Original record summaries, dates and identifiers for this model-year. Records 201–234 of 234, ordered newest first. Dated records on this page: Oct 14, 2020–Apr 21, 2021.
Read the applicability before drawing a conclusion.
This archive includes service bulletins, warranty notices, software instructions and other communications. Records may repeat or supersede earlier instructions. A model-year association is not proof that a document covers every engine, trim, VIN or reported symptom, or that a repair is free.
NHTSA download snapshot: Sep 28, 2026. These are communication associations for this vehicle, not unique defects. How records are joined and counted.
Apr 21, 2021Service Bulletin/Repair Instructions
NTB21-032
NHTSA communication ID: 10191949
NHTSA source summary · Original PDF not reviewed by Recallfolio
2021 ROGUE; WARNING LIGHTS FLASHING ON THE INSTRUMENT PANEL WITH DTC P18A5 STORED IF YOU CONFIRM The Electric Shift Control System and the Electronic Parking Brake System warning lights are ON, with DTC P18A5 (AUTO PARK FUNCTION CANCEL) stored. Electric Shift Control System warning light Electronic Parking Brake System warning light ACTION 1. Configure the TCM and ABS control unit (see Service Procedure on page 2). 2. Clear DTCs.
NHTSA source summary · Original PDF not reviewed by Recallfolio
TELEMATICS (IVC) SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Anti-Lock Braking System (ABS)/Vehicle Dynamic Control (VDC) Reprogramming Voluntary Service Campaign Dealer Announcement: Nissan is conducting a Voluntary Service Campaign to reprogram the Anti-Lock Braking System (ABS)/Vehicle Dynamic Control (VDC) control unit on affected vehicles. The reprogramming will improve vehicle stability during an evasive double lane-change driving maneuver. What Dealers Should Do: 1.Verify if vehicles are affected by this Voluntary Service Campaign using Service Comm or DBS National Service History â Open Campaigns I.D. P1A01. 2.Dealers are requested to reprogram any affected vehicles in dealer new or pre-owned inventory to ensure customer satisfaction. â¢New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). ï§Refer to NPSB15-460 for additional information 3.Dealers should use NTB21-030 to service any vehicles subject to this campaign. 4.Once reprogrammed, dealers should submit the claim, using the claims coding provided, and release the vehicle.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Subject: Service Campaign Pre-Announcement Be advised a service campaign will be identified in Service Comm on Friday, April 16, 2021 to reprogram the ABS control unit on 2021 model year Nissan Rogue. The TSB and software will be available on ASIST when Service Comm goes live. A dealer announcement for this service campaign will be forthcoming later in the day on Friday, April 16th. Stop Sale = N Parts = Not Required IMPORTANT: Before attempting this update, dealers must ensure their CONSULT III Plus has been updated to the current date. Failure to use the latest CONSULT operating software version can damage the ABS Control Unit.
NHTSA source summary · Original PDF not reviewed by Recallfolio
VOLUNTARY SERVICE CAMPAIGN ABS/VDC REPROGRAMMING INTRODUCTION Nissan is conducting this voluntary service campaign on certain specific model year 2021 Rogue models, to inspect, and if applicable, reprogram the ABS/VDC control unit. This service will be performed at no charge to the customer for parts or labor. IDENTIFICATION NUMBER Nissan has assigned identification number P1A01 to this campaign. This number must appear on all communication and documentation of any nature dealing with this campaign. DEALER RESPONSIBILITY Dealers are to repair vehicles falling within range of this campaign that enter the service department. This includes vehicles purchased from private parties, vehicles presented by transient (tourists) owners, and vehicles in a dealerâs inventory.
NHTSA source summary · Original PDF not reviewed by Recallfolio
TELEMATICS SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2021 ROGUE; DTC P0780 STORED IN THE TCM This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2021 ROGUE; DTC P0780 STORED IN THE TCM IF YOU CONFIRM DTC P0780 (SHIFT ERROR) is stored in the TCM. This DTC may be in PAST or CURRENT status. ACTION 1. Confirm the current TCM part number. 2. Reprogram the TCM, if applicable. 3. Perform the ESM DTC Confirmation Procedure.
NHTSA source summary · Original PDF not reviewed by Recallfolio
PREVENT FRONT AXLE THREAD DAMAGE DURING NUT REMOVAL SERVICE INFORMATION If an Applied Vehicle needs to have a front axle nut removed, for any reason, the staking of the nut into the axle keyway must first be removed. The essential tool (part number # J-52982, Figure 1) required to remove the nut staking, is called out as a âCape Chiselâ in the Electronic Service Manual (ESM), and must be used to prevent thread damage to the axle (see Figure 2 on page 2). ï· The Cape Chisel arrived at dealers in December of 2020. ï· Damaged threads, due to improper removal of the stake placed in the nut, will not be covered by warranty. For information on using the Cape Chisel, refer to the Electronic Service Manual (ESM): Section TRANSMISSION & DRIVELINE > FRONT AXLE > REMOVAL AND INSTALLATION > FRONT DRIVE SHAFT > LH/RH.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
STRUT AND SHOCK ABSORBER REPLACEMENT GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NHTSA source summary · Original PDF not reviewed by Recallfolio
SOFTWARE UPDATE POP-UP NOTIFICATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2021 MAXIMA AND ROGUE, 2020-2021 TITAN AND TITAN XD; TELEMATICS (IVC) SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.
Source components: ELECTRICAL SYSTEM · EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Fuel Pump Inspection Dealer Inventory *****Dealer Announcement***** Nissan is issuing a quality hold and conducting a dealer inventory quality action to inspect the fuel pump installation on 1,002 specific model year 2021 Rogue vehicles identified in Service Comm. Due to a manufacturing concern that has since been resolved, the fuel pump lock ring installation may not be complete, the fuel pump lock ring engagement may not be fully engaged, and/or the fuel feed tube locking clip at the low pressure fuel pump may not be fully installed on the applicable vehicles. Dealers should follow the procedure to remedy any of these conditions, if identified during the inspection. Affected vehicles are subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. Dealers must complete the inspection and if necessary, repair, prior to sale. *****What Dealers Should Do***** PLEASE FOLLOW THE ATTACHED INSPECTION INSTRUCTIONS: 1. Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History â Open Campaigns I.D. PC791 ⢠New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). ï§ Refer to NPSB 15-460 for additional information ⢠Please continue to check newly arriving inventory for campaign applicability. 2. Please do not drive, loan, sell or trade the specific vehicles in dealer inventory subject to this quality action. 3. Use the attached procedure to inspect and, if necessary, remedy any vehicles affected by this quality action. 4. The service department should submit the applicable warranty claim for the action performed so it can be closed on Service Comm and release the vehicle.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Right Side Wheel Nut Inspection Dealer Inventory *****Dealer Announcement***** Nissan is conducting a dealer inventory quality action to inspect the right side front and rear wheel and tire assembly wheel nuts and, if necessary, replace with the correct wheel nuts on 12 specific model year 2021 Rogue vehicles identified in Service Comm. Due to a manufacturing concern that has since been resolved, the installed wheel nuts may not meet Nissanâs design specifications for the Rogue. Affected vehicles are subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. *****What Dealers Should Do***** PLEASE FOLLOW THE ATTACHED INSPECTION INSTRUCTIONS: 1. Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History â Open Campaigns I.D. PC790 ⢠New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). ï§ Refer to NPSB 15-460 for additional information ⢠Please continue to check newly arriving inventory for campaign applicability. 2. Please do not drive, loan, sell or trade the specific vehicles in Dealer Inventory subject to this quality action. 3. Use the attached procedure to inspect the right side wheel nuts and, if necessary, remedy any vehicles affected by this quality action. 4. Once remedied, dealers may submit the applicable warranty claim for the action performed and release the vehicle.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2021 ROGUE; AV CONTROL UNIT REPLACEMENT PROCESS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2021 ROGUE AND 2020 SENTRA; INTELLIGENT KEY UNIT SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY, below. Please discard previous versions of this bulletin.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2021 MAXIMA AND ROGUE, 2020-2021 TITAN AND TITAN XD; TELEMATICS (IVC) SERVICE INFORMATION SERVICE INFORMATION The vehicles listed under APPLIED VEHICLES that come equipped with a factory installed SOS switch, located near the overhead map lamp, also come equipped with a wireless communication device called a Telematics Communication Unit (TCU). With an active NissanConnect Services⢠subscription, the TCU communicates with the Nissan Data Center to provide various security and convenience services. This bulletin contains important service procedures that must be performed properly in order to set up and maintain the telematics/in-vehicle communications (IVC) system for the vehicles listed under APPLIED VEHICLES. ï· A table has been provided, on the next page, that lists the steps required to successfully configure a TCU after it has been replaced. ï· A check-off sheet has been provided in this bulletin to print and check off steps as they are completed. Staple the completed check-off sheet to the repair order.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Final All Wheel Drive Clutch Break-In Update January 22, 2021 Please discard earlier versions of this bulletin. The announcement from November 24, 2020 has been revised to include: - Additional affected vehicles have been identified, thus the dealer inventory population has increased. Affected vehicles are either currently in dealer inventory or assigned and in transit to the dealer. Please continue to check newly arriving inventory for campaign applicability. Remaining affected inventory should arrive at dealers by the first week of February.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2021 ROGUE; REMOTE ENGINE START SERVICE INFORMATION To use the Remote Engine Start (RES) feature, the following conditions must be met: ï· The RES has been turned ON using C-III plus. ï Enabling/disabling RES is no longer available as a combination meter selection. ï· The ignition is OFF. ï· The shift selector is in the âPâ (park) position. ï· The hood, doors, and hatch are closed. ï· The hazard warning lights are OFF. ï· The Intelligent Key is within 197 feet (60 m) of the vehicle, and there are no obstructions between the Intelligent Key and the vehicle. ï· The vehicle is already locked (this must be done using the Intelligent Key or the request switch on the exterior door handle).
NHTSA source summary · Original PDF not reviewed by Recallfolio
Shift Lever Hang Tag Dealer Inventory *****Dealer Announcement***** Nissan is conducting a dealer inventory quality action to place a Hang Tag on the shift lever on 16,253 specific 2021 Rogue vehicles identified in Service Comm. This tag puts instructions on the operation of the newly designed electronic shifter conspicuously right at the driverâs hand. Further detailed instructions are available in the Quick Reference Guide and Ownerâs Manual. Vehicles manufactured after mid-December will have the hang tag in place. Affected vehicles are not subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. *****What Dealers Should Do***** PLEASE FOLLOW THE ATTACHED INSPECTION INSTRUCTIONS: 1. Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History â Open Campaigns I.D. PC779 ⢠New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). ï§ Refer to NPSB 15-460 for additional information ⢠Please continue to check newly arriving inventory for campaign applicability. 2. Use the attached procedure to remedy vehicles affected by this quality action. ⢠Dealers will receive one (1) hang tag for every affected vehicle in dealer inventory via FedEx. Tags will be sent to the Service Managerâs attention. ï§ Hang tags will begin mailing January 22, 2021 and should arrive no later than January 29, 2021. ⢠If replacement tags are needed, please send your request to: ï§ CampaignAnnouncements@nissan-usa.com along with your dealer name, address, VIN, contact name and phone number. 3. The service department should submit the applicable warranty claim for the action performed so it can be closed on Service Comm.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Left Front Combination Lamp Dealer Inventory *****Dealer Announcement***** Nissan is conducting a dealer inventory quality action to inspect the left front combination lamp and, if necessary, replace it on 15,619 specific model year 2021 Rogue vehicles identified in Service Comm. Due to a manufacturing concern that has since been resolved, the installed combination lamp lens may develop a crack that could cause the lamp to fog. Affected vehicles are not subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. *****What Dealers Should Do***** PLEASE FOLLOW THE ATTACHED INSPECTION INSTRUCTIONS: 1. Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History â Open Campaigns I.D. PC778 ⢠New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). ï§ Refer to NPSB 15-460 for additional information ⢠Please continue to check newly arriving inventory for campaign applicability. 2. Use the attached procedure to inspect the left front combination lamp assembly and, if necessary, remedy any vehicles affected by this quality action: ⢠A unique campaign repair procedure has resulted in a more efficient repair process and reduced flat rate time. ⢠Dealers may order parts, as needed, via DBS starting January 12, 2021. ï§ DBS placed orders will begin fulfillment on January 15, 2021 in the order they are received. NOTE: Parts replaced under this activity will be placed on parts return. Monitor the Warranty Parts Return Website located at NNAnet.com for notifications. ⢠Dealers ordering parts via normal parts ordering process begins on February 9, 2021. 3. The service department should submit the applicable warranty claim for the action performed so the campaign can be closed on Service Comm.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2021 ROGUE; AWD COUPLER SERVICE INFORMATION SERVICE INFORMATION The AWD coupler on the APPLIED VEHICLE listed above, is available as a separate service part. When replacement of the AWD coupler is required, DO NOT follow the ESM procedure. Instead, follow the procedure outlined in this service bulletin.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE · EQUIPMENT.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2021 ROGUE; INTELLIGENT KEY UNIT DTC B203D-14 DIAGNOSTIC PROCEDURE SERVICE INFORMATION DTC B203D-14 indicates a concern in the circuit between the inside key antenna and the intelligent key control unit. Currently, the ESM does not have a diagnosis or repair procedure for DTC B203D-14. When DTC B203D-14 is confirmed, perform the diagnosis and repair procedures, outlined in the ESM, for DTC B203C-14. ï· For DTC B203C-14 diagnosis and repair procedure, refer to the ESM section: BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY > DOOR & LOCK >DTC/CIRCUIT DIAGNOSIS > B203C-14 INSIDE ANTENNA.
Source components: ELECTRICAL SYSTEM · STRUCTURE:BODY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
TELEMATICS CONTROL UNIT RESET AFTER AUTOMATIC COLLISION NOTIFICATION SERVICE INFORMATION The Telematics Control Unit (TCU) has the ability to send an automatic collision notification when the vehicle is involved in an accident. Once an automatic collision notification is performed, the function becomes disabled. The TCU must be reset to re-enable the automatic collision notification function. This bulletin describes how to reset the TCU after an automatic collision notification has been performed.
NHTSA source summary · Original PDF not reviewed by Recallfolio
INTELLIGENT KEY UNIT DTC P161D STORED IN THE ECM SERVICE INFORMATION DTC P161D (IMMOBILIZER) will not cause: ï· The MIL to turn ON. ï· The Remote Engine Start to become inoperative. ï· The âNo Key Detectedâ message to appear. ï· An impact to any of the vehicleâs functions or performance. If other DTCs are stored with P161D, perform the diagnosis and repair procedures, outlined in the ESM, for the other DTCs first. ï· After the other DTCs have been resolved and P161D does not clear, proceed with the diagnosis and repair, outlined in the ESM, for DTC P161D.
Source components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM) · EQUIPMENT.
NHTSA source summary · Original PDF not reviewed by Recallfolio
Final All Wheel Drive Clutch Break-In Dealer Announcement: Nissan is conducting a dealer inventory quality action to complete the final all-wheel drive (AWD) clutch break-in process on 5,789 2021 Nissan Rogue vehicles identified in Service Comm. Due to a design issue, that has since been corrected, Nissan has determined that the break-in process was not properly completed on the subject vehicles. As a result, customers may experience a vibration felt through the floorboard while making a ninety (90) degree turn. Affected vehicles are subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. What Dealers Should Do: PLEASE FOLLOW THE ATTACHED REPAIR INSTRUCTIONS: 1.Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History â Open Campaign I.D. P0A33 â¢New vehicles in dealer inventory can also be identified by using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). ï§Refer to NPSB 15-460 for additional information â¢Some vehicles may still be in transit. Please continue to check newly arriving inventory for applicability. 2.Please do not drive, sell, loan, or trade the specific vehicles in Dealer Inventory subject to this Quality Action. 3.Use the attached procedure to complete the final all-wheel drive clutch break-in process prior to retail delivery of the vehicle. 4.Once remedied, dealers may submit the applicable warranty claim for the action performed and release the vehicle. Dealer Responsibility: It is the dealerâs responsibility to check Service Comm or DBS National Service History â Open Campaign using the appropriate campaign I.D for the inspection status on each affected vehicle currently in new vehicle inventory. Thank you for your prompt attention to this matter.
Source components: EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2021 ROGUE; VIBRATION FROM REAR WHILE TURNING AT LOW SPEED IF YOU CONFIRM The customer experiences a vibration or a stick/slip/binding feeling from the rear of the vehicle when turning at low speed. ACTION Perform the AWD coupler clutch break-in procedure.
Source components: ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM · POWER TRAIN.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2021 ROGUE; AV CONTROL UNIT REPLACEMENT PROCESS IF YOU CONFIRM The AV control unit needs to be replaced on an APPLIED VEHICLE. ACTION IMPORTANT: The AV control unit for the applied vehicle is new, different from the previous model year, and requires a new procedure when replacing. If the following procedures are not followed completely, all features will not work as intended. 1. Replace the AV control unit 2. Reprogram the AV control unit 3. Configure the AV control unit 4. Write the VIN to the AV control unit (Manual Input) IMPORTANT: Procedures 2-4 above must be performed in the order shown below.
Source components: ELECTRICAL SYSTEM · EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY.
NHTSA source summary · Original PDF not reviewed by Recallfolio
REAR DOOR ALERT SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NHTSA source summary · Original PDF not reviewed by Recallfolio
2021 ROGUE AND 2020 SENTRA; BCM SERVICE INFORMATION SERVICE INFORMATION ï· When replacing the BCM, ALWAYS replace it with a new one. ï· Module configuration MUST BE performed before pairing the BCM and intelligent key unit. Once the BCM and intelligent key unit have been paired, portions of the configuration are locked and can no longer be changed. ï· When replacing the BCM, it is critical to follow the work procedure as detailed in the ESM. ï For Rogue, go to ELECTRICAL & POWER CONTROL > BODY CONTROL SYSTEM > BASIC INSPECTION > ADDITIONAL SERVICE WHEN REPLACING BCM. ï For Sentra, go to ELECTRICAL & POWER CONTROL > BODY CONTROL SYSTEM > BASIC INSPECTION > INSPECTION & ADJUSTMENT > ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM).
NHTSA source summary · Original PDF not reviewed by Recallfolio
2021 ROGUE AND 2020 SENTRA; INTELLIGENT KEY UNIT SERVICE INFORMATION SERVICE INFORMATION ï· When replacing the intelligent key unit (hands free module), ALWAYS replace it with a new one. ï· Module configuration MUST BE performed before NATS initialization (key registration). Once NATS initialization has been performed, portions of the configuration are locked and can no longer be changed. ï· When replacing the intelligent key unit, it is critical to follow the work procedure as detailed in the ESM. ï For Rogue, go to BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY >DOOR & LOCK > BASIC INSPECTION > ADDITIONAL SERVICE WHEN REPLACING INTELLIGENT KEY UNIT. ï For Sentra, go to BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY >DOOR & LOCK > BASIC INSPECTION > INTELLIGENT KEY UNIT >ADDITIONAL SERVICE WHEN REPLACING INTELLIGENT KEY UNIT.