The vehicle dossier US · 2008
2008 Nissan
ALTIMAProblems & recalls
1,028 distinct owner reports in the NHTSA snapshot. Body & structure appears in 312 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 1,028 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 15 years with reports.
70,000 miles is the median among 684 reports with usable mileage. The middle half spans 40,000–102,000 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
4 recall campaigns on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)Campaign 10V401000
Reported concern
NISSAN IS RECALLING CERTAIN VEHICLES THAT WERE EQUIPPED WITH A GARMIN NUVI MODEL 750 NAVIGATION SYSTEM. THE BATTERIES CONTAINED IN THE AFFECTED GPS UNITS CAN OVERHEAT.
Manufacturer’s stated response
NISSAN WILL NOTIFY OWNERS AND THE REPAIRS WILL BE PERFORMED BY GARMIN TECHNICIANS BY REPLACING THE BATTERY AND INSERTING A SPACER ON TOP OF THE BATTERY FREE OF CHARGE. THE SAFETY RECALL BEGAN ON SEPTEMBER 16, 2010. OWNERS MAY CONTACT GARMIN DIRECTLY AT 1-866-957-1981 OR NISSAN AT 1-800-647-7261.
Read campaign 10V401000 at NHTSAELECTRICAL SYSTEM:SOFTWARECampaign 08V521000
Reported concern
NISSAN IS RECALLING 204,361 MY 2007-2008 ALTIMA, ALTIMA HYBRID, 350Z, 350Z ROADSTER, MY 2008 ALTIMA COUPE, ROGUE, MY 2009 MURANO, AND INFINITI MY 2007-2008 G35 SEDAN, MY 2008 G37 COUPE AND EX35 PASSENGER VEHICLES EQUIPPED WITH CONTINENTAL AUTOMOTIVE SYSTEMS' OCCUPANT CLASSIFICATION SYSTEM (OCS) CONTROL UNITS. A VARISTOR IN THE OCS CONTROL UNIT LOCATED IN THE PASSENGER SEAT CUSHION MAY HAVE BEEN MANUFACTURED OUT OF SPECIFICATION. UNDER CERTAIN CONDITIONS, THIS COULD CAUSE AN INTERRUPTION OF SIGNAL BETWEEN THE OCS AND THE AIR BAG CONTROL UNIT (ACU).
Manufacturer’s stated response
DEALERS WILL TEST THE SIGNAL BETWEEN THE OCS AND ACU SYSTEMS USING A SPECIAL TOOL TO CHECK THAT IT IS FUNCTIONING AS DESIGNED. IF NECESSARY, THE SEAT CUSHION (CONTAINING OCS HARDWARE) WILL BE REPLACED WITH A NEW ONE MANUFACTURED TO SPECIFICATION. THE RECALL BEGAN ON NOVEMBER 4, 2008. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261 OR INFINITI AT 1-800-662-6200.
Read campaign 08V521000 at NHTSASUSPENSIONCampaign 08V363000
Reported concern
NISSAN IS RECALLING 1,018 MY 2008 ALTIMA VEHICLES. THE LEFT SIDE FRONT SUSPENSION TRANSVERSE LINK BOLT MAY NOT HAVE BEEN TIGHTENED TO SPECIFICATION. THIS CONDITION COULD CAUSE THE BOLT TO BECOME LOOSE WHILE THE VEHICLE IS BEING DRIVEN.
Manufacturer’s stated response
DEALERS WILL TIGHTEN THE TRANSVERSE LINK BOLT TO SPECIFICATION FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 11, 2008. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.
Read campaign 08V363000 at NHTSAELECTRICAL SYSTEM:IGNITION:MODULECampaign 07V599000
Reported concern
ON CERTAIN PASSENGER VEHICLES THAT HAVE HAD THE BODY CONTROL MODULE (BCM) REPLACED DURING SERVICE AT A DEALERSHIP, THE TIRE PRESSURE MONITORING SYSTEM (TPMS) MAY HAVE BEEN INADVERTENTLY DEACTIVATED DUE TO AN ISSUE WITH THE DEALER SERVICE SOFTWARE. IF THE TPMS IS TURNED OFF, IT WOULD NOT ALERT THE DRIVER TO A DECREASE IN THE TIRE PRESSURE AS DESIGNED.
Manufacturer’s stated response
DEALERS WILL CHECK THE TPMS FUNCTION AND REACTIVATE IT IF NECESSARY. THE RECALL BEGAN ON JANUARY 18, 2008. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.
Manufacturer campaign: P7267
Read campaign 07V599000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
117 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
NTB09-131CCERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (F…NHTSA ID 11031705
CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11031705 at NHTSANTB09-131CCERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (F…NHTSA ID 11031704
CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).
Components: STRUCTURE:BODY. Confirm detailed applicability in the original document.
Source record 11031704 at NHTSANTB13-107GVEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 11004962
VEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11004962 at NHTSANTB13-027DCAN COMMUNICATION – NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 11004961
CAN COMMUNICATION – NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11004961 at NHTSANTB10-066CCAN COMMUNICATION CODES – DIAGNOSTIC TIPS AND GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 11004960
CAN COMMUNICATION CODES – DIAGNOSTIC TIPS AND GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11004960 at NHTSANTB17-019HWINDOW GLASS WARRANTY INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 11001201
WINDOW GLASS WARRANTY INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: VISIBILITY/WIPER. Confirm detailed applicability in the original document.
Source record 11001201 at NHTSANTB13-028IREMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 11001194
REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: VISIBILITY/WIPER. Confirm detailed applicability in the original document.
Source record 11001194 at NHTSANTB09-081KWINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 11001191
WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: VISIBILITY/WIPER. Confirm detailed applicability in the original document.
Source record 11001191 at NHTSANTB08-097LDIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 10243708
DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: STEERING. Confirm detailed applicability in the original document.
Source record 10243708 at NHTSANTB23-053SILICONE-BASED LUBRICANT OR GREASE CAN DAMAGE ELECTRICAL COMPONENTS SERVICE INFORMATION Do not apply Silicone-based lubricants or grease to, or around, any interior electrical components. To avoid the risk of death or severe pe…NHTSA ID 10239062
SILICONE-BASED LUBRICANT OR GREASE CAN DAMAGE ELECTRICAL COMPONENTS SERVICE INFORMATION Do not apply Silicone-based lubricants or grease to, or around, any interior electrical components. To avoid the risk of death or severe personal injury, do not directly spray Silicone-based lubricant or grease, or inadvertently overspray Silicone-based lubricant or grease onto any interior electrical components. These types of lubricants can be detrimental to the proper operation of electrical components.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 10239062 at NHTSANTB23-04912 VOLT BATTERY TESTING FOR IN-SERVICE VEHICLES SERVICE INFORMATION The following Service Information lists NNA procedural recommendations for establishing good connections while performing 12V battery testing. These recommenda…NHTSA ID 10239060
12 VOLT BATTERY TESTING FOR IN-SERVICE VEHICLES SERVICE INFORMATION The following Service Information lists NNA procedural recommendations for establishing good connections while performing 12V battery testing. These recommendations are expected to promote uniformity during the connection process, therefore reducing the number of incorrect âTest with DCAâ and âReplaceâ results. HINT: If 12 volt batteries are allowed to discharge for a prolonged period of time, battery life may be drastically reduced. This condition may lead to premature battery replacement and customer dissatisfaction. IMPORTANT: ï· CPX-900 is now an accepted testing tool to use along with or in place of the DSS-5000 ï· CPX-900 operating instructions are found at: https://nissancpx900.midtronics.com/ ï· DSS-5000 operating instructions are found at: https://nissandss5000.midtronics.com/ ï· DCA-8000 is now a required testing tool to be used for all warranty replacement decisions. The DCA-8000 is also a more efficient charger than previously available, and will charge any available 12 volt lead acid battery safely and accurately as long as all precautions and inputs are made correctly. The DCA-8000 operating instructions are found at: https://nissandca8000.midtronics.com/
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 10239060 at NHTSANTB13-107FVEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.NHTSA ID 10235707
VEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 10235707 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
Brake Master Cylinder Internal LeakPE11020
The Office of Defects Investigation (ODI) opened PE11-020 to investigate possible brake performance loss due to brake fluid leaking from the master cylinder into the brake booster in the subject vehicles.A total of 237 complaints were identified by ODI and Nissan.The majority of complaints and warranty claims reported that brake malfunction indicator lamp (MIL) illumination as the only symptom of a problem.Only 12 complaints alleged any effect on brake performance and in each of these the drivers were able to stop the vehicles without incident.No crash claims could be attributed to the alleged defect. Returned part analysis data provided by Nissan showed that most of the master cylinders replaced under warranty did not have a leak condition.These replacements may have resulted from brake MIL illumination due to pad wear.For most of the warranty claims, in a few cases where a master cylinder leak was found, Nissan's testing showed that the leaks were extremely slow and would require thousands of miles or months of driving before brake performance could be affected.After an extensive study of replaced master cylinders for a presumed leak, Nissan was unable to identify any concern with the parts or design of the subject components that could affect brake performance. Nevertheless, Nissan does recognize a concern with premature brake MIL illumination and has decided to address this problem by conducting a voluntary service campaign covering approximately 1.17 million model year 2007 through 2012 Altima vehicles (up to June 25, 2011 production, the date of Nissan's running change for the longer life brake pad).Nissan's owner letter for the service campaign states, As your brake pads wear over time, the brake fluid level in the master cylinder reservoir will drop and may cause the brake warning lamp to illuminate.?Although this is a normal condition, there has been concern that the brake warning light illumination may be caused by a slow fluid leak over time.Nissan's service campaign will inspect the brake pads and test the master cylinder for leakage.If leakage is detected, Nissan will replace the master cylinder at no charge.If excessive pad wear is observed, customers will be notified and will be responsible for repairs.For more details concerning Nissan's service campaign, see the PE11-020 file on www.Safercar.gov. Based on the low failure rate for confirmed master cylinder leakage in the subject vehicles and the low probability that the condition would affect brake performance, this investigation is closed.
Recorded closure: Mar 14, 2012
Find investigation PE11020Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.