Source components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL.
Source record 10076009 at NHTSA04-13-09R
NHTSA communication ID: 10093117
NHTSA source summary · Original PDF not reviewed by Recallfolio
IF YOU ENCOUNTER A VEHICLE THAT HAS A GROANING TYPE NOISE COMING FROM THE POWER STEERING PUMP WHEN THE WHEEL IS TURNED TO THE FULL RIGHT OR LEFT POSITION WHEN THE VEHICLE IS PARKED, IT MAY BE CAUSED BY THE RELIEF VALVE VIBRATING WITHIN THE PUMP. IN LIEU OF REPLACING THE POWER STEERING PUMP, THE RELIEF VALVE IS NOW AVAILABLE AS A REPLACEMENT PART.
Source components: STEERING.
Source record 10093117 at NHTSA02-162-15R
NHTSA communication ID: 10093105
NHTSA source summary · Original PDF not reviewed by Recallfolio
"THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH COULD AFFECT OPERATION OR CAUSE IMPROPER ILLUMINATION OF THE OIL PRESSURE WARNING LAMP. A SMALL PILOT PORTION WAS ADDED TO THE THREADED AREA ON P.N. 25240KA051 AS SHOWN IN THE ILLUSTRATION BELOW. REVISED PRODUCTION CHANGE INFORMATION."
Source components: EQUIPMENT.
Source record 10093105 at NHTSA02-162-15
NHTSA communication ID: 10093067
NHTSA source summary · Original PDF not reviewed by Recallfolio
"THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH COULD AFFECT OPERATION OR CAUSE IMPROPER ILLUMINATION OF THE OIL PRESSURE WARNING LAMP. A SMALL PILOT PORTION WAS ADDED TO THE THREADED AREA ON P.N. 25240KA051 AS SHOWN IN THE ILLUSTRATION BELOW."
Source components: ENGINE.
Source record 10093067 at NHTSA04-13-09R
NHTSA communication ID: 10091965
NHTSA source summary · Original PDF not reviewed by Recallfolio
IF YOU ENCOUNTER A VEHICLE THAT HAS A GROANING TYPE NOISE COMING FROM THE POWER STEERING PUMP WHEN THE WHEEL IS TURNED TO THE FULL RIGHT OR LEFT POSITION WHEN THE VEHICLE IS PARKED, IT MAY BE CAUSED BY THE RELIEF VALVE VIBRATING WITHIN THE PUMP. IN LIEU OF REPLACING THE POWER STEERING PUMP, THE RELIEF VALVE IS NOW AVAILABLE AS A REPLACEMENT PART.
Source components: EQUIPMENT:RECREATIONAL VEHICLE/TRAILER:LPG SYSTEMS:TANK VALVE/GAUGE.
Source record 10091965 at NHTSA04-13-09R
NHTSA communication ID: 10140549
NHTSA source summary · Original PDF not reviewed by Recallfolio
If you encounter a vehicle that has a groaning type noise coming from the power steering pump when the wheel is turned to the full right or left position when the vehicle is parked, it may be caused by the relief valve vibrating within the pump. In lieu of replacing the power steering pump, the relief valve is now available as a replacement part.
Source components: EQUIPMENT · STEERING:HYDRAULIC POWER ASSIST:PUMP.
Source record 10140549 at NHTSA0116809R
NHTSA communication ID: 10232535
NHTSA source summary · Original PDF not reviewed by Recallfolio
Replacement Key and Immobilizer Info
Source components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER.
Source record 10232535 at NHTSA037012R-1
NHTSA communication ID: 10234829
NHTSA source summary · Original PDF not reviewed by Recallfolio
Repair Procedure for High-Pitched Sound from Extension Housing Area Using Latest Generation Production Parts
Source components: FUEL SYSTEM, OTHER:KINETIC:HOUSING/CASE.
Source record 10234829 at NHTSA03-70-12R
NHTSA communication ID: 10089957
NHTSA source summary · Original PDF not reviewed by Recallfolio
REPAIR PROCEDURE FOR HIGH-PITCHED SOUND FROM EXTENSION HOUSING AREA USING LATEST GENERATION PRODUCTION PARTS - THIS BULLETIN PROVIDES PRODUCTION CHANGE, REPAIR PROCEDURE AND PARTS INFORMATION TO ADDRESS A CUSTOMER CONCERN OF A HIGH-PITCHED SOUND COMING FROM THE TRANSMISSION EXTENSION HOUSING AREA.
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION.
Source record 10089957 at NHTSA037012R
NHTSA communication ID: 10234828
NHTSA source summary · Original PDF not reviewed by Recallfolio
This Bulletin provides production change, repair procedure and parts information to address a customer concern of a high-pitched sound coming from the transmission extension housing area.
Source components: POWER TRAIN.
Source record 10234828 at NHTSA0116809R
NHTSA communication ID: 10232879
NHTSA source summary · Original PDF not reviewed by Recallfolio
Replacement Key and Immobilizer info
Source components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER.
Source record 10232879 at NHTSA037012R
NHTSA communication ID: 10235830
NHTSA source summary · Original PDF not reviewed by Recallfolio
Repair Procedure for High-Pitched Sound
Source components: ENGINE.
Source record 10235830 at NHTSA037012
NHTSA communication ID: 10234260
NHTSA source summary · Original PDF not reviewed by Recallfolio
Repair Procedure for High-Pitched Sound from Extension Housing Area Using Latest Generation Production Parts
Source components: ELECTRICAL SYSTEM.
Source record 10234260 at NHTSA03-70-12
NHTSA communication ID: 10093977
NHTSA source summary · Original PDF not reviewed by Recallfolio
REPAIR PROCEDURE FOR HIGH-PITCHED SOUND FROM EXTENSION HOUSING AREA USING LATEST GENERATION PRODUCTION PARTS
Source components: EQUIPMENT.
Source record 10093977 at NHTSA166399R
NHTSA communication ID: 10234261
NHTSA source summary · Original PDF not reviewed by Recallfolio
Remanufactured Automatic Transaxle Program
Source components: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE.
Source record 10234261 at NHTSA036812R
NHTSA communication ID: 10234258
NHTSA source summary · Original PDF not reviewed by Recallfolio
5MT Transfer Driven Gear Bearings
Source components: POWER TRAIN:DRIVELINE:CENTER SUPPORT BEARING.
Source record 10234258 at NHTSA03-68-12R
NHTSA communication ID: 10093967
NHTSA source summary · Original PDF not reviewed by Recallfolio
THIS BULLETIN REVIEWS A CHANGE TO THE PART NUMBERS USED FOR THE TRANSFER DRIVEN GEAR BEARINGS. THESE REVISED BEARINGS ARE TO BE USED TO ENHANCE DURABILITY.
Source components: POWER TRAIN:DRIVELINE:CENTER SUPPORT BEARING.
Source record 10093967 at NHTSASB-05-50-10R
NHTSA communication ID: 10037968
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUBARU: THERE IS A STEERING WHEEL VIBRATION AT HIGHWAY SPEEDS DUE TO AN IMPORPER WHEEL BALANCE. *RM
Source components: TIRES.
Source record 10037968 at NHTSASB-WVL-22
NHTSA communication ID: 10032510
NHTSA source summary · Original PDF not reviewed by Recallfolio
SUBARU SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. FUEL TANK ONE WAY FUEL VALVE. CERTAIN MODELS REQUIRE PERMANENT REMOVAL OF THE ONE WAY FUEL VALVE LOCATED IN THE FUEL TANK. THE ONE WAY FUEL VALVE IS LOCATED AT THE BASE OF A SMALL SUB CHAMBER CONTAINED IN THE FUEL TANK. CSC LETTER WAS RECEIVED. *PE
Source components: FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY.
Source record 10032510 at NHTSA166806
NHTSA communication ID: 10020531
NHTSA source summary · Original PDF not reviewed by Recallfolio
VEHICLES EQUIPPED WITH 4 EAT DIAGNOSTIC PROCEDURES FOR P0851/P0852. *KB
Source components: ENGINE AND ENGINE COOLING:ENGINE.
Source record 10020531 at NHTSA02
NHTSA communication ID: 10019343
NHTSA source summary · Original PDF not reviewed by Recallfolio
RUBBING MARK ON TIMING BELT. SUBARU. *TT
Source components: ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:BELTS AND ASSOCIATED PULLEYS.
Source record 10019343 at NHTSA029605
NHTSA communication ID: 10016869
NHTSA source summary · Original PDF not reviewed by Recallfolio
2.5L REMANUFACTURED SOHC SHORT BLOCK RELEASE. *TT
Source components: ENGINE AND ENGINE COOLING:ENGINE.
Source record 10016869 at NHTSA117605
NHTSA communication ID: 10016432
NHTSA source summary · Original PDF not reviewed by Recallfolio
MODIFICATION TO FUEL TANK PRESSURE SENSOR. *TT
Source components: FUEL SYSTEM, OTHER.
Source record 10016432 at NHTSA128705
NHTSA communication ID: 10016129
NHTSA source summary · Original PDF not reviewed by Recallfolio
FLOOR MAT CARPET HOOK SEPARATED FROM ITS RETAINING RING OR WILL NOT STAY SEATED. *TT
Source components: EQUIPMENT.
Source record 10016129 at NHTSA128405
NHTSA communication ID: 10015202
NHTSA source summary · Original PDF not reviewed by Recallfolio
THE DAMPING STRUCTURE FOR THE REAR GATE STAY HAS BEEN CHANGED FROM A SINGLE TO A DUAL TYPE DAMPER STYLE.
Source components: STRUCTURE:BODY:HATCHBACK/LIFTGATE:SUPPORT DEVICE/STRUT.
Source record 10015202 at NHTSA16
NHTSA communication ID: 10015746
NHTSA source summary · Original PDF not reviewed by Recallfolio
INSPECTION AND CORRECTION METHODS OF CONNECTOR T4/B11 FOR 4EAT. SUBARU TECHTIPS. *TT
Source components: ELECTRICAL SYSTEM:WIRING.
Source record 10015746 at NHTSA15
NHTSA communication ID: 10013584
NHTSA source summary · Original PDF not reviewed by Recallfolio
2005MY KEYS AND REMOTE TRANSMITTER NEW VEHICLE CHECK-IN PROCEDURE. SUBARU TECHTIPS. *TT
Source components: EQUIPMENT:ELECTRICAL.
Source record 10013584 at NHTSA