The manufacturer’s record · Page 1 of 1
Original record summaries, dates and identifiers for this model-year. Records 1–30 of 30, ordered newest first. Dated records on this page: Feb 23, 2024–May 1, 2026.
Back to 2024 Nissan ROGUE problems & recallsThis archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
NHTSA communication ID: 11033026
NHTSA source summary · Original PDF not reviewed by Recallfolio
FUEL FILLER TUBE LOWER SEAL IS LEAKING AND DTC P0456 IS STORED IN THE ECM This bulletin is no longer active. Please discard previous versions of NTB26-006.
Source components: FUEL/PROPULSION SYSTEM.
Source record 11033026 at NHTSANHTSA communication ID: 11031721
NHTSA source summary · Original PDF not reviewed by Recallfolio
MIL ON WITH DTC P0181 STORED IN THE ECM IF YOU CONFIRM The customer states the MIL is ON but the vehicle does not have any drivability concerns or reduced power message in the combination meter, AND DTC P0181 for “Fuel Tank Temperature” is stored in either “Past” or “Current” in the ECM. ACTION Follow the SERVICE PROCEDURE in this bulletin to: 1. Replace the fuel temperature sensor. 2. Erase all the DTCs.
Source components: ENGINE.
Source record 11031721 at NHTSANHTSA communication ID: 11031705
NHTSA source summary · Original PDF not reviewed by Recallfolio
CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).
Source components: STRUCTURE:BODY.
Source record 11031705 at NHTSANHTSA communication ID: 11031704
NHTSA source summary · Original PDF not reviewed by Recallfolio
CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).
Source components: STRUCTURE:BODY.
Source record 11031704 at NHTSANHTSA communication ID: 11028683
NHTSA source summary · Original PDF not reviewed by Recallfolio
FUEL FILLER TUBE LOWER SEAL IS LEAKING AND DTC P0456 IS STORED IN THE ECM IF YOU CONFIRM The vehicle has a visible leak with a smoke machine test coming from the fuel filler tube lower seal, AND DTC P0456 is stored as “Active”, “Past”, or “Pending” in the ECM. ACTION 1. Remove the supplied funnel from the rear of the vehicle or trunk. 2. Insert the funnel completely in the fuel filler tube and remove completely five (5) times. 3. Re-check the fuel filler tube lower seal with a smoke machine to determine visually if any leak is present. 4. If the fuel filler lower seal continues to leak, replace the fuel filler tube. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.
Source components: FUEL/PROPULSION SYSTEM.
Source record 11028683 at NHTSANHTSA communication ID: 11028691
NHTSA source summary · Original PDF not reviewed by Recallfolio
VENT CONTROL VALVE IN ACTIVE TEST INOPERATIVE IN CONSULT 4 SERVICE INFORMATION An issue in CONSULT 4 has been identified in “EVAP system close” in Work support. · After selecting the "EVAP system close" in Work support, the “VENT CONTROL/V” in Active test becomes non-functional temporarily. · When selecting “EVAP system close” operation in Work support, wait 10 minutes before starting “VENT CONTROL/V” Active test or cycle the IGN switch ON/OFF for “VENT CONTROL/V” Active test to be operational. HINT: This bulletin applies to model years that use CONSULT 4 only.
Source components: ENGINE.
Source record 11028691 at NHTSANHTSA communication ID: 11028690
NHTSA source summary · Original PDF not reviewed by Recallfolio
MIL ON WITH DTCS P05D8 AND P05D9 STORED IN THE ECM IF YOU CONFIRM The MIL is ON with DTCs P05D8 for “PCV Regulator Valve Control Circuit/Open” and P05D9 for “PCV Regulator Valve Control Circuit Low” stored in the ECM, AND The wiring harness, for wiring harness connector F130, is severed at the Crank Case Ventilation Valve under the Engine Cover. ACTION Follow the SERVICE PROCEDURE starting on page 3 to repair the wiring harness. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.
Source components: ENGINE.
Source record 11028690 at NHTSANHTSA communication ID: 11024395
NHTSA source summary · Original PDF not reviewed by Recallfolio
STEERING WHEEL SWITCH BUTTONS INOPERATIVE, STICKING, OR NOT CLICKING WHEN PRESSED IF YOU CONFIRM The customer states that any of the steering wheel switch buttons are inoperative, sticking, or not clicking when pressed. ACTION Follow the SERVICE PROCEDURE to: 1. Remove the steering wheel assembly. 2. Replace the switch assembly on the steering wheel assembly. HINT: The switch assembly includes switches for both sides of the steering wheel. 3. Reinstall the steering wheel assembly. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Campaign / software reference: EL25-001A
Source components: ELECTRICAL SYSTEM.
Source record 11024395 at NHTSANHTSA communication ID: 11024391
NHTSA source summary · Original PDF not reviewed by Recallfolio
ACTION Date: October 2, 2025 To: FOMs, DOMs, RAMs, & RGMs Subject: LAUNCH PD172 PMA55 Multi Model Monroney Bumper Label – QA – Dealer Announcement and Procedure ACTION: FOMs & DOMs are asked to ensure that dealers are aware of this new campaign information. Dealer Announcement: To ensure continued customer satisfaction and confidence, Nissan is conducting a quality action on certain specific model year 2025 ARIYA, 2024-2025 Pathfinder, 2024-2026 Rogue, 2024-2025 Murano and 2025-2026 Kicks vehicles, as identified in Service Comm and DBS National Service History. This action updates the Monroney labels to reflect corrected bumper labeling requirements for California and Hawaii. Dealers will replace original Monroney labels with corrected Monroney labels. Nissan will send VIN-specific corrected labels to address affected vehicles in dealer inventory. New labels will begin shipping via Federal Express Wednesday, October 1, 2025. Dealers will replace original Monroney labels with corrected Monroney labels. Affected vehicles are subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. What Dealers Should Do: PLEASE FOLLOW THE ATTACHED INSTRUCTIONS: 1.Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History – Open Campaigns I.D. PD172 & PMA55 •New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). Refer to NPSB 15-460 for additional information •Some vehicles may still be in transit. Please continue to check newly arriving inventory for applicability. 2.Please do not drive, loan, sell or trade the specific vehicles in dealer inventory subject to this quality action. 3.Use the attached procedure to remedy any vehicles affected by this quality action prior to sale. 4.If you have exchanged or traded one of the affected vehicles to another Nissan dealer, please forward the corrected Monroney label to the current dealer upon receipt so it can be attached to the vehicle. •If a vehicle has been retailed, dispose of the corrected Monroney label using the same procedure as for destroying the original Monroney label. 5.The service department should submit the applicable warranty claim for the action performed to close the campaign in Service Comm and release the vehicle.
Campaign / software reference: PD172, PMA55
Source components: STRUCTURE:BODY.
Source record 11024391 at NHTSANHTSA communication ID: 11014075
NHTSA source summary · Original PDF not reviewed by Recallfolio
MIL ON WITH DTC P0196 STORED IN THE ECM IF YOU CONFIRM The MIL is ON with DTC P0196 for “EOT SENSOR” stored in the ECM. HINT: DTC P0012 for “INTAKE VALVE TIMING CONTROL B1” may be stored along with P0196 for “EOT SENSOR”. ACTION Follow the SERVICE PROCEDURE in this bulletin to diagnose DTC P0196 for “EOT SENSOR”. Disregard P0012 if stored along with P0196. Do not follow the service information in the ESM when diagnosing P0196. The ESM information will be updated at a later date.
Source components: ELECTRICAL SYSTEM · ENGINE.
Source record 11014075 at NHTSANHTSA communication ID: 11013279
NHTSA source summary · Original PDF not reviewed by Recallfolio
CHARGE AIR COOLER SYSTEMS SERVICE INFORMATION SERVICE INFORMATION If a body shop or dealer performs a repair affecting the charge air cooler (Figure 1), please be aware of the following information regarding the charge air cooler coolant refill procedure. IMPORTANT: If the charge air cooler coolant reservoir (Figure 2 on page 2) is not filled properly per details in this bulletin, spark plug and/or engine damage may occur. Figure 1
Source components: ENGINE.
Source record 11013279 at NHTSANHTSA communication ID: 11013266
NHTSA source summary · Original PDF not reviewed by Recallfolio
ENGINE COOLANT SERVICE PROCEDURE SERVICE INFORMATION When draining and refilling the vehicle’s coolant for any reason, refer to the updated Electronic Service Manual (ESM) service procedure starting on page 2 of this bulletin to ensure that all air pockets have been completely purged. When refilling the cooling system, use Genuine Nissan BLUE LONG LIFE ANTIFREEZE or its equivalent, mixed with water that is distilled or demineralized. This amended procedure will be added to the ESM in a future update to the following ESM section: ENGINE > ENGINE COOLING SYSTEM > KR15DDT > PERIODIC MAINTENANCE > ENGINE COOLANT > Refilling IMPORTANT: The following information under step 5 on page 3 will be added to the ESM. If not using CONSULT, turn on cabin heater switch. Open the ENGINE COOLANT BYPASS VALVE by using CONSULT WORK SUPPORT function. o Refer to : ENGINE - ENGINE CONTROL SYSTEM - KR15DDT - SYSTEM DESCRIPTION - DIAGNOSIS SYSTEM (ECM) - DIAGNOSIS DESCRIPTION - CONSULT Function) Do not use additives, such as water leak preventive, since they may cause cooling waterway blockages.
Source components: ENGINE.
Source record 11013266 at NHTSANHTSA communication ID: 11013276
NHTSA source summary · Original PDF not reviewed by Recallfolio
CRUISE CONTROL/PROPILOT STOPS WORKING IF YOU CONFIRM The customer states that while driving on an unobstructed road, and on a clear day without any rain, snow, or direct sunlight, the Cruise Control/ProPilot stopped working, AND The Automatic Emergency Braking/Forward Emergency Braking light (AEB/FEB) flashed while the “Forward Driving Aids Disabled” message was displayed in the combination meter, AND DTC C2582-97 for “Distance sensor” is stored as PAST. ACTION Follow the SERVICE PROCEDURE in this bulletin to: 1. Confirm the current LASER/RADAR part number. 2. Reprogram the LASER/RADAR, if applicable. 3. Erase the DTCs. 4. Perform Distance Sensor Alignment. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.
Source components: FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL · VEHICLE SPEED CONTROL.
Source record 11013276 at NHTSANHTSA communication ID: 11009068
NHTSA source summary · Original PDF not reviewed by Recallfolio
DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. IF YOU CONFIRM DTC B00A0-00 (OCCUPANT DETECTION SENSOR UNIT) is stored, AND OCS zero point reset cannot be performed, (continued on the next page)
Source components: AIR BAGS.
Source record 11009068 at NHTSANHTSA communication ID: 11006979
NHTSA source summary · Original PDF not reviewed by Recallfolio
CHARGE AIR COOLER COOLANT SYSTEM SERVICE INFORMATION APPLIED VEHICLES: 2021-2024 Rogue (T33) APPLIED ENGINES: KR15DDT only AMENDMENT HISTORY PUBLISHED DATE REFERENCE DESCRIPTION July 10, 2024 NTB24-035 Original bulletin published August 28, 2024 NTB24-035A Bulletin no longer active This bulletin is no longer active. Please discard previous versions of NTB24-035.
Source components: ENGINE.
Source record 11006979 at NHTSANHTSA communication ID: 11006973
NHTSA source summary · Original PDF not reviewed by Recallfolio
DTC B2E01-96 (INTERNAL BATTERY) STORED AS CURRENT IN IVC This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. SERVICE INFORMATION The APPLIED VEHICLES that come equipped with a factory installed SOS switch, located near the overhead map lamp, also come equipped with a wireless communication device called a Telematics Communication Unit (TCU). With an active NissanConnect® Services subscription, the TCU communicates with the Nissan Data Center to provide various security and convenience services. CONSULT has been updated to allow DTC B2E01-96 for “Internal battery” to be cleared in the TCU. If DTC B2E01-96 is Current/Active in the TCU, and no additional Current/Active DTCs are present in the TCU, perform the SERVICE PROCEDURE starting on page 2.
Source components: ELECTRICAL SYSTEM.
Source record 11006973 at NHTSANHTSA communication ID: 11006972
NHTSA source summary · Original PDF not reviewed by Recallfolio
DTCS B2E4B-06, B2E60-06, B2E61-06 DISPLAYED AS CRNT IN THE TCU This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. IF YOU CONFIRM The customer experiences an issue with the NissanConnect® Service remote commands, AND Any of the following DTCs are displayed as CRNT in the Telematics Control Unit (TCU): B2E4B-06 B2E60-06 B2E61-06 HINT: These DTCs are caused by an issue with a cloud-server that is related to the TCU. ACTION 1. Do NOT replace the TCU. Replacing the TCU will not resolve the concern. 2. Send an email to NTB21-037@Nissan-Usa.com. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.
Source components: ELECTRICAL SYSTEM.
Source record 11006972 at NHTSANHTSA communication ID: 11006465
NHTSA source summary · Original PDF not reviewed by Recallfolio
SERVICE INFORMATION FOR AEB WARNING WITHOUT DTC STORED SERVICE INFORMATION If the "Automatic Emergency Braking (AEB) system OFF warning light" is either ON or flashes and no DTCs are stored, inspect the Lower Front Facia for impact damage and/or the Front Radar bracket for a damage/bent condition. HINT: For the warning light to activate, the vehicle may require a short drive. Refer to Figure 1 on page 3 for an example of a damage/bent condition. o Front Radar brackets that have been damaged by a collision are not covered under warranty. HINT: The “AEB system Malfunction See Owner’s Manual Warning” may or may not be displayed in the vehicle information display. For Necessary Repair or Replacement of Affected Components Refer to the ESM: CRUISE CONTROL & DRIVER ASSISTANCE - DRIVER ASSISTANCE SYSTEM - DRIVER ASSISTANCE SYSTEM - REMOVAL AND INSTALLATION - DISTANCE SENSOR Perform Distance Sensor Alignment Refer to ESM: CRUISE CONTROL & DRIVER ASSISTANCE > DRIVER ASSISTANCE SYSTEM > DRIVER ASSISTANCE SYSTEM > BASIC INSPECTION > ADDITIONAL SERVICE WHEN REPLACING DISTANCE SENSOR
Source components: ELECTRICAL SYSTEM · FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING.
Source record 11006465 at NHTSANHTSA communication ID: 11007003
NHTSA source summary · Original PDF not reviewed by Recallfolio
CHARGE AIR COOLER COOLANT SYSTEM SERVICE INFORMATION APPLIED VEHICLES: 2021-2024 Rogue (T33) APPLIED ENGINES: KR15DDT only SERVICE INFORMATION When working on the charge air cooler coolant system, refer to the information in this bulletin along with the ESM. The engine coolant system and the sub radiator (charge air cooler) coolant system are two (2) completely separate systems. When refilling the sub radiator (charge air cooler) coolant system after a repair, ensure to use the correct refill procedure. o Refer to the ESM: ENGINE > ENGINE COOLING SYSTEM > KR15DDT > PERIODIC MAINTENANCE > SUB RADIATOR COOLANT Figure 1
Source components: ENGINE.
Source record 11007003 at NHTSANHTSA communication ID: 11006997
NHTSA source summary · Original PDF not reviewed by Recallfolio
WATER LEAKING FROM REAR WIPER ARM PIVOT SEAL APPLIED VEHICLES: 2021-2024 Rogue (T33) APPLIED DATES: VINs starting with 5N1 built on or before October 1, 2021 VINs starting with JN8 built on or before April 7, 2024 IF YOU CONFIRM Water is found to be leaking around the rear window wiper arm pivot seal after performing a water soak test. ACTION Replace the rear window wiper arm pivot seal with the one listed in PARTS INFORMATION on page 3. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.
Source components: STRUCTURE:BODY.
Source record 11006997 at NHTSANHTSA communication ID: 11004967
NHTSA source summary · Original PDF not reviewed by Recallfolio
BCM SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Source components: ELECTRICAL SYSTEM.
Source record 11004967 at NHTSANHTSA communication ID: 11004966
NHTSA source summary · Original PDF not reviewed by Recallfolio
INTELLIGENT KEY UNIT SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Source components: ELECTRICAL SYSTEM.
Source record 11004966 at NHTSANHTSA communication ID: 11004964
NHTSA source summary · Original PDF not reviewed by Recallfolio
REAR DOOR ALERT SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Source components: ELECTRICAL SYSTEM.
Source record 11004964 at NHTSANHTSA communication ID: 11001201
NHTSA source summary · Original PDF not reviewed by Recallfolio
WINDOW GLASS WARRANTY INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Source components: VISIBILITY/WIPER.
Source record 11001201 at NHTSANHTSA communication ID: 11001194
NHTSA source summary · Original PDF not reviewed by Recallfolio
REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Source components: VISIBILITY/WIPER.
Source record 11001194 at NHTSANHTSA communication ID: 11001191
NHTSA source summary · Original PDF not reviewed by Recallfolio
WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Source components: VISIBILITY/WIPER.
Source record 11001191 at NHTSANHTSA communication ID: 11001650
NHTSA source summary · Original PDF not reviewed by Recallfolio
DIAGNOSING DOOR LOCK OPERATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Source components: STRUCTURE:BODY.
Source record 11001650 at NHTSANHTSA communication ID: 11001652
NHTSA source summary · Original PDF not reviewed by Recallfolio
VIBRATION AND/OR NOISE FROM THE REAR OF THE VEHICLE WHEN TURNING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Source components: POWER TRAIN.
Source record 11001652 at NHTSANHTSA communication ID: 11001208
NHTSA source summary · Original PDF not reviewed by Recallfolio
AUTOMATIC EMERGENCY BRAKING WARNING LIGHT BLINKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Source components: ELECTRICAL SYSTEM · FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING.
Source record 11001208 at NHTSANHTSA communication ID: 10251541
NHTSA source summary · Original PDF not reviewed by Recallfolio
DRIVER (LH) SIDE ENGINE INSULATOR MOUNT REPLACEMENT SERVICE INFORMATION Refer to the SERVICE PROCEDURE in this bulletin for instruction on how to replace the Driver (LH) Side Engine Insulator Mount for KR15 and PR25 engines. HINT: The ESM will be updated with this procedure at a later date. ï· KR15DDT Driver (LH) Side Engine Insulator Mount Replacement: Pages 2 â 4 ï· PR25DD Driver (LH) Side Engine Insulator Mount Replacement: Pages 5 â 7
Source components: ENGINE AND ENGINE COOLING.
Source record 10251541 at NHTSA